5da3d94a23 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).
Issue #1:
To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.
Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.
Issue #2:
The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.
Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.
Fixes: 5da3d94a23 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
The era of hand-rolled HIWORD_UPDATE macros is over.
Like many other Rockchip drivers, pcie-dw-rockchip brings with it its
very own flavour of HIWORD_UPDATE. It's occasionally used without a
constant mask, which complicates matters. HIWORD_UPDATE_BIT is a
confusingly named addition, as it doesn't update the bit, it actually
sets all bits in the value to 1. HIWORD_DISABLE_BIT is similarly
confusing; it disables several bits at once by using the value as a mask
and the inverse of value as the value, and the "disabling only these"
effect comes from the hardware actually using the mask. The more obvious
approach would've been HIWORD_UPDATE(val, 0) in my opinion.
This is part of the motivation why this patch uses hw_bitfield.h's
FIELD_PREP_WM16 instead, where possible. FIELD_PREP_WM16 requires a
constant bit mask, which isn't possible where the irq number is used to
generate a bit mask. For that purpose, we replace it with a more robust
macro than what was there but that should also bring close to zero
runtime overhead: we actually mask the IRQ number to make sure we're not
writing garbage.
For the remaining bits, there also are some caveats. For starters, the
PCIE_CLIENT_ENABLE_LTSSM and PCIE_CLIENT_DISABLE_LTSSM were named in a
manner that isn't quite truthful to what they do. Their modification
actually spans not just the LTSSM bit but also another bit, flipping
only the LTSSM one, but keeping the other (which according to the TRM
has a reset value of 0) always enabled. This other bit is reserved as of
the IP version RK3588 uses at least, and I have my doubts as to whether
it was meant to be set, and whether it was meant to be set in that code
path. Either way, it's confusing.
Replace it with just writing either 1 or 0 to the LTSSM bit, using the
new FIELD_PREP_WM16 macro from hw_bitfield.h, which grants us the
benefit of better compile-time error checking.
The change of no longer setting the reserved bit doesn't appear to
change the behaviour on RK3568 in RC mode, where it's not marked as
reserved.
PCIE_CLIENT_RC_MODE/PCIE_CLIENT_EP_MODE was another field that wasn't
super clear on what the bit field modification actually is. As far as I
can tell, switching to RC mode doesn't actually write the correct value
to the field if any of its bits have been set previously, as it only
updates one bit of a 4 bit field.
Replace it by actually writing the full values to the field, using the
new FIELD_PREP_WM16 macro, which grants us the benefit of better
compile-time error checking.
This patch was tested on RK3588 (PCIe3 x4 controller), RK3576 (PCIe2 x1
controller) and RK3568 (PCIe x2 controller), all in RC mode.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
The Rockchip PCI driver, like many other Rockchip drivers, has its very
own definition of HIWORD_UPDATE.
Remove it, and replace its usage with either FIELD_PREP_WM16, or two new
header local macros for setting/clearing a bit with the high mask, which
use FIELD_PREP_WM16_CONST internally. In the process, ENCODE_LANES
needed to be adjusted, as FIELD_PREP_WM16* shifts the value for us.
That this is equivalent was verified by first making all FIELD_PREP_WM16
instances FIELD_PREP_WM16_CONST, then doing a static_assert() comparing
it to the old macro (and for those with parameters, static_asserting for
the full range of possible values with the old encode macro).
What we get out of this is compile time error checking to make sure the
value actually fits in the mask, and that the mask fits in the register,
and also generally less icky code that writes shifted values when it
actually just meant to set and clear a handful of bits.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a
WARN_ON sanity check that child devices support MSI-X, because VMD document
says [1]:
Intel VMD only supports MSIx Interrupts from child devices and therefore
the BIOS must enable PCIe Hot Plug and MSIx interrups [sic].
However, the VMD device can't even tell the difference between a child
device using MSI and one using MSI-X. Per 185a383ada ("x86/PCI: Add
driver for Intel Volume Management Device (VMD)"), VMD does not support
INTx interrupts, but does support child devices using either MSI or MSI-X.
Remove the sanity check to avoid the WARN_ON and allow child devices to use
MSI, reported by Ammar.
Fixes: d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1]
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/
Signed-off-by: Nam Cao <namcao@linutronix.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de
f29861aa30 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
changed xilinx_pcie::msi_domain from child devices' interrupt domain to
Xilinx AXI bridge's interrupt domain.
However, xilinx_pcie_intr_handler() wasn't changed and still reads Xilinx
AXI bridge's interrupt domain from xilinx_pcie::msi_domain->parent. This
pointer is NULL now.
Update xilinx_pcie_intr_handler() to read the correct interrupt domain
pointer.
Fixes: f29861aa30 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250811054144.4049448-1-namcao@linutronix.de
vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.
irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.
But d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.
Fix by extracting the chip_data associated with the VMD's interrupt domain.
Fixes: d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
- Teach handle_simple_irq() to resend an in-progress interrupt (Marc
Zyngier)
- Defer probing if the MSI widget driver hasn't probed yet (Marc Zyngier)
- Drop useless conditional compilation, since pci-xgene.c is only compiled
when CONFIG_PCI_XGENE is selected (Marc Zyngier)
- Drop useless XGENE_PCIE_IP_VER_UNKN IP version (Marc Zyngier)
- Simplify and make per-CPU interrupt setup robust (Marc Zyngier)
- Drop superfluous struct xgene_msi fields (Marc Zyngier)
- Use device-managed memory allocations (Marc Zyngier)
- Drop intermediate xgene_msi_group tracking structure (Marc Zyngier)
- Rewrite pci-xgene-msi.c to fix MSI CPU affinity and clean things up (Marc
Zyngier)
- Resend an MSI racing with itself on a different CPU (Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
- Simplify MSI handler setup/teardown by dropping useless CPU hotplug bits
(Marc Zyngier)
- Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD (Marc Zyngier)
* pci/controller/xgene:
cpu/hotplug: Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD
PCI: xgene-msi: Restructure handler setup/teardown
PCI: xgene-msi: Probe as a standard platform driver
PCI: xgene-msi: Resend an MSI racing with itself on a different CPU
PCI: xgene-msi: Sanitise MSI allocation and affinity setting
PCI: xgene-msi: Get rid of intermediate tracking structure
PCI: xgene-msi: Use device-managed memory allocations
PCI: xgene-msi: Drop superfluous fields from xgene_msi structure
PCI: xgene-msi: Make per-CPU interrupt setup robust
PCI: xgene: Drop XGENE_PCIE_IP_VER_UNKN
PCI: xgene: Drop useless conditional compilation
PCI: xgene: Defer probing if the MSI widget driver hasn't probed yet
genirq: Teach handle_simple_irq() to resend an in-progress interrupt
- Fix log message that said "malformed TLP" when it should have said
"Unexpected Completion" (Hans Zhang)
- Fix log message that said "no fatal error" when it should have said "non
fatal error" (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
* pci/controller/rockchip-host:
PCI: rockchip-host: Remove unused header includes
PCI: rockchip-host: Correct non-fatal error log message
PCI: rockchip-host: Fix "Unexpected Completion" log message
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a chance
to train at a higher speed (Geraldo Nascimento)
* pci/controller/rockchip:
PCI: rockchip: Set Target Link Speed to 5.0 GT/s before retraining
PCI: rockchip: Use standard PCIe definitions
PCI: rockchip: Remove redundant PCIe message routing definitions
- Export DWC MSI controller related APIs for use by upcoming DWC-based ECAM
implementation (Mayank Rana)
- Rename gen_pci_init() to pci_host_common_ecam_create() and export for use
by controller drivers (Mayank Rana)
- Add DT binding and driver support for SA8255p, which supports ECAM for
Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port resets in
a Root Port stanza and deprecate describing them in the host bridge; this
makes it possible to support multiple Root Ports in the future (Krishna
Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Add support for parsing the new Root Port binding
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
dt-bindings: PCI: qcom,pcie-sa8255p: Document ECAM compliant PCIe root complex
PCI: host-generic: Rename and export gen_pci_init() for PCIe controller drivers
PCI: dwc: Export DWC MSI controller related APIs
- Use devm_add_action_or_reset() when adding port->clk devm cleanup action
so we don't have to explicitly call clk_put() (Salah Triki)
* pci/controller/mvebu:
PCI: mvebu: Use devm_add_action_or_reset() instead of devm_add_action()
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard
Zhu)
- Factor imx_pcie_add_lut_by_rid() out of imx_pcie_enable_device() for use
by LUT configuration (Frank Li)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger
doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(),
which fixes a hotplug regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Delay link start until configfs 'start' written
PCI: imx6: Remove apps_reset toggling from imx_pcie_{assert/deassert}_core_reset
PCI: imx6: Add LUT configuration for MSI/IOMMU in Endpoint mode
PCI: imx6: Add helper function imx_pcie_add_lut_by_rid()
PCI: imx6: Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred Mallawa)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Delay link training after hot reset in EP mode
- Use PCIe Message routing types from the PCI core rather than defining
private ones (Hans Zhang)
* pci/controller/cadence:
PCI: cadence: Replace private message routing enums with PCI core definitions
- Add optional DT 'num-lanes' property and if present, use it to override
the Maximum Link Width advertised in Link Capabilities (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Replace open coded value with PCIE_T_RRS_READY_MS
MAINTAINERS: Drop Nicolas from maintaining pcie-brcmstb
PCI: brcmstb: Set MLW based on "num-lanes" DT property if present
dt-bindings: PCI: brcm,stb-pcie: Add num-lanes property
- Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS (the
required delay before sending config requests after a reset) (Niklas
Cassel)
- PCIE_T_RRS_READY_MS and PCIE_RESET_CONFIG_WAIT_MS were two names for the
same delay; replace PCIE_T_RRS_READY_MS with PCIE_RESET_CONFIG_WAIT_MS
and remove PCIE_T_RRS_READY_MS (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ to
dw-rockchip, qcom (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s in dwc core (Niklas Cassel)
- Move LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES to pci.h and prefix
with 'PCIE_' for potential sharing across drivers (Niklas Cassel)
* pci/controller/linkup-fix:
PCI: Move link up wait time and max retries macros to pci.h
PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up
PCI: qcom: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: dw-rockchip: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: rockchip-host: Use macro PCIE_RESET_CONFIG_WAIT_MS
PCI: Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS
Add driver support for DesignWare based PCIe controller in SG2044 SoC. The
driver currently supports the Root Complex mode.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
[mani: renamed the driver to 'pcie-sophgo.c' and Kconfig fix]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250504004420.202685-3-inochiama@gmail.com
Convert lock/unlock pairs to lock guard and tidy up the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/836cca37449c70922a2bea1fb13f37940a7a7132.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/1279fe6500a1d8135d8f5feb2f055df008746c88.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/b1353c797ce53714c22823de3bd2ae3d09fcd84f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/5ac6e216bf2eaa438c8854baf2ff3e5cf0b2284f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/b4620dc1808f217a69d0ae50700ffa12ffd657eb.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/ab4005db0a829549be1f348f6c27be50a2118b5e.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/76f6e6ce6021607cd0fdfd79fef7d2eb69d9f361.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message & fixed merge conflict]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/bfbd2e375269071b69e1aa85e629ee4b7c99518f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message & squashed the kdoc cleanup patch]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/53946d74caf1fd134a1820eac82c3cf64d48779f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/fa72703e06c2ee2c7554082c7152913eb0dd294f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/0a88da04bb82bd588828a7889e9d58c515ea5dbb.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/68b2f9387bbe4f08bcd428bfab83ad1219fb8d80.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/af46c15c47a7716f7e0c50d0f7391509c95b49c2.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/04d4a96046490e50139826c16423954e033cdf89.1750858083.git.namcao@linutronix.de
All irq_domain functions now accept fwnode instead of of_node. But many
PCI controllers still extract dev to of_node and then of_node to fwnode.
Instead, clean this up and simply use the dev_fwnode() helper to extract
fwnode directly from dev. Internally, it still does dev => of_node =>
fwnode steps, but it's now hidden from the users.
In the case of altera, this also removes an unused 'node' variable that is
only used when CONFIG_OF is enabled:
drivers/pci/controller/pcie-altera.c: In function 'altera_pcie_init_irq_domain':
drivers/pci/controller/pcie-altera.c:855:29: error: unused variable 'node' [-Werror=unused-variable]
855 | struct device_node *node = dev->of_node;
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # altera
[bhelgaas: squash together, rebase to precede msi-parent]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250521163329.2137973-1-arnd@kernel.org
Link: https://patch.msgid.link/20250611104348.192092-16-jirislaby@kernel.org
Link: https://patch.msgid.link/20250723065907.1841758-1-jirislaby@kernel.org
According to Documentation/PCI/endpoint/pci-endpoint-cfs.rst, the Endpoint
controller (EPC) should only start the link when userspace writes '1' to
the '/sys/kernel/config/pci_ep/controllers/<EPC>/start' attribute, which
ultimately results in calling imx_pcie_start_link() via
pci_epc_start_store().
To align with the documented behavior, do not start the link automatically
when adding the EP controller.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250709033722.2924372-3-hongxing.zhu@nxp.com
apps_reset corresponds to LTSSM_EN in i.MX7, i.MX8MQ, i.MX8MM and i.MX8MP
platforms. Since assertion/de-assertion of apps_reset is done in
imx_pcie_ltssm_enable() and imx_pcie_ltssm_disable(), remove it from
imx_pcie_assert_core_reset() and imx_pcie_deassert_core_reset().
This also fixes a failure in enumerating the PI7C9X2G608GP (hotplug) chip
reliably on i.MX8MM, as reported by Tim.
It should be noted that only i.MX7D, i.MX8MQ, i.MX8MM, and i.MX8MP
platforms have the apps_reset logic, so this change doesn't have any effect
on other platforms.
Fixes: ef61c7d8d0 ("PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()")
Reported-by: Tim Harvey <tharvey@gateworks.com>
Closes: https://lore.kernel.org/all/CAJ+vNU3ohR2YKTwC4xoYrc1z-neDoH2TTZcMHDy+poj9=jSy+w@mail.gmail.com/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mp-venice-gw74xx (i.MX8MP + hotplug capable switch)
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250709033722.2924372-2-hongxing.zhu@nxp.com
Replace devm_add_action() with devm_add_action_or_reset() to avoid
explicitly dropping the 'port->clk' reference in error path.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/aHsgYALHfQbrgq0t@pc
Another utterly pointless aspect of the xgene-msi driver is that
it is built around CPU hotplug. Which is quite amusing since this
is one of the few arm64 platforms that, by construction, cannot
do CPU hotplug in a supported way (no EL3, no PSCI, no luck).
Drop the CPU hotplug nonsense and just setup the IRQs and handlers
in a less overdesigned way, grouping things more logically in the
process.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-13-maz@kernel.org
Now that we have made the dependency between the PCI driver and
the MSI driver explicit, there is no need to use subsys_initcall()
as a probing hook, and we can rely on builtin_platform_driver()
instead.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-12-maz@kernel.org
Since changing the affinity of an MSI really is about changing
the target address and that it isn't possible to mask an individual
MSI, it is completely possible for an interrupt to race with itself,
usually resulting in a lost interrupt.
Paper over the design blunder by informing the core code of this
sad state of affairs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-11-maz@kernel.org
Plugging a device that doesn't use managed affinity on an XGene-1
machine results in messages such as:
genirq: irq_chip PCI-MSIX-0000:01:00.0 did not update eff. affinity mask of irq 39
As it turns out, the driver was never updated to populate the effective
affinity on irq_set_affinity() call, and the core code is prickly about
that.
But upon further investigation, it appears that the driver keeps repainting
the hwirq field of the irq_data structure as a way to track the affinity
of the MSI, something that is very much frowned upon as it breaks the
fundamentals of an IRQ domain (an array indexed by hwirq).
Fixing this results more or less in a rewrite of the driver:
- Define how a hwirq and a CPU affinity map onto the MSI termination
registers
- Allocate a single entry in the bitmap per MSI instead of *8*
- Correctly track CPU affinity
- Fix the documentation so that it actually means something (to me)
- Use standard bitmap iterators
- and plenty of other cleanups
With this, the driver behaves correctly on my vintage Mustang board.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lpieralisi: replaced open coded GENMASK(6, 4) with MSInRx_HWIRQ_MASK]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-10-maz@kernel.org
The xgene-msi driver uses an odd construct in the form of an
intermediate tracking structure, evidently designed to deal with
multiple instances of the MSI widget. However, the existing HW
only has one set, and it is obvious that there won't be new HW
coming down that particular line.
Simplify the driver by using a bit of pointer arithmetic instead,
directly tracking the interrupt and avoiding extra memory allocation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-9-maz@kernel.org
Linus Torvalds