Add per key status indication in the WOWLAN status notification.
This update is required for fips. Each key entry now
includes a status field.
Keys are now processed as follows:
0: no key, ignore entry
1: old, use only metadata
2: new, use key material and metadata
While at it, fix tid_offloaded_tx error message to print the
actual variable being validated in iwl_mld_handle_wowlan_info_notif.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.0a2e7a62504c.Id195c9c83f9f767d1e3e458468af2d933774daa1@changeid
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.9f9dc80ab06c.I3eeca8b17abeba6ed30f0d681518c81ede0acf30@changeid
Add iwl_trans_notify_fw_error() and iwl_trans_is_fw_error() for use by
op modes. These helpers provide a clean interface for marking and
checking firmware error state. This hides the trans internal
implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.23f5160b3265.Iba325ffa4c6c6f7fc3a702fb6c1827b0857d0db3@changeid
If iwl_trans_d3_resume succeeded but the hw requested a reset, this will
be indicated to the opmode via the iwl_d3_status parameter while the return
value will be 0.
But the opmode doesn't really care if the resume failed or if a restart
is required. It acts the same in both cases (beside different logs, but
this can be done in iwl_trans_pcie_d3_resume)
This complicates the code for no good reason.
Change the iwl_trans_pcie_d3_resume to return an error value also in the
case that everything went successfully but a restart is required,
and add more logs so we can differentiate between the cases.
This makes iwl_d3_status redundant. Remove it as well.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.5fa2d909c75d.Ida19d8d8d73eddf12b30f1d473ea675f415778b2@changeid
The options to configure a dump file name extension was added for 2
cases:
1. if we dump because of a missed beacon, we added the mac id and type
to the filename.
2. to add the error id of the LMAC/UMAC/TCM/RCM error id to the file
name.
For 1, there is a bug: in cases in which missed beacon will not trigger
a dump (for example in the default preset), and a missed beacon occurred,
and eventually there is a dump for a different reason,
the dump file name will contain the mac type and id even thought the
dump has nothing to do with a missed beacon.
Anyway, both cases are no longer required. Remove the code.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.d97f93fd1147.I7d0b056b6f9c38cafc53a0f29e0cf1236e2d2e8c@changeid
Although the FW knows if a BIGTK was installed and can conclude from
that the beacon protection capability, the specific component
of the FW that is responsible for rekeying while in wowlan, doesn't know
what keys were installed.
So we need to tell that the FW when we go to wowlan, otherwise it will
ignore the BIGTK rekey, if such occurs.
Set this bit when needed.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250821204455.d3968487865e.I784f564ab85f618f26d3f082197a384bb219e07c@changeid
key->icv_len already includes the pn length and the keyidx length.
In fact it is the size of the MMIE, so subtracting it from the overall
length will actually bring us to the beggining of the MMIE and not of
the keyidx inside it.
Also, we also need to consider a 16 byte long MIC.
Fix the code to correctly retrieve the keyidx.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250821204455.e0aea411cd2a.I4220348147541a1478b02389475426047ecf84bc@changeid
We used to lookup the ciphers of the mcast keys, but this was beacuse it
was required for ieee80211_get_rekey_add. Now as this API no longer
needs the cipher as an argument, we can remove the cipher lookups.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250821204455.937cbf5fd26e.I5d92258a9d63a39ee3acb02a72a2af9984993018@changeid
Now as we have iwlmld, which is the op-mode that will be loaded for
EHT capable devices, there is no need for EHT features in iwlmvm.
This change removes:
- The logic of entering and exiting EMLSR
- Link selection
- MLO scan
- relevant Kunit tests
- related debugfs entries
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250821204455.933bb1a12e42.I3d017c30ffc2a29bc12ff0270562bcfb234c0785@changeid
- disable features in fips
- remove RX OMI feature code
- A few fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaIDD4AAKCRDacY7uyt+O
fTbHAQDgvAJIaZHxvaVglMTK8VSYFgT/WcbPL38ZXr9z1aqDTgD/QsGWoaYFJs4P
DtM8+rrBeOq6te6F9keXjl22iTvOpA8=
=sVgx
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2025-07-23' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi feature, notably
- disable features in fips
- remove RX OMI feature code
- A few fixes and cleanups
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
When fips_enabled is set, keys will not be given to the
hardware by mac80211 since the hardware isn't certified.
In this case, various features cannot work correctly as
the firmware needs to handle frames, but it then cannot
since no keys are available.
Disable features:
- WoWLAN since no keys etc.
- MFP since some frames need to be handled in firmware
- EHT/6GHz since MFP is required
Also restrict A-MSDU size since A-MSDUs cannot be split
up by hardware and thus need to fit into the RX buffers
in one piece.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.329fade58a27.I0be27dd329643cc5fdf79a8c8b8f6d2e6fb5c175@changeid
ieee80211_add_gtk_rekey receives a keyconf as an argument, and the
cipher and keylen are taken from there to the new allocated key.
But in rekey, both the cipher and the keylen should be the same as of
the old key, so let ieee80211_add_gtk_rekey find those, so drivers won't
have to fill it in.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250721214922.3c5c023bfae9.Ie6594ae2b4b6d5b3d536e642b349046ebfce7a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs,
but those don't even need the flexible part.
So, we add iwl_tx_cmd_v6_params, that will contain everything except the
flexible array and use this one for the containing structs.
Also, as part of the refactoring remove unused flex array `payload`.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp
[use iwl_tx_cmd_v6_params as described in the changed commit message]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
In iwl_mvm_wowlan_config_rsc_tsc() when calling iwl_mvm_send_cmd_pdu()
we are accidentally passing the size of a pointer rather than the size
of the object pointed by it.
Fix the expression in order to pass the approriate object length.
Fixes: 493681d9f9 ("wifi: iwlwifi: remove support of version 4 of iwl_wowlan_rsc_tsc_params_cmd")
Address-Coverity-ID: 1647627 ("Incorrect expression (SIZEOF_MISMATCH)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250716201911.700-1-antonio@mandelbit.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.
To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
Since the iwlmvm driver now only supports pre-MLO devices,
we no longer need to maintain an extra explicit link ID;
valid MAC IDs and link IDs are both in the range 0-3 and
the driver always has a 1:1 MAC/link correspondence. Thus,
simply use the MAC ID as the link ID as well.
This simplifies some further work because on RX the ID is
given but there is some confusion about which versions of
the firmware report MAC and which report link ID.
While at it, clarify iwl_mvm_handle_missed_beacons_notif()
code a bit so it doesn't look like an invalid vif pointer
is being used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.005aa5fe34fe.Ib0c1187453f46ce49dc0f9f58907ee21f5b52634@changeid
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.10091484e38e.I45daf089189f606f3879ca4538fb46303d761710@changeid
For older APIs, gtk_seq[0].key_id will be set to -1, while other code
assumes that it will always be a valid gtk key idx.
Since the FW does provide the idx for those APIs, simply set it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.2a5a5e4d7b19.Ib795751119070495c0c95526cd36bd7f87594f56@changeid
Add iwl_trans_suppress_cmd_error_once() function to be called by the op
modes instead of directly checking the trans status bits.
This hides the trans internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e061ae241fd3.Ie2043c4e237196ebcfe195006d3d76371de48a55@changeid
Given compatibility issues with external PNVM data that doesn't match
the firmware it was designed with/for, future firmware releases will
include the PNVM data in the firmware files directly, avoiding those
mismatch issues. Make the driver load and use that embedded PNVM data
in preference of external files, falling back to the external file if
it isn't present.
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709081300.c843f77aa2d3.I7200f8dd40ef82aff1f5574fdd3966913cda592c@changeid
Mostly cleanups. A few fixes and small features.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaFuvoQAKCRDacY7uyt+O
fQTbAP4oQVGex+lUgoGukD7pFShDGo73aFcKsXMbS+68N0GA1QEAqIrbt27keWJS
23ceOELgJlTEzECj2sMy3LzCp7/EFwc=
=xlnn
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-next - iwlwifi features
Mostly cleanups. A few fixes and small features.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When iwl_opmode_register() fails, it does not unregster rate control,
which will cause a memory leak issue, this patch fixes it.
Fixes: 9f66a397c8 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://patch.msgid.link/20221109035213.570-1-xiujianfeng@huawei.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Rotem Kerem