-----BEGIN PGP SIGNATURE-----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=qSzr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
- Add a struct pci_ops.assert_perst() function pointer to assert/deassert
PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya
Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch,
which must be held in reset after poweron so the pwrctrl driver can
configure the switch via I2C before bringing up the links (Krishna
Chaitanya Chundru)
* pci/pwrctrl-tc9563:
PCI: pwrctrl: Add power control driver for TC9563
PCI: qcom: Implement .assert_perst()
PCI: dwc: Implement .assert_perst() for dwc glue drivers
PCI: Add .assert_perst() to control PCIe PERST#
dt-bindings: PCI: Add binding for Toshiba TC9563 PCIe switch
- Fix a race between link training and endpoint register initialization
(Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
- Add #includes to avoid depending on 'proxy' headers (Andy Shevchenko)
* pci/controller/stm32:
PCI: stm32: Don't use 'proxy' headers
PCI: stm32: Fix EP page_size alignment
PCI: stm32: Fix LTSSM EP race with start link
- Add module support for platform controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)
- Add DT binding and driver for CIX Sky1 (Hans Zhang)
* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver
- Drop ARM dependency so we can build test on other arches (Geert
Uytterhoeven)
* pci/controller/rcar-gen2:
PCI: rcar-gen2: Drop ARM dependency from PCI_RCAR_GEN2
- Look up OPP using both frequency and data rate (not just frequency) so
RPMh votes can account for both (Krishna Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Use frequency and level based OPP lookup
- Update DT binding to name DBI region "dbi", not "elbi", and update driver
to support both (Manivannan Sadhasivam)
* pci/controller/meson:
PCI: meson: Fix parsing the DBI register region
dt-bindings: PCI: amlogic: Fix the register name of the DBI region
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian Marangi)
* pci/controller/mediatek:
PCI: mediatek: Add support for Airoha AN7583 SoC
PCI: mediatek: Use generic MACRO for TPVPERL delay
PCI: mediatek: Convert bool to single quirks entry and bitmap
dt-bindings: PCI: mediatek: Add support for Airoha AN7583
dt-bindings: PCI: mediatek: Convert to YAML schema
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Add support to build as a loadable module
PCI: dwc: Export dw_pcie_allocate_domains() and dw_pcie_ep_raise_msix_irq()
PCI: Export pci_get_host_bridge_device() for use by pci-keystone
PCI: keystone: Exit ks_pcie_probe() for invalid mode
- Use devm_clk_get_optional_enabled() instead of open-coding
devm_clk_get_optional() and clk_prepare_enable() (Anand Moon)
* pci/controller/j721e:
PCI: j721e: Use 'pcie->reset_gpio' directly and drop the local variable
PCI: j721e: Use devm_clk_get_optional_enabled() to get and enable the clock
- Guard ARM32-specific hook_fault_code() with ifdefs so we can build test
on other arches (Bjorn Helgaas)
* pci/controller/ixp4xx:
PCI: ixp4xx: Guard ARM32-specific hook_fault_code()
- Update PORT_LOGIC_LTSSM_STATE_MASK to be a 6-bit mask as per spec, not a
5-bit mask (Shawn Lin)
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver says
it's supported, which prevents users from enabling non-working L1SS.
Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas)
- Configure L1SS support in dw-rockchip when DT says 'supports-clkreq'
(Shawn Lin)
* pci/controller/dwc:
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
PCI: dwc: Advertise L1 PM Substates only if driver requests it
PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe caused an
unrecoverable abort (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Add panic/die handler to driver
PCI: brcmstb: Add a way to indicate if PCIe bridge is active
PCI: brcmstb: Fix disabling L0s capability
Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based on the
Cadence High Performance Architecture (HPA) PCIe core.
The controller supports MSI/MSI-X via GICv3, Single Virtual Channel, and
Single Function.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
[mani: moved the PCI ID definitions and squashed Kconfig change]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: sort Kconfig menu entry, squash
https://lore.kernel.org/r/aSBqp0cglr-Sc8na@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-8-hans.zhang@cixtech.com
Add register and bitfield definitions:
- GEN3_RELATED_OFF_EQ_PHASE_2_3 field of GEN3_RELATED_OFF
- Coherency control registers
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-3-vincent.guittot@linaro.org
- Remove one variant of PCI/MSI management as all users have been
converted to use per device domains. That reduces the variants to two:
The modern and the real archaic legacy variant, which keeps the usual
suspects in the museum category alive.
- Rework the platform MSI device ID detection mechanism in the ARM GIC
world to address resource leaks, duplicated code and other details. This
requires a corresponding preparatory step in the PCI/iproc driver.
- Trivial core code cleanups
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmkswn0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoYpuD/wKT7d6I6AqnJVF/RhiJ+/d6vuX/aFW
g6E7XAkMLKhmxunSNFfPzXsHy2a0oJroYKmDJH4C8GWGo/gXa+QvmDt2491k9rdV
zM+CBodBu3/bXWvTW+o1fbyAvG+p2C3+iSRW/gGqzPdcY8gQiRnNOZS1j7zusMjO
A6pz5SvLSPWQUnVl9PygJBuNX5TFHPnY3AySRpW11CvqB5/8gqGz+O6lT/Q+5hov
GUC57hskbQd1PsYhTNRaUR4z7VMolPHqscp8DYVCWjOMP/r5quC6dlsn91yxuATU
8D7oRiW8xkCaTJplY/rA6r/VxUthZ3EgIxzev3rGaWBdPxHcFfftf2oxyFFAf3lf
3rEdfGBcNgApx+MCcoT5/3mf3KJfn2/bE6bZhwv94+dtbTlHguztyMD3vnGTS73i
zPWQ5ae4M5sqc8kCNMRaBfU8yQEHEKs3gia67vStZyn5R/uUNVKRo67LBPZKVDcJ
2511Ylnm62yG6PtdPGIFHY1i75uPpxXuS7F0BJignzM3iPvVvwLPZLDORr3/pR4q
CmswZTA2obue6+nwz/LUacxzONsZ2Z8pzGY6rrT9sfj0Z4mk6xrfEPfjfmVoMpyk
Dk4B8lIVYwcR7d/Sw+FIwYst8iw+L77Yn7kN8yCbh4lAOxBUUvtS5KAP6uPGe3D1
30Q/DbBVlEvg/g==
=VAtQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for [PCI] MSI related code:
- Remove one variant of PCI/MSI management as all users have been
converted to use per device domains. That reduces the variants to
two:
The modern and the real archaic legacy variant, which keeps the
usual suspects in the museum category alive.
- Rework the platform MSI device ID detection mechanism in the ARM
GIC world to address resource leaks, duplicated code and other
details. This requires a corresponding preparatory step in the
PCI/iproc driver.
- Trivial core code cleanups"
* tag 'irq-msi-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-its: Rework platform MSI deviceID detection
PCI: iproc: Implement MSI controller node detection with of_msi_xlate()
genirq/msi: Slightly simplify msi_domain_alloc()
PCI/MSI: Delete pci_msi_create_irq_domain()
The Renesas RZ/G3S features a PCIe IP that complies with the PCI Express
Base Specification 4.0 and supports speeds of up to 5 GT/s. It functions
only as a root complex, with a single-lane (x1) configuration. The
controller includes Type 1 configuration registers, as well as IP
specific registers (called AXI registers) required for various adjustments.
Hardware manual can be downloaded from the address in the "Link" section.
The following steps should be followed to access the manual:
1/ Click the "User Manual" button
2/ Click "Confirm"; this will start downloading an archive
3/ Open the downloaded archive
4/ Navigate to r01uh1014ej*-rzg3s-users-manual-hardware -> Deliverables
5/ Open the file r01uh1014ej*-rzg3s.pdf
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://www.renesas.com/en/products/rz-g3s?queryID=695cc067c2d89e3f271d43656ede4d12
Link: https://patch.msgid.link/20251119143523.977085-3-claudiu.beznea.uj@bp.renesas.com
Having the host bridge allocation inside pci_host_common_init() results
in a lot of complexity in the pcie-apple driver (the only direct user
of this function outside of core PCI code).
It forces the allocation of driver-specific tracking structures outside
of the bridge allocation, which in turn requires it to use inefficient
data structures to match the bridge and the private structure as needed.
Instead, let the bridge structure be passed to pci_host_common_init(),
allowing the driver to allocate it together with the private data,
as it is usually intended. The driver can then retrieve the bridge
via the owning device attached to the PCI config window structure.
This allows the pcie-apple driver to be significantly simplified.
Both core and driver code are changed in one go to avoid going via
a transitional interface.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/86jyzms036.wl-maz@kernel.org
Link: https://patch.msgid.link/20251125102726.865617-1-maz@kernel.org
L1 PM Substates for RC mode require support in the dw-rockchip driver
including proper handling of the CLKREQ# sideband signal. It is mostly
handled by hardware, but software still needs to set the clkreq fields
in the PCIE_CLIENT_POWER_CON register to match the hardware implementation.
For more details, see section '18.6.6.4 L1 Substate' in the RK3568 TRM 1.1
Part 2, or section '11.6.6.4 L1 Substate' in the RK3588 TRM 1.0 Part2.
[bhelgaas: set pci->l1ss_support so DWC core preserves L1SS Capability bits;
drop corresponding code here, include updates from
https://lore.kernel.org/r/aRRG8wv13HxOCqgA@ryzen]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1761187883-150120-1-git-send-email-shawn.lin@rock-chips.com
Link: https://patch.msgid.link/20251118214312.2598220-4-helgaas@kernel.org
The DWC core clears the L1 Substates Supported bits unless the driver sets
the "dw_pcie.l1ss_support" flag.
The tegra194 init_host_aspm() sets "dw_pcie.l1ss_support" if the platform
has the "supports-clkreq" DT property. If "supports-clkreq" is absent,
"dw_pcie.l1ss_support" is not set, and the DWC core will clear the L1
Substates Supported bits.
The tegra194 code to clear the L1 Substates Supported bits is unnecessary,
so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251118214312.2598220-3-helgaas@kernel.org
L1 PM Substates require the CLKREQ# signal and may also require
device-specific support. If CLKREQ# is not supported or driver support is
lacking, enabling L1.1 or L1.2 may cause errors when accessing devices,
e.g.,
nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
If the kernel is built with CONFIG_PCIEASPM_POWER_SUPERSAVE=y or users
enable L1.x via sysfs, users may trip over these errors even if L1
Substates haven't been enabled by firmware or the driver.
To prevent such errors, disable advertising the L1 PM Substates unless the
driver sets "dw_pcie.l1ss_support" to indicate that it knows CLKREQ# is
present and any device-specific configuration has been done.
Set "dw_pcie.l1ss_support" in tegra194 (if DT includes the
"supports-clkreq' property) and qcom (for cfg_2_7_0, cfg_1_9_0, cfg_1_34_0,
and cfg_sc8280xp controllers) so they can continue to use L1 Substates.
Based on Niklas's patch:
https://patch.msgid.link/20251017163252.598812-2-cassel@kernel.org
[bhelgaas: drop hiding for endpoints]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251118214312.2598220-2-helgaas@kernel.org
As per DesignWare Cores PCI Express Controller Databook, section 5.50,
SII: Debug Signals, cxpl_debug_info[63:0]:
[5:0] smlh_ltssm_state: LTSSM current state. Encoding is same as the
dedicated smlh_ltssm_state output.
The mask should be 6 bits, from 0 to 5. Hence, fix the mask definition.
Fixes: 23fe5bd4be ("PCI: keystone: Cleanup ks_pcie_link_up()")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1763122140-203068-1-git-send-email-shawn.lin@rock-chips.com
The functionality implemented in the iproc driver in order to detect an
OF MSI controller node is now fully implemented in of_msi_xlate().
Replace the current msi-map/msi-parent parsing code with of_msi_xlate().
Since of_msi_xlate() is also a deviceID mapping API, pass in a fictitious
0 as deviceID - the driver only requires detecting the OF MSI controller
node not the deviceID mapping per-se (of_msi_xlate() return value is
ignored for the same reason).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251021124103.198419-5-lpieralisi@kernel.org
Add support for assert_perst() for switches like TC9563, which require
configuration before the PCIe link is established. Such devices use this
function op to assert PERST# before configuring the device and once the
configuration is done they de-assert PERST#.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-tc9563-v9-5-de3429f7787a@oss.qualcomm.com
Update header inclusions to follow IWYU (Include What You Use)
principle.
In particular, replace of_gpio.h, which is subject to removal by the
GPIOLIB subsystem, with the respective headers that are being used by the
driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251114185534.3287497-1-andriy.shevchenko@linux.intel.com
pci_epc_mem_alloc_addr() allocates a CPU address from the ATU window phys
base and a page number. Set the ep->page_size so the resulting CPU address
is correctly aligned with the ATU required alignment.
Fixes: 151f3d29ba ("PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251114-atu_align_ep-v1-1-88da5366fa04@foss.st.com
If the host has deasserted PERST# and started link training before the link
is started on EP side, enabling LTSSM before the endpoint registers are
initialized in the perst_irq handler results in probing incorrect values.
Thus, wait for the PERST# level-triggered interrupt to start link training
at the end of initialization and cleanup the stm32_pcie_[start stop]_link
functions.
Fixes: 151f3d29ba ("PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: wrap line]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251114-perst_ep-v1-1-e7976317a890@foss.st.com
Introduce a driver for the PCIe host controller found in the SpacemiT K1
SoC. The hardware is derived from the Synopsys DesignWare PCIe IP. The
driver supports up to three PCIe ports operating at PCIe link speed up to
5 GT/s. The first port uses a combo PHY, which may be configured for use
for USB3 instead.
Signed-off-by: Alex Elder <elder@riscstar.com>
[mani: added FIXME to the comment on disabling ASPM L1]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Jason Montleon <jmontleo@redhat.com>
Tested-by: Johannes Erdfelt <johannes@erdfelt.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://patch.msgid.link/20251113214540.2623070-6-elder@riscstar.com
Move the Cadence PCIe controller RP common functions into a separate file.
The common library functions are split from legacy PCIe RP controller
functions to a separate file.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
[mani: removed the unused variable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-4-hans.zhang@cixtech.com
Split the Cadence PCIe header file by moving the Legacy (LGA) controller
register definitions to a separate header file for support of next
generation PCIe controller architecture.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-3-hans.zhang@cixtech.com
Use devm_clk_get_optional_enabled() helper instead of calling
devm_clk_get_optional() and then clk_prepare_enable().
Assign the result of devm_clk_get_optional_enabled() directly to
pcie->refclk to avoid using a local 'clk' variable.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251028154229.6774-2-linux.amoon@gmail.com
The 'pci-keystone.c' driver is the application/glue/wrapper driver for the
Designware PCIe Controllers on TI SoCs. Now that all of the helper APIs
that the 'pci-keystone.c' driver depends upon have been exported for use,
enable support to build the driver as a loadable module.
When building the driver as a module, the functions marked by the '__init'
keyword may be invoked after the init memory has been freed by the kernel.
This results will result in an exception of the form:
Unable to handle kernel paging request at virtual address ...
Mem abort info:
...
pc : ks_pcie_host_init+0x0/0x540
lr : dw_pcie_host_init+0x170/0x498
...
ks_pcie_host_init+0x0/0x540 (P)
ks_pcie_probe+0x728/0x84c
platform_probe+0x5c/0x98
really_probe+0xbc/0x29c
__driver_probe_device+0x78/0x12c
driver_probe_device+0xd8/0x15c
To address this, introduce a new function namely 'ks_pcie_init()' to
register the 'fault handler' while removing the '__init' keyword from
existing functions.
Note that hook_fault_code() is defined as '__init' function. Since the init
functions should never be called during runtime (after init memory freeing
stage), the driver is made as a built-in if CONFIG_ARM (where
hook_fault_code() is used) is selected.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[mani: added a note about hook_fault_code()]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-5-s-vadapalli@ti.com
The pci-keystone.c driver uses the functions 'dw_pcie_allocate_domains()'
and 'dw_pcie_ep_raise_msix_irq()'. Export them in preparation for enabling
the pci-keystone.c driver to be built as a loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-3-s-vadapalli@ti.com
Commit under Fixes introduced support for PCIe EP mode on AM654x platforms.
When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE",
the PCIe Controller is configured accordingly. However, when the mode is
neither of them, an error message is displayed, but the driver probe
succeeds. Since this "invalid" mode is not associated with a functional
PCIe Controller, the probe should fail.
Fix the behavior by exiting "ks_pcie_probe()" with the return value of
"-EINVAL" in addition to displaying the existing error message when the
mode is invalid.
Fixes: 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com
Most PCIe HW returns 0xffffffff for failed reads on PCIe, but by default
Broadcom's STB PCIe controller effects an abort. Some SoCs -- 7216 and its
descendants -- have new HW that identifies error details.
Add a simple handler to print diagnostic info in case the PCIe controller
was the cause of the abort. Unfortunately, an abort still occurs.
Read the error registers only when the PCIe bridge is active and the PCIe
registers are accessible. Otherwise, a "die" event caused by something
other than PCIe could cause an abort if the PCIe "die" handler tried to
access registers when the bridge is off.
Example error output:
brcm-pcie 8b20000.pcie: Error: Mem Acc: 32bit, read, @0x38000000
brcm-pcie 8b20000.pcie: Type: TO=0 Abt=0 UnspReq=1 AccDsble=0 BadAddr=0
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251029193616.3670003-3-james.quinlan@broadcom.com
In a future commit, a new handler will be introduced that in part does
reads and writes to some of the PCIe registers. When this handler is
invoked, it is paramount that it does not do these register accesses when
the PCIe bridge is inactive, as this will cause CPU abort errors.
To solve this we keep a spinlock that guards a variable which indicates
whether the bridge is on or off. When the bridge is on, access of the PCIe
HW registers may proceed.
Since there are multiple ways to reset the bridge, we introduce a general
function to obtain the spinlock, call the specific function that is used
for the specific SoC, sets the bridge active indicator variable, and
releases the spinlock.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251029193616.3670003-2-james.quinlan@broadcom.com
First of all, the driver was parsing the 'dbi' register region as 'elbi'.
This was due to DT mistakenly passing 'dbi' as 'elbi'. Since the DT is
now fixed to supply 'dbi' region, this driver can rely on the DWC core
driver to parse and map it.
However, to support the old DTs, if the 'elbi' region is found in DT, parse
and map the region as both 'dw_pcie::elbi_base' as 'dw_pcie::dbi_base'.
This will allow the driver to work with both broken and fixed DTs.
Also, skip parsing the 'elbi' region in DWC core if 'pci->elbi_base' was
already populated.
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Fixes: c96992a24b ("PCI: dwc: Add support for ELBI resource mapping")
Reported-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Closes: https://lore.kernel.org/linux-pci/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Bananapi-M2S
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org # 6.2
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-3-c50dcc56ed6a@oss.qualcomm.com
-----BEGIN PGP SIGNATURE-----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=fYnS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
Claudiu Beznea