cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a single
allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components
-----BEGIN PGP SIGNATURE-----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=ZVKY
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
All architectures define the same set of generic TIF bits. This makes it
pointlessly hard to add a new generic TIF bit or to change an existing one.
Provide a generic variant and convert the architectures which utilize the
generic entry code over to use it. The TIF space is divided into 16 generic
bits and 16 architecture specific bits, which turned out to provide enough
space on both sides.
-----BEGIN PGP SIGNATURE-----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=6L98
-----END PGP SIGNATURE-----
Merge tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull TIF bit unification updates from Thomas Gleixner:
"A set of changes to consolidate the generic TIF (thread info flag)
bits accross architectures.
All architectures define the same set of generic TIF bits. This makes
it pointlessly hard to add a new generic TIF bit or to change an
existing one.
Provide a generic variant and convert the architectures which utilize
the generic entry code over to use it. The TIF space is divided into
16 generic bits and 16 architecture specific bits, which turned out to
provide enough space on both sides"
* tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: Fix bitflag conflict for TIF_FIXADE
riscv: Use generic TIF bits
loongarch: Use generic TIF bits
s390/entry: Remove unused TIF flags
s390: Use generic TIF bits
x86: Use generic TIF bits
asm-generic: Provide generic TIF infrastructure
of an AMD platform like the security processor (ASP) firmware, modules
etc, for example. The intent being that these updates are interim,
live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor generating
unexpected interrupts and injecting them into such guest, thus
interfering with its operation in an unexpected and negative manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory. The problem
was that the toolchain-generated version of the code was being
executed from a different mapping of memory than what was "assumed"
during code generation, needing an ever-growing pile of fixups for
absolute memory references which are invalid in the early, 1:1 memory
mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this:
https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com
- The usual cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=shVa
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them. Previously, due to hw
limitations, bandwidth counts from untracked resources would get lost
when those resources are not tracked. Refactor the code and user
interfaces to be able to also support other, similar features on ARM,
for example
-----BEGIN PGP SIGNATURE-----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=2FMs
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Add support on AMD for assigning QoS bandwidth counters to resources
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them.
Previously, due to hw limitations, bandwidth counts from untracked
resources would get lost when those resources are not tracked.
Refactor the code and user interfaces to be able to also support
other, similar features on ARM, for example"
* tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled
MAINTAINERS: resctrl: Add myself as reviewer
x86/resctrl: Configure mbm_event mode if supported
fs/resctrl: Introduce the interface to switch between monitor modes
fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled
fs/resctrl: Introduce the interface to modify assignments in a group
fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group
fs/resctrl: Auto assign counters on mkdir and clean up on group removal
fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir
fs/resctrl: Provide interface to update the event configurations
fs/resctrl: Add event configuration directory under info/L3_MON/
fs/resctrl: Support counter read/reset with mbm_event assignment mode
x86/resctrl: Implement resctrl_arch_reset_cntr() and resctrl_arch_cntr_read()
x86/resctrl: Refactor resctrl_arch_rmid_read()
fs/resctrl: Introduce counter ID read, reset calls in mbm_event mode
fs/resctrl: Pass struct rdtgroup instead of individual members
fs/resctrl: Add the functionality to unassign MBM events
fs/resctrl: Add the functionality to assign MBM events
x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC
fs/resctrl: Introduce event configuration field in struct mon_evt
...
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=sMTE
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
- A bunch of the usual cleanups and fixlets, some of them resulting from
fuzzing the different mitigation options
-----BEGIN PGP SIGNATURE-----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=ALng
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigation updates from Borislav Petkov:
- Add VMSCAPE to the attack vector controls infrastructure
- A bunch of the usual cleanups and fixlets, some of them resulting
from fuzzing the different mitigation options
* tag 'x86_bugs_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Report correct retbleed mitigation status
x86/bugs: Fix reporting of LFENCE retpoline
x86/bugs: Fix spectre_v2 forcing
x86/bugs: Remove uses of cpu_mitigations_off()
x86/bugs: Simplify SSB cmdline parsing
x86/bugs: Use early_param() for spectre_v2
x86/bugs: Use early_param() for spectre_v2_user
x86/bugs: Add attack vector controls for VMSCAPE
x86/its: Move ITS indirect branch thunks to .text..__x86.indirect_thunk
- Cleanup and simplify the AMD RAS side, unify code, drop unused stuff
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjWZhQACgkQEsHwGGHe
VUqyWBAAndQgG8ZIH2kALrinJn4zBswHtJ0T5a5viadZtmiQBL2Z25ZeMGo22jJF
zkHb2FOsXIZmOZUkW6UdU3O+4EdlYWsflwDpPZuGnwsSsXYyvT/eSvhkZ3BsBjgI
OHAxG/1HHZaAz2SfGMFu63xm05+X/d9f5jprU5fa9Obf52VraTM8X5hPa4IQ1Q1B
UT25TjYaR4IiTy/2hBfKRSFyrOqYDRNkwhoRJkxtJ0uLLZcjvolbc+WL+zVfSd/2
JC65bTOxpmlImDl8J02y1QD3m0XwTFxdbi4LhpVa1qCu28nnk6HBXEZizr/P3foM
8HsNRg6vSDDtW4jwy8uyr/AgTCnLj/GTP6wPU49sEJfsCN0XqeIbibu5NVygKQb8
L+RhEqG7wdbzd1vLc858lZKl1wSx2rFOTE5xz0weTS5eSIFpiTYvsQtoJPjN5SOH
rl1iwDtYhHXrGEYcel+af3zJrzJGB7+e5dVRPRicbPw1F0+Ty7Zdd04yk5VRV5LV
XndmK8JqWQPtZ+m8W3I6CznzAlzRUKtdm/J6sst9HQSU2Rk4CHqABi/Kgff2t7A4
ZjXYoLH9zVcM1R/unMsjqg7u4xLeB5x5vAOBlK9ruQSVZc03W+XAXPBD2a+6yXTb
rPzDkV9aT77Sipk8cHR2shxu6Aw5HazRZmw5Gsid+8Uy9VFedPE=
=+njZ
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Unify and refactor the MCA arch side and better separate code
- Cleanup and simplify the AMD RAS side, unify code, drop unused stuff
* tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Add a clear_bank() helper
x86/mce: Move machine_check_poll() status checks to helper functions
x86/mce: Separate global and per-CPU quirks
x86/mce: Do 'UNKNOWN' vendor check early
x86/mce: Define BSP-only SMCA init
x86/mce: Define BSP-only init
x86/mce: Set CR4.MCE last during init
x86/mce: Remove __mcheck_cpu_init_early()
x86/mce: Cleanup bank processing on init
x86/mce/amd: Put list_head in threshold_bank
x86/mce/amd: Remove smca_banks_map
x86/mce/amd: Remove return value for mce_threshold_{create,remove}_device()
x86/mce/amd: Rename threshold restart function
mnemonic because the minimum binutils version supports it
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjWZUoACgkQEsHwGGHe
VUpFiBAAjaGbb700+W4qCbdtXHkZqdr/1al4LrxhBzVda6DJTYCIXSLjT086rTsr
kZ424g/XAw5YhQZBeVbUoYDe1tAfi14yskjJX5rwxD9kwYcoPRTw5Y68V5xc6TBt
MpG2M5XIJDYG3A0uRjSSrj6zDsN13hxJZr78otmMG8mJo+rejhoVl4QTi0KxHPhw
dLeu3K8MRtzAwrcuv8J/u63PJPnGeJrS0Dsf+Lu5+tdAIvcmyAkflDd5pEIiVngi
kXgAZsZrCGjG6UrOirNnW5mzOLQm81N2DTv9A/eJCaCpi+dB0oY4xvy9ilpM6yxE
kVswTY3loKGvxXpjBSMdA5D6hen1pfqdiYyc0YxD9JvjROxAYQqX/wH26dH24Fjn
kJY+S9QHt+OLDNsUER901Dk/UKeJpMJw3nzbdiAfhDouAK2nMU3h53W5ILVlMGIR
l0fH1ryxLLvm4BA2OOK2DTFccNEtO3vGl8NbiIKHI840lsGZldGfmszmM2egxhik
gptRS+Xz0SsTsCbni0jJ2TZc55rXWfqm1kGJxtuE/+KoR/Xwi1XrlhFpGnUOZiJO
vdWQZjF4eAFgDVQI0cJ8YFUTzZj/r6cvhhBo7kNa+5zKzul70R3zS03qp+pDHkGW
1JkmvSHo+XsxQxO5H7A26RmfEmjqGIDgbZ93PYBWvy5BE2veCPY=
=VSzx
-----END PGP SIGNATURE-----
Merge tag 'x86_asm_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm update from Borislav Petkov:
- Fix RDPID's output operand size in inline asm and use the insn
mnemonic because the minimum binutils version supports it
* tag 'x86_asm_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix output operand size of RDPID
present on the AMD Bulldozer uarch
-----BEGIN PGP SIGNATURE-----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=mUtz
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction decoder update from Borislav Petkov:
- Add instruction decoding support for the XOP-prefixed instruction set
present on the AMD Bulldozer uarch
[ These instructions don't normally happen, but a X86_NATIVE_CPU build
on a bulldozer host can make the compiler then use these unusual
instruction encodings ]
* tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Add XOP prefix instructions decoder support
Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This
is in reaction to the recently fixed refcount bugs, which
could have been detected earlier and could have mitigated
the bug somewhat. (Thomas Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation
for sframes. (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which
gives a substantial speedup. (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver
(Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sVXH
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaNZ35gAKCRCAXGG7T9hj
vg/BAPwOpOT8J8TV2CwxRdqEJAJBysoicMbxGw+6v97OssMymwD+JCWYkrt6pyrn
mgKCT6FSOB6ZQ50IWYSr8DMQXjHybAU=
=NzbF
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix the migration of a Xen virq to another cpu plus some related
cleanup work
- clean up Xen-PV mode specific code, resulting in removing some of
that code in the resulting binary in case CONFIG_XEN_PV is not set
- fixes and cleanup for suspend handling under Xen
* tag 'for-linus-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: take system_transition_mutex on suspend
xen/manage: Fix suspend error path
xen/events: Update virq_to_irq on migration
xen/events: Return -EEXIST for bound VIRQs
xen/events: Cleanup find_virq() return codes
x86/xen: select HIBERNATE_CALLBACKS more directly
drivers/xen/gntdev: use xen_pv_domain() instead of cached value
xen: replace XENFEAT_auto_translated_physmap with xen_pv_domain()
xen: rework xen_pv_domain()
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNraNQAKCRA2KwveOeQk
u/DkAPwKPP5BSmVR2wkdpQaXIr3PGA+cbBYp34DMJNujZ9piIwD/WZ+HfGTLoERy
+2Q6HLj9hUdd+Rx3IZ8/w1QmnhUIUAU=
=AwV9
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's ffs()-family
of functions.
- Add KUnit tests for ffs() behavior and const-ness.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNrWngAKCRA2KwveOeQk
u3ZGAPwJTscARU4MspnqpbuAV601dG1TNoJG+8JYH84r+R2jjQEAlmBZB0jaHbC2
qFWjHivD/0ofvihKfAPFgxlakyV1XAg=
=diXF
-----END PGP SIGNATURE-----
Merge tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc
ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl
8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY=
=tUXG
-----END PGP SIGNATURE-----
Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Christian reported that commit a430c11f40 ("intel_idle: Rescan "dead" SMT
siblings during initialization") broke the use case in which both 'nosmt'
and 'maxcpus' are on the kernel command line because it onlines primary
threads, which were offline due to the maxcpus limit.
The initially proposed fix to skip primary threads in the loop is
inconsistent. While it prevents the primary thread to be onlined, it then
onlines the corresponding hyperthread(s), which does not really make sense.
The CPU iterator in cpuhp_smt_enable() contains a check which excludes all
threads of a core, when the primary thread is offline. The default
implementation is a NOOP and therefore not effective on x86.
Implement topology_is_core_online() on x86 to address this issue. This
makes the behaviour consistent between x86 and PowerPC.
Fixes: a430c11f40 ("intel_idle: Rescan "dead" SMT siblings during initialization")
Fixes: f694481b1d ("ACPI: processor: Rescan "dead" SMT siblings during initialization")
Closes: https://lore.kernel.org/linux-pm/724616a2-6374-4ba3-8ce3-ea9c45e2ae3b@arm.com/
Reported-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/12740505.O9o76ZdvQC@rafael.j.wysocki
When leaking certain page types, such as Hypervisor Fixed (HV_FIXED)
pages, it does not make sense to dump RMP contents for the 2MB range of
the page(s) being leaked. In the case of HV_FIXED pages, this is not an
error situation where the surrounding 2MB page RMP entries can provide
debug information.
Add new __snp_leak_pages() API with dump_rmp bool parameter to support
continue adding pages to the snp_leaked_pages_list but not issue
dump_rmpentry().
Make snp_leak_pages() a wrapper for the common case which also allows
existing users to continue to dump RMP entries.
Suggested-by: Thomas Lendacky <Thomas.Lendacky@amd.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/cover.1758057691.git.ashish.kalra@amd.com
Add defines for the 0xc001_1005 MSR (Core::X86::Msr::CPUID_ExtFeatures) used
to toggle the extended CPUID features, instead of using literal numbers. Also
define and use the bits necessary for an old TOPOEXT fixup on AMD Family 0x15
processors.
No functional changes intended.
[ bp: Massage, rename MSR to adhere to the documentation name. ]
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/20250901170418.4314-1-kprateek.nayak@amd.com
This model was added as INTEL_PANTHERCOVE_X (based on the name of the
core) with a comment that the platform name is Diamond Rapids. It was
also placed at the end of the file in a new section for family 19
processors.
This is different from previous naming as Andrew Cooper noted.
PeterZ agreed and posted a patch[1] to fix the name and move it in
sequence with other Xeon servers. But without a commit description or
sign-off the patch wasn't ever applied.
Patch updated to cover one additional use of the #define by turbostat
and to change the "Family 6" comment to also list 18 and 19 since new
models in these families are mixed in with family 6.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/all/20250214130205.GK14028@noisy.programming.kicks-ass.net/ # [1]
No point in defining generic items and the upcoming RSEQ optimizations are
only available with this _and_ the generic entry infrastructure, which is
already used by x86. So no further action required here.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
The sev_evict_cache() is guest-related code and should be guarded by
CONFIG_AMD_MEM_ENCRYPT, not CONFIG_KVM_AMD_SEV.
CONFIG_AMD_MEM_ENCRYPT=y is required for a guest to run properly as an SEV-SNP
guest, but a guest kernel built with CONFIG_KVM_AMD_SEV=n would get the stub
function of sev_evict_cache() instead of the version that performs the actual
eviction. Move the function declarations under the appropriate #ifdef.
Fixes: 7b306dfa32 ("x86/sev: Evict cache lines during SNP memory validation")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org # 6.16.x
Link: https://lore.kernel.org/r/70e38f2c4a549063de54052c9f64929705313526.1757708959.git.thomas.lendacky@amd.com
Simplify the SSB command line parsing by selecting a mitigation directly, as
is done in most of the simpler vulnerabilities. Use early_param() instead of
cmdline_find_option() for consistency with the other mitigation selections.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250819192200.2003074-4-david.kaplan@amd.com
Detect the Bhyve hypervisor and enable 15-bit MSI support if available.
Detecting Bhyve used to be a purely cosmetic issue of the kernel printing
'Hypervisor detected: Bhyve' at boot time.
But FreeBSD 15.0 will support¹ the 15-bit MSI enlightenment to support
more than 255 vCPUs (http://david.woodhou.se/ExtDestId.pdf) which means
there's now actually some functional reason to do so.
¹ https://github.com/freebsd/freebsd-src/commit/313a68ea20b4
[ bp: Massage, move tail comment ontop. ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://lore.kernel.org/03802f6f7f5b5cf8c5e8adfe123c397ca8e21093.camel@infradead.org
The ABMC feature allows users to assign a hardware counter to an RMID,
event pair and monitor bandwidth usage as long as it is assigned. The
hardware continues to track the assigned counter until it is explicitly
unassigned by the user.
The ABMC feature implements an MSR L3_QOS_ABMC_CFG (C000_03FDh).
ABMC counter assignment is done by setting the counter id, bandwidth
source (RMID) and bandwidth configuration.
Attempts to read or write the MSR when ABMC is not enabled will result
in a #GP(0) exception.
Introduce the data structures and definitions for MSR L3_QOS_ABMC_CFG
(0xC000_03FDh):
=========================================================================
Bits Mnemonic Description Access Reset
Type Value
=========================================================================
63 CfgEn Configuration Enable R/W 0
62 CtrEn Enable/disable counting R/W 0
61:53 – Reserved MBZ 0
52:48 CtrID Counter Identifier R/W 0
47 IsCOS BwSrc field is a CLOSID R/W 0
(not an RMID)
46:44 – Reserved MBZ 0
43:32 BwSrc Bandwidth Source R/W 0
(RMID or CLOSID)
31:0 BwType Bandwidth configuration R/W 0
tracked by the CtrID
==========================================================================
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
[ bp: Touchups. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
Add the functionality to enable/disable the AMD ABMC feature.
The AMD ABMC feature is enabled by setting enabled bit(0) in the
L3_QOS_EXT_CFG MSR. When the state of ABMC is changed, the MSR needs to be
updated on all the logical processors in the QOS Domain.
Hardware counters will reset when ABMC state is changed.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
Users can create as many monitor groups as RMIDs supported by the hardware.
However, the bandwidth monitoring feature on AMD only guarantees that RMIDs
currently assigned to a processor will be tracked by hardware. The counters of
any other RMIDs which are no longer being tracked will be reset to zero.
The MBM event counters return "Unavailable" for the RMIDs that are not tracked
by hardware. So, there can be only limited number of groups that can give
guaranteed monitoring numbers. With ever changing configurations there is no
way to definitely know which of these groups are being tracked during
a particular time. Users do not have the option to monitor a group or set of
groups for a certain period of time without worrying about RMID being reset in
between.
The ABMC feature allows users to assign a hardware counter to an RMID, event
pair and monitor bandwidth usage as long as it is assigned. The hardware
continues to track the assigned counter until it is explicitly unassigned by
the user. There is no need to worry about counters being reset during this
period. Additionally, the user can specify the type of memory transactions
(e.g., reads, writes) for the counter to track.
Without ABMC enabled, monitoring will work in current mode without assignment
option.
The Linux resctrl subsystem provides an interface that allows monitoring of up
to two memory bandwidth events per group, selected from a combination of
available total and local events. When ABMC is enabled, two events will be
assigned to each group by default, in line with the current interface design.
Users will also have the option to configure which types of memory
transactions are counted by these events.
Due to the limited number of available counters (32), users may quickly
exhaust the available counters. If the system runs out of assignable ABMC
counters, the kernel will report an error. In such cases, users will need to
unassign one or more active counters to free up counters for new assignments.
resctrl will provide options to assign or unassign events through the
group-specific interface file.
The feature is detected via CPUID_Fn80000020_EBX_x00 bit 5: ABMC (Assignable
Bandwidth Monitoring Counters).
The ABMC feature details are documented in APM [1] available from [2]. [1]
AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
[ bp: Massage commit message, fixup enumeration due to VMSCAPE ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
rdt_mon_features is used as a bitmask of enabled monitor events. A monitor
event's status is now maintained in mon_evt::enabled with all monitor events'
mon_evt structures found in the filesystem's mon_event_all[] array.
Remove the remaining uses of rdt_mon_features.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The resctrl file system now has complete knowledge of the status of every
event. So there is no need for per-event function calls to check.
Replace each of the resctrl_arch_is_{event}enabled() calls with
resctrl_is_mon_event_enabled(QOS_{EVENT}).
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc6' into drm-next
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently, MCA initialization is executed identically on each CPU as
they are brought online. However, a number of MCA initialization tasks
only need to be done once.
Define a function to collect all 'global' init tasks and call this from
the BSP only. Start with CPU features.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
-----BEGIN PGP SIGNATURE-----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=8wrr
-----END PGP SIGNATURE-----
Merge tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
When compiled without CONFIG_VIDEO the architecture specific
implementations of video_is_primary_device() include prototypes and
assume that video-common.c will be linked. Guard against this so that the
fallback inline implementation that returns false will be used when
compiled without CONFIG_VIDEO.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506221312.49Fy1aNA-lkp@intel.com/
Link: https://lore.kernel.org/r/20250811162606.587759-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Add missing __attribute_const__ annotations to x86's implementations of
variable__ffs(), variable_ffz(), __fls(), variable_ffs(), and fls() functions.
These are pure mathematical functions that always return the same result for the same
input with no side effects, making them eligible for compiler optimization.
Build tested ARCH=x86_64 defconfig with GCC gcc 14.2.0.
Link: https://github.com/KSPP/linux/issues/364 [1]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-4-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Instead of testing the XENFEAT_auto_translated_physmap feature, just
use !xen_pv_domain() which is equivalent.
This has the advantage that a kernel not built with CONFIG_XEN_PV
will be smaller due to dead code elimination.
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250826145608.10352-3-jgross@suse.com>
Unify the bank preparation into __mcheck_cpu_init_clear_banks(), rename that
function to what it does now - prepares banks. Do this so that generic and
vendor banks init goes first so that settings done during that init can take
effect before the first bank polling takes place.
Move __mcheck_cpu_check_banks() into __mcheck_cpu_init_prepare_banks() as it
already loops over the banks.
The MCP_DONTLOG flag is no longer needed, since the MCA polling function is
now called only if boot-time logging should be done.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250825-wip-mca-updates-v5-5-865768a2eef8@amd.com
The return values are not checked, so set return type to 'void'.
Also, move function declarations to internal.h, since these functions are
only used within the MCE subsystem.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-6-236dd74f645f@amd.com
This function is going away so replace the callsites with the equivalent
functionality. Add a new SAVIC-specific termination reason. If more
granularity is needed there, it will be revisited in the future.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Move startup code out of the __head section, now that this no longer has
a special significance. Move everything into .text or .init.text as
appropriate, so that startup code is not kept around unnecessarily.
[ bp: Fold in hunk to fix 32-bit CPU hotplug:
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509022207.56fd97f4-lkp@intel.com ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-45-ardb+git@google.com
Recent EFI x86 systems are more strict when it comes to mapping boot
images, and require that mappings are either read-write or read-execute.
Now that the boot code is being cleaned up and refactored, most of it is
being moved into .init.text [where it arguably belongs] but that implies
that when booting on such strict EFI firmware, we need to take care to
map .init.text (and the .altinstr_aux section that follows it)
read-execute as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-44-ardb+git@google.com
In order to be able to have tight control over which code may execute
from the early 1:1 mapping of memory, but still link vmlinux as a single
executable, prefix all symbol references in startup code with __pi_, and
invoke it from outside using the __pi_ prefix.
Use objtool to check that no absolute symbol references are present in
the startup code, as these cannot be used from code running from the 1:1
mapping.
Note that this also requires disabling the latent-entropy GCC plugin, as
the global symbol references that it injects would require explicit
exports, and given that the startup code rarely executes more than once,
it is not a useful source of entropy anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-43-ardb+git@google.com
To avoid having to reason about whether or not to use the per-CPU SVSM calling
area when running startup and init code on the boot CPU, reuse the boot SVSM
calling area as the per-CPU area for the BSP.
Thus, remove the need to make the per-CPU variables and associated state in
sev_cfg accessible to the startup code once confined.
[ bp: Massage commit message. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-33-ardb+git@google.com
The early page state change API is mostly only used very early, when only the
boot time SVSM calling area is in use. However, this API is also called by the
kexec finishing code, which runs very late, and potentially from a different
CPU (which uses a different calling area).
To avoid pulling the per-CPU SVSM calling area pointers and related SEV state
into the startup code, refactor the page state change API so the SVSM calling
area virtual and physical addresses can be provided by the caller.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-32-ardb+git@google.com
The boottime SVSM calling area is used both by the startup code running from
a 1:1 mapping, and potentially later on running from the ordinary kernel
mapping.
This SVSM calling area is statically allocated, and so its physical address
doesn't change. However, its virtual address depends on the calling context
(1:1 mapping or kernel virtual mapping), and even though the variable that
holds the virtual address of this calling area gets updated from 1:1 address
to kernel address during the boot, it is hard to reason about why this is
guaranteed to be safe.
So instead, take the RIP-relative address of the boottime SVSM calling area
whenever its virtual address is required, and only use a global variable for
the physical address.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250828102202.1849035-30-ardb+git@google.com
Both the decompressor and the core kernel implement an early #VC handler,
which only deals with CPUID instructions, and full featured one, which can
handle any #VC exception.
The former communicates with the hypervisor using the MSR based protocol,
whereas the latter uses a shared GHCB page, which is configured a bit later
during the boot, when the kernel runs from its ordinary virtual mapping,
rather than the 1:1 mapping that the startup code uses.
Accessing this shared GHCB page from the core kernel's startup code is
problematic, because it involves converting the GHCB address provided by the
caller to a physical address. In the startup code, virtual to physical address
translations are problematic, given that the virtual address might be a 1:1
mapped address, and such translations should therefore be avoided.
This means that exposing startup code dealing with the GHCB to callers that
execute from the ordinary kernel virtual mapping should be avoided too. So
move all GHCB page based communication out of the startup code, now that all
communication occurring before the kernel virtual mapping is up relies on the
MSR protocol only.
As an exception, add a flag representing the need to apply the coherency
fix in order to avoid exporting CPUID* helpers because of the code
running too early for the *cpu_has* infrastructure.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-29-ardb+git@google.com
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea095 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With all the pieces in place now, enable Secure AVIC in the Secure AVIC
Control MSR. Any access to x2APIC MSRs are emulated by the hypervisor
before Secure AVIC is enabled in the control MSR. Post Secure AVIC
enablement, all x2APIC MSR accesses (whether accelerated by AVIC
hardware or trapped as a #VC exception) operate on the vCPU's APIC
backing page.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828112126.209028-1-Neeraj.Upadhyay@amd.com
Linus Torvalds