The dce100_validate_global function was verbatim exactly the
same as dce60_validate_global and dce80_validate_global.
Share dce100_validate_global between DCE6-10 to save code size.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE6-8 have very similar capabilities to DCE10, they support the
same DP and HDMI versions and work similarly.
Share dce100_validate_bandwidth between DCE6-10 to reduce code
duplication in the DC driver.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject modes with a pixel clock higher than the maximum display
clock. Use 400 MHz as a fallback value when the maximum display
clock is not known. Pixel clocks that are higher than the display
clock just won't work and are not supported.
With the addition of the YUV422 fallback, DC can now accidentally
select a mode requiring higher pixel clock than actually supported
when the DP version supports the required bandwidth but the clock
is otherwise too high for the display engine. DCE 6-10 don't
support these modes but they don't have a bandwidth calculation
to reject them properly.
Fixes: db291ed173 ("drm/amd/display: Add fallback path for YCBCR422")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The main reason common modes are added is for compatibility with
clone mode when a laptop is connected to a projector or external
monitor. Since commit 978fa2f6d0 ("drm/amd/display: Use scaling
for non-native resolutions on eDP") when non-native modes are picked
for eDP the GPU scalar will be used. This is because it is inconsistent
whether eDP panels have the capability to actually drive non-native
resolutions. With panels connected to other connectors this limitation
generally doesn't exist as we the EDID will advertise support for a
number of resolutions and monitors will use built in scaling hardware.
Comparing DC and non-DC code paths the non-DC code path only adds
common modes for LVDS and eDP whereas the DC codepath does it for
all connector types.
In the past there was an experiment done to disable common mode adding
for eDP and LVDS from commit 6d396e7ac1 ("drm/amd/display: Disable
common modes for LVDS") and commit 7948afb46a ("drm/amd/display:
Disable common modes for eDP") but this was reverted in
commit a8b79b0918 ("drm/amd: Re-enable common modes for eDP and
LVDS") because it caused problems with Xorg.
[How]
Only add common modes for eDP and LVDS for DC, matching the behavior
of non-DC.
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250924161624.1975819-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove this flag as the driver stopped managing it individually since
commit a4056c2a63 ("drm/amd/display: use HW hdr mult for brightness
boost"). After some back and forth it was reintroduced as a condition to
`set_output_transfer_func()` in [1]. Without direct management, this
flag only changes value when all surface update flags are set true on
UPDATE_TYPE_FULL with no output TF status meaning.
Fixes: bb622e0c00 ("drm/amd/display: program output tf when required") [1]
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the previous O(N^2) implementation of remove_duplicates() with
a O(N) version using a fast/slow pointer approach. The new version
keeps only the first occurrence of each element and compacts the array
in place, improving efficiency without changing functionality.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't update DC stream color components during atomic check. The driver
will continue validating the new CRTC color state but will not change DC
stream color components. The DC stream color state will only be
programmed at commit time in the `atomic_setup_commit` stage.
It fixes gamma LUT loss reported by KDE users when changing brightness
quickly or changing Display settings (such as overscan) with nightlight
on and HDR. As KWin can do a test commit with color settings different
from those that should be applied in a non-test-only commit, if the
driver changes DC stream color state in atomic check, this state can be
eventually HW programmed in commit tail, instead of the respective state
set by the non-blocking commit.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use `atomic_commit_setup` to change the DC stream state. It's a
preparation to remove from `atomic_check` changes in CRTC color
components of DC stream state and prevent DC to commit TEST_ONLY
changes.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We did not initialize dc clocks with boot-time hw values during init.
This lead to incorrect clock values in dc, causing `dcn35_update_clocks`
to make incorrect updates.
[How]
Correctly initialize DC with pre-os clk values from HW.
s/dump/save/ as that accurately reflects the purpose of the functions.
Fixes: 8774029f76 ("drm/amd/display: Add DCN35 CLK_MGR")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need consider SSC enabled case
This reverts commit f1fd8a9ac2.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current driver will cache the dispclk right after send cmd to pmfw,
but actual clock not reached yet.
Change to only cache the dispclk setting after HW reached to the real clock.
Also give some range as it might be in bypass clock setting.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
This is a redundant field that is identically to optimized_required, so
just replace it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
When stutter is disabled prior to watermark programming due to a w/a,
wm_pending should be returned as true.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add new tracing and performance measurements for SMU messaging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
SMU interfaces are not backwards and forwards compatible, so they should
be isolated per version.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We need to inform DMUB whether fast sync in ultra sleep mode is supported,
so that it can disable desync error detection when the it is not enabled.
This helps prevent unexpected desync errors when transitioning out of
ultra sleep mode.
Add fast sync in ultra sleep mode field in replay copy setting command.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Allen Li <wei-guang.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Modifications in per asic capability means mpc.preblend flag should be used
to indicate preblend. Update relevant paths to use this flag.
Fixes: 3992305061 ("drm/amd/display: Clear DPP 3DLUT Cap")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Call power gating routine only if it is defined.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Right now, only selected APUs have enabled DTM v3, which allows to use
newer firmware for content protection.
We want to enable it on the dGPUs starting with DCN 3.2
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0 until the first update clocks.
In some cases, OS changes the timing in the second set mode
(lower the pixel clock), causing the driver to lower the dispclk
in prepare bandwidth, which is illegal and causes grey screen.
[How]
1. Dump and save the vbios's clocks, and init the dispclk in
dcn314_init_clocks.
2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the first data point for a custom brightness curve is not 0% luminance
then the first few luminance values will be ignored.
[How]
Check signal is below first data point and if so do linear interpolation to
0 instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
According to the vendor’s requirement, after each OUI write,
the PSR cap must be read; otherwise, the vendor will default
to using PSRSU. But its PSR cap indicates that it only supports
PSR1.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Ensure AVI infoframe updates from stream updates are applied to the active
stream so OS overrides are not lost.
[HOW]
Copy avi_infopacket to stream when valid flag is set.
Follow existing infopacket copy pattern and perform a basic validity check before assignment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
dc_post_update_surfaces_to_stream needs to be called after a full update
completes in order to optimize clocks and watermarks for power. Add
missing calls before idle entry is requested to ensure optimal power.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Reprogramming watermarks with stutter allowed can cause instability on
some ASICs. Disable it prior to raising watermarks (prepare bandwidth),
then re-enable after lowering (optimize bandwidth).
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces the utilization of i2c_add/del_adapter() with
devm_i2c_add_adapter() to reduce the amount of boilerplate. Using
devm_i2c_add_adapter() has the advantage of removing the manual
manipulation of the I2C adapter.
Suggested-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documentation/process/deprecated.rst recommends against the use of kmalloc
with dynamic size calculations due to the risk of overflow and smaller
allocation being made than the caller was expecting. This could lead to
buffer overflow in code similar to the memcpy in
amdgpu_dm_plane_add_modifier().
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VUPDATE interrupt isn't registered on DCE 6, so don't try
to use that.
This fixes a page flip timeout after sleep/resume on DCE 6.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE 6 was not advertised as being able to support VRR,
so let's mark it as unsupported for now.
The VRR implementation in amdgpu_dm depends on the VUPDATE
interrupt which is not registered for DCE 6.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It already didn't work on DCE 8,
so there is no reason to assume it would on DCE 6.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dml21_map_dc_state_into_dml_display_cfg calls (the call is usually
inlined by the compiler) populate_dml21_surface_config_from_plane_state
and populate_dml21_plane_config_from_plane_state which may use FPU. In
a x86-64 build:
$ objdump --disassemble=dml21_map_dc_state_into_dml_display_cfg \
> drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.o |
> grep %xmm -c
63
Thus it needs to be guarded with DC_FP_START. But we must note that the
current code quality of the in-kernel FPU use in AMD dml2 is very much
problematic: we are actually calling DC_FP_START in dml21_wrapper.c
here, and this translation unit is built with CC_FLAGS_FPU. Strictly
speaking this does not make any sense: with CC_FLAGS_FPU the compiler is
allowed to generate FPU uses anywhere in the translated code, perhaps
out of the DC_FP_START guard. This problematic pattern also occurs in
at least dml2_wrapper.c, dcn35_fpu.c, and dcn351_fpu.c. Thus we really
need a careful audit and refactor for the in-kernel FPU uses, and this
patch is simply whacking a mole. However per the reporter, whacking
this mole is enough to make a 9060XT "just work."
Reported-by: Asiacn <710187964@qq.com>
Closes: https://github.com/loongson-community/discussions/issues/102
Tested-by: Asiacn <710187964@qq.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC can turn off the display clock when no displays are connected
or when all displays are off, for reference see:
- dce*_validate_bandwidth
DC also assumes that the DP clock is always on and never powers
it down, for reference see:
- dce110_clock_source_power_down
In case of DCE 6.0 and 6.4, PLL0 is the clock source for both
the engine clock and DP clock, for reference see:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Therefore, PLL0 should be always kept running on DCE 6.0 and 6.4.
This commit achieves that by ensuring that by setting the display
clock to the corresponding value in low power state instead of
zero.
This fixes a page flip timeout on SI with DC which happens when
all connected displays are blanked.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the EDID has the HDMI bit, we should simply select
the HDMI signal type even on DVI ports.
For reference see, the legacy amdgpu display code:
amdgpu_atombios_encoder_get_encoder_mode
which selects ATOM_ENCODER_MODE_HDMI for the same case.
This commit fixes DVI connectors to work with DVI-D/HDMI
adapters so that they can now produce output over these
connectors for HDMI monitors with higher bandwidth modes.
With this change, even HDMI audio works through DVI.
For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter
with the following GPUs:
Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI
Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following updates:
- Add DSC padding for OVT support
- Setup pixel encoding for YCBCR422
- Fix dml ms order
- Rename header file link.h to link_service.h
- Fix DMUB loading sequence
- Modify link training policy
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1cf1205ef2 ("drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4")
Reason for revert: Causes DP compliance errors
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Certain OVT timings require DSC configurations which divide the
horizontal active unevenly across DSC slices
-DSC slices must be even, so padding needs to be added to the active
to make this possible
-The pixel clock of the HW now needs to be increased to accommodate
the extra padded pixels
-To keep the line time the same, the blank of the HW timing needs to
be increased as well
[How]
-Calculate h_active padding, h_total padding, and pixel clock based
off of the original OVT timing and DSC calculations
-Store these values in the pipe and program HW with these modifications
-Added general support for cases where DSC slice config does not evenly
split the horizontal active by fixing some slice width calculations
-Updated PPS calculations for these cases
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP validation may fail with multiple displays and higher color depths.
The sink may support others though.
[How]
When DP bandwidth validation fails, progressively fallback through:
- YUV422 8bpc (bandwidth efficient)
- YUV422 6bpc (reduced color depth)
- YUV420 (last resort)
This resolves cases where displays would show no image due to insufficient
DP link bandwidth for the requested RGB mode.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
fill_stream_properties_from_drm_display_mode() will not configure pixel
encoding to YCBCR422 when the DRM color format supports YCBCR422 but not
YCBCR420 or YCBCR4444. Instead it will fallback to RGB.
[How]
Add support for YCBCR422 in pixel encoding mapping.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
small error in order of operations in immediateflipbytes
calculation on dml ms side that can result in dml ms
and mp mismatch immediateflip support for a given pipe
and thus an invalid hw state, correct the order to align
with mp.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
some log are for dGPU only.
Added check to limit log.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936,
SMU hang can occur if the interrupts are not enabled appropriately,
causing a vblank timeout.
This patch reverts commit 5009628d85 ("drm/amd/display: Remove unnecessary
amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the
issue was observed.
This will re-enable interrupts regardless of whether the user space needed
it or not.
Fixes: 5009628d85 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936
Suggested-by: Sun peng Li <sunpeng.li@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Header file name "link.h" collides with system header when dc is
compiled as a user-mode library
[WHAT]
Rename link.h to link_service.h to avoid name collision
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New sequence from HW for reset and firmware reloading has been
provided that aims to stabilize the reload sequence in the case the
firmware is hung or has outstanding requests.
[How]
Update the sequence to remove the DMUIF reset and the redundant
writes in the release.
Reviewed-by: Sreeja Golui <sreeja.golui@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
prepare dml 2.1 for new asic
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Currently fallback to low link rate if the link training
fails once on USB4. It may cause the bandwidth couldn't
satisfy the requirement of streams. Modify the policy
to do training retry in the previous few times, only
do fallback at the last time.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf