can trigger with certain hardware configs and regular HZ.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=m+Ze
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot() that
was removed incorrectly during the 6.16 development cycle (Rafael
Wysocki)
- Introduce a function for registering a perf domain without triggering
a system-wide CPU capacity update and make the intel_pstate driver
use it to avoid reocurring unsuccessful attempts to update capacities
of all CPUs in the system (Rafael Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario Limonciello)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjCw/YSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1SP8H/3O8D4ZFg7CxwuTn5MofPH5BBAg3FkwB
RhXZ3WA/qjz+0CusYBJO3hsJVIfUrDUzow47zi0H4tbdqqdI7CUbOPoWnGt/N2hd
ngxL4m+t91XkngLi0eOorxFPQ1/dA1p0g5BHXrzVpuMdE94V3gxb92g3SPrvjcAF
N6fVCL3RMQqDwl5ZbadvWfXdE+07nxwogKTF/NKa+DF3SHSy3SOznKgn/AlhQEo3
RKqAhaO3+RxzfTn8M0ie/flYUFApkMbdLdxYau2Lg4Ne3MhrID3ljhssGEFaQdQ0
8z3OGmfOOOLu21F1iYaZiWWXc8wB6v47NchJvuU1FF/JQ+uXdsZZdNA=
=ZGx1
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
-----BEGIN PGP SIGNATURE-----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=09/9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"A number of fixes accumulated due to summer vacations
- Fix out-of-bounds dynptr write in bpf_crypto_crypt() kfunc which
was misidentified as a security issue (Daniel Borkmann)
- Update the list of BPF selftests maintainers (Eduard Zingerman)
- Fix selftests warnings with icecc compiler (Ilya Leoshkevich)
- Disable XDP/cpumap direct return optimization (Jesper Dangaard
Brouer)
- Fix unexpected get_helper_proto() result in unusual configuration
BPF_SYSCALL=y and BPF_EVENTS=n (Jiri Olsa)
- Allow fallback to interpreter when JIT support is limited (KaFai
Wan)
- Fix rqspinlock and choose trylock fallback for NMI waiters. Pick
the simplest fix. More involved fix is targeted bpf-next (Kumar
Kartikeya Dwivedi)
- Fix cleanup when tcp_bpf_send_verdict() fails to allocate
psock->cork (Kuniyuki Iwashima)
- Disallow bpf_timer in PREEMPT_RT for now. Proper solution is being
discussed for bpf-next. (Leon Hwang)
- Fix XSK cq descriptor production (Maciej Fijalkowski)
- Tell memcg to use allow_spinning=false path in bpf_timer_init() to
avoid lockup in cgroup_file_notify() (Peilin Ye)
- Fix bpf_strnstr() to handle suffix match cases (Rong Tao)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
bpf: Allow fall back to interpreter for programs with stack size <= 512
rqspinlock: Choose trylock fallback for NMI waiters
xsk: Fix immature cq descriptor production
bpf: Update the list of BPF selftests maintainers
selftests/bpf: Add tests for bpf_strnstr
selftests/bpf: Fix "expression result unused" warnings with icecc
bpf: Fix bpf_strnstr() to handle suffix match cases better
selftests/bpf: Extend crypto_sanity selftest with invalid dst buffer
bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt
bpf: Check the helper function is valid in get_helper_proto
bpf, cpumap: Disable page_pool direct xdp_return need larger scope
Merge a hibernation regression fix and an fix related to energy model
management for 6.17-rc6
* pm-sleep:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
* pm-em:
PM: EM: Add function for registering a PD without capacity update
When enable CONFIG_PREEMPT_RT, the kernel will warn when run timer
selftests by './test_progs -t timer':
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
In order to avoid such warning, reject bpf_timer in verifier when
PREEMPT_RT is enabled.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250910125740.52172-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Remove redundant __GFP_NOWARN flag is kmalloc
As now __GFP_NOWARN is part of __GFP_NOWAIT, it can be removed from kmalloc
as it is redundant.
- Use copy_from_user_nofault() instead of _inatomic() for trace markers
The trace_marker files are written to to allow user space to quickly write
into the tracing ring buffer. Back in 2016, the get_user_pages_fast() and
the kmap() logic was replaced by a __copy_from_user_inatomic(). But the
_inatomic() is somewhat a misnomer, as if the data being read faults, it can
cause a schedule. This is not something you want to do in an atomic context.
Since the time this was added, copy_from_user_nofault() was added which is
what is actually needed here. Replace the inatomic() with the nofault().
- Fix the assembly markup in the ftrace direct sample code
The ftrace direct sample code (which is also used for selftests), had the
size directive between the "leave" and the "ret" instead of after the ret.
This caused objtool to think the code was unreachable.
- Only call unregister_pm_notifier() on outer most fgraph registration
There was an error path in register_ftrace_graph() that did not call
unregister_pm_notifier() on error, so it was added in the error path.
The problem with that fix, is that register_pm_notifier() is only called by
the initial user of fgraph. If that succeeds, but another fgraph
registration were to fail, then unregister_pm_notifier() would be called
incorrectly.
- Fix a crash in osnoise when zero size cpumask is passed in
If a zero size CPU mask is passed in, the kmalloc() would return
ZERO_SIZE_PTR which is not checked, and the code would continue thinking it
had real memory and crash. If zero is passed in as the size of the write,
simply return 0.
- Fix possible warning in trace_pid_write()
If while processing a series of numbers passed to the "set_event_pid" file,
and one of the updates fails to allocate (triggered by a fault injection),
it can cause a warning to trigger. Check the return value of the call to
trace_pid_list_set() and break out early with an error code if it fails.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaMCL8RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnNIAQD9lMNjbpKLpTyZw49ZYyfieNPhFLJ/
94FxNKBfmXnYIwD/cBL8KPo9CApbdk5fG8NO2BAM/AK2MJIBKdfMdnseLw4=
=v8gJ
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove redundant __GFP_NOWARN flag is kmalloc
As now __GFP_NOWARN is part of __GFP_NOWAIT, it can be removed from
kmalloc as it is redundant.
- Use copy_from_user_nofault() instead of _inatomic() for trace markers
The trace_marker files are written to to allow user space to quickly
write into the tracing ring buffer.
Back in 2016, the get_user_pages_fast() and the kmap() logic was
replaced by a __copy_from_user_inatomic(), but didn't properly
disable page faults around it.
Since the time this was added, copy_from_user_nofault() was added
which does the required page fault disabling for us.
- Fix the assembly markup in the ftrace direct sample code
The ftrace direct sample code (which is also used for selftests), had
the size directive between the "leave" and the "ret" instead of after
the ret. This caused objtool to think the code was unreachable.
- Only call unregister_pm_notifier() on outer most fgraph registration
There was an error path in register_ftrace_graph() that did not call
unregister_pm_notifier() on error, so it was added in the error path.
The problem with that fix, is that register_pm_notifier() is only
called by the initial user of fgraph. If that succeeds, but another
fgraph registration were to fail, then unregister_pm_notifier() would
be called incorrectly.
- Fix a crash in osnoise when zero size cpumask is passed in
If a zero size CPU mask is passed in, the kmalloc() would return
ZERO_SIZE_PTR which is not checked, and the code would continue
thinking it had real memory and crash. If zero is passed in as the
size of the write, simply return 0.
- Fix possible warning in trace_pid_write()
If while processing a series of numbers passed to the "set_event_pid"
file, and one of the updates fails to allocate (triggered by a fault
injection), it can cause a warning to trigger. Check the return value
of the call to trace_pid_list_set() and break out early with an error
code if it fails.
* tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Silence warning when chunk allocation fails in trace_pid_write
tracing/osnoise: Fix null-ptr-deref in bitmap_parselist()
trace/fgraph: Fix error handling
ftrace/samples: Fix function size computation
tracing: Fix tracing_marker may trigger page fault during preempt_disable
trace: Remove redundant __GFP_NOWARN
Commit 12ffc3b151 ("PM: Restrict swap use to later in the suspend
sequence") incorrectly removed a pm_restrict_gfp_mask() call from
hibernation_snapshot(), so memory allocations involving swap are not
prevented from being carried out in this code path any more which may
lead to serious breakage.
The symptoms of such breakage have become visible after adding a
shrink_shmem_memory() call to hibernation_snapshot() in commit
2640e81947 ("PM: hibernate: shrink shmem pages after dev_pm_ops.prepare()")
which caused this problem to be much more likely to manifest itself.
However, since commit 2640e81947 was initially present in the DRM
tree that did not include commit 12ffc3b151, the symptoms of this
issue were not visible until merge commit 260f6f4fda ("Merge tag
'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel")
that exposed it through an entirely reasonable merge conflict
resolution.
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220555
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
The intel_pstate driver manages CPU capacity changes itself and it does
not need an update of the capacity of all CPUs in the system to be
carried out after registering a PD.
Moreover, in some configurations (for instance, an SMT-capable
hybrid x86 system booted with nosmt in the kernel command line) the
em_check_capacity_update() call at the end of em_dev_register_perf_domain()
always fails and reschedules itself to run once again in 1 s, so
effectively it runs in vain every 1 s forever.
To address this, introduce a new variant of em_dev_register_perf_domain(),
called em_dev_register_pd_no_update(), that does not invoke
em_check_capacity_update(), and make intel_pstate use it instead of the
original.
Fixes: 7b010f9b90 ("cpufreq: intel_pstate: EAS support for hybrid platforms")
Closes: https://lore.kernel.org/linux-pm/40212796-734c-4140-8a85-854f72b8144d@panix.com/
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can
cause various locking issues; see the following stack trace (edited for
style) as one example:
...
[10.011566] do_raw_spin_lock.cold
[10.011570] try_to_wake_up (5) double-acquiring the same
[10.011575] kick_pool rq_lock, causing a hardlockup
[10.011579] __queue_work
[10.011582] queue_work_on
[10.011585] kernfs_notify
[10.011589] cgroup_file_notify
[10.011593] try_charge_memcg (4) memcg accounting raises an
[10.011597] obj_cgroup_charge_pages MEMCG_MAX event
[10.011599] obj_cgroup_charge_account
[10.011600] __memcg_slab_post_alloc_hook
[10.011603] __kmalloc_node_noprof
...
[10.011611] bpf_map_kmalloc_node
[10.011612] __bpf_async_init
[10.011615] bpf_timer_init (3) BPF calls bpf_timer_init()
[10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable
[10.011619] bpf__sched_ext_ops_runnable
[10.011620] enqueue_task_scx (2) BPF runs with rq_lock held
[10.011622] enqueue_task
[10.011626] ttwu_do_activate
[10.011629] sched_ttwu_pending (1) grabs rq_lock
...
The above was reproduced on bpf-next (b338cf849e) by modifying
./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during
ops.runnable(), and hacking the memcg accounting code a bit to make
a bpf_timer_init() call more likely to raise an MEMCG_MAX event.
We have also run into other similar variants (both internally and on
bpf-next), including double-acquiring cgroup_file_kn_lock, the same
worker_pool::lock, etc.
As suggested by Shakeel, fix this by using __GFP_HIGH instead of
GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg()
raises an MEMCG_MAX event, we call __memcg_memory_event() with
@allow_spinning=false and avoid calling cgroup_file_notify() there.
Depends on mm patch
"memcg: skip cgroup_file_notify if spinning is not allowed":
https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/
v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/
https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/
v1 approach:
https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250909095222.2121438-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
OpenWRT users reported regression on ARMv6 devices after updating to latest
HEAD, where tcpdump filter:
tcpdump "not ether host 3c37121a2b3c and not ether host 184ecbca2a3a \
and not ether host 14130b4d3f47 and not ether host f0f61cf440b7 \
and not ether host a84b4dedf471 and not ether host d022be17e1d7 \
and not ether host 5c497967208b and not ether host 706655784d5b"
fails with warning: "Kernel filter failed: No error information"
when using config:
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
The issue arises because commits:
1. "bpf: Fix array bounds error with may_goto" changed default runtime to
__bpf_prog_ret0_warn when jit_requested = 1
2. "bpf: Avoid __bpf_prog_ret0_warn when jit fails" returns error when
jit_requested = 1 but jit fails
This change restores interpreter fallback capability for BPF programs with
stack size <= 512 bytes when jit fails.
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://lore.kernel.org/bpf/2e267b4b-0540-45d8-9310-e127bf95fc63@nbd.name/
Fixes: 6ebc5030e0 ("bpf: Fix array bounds error with may_goto")
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250909144614.2991253-1-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, out of all 3 types of waiters in the rqspinlock slow path
(i.e., pending bit waiter, wait queue head waiter, and wait queue
non-head waiter), only the pending bit waiter and wait queue head
waiters apply deadlock checks and a timeout on their waiting loop. The
assumption here was that the wait queue head's forward progress would be
sufficient to identify cases where the lock owner or pending bit waiter
is stuck, and non-head waiters relying on the head waiter would prove to
be sufficient for their own forward progress.
However, the head waiter itself can be preempted by a non-head waiter
for the same lock (AA) or a different lock (ABBA) in a manner that
impedes its forward progress. In such a case, non-head waiters not
performing deadlock and timeout checks becomes insufficient, and the
system can enter a state of lockup.
This is typically not a concern with non-NMI lock acquisitions, as lock
holders which in run in different contexts (IRQ, non-IRQ) use "irqsave"
variants of the lock APIs, which naturally excludes such lock holders
from preempting one another on the same CPU.
It might seem likely that a similar case may occur for rqspinlock when
programs are attached to contention tracepoints (begin, end), however,
these tracepoints either precede the enqueue into the wait queue, or
succeed it, therefore cannot be used to preempt a head waiter's waiting
loop.
We must still be careful against nested kprobe and fentry programs that
may attach to the middle of the head's waiting loop to stall forward
progress and invoke another rqspinlock acquisition that proceeds as a
non-head waiter. To this end, drop CC_FLAGS_FTRACE from the rqspinlock.o
object file.
For now, this issue is resolved by falling back to a repeated trylock on
the lock word from NMI context, while performing the deadlock checks to
break out early in case forward progress is impossible, and use the
timeout as a final fallback.
A more involved fix to terminate the queue when such a condition occurs
will be made as a follow up. A selftest to stress this aspect of nested
NMI/non-NMI locking attempts will be added in a subsequent patch to the
bpf-next tree when this fix lands and trees are synchronized.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: 164c246571 ("rqspinlock: Protect waiters in queue from stalls")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250909184959.3509085-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_strnstr() should not treat the ending '\0' of s2 as a matching character
if the parameter 'len' equal to s2 string length, for example:
1. bpf_strnstr("openat", "open", 4) = -ENOENT
2. bpf_strnstr("openat", "open", 5) = 0
This patch makes (1) return 0, fix just the `len == strlen(s2)` case.
And fix a more general case when s2 is a suffix of the first len
characters of s1.
Fixes: e91370550f ("bpf: Add kfuncs for read-only string operations")
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_17DC57B9D16BC443837021BEACE84B7C1507@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stanislav reported that in bpf_crypto_crypt() the destination dynptr's
size is not validated to be at least as large as the source dynptr's
size before calling into the crypto backend with 'len = src_len'. This
can result in an OOB write when the destination is smaller than the
source.
Concretely, in mentioned function, psrc and pdst are both linear
buffers fetched from each dynptr:
psrc = __bpf_dynptr_data(src, src_len);
[...]
pdst = __bpf_dynptr_data_rw(dst, dst_len);
[...]
err = decrypt ?
ctx->type->decrypt(ctx->tfm, psrc, pdst, src_len, piv) :
ctx->type->encrypt(ctx->tfm, psrc, pdst, src_len, piv);
The crypto backend expects pdst to be large enough with a src_len length
that can be written. Add an additional src_len > dst_len check and bail
out if it's the case. Note that these kfuncs are accessible under root
privileges only.
Fixes: 3e1c6f3540 ("bpf: make common crypto API for TC/XDP programs")
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20250829143657.318524-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- one more fix for DMA API debugging infrastructure (Baochen Qiang)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaMAGzwAKCRCJp1EFxbsS
RJcvAPwO4NrxrUQdjaXOy//DhFNG4fhMmdn6kYqD+TjTJq9QnwEA/dMGxU1fZqvM
Kqusn1iiQsHjFLRzEOExqRbL6MFDSgM=
=ViHe
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.17-2025-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- one more fix for DMA API debugging infrastructure (Baochen Qiang)
* tag 'dma-mapping-6.17-2025-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-debug: don't enforce dma mapping check on noncoherent allocations
When testing softirq based hrtimers on an ARM32 board, with high resolution
mode and NOHZ inactive, softirq based hrtimers fail to expire after being
moved away from an offline CPU:
CPU0 CPU1
hrtimer_start(..., HRTIMER_MODE_SOFT);
cpu_down(CPU1) ...
hrtimers_cpu_dying()
// Migrate timers to CPU0
smp_call_function_single(CPU0, returgger_next_event);
retrigger_next_event()
if (!highres && !nohz)
return;
As retrigger_next_event() is a NOOP when both high resolution timers and
NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not
updated and the migrated softirq timers never expire unless there is a
softirq based hrtimer queued on CPU0 later.
Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check
in retrigger_next_event(), which enforces a full update of the CPU base.
As this is not a fast path the extra cost does not matter.
[ tglx: Massaged change log ]
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com
Syzkaller trigger a fault injection warning:
WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0
Modules linked in:
CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0
Tainted: [U]=USER
Hardware name: Google Compute Engine/Google Compute Engine
RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294
Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff
RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283
RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000
RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef
R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0
FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464
register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline]
register_pid_events kernel/trace/trace_events.c:2354 [inline]
event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425
vfs_write+0x24c/0x1150 fs/read_write.c:677
ksys_write+0x12b/0x250 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We can reproduce the warning by following the steps below:
1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid
and register sched_switch tracepoint.
2. echo ' ' >> set_event_pid, and perform fault injection during chunk
allocation of trace_pid_list_alloc. Let pid_list with no pid and
assign to tr->filtered_pids.
3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to
tr->filtered_pids.
4. echo 9 >> set_event_pid, will trigger the double register
sched_switch tracepoint warning.
The reason is that syzkaller injects a fault into the chunk allocation
in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which
may trigger double register of the same tracepoint. This only occurs
when the system is about to crash, but to suppress this warning, let's
add failure handling logic to trace_pid_list_set.
Link: https://lore.kernel.org/20250908024658.2390398-1-pulehui@huaweicloud.com
Fixes: 8d6e90983a ("tracing: Create a sparse bitmask for pid filtering")
Reported-by: syzbot+161412ccaeff20ce4dde@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cb890e.050a0220.d8275.022e.GAE@google.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
to the while() loop in __iter_div_u64_rem(), when the AUX-clock
is enabled.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5NRx
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a severe slowdown regression in the timer vDSO code related to the
while() loop in __iter_div_u64_rem(), when the AUX-clock is enabled"
* tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/vsyscall: Avoid slow division loop in auxiliary clock update
A crash was observed with the following output:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 #138 PREEMPT(voluntary)
RIP: 0010:bitmap_parselist+0x53/0x3e0
Call Trace:
<TASK>
osnoise_cpus_write+0x7a/0x190
vfs_write+0xf8/0x410
? do_sys_openat2+0x88/0xd0
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, "0-2", 0);
When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return
ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which
trigger the null pointer dereference. Add check for the parameter 'count'.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <tglozar@redhat.com>
Link: https://lore.kernel.org/20250906035610.3880282-1-wangliang74@huawei.com
Fixes: 17f89102fe ("tracing/osnoise: Allow arbitrarily long CPU string")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit edede7a6dc ("trace/fgraph: Fix the warning caused by missing
unregister notifier") added a call to unregister the PM notifier if
register_ftrace_graph() failed. It does so unconditionally. However,
the PM notifier is only registered with the first call to
register_ftrace_graph(). If the first registration was successful and
a subsequent registration failed, the notifier is now unregistered even
if ftrace graphs are still registered.
Fix the problem by only unregistering the PM notifier during error handling
if there are no active fgraph registrations.
Fixes: edede7a6dc ("trace/fgraph: Fix the warning caused by missing unregister notifier")
Closes: https://lore.kernel.org/all/63b0ba5a-a928-438e-84f9-93028dd72e54@roeck-us.net/
Cc: Ye Weihua <yeweihua4@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250906050618.2634078-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=g/UF
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single small audit patch to fix a potential out-of-bounds read
caused by a negative array index when comparing paths"
* tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix out-of-bounds read in audit_compare_dname_path()
When a watch on dir=/ is combined with an fsnotify event for a
single-character name directly under / (e.g., creating /a), an
out-of-bounds read can occur in audit_compare_dname_path().
The helper parent_len() returns 1 for "/". In audit_compare_dname_path(),
when parentlen equals the full path length (1), the code sets p = path + 1
and pathlen = 1 - 1 = 0. The subsequent loop then dereferences
p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read.
Fix this by adding a pathlen > 0 check to the while loop condition
to prevent the out-of-bounds access.
Cc: stable@vger.kernel.org
Fixes: e92eebb0d6 ("audit: fix suffixed '/' filename matching")
Reported-by: Stanislav Fort <disclosure@aisle.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
[PM: subject tweak, sign-off email fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The call to __iter_div_u64_rem() in vdso_time_update_aux() is a wrapper
around subtraction. It cannot be used to divide large numbers, as that
introduces long, computationally expensive delays. A regular u64 division
is also not possible in the timekeeper update path as it can be too slow.
Instead of splitting the ktime_t offset into into second and subsecond
components during the timekeeper update fast-path, do it together with the
adjustment of tk->offs_aux in the slow-path. Equivalent to the handling of
offs_boot and monotonic_to_boot.
Reuse the storage of monotonic_to_boot for the new field, as it is not used
by auxiliary timekeepers.
Fixes: 380b84e168 ("vdso/vsyscall: Update auxiliary clock data in the datapage")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825-vdso-auxclock-division-v1-1-a1d32a16a313@linutronix.de
Closes: https://lore.kernel.org/lkml/aKwsNNWsHJg8IKzj@localhost/
The event_limit can be set by the PERF_EVENT_IOC_REFRESH to limit the
number of events. When the event_limit reaches 0, the POLL_HUP signal
should be sent. But it's missed.
The corresponding counter should be stopped when the event_limit reaches
0. It was implemented in the ARCH-specific code. However, since the
commit 9734e25fbf ("perf: Fix the throttle logic for a group"), all
the ARCH-specific code has been moved to the generic code. The code to
handle the event_limit was lost.
Add the event->pmu->stop(event, 0); back.
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/aICYAqM5EQUlTqtX@li-2b55cdcc-350b-11b2-a85c-a78bff51fc11.ibm.com/
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lkml.kernel.org/r/20250811182644.1305952-1-kan.liang@linux.intel.com
Both tracing_mark_write and tracing_mark_raw_write call
__copy_from_user_inatomic during preempt_disable. But in some case,
__copy_from_user_inatomic may trigger page fault, and will call schedule()
subtly. And if a task is migrated to other cpu, the following warning will
be trigger:
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
An example can illustrate this issue:
process flow CPU
---------------------------------------------------------------------
tracing_mark_raw_write(): cpu:0
...
ring_buffer_lock_reserve(): cpu:0
...
cpu = raw_smp_processor_id() cpu:0
cpu_buffer = buffer->buffers[cpu] cpu:0
...
...
__copy_from_user_inatomic(): cpu:0
...
# page fault
do_mem_abort(): cpu:0
...
# Call schedule
schedule() cpu:0
...
# the task schedule to cpu1
__buffer_unlock_commit(): cpu:1
...
ring_buffer_unlock_commit(): cpu:1
...
cpu = raw_smp_processor_id() cpu:1
cpu_buffer = buffer->buffers[cpu] cpu:1
As shown above, the process will acquire cpuid twice and the return values
are not the same.
To fix this problem using copy_from_user_nofault instead of
__copy_from_user_inatomic, as the former performs 'access_ok' before
copying.
Link: https://lore.kernel.org/20250819105152.2766363-1-luogengkun@huaweicloud.com
Fixes: 656c7f0d2d ("tracing: Replace kmap with copy_from_user() in trace_marker writing")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250805023630.335719-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer whose
expiration time is already in the past would cause repeated attempts to
re-enqueue a deadline server task which leads to starving the former,
realtime one
- Prevent a delayed deadline server task stop from breaking the per-runqueue
bandwidth tracking
- Have a function checking whether the deadline server task has stopped,
return the correct value
-----BEGIN PGP SIGNATURE-----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=NXg1
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a stall on the CPU offline path due to mis-counting a deadline
server task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer
whose expiration time is already in the past would cause repeated
attempts to re-enqueue a deadline server task which leads to starving
the former, realtime one
- Prevent a delayed deadline server task stop from breaking the
per-runqueue bandwidth tracking
- Have a function checking whether the deadline server task has
stopped, return the correct value
* tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Don't count nr_running for dl_server proxy tasks
sched/deadline: Fix RT task potential starvation when expiry time passed
sched/deadline: Always stop dl-server before changing parameters
sched/deadline: Fix dl_server_stopped()
To avoid a memory leak via mm_alloc() + mmdrop() the futex cleanup code
has been moved to __mmdrop(). This resulted in a warnings if the futex
hash table has been allocated via vmalloc() the mmdrop() was invoked
from atomic context.
The free path must stay in __mmput() to ensure it is invoked from
preemptible context.
In order to avoid the memory leak, delay the allocation of
mm_struct::mm->futex_ref to futex_hash_allocate(). This works because
neither the per-CPU counter nor the private hash has been allocated and
therefore
- futex_private_hash() callers (such as exit_pi_state_list()) don't
acquire reference if there is no private hash yet. There is also no
reference put.
- Regular callers (futex_hash()) fallback to global hash. No reference
counting here.
The futex_ref member can be allocated in futex_hash_allocate() before
the private hash itself is allocated. This happens either while the
first thread is created or on request. In both cases the process has
just a single thread so there can be either futex operation in progress
or the request to create a private hash.
Move futex_hash_free() back to __mmput();
Move the allocation of mm_struct::futex_ref to futex_hash_allocate().
[ bp: Fold a follow-up fix to prevent a use-after-free:
https://lore.kernel.org/r/20250830213806.sEKuuGSm@linutronix.de ]
Fixes: e703b7e247 ("futex: Move futex cleanup to __mmdrop()")
Closes: https://lore.kernel.org/all/20250821102721.6deae493@kernel.org/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lkml.kernel.org/r/20250822141238.PfnkTjFb@linutronix.de
- another small fix relevant to arm64 systems with memory encryption
(Shanker Donthineni)
- fix relevant to arm32 systems with non-standard CMA configuration
(Oreoluwa Babatunde)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaLAK7gAKCRCJp1EFxbsS
REDxAQC+5hLiyzc/1rR5EQb1D6Xr1f/0VN3IFz3creHp3juFBAEApi1iFMdmahO7
0YKG4KkzHpcNkGrxaXKP0VNtQsDLwww=
=fVrB
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- another small fix for arm64 systems with memory encryption (Shanker
Donthineni)
- fix for arm32 systems with non-standard CMA configuration (Oreoluwa
Babatunde)
* tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: Ensure DMA_DIRECT_REMAP allocations are decrypted
of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()
On CPU offline the kernel stalled with below call trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
cpuhp hold the cpu hotplug lock endless and stalled vmstat_shepherd.
This is because we count nr_running twice on cpuhp enqueuing and failed
the wait condition of cpuhp:
enqueue_task_fair() // pick cpuhp from idle, rq->nr_running = 0
dl_server_start()
[...]
add_nr_running() // rq->nr_running = 1
add_nr_running() // rq->nr_running = 2
[switch to cpuhp, waiting on balance_hotplug_wait()]
rcuwait_wait_event(rq->nr_running == 1 && ...) // failed, rq->nr_running=2
schedule() // wait again
It doesn't make sense to count the dl_server towards runnable tasks,
since it runs other tasks.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250627035420.37712-1-yangyicong@huawei.com
[Symptom]
The fair server mechanism, which is intended to prevent fair starvation
when higher-priority tasks monopolize the CPU.
Specifically, RT tasks on the runqueue may not be scheduled as expected.
[Analysis]
The log "sched: DL replenish lagged too much" triggered.
By memory dump of dl_server:
curr = 0xFFFFFF80D6A0AC00 (
dl_server = 0xFFFFFF83CD5B1470(
dl_runtime = 0x02FAF080,
dl_deadline = 0x3B9ACA00,
dl_period = 0x3B9ACA00,
dl_bw = 0xCCCC,
dl_density = 0xCCCC,
runtime = 0x02FAF080,
deadline = 0x0000082031EB0E80,
flags = 0x0,
dl_throttled = 0x0,
dl_yielded = 0x0,
dl_non_contending = 0x0,
dl_overrun = 0x0,
dl_server = 0x1,
dl_server_active = 0x1,
dl_defer = 0x1,
dl_defer_armed = 0x0,
dl_defer_running = 0x1,
dl_timer = (
node = (
expires = 0x000008199756E700),
_softexpires = 0x000008199756E700,
function = 0xFFFFFFDB9AF44D30 = dl_task_timer,
base = 0xFFFFFF83CD5A12C0,
state = 0x0,
is_rel = 0x0,
is_soft = 0x0,
clock_update_flags = 0x4,
clock = 0x000008204A496900,
- The timer expiration time (rq->curr->dl_server->dl_timer->expires)
is already in the past, indicating the timer has expired.
- The timer state (rq->curr->dl_server->dl_timer->state) is 0.
[Suspected Root Cause]
The relevant code flow in the throttle path of
update_curr_dl_se() as follows:
dequeue_dl_entity(dl_se, 0); // the DL entity is dequeued
if (unlikely(is_dl_boosted(dl_se) || !start_dl_timer(dl_se))) {
if (dl_server(dl_se)) // timer registration fails
enqueue_dl_entity(dl_se, ENQUEUE_REPLENISH);//enqueue immediately
...
}
The failure of `start_dl_timer` is caused by attempting to register a
timer with an expiration time that is already in the past. When this
situation persists, the code repeatedly re-enqueues the DL entity
without properly replenishing or restarting the timer, resulting in RT
task may not be scheduled as expected.
[Proposed Solution]:
Instead of immediately re-enqueuing the DL entity on timer registration
failure, this change ensures the DL entity is properly replenished and
the timer is restarted, preventing RT potential starvation.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Closes: https://lore.kernel.org/CAMuHMdXn4z1pioTtBGMfQM0jsLviqS2jwysaWXpoLxWYoGa82w@mail.gmail.com
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lkml.kernel.org/r/20250615131129.954975-1-kuyo.chang@mediatek.com
Commit cccb45d7c4 ("sched/deadline: Less agressive dl_server
handling") reduced dl-server overhead by delaying disabling servers only
after there are no fair task around for a whole period, which means that
deadline entities are not dequeued right away on a server stop event.
However, the delay opens up a window in which a request for changing
server parameters can break per-runqueue running_bw tracking, as
reported by Yuri.
Close the problematic window by unconditionally calling dl_server_stop()
before applying the new parameters (ensuring deadline entities go
through an actual dequeue).
Fixes: cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
Reported-by: Yuri Andriaccio <yurand2000@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20250721-upstream-fix-dlserver-lessaggressive-b4-v1-1-4ebc10c87e40@redhat.com
Commit cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
introduces dl_server_stopped(). But it is obvious that dl_server_stopped()
should return true if dl_se->dl_server_active is 0.
Fixes: cccb45d7c4 ("sched/deadline: Less agressive dl_server handling")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250809130419.1980742-1-chenhuacai@loongson.cn
This includes a fix part of the KSPP (Kernel Self Protection Project) to replace
the deprecated and unsafe strcpy() calls in the kernel parameter string handler
and sysfs parameters for built-in modules. Single commit, no functional changes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE73Ua4R8Pc+G5xjxTQJ6jxB8ZUfsFAmiqshwACgkQQJ6jxB8Z
UfuF8Q//UVMLtvEREUM8m18u1SVDhnO9/+Dpl/bkTof+w03KviIbAN/VXm6qn3C7
ZYtK5lDWU4twg+bOpC6EC/LdNVNyJx6cCpqkZFri21i9Yhf5ak0Sp833lWTZdqH/
DDNCCAOuFH1EaihlJwQ/T4ox1CUOBTC49HyCBnVvdWiCCevUaPbxc8Cgsuzp/gsf
vqXoOJCYKZD2ZdeRKgW7EgETWUljIpvjfXnb3DtMHztj92wzHPaCR50d0iBJbpZi
3JEmrZ6FQ+sb+Qgp4VrW7ZEIa8UFGusqKVZBzJfZR61OU+iVz97gg2WptczsTZCa
GoV0sM5MbNwaBtaMEoM40OiQWCAtYyfsIFmOH142Djcmzgs2hGFTGMKgZReDRs8B
XiPPTq0IW5czYLoNyzJKvtoRX1qBC7wV0rxN9MY8AQieCPmhV3fQsjUgnPKwUOlV
4U5EvzI2Qy4LL5oEUp3rEcymio/rP1wrd0dFxx/D+bMMj//PRF+9rr51deZ/tqtz
Y0Q8rI7CYYlhg0I6XH8t2sAe2TypbU8gNGhOi23Z9vBZwtOv1e3fGTQXymopvVT4
m50c541senApTKFHDbbck2KXwNyasdtIWCQrtChaP99Y0Lk2KRxkgYtVuCJEPNsv
rFjyK3KnfkhhqNJEl4I8EUJwfQ1z9tUHJyfx1p0q74cShV7fRg8=
=8/92
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad1 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
or aren't considered necessary for -stable kernels. 17 of these fixes are
for MM.
As usual, singletons all over the place, apart from a three-patch series
of KHO followup work from Pasha which is actually also a bunch of
singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaKfFVwAKCRDdBJ7gKXxA
jvZGAQCCRTRgwnYsH0op9Rlxs72zokENbErSzXweWLez31pNpAD/S7bVSjjk1mXr
BQ24ZadKUUomWkghwCusb9VomMeneg0=
=+uBT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
- Fix NULL de-ref in css_rstat_exit() which could happen after allocation
failure.
- Fix a cpuset partition handling bug and a couple other misc issues.
- Doc spelling fix.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKd9WQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd3pAQCkqjlcHyKBOr8AXCcNmisyj0PvSFJwmcCWf3Mu
7gsJ0wEAjxqs+otIPHzjhQlRBMN1vhwn5/B/xVqKO57pCHtrGQY=
=zj8n
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
- Fix a subtle bug during SCX enabling where a dead task skips init but
doesn't skip sched class switch leading to invalid task state transition
warning.
- Cosmetic fix in selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKdWkg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWI2AP9e+OTPPHa+sHeM7g3ngigF44nyvvRIPIMJHmZO
7CYT9AD/e+YI+atHzo5iSBcpGwjW8BSLc0ozdrkI0N7XFLXC4go=
=7Ti1
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
- tracing: fprobe-event: Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but
unless the user specifies its event name, it makes an event with
the wildcards. Replace the wildcard '*' with the underscore '_'.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmimVxYbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bjlMIALQlChmfvICQBq7uGUJs
+ZiZUielrlBbxjRqSCNXibt5tuA3NJr2uuZ6DT5JVF1On/c9onlabiXoFb/SWmRa
nyWyKsrEgIb3X7QjnpR7MDurxwK98OJMzmFwtFa3gzFD/PUeb9t3qyx+yt/k1CUV
uqsB00LrbHMYLDHQufR2pWrGooVejznt92gFCPIfEFJnEJ9hiaFfK6nBmzrjMmZS
A3d70+6r5v76cANMwlYTxB53ewbiOuUvmDT09d0N+zg4y/5BZia8Asnjf3iBjIUB
V/ePLO598Po6XlIKhjVHD1nmZezrvff+IToIZOfNXerDrzwqrKxXqUdce6VB6KEU
VGU=
=i5Hg
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but unless
the user specifies its event name, it makes an event with the
wildcards. Replace the wildcard '*' with the underscore '_'"
* tag 'probes-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe-event: Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes: 4a2b8dda3f ("tracing/function-graph-tracer: fix a regression while suspend to disk")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c0 ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds