Rename PL080 DMA controller device node name to the expected one.
The issue was reported by a dt binding checker:
dma@31000000: $nodename:0: 'dma@31000000' does not match '^dma-controller(@.*)?$'
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
For DMA controllers it is required to specify a number of the cells for
users.
The change eliminates the next build time reported warning:
dma@31000000: '#dma-cells' is a required property
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The SD/MMC controller on NXP LPC32xx SoC is ARM PrimeCell PL180, it is
reported by the driver:
mmci-pl18x 20098000.sd: mmc0: PL180 manf 41 rev0 at 0x20098000 irq 36,37 (pio)
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change the PL180 SD/MMC controller device node name to the expected
'mmc' one.
The change removes a reported warning:
sd@20098000: $nodename:0: 'sd@20098000' does not match '^mmc(@.*)?$'
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change once a customly selected 'mpwm' node name in favour of
the expected 'pwm' one.
The change eliminates a reported warning:
mpwm@400e8000: $nodename:0: 'mpwm@400e8000' does not match '^pwm(@.*|-([0-9]|[1-9][0-9]+))?$'
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Since commit 4cd2f417a0 ("dt-bindings: pwm: Convert lpc32xx-pwm.txt
to yaml format") both types of PWM controlles on NXP LPC32xx SoC
fairly gained 3 cells, reflect it in the platform dtsi file.
The change removes a dt binding checker warning:
mpwm@400e8000: #pwm-cells:0:0: 3 was expected
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add missed arm,num-irq-priority-bits to fix below CHECK_DTBS warning:
arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: interrupt-controller@e000e100 (arm,armv7m-nvic): 'arm,num-irq-priority-bits' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add #address-cells and #szie-cells for spi flash controller to fix below
CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #address-cells for SPI bus
also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3
arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #size-cells for SPI bus
also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change node name mdio0 to mdio to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: ethernet@40010000 (nxp,lpc1850-dwmac): Unevaluated properties are not allowed ('mdio0' was unexpected)
from schema $id: http://devicetree.org/schemas/net/nxp,lpc1850-dwmac.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change node name 'button[0-9]' to button-[0-9]' to fix below CHECK_DTB
warning:
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: pca_buttons (gpio-keys-polled): 'button0', ... do not match any of the regexes: '^(button|...', 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add power-supply for innolux,at070tn92 to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: panel (innolux,at070tn92): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add cfg surfix in pinctrl child node to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: pinctrl@40086000 (nxp,lpc1850-scu): ssp-pins: 'ssp1_cs', 'ssp1_miso_mosi', 'ssp1_sck' do not match any of the regexes: '^pinctrl-[0-9]+$', '_cfg$'
from schema $id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add #address-cells and #size-cells for sram node to fix below DTB_CHECK
warnings:
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: sram@2,0 (mmio-sram): '#address-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Swap clock-names bic and cui to fix below CHECK_DTB warnings:
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dtb: mmc@40004000 (snps,dw-mshc): clock-names:0: 'biu' was expected
from schema $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
/home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dtb: mmc@40004000 (snps,dw-mshc): clock-names:1: 'ciu' was expected
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change node name 'flash' to 'flash@0' to fix below CHECK_DTB warnings.
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): Unevaluated properties are not allowed ('flash' was unexpected)
from schema $id: http://devicetree.org/schemas/mtd/nxp,lpc1773-spifi.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Change node name mmcsd to mmc to fix CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: mmcsd@40004000 (snps,dw-mshc): $nodename:0: 'mmcsd@40004000' does not match '^mmc(@.*)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Anyway it is SPI controller although intent to connect qspi flash.
Rename node name flash-controller to spi to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): $nodename:0: 'flash-controller@40003000' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
If these PWMs are to be used, a #pwm-cells property is necessary. The
right location for that is in the SoC's dtsi file to not make
machine.dts files repeat the value for each usage. Currently the
machines based on nxp/lpc/lpc32xx.dtsi don't make use of the PWMs, so
there are no properties to drop there.
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Vladimir Zapolskiy