Core & protocols
----------------
- Improve drop account scalability on NUMA hosts for RAW and UDP sockets
and the backlog, almost doubling the Pps capacity under DoS.
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance by
an additional 50%, even more under extreme conditions.
- Add support for PSP encryption of TCP connections; this mechanism has
some similarities with IPsec and TLS, but offers superior HW offloads
capabilities.
- Ongoing work to support Accurate ECN for TCP. AccECN allows more than
one congestion notification signal per RTT and is a building block for
Low Latency, Low Loss, and Scalable Throughput (L4S).
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath.
- Refactor skb deferral free to better scale on large multi-NUMA hosts,
this improves TCP and UDP RX performances significantly on such HW.
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds.
- Improve handling of setups with a large number of nexthop, making dump
operating scaling linearly and avoiding unneeded synchronize_rcu() on
delete.
- Improve bridge handling of VLAN FDB, storing a single entry per bridge
instead of one entry per port; this makes the dump order of magnitude
faster on large switches.
- Restore IP ID correctly for encapsulated packets at GSO segmentation
time, allowing GRO to merge packets in more scenarios.
- Improve netfilter matching performance on large sets.
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting recent
TCP autotuning changes.
- Allow bridges to redirect to a backup port when the bridge port is
administratively down.
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups.
- Add RCU safety to dst->dev, closing a lot of possible races.
- A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing
code duplication.
- Supports pulling data from an skb frag into the linear area of an XDP
buffer.
Things we sprinkled into general kernel code
--------------------------------------------
- Generate netlink documentation from YAML using an integrated
YAML parser.
Driver API
----------
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection.
- Introduce API for fetching the DMA device for a given queue, allowing
TCP zerocopy RX on more H/W setups.
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath.
- Add a new dedicated ethtool callback enabling drivers to provide the
number of RX rings directly, improving efficiency and clarity in RX
ring queries and RSS configuration.
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause.
- Support for DPLL phase offset exponential moving average, controlling
the average smoothing factor.
Device drivers
--------------
- Add a new Huawei driver for 3rd gen NIC (hinic3).
- Add a new SpacemiT driver for K1 ethernet MAC.
- Add a generic abstraction for shared memory communication devices
(dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages to
improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4): support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k_
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=w2Kz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
-----BEGIN PGP SIGNATURE-----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=Fuey
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of
high-end workstations and laptops from Apple. Linux has been working
on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that
was part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences
being mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded
SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and Axis
ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon
X1 chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into
improving hardware support on the existing machines and cleaning
up contents for validation.
-----BEGIN PGP SIGNATURE-----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=9OtD
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas rcar_gen3
thermal driver, use it for adding R-Car V4H default trim values, fix
a comment typo in that driver and document Gen4 support in its
Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping
and clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjamT4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1BOwH/3ZL/GN+iJ7oFU/jOW4EktnLowCMgIKF
DURhmrZRoqJzZUY8PXysUekXYmniT6Itzv2h4psKMihn/khtapmkRkE23exmR9Gy
h5V4Nxbx4Ero6YfZ3KT4+AY1x2eRO6aDY29EdIAVeWacwOleTPhUvP70d5dZTHdy
QYi21qZarrkG3uiiNrBfgRW2IAcvQ37G1dy6fxJrURhUG3E9u2P9C9REBwQfkxBj
LxaV42oiQNU0S5+r4/0f1UbqR88FTh/X4xmpEFHK+zWewKYdYhXHBdCYlcegH7oO
WwQW8u3ofR/COpFNPdWrpDb9fYia0fbcJ131CVmAy8RySVd4dBAPKDM=
=okDy
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are mostly thermal driver updates, including new thermal drivers
for Renesas RZ/G3S and Renesas RZ/G3E SoCs, a new power slider
platform feature support in the Intel int340x thermal driver, a new
Tegra114- specific SOCTHERM driver and more.
There is also a Step-wise thermal governor update allowing it to start
reducing cooling somewhat earlier if the temperature of the given
thermal zone is falling down and a thermal testing code cleanup.
Specifics:
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav
Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas
rcar_gen3 thermal driver, use it for adding R-Car V4H default trim
values, fix a comment typo in that driver and document Gen4 support
in its Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping and
clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)"
* tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (37 commits)
thermal/drivers/renesas/rzg3e: Fix add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
...
Core changes:
- Allow pins to be identified/marked as GPIO mode with
a special callback. The pin controller core is now
"aware" if a pin is in GPIO mode if the callback is
implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a
line as GPIO and another function such as I2C. This
is enabled in the Qualcomm TLMM driver and also
implemeted from day 1 in the new Broadcom STB driver.
- Rename the pin config option PIN_CONFIG_OUTPUT to
PIN_CONFIG_LEVEL to better describe what the config is
doing, as well as making it more intuitive what shall
be returned when reading this property.
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver.
- Qualcomm Glymur family pin controller driver.
- Broadcom STB family pin controller driver.
- Tegra186 pin controller driver.
- AAEON UP pin controller support. This is some special
pin controller that works as an external advanced line
MUX and amplifier for signals from an Intel SoC.
A cooperative effort with the GPIO maintainer was
needed to reach a solution where we reuse code from
the GPIO aggregator/forwarder driver.
- Renesas RZ/T2H and RZ/N2H pin controller support.
- Axis ARTPEC-8 subdriver for the Samsung pin controller
driver.
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver.
- Properly support bias pull up/down in the pinctrl-single
driver.
- Move over all GPIO portions using generic MMIO GPIO to
the new generic GPIO chip management which has a nice and
separate API.
- Proper DT bindings for some older Broadcom SoCs.
- External GPIO (EGPIO) support in the Qualcomm SM8250.
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers.
-----BEGIN PGP SIGNATURE-----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=DZy/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek: Add support for modem power sequence
- mediatek: Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
-----BEGIN PGP SIGNATURE-----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=/gH0
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
This adds header for the Tegra114 SOCTHERM device tree node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20250828055104.8073-5-clamor95@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
1. STM32 OMM: Fix ineffective/missing setting of the req2ack in the
device based on DT property, if the value is different than 0.
2. Samsung Exynos SROM: Fix IO map resource leak if
of_platform_populate() in probe() failed.
3. Broadcom brcmstb: Document existing, older devices in Devicetree
bindings.
4. Tegra 210 EMC: Document OPP table for interconnects (driver usage
will come later) and define memory client IDs as bindings, because
these are shared between DTS and driver.
-----BEGIN PGP SIGNATURE-----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=w0Tq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VjUi
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.18
1. STM32 OMM: Fix ineffective/missing setting of the req2ack in the
device based on DT property, if the value is different than 0.
2. Samsung Exynos SROM: Fix IO map resource leak if
of_platform_populate() in probe() failed.
3. Broadcom brcmstb: Document existing, older devices in Devicetree
bindings.
4. Tegra 210 EMC: Document OPP table for interconnects (driver usage
will come later) and define memory client IDs as bindings, because
these are shared between DTS and driver.
* tag 'memory-controller-drv-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Use bindings for client ids
dt-bindings: memory: tegra210: Add memory client IDs
dt-bindings: memory: tegra210: emc: Document OPP table and interconnect
dt-bindings: memory: Update brcmstb-memc-ddr binding with older chips
memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe
memory: stm32_omm: Fix req2ack update test
Link: https://lore.kernel.org/r/20250912140030.204650-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
-----BEGIN PGP SIGNATURE-----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=3psf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7iP3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
* tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions
arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal
arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal
arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal
arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks
ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay
ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing
ARM: dts: allwinner: orangepi-zero: Add default audio routing
arm64: dts: allwinner: a523: Add NPU device node
arm64: dts: allwinner: a523: Add MCU PRCM CCU node
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add LEDs
Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add required syscon compatible and #power-domain-cells to the APMU
controller. This is required for the SoC's power domain controller as
the registers are shared.
Device tree bindings for said power domains are also added.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add device tree binding support for RZ/T2H and RZ/N2H SoCs to the
existing RZ/N1 MIIC converter binding. These SoCs share similar MIIC
functionality but have architectural differences that require schema
updates.
Add new compatible strings "renesas,r9a09g077-miic" for RZ/T2H and
"renesas,r9a09g087-miic" for RZ/N2H, with the latter falling back to
the RZ/T2H variant. The new SoCs require reset support with two reset
lines for converter register reset and converter reset, which are not
present on RZ/N1.
Update port configurations to accommodate the different architectures.
RZ/N1 supports 5 ports numbered 1-5 with complex input mappings
covering indices 0-13, while RZ/T2H and RZ/N2H support 4 ports
numbered 0-3 with simplified input mappings covering indices 0-8.
Extend the switch port configuration property to support value 0 for
the new SoCs.
Add a new dt-bindings header file with media interface connection
matrix constants that map GMAC, ESC, and ETHSW ports to numeric
identifiers for use with RZ/T2H and RZ/N2H device trees.
Update DT schema validation to ensure proper port numbering and input
mappings per SoC variant.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910204132.319975-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
-----BEGIN PGP SIGNATURE-----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=qQ7G
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5iR8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux into soc/drivers
This pull request contains Broadcom SoC drivers updates for 6.18:
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
* tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux:
clk: rp1: convert from round_rate() to determine_rate()
drivers: firmware: bcm47xx_sprom: fix spelling
clk: rp1: Implement remaining clock tree
dt-bindings: clock: rp1: Add missing MIPI DSI defines
Link: https://lore.kernel.org/r/20250910171910.666401-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for the Tegra264 generation of I2C is documented as well as some
older Tegra devices, such as the Xiaomi Mi Pad and the ASUS 101 devices.
Contained are also some additions to existing bindings for Tegra114 and
a fix for the power supply feeding VI/CSI.
-----BEGIN PGP SIGNATURE-----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=w8Ms
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=TNku
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.18-rc1
Support for the Tegra264 generation of I2C is documented as well as some
older Tegra devices, such as the Xiaomi Mi Pad and the ASUS 101 devices.
Contained are also some additions to existing bindings for Tegra114 and
a fix for the power supply feeding VI/CSI.
* tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
Link: https://lore.kernel.org/r/20250914063927.89981-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Lenovo Thinkbook 16, Dell Inspiron 7441, Dell Latitude
7455, Samsung Galaxy S20, Billion Capture+, the Monaco EVK and the
Lemans EVK.
The SDM845 Cheza development boards are removed, as they are not longer
in use.
For IPQ5018 crypto, tsens, rng, SPI NAND support is dded, the two MDIO
buses are added and the internal GE PHY.
IPQ5424 gets CPU frequency scaling and a missing UART.
The SA8775P SoC is remaned Lemans, to reduce confusion about the chip
name. The IoT memory map introduced and made the default, GDSP FastRPC
and GPR nodes are added.
Touch keys are enabled on the BQ Aquaris X5 Plus.
On QCM2290 the video accelerator is enabled, so is HS timing modes for
eMMC.
The QCS615 platform is renamed SM6150. CPU frequency scaling and the WiFi
PCIe controller is introduced.
On Monaco (QCS8300) scaling of L3 and DDR bandwidth is introduced. So is
eMMC support and generic packer router (GPR).
On the Monaco Ride board, the eMMC controller is enabled.
On QRB220 RB1, the venus video accelerator is enabled.
For SC7280 the first PCIe controller and PHY is introduced. SoundWire,
LPASS, and USB offload support is added, the codecs and sound card is
then described on the QCM6490 IDP. The MDSS core reset is introduced, to
clear bootloader configuration on SC7280-based devices.
On Fairphone5, USB audio offload is added.
AudioReach support on SC7280 (QCS6490) is introduced and used to
enable sound on the RB3Gen2 board.
The video clock controller is added to SC8180X.
On SC8280XP the GPI DMA controllers are described and enabled.
Display and GPU is enabled for the Fairphone 3 and charging is enabled
on the Google Pixel 3a.
The routing for the second USB connector on the Lenovo Yoga C630 is
described.
On SM6150 ADSP and CDSP FastRPC is introduced, as is the video
encoder/decoder (venus).
On SM6350 RPMh statistics is enabled, the USB audio offload DAI is
introduced and on Fairphone4 the USB audio offload support is enabled.
On SM8450 QRD the PMIC GLINK is described, to add USB Type-C and battery
functionality.
On SM8650 ACD levels are added for the GPU.
Camera and video clock controllers power-domains are updated on SM8450,
SM8550, and SM8650, now that support for multiple power-domains is
accepted.
SM8750 gains bwmon support for dynamic bus scaling, and PCIe nodes.
The DWC3 glue and core nodes are flattened on a number of platforms.
USB Type-C DisplayPort support is extended to 4 lanes (from 2) on a
variety of platforms, now that the QMP PHY driver supports this.
Platform specific RPMh PD constants are replaced with generic constants
wherever possible.
On X Elite the PM8010 is disabled by default, removing boot splats
on a variety of boards without this PMIC, the video clock controller is
added.
For the X Elite and X Plus CRDs, and the Lenovo Thinkpad T14s, HBR3 is
marked as valid for the external DisplayPorts. The fingerprint reader
found on the CRDs are enabled. The PCIe x8 slot on the QCP is enabled.
The two Microsoft Surface Laptop 7 gains WiFi and Bluetooth support.
GPU support is added for the X Plus SoC.
-----BEGIN PGP SIGNATURE-----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=CEIF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cf7V
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.18
Add support for Lenovo Thinkbook 16, Dell Inspiron 7441, Dell Latitude
7455, Samsung Galaxy S20, Billion Capture+, the Monaco EVK and the
Lemans EVK.
The SDM845 Cheza development boards are removed, as they are not longer
in use.
For IPQ5018 crypto, tsens, rng, SPI NAND support is dded, the two MDIO
buses are added and the internal GE PHY.
IPQ5424 gets CPU frequency scaling and a missing UART.
The SA8775P SoC is remaned Lemans, to reduce confusion about the chip
name. The IoT memory map introduced and made the default, GDSP FastRPC
and GPR nodes are added.
Touch keys are enabled on the BQ Aquaris X5 Plus.
On QCM2290 the video accelerator is enabled, so is HS timing modes for
eMMC.
The QCS615 platform is renamed SM6150. CPU frequency scaling and the WiFi
PCIe controller is introduced.
On Monaco (QCS8300) scaling of L3 and DDR bandwidth is introduced. So is
eMMC support and generic packer router (GPR).
On the Monaco Ride board, the eMMC controller is enabled.
On QRB220 RB1, the venus video accelerator is enabled.
For SC7280 the first PCIe controller and PHY is introduced. SoundWire,
LPASS, and USB offload support is added, the codecs and sound card is
then described on the QCM6490 IDP. The MDSS core reset is introduced, to
clear bootloader configuration on SC7280-based devices.
On Fairphone5, USB audio offload is added.
AudioReach support on SC7280 (QCS6490) is introduced and used to
enable sound on the RB3Gen2 board.
The video clock controller is added to SC8180X.
On SC8280XP the GPI DMA controllers are described and enabled.
Display and GPU is enabled for the Fairphone 3 and charging is enabled
on the Google Pixel 3a.
The routing for the second USB connector on the Lenovo Yoga C630 is
described.
On SM6150 ADSP and CDSP FastRPC is introduced, as is the video
encoder/decoder (venus).
On SM6350 RPMh statistics is enabled, the USB audio offload DAI is
introduced and on Fairphone4 the USB audio offload support is enabled.
On SM8450 QRD the PMIC GLINK is described, to add USB Type-C and battery
functionality.
On SM8650 ACD levels are added for the GPU.
Camera and video clock controllers power-domains are updated on SM8450,
SM8550, and SM8650, now that support for multiple power-domains is
accepted.
SM8750 gains bwmon support for dynamic bus scaling, and PCIe nodes.
The DWC3 glue and core nodes are flattened on a number of platforms.
USB Type-C DisplayPort support is extended to 4 lanes (from 2) on a
variety of platforms, now that the QMP PHY driver supports this.
Platform specific RPMh PD constants are replaced with generic constants
wherever possible.
On X Elite the PM8010 is disabled by default, removing boot splats
on a variety of boards without this PMIC, the video clock controller is
added.
For the X Elite and X Plus CRDs, and the Lenovo Thinkpad T14s, HBR3 is
marked as valid for the external DisplayPorts. The fingerprint reader
found on the CRDs are enabled. The PCIe x8 slot on the QCP is enabled.
The two Microsoft Surface Laptop 7 gains WiFi and Bluetooth support.
GPU support is added for the X Plus SoC.
* tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (208 commits)
arm64: dts: qcom: x1e80100: Update GPU OPP table
arm64: dts: qcom: sm8650: Drop redundant status from PMK8550 RTC
arm64: dts: qcom: add initial support for Samsung Galaxy S20
dt-bindings: arm: qcom: document x1q board binding
arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi
arm64: dts: qcom: lemans-evk: Add sound card
arm64: dts: qcom: lemans: Add gpr node
arm64: dts: qcom: x1e78100-t14s-oled: Add eDP panel
arm64: dts: qcom: qcs615-ride: enable venus node to initialize video codec
arm64: dts: qcom: sm6150: add venus node to devicetree
arm64: dts: qcom: x1e80100-romulus: Add WCN7850 Wi-Fi/BT
arm64: dts: qcom: qrb2210-rb1: Enable Venus
arm64: dts: qcom: qcm2290: Add Venus video node
arm64: dts: qcom: monaco-evk: Add sound card
arm64: dts: qcom: qcs8300: Add gpr node
arm64: dts: qcom: qcs8300: Add Monaco EVK board
dt-bindings: arm: qcom: Add Monaco EVK support
arm64: dts: qcom: qcm6490-idp: Add sound card
arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec
arm64: dts: qcom: qcs6490-rb3gen2: Add sound card
...
Link: https://lore.kernel.org/r/20250911233600.3033675-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are four clock controllers in the A523 SoC. The existing binding
already covers two of them that are critical for basic operation. The
remaining ones are the MCU clock controller and CPU PLL clock
controller.
Add a description for the MCU CCU. This unit controls and provides
clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
under low power conditions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The way that resets are handled on these Tegra devices is that there is a
set of peripheral clocks & resets which are paired up. This is because they
are laid out in banks within the CAR (clock and reset) controller. In most
cases we're referring to those resets, so you'll often see a clock ID used
in conjection with the same reset ID for a given IP block.
In addition to those peripheral resets, there are a number of extra resets
that don't have a corresponding clock and which are exposed in registers
outside of the peripheral banks, but still part of the CAR. To support
those "special" registers, the TEGRA*_RESET() is used to denote resets
outside of the regular peripheral resets. Essentially it defines the offset
within the CAR at which special resets start. In the above case, Tegra114
has 5 banks with 32 peripheral resets each. The first special reset,
TEGRA114_RESET(0), therefore gets ID 5 * 32 + 0 = 160.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra30 has CSI pad clock enable bits embedded into PLLD/PLLD2 registers.
Add ids for these clocks. Additionally, move TEGRA30_CLK_CLK_MAX into
clk-tegra30 source.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Each memory client has unique hardware ID, add these IDs.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add compatible strings for the four SCU interrupt controller instances
on the AST2700 SoC (scu-ic0 to 3), following the multi-instance model used
on AST2600.
Also define interrupt indices in the binding header.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250908011812.1033858-4-ryan_chen@aspeedtech.com
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controller found on Tegra256. The number of pins is
slightly different, but the programming model remains the same
Add a new header, include/dt-bindings/gpio/tegra256-gpio.h,
that defines port IDs as well as the TEGRA256_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin. The OS can reconstruct the port ID and pin from
these values to determine the register region for the corresponding
GPIO. However, the OS does not use the macro definitions in this file.
The symbolic names help associate these GPIO specifiers with the names
used in the technical documentation available for the chip.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250823055420.24664-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some of the Qualcomm RPM PD controllers use a common set of indices for
power domains. Add generic indices for Qualcomm RPM power domain
controllers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-3-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After removing RPMh PD indices, it becomes obvious that several entries
don't follow the alphabetic sorting order. Move them in order to keep
the file sorted.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-2-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Historically both RPM and RPMh domain definitions were a part of the
same, qcom-rpmpd.h header. Now as we have a separate header for RPMh
definitions, qcom,rpmhpd.h, move all RPMh power domain definitions to
that header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-1-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
VOSYS contains more resets for a display pipeline, includes ones for the
display controller (called DPU in the manual), the HDMI controller and 2
MIPI DSI controllers.
Allocate IDs for these resets in the dt binding header file.
Now all peripheral related VOSYS reset controls are here, only the bus
matrix / IOPMP ones are missing, which shouldn't be messed with.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813081716.2181843-2-uwu@icenowy.me
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Like other platforms the sc7280 display clock controller provides a
couple of resets, add the defines to allow referring to them.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811-sc7280-mdss-reset-v1-1-83ceff1d48de@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
The RCG and PLL have a separate register space from the GCC.
Also the L3 cache has a separate pll and needs to be scaled along
with the CPU.
Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Added interconnect related changes ]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250811090954.2854440-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the pin and GPIO controller IP for the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs, and add the shared DTSI header
file used by both the bindings and the driver.
The RZ/T2H SoC supports 729 pins, while RZ/N2H supports 576 pins.
Both share the same controller architecture; separate compatible strings
are added for each SoC to distinguish them.
Co-developed-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250808133017.2053637-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the USB clock (USB_CLK) definition for the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs. USB_CLK is used as the
reference clock for USB PHY layer.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250804202643.3967484-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining
a complex macro only used in one place.
- Add pinmux_generic_add_pinfunction() helper and
use this in a few drivers.
New drivers:
- Amlogic S7, S7D and S6 pin control support.
- Eswin EIC7700 pin control support.
- Qualcomm PMIV0104, PM7550 and Milos pin control
support.
Because of unhelpful numbering schemes, the Qualcomm
driver now needs to start to rely on SoC codenames.
- STM32 HDP pin control support.
- Mediatek MT8189 pin control support.
Improvements:
- Switch remaining pin control drivers over to the
new GPIO set callback that provides a return value.
- Support RSVD (reserved) pins in the STM32 driver.
- Move many fixed assignments over to pinctrl_desc
definitions.
- Handle multiple TLMM regions in the Qualcomm driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmiN/SkACgkQQRCzN7AZ
XXPeGw/7BMBf6Uuhs39qHjnLUUgp/H2yzRV7JB3Q99AZh++7mK0z4MchsZfjvXmv
Ql2ADPHzmP9AJwSor/Ssvn4SrPwvC62IFBznB4eqPIL4UgWuIEYSJQNFMbZniFex
kd8+7GAK7K5R5ReIWfUCs3xusO4+MShXZNKkWVaQZT+603kVznADGANBbEkOnXxY
06JKEo++QuChvLMckGOzyW8zAOV68YM2VYaZkuxxCIaIwKoNzGPKDt8NpPvaIijE
S6EhrhRiM595Jt+qAC6lWtwGnFL5DI69Au2IDzaOSyamNLBoA/bmUu9UWB6/HxW2
yOhDW3DbXOB2xhUORlwCBtGsDyxLB9cIyBMjr6JantwPHdz8dzetxaTrwpuNdBQ+
+BgTodEuZf+TXroUQZ5sPRycEKZm1rtO7ctiZ5bG+CtP8qXcc+enMmC8BSCNCWzl
bMOLsvP4ZMOuVU2ryOvhqKnbWxLS2RV5nHChtTF2JoE4ZX0dN/dhvGOe/A4dINhG
3Nb+ETmyEnid9PIPARYNy/7BkT92eEUQJlbI9qeU1AojGmRRQLS3+mJD9VcFSe1F
/sjp5OYL2M/7SUpqBtlapLXN014gSAVV7zzQThndOYf8RJgohQkOWZsZUx7jyieA
4VYQzLWKAfP/IdOnKzM/8mAHw6VT9gJiWtNsc8ZdeYMwhYGSbbM=
=hEj7
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
the diff is all the new Qualcomm clk drivers added for a few SoCs they're
working on. The other two vendors with significant work this cycle are Renesas
and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some
new SoCs while Amlogic is starting a significant refactoring to simplify their
code.
The core framework gained a pair of helpers to get the 'struct device' or
'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit
tests were added for these simple helpers as well. Beyond that core change
there are lots of little fixes throughout the clk drivers for the stuff we see
every day, wrong clk driver data that affects tree topology or supported
frequencies, etc. They're not found until the clks are actually used by some
consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the
Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis tools and
possibly real humans
- A lot of little fixes here and there to things like clk tree topology,
missing frequencies, flagging clks as critical, etc. The full details are in
the commits and sub-tree merge logs
-----BEGIN PGP SIGNATURE-----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=S+dB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
Resolve conflicts with i.MX95 changes 88768d6f8c ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a44 ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.
* clk-fixes:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
clk: sunxi-ng: a523: Mark MBUS clock as critical
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
These five newly supported chips come with both devicetree descriptions
and the changes to wire them up to the build system for easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before the
entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor.
It uses four in-order AX45MP cores, which is the midrange product
from Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one
of the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can
be used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V
and Arm cores that can run Linux. This was already supported for
RISC-V but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window.
-----BEGIN PGP SIGNATURE-----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=pMk/
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs,
and new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly,
the SoC specific firmware on Tegra and Qualcomm get minor enhancements
and chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes.
-----BEGIN PGP SIGNATURE-----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=7T40
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now.
- exynos2200 is a recent high-end mobile phone chip used in a
few Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it.
There are five more chips in a separate branch, as those are new
chip families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly
added machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and
Sophgo sg2042.
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95.
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm.
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmiEp54ACgkQmmx57+YA
GNmE+BAAvGeMkjz05rl3kSeNWCxm3WlQtrVAS3CGxXlmuB3GH4svAYO7ZFqnA1Lq
oLKfvH9TXQgNTRlRV2bKSVCcgsvMdRukqvaNIp+9jOHKkdapgGUHr7XALZCITODp
Ey2YPOKVi3aY2tEqUiuV09oLBFYBB5ldSuPG7SnFHNS0+IWlqqFDdQhrFXfBNf02
Upzca6J96A6TRG7Rq+VD4127QLapNDLm1S2R+3PbEapz/v/XNxQEtigWl+E88N5L
ju1pXu9f93w1EeQla6rN6S8RKI6Ed0kVt0I7mtwJ5KrPs9jzQwZZc5t7z+0HVyaK
o5ldagj7nEVlth2Fc2+E67DnxB6Xe8BkTcNspnS6oWscqvyYo2WCjYOBQcTocU5m
ej4urbS80z2bGbew9zp/ZCBJjmqOdXW/B8z9mokg1u/aktHmAiOWXnFZtws5+rBM
It/GjP4b8MzS3JYq1oNSCUV2KpYF9hzfSg1Td7DEvyhhvSgeJyXNsc4OozZzTCv6
bO3h1PBW6JBWVupRIAz7IrqseAsCabCMfIHduvtYWJieRzv24z1Dfv8p73v3iknN
qpOOyGOvWdPH0u04LAbovYdJfGrR/IN04wOYGcH0uB/bufW5qCKBb9AEAvxvTaJR
Jg1Q7ac/+TVJSFwBQJresw4WdFPHVKVwd2s382Q5hKtx3B5Cn4Y=
=0VBL
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the vast
majority of consumers. Otherwise it's been quite quiet, a few new
devices supported, plus some cleanups and fixes.
- Basic Rust bindings.
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we just
got as close as we could in one step.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Mode setting support for PCA9450.
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1.
The TI driver pulls in the MFD portion of the support for the device and
the pinctrl driver which was in the same tag.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHaHcACgkQJNaLcl1U
h9Dw7Af9HSpY+r/dZzBN1wGky4Yd40tRKP5u5HzHc9T+gG8716wr/KE4SrMIWHax
8SIiKZDC/Bu2kj3D4xaJrb6a8M0AIpRS3IwAbLWqkJ9jPF2082tp+GwbJqI045Ix
ZAWJVUEYQyJ3wwyD0ZG/peCAGvKBgCCn0NGn7KUnAk9QrsiTq8GqDgZPWcKRzXPV
t9twib6J/NAL6I8PKfXnuQNwA9Td79SBySKRY4UgceQtUJgzyBo8UbqMrBuZOY7j
FvxfkYSryDDdEpRMRsczYk+jYjwQVzIa8g4B1C9EF2g5pvWg61PXNX+G2qDkeUbL
XR1gloyJExnlyAXoVY2bg+cSzd2ffQ==
=GAr4
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
-----BEGIN PGP SIGNATURE-----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=tp6K
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3kNF
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.17
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
* tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
Link: https://lore.kernel.org/r/20250720030743.285440-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o90z
-----END PGP SIGNATURE-----
Merge tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.17
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
dt-bindings: interconnect: Add EPSS L3 compatible for QCS8300 SoC
dt-bindings: interconnect: qcom: Remove double colon from description
interconnect: qcom: qcs615: Drop IP0 interconnects
interconnect: qcom: sc8180x: specify num_nodes
interconnect: qcom: sc8280xp: specify num_links for qnm_a1noc_cfg
Enable support for the memory and external memory controllers found on
Tegra264.
-----BEGIN PGP SIGNATURE-----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=4VeH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oTmk
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.17-memory' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
memory: tegra: Updates for v6.17-rc1
Enable support for the memory and external memory controllers found on
Tegra264.
* tag 'tegra-for-6.17-memory' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add Tegra264 MC and EMC support
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds