We are currently observing crc failures after we started using dsb for PSR
updates as well. This seems to happen because PSR HW is still sending
couple of updates using old framebuffers on wake-up.
Fix this by adding poll ensuring PSR is idle before starting update.
v2: pass new_crtc_state->dsb_commit to intel_psr_wait_for_idle_dsb
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250905072708.2659411-5-jouni.hogander@intel.com
Mask the ERR_FATAL_MASK before scaler initialization.
After enabling the scaler and waiting for one frame,
unmask the previously masked bits, PS_ECC and
ERR_FATAL_MASK
Unmasking of ERR_FATAL_MASK bit is use for
validation purpose. There is no functional
impact.
v2: Remove intel_display_need_wa[Jani]
Optimize the ecc_unmask call[Animesh]
v3: Add intel_display_wa[Jani]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801125835.2337614-1-nemesa.garg@intel.com
dma_fence_wait_timeout returns a long type but the driver is
only using the lower 32 bits of the retval and discarding the
upper 32 bits.
This is particularly problematic if there are already signalled
or stub fences on some of the hw planes. In this case the
dma_fence_wait_timeout function will immediately return with
timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since
the fence is already signalled. If the driver only uses the lower
32 bits of this return value then it'll interpret it as an error
code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences.
This issue was first observed in the xe driver with the Android
compositor where the GPU composited layer was not properly waited
on when there were stub fences in other overlay planes resulting in
visual artifacts.
Fixes: d59cf7bb73 ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence")
Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com
Implement the driver side of Wa_18034343758, which is supposed to
prevent the DSB and DMC from accessing registers in parallel, and
thus potentially corrupting the registers due to a hardware issue
(which should be fixed in PTL-B0).
The w/a sequence goes as follows:
DMC starts the DSB
| \
DMC halts itself | DSB waits a while for DMC to have time to halt
. | DSB executes normally
. | DSB unhalts the DMC at the very end
. /
DMC resumes execution
v2: PTL-B0+ firmware no longer has the w/a since the hw got fixed
v3: Do the w/a on all PTL for now since we only have the A0 firmware
binaries which issues the halt instructions unconditionally
v4: PTL DMC binaries do in fact have the A0 vs. B0 split, so skip
the w/a on PTL-B0+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-7-ville.syrjala@linux.intel.com
Support commits via the flip queue (as opposed to DSB or MMIO).
As it's somewhat unknown if we can actually use it is currently
gated behind the new use_flipq modparam, which defaults to disabled.
The implementation has a bunch of limitations that would need
real though to solve:
- disabled when PSR is used
- disabled when VRR is used
- color management updates not performed via the flip queue
v2: Don't use flip queue if there is no dmc
v3: Use intel_flipq_supported()
v3: Configure PKG_C_LATENCY appropriately
Ignore INT_VECTOR if there is a real PIPEDMC interrupt
(nothing in the hw appears to clear INT_VECTOR)
v4: Leave added_wake_time=0 when flip queue isn't used, to
avoid needleslly increasing pkg_c_latency on lnl/ptl due
to Wa_22020432604. This is a bit racy though...
Use IS_DISPLAY_VER()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-6-ville.syrjala@linux.intel.com
The current PKG_C_LATENCY stuff looks busted in several ways:
- doesn't account for multiple pipes from different commits
correctly
- WM_LINETIME is in units of 0.125usec, PKG_C_LATENCY wants
units on 1 usec
- weird VRR state stuff being checked
- use of pointless RMW
Fix it all up. Note that it's still a bit unclear how all this
works, especially how the added_wake_time ties into the flipq
triggers in DMC, and how we need to sequence updates to
PKG_C_LATENCY when enabling/disabling pipes/etc. We may also
need to think what to about the WM1+ disabling and the related
PSR chicken bits when we can use PKG_C_LATENCY for early wake...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-5-ville.syrjala@linux.intel.com
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Double Buffered LUT registers can be programmed in the active region.
This patch implements the MMIO path for it. Program the registers after
evading vblank. The HW latches on to the registers after delayed vblank.
It takes around 1024 cdclk cycles(~one scanline) for this.
Following assumptions have been made while making this change
- Current vblank evasion time is sufficient for programming
the LUT registers.
- Current guardband calculation would be sufficient for the HW
to latch on to the new values
v2: move loading LUTs to commit_pipe_post_planes() since a vblank
evasion failure for this is probably less drastic than
for plane programming. (Ville)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-10-chaitanya.kumar.borah@intel.com
With addition of double buffered GAMMA registers in PTL, we can now
program them in the active region. Use GOSUB instruction of DSB to
program them.
It is done in the following steps:
1. intel_color_prepare_commit()
- If the platform supports, prepare a dsb instance (dsb_color)
hooked to DSB0.
- Add all the register write instructions to dsb_color through
the load_lut() hook
- Do not add the vrr_send_push() logic to the buffer as it
should be taken care by dsb_commit instance of DSB0
- Finish preparation of the buffer by aligning it to 64 bit
2. intel_atomic_dsb_finish()
- Add the gosub instruction into the dsb_commit instance of DSB0
using intel_dsb_gosub()
- If needed, add the vrr_send_push() logic to dsb_commit after it
v2: Refactor code to simplify commit completion flow.
Add some helpers along the way (Ville)
v3: s/doubled/double and add display to commit message prefix (Uma)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-9-chaitanya.kumar.borah@intel.com
With double buffer gamma registers in the mix, we need not wait for
vblank to execute gamma writes through dsb. Before we implement
that s/dsb_color_vblank/dsb_color.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-8-chaitanya.kumar.borah@intel.com
Rename intel_<release/reserve>_dpll to
intel_dpll_<release/reserve> in an effort to keep names of
exported functions start with the filename.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-13-suraj.kandpal@intel.com
Rename intel_[enable/disable]_dpll to intel_dpll_[enable/disable]
in an effort to make sure all functions that are exported
start with the filename.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-10-suraj.kandpal@intel.com
Rename crtc_get_shared_dpll to take into the individual PLL framework
which came in at DISPLAY_VER >= 14.
Also having shared dpll stuff also in intel_dpll.c is just confusing.
--v2
-Change naming to dpll_global to keep consistency with rest of the
naming
--v3
-Just use intel_dpll [Jani]
--v4
-Modify commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-9-suraj.kandpal@intel.com
Rename functions to move away from using shared dpll in the dpll
framework as much as possible since dpll may not always be shared.
--v2
-Use intel_dpll_global instead of global_dpll [Jani]
--v3
-Just use intel_dpll [Jani]
--v4
-Drop the global from comments [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-8-suraj.kandpal@intel.com
Rename intel_shared_dpll to intel_dpll to represent both
shared and individual dplls. Since from MTL each PHY has it's
own PLL making the shared PLL naming a little outdated. In an
effort to make this framework accepting of future changes this
needs to be done.
--v2
-Use intel_dpll_global to make sure names start with the filename
[Jani/Ville]
-Explain the need of this rename [Jani]
--v3
-Just keep it intel_dpll [Jani]
--v4
-Fix comment [Jani]
-Use just num_dpll and dplls [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-7-suraj.kandpal@intel.com
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
With users both in i915 core and display, struct drm_device is the
common denominator for the VLV IOSF SB users. Also use drm_device for
the helpers on the display side to keep the static inlines as simple as
possible.
We can drop a number of dependencies on i915_drv.h with this.
v2,v3: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/c1d013ed88ce2e3e5bdc15ce3bf01a3960b1e817.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that all the VLV IOSF SB unit specific helper users are under
display, relocate the helpers themselves under display as
well. Resurrect the vlv_sideband.[ch] name for this. Make everything
except DPIO helpers static inlines, as their implementations are
trivial.
All of this considerably simplifies the xe compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/e86c2498c9f1c1d30f8e83fa5f1c23526b87b9ab.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Factor out helpers that can be used in a follow-up change to query the
minimum and maximum pipe bpp supported by the HW.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-10-imre.deak@intel.com
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
Minimum HBlank is programmed to address jitter for high resolutions with
high refresh rates that have small Hblank, specifically where Hblank is
smaller than one MTP.
TODO: Add the min_hblank calculation for hdmi as well.
v2: move from intel_audio.c to intel_dp.c
some correction in link_bpp_x16 (Imre)
v3: min_hblank for 8b/10b MST and 128b/132b SST/MST
handle error for intel_dp_mst_dsc_get_slice_count
reset min_hblank before disabling transcoder (Imre)
v4: compute link_bpp_x16 within compute_min_hblank,
return error in case of compute failure
call compute_min_hblank() before vrr_compute_config (Imre)
v5: readout MIN_HBLAN reg for Xe3+
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-2-8b002f1506cc@intel.com
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
For every commit the dependent condition for LOBF is checked
and accordingly update has_lobf flag which will be used
to update the ALPM_CTL register during commit.
v1: Initial version.
v2: Avoid reading h/w register without has_lobf check. [Jani]
v3: Update LOBF in post plane update instead of separate function. [Jouni]
v4:
- Add lobf disable print. [Jouni]
- Simplify condition check for enabling/disabling lobf. [Jouni]
v5: Disable LOBF in pre_plane_update(). [Jouni]
v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
This patch is applying workaround for underrun on idle PSR HW issue
(Wa_16025596647) when PSR is getting enabled. It uses vblank enable/disable
status, DC5/6 enabled disabled and enabled pipes count information made
available.
This patch is also adding calls to dc5/dc6, vblank enable/disable and pipe
enable/disable notification functions as needed.
intel_psr_needs_block_dc_vblank is modified to get vblank enable/disable
notification on PSR capable system.
v2: use intel_dmc interface instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-12-jouni.hogander@intel.com
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Going forward, struct intel_display is the main display device data
pointer. Convert the i9xx_wm.h interface to struct intel_display.
With this, we can make intel_wm.c independent of i915_drv.h.
v2: Also remove i915_drv.h, fix commit message
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/3e30634d85c0e0aac9c95f9a2f928131ba400271.1744119460.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that all the sagv computation has been moved from the
skl+ watermark code into intel_bw_atomic_check() there is
no point in calling intel_bw_modeset_checks() before the
wm computation. Hide it within intel_bw_atomic_check().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to use the crtc_state->inherited flag to clean up some
of the early SAGV handling. To make that work nicely I need to
flag even the inactive crtcs as "inherited".
Since we can't expect user space to perform any real commits
on inactive crtcs we'll clear the flag already during
initial_commit().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
For platforms that always use VRR Timing Generator, the VTOTAL.Vtotal
bits are not required. Since the support for these bits is going to
be deprecated in upcoming platforms, avoid writing these bits for the
platforms that do not use legacy Timing Generator.
Since for these platforms vrr.vmin is always filled with crtc_vtotal,
use TRAN_VRR_VMIN to get the vtotal for adjusted_mode.
v2: Avoid having a helper for manipulating VTOTAL register, and instead
just make the change where required. (Ville)
v3: Set crtc_vtotal instead of working with the bits directly (Ville).
Use intel_vrr_vmin_vtotal() to set the vtotal during readout. (Ville)
v4: Keep the reading part unchanged, and let it get overwritten for
cases where we use vrr.vmin. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250327144629.648306-3-ankit.k.nautiyal@intel.com
Introduce a new helper to check transcoder_has_vrr() and use
that to exclude transcoders which do not support VRR.
v2: Include HAS_VRR into the helper. (Ville)
v3: Drop the usage in places where not applicable. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250327144629.648306-2-ankit.k.nautiyal@intel.com
On ILK-IVB only PCH outputs use shared dplls. Move the relevant
intel_disable_shared_dpll() into ilk_pch_post_disable() to make
that clear (and if we extend the dpll mgr to cover all plls we need
different enable/disable points anyway for the PCH vs. CPU eDP cases).
The intel_enable_shared_dpll() counterpart was already in
ilk_pch_enable() anyway, so this is the more symmetric place for the
disable as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we loop over all joined pipes and enable/disable the
shared dplls for each. We don't really have to do that since
all joined pipes will be using the same dpll. So let's just do
the enable/disable once for the whole set of joined pipes.
We can still keep tracking the dpll active set as pipes as long
as we remember to flip the bits for all the joined pipes on one go.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since the vrr.guardband can now change for platforms that always use the
VRR Timing Generator, and it is unsafe to reprogram the guardband on the
fly, move the guardband and pipeline_full checks from the pure !fastboot
path and add a check for intel_vrr_always_use_vrr_tg().
For older platforms the vrr.guardband change happens when VRR Timing
generator is off. For the platforms that always use the VRR Timing
Generator, this will prevent reprogramming the vrr.guardband without a
full modeset. However, this will disrupt LRR functionality for these
platforms.
v2: Modify the check to avoid breaking the LRR on older platform.
(Ville)
v3: Correct the oversight of not removing the lines from the original
location. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-12-ankit.k.nautiyal@intel.com
Jouni Högander