Configure mbm_event mode on AMD platforms. On AMD platforms, it is
recommended to use the mbm_event mode, if supported, to prevent the
hardware from resetting counters between reads. This can result in
misleading values or display "Unavailable" if no counter is assigned
to the event.
Enable mbm_event mode, known as ABMC (Assignable Bandwidth Monitoring
Counters) on AMD, by default if the system supports it.
Update ABMC across all logical processors within the resctrl domain to
ensure proper functionality.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
System software reads resctrl event data for a particular resource by writing
the RMID and Event Identifier (EvtID) to the QM_EVTSEL register and then
reading the event data from the QM_CTR register.
In ABMC mode, the event data of a specific counter ID is read by setting the
following fields: QM_EVTSEL.ExtendedEvtID = 1, QM_EVTSEL.EvtID = L3CacheABMC
(=1) and setting QM_EVTSEL.RMID to the desired counter ID. Reading the QM_CTR
then returns the contents of the specified counter ID. RMID_VAL_ERROR bit is
set if the counter configuration is invalid, or if an invalid counter ID is
set in the QM_EVTSEL.RMID field. RMID_VAL_UNAVAIL bit is set if the counter
data is unavailable.
Introduce resctrl_arch_reset_cntr() and resctrl_arch_cntr_read() to reset and
read event data for a specific counter.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
resctrl_arch_rmid_read() adjusts the value obtained from MSR_IA32_QM_CTR to
account for the overflow for MBM events and apply counter scaling for all the
events. This logic is common to both reading an RMID and reading a hardware
counter directly.
Refactor the hardware value adjustment logic into get_corrected_val() to
prepare for support of reading a hardware counter.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The ABMC feature allows users to assign a hardware counter to an RMID,
event pair and monitor bandwidth usage as long as it is assigned. The
hardware continues to track the assigned counter until it is explicitly
unassigned by the user.
Implement an x86 architecture-specific handler to configure a counter. This
architecture specific handler is called by resctrl fs when a counter is
assigned or unassigned as well as when an already assigned counter's
configuration should be updated. Configure counters by writing to the
L3_QOS_ABMC_CFG MSR, specifying the counter ID, bandwidth source (RMID),
and event configuration.
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
The ABMC feature allows users to assign a hardware counter to an RMID,
event pair and monitor bandwidth usage as long as it is assigned. The
hardware continues to track the assigned counter until it is explicitly
unassigned by the user.
The ABMC feature implements an MSR L3_QOS_ABMC_CFG (C000_03FDh).
ABMC counter assignment is done by setting the counter id, bandwidth
source (RMID) and bandwidth configuration.
Attempts to read or write the MSR when ABMC is not enabled will result
in a #GP(0) exception.
Introduce the data structures and definitions for MSR L3_QOS_ABMC_CFG
(0xC000_03FDh):
=========================================================================
Bits Mnemonic Description Access Reset
Type Value
=========================================================================
63 CfgEn Configuration Enable R/W 0
62 CtrEn Enable/disable counting R/W 0
61:53 – Reserved MBZ 0
52:48 CtrID Counter Identifier R/W 0
47 IsCOS BwSrc field is a CLOSID R/W 0
(not an RMID)
46:44 – Reserved MBZ 0
43:32 BwSrc Bandwidth Source R/W 0
(RMID or CLOSID)
31:0 BwType Bandwidth configuration R/W 0
tracked by the CtrID
==========================================================================
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
[ bp: Touchups. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
Add the functionality to enable/disable the AMD ABMC feature.
The AMD ABMC feature is enabled by setting enabled bit(0) in the
L3_QOS_EXT_CFG MSR. When the state of ABMC is changed, the MSR needs to be
updated on all the logical processors in the QOS Domain.
Hardware counters will reset when ABMC state is changed.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
ABMC feature details are reported via CPUID Fn8000_0020_EBX_x5.
Bits Description
15:0 MAX_ABMC Maximum Supported Assignable Bandwidth
Monitoring Counter ID + 1
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
Detect the feature and number of assignable counters supported. For backward
compatibility, upon detecting the assignable counter feature, enable the
mbm_total_bytes and mbm_local_bytes events that users are familiar with as
part of original L3 MBM support.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
The cache allocation and memory bandwidth allocation feature properties are
consolidated into struct resctrl_cache and struct resctrl_membw respectively.
In preparation for more monitoring properties that will clobber the existing
resource struct more, re-organize the monitoring specific properties to also
be in a separate structure.
Also convert "bandwidth sources" terminology to "memory transactions" to have
consistency within resctrl for related monitoring features.
[ bp: Massage commit message. ]
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
There's a rule in computer programming that objects appear zero, once, or many
times. So code accordingly.
There are two MBM events and resctrl is coded with a lot of
if (local)
do one thing
if (total)
do a different thing
Change the rdt_mon_domain and rdt_hw_mon_domain structures to hold arrays of
pointers to per event data instead of explicit fields for total and local
bandwidth.
Simplify by coding for many events using loops on which are enabled.
Move resctrl_is_mbm_event() to <linux/resctrl.h> so it can be used more
widely. Also provide a for_each_mbm_event_id() helper macro.
Cleanup variable names in functions touched to consistently use "eventid" for
those with type enum resctrl_event_id.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
rdt_mon_features is used as a bitmask of enabled monitor events. A monitor
event's status is now maintained in mon_evt::enabled with all monitor events'
mon_evt structures found in the filesystem's mon_event_all[] array.
Remove the remaining uses of rdt_mon_features.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The resctrl file system now has complete knowledge of the status of every
event. So there is no need for per-event function calls to check.
Replace each of the resctrl_arch_is_{event}enabled() calls with
resctrl_is_mon_event_enabled(QOS_{EVENT}).
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
There are currently only three monitor events, all associated with the
RDT_RESOURCE_L3 resource. Growing support for additional events will be easier
with some restructuring to have a single point in file system code where all
attributes of all events are defined.
Place all event descriptions into an array mon_event_all[]. Doing this has the
beneficial side effect of removing the need for rdt_resource::evt_list.
Add resctrl_event_id::QOS_FIRST_EVENT for a lower bound on range checks for
event ids and as the starting index to scan mon_event_all[].
Drop the code that builds evt_list and change the two places where the list is
scanned to scan mon_event_all[] instead using a new helper macro
for_each_mon_event().
Architecture code now informs file system code which events are available with
resctrl_enable_mon_event().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
In the resctrl subsystem's Sub-NUMA Cluster (SNC) mode, the rdt_mon_domain
structure representing a NUMA node relies on the cacheinfo interface
(rdt_mon_domain::ci) to store L3 cache information (e.g., shared_cpu_map)
for monitoring. The L3 cache information of a SNC NUMA node determines
which domains are summed for the "top level" L3-scoped events.
rdt_mon_domain::ci is initialized using the first online CPU of a NUMA
node. When this CPU goes offline, its shared_cpu_map is cleared to contain
only the offline CPU itself. Subsequently, attempting to read counters
via smp_call_on_cpu(offline_cpu) fails (and error ignored), returning
zero values for "top-level events" without any error indication.
Replace the cacheinfo references in struct rdt_mon_domain and struct
rmid_read with the cacheinfo ID (a unique identifier for the L3 cache).
rdt_domain_hdr::cpu_mask contains the online CPUs associated with that
domain. When reading "top-level events", select a CPU from
rdt_domain_hdr::cpu_mask and utilize its L3 shared_cpu_map to determine
valid CPUs for reading RMID counter via the MSR interface.
Considering all CPUs associated with the L3 cache improves the chances
of picking a housekeeping CPU on which the counter reading work can be
queued, avoiding an unnecessary IPI.
Fixes: 328ea68874 ("x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files")
Signed-off-by: Qinyun Tan <qinyuntan@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250530182053.37502-2-qinyuntan@linux.alibaba.com
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation. This is the second step
in the work towards sharing the resctrl filesystem interface, the next
one being plugging ARM's MPAM into the aforementioned fs API.
-----BEGIN PGP SIGNATURE-----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=eNCr
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Carve out the resctrl filesystem-related code into fs/resctrl/ so that
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation.
This is the second step in the work towards sharing the resctrl
filesystem interface, the next one being plugging ARM's MPAM into the
aforementioned fs API"
* tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
MAINTAINERS: Add reviewers for fs/resctrl
x86,fs/resctrl: Move the resctrl filesystem code to live in /fs/resctrl
x86/resctrl: Always initialise rid field in rdt_resources_all[]
x86/resctrl: Relax some asm #includes
x86/resctrl: Prefer alloc(sizeof(*foo)) idiom in rdt_init_fs_context()
x86/resctrl: Squelch whitespace anomalies in resctrl core code
x86/resctrl: Move pseudo lock prototypes to include/linux/resctrl.h
x86/resctrl: Fix types in resctrl_arch_mon_ctx_{alloc,free}() stubs
x86/resctrl: Move enum resctrl_event_id to resctrl.h
x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl
fs/resctrl: Add boiler plate for external resctrl code
x86/resctrl: Add 'resctrl' to the title of the resctrl documentation
x86/resctrl: Split trace.h
x86/resctrl: Expand the width of domid by replacing mon_data_bits
x86/resctrl: Add end-marker to the resctrl_event_id enum
x86/resctrl: Move is_mba_sc() out of core.c
x86/resctrl: Drop __init/__exit on assorted symbols
x86/resctrl: Resctrl_exit() teardown resctrl but leave the mount point
x86/resctrl: Check all domains are offline in resctrl_exit()
x86/resctrl: Rename resctrl_sched_in() to begin with "resctrl_arch_"
...
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
x86 has an array, rdt_resources_all[], of all possible resources.
The for-each-resource walkers depend on the rid field of all
resources being initialised.
If the array ever grows due to another architecture adding a resource
type that is not defined on x86, the for-each-resources walkers will
loop forever.
Initialise all the rid values in resctrl_arch_late_init() before
any for-each-resource walker can be called.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-24-james.morse@arm.com
checkpatch.pl identifies some direct #includes of asm headers that
can be satisfied by including the corresponding <linux/...> header
instead.
Fix them.
No intentional functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-23-james.morse@arm.com
rdt_init_fs_context() sizes a typed allocation using an explicit
sizeof(type) expression, which checkpatch.pl complains about.
Since this code is about to be factored out and made generic, this
is a good opportunity to fix the code to size the allocation based
on the target pointer instead, to reduce the chance of future mis-
maintenance.
Fix it.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-22-james.morse@arm.com
checkpatch.pl complains about some whitespace anomalies in the
resctrl core code.
This doesn't matter, but since this code is about to be factored
out and made generic, this is a good opportunity to fix these
issues and so reduce future checkpatch fuzz.
Fix them.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-21-james.morse@arm.com
Once the filesystem parts of resctrl move to fs/resctrl, it cannot rely
on definitions in x86's internal.h.
Move definitions in internal.h that need to be shared between the
filesystem and architecture code to header files that fs/resctrl can
include.
Doing this separately means the filesystem code only moves between files
of the same name, instead of having these changes mixed in too.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-17-james.morse@arm.com
Add Makefile and Kconfig for fs/resctrl. Add ARCH_HAS_CPU_RESCTRL
for the common parts of the resctrl interface and make X86_CPU_RESCTRL
select this.
Adding an include of asm/resctrl.h to linux/resctrl.h allows the
/fs/resctrl files to switch over to using this header instead.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-16-james.morse@arm.com
trace.h contains all the tracepoints. After the move to /fs/resctrl, some
of these will be left behind. All the pseudo_lock tracepoints remain part
of the architecture. The lone tracepoint in monitor.c moves to /fs/resctrl.
Split trace.h so that each C file includes a different trace header file.
This means the trace header files are not modified when they are moved.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-14-james.morse@arm.com
MPAM platforms retrieve the cache-id property from the ACPI PPTT table.
The cache-id field is 32 bits wide. Under resctrl, the cache-id becomes
the domain-id, and is packed into the mon_data_bits union bitfield.
The width of cache-id in this field is 14 bits.
Expanding the union would break 32bit x86 platforms as this union is
stored as the kernfs kn->priv pointer. This saved allocating memory
for the priv data storage.
The firmware on MPAM platforms have used the PPTT cache-id field to
expose the interconnect's id for the cache, which is sparse and uses
more than 14 bits. Use of this id is to enable PCIe direct cache
injection hints. Using this feature with VFIO means the value provided
by the ACPI table should be exposed to user-space.
To support cache-id values greater than 14 bits, convert the
mon_data_bits union to a structure. These are shared between control
and monitor groups, and are allocated on first use. The list of
allocated struct mon_data is free'd when the filesystem is umount()ed.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-13-james.morse@arm.com
The resctrl_event_id enum gives names to the counter event numbers on x86.
These are used directly by resctrl.
To allow the MPAM driver to keep an array of these the size of the enum
needs to be known.
Add a 'num_events' enum entry which can be used to size an array. This is
added to the enum to reduce conflicts with another series, which in turn
requires get_arch_mbm_state() to have a default case.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-12-james.morse@arm.com
is_mba_sc() is defined in core.c, but has no callers there. It does not access
any architecture private structures.
Move this to rdtgroup.c where the majority of callers are. This makes the move
of the filesystem code to /fs/ cleaner.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-11-james.morse@arm.com
Because ARM's MPAM controls are probed using MMIO, resctrl can't be
initialised until enough CPUs are online to have determined the system-wide
supported num_closid. Arm64 also supports 'late onlined secondaries', where
only a subset of CPUs are online during boot.
These two combine to mean the MPAM driver may not be able to initialise
resctrl until user-space has brought 'enough' CPUs online.
To allow MPAM to initialise resctrl after __init text has been free'd, remove
all the __init markings from resctrl.
The existing __exit markings cause these functions to be removed by the linker
as it has never been possible to build resctrl as a module. MPAM has an error
interrupt which causes the driver to reset and disable itself. Remove the
__exit markings to allow the MPAM driver to tear down resctrl when an error
occurs.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-10-james.morse@arm.com
resctrl_exit() was intended for use when the 'resctrl' module was unloaded.
resctrl can't be built as a module, and the kernfs helpers are not exported so
this is unlikely to change. MPAM has an error interrupt which indicates the
MPAM driver has gone haywire. Should this occur tasks could run with the wrong
control values, leading to bad performance for important tasks. In this
scenario the MPAM driver will reset the hardware, but it needs a way to tell
resctrl that no further configuration should be attempted.
In particular, moving tasks between control or monitor groups does not
interact with the architecture code, so there is no opportunity for the arch
code to indicate that the hardware is no-longer functioning.
Using resctrl_exit() for this leaves the system in a funny state as resctrl is
still mounted, but cannot be un-mounted because the sysfs directory that is
typically used has been removed. Dave Martin suggests this may cause systemd
trouble in the future as not all filesystems can be unmounted.
Add calls to remove all the files and directories in resctrl, and remove the
sysfs_remove_mount_point() call that leaves the system in a funny state. When
triggered, this causes all the resctrl files to disappear. resctrl can be
unmounted, but not mounted again.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-9-james.morse@arm.com
resctrl_exit() removes things like the resctrl mount point directory
and unregisters the filesystem prior to freeing data structures that
were allocated during resctrl_init().
This assumes that there are no online domains when resctrl_exit() is
called. If any domain were online, the limbo or overflow handler could
be scheduled to run.
Add a check for any online control or monitor domains, and document that
the architecture code is required to offline all monitor and control
domains before calling resctrl_exit().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-8-james.morse@arm.com
resctrl_sched_in() loads the architecture specific CPU MSRs with the
CLOSID and RMID values. This function was named before resctrl was
split to have architecture specific code, and generic filesystem code.
This function is obviously architecture specific, but does not begin
with 'resctrl_arch_', making it the odd one out in the functions an
architecture needs to support to enable resctrl.
Rename it for consistency. This is purely cosmetic.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-7-james.morse@arm.com
Resctrl allocates and finds free CLOSID values using the bits of a u32.
This restricts the number of control groups that can be created by
user-space.
MPAM has an architectural limit of 2^16 CLOSID values, Intel x86 could
be extended beyond 32 values. There is at least one MPAM platform which
supports more than 32 CLOSID values.
Replace the fixed size bitmap with calls to the bitmap API to allocate
an array of a sufficient size.
ffs() returns '1' for bit 0, hence the existing code subtracts 1 from
the index to get the CLOSID value. find_first_bit() returns the bit
number which does not need adjusting.
[ morse: fixed the off-by-one in the allocator and the wrong not-found
value. Removed the limit. Rephrase the commit message. ]
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-6-james.morse@arm.com
With the lack of cpumask_any_andnot_but(), cpumask_any_housekeeping()
has to abuse cpumask_nth() functions.
Update cpumask_any_housekeeping() to use the new cpumask_any_but()
and cpumask_any_andnot_but(). These two functions understand
RESCTRL_PICK_ANY_CPU, which simplifies cpumask_any_housekeeping()
significantly.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-5-james.morse@arm.com
The third argument in wrmsr(msr, low, 0) is unnecessary. Instead, use
wrmsrq(msr, low), which automatically sets the higher 32 bits of the
MSR value to 0.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-15-xin@zytor.com
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
__wrmsr() is the lowest level MSR write API, with native_wrmsr()
and native_wrmsrq() serving as higher-level wrappers around it:
#define native_wrmsr(msr, low, high) \
__wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
__wrmsr((msr), (u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
However, __wrmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __wrmsr()
uses to native_wrmsr{,q}() to ensure consistent usage. Later,
these APIs can be renamed to better reflect their implications,
such as native or pvops, with or without trace, and safe or
non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-8-xin@zytor.com
Functions offer type safety and better readability compared to macros.
Additionally, always inline functions can match the performance of
macros. Converting the rdpmc() macro into an always inline function
is simple and straightforward, so just make the change.
Moreover, the read result is now the returned value, further enhancing
readability.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-6-xin@zytor.com
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
Since
741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
a helper rdt_kn_name() that checks that rdtgroup_mutex is held has been used
for all accesses to the kernfs node name.
rdtgroup_mkdir() uses the name to determine if a valid monitor group is being
created by checking the parent name is "mon_groups". This is done without
holding rdtgroup_mutex, and now triggers the following warning:
| WARNING: suspicious RCU usage
| 6.15.0-rc1 #4465 Tainted: G E
| -----------------------------
| arch/x86/kernel/cpu/resctrl/internal.h:408 suspicious rcu_dereference_check() usage!
[...]
| Call Trace:
| <TASK>
| dump_stack_lvl
| lockdep_rcu_suspicious.cold
| is_mon_groups
| rdtgroup_mkdir
| kernfs_iop_mkdir
| vfs_mkdir
| do_mkdirat
| __x64_sys_mkdir
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
Creating a control or monitor group calls mkdir_rdt_prepare(), which uses
rdtgroup_kn_lock_live() to take the rdtgroup_mutex.
To avoid taking and dropping the lock, move the check for the monitor group
name and position into mkdir_rdt_prepare() so that it occurs under
rdtgroup_mutex. Hoist is_mon_groups() earlier in the file.
[ bp: Massage. ]
Fixes: 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250407124637.2433230-1-james.morse@arm.com
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Each of get_{mon,ctrl}_domain_from_cpu() only has one caller.
Once the filesystem code is moved to /fs/, there is no equivalent to
core.c.
Move these functions to each live next to their caller. This allows
them to be made static and the header file entries to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-31-james.morse@arm.com
get_config_index() is used by the architecture specific code to map
a CLOSID+type pair to an index in the configuration arrays.
MPAM needs to do this too to preserve the ABI to user-space, there is no
reason to do it differently.
Move the helper to a header file to allow all architectures that either
use or emulate CDP to use the same pattern of CLOSID values. Moving
this to a header file means it must be marked inline, which matches
the existing compiler choice for this static function.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-30-james.morse@arm.com
Now that the visibility of throttle_mode is being managed by resctrl, it
should consider resources other than MBA that may have a throttle_mode. SMBA
is one such resource.
Extend thread_throttle_mode_init() to check SMBA for a throttle_mode.
Adding support for multiple resources means it is possible for a platform with
both MBA and SMBA, but an undefined throttle_mode on one of them to make the
file visible.
Add the 'undefined' case to rdt_thread_throttle_mode_show().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-29-james.morse@arm.com
resctrl_file_fflags_init() is called from the architecture specific code to
make the 'thread_throttle_mode' file visible. The architecture specific code
has already set the membw.throttle_mode in the rdt_resource.
This forces the RFTYPE flags used by resctrl to be exposed to the architecture
specific code.
This doesn't need to be specific to the architecture, the throttle_mode can be
used by resctrl to determine if the 'thread_throttle_mode' file should be
visible. This allows the RFTYPE flags to be private to resctrl.
Add thread_throttle_mode_init(), and use it to call resctrl_file_fflags_init()
from resctrl_init(). This avoids publishing an extra function between the
architecture and filesystem code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-28-james.morse@arm.com
resctrl_arch_pseudo_lock_fn() has architecture specific behaviour,
and takes a struct rdtgroup as an argument.
After the filesystem code moves to /fs/, the definition of struct
rdtgroup will not be available to the architecture code.
The only reason resctrl_arch_pseudo_lock_fn() wants the rdtgroup is
for the CLOSID. Embed that in the pseudo_lock_region as a closid,
and move the definition of struct pseudo_lock_region to resctrl.h.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-27-james.morse@arm.com
prefetch_disable_bits is set by rdtgroup_locksetup_enter() from a value
provided by the architecture, but is largely read by other architecture
helpers.
Make resctrl_arch_get_prefetch_disable_bits() set prefetch_disable_bits so
that it can be isolated to arch-code from where the other arch-code helpers
can use its cached value.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-26-james.morse@arm.com
Babu Moger