This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for
power management, as a preparation for future Tegra specific
changes.
- Reset controller updates with added drivers for LAN969x, eic770
and RZ/G3S SoCs.
- Protection of system controller registers on Renesas and Google SoCs,
to prevent trivially triggering a system crash from e.g. debugfs
access.
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas
-----BEGIN PGP SIGNATURE-----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=HvlN
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95
-----BEGIN PGP SIGNATURE-----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=Fkue
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
Merge cpuidle and power capping updates for 6.19-rc1:
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the cpufreq
core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up muliple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat Lake
processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
* pm-cpuidle:
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
cpuidle: governors: teo: Add missing space to the description
cpuidle: governors: teo: Simplify intercepts-based state lookup
cpuidle: governors: teo: Fix tick_intercepts handling in teo_update()
cpuidle: governors: teo: Rework the handling of tick wakeups
cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
cpuidle: governors: teo: Use s64 consistently in teo_update()
cpuidle: governors: teo: Drop redundant function parameter
cpuidle: governors: teo: Drop misguided target residency check
cpuidle: teo: Use this_cpu_ptr() where possible
cpuidle: Add sanity check for exit latency and target residency
cpuidle: menu: Use residency threshold in polling state override decisions
* pm-powercap:
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
powercap: intel_rapl: Add support for Nova Lake processors
powercap: intel_rapl: Add support for Wildcat Lake platform
Replace open-coded getting root OF node and matching against it with
new of_machine_device_match() helper.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-5-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
It turns out that the change in commit 76934e495c ("cpuidle: Add
sanity check for exit latency and target residency") goes too far
because there are systems in the field on which the check introduced
by that commit does not pass.
For this reason, change __cpuidle_driver_init() return type back to void
and make it print a warning when the check mentioned above does not
pass.
Fixes: 76934e495c ("cpuidle: Add sanity check for exit latency and target residency")
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/linux-pm/20251121010756.6687-1-val@packett.cool/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2808566.mvXUDI8C0e@rafael.j.wysocki
While cleaning up some headers, I got a build error on this file:
drivers/cpuidle/poll_state.c:52:2: error: call to undeclared library function 'snprintf' with type 'int (char *restrict, unsigned long, const char *restrict, ...)'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124205752.1328701-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CPU system wakeup QoS limit must be respected for the regular cpuidle
state selection. Therefore, let's extend the common governor helper
cpuidle_governor_latency_req(), to take the constraint into account.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-6-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A CPU system wakeup QoS limit may have been requested by user space. To
avoid breaking this constraint when entering a low power state during
s2idle, let's start to take into account the QoS limit.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-5-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Simplify the loop looking up a candidate idle state in the case when an
intercept is likely to occur by adding a search for the state index limit
if the tick is stopped before it.
First, call tick_nohz_tick_stopped() just once and if it returns true,
look for the shallowest state index below the current candidate one with
target residency at least equal to the tick period length.
Next, simply look for a state that is not shallower than the one found
in the previous step and satisfies the intercepts majority condition (if
there are no such states, the shallowest state that is not shallower
than the one found in the previous step becomes the new candidate).
Since teo_state_ok() has no callers any more after the above changes,
drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Changelog clarification and code comment edit ]
Link: https://patch.msgid.link/2418792.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The condition deciding whether or not to increase cpu_data->tick_intercepts
in teo_update() is reverse, so fix it.
Fixes: d619b5cc67 ("cpuidle: teo: Simplify counting events used for tick management")
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: 0796ddf4a7f0: cpuidle: teo: Use this_cpu_ptr() where possible
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: 8f3f01082d7a: cpuidle: governors: teo: Use s64 consistently in teo_update()
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: b54df61c7428: cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
Cc: 6.14+ <stable@vger.kernel.org> 6.14+: 083654ded547: cpuidle: governors: teo: Rework the handling of tick wakeups
Cc: 6.14+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5085160.31r3eYUQgx@rafael.j.wysocki
If the wakeup pattern is clearly dominated by tick wakeups, count those
wakeups as hits on the deepest available idle state to increase the
likelihood of stopping the tick, especially on systems where there are
only 2 usable idle states and the tick can only be stopped when the
deeper state is selected.
This change is expected to reduce power on some systems where state 0 is
selected relatively often even though they are almost idle. Without it,
the governor may end up selecting the shallowest idle state all the time
even if the system is almost completely idle due all tick wakeups being
counted as hits on that state and preventing the tick from being stopped
at all.
Fixes: 4b20b07ce7 ("cpuidle: teo: Don't count non-existent intercepts")
Reported-by: Reka Norman <rekanorman@chromium.org>
Closes: https://lore.kernel.org/linux-pm/CAEmPcwsNMNnNXuxgvHTQ93Mx-q3Oz9U57THQsU_qdcCx1m4w5g@mail.gmail.com/
Tested-by: Reka Norman <rekanorman@chromium.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 92ce5c07b7a1: cpuidle: teo: Reorder candidate state index checks
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: ea185406d1ed: cpuidle: teo: Combine candidate state index checks against 0
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: b9a6af26bd83: cpuidle: teo: Drop local variable prev_intercept_idx
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: e24f8a55de50: cpuidle: teo: Clarify two code comments
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: d619b5cc6780: cpuidle: teo: Simplify counting events used for tick management
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 13ed5c4a6d9c: cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: ddcfa7964677: cpuidle: teo: Simplify handling of total events count
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 65e18e654475: cpuidle: teo: Replace time_span_ns with a flag
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 0796ddf4a7f0: cpuidle: teo: Use this_cpu_ptr() where possible
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 8f3f01082d7a: cpuidle: governors: teo: Use s64 consistently in teo_update()
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: b54df61c7428: cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Rebase on commit 0796ddf4a7, changelog update ]
Link: https://patch.msgid.link/6228387.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a given governor metric falls below a certain value (8 for
DECAY_SHIFT equal to 3), it will not decay any more due to the
simplistic decay implementation. This may in some cases lead to
subtle inconsistencies in the governor behavior, so change the
decay implementation to take it into account and set the metric
at hand to 0 in that case.
Suggested-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2819353.mvXUDI8C0e@rafael.j.wysocki
Two local variables in teo_update() are defined as u64, but their
values are then compared with s64 values, so it is more consistent
to use s64 as their data type.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3026616.e9J7NaK4W3@rafael.j.wysocki
The last no_poll parameter of teo_find_shallower_state() is always
false, so drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2253109.irdbgypaU6@rafael.j.wysocki
When the target residency of the current candidate idle state is
greater than the expected time till the closest timer (the sleep
length), it does not matter whether or not the tick has already been
stopped or if it is going to be stopped. The closest timer will
trigger anyway at its due time, so if an idle state with target
residency above the sleep length is selected, energy will be wasted
and there may be excess latency.
Of course, if the closest timer were canceled before it could trigger,
a deeper idle state would be more suitable, but this is not expected
to happen (generally speaking, hrtimers are not expected to be
canceled as a rule).
Accordingly, the teo_state_ok() check done in that case causes energy to
be wasted more often than it allows any energy to be saved (if it allows
any energy to be saved at all), so drop it and let the governor use the
teo_find_shallower_state() return value as the new candidate idle state
index.
Fixes: 21d28cd2fa ("cpuidle: teo: Do not call tick_nohz_get_sleep_length() upfront")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5955081.DvuYhMxLoT@rafael.j.wysocki
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make __cpuidle_driver_init() fail if the exit latency of one of the
driver's idle states is less than its target residency which would
break cpuidle assumptions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Changelog fix ]
Link: https://patch.msgid.link/12779486.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some RISC-V updates for v6.18-rc5, including:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible
to assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmkNH1oACgkQx4+xDQu9
Kks0PxAAhPpdyiNaACMUvyXqUp5H6ARZlvrIQuDzJDID38ESlLZDYi51o67XH/nS
4zXUaEGv6Y97Zh7X/H1l635rq+gPlWq1vNo68B5XujHQpib8FGj5Zoll2uYp8fEJ
67t/2TnHRlCVD8FiIxmRn0Z/QtNoSTSJkkF9bsE+KtwHG1tIplBrL9DaqQ9vSltC
5O4E304KwGpeoHLSOrAC2gryQcxNR+LvZMelz/Nin/nXRG2vWjk+zt60whJGywP+
JbBuIu10F1AkHVnznpECDnACasbELyM9195mgazWBJbB9PjoA+NzRxRDy9nWnRRe
U2LKfbVLCvbud7a4ehwWg7zE69D+ofhF6e8e5RXUaGwkw1Q/XVMTv9YeZYnRZpIn
PiJV4/eDsgTwnHMLeJs7b6/gSthLBxCIpRZ3JFmo+dqHT/Zzx72qHKqPyaq7mapn
HqWzwSU35kuLwJqrmTPWYWhRvnmp57PMP1cKxqIEKJLPoOeTtBOuvW+DJMs2+m2J
6Ubm3LRzrrRllHWD1jCGurRJ3HsBBOfsK/COIeiyc2GgHU+8Io9dJ2y+M9eOx62L
dJB7KSVd0a9K+mrCYIxRWD+OXBpCPGzT7NjI4btzOVR7astHNUdwrQ3cOcRp6yu2
+wSKTFp7M/pRPZpBfWT8cgYO3jc0oeHgy6LU8zbuu99mVeQSEcs=
=BWQb
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible to
assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
* tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
cpuidle: riscv-sbi: Replace deprecated strcpy in sbi_cpuidle_init_cpu
riscv: KGDB: Replace deprecated strcpy in kgdb_arch_handle_qxfer_pkt
riscv: asm: use .insn for making custom instructions
riscv: tests: Make RISCV_KPROBES_KUNIT tristate
riscv: tests: Rename kprobes_test_riscv to kprobes_riscv
riscv: Fix memory leak in module_frob_arch_sections()
riscv: ptdump: use seq_puts() in pt_dump_seq_puts() macro
riscv: stacktrace: Disable KASAN checks for non-current tasks
On virtualized PowerPC (pseries) systems, where only one polling state
(Snooze) and one deep state (CEDE) are available, selecting CEDE when
the predicted idle duration is less than the target residency of CEDE
state can hurt performance. In such cases, the entry/exit overhead of
CEDE outweighs the power savings, leading to unnecessary state
transitions and higher latency.
Menu governor currently contains a special-case rule that prioritizes
the first non-polling state over polling, even when its target residency
is much longer than the predicted idle duration. On PowerPC/pseries,
where the gap between the polling state (Snooze) and the first non-polling
state (CEDE) is large, this behavior causes performance regressions.
Refine that special case by adding an extra requirement: the first
non-polling state can only be chosen if its target residency is below
the defined RESIDENCY_THRESHOLD_NS. If this condition is not satisfied,
polling is allowed instead, avoiding suboptimal non-polling state
entries.
This change is limited to the single special-case rule for the first
non-polling state. The general non-polling state selection logic in the
menu governor remains unchanged.
Performance improvement observed with pgbench on PowerPC (pseries)
system:
+---------------------------+------------+------------+------------+
| Metric | Baseline | Patched | Change (%) |
+---------------------------+------------+------------+------------+
| Transactions/sec (TPS) | 495,210 | 536,982 | +8.45% |
| Avg latency (ms) | 0.163 | 0.150 | -7.98% |
+---------------------------+------------+------------+------------+
CPUIdle state usage:
+--------------+--------------+-------------+
| Metric | Baseline | Patched |
+--------------+--------------+-------------+
| Total usage | 12,735,820 | 13,918,442 |
| Above usage | 11,401,520 | 1,598,210 |
| Below usage | 20,145 | 702,395 |
+--------------+--------------+-------------+
Above/Total and Below/Total usage percentages:
+------------------------+-----------+---------+
| Metric | Baseline | Patched |
+------------------------+-----------+---------+
| Above % (Above/Total) | 89.56% | 11.49% |
| Below % (Below/Total) | 0.16% | 5.05% |
| Total cpuidle miss (%) | 89.72% | 16.54% |
+------------------------+-----------+---------+
The results indicate that restricting CEDE selection to cases where
its residency matches the predicted idle time reduces mispredictions,
lowers unnecessary state transitions, and improves overall throughput.
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
[ rjw: Changelog edits, rebase ]
Link: https://patch.msgid.link/20251006013954.17972-1-aboorvad@linux.ibm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A throughput regression of 11% introduced by commit 779b1a1cb1 ("cpuidle:
governors: menu: Avoid selecting states with too much latency") has been
reported and it is related to the case when the menu governor checks if
selecting a proper idle state instead of a polling one makes sense.
In particular, it is questionable to do so if the exit latency of the
idle state in question exceeds the predicted idle duration, so add a
check for that, which is sufficient to make the reported regression go
away, and update the related code comment accordingly.
Fixes: 779b1a1cb1 ("cpuidle: governors: menu: Avoid selecting states with too much latency")
Closes: https://lore.kernel.org/linux-pm/004501dc43c9$ec8aa930$c59ffb90$@telus.net/
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/12786727.O9o76ZdvQC@rafael.j.wysocki
It is reported that commit 85975daeaa ("cpuidle: menu: Avoid discarding
useful information") led to a performance regression on Intel Jasper Lake
systems because it reduced the time spent by CPUs in idle state C7 which
is correlated to the maximum frequency the CPUs can get to because of an
average running power limit [1].
Before that commit, get_typical_interval() would have returned UINT_MAX
whenever it had been unable to make a high-confidence prediction which
had led to selecting the deepest available idle state too often and
both power and performance had been inadequate as a result of that on
some systems. However, this had not been a problem on systems with
relatively aggressive average running power limits, like the Jasper Lake
systems in question, because on those systems it was compensated by the
ability to run CPUs faster.
It was addressed by causing get_typical_interval() to return a number
based on the recent idle duration information available to it even if it
could not make a high-confidence prediction, but that clearly did not
take the possible correlation between idle power and available CPU
capacity into account.
For this reason, revert most of the changes made by commit 85975daeaa,
except for one cosmetic cleanup, and add a comment explaining the
rationale for returning UINT_MAX from get_typical_interval() when it
is unable to make a high-confidence prediction.
Fixes: 85975daeaa ("cpuidle: menu: Avoid discarding useful information")
Closes: https://lore.kernel.org/linux-pm/36iykr223vmcfsoysexug6s274nq2oimcu55ybn6ww4il3g3cv@cohflgdbpnq7/ [1]
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3663603.iIbC2pHGDl@rafael.j.wysocki
Refuse to register a cpuidle device if the given CPU has a cpuidle
device already and print a message regarding it.
Without this, an attempt to register a new cpuidle device without
unregistering the existing one leads to the removal of the existing
cpuidle device without removing its sysfs interface.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ->show() callbacks in sysfs should use sysfs_emit() or
sysfs_emit_at() when formatting values for user space.
These helpers are the recommended way to ensure correct buffer
handling and consistency across the kernel.
See Documentation/filesystems/sysfs.rst for details.
No functional change intended.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Vivek Yadav <vivekyadav1207731111@gmail.com>
Link: https://patch.msgid.link/20250919165657.233349-1-vivekyadav1207731111@gmail.com
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the unnecessary initialisations of the platform device and driver
data pointers which are assigned on first use when registering the
cpuidle device during probe.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reduce the indentation level in the main loop of menu_select() by
rearranging some checks and assignments in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2389215.ElGaqSPkdT@rafael.j.wysocki
Occasionally, the exit latency of the idle state selected by the menu
governor may exceed the PM QoS CPU wakeup latency limit. Namely, if the
scheduler tick has been stopped already and predicted_ns is greater than
the tick period length, the governor may return an idle state whose exit
latency exceeds latency_req because that decision is made before
checking the current idle state's exit latency.
For instance, say that there are 3 idle states, 0, 1, and 2. For idle
states 0 and 1, the exit latency is equal to the target residency and
the values are 0 and 5 us, respectively. State 2 is deeper and has the
exit latency and target residency of 200 us and 2 ms (which is greater
than the tick period length), respectively.
Say that predicted_ns is equal to TICK_NSEC and the PM QoS latency
limit is 20 us. After the first two iterations of the main loop in
menu_select(), idx becomes 1 and in the third iteration of it the target
residency of the current state (state 2) is greater than predicted_ns.
State 2 is not a polling one and predicted_ns is not less than TICK_NSEC,
so the check on whether or not the tick has been stopped is done. Say
that the tick has been stopped already and there are no imminent timers
(that is, delta_tick is greater than the target residency of state 2).
In that case, idx becomes 2 and it is returned immediately, but the exit
latency of state 2 exceeds the latency limit.
Address this issue by modifying the code to compare the exit latency of
the current idle state (idle state i) with the latency limit before
comparing its target residency with predicted_ns, which allows one
more exit_latency_ns check that becomes redundant to be dropped.
However, after the above change, latency_req cannot take the predicted_ns
value any more, which takes place after commit 38f83090f5 ("cpuidle:
menu: Remove iowait influence"), because it may cause a polling state
to be returned prematurely.
In the context of the previous example say that predicted_ns is 3000 and
the PM QoS latency limit is still 20 us. Additionally, say that idle
state 0 is a polling one. Moving the exit_latency_ns check before the
target_residency_ns one causes the loop to terminate in the second
iteration, before the target_residency_ns check, so idle state 0 will be
returned even though previously state 1 would be returned if there were
no imminent timers.
For this reason, remove the assignment of the predicted_ns value to
latency_req from the code.
Fixes: 5ef499cd57 ("cpuidle: menu: Handle stopped tick more aggressively")
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5043159.31r3eYUQgx@rafael.j.wysocki
Marc has reported that commit 85975daeaa ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Fixes: 85975daeaa ("cpuidle: menu: Avoid discarding useful information")
Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1]
Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for pre-booted cores
-----BEGIN PGP SIGNATURE-----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=9SL+
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the device
suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
=xVF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
Merge the pmdomain fixes for v6.16-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently cpu hotplug with the PREEMPT_RT option set in the kernel is
not supported because the underlying generic power domain functions
used in the cpu hotplug callbacks are incompatible from a lock point
of view. This situation prevents the suspend to idle to reach the
deepest idle state for the "cluster" as identified in the
undermentioned commit.
Use the compatible ones when PREEMPT_RT is enabled and remove the
boolean disabling the hotplug callbacks with this option.
With this change the platform can reach the deepest idle state
allowing at suspend time to consume less power.
Tested-on Lenovo T14s with the following script:
echo 0 > /sys/devices/system/cpu/cpu3/online
BEFORE=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }') ;
rtcwake -s 1 -m mem;
AFTER=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }');
if [ $BEFORE -lt $AFTER ]; then
echo "Test successful"
else
echo "Test failed"
fi
echo 1 > /sys/devices/system/cpu/cpu3/online
Fixes: 1c4b2932bd ("cpuidle: psci: Enable the hierarchical topology for s2idle on PREEMPT_RT")
Cc: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709154728.733920-1-daniel.lezcano@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The function opencodes the for_each_cpu_from() by using an open for-loop.
Fix that in sake of readability.
While there, drop the 'valid' variable as it's pretty useless here.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Link: https://patch.msgid.link/20250604213908.27819-1-yury.norov@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The recent updates to the genpd core, can entirely manage the sync_state
support for the cpuidle-riscv-sbi-domain. More precisely, genpd prevents
our ->power_off() callback from being invoked, until all of our consumers
are ready for it.
Let's therefore drop the sync_state support for the
cpuidle-riscv-sbi-domain as it has become redundant.
Cc: Anup Patel <anup@brainfault.org>
Cc: linux-riscv@lists.infradead.org
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Reviewed-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-25-ulf.hansson@linaro.org
The recent updates to the genpd core, can entirely manage the sync_state
support for the cpuidle-psci-domain. More precisely, genpd prevents our
->power_off() callback from being invoked, until all of our consumers are
ready for it.
Let's therefore drop the sync_state support for the cpuidle-psci-domain as
it has become redundant.
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-24-ulf.hansson@linaro.org
The riscv-sbi-domain implements its own specific ->sync_state() callback.
Let's set the GENPD_FLAG_NO_SYNC_STATE to inform genpd about it.
Moreover, let's call of_genpd_sync_state() to make sure genpd tries to
power off unused PM domains.
Cc: Anup Patel <anup@brainfault.org>
Cc: linux-riscv@lists.infradead.org
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-12-ulf.hansson@linaro.org
The cpuidle-psci-domain implements its own specific ->sync_state()
callback. Let's set the GENPD_FLAG_NO_SYNC_STATE to inform genpd about it.
Moreover, let's call of_genpd_sync_state() to make sure genpd tries to
power off unused PM domains.
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-11-ulf.hansson@linaro.org
Fix an issue in the PSCI cpuidle driver introduced recently and a nasty
x86 power regression introduced in 6.15:
- Prevent freeing an uninitialized pointer in error path of
dt_idle_state_present() in the PSCI cpuidle driver (Dan Carpenter).
- Revert an x86 commit that went into 6.15 and caused idle power,
including power in suspend-to-idle, to rise rather dramatically on
systems booting with "nosmt" in the kernel command line (Rafael Wysocki).
* pm-cpuidle:
Revert "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
cpuidle: psci: Fix uninitialized variable in dt_idle_state_present()
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian).
- Fix typos in energy model documentation and example driver code (Moon
Hee Lee, Atul Kumar Pant).
- Rearrange the energy model management code and add a new function for
adjusting a CPU energy model after adjusting the capacity of the
given CPU to it (Rafael Wysocki).
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- Switch OPP to use kmemdup_array() (Zhang Enpei).
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
=dIqJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
If the first cpu_node = of_cpu_device_node_get() fails then the cleanup.h
code will try to free "state_node" but it hasn't been initialized yet.
Declare the device_nodes where they are initialized to fix this.
Fixes: 5836ebeb4a ("cpuidle: psci: Avoid initializing faux device if no DT idle states are present")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRcfU8O8sez1x7@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit af5376a77e ("cpuidle: psci: Transition to the faux device interface")
transitioned the PSCI cpuidle driver from using a platform device to the
faux device framework. However, unlike platform devices, the faux device
infrastructure logs an error when the probe function fails, even if the
failure is intentional or expected.
To prevent unnecessary error logs, we can skip creating the faux device
entirely if there are no PSCI idle states defined in the device tree.
Introduce a check for DT idle states during initialization and avoid
setting up the device if none are found.
This ensures cleaner logs and avoids misleading probe failure messages
when PSCI idle support is intentionally not described in DT.
Fixes: af5376a77e ("cpuidle: psci: Transition to the faux device interface")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/cf4e70e4-9fe5-4697-8744-8c12c41b5ff9@nvidia.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250502140119.2578909-1-sudeep.holla@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When trying to enter a domain-idlestate, we may occasionally fail to enter
the state, which is informed to us by psci_cpu_suspend_enter() returning an
error-code. In these cases, our corresponding genpd->power_off() callback
has already returned zero to indicate success, leading to getting
in-correct domain-idlestate statistics in debugfs for the genpd in
question.
Let's fix this by making use of the new pm_genpd_inc_rejected() helper, as
it allows us to correct the domain-idlestate statistics for this type of
scenario.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250314100103.1294715-4-ulf.hansson@linaro.org
To prepare to extend the per CPU variable domain_state to include more
data, let's move it into a struct. A subsequent change will add the new
data. This change have no intended functional impact.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250314100103.1294715-3-ulf.hansson@linaro.org
The PSCI cpuidle driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the
driver was first implemented.
With the introduction of the lightweight faux device interface, we now
have a more appropriate alternative. Migrate the driver to utilize the
faux bus, given that the platform device it previously created was not
a real one anyway. This will simplify the code, reducing its footprint
while maintaining functionality.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250317-plat2faux_dev-v1-1-5fe67c085ad5@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds