diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi
new file mode 100644
index 000000000000..3422058ac480
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-common.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie2 {
+	pinctrl-0 = <&pcie2_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&tlmm {
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio25";
+			function = "pcie1_clk";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio27";
+			function = "pcie1_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie2_default: pcie2-default-state {
+		clkreq-n-pins {
+			pins = "gpio28";
+			function = "pcie2_clk";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio29";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio30";
+			function = "pcie2_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio31";
+			function = "pcie3_clk";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio33";
+			function = "pcie3_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 73091067bad2..88439697c074 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,128 +8,14 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
 #include "ipq9574-rdp-common.dtsi"
+#include "ipq9574-rdp433-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
 };
 
-&pcie1_phy {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default>;
-	pinctrl-names = "default";
-
-	perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pcie2_phy {
-	status = "okay";
-};
-
-&pcie2 {
-	pinctrl-0 = <&pcie2_default>;
-	pinctrl-names = "default";
-
-	perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pcie3_phy {
-	status = "okay";
-};
-
-&pcie3 {
-	pinctrl-0 = <&pcie3_default>;
-	pinctrl-names = "default";
-
-	perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
 &qpic_nand {
 	status = "okay";
 };
-
-&tlmm {
-
-	pcie1_default: pcie1-default-state {
-		clkreq-n-pins {
-			pins = "gpio25";
-			function = "pcie1_clk";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-low;
-		};
-
-		wake-n-pins {
-			pins = "gpio27";
-			function = "pcie1_wake";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	pcie2_default: pcie2-default-state {
-		clkreq-n-pins {
-			pins = "gpio28";
-			function = "pcie2_clk";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			output-low;
-		};
-
-		wake-n-pins {
-			pins = "gpio30";
-			function = "pcie2_wake";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	pcie3_default: pcie3-default-state {
-		clkreq-n-pins {
-			pins = "gpio31";
-			function = "pcie3_clk";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-			output-low;
-		};
-
-		wake-n-pins {
-			pins = "gpio33";
-			function = "pcie3_wake";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-};