Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Now that the full class driver is in place we can add support to the
Intel machine driver for Cirrus's new SDCA audio CODEC the cs42l45. This
makes some minor tweaks to the machine driver itself to support SDCA
devices, and then adds the necessary tables etc. to define the device.
Note, this series shouldn't have any dependencies on the other series of
improvements to the class driver that is already on the list. So either
can be merged first.
Add support for the Cirrus Logic CS42L45 standalone using SoundWire.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the helper functions into the machine driver for the cs42l45,
this will register a jack for jack detection and add things into
to the components string if they are needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the sof_sdw machine driver assumes that all devices involved
in the sound card are connected through a DAI link. However for SDCA
devices we still want the HID (Human Interface Device, used for jack
buttons) to be part of the sound card, but it contains no DAI links.
Add support into the machine driver to specify a list of auxiliary
devices to merged into the card.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As SDCA devices will support each DAI link on a different child device,
move the codec name from codec_info to each dai_info. To allow the
appropriate function device to be bound to each DAI link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The assumption so far is that all the DAI links for a given audio part
would be on the same device. However, as SDCA implements each audio
function on a separate auxiliary driver this will no longer be true.
This means it is necessary to add additional codec_conf structures to
get the prefix for an audio part to apply to all the auxiliary drivers
that make up that part.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been some complaints around the UCM files for SDCA
devices that the control system is quite hard to follow. This is
definitely true without the specification handy the naming can be
a little cryptic. However, as most of the information is parsed
from DisCo there are some limits to what the driver can safely do
to improve this.
However, one area that can be improved is the non-streaming
input/output terminals. These have a field (enum sdca_terminal_type)
that describes the usage of that terminal. These types can be
appended to the entity name to give the users a better clue as
to the purpose. For example "OT 43", would now become "OT 43
Headphone". This would follow through into the jack controls which
would change from "OT 43 Jack" to "OT 43 Headphone Jack", making the
purpose much more obvious to the user.
This provides slightly more readable controls without relying on
implicit knowledge that individual parts might not conform to.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently mute controls will be called "FU xx Mute Switch" (note
the switch is added programmatically outside the coverage of this
patch) and the accompanying volume control would be called "FU xx
Channel Volume". These names are taken from the SDCA specification,
however, this does not mesh well with the ALSA naming system. ALSA
generally expects enables rather than mutes and expects that mutes
and volumes have matching names.
Update the names and invert the mute controls to make them more
standard "FU XX Channel Switch", this does slightly deviate from
the SDCA specification but it makes the rest of the Linux ecosystem
a lot happier.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the __free(kfree) cleanup to replace instances of manually
calling kfree(). Also make some code path simplifications that this
allows.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127155817.1374079-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even if something goes wrong when performing suspend on DSP, from the
system perspective the component is not critical enough to block the
suspend operation entirely. Leaving recovery to next resume() suffices.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
catpt_dai_pcm_new() is called during the bring up sequence of the
machine board device which is a different device to the parent (DSP)
device yet utilizes pm_runtime_xxx() against it in order to send IPCs.
If the parent's pm_runtime is not configured before that happens,
errors will occur.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b32 ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a number of interfaces available for manipulating instances of
struct resource. To improve readability, move away from manual editing
in favor of the common interface.
While at it, adjust spacing so that both code blocks, while found in
separate functions, looks cohesive.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Verify if the entire block is found within DRAM, not just
the start of it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small pile of driver specific fixes that came in during the past few
weeks, none of them especially major.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmknZy0ACgkQJNaLcl1U
h9BDAwf+L0M5MIc8w1F7+32G+SEkzhf/YBtscV7nNXGUW1BNFQa2kjEXezC65cXe
3S2qxTgtksMzt4J9LfDPozb0sXNKvjUK2v4k8rBiIxWzN0HJYDbq7OvzvwmLGZhK
UYfE1a/PAuckZ5mQG7v5E3ZbeMAC9hfiyKVM3mYfc/Hn6g7WkJBFyuZdLtHPZLm2
iABRwVJoSkJwdJvvWr94xaJnOBrNfFqCfgLJdw+Sy2ugVhGEDZAjuj6xFsyh443h
5OL5Mtw7W7O26ffWIXbqweA1Gnw52htsyVlztih60a9/wG2LAlQGcihUYmrnf4Yr
iXQwjCt6T6/O2bdzDBRgwjKpme958Q==
=Z4Wm
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A small pile of driver specific fixes that came in during the past few
weeks, none of them especially major.
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
Smatch complains that the call to snd_soc_component_get_drvdata(component)
will dereference "component" so this NULL check is too late. The probe()
function will never be called with a NULL component pointer so just
delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aScUKqCEhSIZoOmg@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ALSA SoC driver for Tegra runs also on SoCs without the Tegra20 APB DMA
controller (e.g. Tegra234).
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126112926.4126757-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b99 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Thunderbolt Dock G2 includes a headset jack with support for
jack detection. However, this being a UAC1 device, detection is
implemented via vendor-defined URB Controls.
Implement it in a similar way to the Dell WD15/19 docks, but with
different commands.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://patch.msgid.link/20251126003805.2705503-3-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modify the realtek_add_jack function used for the jack detection quirk
to allow passing the mixer unit id and an snd_kcontrol_new.
This allows adding additional devices that require the same quirk, but
implement jack detection with different commands.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://patch.msgid.link/20251126003805.2705503-2-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
My laptop, HP ProBook 450 G8 (32M40EA), has Realtek ALC236 codec on its
integrated sound card, and uses GPIO pins 0x2 and 0x1 for speaker mute
and mic mute LEDs correspondingly, as found out by me through hda-verb
invocations. This matches the GPIO masks used by the
alc236_fixup_hp_gpio_led() function.
PCI subsystem vendor and device IDs happen to be 0x103c and 0x8a75,
which has not been covered in the ALC2xx driver code yet.
Signed-off-by: Ilyas Gasanov <public@gsnoff.com>
Link: https://patch.msgid.link/20251125235441.53629-1-public@gsnoff.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use an error label for deregistering also the PCM DMA for consistency.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reference taken to the sync provider OF node when probing the
platform device is currently only dropped if the set_sync() callback
fails during DAI probe.
Make sure to drop the reference on platform probe failures (e.g. probe
deferral) and on driver unbind.
This also avoids a potential use-after-free in case the DAI is ever
reprobed without first rebinding the platform driver.
Fixes: 5914d285f6 ("ASoC: stm32: sai: Add synchronization support")
Fixes: d4180b4c02 ("ASoC: stm32: sai: fix set_sync service")
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: stable@vger.kernel.org # 4.16: d4180b4c02
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to unprepare the parent clock also on probe failures (e.g.
probe deferral).
Fixes: a14bf98c04 ("ASoC: stm32: sai: fix possible circular locking")
Cc: stable@vger.kernel.org # 5.5
Cc: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to drop the reference taken when looking up the sync provider
device and its driver data during DAI probe on probe failures and on
unbind.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 7dd0d83558 ("ASoC: stm32: sai: simplify sync modes management")
Fixes: 1c3816a194 ("ASoC: stm32: sai: add missing put_device()")
Cc: stable@vger.kernel.org # 4.16: 1c3816a194
Cc: olivier moysan <olivier.moysan@st.com>
Cc: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sdca_dev_register() function never returns NULL, it returns error
pointers on error. Fix the error checking to match.
Fixes: 4496d1c65b ("ASoC: SDCA: add function devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/aSW1UOgMCiQIaZG8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to
UAC3 values") usb-audio is using UAC3_CLOCK_SOURCE instead of
bDescriptorSubtype, later refactored with e0ccdef926 ("ALSA: usb-audio:
Clean up check_input_term()") into parse_term_uac2_clock_source().
This breaks the clock source selection for at least my
1397:0003 BEHRINGER International GmbH FCA610 Pro.
Fix by using UAC2_CLOCK_SOURCE in parse_term_uac2_clock_source().
Fixes: 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to UAC3 values")
Signed-off-by: René Rebe <rene@exactco.de>
Link: https://patch.msgid.link/20251125.154149.1121389544970412061.rene@exactco.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the Onkyo SE-300PCIE, a Creative X-Fi CA20K2-based
sound card with a custom hardware implementation that differs
significantly from other CA20K2-based variants.
Changes:
- PCI quirk entry for OK0010
- Port 0x3 is utilized for dedicated RCA output (configured as I2S)
- Modified GPIO pin mappings and states
- 4-channel simultaneous ADC input support for line and microphone
capture without input switching (similar to SB1270)
- Simplified ADC initialization (no manual setup required)
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-7-me@harin.net
Add feature to support switching between the dedicated RCA output and
the 7.1ch Front output. This is required for hardware that utilizes
separate DAC circuits for RCA and 7.1ch channels.
Changes:
- Add dedicated_rca capability flag
- Add "Analog Playback Route" mixer control
- Implement logic to swap DAO inputs between RCA and Front ports
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-6-me@harin.net
Refactor atc_get_resources(), atc_connect_resources(), and
atc_release_resources() to allocate resources based on maximum type
definitions.
This allows specific resources to be conditionally skipped based on
capabilities. This is necessary for hardware variants where resource
allocations do not follow a sequential order.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-5-me@harin.net
Replace the index-based type check with an explicit output flag in
struct daio and struct daio_desc.
This allows handling DAIO resource types correctly regardless of their
index. This is necessary for hardware variants where resource types do
not follow a sequential order.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-4-me@harin.net
Add helper functions hw_adc_stop(), hw_adc_start(), and hw_adc_reset()
to encapsulate ADC reset sequence operations. These functions reduce
duplication by centralizing the GPIO-based ADC control logic.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-3-me@harin.net
Add a hw parameter to the daio_mgr_dao_init() function to provide
access to model-specific information. This is necessary for proper
configuration of S/PDIF and I2S output ports on different hardware
variants.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-2-me@harin.net
The maxpacksize field in struct audioformat represents the maximum number
of bytes per isochronous interval. The current implementation only
special-cases high-speed endpoints and does not account for the different
computations required for SuperSpeed, SuperSpeedPlus, or eUSB2. As a
result, USB audio class devices operating at these speeds may fail to
stream correctly. The issue was observed on a MOTU 16A (2025) interface,
which requires more than 1024 bytes per interval at SuperSpeed.
This patch replaces the existing logic with a helper that computes the
correct maximum bytes-per-interval for all USB speeds, borrowing the logic
used in drivers/usb/core/urb.c.
Signed-off-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://patch.msgid.link/20251124210518.90054-1-dylan_robinson@motu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
KUnit automatically deactivates stubs when a test case exits, so there
is no need to explicitly call kunit_deactivate_static_stub() in every
test function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124162016.30446-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A wrong preiod at the end of the sentence was reported by one of my
customers. Their thorough code review is greatly appreciated.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20251121234427.402-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new variable of reset was added for TAS58XX on TAS5825 first.
And TAS5802/5815... was added later, so this reset variable check
should be changed to lowest chip of TAS58XX.
Fixes: 53a3c6e222 ("ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251124031542.2793-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The CAL_SET_STATUS and CAL_DATA_RB controls are volatile and read-only, but
the existing ASoC macros to define controls don't allow setting access
permissions, so those controls were marked as non-volatile read/write.
These four patches fix that.
The first two patches add two new control macros to soc.h. I really don't
like codec drivers open-coding a kcontrol_new content for a control that
will be managed by the ASoC info/get/put handlers. If a new type of ASoC
control definition is needed it's better to have it in soc.h so all the
dependencies between ASoC and the kcontrol_new content are in one place.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This series adds an initial SDCA class driver, this consists of a
primary driver attached to the SoundWire device, and auxiliary drivers
representing each of the functions of the SDCA device. These drivers all
use the APIs added over the past series's to provide the class
functionality, as such these final drivers themselves are quite thin.
Also a few fix ups at the start of the series that have gathered up
whilst the last SDCA series was in review.
WCD934x provides register read/write interface to soundwire controller via
slimbus. Eventhough there was no direct compile time dependency for
this so far, however after adding common wcd functions this dependency
became explict.
We can either move the soundwire specific bits from wcd-common to wcd-sdw.c or
something on those lines or explicity add this dependency in Kconfig.
Moving this wcd-sdw can fix reported compile issue but it does not make
sense to select this codec without soundwire configs.
Given the fact that WCD934x is very much providing soundwire functionality
it is better to specify the soundwire dependency explicity in Kconfig
which should also fix the below compile time error with combination
of wcd934x a built-in and soundwire a module and also allow this codec
selection only when soundwire is available.
Error log:
wcd-common.c:undefiined reference to `sdw_write'
sound/soc/codecs/wcd-common.o: in function `wcd_bus_config':
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511210405.zd9wig5Z-lkp@intel.com/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251121143258.229138-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the parsed ELD has spk_alloc=0, it currently assigns the parsed ELD
spk_alloc to 0xffff. However, we should also check if there is at least
one SAD (Short audio descriptor) to enforce the assumption, as ELD
without any sad_count, is usually considered invalid for e.g. in
commit ce9778b7a0272("ALSA: hda/hdmi: Consider ELD is invalid when no
SAD is present").
Signed-off-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20251120141757.901505-1-uajain@igalia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a driver to support the individual SDCA functions within the class
driver. Use the SDCA helpers to parse the DisCo information and register
a function driver based on those properties. Manage the boot of the
function, reset, FDL, defaults. Manage the function level register map.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-14-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a device level driver as the entry point for the class driver.
Additional auxiliary drivers will be registered to support each function
within the device. This driver will register those function drivers and
provide the device level functionality, such as monitoring bus
attach/detach, the device level register map, and the root for the IRQ
handling.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-13-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the auxiliary bus to register/unregister subdevices for each
function. Each function will be handled with a separate driver,
matched using a name.
If a vendor wants to override a specific function driver, they could
use a custom name to match with a custom function driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-12-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to write out the SDCA blind initialization writes.
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-11-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not uncommon for an SDCA Control to have no specified default
value in the DisCo. Non-volatile registers with no defaults will not be
present in the cache until they are accessed. However, if the first
operation user-space performs is a read whilst the device is runtime
suspended this read will fail.
To avoid such problems we should populate values from the hardware into
the cache for all non-volatile readable registers with no defaults.
Update the defaults handling to do this cache population since it is
iterating over the Controls and happens at a time the hardware is
always powered up.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-10-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The indentation of the loop processing writing out SDCA Control default
values is getting a bit large. Reduce indentation and make adding more
functionality easier by factoring out the Control handling into a helper
function.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-9-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have the SDCA_CTL_TYPE helper macros, we should use them when
identifying specific controls to simplify the code a little.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-8-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA code is very spammy on boot as it prints a lot of parsing
details using info prints. Now primary development is complete move
these to debug prints to reduce the spam.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-7-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a comment to better explain the function reset polling rate.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-6-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current locking in sdca_fdl_process() locks over
sdca_ump_cancel_timeout() and the timeout work function takes the same
lock, this can lead to a deadlock if the work runs as part of the
cancel. To fix this use scoped_guard and move the cancel timeout to be
outside the lock.
Fixes: e92e25f777 ("ASoC: SDCA: Add UMP timeout handling for FDL")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-5-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The property name is "mipi-sdca-RxUMP-ownership-transition-max-delay",
with a dash between max and delay. Add the missing dash.
Fixes: 13ef21dffe ("ASoC: SDCA: add support for HIDE entity properties and HID descriptor/report")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-3-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Both HID and the IRQ are now build into the wider SDCA kernel module, so
their module macros are redundant, remove them.
Fixes: 5030abcb0a ("ASoC: SDCA: Pull HID and IRQ into the primary SDCA module")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-2-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SND_SOC_BYTES_E_ACC() macro instead of SND_SOC_BYTES_E()
to define the CAL_DATA_RB control, so that it is marked as read-only
and volatile.
This avoids userland code expecting to be able to write to it and
then getting an unexpected EPERM error, or assuming that its value
can never change.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOC_ENUM_EXT_ACC() macro instead of SOC_ENUM_EXT() to
define the CAL_SET_STATUS control, so that it is marked as read-only
and volatile.
This avoids userland code expecting to be able to write to it and
then getting an unexpected EPERM error, or assuming that its value
can never change.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Surface Pro 2 and 3 have a strange headphone frequency response
and miss most of the bass. I discovered connecting the HP out to the
main DAC fixes this. Maybe the other is mono or intentionally filtered
signal for the built-in speakers? (At least the Lenovo Ideapad 720S
(AMD) (0x17aa, 0x3812) exhibited the same problem, but I don't have it
anymore for testing V2 changes.)
Signed-off-by: René Rebe <rene@exactco.de>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251120.124240.139462482701146043.rene@exactco.de
TAS5806M, TAS5806MD, TAS5830 has on-chip DSP without current/voltage
feedback, and in same family with TAS58XX.
TAS2568, TAS2574 is in family with TAS257X.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251117102153.30644-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
Enable SPK Mute Led and Mic Mute Led for HP platform.
It was also integrated with Tas2781 supported.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current mute_steam() implementation affects all paths instead of
only those in use by the DAI.
For example, playing to 2 DAIs simultaneously with mixing, stopping
one will mute the other.
Rework to use the same logic as hw_params() to mute only the relevant paths.
(also, use "rx->main_clk_users[j] > 0" instead of dsm_reg, which is
equivalent. I also don't think the clock enable should be in this function,
but that's a change for another patch)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-9-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
The event enables the main path clock when the mux is set to DEC0/DEC1.
My patch ("ASoC: codecs: lpass-wsa-macro: fix path clock dependencies")
makes it depend on the main path clock, so this event is now redundant.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-6-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows changing the mix gain registers from the default value.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-5-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
"WSA_RX0_CLK",etc. are path clocks, but "WSA RX0",etc. are ports, and there
isn't a correspondence between the ports and paths.
For example "WSA RX0" port could be used by the "RX1 MIX" path.
The problem becomes obvious when RX4,etc. ports are added.
Enabling the path clocks should depend on the path being enabled.
With this fix, the main path clock will be enabled whenever the path is
active: previously using the mix ports only would only activate the mix
path clock and no audio would play.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-4-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
All it does it disable the mix path clk bit, but this is already managed by
the WSA_RX_MIX0_CLK/WSA_RX_MIX1_CLK supplies.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-3-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
Reading and writing the same value to this register does nothing.
Looking at downstream driver it seems there was meant to be an offset added
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>> ---
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-2-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
WSA_MACRO_RX0 is 0 and WSA_MACRO_RX_MIX1 is (WSA_MACRO_RX_MAX-1), which
means it is not possible for the bounds check to fail.
Removing the WSA_MACRO_RX_MIX1 limit is needed to add support for other
ports (RX4, RX5, etc.), in which case the valid range depends on the HW
version: rely on the driver only setting valid ports in active_ch_mask
instead (already the case).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251117051523.16462-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy_pad(), and use kmalloc() instead of kzalloc()
because strscpy_pad() zero-pads the destination buffer and therefore
avoids writing to it twice.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251119135217.233084-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver is only used on Qualcomm platforms which now select
HAVE_SHARED_GPIOS so this flag can be dropped.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-9-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is only used on Qualcomm platforms which now select
HAVE_SHARED_GPIOS so this flag can be dropped.
Reviewed-and-tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB3
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-8-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds a pre-check in ASoC to ensure there are non-zero CPU or
codec DAIs. It also handles early failure of memory allocation for
rtd->dais by going to the cleanup path, preventing potential issues
from invalid configurations or out-of-memory situations.
Signed-off-by: jempty.liang <imntjempty@163.com>
Link: https://patch.msgid.link/20251119101116.78676-1-imntjempty@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add companion amp into the list of allowed SDCA Functions. More work
will be required to fully support companion amp, but this will let parts
including companion amp functions boot and it is a good first step to
proper support.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111140617.2997454-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.
The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20251114143503.2139-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown