If metric table address is not allocated, accessing metrics_bin will
result in a NULL pointer dereference, so add a check.
Fixes: 5150542b8e ("platform/x86/amd/hsmp: add support for metrics tbl")
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250807100637.952729-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout
to take the semaphore. However __hsmp_send_message(), the content of the
critical section, has a sleep in it. On systems with significantly
delayed scheduling behaviour this may take over 100ms.
Convert this method to down_interruptible(). Leave the error handling
the same as the documentation currently is not specific about what error
is returned.
Previous behaviour: a caller who competes with another caller stuck in
the critical section due to scheduler delays would receive -ETIME.
New behaviour: a caller who competes with another caller stuck in the
critical section due to scheduler delays will complete successfully.
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi: Add driver for Dasharo devices supporting fans and
temperatures monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace using
power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering more
than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to new
variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the enlarged
scope
- power: supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and "cell
imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ABI: testing: sysfs-class-oxp:
- add missing documentation
- add tt_led attribute documentation
Add AMD ISP platform config for OV05C10:
- Add AMD ISP platform config for OV05C10
alienware-wmi-wmax:
- Add a DebugFS interface
- Add HWMON support
- Add support for manual fan control
- Add support for the "custom" thermal profile
- Expose GPIO debug methods
- Fix awcc_hwmon_fans_init() label logic
- Fix uninitialized bitmap in awcc_hwmon_fans_init()
- Improve ID processing
- Improve internal AWCC API
- Improve platform profile probe
- Modify supported_thermal_profiles[]
- Rename thermal related symbols
amd/hsmp: acpi:
- Add sysfs files to display HSMP telemetry
amd/hsmp:
- fix building with CONFIG_HWMON=m
- Report power via hwmon sensors
- Use a single DRIVER_VERSION for all hsmp modules
arm64: huawei-gaokun-ec:
- Remove unneeded semicolon
asus-wmi:
- fix build without CONFIG_SUSPEND
- Refactor Ally suspend/resume
Avoid -Wflex-array-member-not-at-end warning:
- Avoid -Wflex-array-member-not-at-end warning
barco-p50:
- use new GPIO line value setter callbacks
dell-ddv:
- Expose the battery health to userspace
- Expose the battery manufacture date to userspace
- Implement the battery matching algorithm
dell-pc:
- Propagate errors when detecting feature support
- Transition to faux device
- Use non-atomic bitmap operations
docs: ABI:
- Fix "aassociated" to "associated"
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Documentation: ABI:
- Add sysfs platform and debugfs ABI documentation for alienware-wmi
Documentation: admin-guide: laptops:
- Add documentation for alienware-wmi
Documentation: admin-guide: pm:
- Add documentation for agent_types
- Add documentation for die_id
Documentation: wmi: alienware-wmi:
- Add GPIO control documentation
Documentation: wmi:
- Improve and update alienware-wmi documentation
Do not enable by default during compile testing:
- Do not enable by default during compile testing
hid-asus:
- check ROG Ally MCU version and warn
hwmon:
- (oxp-sensors) Add all OneXFly variants
- (oxp-sensors) Distinguish the X1 variants
int0002:
- use new GPIO line value setter callbacks
int3472:
- Add handshake pin support
- Add skl_int3472_register_clock() helper
- Avoid GPIO regulator spikes
- Debug log when remapping pins
- Drop unused gpio field from struct int3472_gpio_regulator
- Export int3472_discrete_parse_crs()
- For mt9m114 sensors map powerdown to powerenable
- Make regulator supply name configurable
- Move common.h to public includes, symbols to INTEL_INT3472
- Prepare for registering more than 1 GPIO regulator
- Remove unused sensor_config struct member
- Rework AVDD second sensor quirk handling
- Stop setting a supply-name for GPIO regulators
- Stop using devm_gpiod_get()
intel/pmc:
- Convert index variables to be unsigned
- Create Intel PMC SSRAM Telemetry driver
- Improve pmc_core_get_lpm_req()
- Move error handling to init function
- Move PMC Core related functions
- Move PMC devid to core.h
- Remove unneeded header file inclusion
- Remove unneeded io operations
- Rename core_ssram to ssram_telemetry
- Use devm for mutex_init
intel: power-domains:
- Add interface to get Linux die ID
intel-uncore-freq:
- Add attributes to show agent types
- Add attributes to show die_id
intel/vsec:
- Change return type of intel_vsec_register
Introduce dasharo-acpi platform driver:
- Introduce dasharo-acpi platform driver
ISST:
- Do Not Restore SST MSRs on CPU Online Operation
- Support SST-PP revision 2
- Support SST-TF revision 2
- Update minor version
mellanox:
- Cosmetic changes to improve code style
- Introduce support of Nvidia smart switch
- Rename field to improve code readability
mlxbf-pmc:
- Support additional PMC blocks
mlx-platform:
- Add support for new Nvidia system
mlxreg-dpu:
- Add initial support for Nvidia DPU
- Fix smatch warnings
nvsw-sn2200:
- Add support for new system flavour
- Fix .items in nvsw_sn2201_busbar_hotplug
oxpec:
- Add a lower bounds check in oxp_psy_ext_set_prop()
- Add charge threshold and behaviour to OneXPlayer
- Add support for the OneXPlayer G1
- Add turbo led support to X1 devices
- Adhere to sysfs-class-hwmon and enable pwm on 2
- Convert defines to using tabs
- Follow reverse xmas convention for tt_toggle
- Make turbo val apply a bitmask
- Move fan speed read to separate function
- Move hwmon/oxp-sensors to platform/x86
- Move pwm_enable read to its own function
- Move pwm value read/write to separate functions
- Rename ec group to tt_toggle
- Rename rval to ret in tt_toggle
portwell-ec:
- Add GPIO and WDT driver for Portwell EC
power: supply:
- add inhibit-charge-awake to charge_behaviour
power: supply: core:
- Add additional health status values
silicom:
- use new GPIO line value setter callbacks
sony-laptop:
- Remove unused sony laptop camera code
thermal/drivers/acerhdf:
- Constify struct thermal_zone_device_ops
thinkpad-acpi:
- Add support for new hotkey for camera shutter switch
tools/power/x86/intel-speed-select:
- Skip uncore frequency update
- Support SST PP revision 2 fields
- v1.23 release
tuxedo:
- Add virtual LampArray for TUXEDO NB04 devices
- Prevent invalid Kconfig state
Use strscpy()/scnprintf() with acpi_device_name/class():
- Use strscpy()/scnprintf() with acpi_device_name/class()
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaDWJ7wAKCRBZrE9hU+XO
MT8JAQDWW6qBoXuqpd6Yx1oOyROc6gJMQAsS9sNc7I60mGooEAEAnTLhOHDGkKb5
av1fz/SmXGl7joeRYkZV9FRzJ/26AAk=
=ytxa
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
Make frequently fetched telemetry available via sysfs. These parameters
do not fit in hwmon sensor model, hence make them available via sysfs.
Create following sysfs files per acpi device node.
* c0_residency_input
* prochot_status
* smu_fw_version
* protocol_version
* ddr_max_bw(GB/s)
* ddr_utilised_bw_input(GB/s)
* ddr_utilised_bw_perc_input(%)
* mclk_input(MHz)
* fclk_input(MHz)
* clk_fmax(MHz)
* clk_fmin(MHz)
* cclk_freq_limit_input(MHz)
* pwr_current_active_freq_limit(MHz)
* pwr_current_active_freq_limit_source
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250506101542.200811-3-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use a single DRIVER_VERSION for the plat, hsmp and acpi modules,
as all these modules are connected to a common functionality.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250506101542.200811-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HSMP interface is just an SMN interface with different offsets.
Define an HSMP wrapper in the SMN code and have the HSMP platform driver
use that rather than a local solution.
Also, remove the "root" member from AMD_NB, since there are no more
users of it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-1-b5cc997e471b@amd.com
Following new HSMP messages are available on family 0x1A, model 0x00-0x1F
platforms with protocol version 7. Add support for them in the driver.
- SetXgmiPstateRange(26h)
- CpuRailIsoFreqPolicy(27h)
- DfcEnable(28h)
- GetRaplUnit(30h)
- GetRaplCoreCounter(31h)
- GetRaplPackageCounter(32h)
Also update HSMP message PwrEfficiencyModeSelection-21h. This message is
updated to include GET option in recent firmware.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241118102752.11703-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When file is opened in WRITE only mode, then GET messages are not allowed
and when file is opened in READ only mode, SET messages are not allowed.
In these scenerios, return error EPERM to userspace instead of EINVAL.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241112120450.2407125-2-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Firmware is updated to send HSMP_ERR_PREREQ_NOT_SATISFIED(0xFD) and
HSMP_ERR_SMU_BUSY(0xFC) error codes. Add them here.
Add error logs to make it easy to understand the failure reason for
different error conditions.
Replace pr_err() with dev_err() to identify the driver printing the
error.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241112120450.2407125-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Instead of making hsmp_pdev global and exporting this symbol from hsmp.c,
make it static and create a wrapper function get_hsmp_pdev() to access
hsmp_pdev from plat.c and acpi.c.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-11-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move out of device_add_group() variants, instead assign static array of
attribute groups to .dev_groups in platform_driver structure.
Then use is_visible to enable only the necessary files on the platform.
.read() and .is_bin_visibile() have slightly different
implemetations on ACPI and non-ACPI system, so move them
to respective files.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-10-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hsmp_send_message() is exported with AMD_HSMP name space.
The other modules who would like to use this symbol,
need to import AMD_HSMP namespace using MODULE_IMPORT_NS()
to get away with warning.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-9-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Separate the probes for HSMP ACPI and platform device drivers.
Provide a Kconfig option to choose between ACPI or the platform device
based driver. The common code which is the core part of the HSMP driver
maintained at hsmp.c is guarded by AMD_HSMP config and is selected by
these two driver configs. This will be built into separate hsmp_common.ko
module and acpi as hsmp_acpi and plat as amd_hsmp respectively.
Also add "|| COMPILE_TEST" clause in Kconfig to get build coverage for
HSMP.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-8-suma.hegde@amd.com
[ij: Fixed doc to use pre-formatted text for the ACPI dump.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
plat_dev is a commonly used variable name, since its made as extern now,
change it to more specific name.
Also change miscdevice hsmp_device to mdev.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-7-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An upcoming change splits HSMP driver into ACPI and platform device
variants. Prepare for the split by moving ACPI related code
to acpi.c from hsmp.c. Common code is kept in hsmp.c.
No logical/functional change.
We still have one driver at this point,
the driver probe will be split in the next patch.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-6-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An upcoming change splits HSMP driver into ACPI and platform device
variants. Prepare for the split by moving platform device part to plat.c.
No functinality/logical changes.
Common code which can be used by ACPI and platform device
remains in hsmp.c.
ACPI code in hsmp.c will be moved to acpi.c in next patch.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-5-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
No logical change, move common structures, macros to hsmp.h,
add missed header files, remove unwanted header inclusions,
and re-order the header file in hsmp.c file.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-4-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to ACPI, Non-ACPI split.
amd_hsmp_rdwr() is used to access HSMP protocol registers.
ACPI and Non-ACPI use different methods to access these registers.
Now that code is split and common functionality is kept in hsmp.c
we need to define a function pointer to handle these functions separately.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-3-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
Having init_acpi() helps in smooth code movement.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-2-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
Create and move hsmp specific code into its own directory,
no logical changes.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-1-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suma Hegde