superrob1500
/
mirror-linux
mirror of https://github.com/torvalds/linux
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

clk: baikal-t1: Remove not-going-to-be-supported code for Baikal SoC 

As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
master
Andy Shevchenko 2026-02-24 12:17:18 +01:00 committed by Stephen Boyd
parent 4d0f627aa3
commit 5d6c477687
No known key found for this signature in database
GPG Key ID: AD028897C6E49525
15 changed files with 0 additions and 2920 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

196
Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
View File

@ -1,196 +0,0 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Baikal-T1 Clock Control Unit Dividers
maintainers:
- Serge Semin <fancer.lancer@gmail.com>
description: |
Clocks Control Unit is the core of Baikal-T1 SoC System Controller
responsible for the chip subsystems clocking and resetting. The CCU is
connected with an external fixed rate oscillator, which signal is transformed
into clocks of various frequencies and then propagated to either individual
IP-blocks or to groups of blocks (clock domains). The transformation is done
by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
later ones are described in this binding. Each clock domain can be also
individually reset by using the domain clocks divider configuration
registers. Baikal-T1 CCU is logically divided into the next components:
1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
in general can provide any frequency supported by the CCU PLLs).
2) PLLs clocks generators (PLLs).
3) AXI-bus clock dividers (AXI) - described in this binding file.
4) System devices reference clock dividers (SYS) - described in this binding
file.
which are connected with each other as shown on the next figure:
+---------------+
| Baikal-T1 CCU |
| +----+------|- MIPS P5600 cores
| +-|PLLs|------|- DDR controller
| | +----+ |
+----+ | | | | |
|XTAL|--|-+ | | +---+-|
+----+ | | | +-|AXI|-|- AXI-bus
| | | +---+-|
| | | |
| | +----+---+-|- APB-bus
| +-------|SYS|-|- Low-speed Devices
| +---+-|- High-speed Devices
+---------------+
Each sub-block is represented as a separate DT node and has an individual
driver to be bound with.
In order to create signals of wide range frequencies the external oscillator
output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
then passed over CCU dividers to create signals required for the target clock
domain (like AXI-bus or System Device consumers). The dividers have the
following structure:
+--------------+
CLKIN --|->+----+ 1|\ |
SETCLK--|--|/DIV|->| | |
CLKDIV--|--| | | |-|->CLKLOUT
LOCK----|--+----+ | | |
| |/ |
| | |
EN------|-----------+ |
RST-----|--------------|->RSTOUT
+--------------+
where CLKIN is the reference clock coming either from CCU PLLs or from an
external clock oscillator, SETCLK - a command to update the output clock in
accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
the output clock stabilization, EN - enable/disable the divider block,
RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
peculiarities the dividers may lack of some functionality depicted on the
figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
clock provider just doesn't expose either switching functions, or the rate
configuration, or both of them.
The clock dividers, which output clock is then consumed by the SoC individual
devices, are united into a single clocks provider called System Devices CCU.
Similarly the dividers with output clocks utilized as AXI-bus reference clocks
are called AXI-bus CCU. Both of them use the common clock bindings with no
custom properties. The list of exported clocks and reset signals can be found
in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
to be a children of later one.
if:
properties:
compatible:
contains:
const: baikal,bt1-ccu-axi
then:
properties:
clocks:
items:
- description: CCU SATA PLL output clock
- description: CCU PCIe PLL output clock
- description: CCU Ethernet PLL output clock
clock-names:
items:
- const: sata_clk
- const: pcie_clk
- const: eth_clk
else:
properties:
clocks:
items:
- description: External reference clock
- description: CCU SATA PLL output clock
- description: CCU PCIe PLL output clock
- description: CCU Ethernet PLL output clock
clock-names:
items:
- const: ref_clk
- const: sata_clk
- const: pcie_clk
- const: eth_clk
properties:
compatible:
enum:
- baikal,bt1-ccu-axi
- baikal,bt1-ccu-sys
reg:
maxItems: 1
"#clock-cells":
const: 1
"#reset-cells":
const: 1
clocks:
minItems: 3
maxItems: 4
clock-names:
minItems: 3
maxItems: 4
additionalProperties: false
required:
- compatible
- "#clock-cells"
- clocks
- clock-names
examples:
# AXI-bus Clock Control Unit node:
- |
#include <dt-bindings/clock/bt1-ccu.h>
clock-controller@1f04d030 {
compatible = "baikal,bt1-ccu-axi";
reg = <0x1f04d030 0x030>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&ccu_pll CCU_SATA_PLL>,
<&ccu_pll CCU_PCIE_PLL>,
<&ccu_pll CCU_ETH_PLL>;
clock-names = "sata_clk", "pcie_clk", "eth_clk";
};
# System Devices Clock Control Unit node:
- |
#include <dt-bindings/clock/bt1-ccu.h>
clock-controller@1f04d060 {
compatible = "baikal,bt1-ccu-sys";
reg = <0x1f04d060 0x0a0>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&clk25m>,
<&ccu_pll CCU_SATA_PLL>,
<&ccu_pll CCU_PCIE_PLL>,
<&ccu_pll CCU_ETH_PLL>;
clock-names = "ref_clk", "sata_clk", "pcie_clk",
"eth_clk";
};
# Required Clock Control Unit PLL node:
- |
ccu_pll: clock-controller@1f04d000 {
compatible = "baikal,bt1-ccu-pll";
reg = <0x1f04d000 0x028>;
#clock-cells = <1>;
clocks = <&clk25m>;
clock-names = "ref_clk";
};
...

131
Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
View File

@ -1,131 +0,0 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Baikal-T1 Clock Control Unit PLL
maintainers:
- Serge Semin <fancer.lancer@gmail.com>
description: |
Clocks Control Unit is the core of Baikal-T1 SoC System Controller
responsible for the chip subsystems clocking and resetting. The CCU is
connected with an external fixed rate oscillator, which signal is transformed
into clocks of various frequencies and then propagated to either individual
IP-blocks or to groups of blocks (clock domains). The transformation is done
by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
It's logically divided into the next components:
1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
in general can provide any frequency supported by the CCU PLLs).
2) PLLs clocks generators (PLLs) - described in this binding file.
3) AXI-bus clock dividers (AXI).
4) System devices reference clock dividers (SYS).
which are connected with each other as shown on the next figure:
+---------------+
| Baikal-T1 CCU |
| +----+------|- MIPS P5600 cores
| +-|PLLs|------|- DDR controller
| | +----+ |
+----+ | | | | |
|XTAL|--|-+ | | +---+-|
+----+ | | | +-|AXI|-|- AXI-bus
| | | +---+-|
| | | |
| | +----+---+-|- APB-bus
| +-------|SYS|-|- Low-speed Devices
| +---+-|- High-speed Devices
+---------------+
Each CCU sub-block is represented as a separate dts-node and has an
individual driver to be bound with.
In order to create signals of wide range frequencies the external oscillator
output is primarily connected to a set of CCU PLLs. There are five PLLs
to create a clock for the MIPS P5600 cores, the embedded DDR controller,
SATA, Ethernet and PCIe domains. The last three domains though named by the
biggest system interfaces in fact include nearly all of the rest SoC
peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
with an interface wrapper (so called safe PLL' clocks switcher) to simplify
the PLL configuration procedure. The PLLs work as depicted on the next
diagram:
+--------------------------+
| |
+-->+---+ +---+ +---+ | +---+ 0|\
CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+---+ +->+---+ +---+ /->+---+ | |--->CLKOUT
CLKOD---------C----------------+ 1| |
+--------C--------------------------->|/
| | ^
Rclk-+->+---+ | |
CLKR--->|/NR|-+ |
+---+ |
BYPASS--------------------------------------+
BWADJ--->
where Rclk is the reference clock coming from XTAL, NR - reference clock
divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
the binding supports the PLL dividers configuration in accordance with a
requested rate, while bypassing and bandwidth adjustment settings can be
added in future if it gets to be necessary.
The PLLs CLKOUT is then either directly connected with the corresponding
clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
divider to create a signal required for the clock domain.
The CCU PLL dts-node uses the common clock bindings with no custom
parameters. The list of exported clocks can be found in
'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
Baikal-T1 SoC System Controller its DT node is supposed to be a child of
later one.
properties:
compatible:
const: baikal,bt1-ccu-pll
reg:
maxItems: 1
"#clock-cells":
const: 1
clocks:
description: External reference clock
maxItems: 1
clock-names:
const: ref_clk
additionalProperties: false
required:
- compatible
- "#clock-cells"
- clocks
- clock-names
examples:
# Clock Control Unit PLL node:
- |
clock-controller@1f04d000 {
compatible = "baikal,bt1-ccu-pll";
reg = <0x1f04d000 0x028>;
#clock-cells = <1>;
clocks = <&clk25m>;
clock-names = "ref_clk";
};
# Required external oscillator:
- |
clk25m: clock-oscillator-25m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
clock-output-names = "clk25m";
};
...

1
drivers/clk/Kconfig
View File

@ -502,7 +502,6 @@ config COMMON_CLK_RPMI
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/aspeed/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"

1
drivers/clk/Makefile
View File

@ -116,7 +116,6 @@ obj-y += aspeed/
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_ARTPEC) += axis/
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
obj-$(CONFIG_CLK_BAIKAL_T1) += baikal-t1/
obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_DAVINCI) += davinci/

52
drivers/clk/baikal-t1/Kconfig
View File

@ -1,52 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
config CLK_BAIKAL_T1
bool "Baikal-T1 Clocks Control Unit interface"
depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
default MIPS_BAIKAL_T1
help
Clocks Control Unit is the core of Baikal-T1 SoC System Controller
responsible for the chip subsystems clocking and resetting. It
consists of multiple global clock domains, which can be reset by
means of the CCU control registers. These domains and devices placed
in them are fed with clocks generated by a hierarchy of PLLs,
configurable and fixed clock dividers. Enable this option to be able
to select Baikal-T1 CCU PLLs and Dividers drivers.
if CLK_BAIKAL_T1
config CLK_BT1_CCU_PLL
bool "Baikal-T1 CCU PLLs support"
select MFD_SYSCON
default MIPS_BAIKAL_T1
help
Enable this to support the PLLs embedded into the Baikal-T1 SoC
System Controller. These are five PLLs placed at the root of the
clocks hierarchy, right after an external reference oscillator
(normally of 25MHz). They are used to generate high frequency
signals, which are either directly wired to the consumers (like
CPUs, DDR, etc.) or passed over the clock dividers to be only
then used as an individual reference clock of a target device.
config CLK_BT1_CCU_DIV
bool "Baikal-T1 CCU Dividers support"
select MFD_SYSCON
default MIPS_BAIKAL_T1
help
Enable this to support the CCU dividers used to distribute clocks
between AXI-bus and system devices coming from CCU PLLs of Baikal-T1
SoC. CCU dividers can be either configurable or with fixed divider,
either gateable or ungateable. Some of the CCU dividers can be as well
used to reset the domains they're supplying clock to.
config CLK_BT1_CCU_RST
bool "Baikal-T1 CCU Resets support"
select RESET_CONTROLLER
select MFD_SYSCON
default MIPS_BAIKAL_T1
help
Enable this to support the CCU reset blocks responsible for the
AXI-bus and some subsystems reset. These are mainly the
self-deasserted reset controls but there are several lines which
can be directly asserted/de-asserted (PCIe and DDR sub-domains).
endif

4
drivers/clk/baikal-t1/Makefile
View File

@ -1,4 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CLK_BT1_CCU_PLL) += ccu-pll.o clk-ccu-pll.o
obj-$(CONFIG_CLK_BT1_CCU_DIV) += ccu-div.o clk-ccu-div.o
obj-$(CONFIG_CLK_BT1_CCU_RST) += ccu-rst.o

653
drivers/clk/baikal-t1/ccu-div.c
View File

@ -1,653 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Authors:
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
* Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
*
* Baikal-T1 CCU Dividers interface driver
*/
#define pr_fmt(fmt) "bt1-ccu-div: " fmt
#include <linux/kernel.h>
#include <linux/printk.h>
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/time64.h>
#include <linux/debugfs.h>
#include "ccu-div.h"
#define CCU_DIV_CTL 0x00
#define CCU_DIV_CTL_EN BIT(0)
#define CCU_DIV_CTL_RST BIT(1)
#define CCU_DIV_CTL_SET_CLKDIV BIT(2)
#define CCU_DIV_CTL_CLKDIV_FLD 4
#define CCU_DIV_CTL_CLKDIV_MASK(_width) \
GENMASK((_width) + CCU_DIV_CTL_CLKDIV_FLD - 1, CCU_DIV_CTL_CLKDIV_FLD)
#define CCU_DIV_CTL_LOCK_SHIFTED BIT(27)
#define CCU_DIV_CTL_GATE_REF_BUF BIT(28)
#define CCU_DIV_CTL_LOCK_NORMAL BIT(31)
#define CCU_DIV_LOCK_CHECK_RETRIES 50
#define CCU_DIV_CLKDIV_MIN 0
#define CCU_DIV_CLKDIV_MAX(_mask) \
((_mask) >> CCU_DIV_CTL_CLKDIV_FLD)
/*
* Use the next two methods until there are generic field setter and
* getter available with non-constant mask support.
*/
static inline u32 ccu_div_get(u32 mask, u32 val)
{
return (val & mask) >> CCU_DIV_CTL_CLKDIV_FLD;
}
static inline u32 ccu_div_prep(u32 mask, u32 val)
{
return (val << CCU_DIV_CTL_CLKDIV_FLD) & mask;
}
static inline unsigned long ccu_div_lock_delay_ns(unsigned long ref_clk,
unsigned long div)
{
u64 ns = 4ULL * (div ?: 1) * NSEC_PER_SEC;
do_div(ns, ref_clk);
return ns;
}
static inline unsigned long ccu_div_calc_freq(unsigned long ref_clk,
unsigned long div)
{
return ref_clk / (div ?: 1);
}
static int ccu_div_var_update_clkdiv(struct ccu_div *div,
unsigned long parent_rate,
unsigned long divider)
{
unsigned long nd;
u32 val = 0;
u32 lock;
int count;
nd = ccu_div_lock_delay_ns(parent_rate, divider);
if (div->features & CCU_DIV_LOCK_SHIFTED)
lock = CCU_DIV_CTL_LOCK_SHIFTED;
else
lock = CCU_DIV_CTL_LOCK_NORMAL;
regmap_update_bits(div->sys_regs, div->reg_ctl,
CCU_DIV_CTL_SET_CLKDIV, CCU_DIV_CTL_SET_CLKDIV);
/*
* Until there is nsec-version of readl_poll_timeout() is available
* we have to implement the next polling loop.
*/
count = CCU_DIV_LOCK_CHECK_RETRIES;
do {
ndelay(nd);
regmap_read(div->sys_regs, div->reg_ctl, &val);
if (val & lock)
return 0;
} while (--count);
return -ETIMEDOUT;
}
static int ccu_div_var_enable(struct clk_hw *hw)
{
struct clk_hw *parent_hw = clk_hw_get_parent(hw);
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags;
u32 val = 0;
int ret;
if (!parent_hw) {
pr_err("Can't enable '%s' with no parent", clk_hw_get_name(hw));
return -EINVAL;
}
regmap_read(div->sys_regs, div->reg_ctl, &val);
if (val & CCU_DIV_CTL_EN)
return 0;
spin_lock_irqsave(&div->lock, flags);
ret = ccu_div_var_update_clkdiv(div, clk_hw_get_rate(parent_hw),
ccu_div_get(div->mask, val));
if (!ret)
regmap_update_bits(div->sys_regs, div->reg_ctl,
CCU_DIV_CTL_EN, CCU_DIV_CTL_EN);
spin_unlock_irqrestore(&div->lock, flags);
if (ret)
pr_err("Divider '%s' lock timed out\n", clk_hw_get_name(hw));
return ret;
}
static int ccu_div_gate_enable(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags;
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl,
CCU_DIV_CTL_EN, CCU_DIV_CTL_EN);
spin_unlock_irqrestore(&div->lock, flags);
return 0;
}
static void ccu_div_gate_disable(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags;
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl, CCU_DIV_CTL_EN, 0);
spin_unlock_irqrestore(&div->lock, flags);
}
static int ccu_div_gate_is_enabled(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
u32 val = 0;
regmap_read(div->sys_regs, div->reg_ctl, &val);
return !!(val & CCU_DIV_CTL_EN);
}
static int ccu_div_buf_enable(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags;
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl,
CCU_DIV_CTL_GATE_REF_BUF, 0);
spin_unlock_irqrestore(&div->lock, flags);
return 0;
}
static void ccu_div_buf_disable(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags;
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl,
CCU_DIV_CTL_GATE_REF_BUF, CCU_DIV_CTL_GATE_REF_BUF);
spin_unlock_irqrestore(&div->lock, flags);
}
static int ccu_div_buf_is_enabled(struct clk_hw *hw)
{
struct ccu_div *div = to_ccu_div(hw);
u32 val = 0;
regmap_read(div->sys_regs, div->reg_ctl, &val);
return !(val & CCU_DIV_CTL_GATE_REF_BUF);
}
static unsigned long ccu_div_var_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long divider;
u32 val = 0;
regmap_read(div->sys_regs, div->reg_ctl, &val);
divider = ccu_div_get(div->mask, val);
return ccu_div_calc_freq(parent_rate, divider);
}
static inline unsigned long ccu_div_var_calc_divider(unsigned long rate,
unsigned long parent_rate,
unsigned int mask)
{
unsigned long divider;
divider = parent_rate / rate;
return clamp_t(unsigned long, divider, CCU_DIV_CLKDIV_MIN,
CCU_DIV_CLKDIV_MAX(mask));
}
static int ccu_div_var_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long divider;
divider = ccu_div_var_calc_divider(req->rate, req->best_parent_rate,
div->mask);
req->rate = ccu_div_calc_freq(req->best_parent_rate, divider);
return 0;
}
/*
* This method is used for the clock divider blocks, which support the
* on-the-fly rate change. So due to lacking the EN bit functionality
* they can't be gated before the rate adjustment.
*/
static int ccu_div_var_set_rate_slow(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags, divider;
u32 val;
int ret;
divider = ccu_div_var_calc_divider(rate, parent_rate, div->mask);
if (divider == 1 && div->features & CCU_DIV_SKIP_ONE) {
divider = 0;
} else if (div->features & CCU_DIV_SKIP_ONE_TO_THREE) {
if (divider == 1 || divider == 2)
divider = 0;
else if (divider == 3)
divider = 4;
}
val = ccu_div_prep(div->mask, divider);
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl, div->mask, val);
ret = ccu_div_var_update_clkdiv(div, parent_rate, divider);
spin_unlock_irqrestore(&div->lock, flags);
if (ret)
pr_err("Divider '%s' lock timed out\n", clk_hw_get_name(hw));
return ret;
}
/*
* This method is used for the clock divider blocks, which don't support
* the on-the-fly rate change.
*/
static int ccu_div_var_set_rate_fast(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_div *div = to_ccu_div(hw);
unsigned long flags, divider;
u32 val;
divider = ccu_div_var_calc_divider(rate, parent_rate, div->mask);
val = ccu_div_prep(div->mask, divider);
/*
* Also disable the clock divider block if it was enabled by default
* or by the bootloader.
*/
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl,
div->mask | CCU_DIV_CTL_EN, val);
spin_unlock_irqrestore(&div->lock, flags);
return 0;
}
static unsigned long ccu_div_fixed_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_div *div = to_ccu_div(hw);
return ccu_div_calc_freq(parent_rate, div->divider);
}
static int ccu_div_fixed_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct ccu_div *div = to_ccu_div(hw);
req->rate = ccu_div_calc_freq(req->best_parent_rate, div->divider);
return 0;
}
static int ccu_div_fixed_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
return 0;
}
#ifdef CONFIG_DEBUG_FS
struct ccu_div_dbgfs_bit {
struct ccu_div *div;
const char *name;
u32 mask;
};
#define CCU_DIV_DBGFS_BIT_ATTR(_name, _mask) { \
.name = _name, \
.mask = _mask \
}
static const struct ccu_div_dbgfs_bit ccu_div_bits[] = {
CCU_DIV_DBGFS_BIT_ATTR("div_en", CCU_DIV_CTL_EN),
CCU_DIV_DBGFS_BIT_ATTR("div_rst", CCU_DIV_CTL_RST),
CCU_DIV_DBGFS_BIT_ATTR("div_bypass", CCU_DIV_CTL_SET_CLKDIV),
CCU_DIV_DBGFS_BIT_ATTR("div_buf", CCU_DIV_CTL_GATE_REF_BUF),
CCU_DIV_DBGFS_BIT_ATTR("div_lock", CCU_DIV_CTL_LOCK_NORMAL)
};
#define CCU_DIV_DBGFS_BIT_NUM ARRAY_SIZE(ccu_div_bits)
/*
* It can be dangerous to change the Divider settings behind clock framework
* back, therefore we don't provide any kernel config based compile time option
* for this feature to enable.
*/
#undef CCU_DIV_ALLOW_WRITE_DEBUGFS
#ifdef CCU_DIV_ALLOW_WRITE_DEBUGFS
static int ccu_div_dbgfs_bit_set(void *priv, u64 val)
{
const struct ccu_div_dbgfs_bit *bit = priv;
struct ccu_div *div = bit->div;
unsigned long flags;
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl,
bit->mask, val ? bit->mask : 0);
spin_unlock_irqrestore(&div->lock, flags);
return 0;
}
static int ccu_div_dbgfs_var_clkdiv_set(void *priv, u64 val)
{
struct ccu_div *div = priv;
unsigned long flags;
u32 data;
val = clamp_t(u64, val, CCU_DIV_CLKDIV_MIN,
CCU_DIV_CLKDIV_MAX(div->mask));
data = ccu_div_prep(div->mask, val);
spin_lock_irqsave(&div->lock, flags);
regmap_update_bits(div->sys_regs, div->reg_ctl, div->mask, data);
spin_unlock_irqrestore(&div->lock, flags);
return 0;
}
#define ccu_div_dbgfs_mode 0644
#else /* !CCU_DIV_ALLOW_WRITE_DEBUGFS */
#define ccu_div_dbgfs_bit_set NULL
#define ccu_div_dbgfs_var_clkdiv_set NULL
#define ccu_div_dbgfs_mode 0444
#endif /* !CCU_DIV_ALLOW_WRITE_DEBUGFS */
static int ccu_div_dbgfs_bit_get(void *priv, u64 *val)
{
const struct ccu_div_dbgfs_bit *bit = priv;
struct ccu_div *div = bit->div;
u32 data = 0;
regmap_read(div->sys_regs, div->reg_ctl, &data);
*val = !!(data & bit->mask);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(ccu_div_dbgfs_bit_fops,
ccu_div_dbgfs_bit_get, ccu_div_dbgfs_bit_set, "%llu\n");
static int ccu_div_dbgfs_var_clkdiv_get(void *priv, u64 *val)
{
struct ccu_div *div = priv;
u32 data = 0;
regmap_read(div->sys_regs, div->reg_ctl, &data);
*val = ccu_div_get(div->mask, data);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(ccu_div_dbgfs_var_clkdiv_fops,
ccu_div_dbgfs_var_clkdiv_get, ccu_div_dbgfs_var_clkdiv_set, "%llu\n");
static int ccu_div_dbgfs_fixed_clkdiv_get(void *priv, u64 *val)
{
struct ccu_div *div = priv;
*val = div->divider;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(ccu_div_dbgfs_fixed_clkdiv_fops,
ccu_div_dbgfs_fixed_clkdiv_get, NULL, "%llu\n");
static void ccu_div_var_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct ccu_div *div = to_ccu_div(hw);
struct ccu_div_dbgfs_bit *bits;
int didx, bidx, num = 2;
const char *name;
num += !!(div->flags & CLK_SET_RATE_GATE) +
!!(div->features & CCU_DIV_RESET_DOMAIN);
bits = kzalloc_objs(*bits, num);
if (!bits)
return;
for (didx = 0, bidx = 0; bidx < CCU_DIV_DBGFS_BIT_NUM; ++bidx) {
name = ccu_div_bits[bidx].name;
if (!(div->flags & CLK_SET_RATE_GATE) &&
!strcmp("div_en", name)) {
continue;
}
if (!(div->features & CCU_DIV_RESET_DOMAIN) &&
!strcmp("div_rst", name)) {
continue;
}
if (!strcmp("div_buf", name))
continue;
bits[didx] = ccu_div_bits[bidx];
bits[didx].div = div;
if (div->features & CCU_DIV_LOCK_SHIFTED &&
!strcmp("div_lock", name)) {
bits[didx].mask = CCU_DIV_CTL_LOCK_SHIFTED;
}
debugfs_create_file_unsafe(bits[didx].name, ccu_div_dbgfs_mode,
dentry, &bits[didx],
&ccu_div_dbgfs_bit_fops);
++didx;
}
debugfs_create_file_unsafe("div_clkdiv", ccu_div_dbgfs_mode, dentry,
div, &ccu_div_dbgfs_var_clkdiv_fops);
}
static void ccu_div_gate_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct ccu_div *div = to_ccu_div(hw);
struct ccu_div_dbgfs_bit *bit;
bit = kmalloc_obj(*bit);
if (!bit)
return;
*bit = ccu_div_bits[0];
bit->div = div;
debugfs_create_file_unsafe(bit->name, ccu_div_dbgfs_mode, dentry, bit,
&ccu_div_dbgfs_bit_fops);
debugfs_create_file_unsafe("div_clkdiv", 0400, dentry, div,
&ccu_div_dbgfs_fixed_clkdiv_fops);
}
static void ccu_div_buf_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct ccu_div *div = to_ccu_div(hw);
struct ccu_div_dbgfs_bit *bit;
bit = kmalloc_obj(*bit);
if (!bit)
return;
*bit = ccu_div_bits[3];
bit->div = div;
debugfs_create_file_unsafe(bit->name, ccu_div_dbgfs_mode, dentry, bit,
&ccu_div_dbgfs_bit_fops);
}
static void ccu_div_fixed_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct ccu_div *div = to_ccu_div(hw);
debugfs_create_file_unsafe("div_clkdiv", 0400, dentry, div,
&ccu_div_dbgfs_fixed_clkdiv_fops);
}
#else /* !CONFIG_DEBUG_FS */
#define ccu_div_var_debug_init NULL
#define ccu_div_gate_debug_init NULL
#define ccu_div_buf_debug_init NULL
#define ccu_div_fixed_debug_init NULL
#endif /* !CONFIG_DEBUG_FS */
static const struct clk_ops ccu_div_var_gate_to_set_ops = {
.enable = ccu_div_var_enable,
.disable = ccu_div_gate_disable,
.is_enabled = ccu_div_gate_is_enabled,
.recalc_rate = ccu_div_var_recalc_rate,
.determine_rate = ccu_div_var_determine_rate,
.set_rate = ccu_div_var_set_rate_fast,
.debug_init = ccu_div_var_debug_init
};
static const struct clk_ops ccu_div_var_nogate_ops = {
.recalc_rate = ccu_div_var_recalc_rate,
.determine_rate = ccu_div_var_determine_rate,
.set_rate = ccu_div_var_set_rate_slow,
.debug_init = ccu_div_var_debug_init
};
static const struct clk_ops ccu_div_gate_ops = {
.enable = ccu_div_gate_enable,
.disable = ccu_div_gate_disable,
.is_enabled = ccu_div_gate_is_enabled,
.recalc_rate = ccu_div_fixed_recalc_rate,
.determine_rate = ccu_div_fixed_determine_rate,
.set_rate = ccu_div_fixed_set_rate,
.debug_init = ccu_div_gate_debug_init
};
static const struct clk_ops ccu_div_buf_ops = {
.enable = ccu_div_buf_enable,
.disable = ccu_div_buf_disable,
.is_enabled = ccu_div_buf_is_enabled,
.debug_init = ccu_div_buf_debug_init
};
static const struct clk_ops ccu_div_fixed_ops = {
.recalc_rate = ccu_div_fixed_recalc_rate,
.determine_rate = ccu_div_fixed_determine_rate,
.set_rate = ccu_div_fixed_set_rate,
.debug_init = ccu_div_fixed_debug_init
};
struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *div_init)
{
struct clk_parent_data parent_data = { };
struct clk_init_data hw_init = { };
struct ccu_div *div;
int ret;
if (!div_init)
return ERR_PTR(-EINVAL);
div = kzalloc_obj(*div);
if (!div)
return ERR_PTR(-ENOMEM);
/*
* Note since Baikal-T1 System Controller registers are MMIO-backed
* we won't check the regmap IO operations return status, because it
* must be zero anyway.
*/
div->hw.init = &hw_init;
div->id = div_init->id;
div->reg_ctl = div_init->base + CCU_DIV_CTL;
div->sys_regs = div_init->sys_regs;
div->flags = div_init->flags;
div->features = div_init->features;
spin_lock_init(&div->lock);
hw_init.name = div_init->name;
hw_init.flags = div_init->flags;
if (div_init->type == CCU_DIV_VAR) {
if (hw_init.flags & CLK_SET_RATE_GATE)
hw_init.ops = &ccu_div_var_gate_to_set_ops;
else
hw_init.ops = &ccu_div_var_nogate_ops;
div->mask = CCU_DIV_CTL_CLKDIV_MASK(div_init->width);
} else if (div_init->type == CCU_DIV_GATE) {
hw_init.ops = &ccu_div_gate_ops;
div->divider = div_init->divider;
} else if (div_init->type == CCU_DIV_BUF) {
hw_init.ops = &ccu_div_buf_ops;
} else if (div_init->type == CCU_DIV_FIXED) {
hw_init.ops = &ccu_div_fixed_ops;
div->divider = div_init->divider;
} else {
ret = -EINVAL;
goto err_free_div;
}
if (!div_init->parent_name) {
ret = -EINVAL;
goto err_free_div;
}
parent_data.fw_name = div_init->parent_name;
parent_data.name = div_init->parent_name;
hw_init.parent_data = &parent_data;
hw_init.num_parents = 1;
ret = of_clk_hw_register(div_init->np, &div->hw);
if (ret)
goto err_free_div;
return div;
err_free_div:
kfree(div);
return ERR_PTR(ret);
}
void ccu_div_hw_unregister(struct ccu_div *div)
{
clk_hw_unregister(&div->hw);
kfree(div);
}

121
drivers/clk/baikal-t1/ccu-div.h
View File

@ -1,121 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Baikal-T1 CCU Dividers interface driver
*/
#ifndef __CLK_BT1_CCU_DIV_H__
#define __CLK_BT1_CCU_DIV_H__
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/regmap.h>
#include <linux/bits.h>
#include <linux/of.h>
/*
* CCU Divider private clock IDs
* @CCU_SYS_SATA_CLK: CCU SATA internal clock
* @CCU_SYS_XGMAC_CLK: CCU XGMAC internal clock
*/
#define CCU_SYS_SATA_CLK -1
#define CCU_SYS_XGMAC_CLK -2
/*
* CCU Divider private flags
* @CCU_DIV_BASIC: Basic divider clock required by the kernel as early as
* possible.
* @CCU_DIV_SKIP_ONE: Due to some reason divider can't be set to 1.
* It can be 0 though, which is functionally the same.
* @CCU_DIV_SKIP_ONE_TO_THREE: For some reason divider can't be within [1,3].
* It can be either 0 or greater than 3.
* @CCU_DIV_LOCK_SHIFTED: Find lock-bit at non-standard position.
* @CCU_DIV_RESET_DOMAIN: There is a clock domain reset handle.
*/
#define CCU_DIV_BASIC BIT(0)
#define CCU_DIV_SKIP_ONE BIT(1)
#define CCU_DIV_SKIP_ONE_TO_THREE BIT(2)
#define CCU_DIV_LOCK_SHIFTED BIT(3)
#define CCU_DIV_RESET_DOMAIN BIT(4)
/*
* enum ccu_div_type - CCU Divider types
* @CCU_DIV_VAR: Clocks gate with variable divider.
* @CCU_DIV_GATE: Clocks gate with fixed divider.
* @CCU_DIV_BUF: Clock gate with no divider.
* @CCU_DIV_FIXED: Ungateable clock with fixed divider.
*/
enum ccu_div_type {
CCU_DIV_VAR,
CCU_DIV_GATE,
CCU_DIV_BUF,
CCU_DIV_FIXED
};
/*
* struct ccu_div_init_data - CCU Divider initialization data
* @id: Clocks private identifier.
* @name: Clocks name.
* @parent_name: Parent clocks name in a fw node.
* @base: Divider register base address with respect to the sys_regs base.
* @sys_regs: Baikal-T1 System Controller registers map.
* @np: Pointer to the node describing the CCU Dividers.
* @type: CCU divider type (variable, fixed with and without gate).
* @width: Divider width if it's variable.
* @divider: Divider fixed value.
* @flags: CCU Divider clock flags.
* @features: CCU Divider private features.
*/
struct ccu_div_init_data {
unsigned int id;
const char *name;
const char *parent_name;
unsigned int base;
struct regmap *sys_regs;
struct device_node *np;
enum ccu_div_type type;
union {
unsigned int width;
unsigned int divider;
};
unsigned long flags;
unsigned long features;
};
/*
* struct ccu_div - CCU Divider descriptor
* @hw: clk_hw of the divider.
* @id: Clock private identifier.
* @reg_ctl: Divider control register base address.
* @sys_regs: Baikal-T1 System Controller registers map.
* @lock: Divider state change spin-lock.
* @mask: Divider field mask.
* @divider: Divider fixed value.
* @flags: Divider clock flags.
* @features: CCU Divider private features.
*/
struct ccu_div {
struct clk_hw hw;
unsigned int id;
unsigned int reg_ctl;
struct regmap *sys_regs;
spinlock_t lock;
union {
u32 mask;
unsigned int divider;
};
unsigned long flags;
unsigned long features;
};
#define to_ccu_div(_hw) container_of(_hw, struct ccu_div, hw)
static inline struct clk_hw *ccu_div_get_clk_hw(struct ccu_div *div)
{
return div ? &div->hw : NULL;
}
struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *init);
void ccu_div_hw_unregister(struct ccu_div *div);
#endif /* __CLK_BT1_CCU_DIV_H__ */

560
drivers/clk/baikal-t1/ccu-pll.c
View File

@ -1,560 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Authors:
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
* Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
*
* Baikal-T1 CCU PLL interface driver
*/
#define pr_fmt(fmt) "bt1-ccu-pll: " fmt
#include <linux/kernel.h>
#include <linux/printk.h>
#include <linux/limits.h>
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/regmap.h>
#include <linux/iopoll.h>
#include <linux/time64.h>
#include <linux/rational.h>
#include <linux/debugfs.h>
#include "ccu-pll.h"
#define CCU_PLL_CTL 0x000
#define CCU_PLL_CTL_EN BIT(0)
#define CCU_PLL_CTL_RST BIT(1)
#define CCU_PLL_CTL_CLKR_FLD 2
#define CCU_PLL_CTL_CLKR_MASK GENMASK(7, CCU_PLL_CTL_CLKR_FLD)
#define CCU_PLL_CTL_CLKF_FLD 8
#define CCU_PLL_CTL_CLKF_MASK GENMASK(20, CCU_PLL_CTL_CLKF_FLD)
#define CCU_PLL_CTL_CLKOD_FLD 21
#define CCU_PLL_CTL_CLKOD_MASK GENMASK(24, CCU_PLL_CTL_CLKOD_FLD)
#define CCU_PLL_CTL_BYPASS BIT(30)
#define CCU_PLL_CTL_LOCK BIT(31)
#define CCU_PLL_CTL1 0x004
#define CCU_PLL_CTL1_BWADJ_FLD 3
#define CCU_PLL_CTL1_BWADJ_MASK GENMASK(14, CCU_PLL_CTL1_BWADJ_FLD)
#define CCU_PLL_LOCK_CHECK_RETRIES 50
#define CCU_PLL_NR_MAX \
((CCU_PLL_CTL_CLKR_MASK >> CCU_PLL_CTL_CLKR_FLD) + 1)
#define CCU_PLL_NF_MAX \
((CCU_PLL_CTL_CLKF_MASK >> (CCU_PLL_CTL_CLKF_FLD + 1)) + 1)
#define CCU_PLL_OD_MAX \
((CCU_PLL_CTL_CLKOD_MASK >> CCU_PLL_CTL_CLKOD_FLD) + 1)
#define CCU_PLL_NB_MAX \
((CCU_PLL_CTL1_BWADJ_MASK >> CCU_PLL_CTL1_BWADJ_FLD) + 1)
#define CCU_PLL_FDIV_MIN 427000UL
#define CCU_PLL_FDIV_MAX 3500000000UL
#define CCU_PLL_FOUT_MIN 200000000UL
#define CCU_PLL_FOUT_MAX 2500000000UL
#define CCU_PLL_FVCO_MIN 700000000UL
#define CCU_PLL_FVCO_MAX 3500000000UL
#define CCU_PLL_CLKOD_FACTOR 2
static inline unsigned long ccu_pll_lock_delay_us(unsigned long ref_clk,
unsigned long nr)
{
u64 us = 500ULL * nr * USEC_PER_SEC;
do_div(us, ref_clk);
return us;
}
static inline unsigned long ccu_pll_calc_freq(unsigned long ref_clk,
unsigned long nr,
unsigned long nf,
unsigned long od)
{
u64 tmp = ref_clk;
do_div(tmp, nr);
tmp *= nf;
do_div(tmp, od);
return tmp;
}
static int ccu_pll_reset(struct ccu_pll *pll, unsigned long ref_clk,
unsigned long nr)
{
unsigned long ud, ut;
u32 val;
ud = ccu_pll_lock_delay_us(ref_clk, nr);
ut = ud * CCU_PLL_LOCK_CHECK_RETRIES;
regmap_update_bits(pll->sys_regs, pll->reg_ctl,
CCU_PLL_CTL_RST, CCU_PLL_CTL_RST);
return regmap_read_poll_timeout_atomic(pll->sys_regs, pll->reg_ctl, val,
val & CCU_PLL_CTL_LOCK, ud, ut);
}
static int ccu_pll_enable(struct clk_hw *hw)
{
struct clk_hw *parent_hw = clk_hw_get_parent(hw);
struct ccu_pll *pll = to_ccu_pll(hw);
unsigned long flags;
u32 val = 0;
int ret;
if (!parent_hw) {
pr_err("Can't enable '%s' with no parent", clk_hw_get_name(hw));
return -EINVAL;
}
regmap_read(pll->sys_regs, pll->reg_ctl, &val);
if (val & CCU_PLL_CTL_EN)
return 0;
spin_lock_irqsave(&pll->lock, flags);
regmap_write(pll->sys_regs, pll->reg_ctl, val | CCU_PLL_CTL_EN);
ret = ccu_pll_reset(pll, clk_hw_get_rate(parent_hw),
FIELD_GET(CCU_PLL_CTL_CLKR_MASK, val) + 1);
spin_unlock_irqrestore(&pll->lock, flags);
if (ret)
pr_err("PLL '%s' reset timed out\n", clk_hw_get_name(hw));
return ret;
}
static void ccu_pll_disable(struct clk_hw *hw)
{
struct ccu_pll *pll = to_ccu_pll(hw);
unsigned long flags;
spin_lock_irqsave(&pll->lock, flags);
regmap_update_bits(pll->sys_regs, pll->reg_ctl, CCU_PLL_CTL_EN, 0);
spin_unlock_irqrestore(&pll->lock, flags);
}
static int ccu_pll_is_enabled(struct clk_hw *hw)
{
struct ccu_pll *pll = to_ccu_pll(hw);
u32 val = 0;
regmap_read(pll->sys_regs, pll->reg_ctl, &val);
return !!(val & CCU_PLL_CTL_EN);
}
static unsigned long ccu_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_pll *pll = to_ccu_pll(hw);
unsigned long nr, nf, od;
u32 val = 0;
regmap_read(pll->sys_regs, pll->reg_ctl, &val);
nr = FIELD_GET(CCU_PLL_CTL_CLKR_MASK, val) + 1;
nf = FIELD_GET(CCU_PLL_CTL_CLKF_MASK, val) + 1;
od = FIELD_GET(CCU_PLL_CTL_CLKOD_MASK, val) + 1;
return ccu_pll_calc_freq(parent_rate, nr, nf, od);
}
static void ccu_pll_calc_factors(unsigned long rate, unsigned long parent_rate,
unsigned long *nr, unsigned long *nf,
unsigned long *od)
{
unsigned long err, freq, min_err = ULONG_MAX;
unsigned long num, denom, n1, d1, nri;
unsigned long nr_max, nf_max, od_max;
/*
* Make sure PLL is working with valid input signal (Fdiv). If
* you want to speed the function up just reduce CCU_PLL_NR_MAX.
* This will cause a worse approximation though.
*/
nri = (parent_rate / CCU_PLL_FDIV_MAX) + 1;
nr_max = min(parent_rate / CCU_PLL_FDIV_MIN, CCU_PLL_NR_MAX);
/*
* Find a closest [nr;nf;od] vector taking into account the
* limitations like: 1) 700MHz <= Fvco <= 3.5GHz, 2) PLL Od is
* either 1 or even number within the acceptable range (alas 1s
* is also excluded by the next loop).
*/
for (; nri <= nr_max; ++nri) {
/* Use Od factor to fulfill the limitation 2). */
num = CCU_PLL_CLKOD_FACTOR * rate;
denom = parent_rate / nri;
/*
* Make sure Fvco is within the acceptable range to fulfill
* the condition 1). Note due to the CCU_PLL_CLKOD_FACTOR value
* the actual upper limit is also divided by that factor.
* It's not big problem for us since practically there is no
* need in clocks with that high frequency.
*/
nf_max = min(CCU_PLL_FVCO_MAX / denom, CCU_PLL_NF_MAX);
od_max = CCU_PLL_OD_MAX / CCU_PLL_CLKOD_FACTOR;
/*
* Bypass the out-of-bound values, which can't be properly
* handled by the rational fraction approximation algorithm.
*/
if (num / denom >= nf_max) {
n1 = nf_max;
d1 = 1;
} else if (denom / num >= od_max) {
n1 = 1;
d1 = od_max;
} else {
rational_best_approximation(num, denom, nf_max, od_max,
&n1, &d1);
}
/* Select the best approximation of the target rate. */
freq = ccu_pll_calc_freq(parent_rate, nri, n1, d1);
err = abs((int64_t)freq - num);
if (err < min_err) {
min_err = err;
*nr = nri;
*nf = n1;
*od = CCU_PLL_CLKOD_FACTOR * d1;
}
}
}
static int ccu_pll_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
unsigned long nr = 1, nf = 1, od = 1;
ccu_pll_calc_factors(req->rate, req->best_parent_rate, &nr, &nf, &od);
req->rate = ccu_pll_calc_freq(req->best_parent_rate, nr, nf, od);
return 0;
}
/*
* This method is used for PLLs, which support the on-the-fly dividers
* adjustment. So there is no need in gating such clocks.
*/
static int ccu_pll_set_rate_reset(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_pll *pll = to_ccu_pll(hw);
unsigned long nr, nf, od;
unsigned long flags;
u32 mask, val;
int ret;
ccu_pll_calc_factors(rate, parent_rate, &nr, &nf, &od);
mask = CCU_PLL_CTL_CLKR_MASK | CCU_PLL_CTL_CLKF_MASK |
CCU_PLL_CTL_CLKOD_MASK;
val = FIELD_PREP(CCU_PLL_CTL_CLKR_MASK, nr - 1) |
FIELD_PREP(CCU_PLL_CTL_CLKF_MASK, nf - 1) |
FIELD_PREP(CCU_PLL_CTL_CLKOD_MASK, od - 1);
spin_lock_irqsave(&pll->lock, flags);
regmap_update_bits(pll->sys_regs, pll->reg_ctl, mask, val);
ret = ccu_pll_reset(pll, parent_rate, nr);
spin_unlock_irqrestore(&pll->lock, flags);
if (ret)
pr_err("PLL '%s' reset timed out\n", clk_hw_get_name(hw));
return ret;
}
/*
* This method is used for PLLs, which don't support the on-the-fly dividers
* adjustment. So the corresponding clocks are supposed to be gated first.
*/
static int ccu_pll_set_rate_norst(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_pll *pll = to_ccu_pll(hw);
unsigned long nr, nf, od;
unsigned long flags;
u32 mask, val;
ccu_pll_calc_factors(rate, parent_rate, &nr, &nf, &od);
/*
* Disable PLL if it was enabled by default or left enabled by the
* system bootloader.
*/
mask = CCU_PLL_CTL_CLKR_MASK | CCU_PLL_CTL_CLKF_MASK |
CCU_PLL_CTL_CLKOD_MASK | CCU_PLL_CTL_EN;
val = FIELD_PREP(CCU_PLL_CTL_CLKR_MASK, nr - 1) |
FIELD_PREP(CCU_PLL_CTL_CLKF_MASK, nf - 1) |
FIELD_PREP(CCU_PLL_CTL_CLKOD_MASK, od - 1);
spin_lock_irqsave(&pll->lock, flags);
regmap_update_bits(pll->sys_regs, pll->reg_ctl, mask, val);
spin_unlock_irqrestore(&pll->lock, flags);
return 0;
}
#ifdef CONFIG_DEBUG_FS
struct ccu_pll_dbgfs_bit {
struct ccu_pll *pll;
const char *name;
unsigned int reg;
u32 mask;
};
struct ccu_pll_dbgfs_fld {
struct ccu_pll *pll;
const char *name;
unsigned int reg;
unsigned int lsb;
u32 mask;
u32 min;
u32 max;
};
#define CCU_PLL_DBGFS_BIT_ATTR(_name, _reg, _mask) \
{ \
.name = _name, \
.reg = _reg, \
.mask = _mask \
}
#define CCU_PLL_DBGFS_FLD_ATTR(_name, _reg, _lsb, _mask, _min, _max) \
{ \
.name = _name, \
.reg = _reg, \
.lsb = _lsb, \
.mask = _mask, \
.min = _min, \
.max = _max \
}
static const struct ccu_pll_dbgfs_bit ccu_pll_bits[] = {
CCU_PLL_DBGFS_BIT_ATTR("pll_en", CCU_PLL_CTL, CCU_PLL_CTL_EN),
CCU_PLL_DBGFS_BIT_ATTR("pll_rst", CCU_PLL_CTL, CCU_PLL_CTL_RST),
CCU_PLL_DBGFS_BIT_ATTR("pll_bypass", CCU_PLL_CTL, CCU_PLL_CTL_BYPASS),
CCU_PLL_DBGFS_BIT_ATTR("pll_lock", CCU_PLL_CTL, CCU_PLL_CTL_LOCK)
};
#define CCU_PLL_DBGFS_BIT_NUM ARRAY_SIZE(ccu_pll_bits)
static const struct ccu_pll_dbgfs_fld ccu_pll_flds[] = {
CCU_PLL_DBGFS_FLD_ATTR("pll_nr", CCU_PLL_CTL, CCU_PLL_CTL_CLKR_FLD,
CCU_PLL_CTL_CLKR_MASK, 1, CCU_PLL_NR_MAX),
CCU_PLL_DBGFS_FLD_ATTR("pll_nf", CCU_PLL_CTL, CCU_PLL_CTL_CLKF_FLD,
CCU_PLL_CTL_CLKF_MASK, 1, CCU_PLL_NF_MAX),
CCU_PLL_DBGFS_FLD_ATTR("pll_od", CCU_PLL_CTL, CCU_PLL_CTL_CLKOD_FLD,
CCU_PLL_CTL_CLKOD_MASK, 1, CCU_PLL_OD_MAX),
CCU_PLL_DBGFS_FLD_ATTR("pll_nb", CCU_PLL_CTL1, CCU_PLL_CTL1_BWADJ_FLD,
CCU_PLL_CTL1_BWADJ_MASK, 1, CCU_PLL_NB_MAX)
};
#define CCU_PLL_DBGFS_FLD_NUM ARRAY_SIZE(ccu_pll_flds)
/*
* It can be dangerous to change the PLL settings behind clock framework back,
* therefore we don't provide any kernel config based compile time option for
* this feature to enable.
*/
#undef CCU_PLL_ALLOW_WRITE_DEBUGFS
#ifdef CCU_PLL_ALLOW_WRITE_DEBUGFS
static int ccu_pll_dbgfs_bit_set(void *priv, u64 val)
{
const struct ccu_pll_dbgfs_bit *bit = priv;
struct ccu_pll *pll = bit->pll;
unsigned long flags;
spin_lock_irqsave(&pll->lock, flags);
regmap_update_bits(pll->sys_regs, pll->reg_ctl + bit->reg,
bit->mask, val ? bit->mask : 0);
spin_unlock_irqrestore(&pll->lock, flags);
return 0;
}
static int ccu_pll_dbgfs_fld_set(void *priv, u64 val)
{
struct ccu_pll_dbgfs_fld *fld = priv;
struct ccu_pll *pll = fld->pll;
unsigned long flags;
u32 data;
val = clamp_t(u64, val, fld->min, fld->max);
data = ((val - 1) << fld->lsb) & fld->mask;
spin_lock_irqsave(&pll->lock, flags);
regmap_update_bits(pll->sys_regs, pll->reg_ctl + fld->reg, fld->mask,
data);
spin_unlock_irqrestore(&pll->lock, flags);
return 0;
}
#define ccu_pll_dbgfs_mode 0644
#else /* !CCU_PLL_ALLOW_WRITE_DEBUGFS */
#define ccu_pll_dbgfs_bit_set NULL
#define ccu_pll_dbgfs_fld_set NULL
#define ccu_pll_dbgfs_mode 0444
#endif /* !CCU_PLL_ALLOW_WRITE_DEBUGFS */
static int ccu_pll_dbgfs_bit_get(void *priv, u64 *val)
{
struct ccu_pll_dbgfs_bit *bit = priv;
struct ccu_pll *pll = bit->pll;
u32 data = 0;
regmap_read(pll->sys_regs, pll->reg_ctl + bit->reg, &data);
*val = !!(data & bit->mask);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(ccu_pll_dbgfs_bit_fops,
ccu_pll_dbgfs_bit_get, ccu_pll_dbgfs_bit_set, "%llu\n");
static int ccu_pll_dbgfs_fld_get(void *priv, u64 *val)
{
struct ccu_pll_dbgfs_fld *fld = priv;
struct ccu_pll *pll = fld->pll;
u32 data = 0;
regmap_read(pll->sys_regs, pll->reg_ctl + fld->reg, &data);
*val = ((data & fld->mask) >> fld->lsb) + 1;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(ccu_pll_dbgfs_fld_fops,
ccu_pll_dbgfs_fld_get, ccu_pll_dbgfs_fld_set, "%llu\n");
static void ccu_pll_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct ccu_pll *pll = to_ccu_pll(hw);
struct ccu_pll_dbgfs_bit *bits;
struct ccu_pll_dbgfs_fld *flds;
int idx;
bits = kzalloc_objs(*bits, CCU_PLL_DBGFS_BIT_NUM);
if (!bits)
return;
for (idx = 0; idx < CCU_PLL_DBGFS_BIT_NUM; ++idx) {
bits[idx] = ccu_pll_bits[idx];
bits[idx].pll = pll;
debugfs_create_file_unsafe(bits[idx].name, ccu_pll_dbgfs_mode,
dentry, &bits[idx],
&ccu_pll_dbgfs_bit_fops);
}
flds = kzalloc_objs(*flds, CCU_PLL_DBGFS_FLD_NUM);
if (!flds)
return;
for (idx = 0; idx < CCU_PLL_DBGFS_FLD_NUM; ++idx) {
flds[idx] = ccu_pll_flds[idx];
flds[idx].pll = pll;
debugfs_create_file_unsafe(flds[idx].name, ccu_pll_dbgfs_mode,
dentry, &flds[idx],
&ccu_pll_dbgfs_fld_fops);
}
}
#else /* !CONFIG_DEBUG_FS */
#define ccu_pll_debug_init NULL
#endif /* !CONFIG_DEBUG_FS */
static const struct clk_ops ccu_pll_gate_to_set_ops = {
.enable = ccu_pll_enable,
.disable = ccu_pll_disable,
.is_enabled = ccu_pll_is_enabled,
.recalc_rate = ccu_pll_recalc_rate,
.determine_rate = ccu_pll_determine_rate,
.set_rate = ccu_pll_set_rate_norst,
.debug_init = ccu_pll_debug_init
};
static const struct clk_ops ccu_pll_straight_set_ops = {
.enable = ccu_pll_enable,
.disable = ccu_pll_disable,
.is_enabled = ccu_pll_is_enabled,
.recalc_rate = ccu_pll_recalc_rate,
.determine_rate = ccu_pll_determine_rate,
.set_rate = ccu_pll_set_rate_reset,
.debug_init = ccu_pll_debug_init
};
struct ccu_pll *ccu_pll_hw_register(const struct ccu_pll_init_data *pll_init)
{
struct clk_parent_data parent_data = { };
struct clk_init_data hw_init = { };
struct ccu_pll *pll;
int ret;
if (!pll_init)
return ERR_PTR(-EINVAL);
pll = kzalloc_obj(*pll);
if (!pll)
return ERR_PTR(-ENOMEM);
/*
* Note since Baikal-T1 System Controller registers are MMIO-backed
* we won't check the regmap IO operations return status, because it
* must be zero anyway.
*/
pll->hw.init = &hw_init;
pll->reg_ctl = pll_init->base + CCU_PLL_CTL;
pll->reg_ctl1 = pll_init->base + CCU_PLL_CTL1;
pll->sys_regs = pll_init->sys_regs;
pll->id = pll_init->id;
spin_lock_init(&pll->lock);
hw_init.name = pll_init->name;
hw_init.flags = pll_init->flags;
if (hw_init.flags & CLK_SET_RATE_GATE)
hw_init.ops = &ccu_pll_gate_to_set_ops;
else
hw_init.ops = &ccu_pll_straight_set_ops;
if (!pll_init->parent_name) {
ret = -EINVAL;
goto err_free_pll;
}
parent_data.fw_name = pll_init->parent_name;
hw_init.parent_data = &parent_data;
hw_init.num_parents = 1;
ret = of_clk_hw_register(pll_init->np, &pll->hw);
if (ret)
goto err_free_pll;
return pll;
err_free_pll:
kfree(pll);
return ERR_PTR(ret);
}
void ccu_pll_hw_unregister(struct ccu_pll *pll)
{
clk_hw_unregister(&pll->hw);
kfree(pll);
}

72
drivers/clk/baikal-t1/ccu-pll.h
View File

@ -1,72 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Baikal-T1 CCU PLL interface driver
*/
#ifndef __CLK_BT1_CCU_PLL_H__
#define __CLK_BT1_CCU_PLL_H__
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/regmap.h>
#include <linux/bits.h>
#include <linux/of.h>
/*
* CCU PLL private flags
* @CCU_PLL_BASIC: Basic PLL required by the kernel as early as possible.
*/
#define CCU_PLL_BASIC BIT(0)
/*
* struct ccu_pll_init_data - CCU PLL initialization data
* @id: Clock private identifier.
* @name: Clocks name.
* @parent_name: Clocks parent name in a fw node.
* @base: PLL registers base address with respect to the sys_regs base.
* @sys_regs: Baikal-T1 System Controller registers map.
* @np: Pointer to the node describing the CCU PLLs.
* @flags: PLL clock flags.
* @features: PLL private features.
*/
struct ccu_pll_init_data {
unsigned int id;
const char *name;
const char *parent_name;
unsigned int base;
struct regmap *sys_regs;
struct device_node *np;
unsigned long flags;
unsigned long features;
};
/*
* struct ccu_pll - CCU PLL descriptor
* @hw: clk_hw of the PLL.
* @id: Clock private identifier.
* @reg_ctl: PLL control register base.
* @reg_ctl1: PLL control1 register base.
* @sys_regs: Baikal-T1 System Controller registers map.
* @lock: PLL state change spin-lock.
*/
struct ccu_pll {
struct clk_hw hw;
unsigned int id;
unsigned int reg_ctl;
unsigned int reg_ctl1;
struct regmap *sys_regs;
spinlock_t lock;
};
#define to_ccu_pll(_hw) container_of(_hw, struct ccu_pll, hw)
static inline struct clk_hw *ccu_pll_get_clk_hw(struct ccu_pll *pll)
{
return pll ? &pll->hw : NULL;
}
struct ccu_pll *ccu_pll_hw_register(const struct ccu_pll_init_data *init);
void ccu_pll_hw_unregister(struct ccu_pll *pll);
#endif /* __CLK_BT1_CCU_PLL_H__ */

217
drivers/clk/baikal-t1/ccu-rst.c
View File

@ -1,217 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2021 BAIKAL ELECTRONICS, JSC
*
* Authors:
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
*
* Baikal-T1 CCU Resets interface driver
*/
#define pr_fmt(fmt) "bt1-ccu-rst: " fmt
#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/printk.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <dt-bindings/reset/bt1-ccu.h>
#include "ccu-rst.h"
#define CCU_AXI_MAIN_BASE 0x030
#define CCU_AXI_DDR_BASE 0x034
#define CCU_AXI_SATA_BASE 0x038
#define CCU_AXI_GMAC0_BASE 0x03C
#define CCU_AXI_GMAC1_BASE 0x040
#define CCU_AXI_XGMAC_BASE 0x044
#define CCU_AXI_PCIE_M_BASE 0x048
#define CCU_AXI_PCIE_S_BASE 0x04C
#define CCU_AXI_USB_BASE 0x050
#define CCU_AXI_HWA_BASE 0x054
#define CCU_AXI_SRAM_BASE 0x058
#define CCU_SYS_DDR_BASE 0x02c
#define CCU_SYS_SATA_REF_BASE 0x060
#define CCU_SYS_APB_BASE 0x064
#define CCU_SYS_PCIE_BASE 0x144
#define CCU_RST_DELAY_US 1
#define CCU_RST_TRIG(_base, _ofs) \
{ \
.type = CCU_RST_TRIG, \
.base = _base, \
.mask = BIT(_ofs), \
}
#define CCU_RST_DIR(_base, _ofs) \
{ \
.type = CCU_RST_DIR, \
.base = _base, \
.mask = BIT(_ofs), \
}
struct ccu_rst_info {
enum ccu_rst_type type;
unsigned int base;
unsigned int mask;
};
/*
* Each AXI-bus clock divider is equipped with the corresponding clock-consumer
* domain reset (it's self-deasserted reset control).
*/
static const struct ccu_rst_info axi_rst_info[] = {
[CCU_AXI_MAIN_RST] = CCU_RST_TRIG(CCU_AXI_MAIN_BASE, 1),
[CCU_AXI_DDR_RST] = CCU_RST_TRIG(CCU_AXI_DDR_BASE, 1),
[CCU_AXI_SATA_RST] = CCU_RST_TRIG(CCU_AXI_SATA_BASE, 1),
[CCU_AXI_GMAC0_RST] = CCU_RST_TRIG(CCU_AXI_GMAC0_BASE, 1),
[CCU_AXI_GMAC1_RST] = CCU_RST_TRIG(CCU_AXI_GMAC1_BASE, 1),
[CCU_AXI_XGMAC_RST] = CCU_RST_TRIG(CCU_AXI_XGMAC_BASE, 1),
[CCU_AXI_PCIE_M_RST] = CCU_RST_TRIG(CCU_AXI_PCIE_M_BASE, 1),
[CCU_AXI_PCIE_S_RST] = CCU_RST_TRIG(CCU_AXI_PCIE_S_BASE, 1),
[CCU_AXI_USB_RST] = CCU_RST_TRIG(CCU_AXI_USB_BASE, 1),
[CCU_AXI_HWA_RST] = CCU_RST_TRIG(CCU_AXI_HWA_BASE, 1),
[CCU_AXI_SRAM_RST] = CCU_RST_TRIG(CCU_AXI_SRAM_BASE, 1),
};
/*
* SATA reference clock domain and APB-bus domain are connected with the
* sefl-deasserted reset control, which can be activated via the corresponding
* clock divider register. DDR and PCIe sub-domains can be reset with directly
* controlled reset signals. Resetting the DDR controller though won't end up
* well while the Linux kernel is working.
*/
static const struct ccu_rst_info sys_rst_info[] = {
[CCU_SYS_SATA_REF_RST] = CCU_RST_TRIG(CCU_SYS_SATA_REF_BASE, 1),
[CCU_SYS_APB_RST] = CCU_RST_TRIG(CCU_SYS_APB_BASE, 1),
[CCU_SYS_DDR_FULL_RST] = CCU_RST_DIR(CCU_SYS_DDR_BASE, 1),
[CCU_SYS_DDR_INIT_RST] = CCU_RST_DIR(CCU_SYS_DDR_BASE, 2),
[CCU_SYS_PCIE_PCS_PHY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 0),
[CCU_SYS_PCIE_PIPE0_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 4),
[CCU_SYS_PCIE_CORE_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 8),
[CCU_SYS_PCIE_PWR_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 9),
[CCU_SYS_PCIE_STICKY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 10),
[CCU_SYS_PCIE_NSTICKY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 11),
[CCU_SYS_PCIE_HOT_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 12),
};
static int ccu_rst_reset(struct reset_controller_dev *rcdev, unsigned long idx)
{
struct ccu_rst *rst = to_ccu_rst(rcdev);
const struct ccu_rst_info *info = &rst->rsts_info[idx];
if (info->type != CCU_RST_TRIG)
return -EOPNOTSUPP;
regmap_update_bits(rst->sys_regs, info->base, info->mask, info->mask);
/* The next delay must be enough to cover all the resets. */
udelay(CCU_RST_DELAY_US);
return 0;
}
static int ccu_rst_set(struct reset_controller_dev *rcdev,
unsigned long idx, bool high)
{
struct ccu_rst *rst = to_ccu_rst(rcdev);
const struct ccu_rst_info *info = &rst->rsts_info[idx];
if (info->type != CCU_RST_DIR)
return high ? -EOPNOTSUPP : 0;
return regmap_update_bits(rst->sys_regs, info->base,
info->mask, high ? info->mask : 0);
}
static int ccu_rst_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
return ccu_rst_set(rcdev, idx, true);
}
static int ccu_rst_deassert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
return ccu_rst_set(rcdev, idx, false);
}
static int ccu_rst_status(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct ccu_rst *rst = to_ccu_rst(rcdev);
const struct ccu_rst_info *info = &rst->rsts_info[idx];
u32 val;
if (info->type != CCU_RST_DIR)
return -EOPNOTSUPP;
regmap_read(rst->sys_regs, info->base, &val);
return !!(val & info->mask);
}
static const struct reset_control_ops ccu_rst_ops = {
.reset = ccu_rst_reset,
.assert = ccu_rst_assert,
.deassert = ccu_rst_deassert,
.status = ccu_rst_status,
};
struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *rst_init)
{
struct ccu_rst *rst;
int ret;
if (!rst_init)
return ERR_PTR(-EINVAL);
rst = kzalloc_obj(*rst);
if (!rst)
return ERR_PTR(-ENOMEM);
rst->sys_regs = rst_init->sys_regs;
if (of_device_is_compatible(rst_init->np, "baikal,bt1-ccu-axi")) {
rst->rcdev.nr_resets = ARRAY_SIZE(axi_rst_info);
rst->rsts_info = axi_rst_info;
} else if (of_device_is_compatible(rst_init->np, "baikal,bt1-ccu-sys")) {
rst->rcdev.nr_resets = ARRAY_SIZE(sys_rst_info);
rst->rsts_info = sys_rst_info;
} else {
pr_err("Incompatible DT node '%s' specified\n",
of_node_full_name(rst_init->np));
ret = -EINVAL;
goto err_kfree_rst;
}
rst->rcdev.owner = THIS_MODULE;
rst->rcdev.ops = &ccu_rst_ops;
rst->rcdev.of_node = rst_init->np;
ret = reset_controller_register(&rst->rcdev);
if (ret) {
pr_err("Couldn't register '%s' reset controller\n",
of_node_full_name(rst_init->np));
goto err_kfree_rst;
}
return rst;
err_kfree_rst:
kfree(rst);
return ERR_PTR(ret);
}
void ccu_rst_hw_unregister(struct ccu_rst *rst)
{
reset_controller_unregister(&rst->rcdev);
kfree(rst);
}

67
drivers/clk/baikal-t1/ccu-rst.h
View File

@ -1,67 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2021 BAIKAL ELECTRONICS, JSC
*
* Baikal-T1 CCU Resets interface driver
*/
#ifndef __CLK_BT1_CCU_RST_H__
#define __CLK_BT1_CCU_RST_H__
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
struct ccu_rst_info;
/*
* enum ccu_rst_type - CCU Reset types
* @CCU_RST_TRIG: Self-deasserted reset signal.
* @CCU_RST_DIR: Directly controlled reset signal.
*/
enum ccu_rst_type {
CCU_RST_TRIG,
CCU_RST_DIR,
};
/*
* struct ccu_rst_init_data - CCU Resets initialization data
* @sys_regs: Baikal-T1 System Controller registers map.
* @np: Pointer to the node with the System CCU block.
*/
struct ccu_rst_init_data {
struct regmap *sys_regs;
struct device_node *np;
};
/*
* struct ccu_rst - CCU Reset descriptor
* @rcdev: Reset controller descriptor.
* @sys_regs: Baikal-T1 System Controller registers map.
* @rsts_info: Reset flag info (base address and mask).
*/
struct ccu_rst {
struct reset_controller_dev rcdev;
struct regmap *sys_regs;
const struct ccu_rst_info *rsts_info;
};
#define to_ccu_rst(_rcdev) container_of(_rcdev, struct ccu_rst, rcdev)
#ifdef CONFIG_CLK_BT1_CCU_RST
struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *init);
void ccu_rst_hw_unregister(struct ccu_rst *rst);
#else
static inline
struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *init)
{
return NULL;
}
static inline void ccu_rst_hw_unregister(struct ccu_rst *rst) {}
#endif
#endif /* __CLK_BT1_CCU_RST_H__ */

520
drivers/clk/baikal-t1/clk-ccu-div.c
View File

@ -1,520 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Authors:
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
* Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
*
* Baikal-T1 CCU Dividers clock driver
*/
#define pr_fmt(fmt) "bt1-ccu-div: " fmt
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/ioport.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/bt1-ccu.h>
#include "ccu-div.h"
#include "ccu-rst.h"
#define CCU_AXI_MAIN_BASE 0x030
#define CCU_AXI_DDR_BASE 0x034
#define CCU_AXI_SATA_BASE 0x038
#define CCU_AXI_GMAC0_BASE 0x03C
#define CCU_AXI_GMAC1_BASE 0x040
#define CCU_AXI_XGMAC_BASE 0x044
#define CCU_AXI_PCIE_M_BASE 0x048
#define CCU_AXI_PCIE_S_BASE 0x04C
#define CCU_AXI_USB_BASE 0x050
#define CCU_AXI_HWA_BASE 0x054
#define CCU_AXI_SRAM_BASE 0x058
#define CCU_SYS_SATA_REF_BASE 0x060
#define CCU_SYS_APB_BASE 0x064
#define CCU_SYS_GMAC0_BASE 0x068
#define CCU_SYS_GMAC1_BASE 0x06C
#define CCU_SYS_XGMAC_BASE 0x070
#define CCU_SYS_USB_BASE 0x074
#define CCU_SYS_PVT_BASE 0x078
#define CCU_SYS_HWA_BASE 0x07C
#define CCU_SYS_UART_BASE 0x084
#define CCU_SYS_TIMER0_BASE 0x088
#define CCU_SYS_TIMER1_BASE 0x08C
#define CCU_SYS_TIMER2_BASE 0x090
#define CCU_SYS_WDT_BASE 0x150
#define CCU_DIV_VAR_INFO(_id, _name, _pname, _base, _width, _flags, _features) \
{ \
.id = _id, \
.name = _name, \
.parent_name = _pname, \
.base = _base, \
.type = CCU_DIV_VAR, \
.width = _width, \
.flags = _flags, \
.features = _features \
}
#define CCU_DIV_GATE_INFO(_id, _name, _pname, _base, _divider) \
{ \
.id = _id, \
.name = _name, \
.parent_name = _pname, \
.base = _base, \
.type = CCU_DIV_GATE, \
.divider = _divider \
}
#define CCU_DIV_BUF_INFO(_id, _name, _pname, _base, _flags) \
{ \
.id = _id, \
.name = _name, \
.parent_name = _pname, \
.base = _base, \
.type = CCU_DIV_BUF, \
.flags = _flags \
}
#define CCU_DIV_FIXED_INFO(_id, _name, _pname, _divider) \
{ \
.id = _id, \
.name = _name, \
.parent_name = _pname, \
.type = CCU_DIV_FIXED, \
.divider = _divider \
}
struct ccu_div_info {
unsigned int id;
const char *name;
const char *parent_name;
unsigned int base;
enum ccu_div_type type;
union {
unsigned int width;
unsigned int divider;
};
unsigned long flags;
unsigned long features;
};
struct ccu_div_data {
struct device_node *np;
struct regmap *sys_regs;
unsigned int divs_num;
const struct ccu_div_info *divs_info;
struct ccu_div **divs;
struct ccu_rst *rsts;
};
/*
* AXI Main Interconnect (axi_main_clk) and DDR AXI-bus (axi_ddr_clk) clocks
* must be left enabled in any case, since former one is responsible for
* clocking a bus between CPU cores and the rest of the SoC components, while
* the later is clocking the AXI-bus between DDR controller and the Main
* Interconnect. So should any of these clocks get to be disabled, the system
* will literally stop working. That's why we marked them as critical.
*/
static const struct ccu_div_info axi_info[] = {
CCU_DIV_VAR_INFO(CCU_AXI_MAIN_CLK, "axi_main_clk", "pcie_clk",
CCU_AXI_MAIN_BASE, 4,
CLK_IS_CRITICAL, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_DDR_CLK, "axi_ddr_clk", "sata_clk",
CCU_AXI_DDR_BASE, 4,
CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_SATA_CLK, "axi_sata_clk", "sata_clk",
CCU_AXI_SATA_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_GMAC0_CLK, "axi_gmac0_clk", "eth_clk",
CCU_AXI_GMAC0_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_GMAC1_CLK, "axi_gmac1_clk", "eth_clk",
CCU_AXI_GMAC1_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_XGMAC_CLK, "axi_xgmac_clk", "eth_clk",
CCU_AXI_XGMAC_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_PCIE_M_CLK, "axi_pcie_m_clk", "pcie_clk",
CCU_AXI_PCIE_M_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_PCIE_S_CLK, "axi_pcie_s_clk", "pcie_clk",
CCU_AXI_PCIE_S_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_USB_CLK, "axi_usb_clk", "sata_clk",
CCU_AXI_USB_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_HWA_CLK, "axi_hwa_clk", "sata_clk",
CCU_AXI_HWA_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN),
CCU_DIV_VAR_INFO(CCU_AXI_SRAM_CLK, "axi_sram_clk", "eth_clk",
CCU_AXI_SRAM_BASE, 4,
CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN)
};
/*
* APB-bus clock is marked as critical since it's a main communication bus
* for the SoC devices registers IO-operations.
*/
static const struct ccu_div_info sys_info[] = {
CCU_DIV_VAR_INFO(CCU_SYS_SATA_CLK, "sys_sata_clk",
"sata_clk", CCU_SYS_SATA_REF_BASE, 4,
CLK_SET_RATE_GATE,
CCU_DIV_SKIP_ONE | CCU_DIV_LOCK_SHIFTED |
CCU_DIV_RESET_DOMAIN),
CCU_DIV_BUF_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk",
"sys_sata_clk", CCU_SYS_SATA_REF_BASE,
CLK_SET_RATE_PARENT),
CCU_DIV_VAR_INFO(CCU_SYS_APB_CLK, "sys_apb_clk",
"pcie_clk", CCU_SYS_APB_BASE, 5,
CLK_IS_CRITICAL, CCU_DIV_BASIC | CCU_DIV_RESET_DOMAIN),
CCU_DIV_GATE_INFO(CCU_SYS_GMAC0_TX_CLK, "sys_gmac0_tx_clk",
"eth_clk", CCU_SYS_GMAC0_BASE, 5),
CCU_DIV_FIXED_INFO(CCU_SYS_GMAC0_PTP_CLK, "sys_gmac0_ptp_clk",
"eth_clk", 10),
CCU_DIV_GATE_INFO(CCU_SYS_GMAC1_TX_CLK, "sys_gmac1_tx_clk",
"eth_clk", CCU_SYS_GMAC1_BASE, 5),
CCU_DIV_FIXED_INFO(CCU_SYS_GMAC1_PTP_CLK, "sys_gmac1_ptp_clk",
"eth_clk", 10),
CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_CLK, "sys_xgmac_clk",
"eth_clk", CCU_SYS_XGMAC_BASE, 1),
CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk",
"sys_xgmac_clk", 8),
CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_PTP_CLK, "sys_xgmac_ptp_clk",
"sys_xgmac_clk", 8),
CCU_DIV_GATE_INFO(CCU_SYS_USB_CLK, "sys_usb_clk",
"eth_clk", CCU_SYS_USB_BASE, 10),
CCU_DIV_VAR_INFO(CCU_SYS_PVT_CLK, "sys_pvt_clk",
"ref_clk", CCU_SYS_PVT_BASE, 5,
CLK_SET_RATE_GATE, 0),
CCU_DIV_VAR_INFO(CCU_SYS_HWA_CLK, "sys_hwa_clk",
"sata_clk", CCU_SYS_HWA_BASE, 4,
CLK_SET_RATE_GATE, 0),
CCU_DIV_VAR_INFO(CCU_SYS_UART_CLK, "sys_uart_clk",
"eth_clk", CCU_SYS_UART_BASE, 17,
CLK_SET_RATE_GATE, 0),
CCU_DIV_FIXED_INFO(CCU_SYS_I2C1_CLK, "sys_i2c1_clk",
"eth_clk", 10),
CCU_DIV_FIXED_INFO(CCU_SYS_I2C2_CLK, "sys_i2c2_clk",
"eth_clk", 10),
CCU_DIV_FIXED_INFO(CCU_SYS_GPIO_CLK, "sys_gpio_clk",
"ref_clk", 25),
CCU_DIV_VAR_INFO(CCU_SYS_TIMER0_CLK, "sys_timer0_clk",
"ref_clk", CCU_SYS_TIMER0_BASE, 17,
CLK_SET_RATE_GATE, CCU_DIV_BASIC),
CCU_DIV_VAR_INFO(CCU_SYS_TIMER1_CLK, "sys_timer1_clk",
"ref_clk", CCU_SYS_TIMER1_BASE, 17,
CLK_SET_RATE_GATE, CCU_DIV_BASIC),
CCU_DIV_VAR_INFO(CCU_SYS_TIMER2_CLK, "sys_timer2_clk",
"ref_clk", CCU_SYS_TIMER2_BASE, 17,
CLK_SET_RATE_GATE, CCU_DIV_BASIC),
CCU_DIV_VAR_INFO(CCU_SYS_WDT_CLK, "sys_wdt_clk",
"eth_clk", CCU_SYS_WDT_BASE, 17,
CLK_SET_RATE_GATE, CCU_DIV_SKIP_ONE_TO_THREE)
};
static struct ccu_div_data *axi_data;
static struct ccu_div_data *sys_data;
static void ccu_div_set_data(struct ccu_div_data *data)
{
struct device_node *np = data->np;
if (of_device_is_compatible(np, "baikal,bt1-ccu-axi"))
axi_data = data;
else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys"))
sys_data = data;
else
pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));
}
static struct ccu_div_data *ccu_div_get_data(struct device_node *np)
{
if (of_device_is_compatible(np, "baikal,bt1-ccu-axi"))
return axi_data;
else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys"))
return sys_data;
pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));
return NULL;
}
static struct ccu_div *ccu_div_find_desc(struct ccu_div_data *data,
unsigned int clk_id)
{
int idx;
for (idx = 0; idx < data->divs_num; ++idx) {
if (data->divs_info[idx].id == clk_id)
return data->divs[idx];
}
return ERR_PTR(-EINVAL);
}
static struct ccu_div_data *ccu_div_create_data(struct device_node *np)
{
struct ccu_div_data *data;
int ret;
data = kzalloc_obj(*data);
if (!data)
return ERR_PTR(-ENOMEM);
data->np = np;
if (of_device_is_compatible(np, "baikal,bt1-ccu-axi")) {
data->divs_num = ARRAY_SIZE(axi_info);
data->divs_info = axi_info;
} else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys")) {
data->divs_num = ARRAY_SIZE(sys_info);
data->divs_info = sys_info;
} else {
pr_err("Incompatible DT node '%s' specified\n",
of_node_full_name(np));
ret = -EINVAL;
goto err_kfree_data;
}
data->divs = kzalloc_objs(*data->divs, data->divs_num);
if (!data->divs) {
ret = -ENOMEM;
goto err_kfree_data;
}
return data;
err_kfree_data:
kfree(data);
return ERR_PTR(ret);
}
static void ccu_div_free_data(struct ccu_div_data *data)
{
kfree(data->divs);
kfree(data);
}
static int ccu_div_find_sys_regs(struct ccu_div_data *data)
{
data->sys_regs = syscon_node_to_regmap(data->np->parent);
if (IS_ERR(data->sys_regs)) {
pr_err("Failed to find syscon regs for '%s'\n",
of_node_full_name(data->np));
return PTR_ERR(data->sys_regs);
}
return 0;
}
static struct clk_hw *ccu_div_of_clk_hw_get(struct of_phandle_args *clkspec,
void *priv)
{
struct ccu_div_data *data = priv;
struct ccu_div *div;
unsigned int clk_id;
clk_id = clkspec->args[0];
div = ccu_div_find_desc(data, clk_id);
if (IS_ERR(div)) {
if (div != ERR_PTR(-EPROBE_DEFER))
pr_info("Invalid clock ID %d specified\n", clk_id);
return ERR_CAST(div);
}
return ccu_div_get_clk_hw(div);
}
static int ccu_div_clk_register(struct ccu_div_data *data, bool defer)
{
int idx, ret;
for (idx = 0; idx < data->divs_num; ++idx) {
const struct ccu_div_info *info = &data->divs_info[idx];
struct ccu_div_init_data init = {0};
if (!!(info->features & CCU_DIV_BASIC) ^ defer) {
if (!data->divs[idx])
data->divs[idx] = ERR_PTR(-EPROBE_DEFER);
continue;
}
init.id = info->id;
init.name = info->name;
init.parent_name = info->parent_name;
init.np = data->np;
init.type = info->type;
init.flags = info->flags;
init.features = info->features;
if (init.type == CCU_DIV_VAR) {
init.base = info->base;
init.sys_regs = data->sys_regs;
init.width = info->width;
} else if (init.type == CCU_DIV_GATE) {
init.base = info->base;
init.sys_regs = data->sys_regs;
init.divider = info->divider;
} else if (init.type == CCU_DIV_BUF) {
init.base = info->base;
init.sys_regs = data->sys_regs;
} else {
init.divider = info->divider;
}
data->divs[idx] = ccu_div_hw_register(&init);
if (IS_ERR(data->divs[idx])) {
ret = PTR_ERR(data->divs[idx]);
pr_err("Couldn't register divider '%s' hw\n",
init.name);
goto err_hw_unregister;
}
}
return 0;
err_hw_unregister:
for (--idx; idx >= 0; --idx) {
if (!!(data->divs_info[idx].features & CCU_DIV_BASIC) ^ defer)
continue;
ccu_div_hw_unregister(data->divs[idx]);
}
return ret;
}
static void ccu_div_clk_unregister(struct ccu_div_data *data, bool defer)
{
int idx;
/* Uninstall only the clocks registered on the specified stage */
for (idx = 0; idx < data->divs_num; ++idx) {
if (!!(data->divs_info[idx].features & CCU_DIV_BASIC) ^ defer)
continue;
ccu_div_hw_unregister(data->divs[idx]);
}
}
static int ccu_div_of_register(struct ccu_div_data *data)
{
int ret;
ret = of_clk_add_hw_provider(data->np, ccu_div_of_clk_hw_get, data);
if (ret) {
pr_err("Couldn't register dividers '%s' clock provider\n",
of_node_full_name(data->np));
}
return ret;
}
static int ccu_div_rst_register(struct ccu_div_data *data)
{
struct ccu_rst_init_data init = {0};
init.sys_regs = data->sys_regs;
init.np = data->np;
data->rsts = ccu_rst_hw_register(&init);
if (IS_ERR(data->rsts)) {
pr_err("Couldn't register divider '%s' reset controller\n",
of_node_full_name(data->np));
return PTR_ERR(data->rsts);
}
return 0;
}
static int ccu_div_probe(struct platform_device *pdev)
{
struct ccu_div_data *data;
int ret;
data = ccu_div_get_data(dev_of_node(&pdev->dev));
if (!data)
return -EINVAL;
ret = ccu_div_clk_register(data, false);
if (ret)
return ret;
ret = ccu_div_rst_register(data);
if (ret)
goto err_clk_unregister;
return 0;
err_clk_unregister:
ccu_div_clk_unregister(data, false);
return ret;
}
static const struct of_device_id ccu_div_of_match[] = {
{ .compatible = "baikal,bt1-ccu-axi" },
{ .compatible = "baikal,bt1-ccu-sys" },
{ }
};
static struct platform_driver ccu_div_driver = {
.probe = ccu_div_probe,
.driver = {
.name = "clk-ccu-div",
.of_match_table = ccu_div_of_match,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(ccu_div_driver);
static __init void ccu_div_init(struct device_node *np)
{
struct ccu_div_data *data;
int ret;
data = ccu_div_create_data(np);
if (IS_ERR(data))
return;
ret = ccu_div_find_sys_regs(data);
if (ret)
goto err_free_data;
ret = ccu_div_clk_register(data, true);
if (ret)
goto err_free_data;
ret = ccu_div_of_register(data);
if (ret)
goto err_clk_unregister;
ccu_div_set_data(data);
return;
err_clk_unregister:
ccu_div_clk_unregister(data, true);
err_free_data:
ccu_div_free_data(data);
}
CLK_OF_DECLARE_DRIVER(ccu_axi, "baikal,bt1-ccu-axi", ccu_div_init);
CLK_OF_DECLARE_DRIVER(ccu_sys, "baikal,bt1-ccu-sys", ccu_div_init);

277
drivers/clk/baikal-t1/clk-ccu-pll.c
View File

@ -1,277 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Authors:
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
* Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
*
* Baikal-T1 CCU PLL clocks driver
*/
#define pr_fmt(fmt) "bt1-ccu-pll: " fmt
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/ioport.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/bt1-ccu.h>
#include "ccu-pll.h"
#define CCU_CPU_PLL_BASE 0x000
#define CCU_SATA_PLL_BASE 0x008
#define CCU_DDR_PLL_BASE 0x010
#define CCU_PCIE_PLL_BASE 0x018
#define CCU_ETH_PLL_BASE 0x020
#define CCU_PLL_INFO(_id, _name, _pname, _base, _flags, _features) \
{ \
.id = _id, \
.name = _name, \
.parent_name = _pname, \
.base = _base, \
.flags = _flags, \
.features = _features, \
}
#define CCU_PLL_NUM ARRAY_SIZE(pll_info)
struct ccu_pll_info {
unsigned int id;
const char *name;
const char *parent_name;
unsigned int base;
unsigned long flags;
unsigned long features;
};
/*
* Alas we have to mark all PLLs as critical. CPU and DDR PLLs are sources of
* CPU cores and DDR controller reference clocks, due to which they obviously
* shouldn't be ever gated. SATA and PCIe PLLs are the parents of APB-bus and
* DDR controller AXI-bus clocks. If they are gated the system will be
* unusable. Moreover disabling SATA and Ethernet PLLs causes automatic reset
* of the corresponding subsystems. So until we aren't ready to re-initialize
* all the devices consuming those PLLs, they will be marked as critical too.
*/
static const struct ccu_pll_info pll_info[] = {
CCU_PLL_INFO(CCU_CPU_PLL, "cpu_pll", "ref_clk", CCU_CPU_PLL_BASE,
CLK_IS_CRITICAL, CCU_PLL_BASIC),
CCU_PLL_INFO(CCU_SATA_PLL, "sata_pll", "ref_clk", CCU_SATA_PLL_BASE,
CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0),
CCU_PLL_INFO(CCU_DDR_PLL, "ddr_pll", "ref_clk", CCU_DDR_PLL_BASE,
CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0),
CCU_PLL_INFO(CCU_PCIE_PLL, "pcie_pll", "ref_clk", CCU_PCIE_PLL_BASE,
CLK_IS_CRITICAL, CCU_PLL_BASIC),
CCU_PLL_INFO(CCU_ETH_PLL, "eth_pll", "ref_clk", CCU_ETH_PLL_BASE,
CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0)
};
struct ccu_pll_data {
struct device_node *np;
struct regmap *sys_regs;
struct ccu_pll *plls[CCU_PLL_NUM];
};
static struct ccu_pll_data *pll_data;
static struct ccu_pll *ccu_pll_find_desc(struct ccu_pll_data *data,
unsigned int clk_id)
{
int idx;
for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
if (pll_info[idx].id == clk_id)
return data->plls[idx];
}
return ERR_PTR(-EINVAL);
}
static struct ccu_pll_data *ccu_pll_create_data(struct device_node *np)
{
struct ccu_pll_data *data;
data = kzalloc_obj(*data);
if (!data)
return ERR_PTR(-ENOMEM);
data->np = np;
return data;
}
static void ccu_pll_free_data(struct ccu_pll_data *data)
{
kfree(data);
}
static int ccu_pll_find_sys_regs(struct ccu_pll_data *data)
{
data->sys_regs = syscon_node_to_regmap(data->np->parent);
if (IS_ERR(data->sys_regs)) {
pr_err("Failed to find syscon regs for '%s'\n",
of_node_full_name(data->np));
return PTR_ERR(data->sys_regs);
}
return 0;
}
static struct clk_hw *ccu_pll_of_clk_hw_get(struct of_phandle_args *clkspec,
void *priv)
{
struct ccu_pll_data *data = priv;
struct ccu_pll *pll;
unsigned int clk_id;
clk_id = clkspec->args[0];
pll = ccu_pll_find_desc(data, clk_id);
if (IS_ERR(pll)) {
if (pll != ERR_PTR(-EPROBE_DEFER))
pr_info("Invalid PLL clock ID %d specified\n", clk_id);
return ERR_CAST(pll);
}
return ccu_pll_get_clk_hw(pll);
}
static int ccu_pll_clk_register(struct ccu_pll_data *data, bool defer)
{
int idx, ret;
for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
const struct ccu_pll_info *info = &pll_info[idx];
struct ccu_pll_init_data init = {0};
/* Defer non-basic PLLs allocation for the probe stage */
if (!!(info->features & CCU_PLL_BASIC) ^ defer) {
if (!data->plls[idx])
data->plls[idx] = ERR_PTR(-EPROBE_DEFER);
continue;
}
init.id = info->id;
init.name = info->name;
init.parent_name = info->parent_name;
init.base = info->base;
init.sys_regs = data->sys_regs;
init.np = data->np;
init.flags = info->flags;
init.features = info->features;
data->plls[idx] = ccu_pll_hw_register(&init);
if (IS_ERR(data->plls[idx])) {
ret = PTR_ERR(data->plls[idx]);
pr_err("Couldn't register PLL hw '%s'\n",
init.name);
goto err_hw_unregister;
}
}
return 0;
err_hw_unregister:
for (--idx; idx >= 0; --idx) {
if (!!(pll_info[idx].features & CCU_PLL_BASIC) ^ defer)
continue;
ccu_pll_hw_unregister(data->plls[idx]);
}
return ret;
}
static void ccu_pll_clk_unregister(struct ccu_pll_data *data, bool defer)
{
int idx;
/* Uninstall only the clocks registered on the specified stage */
for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
if (!!(pll_info[idx].features & CCU_PLL_BASIC) ^ defer)
continue;
ccu_pll_hw_unregister(data->plls[idx]);
}
}
static int ccu_pll_of_register(struct ccu_pll_data *data)
{
int ret;
ret = of_clk_add_hw_provider(data->np, ccu_pll_of_clk_hw_get, data);
if (ret) {
pr_err("Couldn't register PLL provider of '%s'\n",
of_node_full_name(data->np));
}
return ret;
}
static int ccu_pll_probe(struct platform_device *pdev)
{
struct ccu_pll_data *data = pll_data;
if (!data)
return -EINVAL;
return ccu_pll_clk_register(data, false);
}
static const struct of_device_id ccu_pll_of_match[] = {
{ .compatible = "baikal,bt1-ccu-pll" },
{ }
};
static struct platform_driver ccu_pll_driver = {
.probe = ccu_pll_probe,
.driver = {
.name = "clk-ccu-pll",
.of_match_table = ccu_pll_of_match,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(ccu_pll_driver);
static __init void ccu_pll_init(struct device_node *np)
{
struct ccu_pll_data *data;
int ret;
data = ccu_pll_create_data(np);
if (IS_ERR(data))
return;
ret = ccu_pll_find_sys_regs(data);
if (ret)
goto err_free_data;
ret = ccu_pll_clk_register(data, true);
if (ret)
goto err_free_data;
ret = ccu_pll_of_register(data);
if (ret)
goto err_clk_unregister;
pll_data = data;
return;
err_clk_unregister:
ccu_pll_clk_unregister(data, true);
err_free_data:
ccu_pll_free_data(data);
}
CLK_OF_DECLARE_DRIVER(ccu_pll, "baikal,bt1-ccu-pll", ccu_pll_init);

48
include/dt-bindings/clock/bt1-ccu.h
View File

@ -1,48 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
*
* Baikal-T1 CCU clock indices
*/
#ifndef __DT_BINDINGS_CLOCK_BT1_CCU_H
#define __DT_BINDINGS_CLOCK_BT1_CCU_H
#define CCU_CPU_PLL 0
#define CCU_SATA_PLL 1
#define CCU_DDR_PLL 2
#define CCU_PCIE_PLL 3
#define CCU_ETH_PLL 4
#define CCU_AXI_MAIN_CLK 0
#define CCU_AXI_DDR_CLK 1
#define CCU_AXI_SATA_CLK 2
#define CCU_AXI_GMAC0_CLK 3
#define CCU_AXI_GMAC1_CLK 4
#define CCU_AXI_XGMAC_CLK 5
#define CCU_AXI_PCIE_M_CLK 6
#define CCU_AXI_PCIE_S_CLK 7
#define CCU_AXI_USB_CLK 8
#define CCU_AXI_HWA_CLK 9
#define CCU_AXI_SRAM_CLK 10
#define CCU_SYS_SATA_REF_CLK 0
#define CCU_SYS_APB_CLK 1
#define CCU_SYS_GMAC0_TX_CLK 2
#define CCU_SYS_GMAC0_PTP_CLK 3
#define CCU_SYS_GMAC1_TX_CLK 4
#define CCU_SYS_GMAC1_PTP_CLK 5
#define CCU_SYS_XGMAC_REF_CLK 6
#define CCU_SYS_XGMAC_PTP_CLK 7
#define CCU_SYS_USB_CLK 8
#define CCU_SYS_PVT_CLK 9
#define CCU_SYS_HWA_CLK 10
#define CCU_SYS_UART_CLK 11
#define CCU_SYS_I2C1_CLK 12
#define CCU_SYS_I2C2_CLK 13
#define CCU_SYS_GPIO_CLK 14
#define CCU_SYS_TIMER0_CLK 15
#define CCU_SYS_TIMER1_CLK 16
#define CCU_SYS_TIMER2_CLK 17
#define CCU_SYS_WDT_CLK 18
#endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */