superrob1500
/
mirror-linux
mirror of https://github.com/torvalds/linux
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Qualcomm ARM64 DTS fixes for 6.2 

The cluster idle issue was resolved on SM8250, so the change disabling
 the cluster state is being reverted.
 
 Issues where identified with the QMP PHY binding, that would prevent
 enablement of Displayport and it was decided not to support the old
 binding for the recently introduced SC8280XP, which broke USB. This
 adjusts the USB PHY nodes to the new binding. The reset signal for the
 first QMP PHY is corrected as well.
 
 The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P,
 to avoid instabilities caused by use of protected memory regions.
 The compatible for the MSM8992 TCSR mutex is corrected as well.
 
 Lastly SDHCI interconnects on SM8350 are corrected to match the
 providers #interconnect-cells.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmO92m0VHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FG+cP/2aQR0XNa5//h32cqk9rz31Aqowr
 a87I/flkMW0ZX1GZ65MoBUM9nn3m9fysVUf13PiduAlnmQ9GwcWoXClCfe7Lysgt
 Evyc7JHZ1OUrOe9ibEiXlA/z78ETed+L38t3xE38wJkJBkl/POooXB5Cgb71rl18
 2lfx1Z2sZGG7NevZG5RZQl6pmK+v+d0lnBOucJwPuyupyR6HjZ41+RFzbXUNpxK0
 hvdnXTiQENVULCeMKKc9pkmRSk5A+Fyj6L/Nl1VTtVtIxVOlqpAbK28jI+WjhTaF
 psQ1ebyBocdN1Uh4W8dcydvhycaHDvvA/4nfob3qRdxh5DoUjfPzbsUVA//MXytz
 zatvjMN/XwVGbpSmBBy0U2T5gymEW2wFGv1T6t1AXFtSjJdBXI6txvzjMHI1yFOM
 +lGVyDawE9B9NOU2MW/vZDfaCZmUrwmFHCGa9bKkAZ5GSgHvZu3eatSn/oUWm4bi
 2s0jTtyb6zZmNadYXrQu+7LsmHfCtzCUuREAFua17ZOQeYzd3RuzM6tr9+Sf0bKz
 1edYcg74tYJOMzQ4I5rvDfhCDdg7xAIV573qZ4CfIayzX2gfFLxH8aUey6V9HEXv
 84n83eSSZHL6QXL34MxNXeN6YBw3AQrCuaewkdP8ogXqOnXltq9a4iP+oAgnyEQo
 sPuq4RemWxtwsmjS
 =ZCnd
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmO94fwACgkQmmx57+YA
 GNlVyg//UtX0t/4AtA8aaHOqG1WDXc3nY6haOq8VpV/Fh4IJewWher5wJxiQSLDm
 mRpjVFaPizugU7zDQcLIj4j+QdKezT+IGcQ4H1kUco2cVxez/+XOqu81HCAdAYav
 s5IStil9eEnZa+7cR96rmBmvkc0fwHnBZk6gYr0CeViOxAb1bcxAZpPWBqsIbI6m
 VmvCsf3wAWOYIqj1Ofzj7+psZJui3+WhOkGpzalpnAmB1APtHT7G+Gjs+2u4pV5U
 6K0m2oq/PAbrNcaZhKK5bOC/EfWuHyUsbOf8BMcID+TU6j2s6DPHoZNFgYqoaZHV
 J6C4K/bxM7IMbKH4uZy/VxtIFlstCdU8OD37gk2M1TvrF0dElAeZCAt5gXTEwNiI
 0BZ6Rz4+iv4vBvRzRZm9dNo0eypAGRoxODxTqOVoqNMAuzvc6t/mz95oXG00TRfQ
 Vs9LjnZDwbRWNMkrg1qoGDtCTwUiXasKKwfyHKJp4Vy1hbSZ22ww6cugecvVfc1g
 OOYsVNtoyInki4U0LryKq6fmrtTKcbkKqI5sbhgkDYeFqCEfg7R4suoGFyQkHl8n
 ZgQGtTV2ehqsU0wOOg9hm8RdBI3Bz6IwUcr9oOhMdww46bls1q2+8owOmqpa0c6L
 d1b45sb8Zt23tkjaXoquEjPqxkbUB0AR2G07ZJghBQyvCrW3GBc=
 =AYMf
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DTS fixes for 6.2

The cluster idle issue was resolved on SM8250, so the change disabling
the cluster state is being reverted.

Issues where identified with the QMP PHY binding, that would prevent
enablement of Displayport and it was decided not to support the old
binding for the recently introduced SC8280XP, which broke USB. This
adjusts the USB PHY nodes to the new binding. The reset signal for the
first QMP PHY is corrected as well.

The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P,
to avoid instabilities caused by use of protected memory regions.
The compatible for the MSM8992 TCSR mutex is corrected as well.

Lastly SDHCI interconnects on SM8350 are corrected to match the
providers #interconnect-cells.

* tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8992-libra: Fix the memory map
  arm64: dts: qcom: msm8992: Don't use sfpb mutex
  arm64: dts: msm8994-angler: fix the memory map
  arm64: dts: qcom: sm8350: correct SDHCI interconnect arguments
  Revert "arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state"
  arm64: dts: msm8992-bullhead: add memory hole region
  arm64: dts: qcom: sc8280xp: fix USB-DP PHY nodes
  arm64: dts: qcom: sc8280xp: fix primary USB-DP PHY reset

Link: https://lore.kernel.org/r/20230110213724.2183668-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull/520/merge
Arnd Bergmann 2023-01-10 23:08:59 +01:00
parent 985d7fef11 69876bc6fd
commit 23d3954765
7 changed files with 110 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
View File

@ -3,6 +3,7 @@
* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
@ -51,6 +52,11 @@
reg = <0 0x03400000 0 0x1200000>;
no-map;
};
removed_region: reserved@5000000 {
reg = <0 0x05000000 0 0x2200000>;
no-map;
};
};
};

77
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
View File

@ -11,6 +11,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
/delete-node/ &adsp_mem;
/delete-node/ &audio_mem;
/delete-node/ &mpss_mem;
/delete-node/ &peripheral_region;
/delete-node/ &rmtfs_mem;
/ {
model = "Xiaomi Mi 4C";
compatible = "xiaomi,libra", "qcom,msm8992";
@ -70,25 +76,67 @@
#size-cells = <2>;
ranges;
/* This is for getting crash logs using Android downstream kernels */
memory_hole: hole@6400000 {
reg = <0 0x06400000 0 0x600000>;
no-map;
};
memory_hole2: hole2@6c00000 {
reg = <0 0x06c00000 0 0x2400000>;
no-map;
};
mpss_mem: mpss@9000000 {
reg = <0 0x09000000 0 0x5a00000>;
no-map;
};
tzapp: tzapp@ea00000 {
reg = <0 0x0ea00000 0 0x1900000>;
no-map;
};
mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
reg = <0 0xca0b0000 0 0x10000>;
no-map;
};
rmtfs_mem: rmtfs@ca100000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xca100000 0 0x180000>;
no-map;
qcom,client-id = <1>;
};
audio_mem: audio@cb400000 {
reg = <0 0xcb000000 0 0x400000>;
no-mem;
};
qseecom_mem: qseecom@cb400000 {
reg = <0 0xcb400000 0 0x1c00000>;
no-mem;
};
adsp_rfsa_mem: adsp-rfsa@cd000000 {
reg = <0 0xcd000000 0 0x10000>;
no-map;
};
sensor_rfsa_mem: sensor-rfsa@cd010000 {
reg = <0 0xcd010000 0 0x10000>;
no-map;
};
ramoops@dfc00000 {
compatible = "ramoops";
reg = <0x0 0xdfc00000 0x0 0x40000>;
reg = <0 0xdfc00000 0 0x40000>;
console-size = <0x10000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
};
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
no-map;
};
tzapp: modem_region@ea00000 {
reg = <0x0 0xea00000 0x0 0x1900000>;
no-map;
};
};
};
@ -130,11 +178,6 @@
status = "okay";
};
&peripheral_region {
reg = <0x0 0x7400000 0x0 0x1c00000>;
no-map;
};
&pm8994_spmi_regulators {
VDD_APC0: s8 {
regulator-min-microvolt = <680000>;

4
arch/arm64/boot/dts/qcom/msm8992.dtsi
View File

@ -37,10 +37,6 @@
compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
};
&tcsr_mutex {
compatible = "qcom,sfpb-mutex";
};
&timer {
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

19
arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
View File

@ -9,9 +9,6 @@
#include "msm8994.dtsi"
/* Angler's firmware does not report where the memory is allocated */
/delete-node/ &cont_splash_mem;
/ {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
@ -28,6 +25,22 @@
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tzapp_mem: tzapp@4800000 {
reg = <0 0x04800000 0 0x1900000>;
no-map;
};
removed_region: reserved@6300000 {
reg = <0 0x06300000 0 0xD00000>;
no-map;
};
};
};
&blsp1_uart2 {

83
arch/arm64/boot/dts/qcom/sc8280xp.dtsi
View File

@ -10,6 +10,7 @@
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@ -762,7 +763,7 @@
<0>,
<0>,
<0>,
<&usb_0_ssphy>,
<&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@ -770,7 +771,7 @@
<0>,
<0>,
<0>,
<&usb_1_ssphy>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@ -1673,42 +1674,26 @@
};
};
usb_0_qmpphy: phy-wrapper@88ec000 {
usb_0_qmpphy: phy@88eb000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x088ec000 0 0x1e4>,
<0 0x088eb000 0 0x40>,
<0 0x088ed000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x088eb000 0 0x4000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_EUD_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_PRIM_GDSC>;
status = "disabled";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_0_ssphy: usb3-phy@88eb400 {
reg = <0 0x088eb400 0 0x100>,
<0 0x088eb600 0 0x3ec>,
<0 0x088ec400 0 0x364>,
<0 0x088eba00 0 0x100>,
<0 0x088ebc00 0 0x3ec>,
<0 0x088ec200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb0_phy_pipe_clk_src";
};
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
};
usb_1_hsphy: phy@8902000 {
@ -1725,42 +1710,26 @@
status = "disabled";
};
usb_1_qmpphy: phy-wrapper@8904000 {
usb_1_qmpphy: phy@8903000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x08904000 0 0x1e4>,
<0 0x08903000 0 0x40>,
<0 0x08905000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x08903000 0 0x4000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_CLKREF_CLK>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_SEC_GDSC>;
resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
<&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
power-domains = <&gcc USB30_SEC_GDSC>;
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
usb_1_ssphy: usb3-phy@8903400 {
reg = <0 0x08903400 0 0x100>,
<0 0x08903600 0 0x3ec>,
<0 0x08904400 0 0x364>,
<0 0x08903a00 0 0x100>,
<0 0x08903c00 0 0x3ec>,
<0 0x08904200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb1_phy_pipe_clk_src";
};
};
pmu@9091000 {
@ -1910,7 +1879,7 @@
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x820 0x0>;
phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
@ -1964,7 +1933,7 @@
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x860 0x0>;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};

1
arch/arm64/boot/dts/qcom/sm8250.dtsi
View File

@ -334,7 +334,6 @@
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
status = "disabled";
};
};
};

4
arch/arm64/boot/dts/qcom/sm8350.dtsi
View File

@ -2382,8 +2382,8 @@
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC2_BCR>;
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
iommus = <&apps_smmu 0x4a0 0x0>;
power-domains = <&rpmhpd SM8350_CX>;