[Why & How]
According to the vendor’s requirement, after each OUI write,
the PSR cap must be read; otherwise, the vendor will default
to using PSRSU. But its PSR cap indicates that it only supports
PSR1.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the EDID has the HDMI bit, we should simply select
the HDMI signal type even on DVI ports.
For reference see, the legacy amdgpu display code:
amdgpu_atombios_encoder_get_encoder_mode
which selects ATOM_ENCODER_MODE_HDMI for the same case.
This commit fixes DVI connectors to work with DVI-D/HDMI
adapters so that they can now produce output over these
connectors for HDMI monitors with higher bandwidth modes.
With this change, even HDMI audio works through DVI.
For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter
with the following GPUs:
Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI
Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1cf1205ef2 ("drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4")
Reason for revert: Causes DP compliance errors
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Certain OVT timings require DSC configurations which divide the
horizontal active unevenly across DSC slices
-DSC slices must be even, so padding needs to be added to the active
to make this possible
-The pixel clock of the HW now needs to be increased to accommodate
the extra padded pixels
-To keep the line time the same, the blank of the HW timing needs to
be increased as well
[How]
-Calculate h_active padding, h_total padding, and pixel clock based
off of the original OVT timing and DSC calculations
-Store these values in the pipe and program HW with these modifications
-Added general support for cases where DSC slice config does not evenly
split the horizontal active by fixing some slice width calculations
-Updated PPS calculations for these cases
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Header file name "link.h" collides with system header when dc is
compiled as a user-mode library
[WHAT]
Rename link.h to link_service.h to avoid name collision
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Currently fallback to low link rate if the link training
fails once on USB4. It may cause the bandwidth couldn't
satisfy the requirement of streams. Modify the policy
to do training retry in the previous few times, only
do fallback at the last time.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Extend to read eDP general capability 2 in detect_edp_sink_caps().
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Allen Li <wei-guang.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add the link index in DP AUX transfer and DPMS functions.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false" or
"a ? false : true", if 'a' itself returns a boolean result, the ternary
operator can be omitted. Remove redundant ternary operators to clean up the
code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To change PSR/Replay behavior based on OS preferences, add some
config options.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust whitespace around operators to improve code readability
and comply with kernel coding style guidelines.
These changes are purely stylistic and introduce no
functional modifications.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Change ACDS period to support LTTPR.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Duncan Ma <Duncan.Ma@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In the worst case, AUX intra-hop done can take hundreds of milliseconds as
each retimer in a link might have to wait a full AUX_RD_INTERVAL to send
LT abort downstream.
[HOW]
Wait 300ms for each retimer in a link to allow time to propagate a LT abort
without infinitely waiting on intra-hop done.
For no-retimer case, keep the max duration at 10ms.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add AUX-less ALPM capability check and initialization
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Duncan Ma <Duncan.Ma@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If symclk RCO is enabled, stream encoder may not be receiving an ungated
clock by the time we attempt to set stream attributes when setting dpms
on. Since the clock is gated, register writes to the stream encoder fail.
[HOW]
Move set_stream_attribute call into enable_stream, just after the point
where symclk32_se is ungated.
Logically there is no need to set stream attributes as early as is
currently done in link_set_dpms_on, so this should have no impact beyond
the RCO fix.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Link hpd_status is for embedded DPIA only.
Do not check hpd_status for BW allocation logic.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function `dp_retrain_link_dp_test` currently allocates a large
audio_output array on the stack, causing the stack frame size to exceed
the compiler limit (1080 bytes > 1024 bytes).
This change prevents stack overflow issues:
amdgpu/../display/dc/link/accessories/link_dp_cts.c:65:13: warning: stack frame size (1080) exceeds limit (1024) in 'dp_retrain_link_dp_test' [-Wframe-larger-than]
static void dp_retrain_link_dp_test(struct dc_link *link,
v2: Move audio-related data like `audio_output` is kept "per pipe" to
manage the audio for that specific display pipeline/display output path
(stream). (Wenjing)
v3: Update in all the places where `build_audio_output` is currently
called with a separate audio_output variable on the stack & wherever
`audio_output` is passed to other functions
`dce110_apply_single_controller_ctx_to_hw()` &
`dce110_setup_audio_dto()` (like `az_configure`, `wall_dto_setup`)
replace with usage of `pipe_ctx->stream_res.audio_output`
to centralize audio data per pipe.
v4: Remove empty lines before `build_audio_output`. (Alex)
Fixes: 9c6669c2e2 ("drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPO")
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: George Shen <george.shen@amd.com>
Cc: Michael Strauss <michael.strauss@amd.com>
Cc: Alvin Lee <Alvin.Lee2@amd.com>
Cc: Ray Wu <ray.wu@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commits:
commit 1f26214d26 ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b10 ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SmartMux is a mechanism to switch the GPU being used for scanout in a
hybrid configuration. This is used for devices with an eDP and two GPUs.
This is only valid when the system has a physical switch (Multiplexer)
in the board to switch between the two GPUs.
When a graphically intensive workload like a game is being run, the
system can be switch the active display to the dGPU, so that we can
avoid copying the buffer from dGPU to APU for scanout. This helps with
latency and FPS. When power consumption is preferred, the system can be
switched to the APU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For SQ128 pattern some vendor-specific overrides are required.
Previously a hardcoded clock gen source value was incorrectly programmed,
causing our override to retimer's clock source override to be ignored.
Due to some PHY issues on certain APU programs, we see failures on retimer
bypass ports extend to electrical testing downstream of PHY due to some host
clock jitter which the retimer follows.
[HOW]
Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When performing certain link maintenance compliance tests or forcing link
settings, changing between 128b/132b and 8b/10b rates no longer works on
some ASICs. Some rate divider updates only occur when we set
timings or validate state, which is not performed currently when toggling
DPMS to change rates.
[HOW]
Re-calculate dividers and reprogram audio when switching between DIO
and HPO through DP compliance/escape code path.
Add OTG disable/re-enable so we don't touch the clock while OTG is active.
Acquire dcLock before forcing link settings to avoid thread synchronization
errors due to added programming in escape code path and potential HPD
interrupts.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The tunnel BW validation code has changed to the new one.
Remove the unused code.
The DP tunneling overhead is not updated in SST.
Move updating DP tunneling overhead for both SST and MST.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the number of horizontal slices argument to allow configuring clock
based on slice number.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add new function for DP tunnel bandwidth validation.
It uses the estimated BW and allocated BW to validate the timings.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Add a missing compilation unit
* Missing CFLAGS for certain units
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
These fields are read for the explicit purpose of detecting embedded LTTPRs
(i.e. between host ASIC and the user-facing port), and thus need to
calculate the correct DPCD address offset based on LTTPR count to target
the appropriate LTTPR's DPCD register space with these queries.
[HOW]
Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried
via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a
laptop) will always be addressible using the max LTTPR count seen by the
host. Therefore we simply need to use a recently added helper function to
calculate the correct DPCD address to target potentially embedded LTTPRs
based on the received LTTPR count.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The BW zero allocation patch is no longer required.
Add a debug option to enable it in case we encounter an issue.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the case of an external monitor disconnection,
the kernel mode will attempt to post new timing
validation with two path counts (eDP + external
monitor removed to virtual).
[how]
Skip validating color depth and pixel encoding in the
scenario involving a DP to HDMI active converter dongle.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Observe that we try to access DPCD 0x600h of disconnected DP ports.
In order not to wasting time on retrying these ports, call
dpcd_write_rx_power_ctrl() after checking its connection status.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Nits programming for SDR panel is only supported by VESA ABC.
[How]
1. Loose nits programming for OLED SDR panel with AMD ABC.
2. We support two ABC methods. Disable one before we program the other
in case panel freaks out.
3. Update HDR judgement in setBR with a solider condition.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It sent an error msg when it failed to read the DP tunneling DPCD field.
This should just be a warning msg. Use a DC log instead of a DM error msg.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The original code only supports the tunneling for embedded one.
To support external tunneling feature, it needs to check
Tunneling_Support bit register.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Early EQ pattern sequence is required for some LTTPR + old dongle
combinations.
[HOW]
If DP_EARLY_8B10B_TPS2 chip cap is set, this new sequence programs phy
to output TPS2 before initiating link training and writes TPS1 to
LTTPR training pattern register as instructed by vendor.
Add function to get embedded LTTPR target address offset.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When MST config is unplugged/replugged too quickly, it can potentially
result in a scenario where previous DC state has not been reset before
the HPD link detection sequence begins. In this case, driver will
disable the streams/link prior to re-enabling the link for link
training.
There is a bug in the current logic that does not account for the fact
that current_state can be released and cleared prior to swapping to a
new state (resulting in the pipe_ctx stream pointers to be cleared) in
between disabling streams.
To resolve this, cache the original streams prior to committing any
stream updates.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0d93e82186 ("drm/amd/display: turn off eDP lcdvdd and backlight if not required")
Reason for revert: Causes S4 lightup regressions.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Move desync error counter operation up to prevent
it from being skipped by force disable desync
error.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read Request provides alterative method to polling to
the HDMI sinks that support it.
[How]
Implement Read Request where interrupt can be generated
by the sink.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCE6, DCE8, DCE10, DCE11, "hdp" is replaced by "hpd" and
replace "type" by "hpd" for a uniform parameter naming usage across DCEs.
In link_factory.c, there is a missing "p" to "types"
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A+N configuration, eDP on A-APU is off, extended display active.
Resume from s4, eDP's backlight is still on.
[how]
Turn off inactive eDP backlight and lcdvdd.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a temporary scratch dc_link for programming purposes
and fix a copy of pipe_ctx on the stack to a pointer reference.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 15d1c2e6bf.
Reason: Cursor movement causes system to hang.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The response of DP BW allocation is handled in Outbox ISR.
When it failed to request the DP BW allocation, it sent another
DPCD request in Outbox ISR immediately. The DP AUX reply also
uses the Outbox ISR. So, no AUX reply happened in this case.
Change to use HPD IRQ for the notification.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
DP spec has been updated recently to make regulated autonomous mode more
well-defined. In case any PCON vendors choose to implement regulated
autonomous mode in the future, pre-emptively add handling for the
regulated autonomous mode based on current spec.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh