Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
tools/testing/selftests/drivers/net/bonding/Makefile
87951b5664 selftests: bonding: add test for passive LACP mode
c2377f1763 selftests: bonding: add test for LACP actor port priority
Adjacent changes:
drivers/net/ethernet/cadence/macb.h
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
drivers/net/ethernet/cadence/macb_main.c
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move from 2*NUM_QUEUES dma_alloc_coherent() for DMA descriptor rings to
2 calls overall.
Issue is with how all queues share the same register for configuring the
upper 32-bits of Tx/Rx descriptor rings. Taking Tx, notice how TBQPH
does *not* depend on the queue index:
#define GEM_TBQP(hw_q) (0x0440 + ((hw_q) << 2))
#define GEM_TBQPH(hw_q) (0x04C8)
queue_writel(queue, TBQP, lower_32_bits(queue->tx_ring_dma));
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
if (bp->hw_dma_cap & HW_DMA_CAP_64B)
queue_writel(queue, TBQPH, upper_32_bits(queue->tx_ring_dma));
#endif
To maximise our chances of getting valid DMA addresses, we do a single
dma_alloc_coherent() across queues. This improves the odds because
alloc_pages() guarantees natural alignment. Other codepaths (IOMMU or
dev/arch dma_map_ops) don't give high enough guarantees
(even page-aligned isn't enough).
Two consideration:
- dma_alloc_coherent() gives us page alignment. Here we remove this
constraint meaning each queue's ring won't be page-aligned anymore.
- This can save some tiny amounts of memory. Fewer allocations means
(1) less overhead (constant cost per alloc) and (2) less wasted bytes
due to alignment constraints.
Example for (2): 4 queues, default ring size (512), 64-bit DMA
descriptors, 16K pages:
- Before: 8 allocs of 8K, each rounded to 16K => 64K wasted.
- After: 2 allocs of 32K => 0K wasted.
Fixes: 02c958dd34 ("net/macb: add TX multiqueue support for gem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sam9x75
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-4-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tx/rx ring size calculation is somewhat complex and partially hidden
behind a macro. Move that out of the {RX,TX}_RING_BYTES() macros and
macb_{alloc,free}_consistent() functions into neat separate functions.
In macb_free_consistent(), we drop the size variable and directly call
the size helpers in the arguments list. In macb_alloc_consistent(), we
keep the size variable that is used by netdev_dbg() calls.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-3-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MACB driver acts as if TBQPH/RBQPH are configurable on a per queue
basis; this is a lie. A single register configures the upper 32 bits of
each DMA descriptor buffers for all queues.
Concrete actions:
- Drop GEM_TBQPH/GEM_RBQPH macros which have a queue index argument.
Only use MACB_TBQPH/MACB_RBQPH constants.
- Drop struct macb_queue->TBQPH/RBQPH fields.
- In macb_init_buffers(): do a single write to TBQPH and RBQPH for all
queues instead of a write per queue.
- In macb_tx_error_task(): drop the write to TBQPH.
- In macb_alloc_consistent(): if allocations give different upper
32-bits, fail. Previously, it would have lead to silent memory
corruption as queues would have used the upper 32 bits of the alloc
from queue 0 and their own low 32 bits.
- In macb_suspend(): if we use the tie off descriptor for suspend, do
the write once for all queues instead of once per queue.
Fixes: fff8019a08 ("net: macb: Add 64 bit addressing support for GEM")
Fixes: ae1f2a56d2 ("net: macb: Added support for many RX queues")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-2-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RP1 chip has the Cadence GEM block, but wants the tx_clock
to always run at 125MHz, in the same way as sama7g5.
Add the relevant configuration.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20250916081059.3992108-1-svarbanov@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In macb_taprio_setup_replace(), the value of start_time is being
compared against zero which would never be true since start_time
is an unsigned value. Due to this there is a chance that an
incorrect config base time value can be used for computation.
Fix by checking the value of conf->base_time directly.
This issue was reported by static coverity analyzer.
Fixes: 89934dbf16 ("net: macb: Add TAPRIO traffic scheduling support")
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Reviewed-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Link: https://patch.msgid.link/20250901162923.627765-1-chandramohan.explore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macb_start_xmit and macb_tx_poll can be called with bottom-halves
disabled (e.g. from softirq) as well as with interrupts disabled (with
netpoll). Because of this, all other functions taking tx_ptr_lock must
use spin_lock_irqsave.
Fixes: 138badbc21 ("net: macb: use NAPI for TX completion path")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250829143521.1686062-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26 ("idpf: do not linearize big TSO packets")
6c4e684802 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6c ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hw_stats now has only one variable for tx_octets/rx_octets, so we should
only increment p once, not twice. This would cause the statistics to be
reported under the wrong categories in `ethtool -S --all-groups` (which
uses hw_stats) but not `ethtool -S` (which uses ethtool_stats).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: f6af690a29 ("net: cadence: macb: Report standard stats")
Link: https://patch.msgid.link/20250825172134.681861-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When removing a macb device, the driver calls phy_exit() before
unregister_netdev(). This leads to a WARN from kernfs:
------------[ cut here ]------------
kernfs: can not remove 'attached_dev', no directory
WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683
Call trace:
kernfs_remove_by_name_ns+0xd8/0xf0
sysfs_remove_link+0x24/0x58
phy_detach+0x5c/0x168
phy_disconnect+0x4c/0x70
phylink_disconnect_phy+0x6c/0xc0 [phylink]
macb_close+0x6c/0x170 [macb]
...
macb_remove+0x60/0x168 [macb]
platform_remove+0x5c/0x80
...
The warning happens because the PHY is being exited while the netdev
is still registered. The correct order is to unregister the netdev
before shutting down the PHY and cleaning up the MDIO bus.
Fix this by moving unregister_netdev() ahead of phy_exit() in
macb_remove().
Fixes: 8b73fa3ae0 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: luoguangfei <15388634752@163.com>
Link: https://patch.msgid.link/20250818232527.1316-1-15388634752@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit db400061b5.
This commit can cause a Devicetree ABI break for older DTS files that rely this
flag for RMII configuration. Adding this back in ensures that the older
DTBs will not break.
Fixes: db400061b5 ("net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/20250819163236.100680-1-Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'exclude_qbv' bit in the designcfg_debug1 register varies across
MACB/GEM IP revisions, making direct probing unreliable for detecting
QBV support. This patch introduces a capability-based approach for
consistent QBV feature identification across the IP family.
Platform support updates:
- Establish foundation for QBV detection in TAPRIO implementation
- Enable MACB_CAPS_QBV for Xilinx Versal platform configuration
- Fix capability line wrapping, ensuring code stays within 80 columns
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Link: https://patch.msgid.link/20250814071058.3062453-3-vineeth.karumanchi@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate().
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250810-net-round-rate-v1-1-dbb237c9fe5c@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RMII and RGMII can both support internal or external provided
REFCLKs 50MHz and 125MHz respectively. Since this is dependent on
the board that the SoC is on this needs to be set via the device tree.
This property flag is checked in the MACB DT node so the REFCLK cap is
configured the correct way for the RMII or RGMII is configured on the
board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/7f9b65896d6b7b48275bc527b72a16347f8ce10a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the shutdown hook to ensure clean and complete deactivation of
MACB controller. The shutdown sequence is protected with 'rtnl_lock()'
to serialize access and prevent race conditions while detaching and
closing the network device. This ensure a safe transition when the Kexec
utility calls the shutdown hook, facilitating seamless loading and
booting of a new kernel from the currently running one.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Link: https://patch.msgid.link/20250610114111.1708614-1-abin.joseph@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_gpio.h is deprecated. Since there is no of_gpio_x API, drop
unused of_gpio.h. While at here, drop gpio.h and gpio/consumer.h if
no user in driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250320031542.3960381-1-peng.fan@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new stats calculations add several additional calls to
macb/gem_update_stats() and accesses to bp->hw_stats. These are
protected by a spinlock since commit fa52f15c74 ("net: cadence: macb:
Synchronize stats calculations"), which was applied in parallel. Add
some locking now that the net has been merged into net-next.
Fixes: f6af690a29 ("net: cadence: macb: Report standard stats")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250303231832.1648274-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement byte queue limits to allow queuing disciplines to account for
packets enqueued in the ring buffer but not yet transmitted. There are a
separate set of transmit functions for AT91 that I haven't touched since
I don't have hardware to test on.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220164257.96859-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stats calculations involve a RMW to add the stat update to the existing
value. This is currently not protected by any synchronization mechanism,
so data races are possible. Add a spinlock to protect the update. The
reader side could be protected using u64_stats, but we would still need
a spinlock for the update side anyway. And we always do an update
immediately before reading the stats anyway.
Fixes: 89e5785fc8 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report standard statistics using the dedicated callbacks instead of
get_ethtool_stats.
OCTTX is split over two registers. Accumulating these registers
separately in gem_stats just means we need to combine them again later.
Instead, combine these stats before saving them, like is done for
ethtool_stats.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250214212703.2618652-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the existing get_stats implementation to get_stats64. Since we
now report 64-bit values, increase the counters to 64-bits as well.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250214212703.2618652-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Utilize a new helper function rgmii_clock().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-10-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the "mdio" child node directly to `macb_mdiobus_register` to avoid
performing the node lookup twice.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241030085224.2632426-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A boot delay was introduced by commit 79540d133e ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133e ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133e ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per the SAMA5D2 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports:
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241003171941.8814-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20240906144632.404651-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This NIC doesn't have hardware IRQ coalescing. Under high load,
interrupts can adversely affect performance. To mitigate this, enable
software IRQ coalescing by default. On my system this increases receive
throughput with iperf3 from 853 MBit/sec to 934 MBit/s, decreases
interrupts from 69489/sec to 2016/sec, and decreases CPU utilization
from 27% (4x Cortex-A53) to 14%. Latency is not affected (as far as I
can tell).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903184912.4151926-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase max_mtu from 1500 to 1518 bytes when not configured for jumbo
frames. Use 1536 as a starting point as documented in macb.h for
oversized (big) frames, which is the configuration applied in case
jumbo frames capability is not configured; ref. macb_main.c.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Link: https://patch.msgid.link/20240812090657.583821-1-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer()
and later the pointer is dereferenced as ifa->ifa_local.
So, idev->ifa_list must be fetched with rcu_dereference().
Fixes: 0cb8de39a7 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the macb driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://patch.msgid.link/20240730183403.4176544-5-allen.lkml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend wake-on LAN support with an ARP packet.
Currently, if PHY supports WOL, ethtool ignores the modes supported
by MACB. This change extends the WOL modes with MACB supported modes.
Advertise wake-on LAN supported modes by default without relying on
dt node. By default, wake-on LAN will be in disabled state.
Using ethtool, users can enable/disable or choose packet types.
For wake-on LAN via ARP, ensure the IP address is assigned and
report an error otherwise.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When GEM is used as a wake device, it is not mandatory for the RX DMA
to be active. The RX engine in IP only needs to receive and identify
a wake packet through an interrupt. The wake packet is of no further
significance; hence, it is not required to be copied into memory.
By disabling RX DMA during suspend, we can avoid unnecessary DMA
processing of any incoming traffic.
During suspend, perform either of the below operations:
- tie-off/dummy descriptor: Disable unused queues by connecting
them to a looped descriptor chain without free slots.
- queue disable: The newer IP version allows disabling individual queues.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni