* Add Core, Regulator, Onkey and Battery Charger support for the NXP PF1550
Power Management IC (PMIC).
* Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc.
* Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the tqmx86 driver.
* Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver.
* Hook up the qnap-mcu-eeprom sub-device to qnap-mcu.
* Enable compile testing for the Altera SOCFPGA System Manager driver.
* Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle().
* Reserve the unused second I2C address for DA9063 to prevent userspace
interference.
* Fix resource leak in da9055_device_init() by calling regmap_del_irq_chip()
in the error path.
* Fix potential IRQ chip conflict when probing multiple MAX77620 devices by
using devm_kmemdup for regmap_irq_chip.
* Return -EPROBE_DEFER when a syscon devuice is not found to allow deferred
probing.
* Update email address for the PF1550 PMIC driver in MAINTAINERS.
* Correct file entry for PF1550 MFD driver in MAINTAINERS from pfd1550.h to
pf1550.h.
* Calculate checksum on the actual number of received bytes in qnap-mcu for
error messages.
* Use -EPROTO instead of -EIO for checksum errors in qnap-mcu.
* Add proper error handling for command errors (e.g., "@8", "@9") in qnap-mcu.
* Fix missing irq_domain_remove() in error path of mt63{58,97}_irq_init().
* Mark SMC write buffer arguments as const in apple_smc_write(), apple_smc_rw(),
and apple_smc_write_atomic().
* Simplify the error handling path in da9055_device_init() by removing a
redundant mfd_remove_devices() call.
* Use regmap_reg_range() and a real one-element array for pmic_status_range in
rohm-bd718x7 for cleaner initialization.
* Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures when
I2C_K1's dependencies are disabled.
* Remove unneeded semicolon from ls2k_bmc_recover_pci_data().
* Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider compile testing
and non-OF systems.
* Make OF ID table style consistent in simple-mfd-i2c driver.
* Update header inclusions in simple-mfd-i2c to follow IWYU (Include What You
Use) principle.
* Move checksum verification logic to a separate function in qnap-mcu.
* Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify interrupt
handling.
* Drop a stray semicolon from sec-irq.c.
* Remove the unused TI WL1273 FM radio core driver.
* Remove the unused wl1273-core.h header and tidy up its reference in
documentation.
* Add Device Tree binding for the NXP PF1550 PMIC.
* Add missing GPIO pins and supply properties to the Silergy SY7636A PMIC
binding.
* Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination.
* Add Device Tree binding for the Renesas R2A11302FT PMIC.
* Allow the wakeup-source property in the Dialog DA9063 binding.
* Make interrupt-related properties optional in the TI TPS65910 PMIC binding.
* Document the Qualcomm PMIV0104 PMIC compatible string.
* Document the Qualcomm PM7550 PMIC compatible string.
* Enable power button subnode for TWL603x in the TI TWL binding.
* Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties.
* Document control-scb and sysreg-scb syscons on pic64gx with fallback
compatibles.
* Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu.
* Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child nodes and
missing properties.
* Add mt7981-topmisc compatible string to the syscon binding.
-----BEGIN PGP SIGNATURE-----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=2TS8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Updates:
- Add Core, Regulator, Onkey and Battery Charger support for the NXP
PF1550 Power Management IC (PMIC)
- Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc
- Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the
tqmx86 driver
- Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver
- Hook up the qnap-mcu-eeprom sub-device to qnap-mcu
Fixes:
- Enable compile testing for the Altera SOCFPGA System Manager driver
- Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle()
- Reserve the unused second I2C address for DA9063 to prevent
userspace interference
- Fix resource leak in da9055_device_init() by calling
regmap_del_irq_chip() in the error path
- Fix potential IRQ chip conflict when probing multiple MAX77620
devices by using devm_kmemdup for regmap_irq_chip
- Return -EPROBE_DEFER when a syscon devuice is not found to allow
deferred probing
- Update email address for the PF1550 PMIC driver in MAINTAINERS
- Correct file entry for PF1550 MFD driver in MAINTAINERS from
pfd1550.h to pf1550.h
- Calculate checksum on the actual number of received bytes in
qnap-mcu for error messages
- Use -EPROTO instead of -EIO for checksum errors in qnap-mcu
- Add proper error handling for command errors (e.g., "@8", "@9") in
qnap-mcu
- Fix missing irq_domain_remove() in error path of
mt63{58,97}_irq_init()
Cleanups:
- Mark SMC write buffer arguments as const in apple_smc_write(),
apple_smc_rw(), and apple_smc_write_atomic()
- Simplify the error handling path in da9055_device_init() by
removing a redundant mfd_remove_devices() call
- Use regmap_reg_range() and a real one-element array for
pmic_status_range in rohm-bd718x7 for cleaner initialization
- Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures
when I2C_K1's dependencies are disabled
- Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
- Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider
compile testing and non-OF systems
- Make OF ID table style consistent in simple-mfd-i2c driver
- Update header inclusions in simple-mfd-i2c to follow IWYU (Include
What You Use) principle
- Move checksum verification logic to a separate function in qnap-mcu
- Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify
interrupt handling
- Drop a stray semicolon from sec-irq.c
Removals:
- Remove the unused TI WL1273 FM radio core driver
- Remove the unused wl1273-core.h header and tidy up its reference in
documentation
Device tree bindings:
- Add Device Tree binding for the NXP PF1550 PMIC
- Add missing GPIO pins and supply properties to the Silergy SY7636A
PMIC binding
- Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination
- Add Device Tree binding for the Renesas R2A11302FT PMIC
- Allow the wakeup-source property in the Dialog DA9063 binding
- Make interrupt-related properties optional in the TI TPS65910 PMIC
binding
- Document the Qualcomm PMIV0104 PMIC compatible string
- Document the Qualcomm PM7550 PMIC compatible string
- Enable power button subnode for TWL603x in the TI TWL binding
- Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties
- Document control-scb and sysreg-scb syscons on pic64gx with
fallback compatibles
- Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu
- Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child
nodes and missing properties
- Add mt7981-topmisc compatible string to the syscon binding"
* tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits)
mfd: sec: Drop a stray semicolon
mfd: qnap-mcu: Hook up the EEPROM sub-device
dt-bindings: mfd: syscon: Add mt7981-topmisc
dt-bindings: mfd: fsl,mc13xxx: Fix LEDs node schema
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path
dt-bindings: mfd: Document syscons falling back to atmel,sama5d2-sfrbu
dt-bindings: mfd: Document control-scb and sysreg-scb on pic64gx
dt-bindings: mfd: Convert dlg,da9052-i2c.txt to yaml format
mfd: sec: Use chained IRQs for s2mpg10
mfd: qnap-mcu: Add proper error handling for command errors
mfd: qnap-mcu: Move checksum verification to its own function
mfd: qnap-mcu: Use EPROTO in stead of EIO on checksum errors
mfd: qnap-mcu: Calculate the checksum on the actual number of bytes received
mfd: simple-mfd-i2c: Don't use "proxy" headers
mfd: simple-mfd-i2c: Make ID table style consistent
mfd: Kconfig: Drop OF dependency on MFD_MAX5970
mfd: ls2kbmc: Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
dt-bindings: mfd: twl: Enable power button also for TWL603X
MAINTAINERS: Adjust file entry in NXP PF1550 PMIC MFD DRIVER
...
Add a document that describes the different variants of the Rockchip
Camera Interface (CIF), their hardware layout, as well as their
representation in the media controller centric rkcif device driver,
which is located under drivers/media/platform/rockchip/rkcif.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add documentation explaining the ability to capture statistics from
the mali-c55 driver's new V4L2 device, as well as the various tap
points from which those statistics can be drawn in the ISP's
processing flow. Additionally add a page detailing the new V4L2
meta format for the mali-c55 statistics.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a documentation page for the mali-c55 driver, which gives a brief
overview of the hardware and explains how to use the driver's capture
devices and the crop/scaler functions.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The wl1273 FM radio is on Arnd's unused driver list:
https://lore.kernel.org/lkml/a15bb180-401d-49ad-a212-0c81d613fbc8@app.fastmail.com/
Other patches have removed the core, the ASoC code and the Radio code.
With all those in, remove the header.
Also, tidy the ref in the docs.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
- Bring the kernel memory-model docs into the Sphinx build in the "literal
include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate HTML
redirects; this can be used on kernel.org (or any other site hosting the
rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink protocol.
- A significant update of the maintainer's PGP guide.
...and a seemingly endless series of typo fixes, build-problem fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmjbwOoACgkQF0NaE2wM
flis1gf/ZvRi3Mo5hIsuGyQfs5kw/jx0N7SG4QYf2rEnt5ZGNa5SkyOVKsWQKTgK
LesQkdaCA0xHMoUWSvZRwn2a0+acpeMm6viXjewd2mU52sSNmSkKG4WsZyxfnOYS
36fkZ1qymQkJ4uSvx5NScTiIBqZx+Qfgkj0eNnXcpJd2vYeAVSu4szsFxeUvcJFj
Ckq3+3DQ5p/dcWwgvdlLKEJGj98Q3cqLrMn8ycbNtwzo3mdVbrlP5+qqNslZC6xY
Nqpv9HXbFWNCaL6YWCybcNOZ4F5UVno1ap2F3imTD8Rp1iG77zAQV5lMlq4Gksf4
kECLc1TtTKSgmgWHmi1sgudqM4Xqpw==
=Qe3Z
-----END PGP SIGNATURE-----
Merge tag 'docs-6.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
The ov6650 driver was introduced in v2.6.37 to support the OMAP1-based
Amstrad Delta video phone. The platform still has a board file in the
kernel, but support for the camera was dropped in commit ce548396a4
("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
in v5.9. The driver has been unused since as it has received neither
ACPI nor DT support.
The ov6650 driver is one of the last sensor drivers calling
clk_set_rate(). This is deprecated, and calls to the function are being
removed to avoid cargo-cult. As the driver is unlikely to ever be used
again, drop it instead of trying to avoid call clk_set_rate().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the file 'c3-isp.rst' that documents the c3-isp driver.
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add some basic info about the HW/driver + contact info.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
With commit dcbb01fbb7 ("x86/pci: Remove old STA2x11 support"), the
STA2X11 Video Input Port driver is not needed and cannot be built anymore.
Remove the driver and its reference in media documentation.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Document the (new) mgb4 GMSL modules variants.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Correct the erroneous spelling of 'responsible' in
Documentation/admin-guide/media/cec.rst. This fixes all errors
pointed out by codespell in the file.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
*almost* ready at the beginning of the merge window:
- A new document on debugging techniques from Sebastian Fricke
- A clarification on MODULE_LICENSE terms meant to head off the sort of
confusion that led to the recent Tuxedo Computers mess.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmdFEf0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLCQH+wY0lGEF5BloFrNOcwKoB96rXQjLMlPVpccP
lWVprapS+NrlhTq4RZ9b6qbQ1RAdu0JCppew1viwclO8g8SmUoXmqNnlYIFH+3MB
HZETbPWUHK2BRQqV7h3VkgvO30hUa0kHL3WfmKpGEG1P6FsQQ5o3WDi3YN8GM6xk
tfHSiR4rgBw40VLyeDtRi++aEgYa/DfWpdtco58poCiAS6soTDDEWCxSBdibeDOQ
YDuj1NtqieMk963z8CoJm/Qbw/ZLfW2jd3A43cZ0h6g/oloVYSucFcMjXpePvoZr
9BSkU9OyX5BRfhU/6EbU8eWYjgu0BuBk5uvCwkQgHz1p05MGRDE=
=MmbD
-----END PGP SIGNATURE-----
Merge tag 'docs-6.13-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A few late-arriving fixes, plus two more significant changes that were
*almost* ready at the beginning of the merge window:
- A new document on debugging techniques from Sebastian Fricke
- A clarification on MODULE_LICENSE terms meant to head off the sort
of confusion that led to the recent Tuxedo Computers mess"
* tag 'docs-6.13-2' of git://git.lwn.net/linux:
docs: Add debugging guide for the media subsystem
docs: Add debugging section to process
docs/licensing: Clarify wording about "GPL" and "Proprietary"
docs: core-api/gfp_mask-from-fs-io: indicate that vmalloc supports GFP_NOFS/GFP_NOIO
Documentation: kernel-doc: enumerate identifier *type*s
Documentation: pwrseq: Fix trivial misspellings
Documentation: filesystems: update filename extensions
Provide a guide for developers on how to debug code with a focus on the
media subsystem. This document aims to provide a rough overview over the
possibilities and a rational to help choosing the right tool for the
given circumstances.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241028-media_docs_improve_v3-v3-2-edf5c5b3746f@collabora.com
Due to recent changes on the way we're maintaining media, the
location of the main tree was updated.
Change docs accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
The omap4 camera driver has seen no progress since forever, and
now OMAP4 support has also been dropped from u-boot (1). So it is
time to retire this driver.
(1): https://lists.denx.de/pipermail/u-boot/2024-July/558846.html
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZry1ZyIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kkTQBAKZm34xgUyqh
NjrFd4QEARsXbsH+6kZrh40prVzws97eAQDUM+OVykg6+mmuVOZITdX6+KRLxv5e
bo+X5a+yYOW0BQ==
=X2AX
-----END PGP SIGNATURE-----
Merge tag 'next-media-rkisp1-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Extensible parameters support for the rkisp1 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Properly document the function of the mgb4 output "frame_rate" sysfs
parameter and update the default DV timings values according to the latest
code changes.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The vivid driver supports media controller support for quite a long
time now, so drop that from the list.
Since commit 4c4dacb052 ("media: vivid: loopback based on
'Connected To' controls") making EDID changes causes correct signaling
to happen, but what is still missing is the 100 ms delay required before
signaling that there is an HPD. Modify this TODO item accordingly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
- Empia EM2860 USB bridge
- Philips SAA7113 video decoder
- NXP TDA9801T demodulator
- Tena TNF931D-DFDR1 tuner
- ST HCF4052 demux, switches input audio to Line Out
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Modify section "Video and Sliced VBI Looping" in Documentation to explain
the vivid loopback support for video across multiple vivid instances.
Previous documentation is out-of-date as it was explaining looping in a
single vivid instance only.
Also, in "Some Future Improvements" the item "Add support to loop
from a specific output to a specific input across vivid instances"
can be dropped since that's now implemented.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.
The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Modifying documentation to remove 'Capture Overlay section' as
destructive capture overlay support was removed.
See commit ccaa9d50ca ("media: vivid: drop overlay support")
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop the "Video, VBI and RDS Looping" section, instead moving the
Video/VBI info to section "Video and Sliced VBI looping" and the
RDS info to section "Radio & RDS Looping".
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documentation contained several instances of "section X"
references, which no longer map to whatever X was.
Replace these by the section titles.
Also fix a single confusing typo in the "Radio & RDS Looping" section:
"are regular frequency intervals" -> "at regular frequency intervals"
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add documentation for the PiSP Back End memory-to-memory ISP.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag)
was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag
to media-ctl commands for X1 Yoga, lower-case v only makes it verbose
upper-case V sets the format.
Signed-off-by: Samuel Wein <sam@samwein.com>
[Sakari Ailus: Align subject line, rewrap commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This document mainly describe the functionality of IPU6 and IPU6 isys
driver, and gives an example that how user can do imaging capture with
tools.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix the mgb4 driver documentation structure that breaks the
"Video4Linux (V4L) driver-specific documentation" outline.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Also document stable frames and what it means for testing tools.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add media: prefix to Subject]
Correct the default value of node_type vivid parameter to 0xe1d3d.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=KPPn
-----END PGP SIGNATURE-----
Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
Add AV1 information in visl documentation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Vegard Nossum writes:
This patch series replaces some instances of 'class:: toc-title' with
toctree's :caption: attribute, see the last patch in the series for some
more rationale/explanation.
"class:: toc-title" was a workaround for older Sphinx versions that are
no longer supported.
The canonical way to add a heading to the ToC is to use :caption:.
Do that.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231027081830.195056-4-vegard.nossum@oracle.com
Add starfive_camss.rst file that documents the Starfive Camera
Subsystem driver which is used for handing image sensor data.
Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The canonical location for the tracefs filesystem is at
/sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Update the visl decoder driver documentation to use this tracefs path.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "admin-guide" documentation for the Digiteq Automotive MGB4 driver.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Linus Torvalds