- Add PINCTRL_PINFUNCTION() macro and use it in several
drivers.
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon"
(always-on) pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin
controller.
- New subdrivers for the Qualcomm SM8550 SoC and LPASS
pin controllers.
- New subdriver for the Qualcomm SA8775P SoC pin controller.
- New subdriver for the Qualcomm IPQ5332 SoC pin controller.
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC
pin control.
- New subdriver for the Mediatek MT7981 SoC pin controller.
Improvements:
- Several cleanups and refactorings to the Intel drivers.
- Add 4KOhm bias support to the Intel driver.
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver.
- Support general purpose clocks in the Qualcomm MSM8226 SoC.
- Several conversions to use the new I2C .probe_new() call.
- Massive clean-up of the Qualcomm Device Tree YAML schemas.
- Add VIN[45] pins, groups and functions to the Renesas
r8a77950 SoC driver.
-----BEGIN PGP SIGNATURE-----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=P75R
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
Replace mentioning of legacy API by the latest one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All new drivers should use fwnode and / or parent to provide the
necessary information to the GPIO library.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that everyone is using [devm_]fwnode_gpiod_get[_index]() APIs,
remove OF-specific [devm_]gpiod_get_from_of_node().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit 3550bba25d.
No users for this one, revert it for good.
The ->add_pin_ranges() can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number
of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller,
Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new helpers, minor
tweaks and fixes, making fwnode usage consistent etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer dereference in
the kernel by opening a device file, forcing a driver unbind and then calling
one of the syscalls on the associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected to other
GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers and use
this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers
-----BEGIN PGP SIGNATURE-----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=zg1O
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a new GPIO multiplexer driver, bunch of driver updates and
refactoring in the core GPIO library.
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
the number of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
controller, Freescale PCIe and Ethernet controller, Himax LCDs and
Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new
helpers, minor tweaks and fixes, making fwnode usage consistent
etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer
dereference in the kernel by opening a device file, forcing a
driver unbind and then calling one of the syscalls on the
associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected
to other GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers
and use this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems
property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers"
* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
gpio: sim: set a limit on the number of GPIOs
gpiolib: protect the GPIO device against being dropped while in use by user-space
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: Provide to_gpio_device() helper
gpiolib: Unify access to the device properties
gpio: Do not include <linux/kernel.h> when not really needed.
gpio: pcf857x: Convert to i2c's .probe_new()
gpio: pca953x: Convert to i2c's .probe_new()
gpio: max732x: Convert to i2c's .probe_new()
dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
gpiolib: ensure that fwnode is properly set
gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
gpiolib: of: Use correct fwnode for DT-probed chips
gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
gpiolib: add support for software nodes
gpiolib: consolidate GPIO lookups
gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
...
Core changes:
- Minor but nice and important documentation clean-ups.
New drivers:
- New subdriver for the Qualcomm SDM670 SoC.
- New subdriver for the Intel Moorefield SoC.
- New trivial support for the NXP Freescale i.MXRT1170 SoC.
Other changes and improvements
- A major clean-up of the Qualcomm pin control device tree bindings
by Krzysztof.
- A major header clean-up by Andy.
- Some immutable irqchip clean-up for the Actions Semiconductor
and Nuvoton drivers.
- GPIO helpers for The Cypress cy8c95x0 driver.
- Bias handling in the Mediatek MT7986 driver.
- Remove the unused pins-are-numbered concept that never flew.
-----BEGIN PGP SIGNATURE-----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=PhTP
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
Now that static device properties understand notion of child nodes and
references, let's teach gpiolib to handle them:
- GPIOs are represented as a references to software nodes representing
gpiochip
- references must have 2 arguments - GPIO number within the chip and
GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc)
- a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above
- name of the software node representing gpiochip must match label of
the gpiochip, as we use it to locate gpiochip structure at runtime
The following illustrates use of software nodes to describe a "System"
button that is currently specified via use of gpio_keys_platform_data
in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in
Documentation/devicetree/bindings/input/gpio-keys.yaml.
static const struct software_node mxt1_gpiochip2_node = {
.name = "alchemy-gpio2",
};
static const struct property_entry mtx1_gpio_button_props[] = {
PROPERTY_ENTRY_U32("linux,code", BTN_0),
PROPERTY_ENTRY_STRING("label", "System button"),
PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW),
{ }
};
Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to:
static const struct software_node tegra_gpiochip_node = {
.name = "tegra-gpio",
};
static struct property_entry wifi_rfkill_prop[] __initdata = {
PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
PROPERTY_ENTRY_STRING("type", "wlan"),
PROPERTY_ENTRY_GPIO("reset-gpios",
&tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH);
PROPERTY_ENTRY_GPIO("shutdown-gpios",
&tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH);
{ },
};
static struct platform_device wifi_rfkill_device = {
.name = "rfkill_gpio",
.id = -1,
};
...
software_node_register(&tegra_gpiochip_node);
device_create_managed_software_node(&wifi_rfkill_device.dev,
wifi_rfkill_prop, NULL);
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that there are no more users of these APIs in the kernel we can
remove them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
While at it, fix some awkward indentations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no external users of fwnode_get_named_gpiod() anymore, so
let's stop exporting it and mark it as static.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- remove gpio-vr41xx driver as the only platform using it got dropped too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in drivers
- reduce using magic numbers and improve code readability in several drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmLruBoACgkQEacuoBRx
13LSqA//QMdrdsYOvSp3m6Dy1swj8a2VpeInDclx/JQ51hIsv03lW6sysrRBBKfy
gslkj0KO+kelEQbcHZdXF6f434Y2QqSU/JRCPQlQ55Uo3vSbUulvVkUtSoegdNKG
airr5KebZtLzjBgc23n38HiTJxa1J238+3UScxYHqL9jQ6AA6sPx7Kpy2zlTwojn
iygJ1CKuyMyHOjU1uhAWYVzCAoguVvOb58emUt5HUsOjjW42d8T+iCHxrJnjC3ST
YWwHnkSd3GO5CLI+5w7MmLk4kaOA8KU7PGRljglwpbsNGknUQ3PFFSlqFUziBzMU
nOG1gZ9bvzOy5xjFcLkT3p/NHZiTnyq+ugDl2RAVQB2UF31KHk2sVGrzIsRpbBgt
kDst5Wn21oymfEO6FM269h5ln+haXouJv2eQvnayBr3rfMxaZCm8veFxjQBDRADf
D3muvi6u/EJPsPg08owcaVrINPVYVGQIzQp5hi+UCBkzXghn+MovNuI/i07Qf1kr
fBELOXTy+MGK22p+rO+rXsp0Cp1zUIbwSz0m8ImbhLqcYLa+Vm5bJHk31/Igvbv3
9FMR75RmfE98EvMhd6ECarZHF9rvCVN7R1U9P1aK8+85m7X5eIVehoQ125uAZf+N
+W49bceSCI/mGqIg8MiQCM5NIW0AXvyjd7gTNN5kr7qsMGTJI3c=
=rGNU
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Here are the updates for this merge window from the GPIO subsystem.
We have more lines removed than added thanks to dropping of a driver
for a platform that's no longer supported. Otherwise the changes are
pretty straightforward: support for some new models, various
improvements to existing drivers, some tweaks to the core library code
and DT bindings updates.
Summary:
- remove gpio-vr41xx driver as the only platform using it got dropped
too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the
document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in
drivers
- reduce using magic numbers and improve code readability in several
drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements"
* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
gpio: xilinx: add missing blank line after declarations
MAINTAINERS: Update Intel 8255 GPIO driver file list
gpio: gpio-mm: Implement and utilize register structures
gpio: 104-idi-48: Implement and utilize register structures
gpio: 104-dio-48e: Implement and utilize register structures
gpio: i8255: Introduce the Intel 8255 interface library module
gpio: 104-idio-16: Implement and utilize register structures
gpio: ws16c48: Implement and utilize register structures
gpio: remove VR41XX related gpio driver
dt-bindings: gpio: add pull-disable flag
gpiolib: acpi: support bias pull disable
gpiolib: of: support bias pull disable
gpiolib: add support for bias pull disable
gpio: 74xx-mmio: use bits.h macros for all masks
gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
gpio: 74xx-mmio: Make use of device properties
gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
gpiolib: cdev: consolidate edge detector configuration flags
...
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----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=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
This change prepares the gpio core to look at firmware flags and set
'FLAG_BIAS_DISABLE' if necessary. It works in similar way to
'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpiolib is unique in the way it uses intermediate fwspecs
when feeding an interrupt specifier to the parent domain, as it
relies on the populate_parent_alloc_arg() callback to perform
a dynamic allocation.
This is pretty inefficient (we free the structure almost immediately),
and the only reason this isn't a stack allocation is that our
ThunderX friend uses MSIs rather than a FW-constructed structure.
Let's solve it by providing a new type composed of the union
of a struct irq_fwspec and a msi_info_t, which satisfies both
requirements. This allows us to use a stack allocation, and we
can move the handful of users to this new scheme.
Also perform some additional cleanup, such as getting rid of the
stub versions of the irq_domain_translate_*cell helpers, which
are never used when CONFIG_IRQ_DOMAIN_HIERARCHY isn't selected.
Tested on a Tegra186.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220707182314.66610-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Commit 48ec13d36d ("gpio: Properly document parent data union")
is supposed to have fixed a warning from "make htmldocs" regarding
kernel-doc comments to union members. However, the same warning
still remains [1].
Fix the issue by following the example found in section "Nested
structs/unions" of Documentation/doc-guide/kernel-doc.rst.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 48ec13d36d ("gpio: Properly document parent data union")
Link: https://lore.kernel.org/r/20220606093302.21febee3@canb.auug.org.au/ [1]
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This contains the new HTE subsystem that has been in the works for a
couple of months now. The infrastructure provided allows for drivers to
register as hardware timestamp providers, while consumers will be able
to request events that they are interested in (such as GPIOs and IRQs)
to be timestamped by the hardware providers.
Note that this currently supports only one provider, but there seems to
be enough interest in this functionality and we expect to see more
drivers added once this is merged.
-----BEGIN PGP SIGNATURE-----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=sOJn
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went through
several rebases before the merge window as bugs were found, so they
remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files.
-----BEGIN PGP SIGNATURE-----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=cnSb
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting both
GPIO and pin control, improving a bunch of drivers in the process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and started
to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into proper
sub-drivers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmKR6skACgkQQRCzN7AZ
XXMpAg/+JXKTooNIuxsfXO2SSQouGJP3xIa0iLdhEKahN8vM7Rp4ND3vuqOI7eqp
pQrGVqY2BiRDhFTz6cku5dBK9tQUlHB9fqr0XHZ65W5pVjz2FCMIE5RemlyNhPMf
OMv4BfJA3Mk71nqmcWjTAc+l7Iw1HAdGrQ4QJpfCHT/eGZCGZXS6q7/iNKyNlnpK
iN7CuJn4YxB8EyAxySEFIi1R/CP1nA1Hmeq1ICxLbFrG/NFZoFjKX1a4xJi4ns7/
3Sn3Vq9t5hJLbU3VZsQymNlCNqzKTtLcSugUlNzkXzvLKebbh27ZVrjWs7pye/s5
Bqbg0e9oDJkAnw8+/tgXKh88hz6ZdUWRVWJElkfp+LyFBuIitGWcaHOEhhaEEHIZ
Utrvba8hjq2r7ASw3gvMWFVHhrQYGBONDkAQGXLtKKFHoNfXf6O5BOmyc0gsYdBo
Sx6X/lAahZkvV17dDop9AlOquf3+jExUHZNftLouazzxqJ1xoDVkbiRz3iKf29n0
+F7hpt0M01jQxUS6whOv9jdR+jAplds35ess99Wput8R5X8ICZRhEtdj4ON10lM/
pI9biaoNXtglCHc2J+nm9EXzD0DePjs/ULCs/0C6FLZ4I5BfZ8dkwe7QNW/cM2vA
V1YTeLVujQASmJo+pfWACoE1nbOg/no1sY1foUKeYnjfhS+OuZg=
=e5GM
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in drivers
- make irqchips immutable due to the new warning popping up when drivers try to
modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x & gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and descriptors to
gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core
-----BEGIN PGP SIGNATURE-----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=tj/B
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
The Tosa device (Sharp SL-6000) has a mishmash driver set-up
for the Toshiba TC6393xb MFD that includes a battery charger
and touchscreen and has some kind of relationship to the SoC
sound driver for the AC97 codec. Other devices define a chip
like this but seem only half-implemented, not really handling
battery charging etc.
This patch switches the Toshiba MFD device to provide GPIO
descriptors to the battery charger and SoC codec. As a result
some descriptors need to be moved out of the Tosa boardfile
and new one added: all SoC GPIO resources to these drivers
now comes from the main boardfile, while the MFD provide
GPIOs for its portions.
As a result we can request one GPIO from our own GPIO chip
and drop two hairy callbacks into the board file.
This platform badly needs to have its drivers split up and
converted to device tree probing to handle this quite complex
relationship in an orderly manner. I just do my best in solving
the GPIO descriptor part of the puzzle. Please don't ask me
to fix everything that is wrong with these driver to todays
standards, I am just trying to fix one aspect. I do try to
use modern devres resource management and handle deferred
probe using new functions where appropriate.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Dirk Opfer <dirk@opfer-online.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYmwsmgAKCRD7cr9lmVa5
zEYPAP4q31AbTJHk6Fs1A79esVSo+DZSkZSzbk/n8Vr3oYG56gD/dVu5EmLNKPHU
6o5+BvdXqjHrymihHasdyD9YqI30zwM=
=MIEU
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
Some GPIO chip can provide hardware timestamp support on its GPIO lines
, in order to support that, additional API needs to be added which
can talk to both GPIO chip and HTE (hardware timestamping engine)
providers if there is any dependencies. This patch introduces optional
hooks to enable and disable hardware timestamping related features
in the GPIO controller chip.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYmwsmgAKCRD7cr9lmVa5
zEYPAP4q31AbTJHk6Fs1A79esVSo+DZSkZSzbk/n8Vr3oYG56gD/dVu5EmLNKPHU
6o5+BvdXqjHrymihHasdyD9YqI30zwM=
=MIEU
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc5' into devel
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
the device tree nodes of GPIO controller need the gpio-ranges property to
handle gpio-hogs. Unfortunately it's impossible to guarantee that every new
kernel is shipped with an updated device tree binary.
In order to provide backward compatibility with those older DTB, we need a
callback within of_gpiochip_add_pin_range() so the relevant platform driver
can handle this case.
Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220409095129.45786-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* irq/gpio-immutable:
: .
: First try at preventing the GPIO subsystem from abusing irq_chip
: data structures. The general idea is to have an irq_chip flag
: to tell the GPIO subsystem that these structures are immutable,
: and to convert drivers one by one.
: .
Documentation: Update the recommended pattern for GPIO irqchips
gpio: Update TODO to mention immutable irq_chip structures
pinctrl: amd: Make the irqchip immutable
pinctrl: msmgpio: Make the irqchip immutable
pinctrl: apple-gpio: Make the irqchip immutable
gpio: pl061: Make the irqchip immutable
gpio: tegra186: Make the irqchip immutable
gpio: Add helpers to ease the transition towards immutable irq_chip
gpio: Expose the gpiochip_irq_re[ql]res helpers
gpio: Don't fiddle with irqchips marked as immutable
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a couple of new helpers to make it slightly simpler to convert
drivers to immutable irq_chip structures:
- GPIOCHIP_IRQ_RESOURCE_HELPERS populates the irq_chip structure
with the resource management callbacks
- gpio_irq_chip_set_chip() populates the gpio_irq_chip.chip
structure, avoiding the proliferation of ugly casts
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-4-maz@kernel.org
The GPIO subsystem has a couple of internal helpers to manage
resources on behalf of the irqchip. Expose them so that GPIO
drivers can use them directly.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-3-maz@kernel.org
* Couple of fixes related to handling unsigned value of the pin from ACPI
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Convert type for pin to be unsigned
- acpi: use correct format characters
-----BEGIN PGP SIGNATURE-----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=i+RD
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.18-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v5.18-2
* Couple of fixes related to handling unsigned value of the pin from ACPI
gpiolib:
- acpi: Convert type for pin to be unsigned
- acpi: use correct format characters
Introduce a helper to get first GPIO controller node which drivers
may want to use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
The gpiochip_node_count() helper iterates over the device child nodes that
have the "gpio-controller" property set. It returns the number of such nodes
under a given device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Introduce for_each_gpiochip_node() loop helper which iterates over
the GPIO controller child nodes of a given device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
A pin that comes from ACPI tables is of unsigned type. This also applies
to the internal APIs which use unsigned int to store the pin. Convert
type for pin to be unsigned in the places where it's not yet true.
While at it, add a stub for acpi_get_and_request_gpiod() for the sake
of consistency in the APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
GPIO chip irq members are exposed before they could be completely
initialized and this leads to race conditions.
One such issue was observed for the gc->irq.domain variable which
was accessed through the I2C interface in gpiochip_to_irq() before
it could be initialized by gpiochip_add_irqchip(). This resulted in
Kernel NULL pointer dereference.
Following are the logs for reference :-
kernel: Call Trace:
kernel: gpiod_to_irq+0x53/0x70
kernel: acpi_dev_gpio_irq_get_by+0x113/0x1f0
kernel: i2c_acpi_get_irq+0xc0/0xd0
kernel: i2c_device_probe+0x28a/0x2a0
kernel: really_probe+0xf2/0x460
kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0
To avoid such scenarios, restrict usage of GPIO chip irq members before
they are completely initialized.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- grammar and formatting fixes in comments for gpio-ts4900
- correct links in gpio-ts5500
- fix a warning in doc generation for the core GPIO documentation
-----BEGIN PGP SIGNATURE-----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=9+Rg
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- grammar and formatting fixes in comments for gpio-ts4900
- correct links in gpio-ts5500
- fix a warning in doc generation for the core GPIO documentation
* tag 'gpio-fixes-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ts5500: Fix Links to Technologic Systems web resources
gpio: Properly document parent data union
gpio: ts4900: Fix comment formatting and grammar
We have several comments that start with '/**' but don't conform to the
kernel doc standard. Add proper detailed descriptions for the affected
definitions and move the docs from the forward declarations to the
struct definitions where applicable.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
intel-gpio for v5.17-1
- Don't set type for IRQ already in use in case of ACPI
- Drop unused call from GPIO ACPI library
- Clean up ML IOH and PCH GPIO drivers to make it closer to each other
- Clarify use of register file version in DesignWare driver
- other minor tweaks
Software nodes allow us to represent hierarchies for device components
that don't have their struct device representation yet - for instance:
banks of GPIOs under a common GPIO expander. The core gpiolib core
however doesn't offer any way of passing this information from the
drivers.
This extends struct gpio_chip with a pointer to fwnode that can be set
by the driver and used to pass device properties for child nodes.
This is similar to how we handle device-tree sub-nodes with
CONFIG_OF_GPIO enabled.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Currently all users of gpiod_add_hogs() call it only once at system
init so there never was any need for a mechanism allowing to remove
them. Now the upcoming gpio-sim will need to tear down chips with hogged
lines so provide a function that allows to remove hogs.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Remove never used devm_acpi_dev_remove_driver_gpios().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The core gpiolib code is able to deal with multiple interrupt parents
for a single gpio irqchip. It however only allows a single piece
of data to be conveyed to all flow handlers (either the gpio_chip
or some other, driver-specific data).
This means that drivers have to go through some interesting dance
to find the correct context, something that isn't great in interrupt
context (see aebdc8abc9 for a prime
example).
Instead, offer an optional way for a pinctrl/gpio driver to provide
an array of pointers which gets used to provide the correct context
to the flow handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211026175815.52703-2-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Rework DesignWare driver to use software nodes instead of platform data
* Drop duplication of forward declaration for ACPI in consumer.h
* Get rid of legacy PCI PM code in ML IOH driver
The following is an automated git shortlog grouped by driver:
dwapb:
- Get rid of legacy platform data
- Read GPIO base from gpio-base property
- Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib:
- Deduplicate forward declaration in the consumer.h header
mfd:
- intel_quark_i2c_gpio: Convert GPIO to use software nodes
ml-ioh:
- Convert to dev_pm_ops
-----BEGIN PGP SIGNATURE-----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=L82Z
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.15-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.15-1
* Rework DesignWare driver to use software nodes instead of platform data
* Drop duplication of forward declaration for ACPI in consumer.h
* Get rid of legacy PCI PM code in ML IOH driver
The following is an automated git shortlog grouped by driver:
dwapb:
- Get rid of legacy platform data
- Read GPIO base from gpio-base property
- Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib:
- Deduplicate forward declaration in the consumer.h header
mfd:
- intel_quark_i2c_gpio: Convert GPIO to use software nodes
ml-ioh:
- Convert to dev_pm_ops
struct acpi_device is repeated in two branches of ifdeffery.
Move it out and hence deduplicate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Several gpiolib functions receive pointer to struct device_node which is
later passed to OF functions. These OF functions accept already pointer
to const, so gpiolib can follow similar approach to indicate they are
not modifying the struct device_node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The default gpiolib-of implementation does not work with the multiple
gpiochip banks per device structure used for example by the gpio-mt7621
and gpio-brcmstb drivers. To fix these kind of situations driver code
is forced to fill the names to avoid the gpiolib code to set names
repeated along the banks. Instead of continue with that antipattern
fix the gpiolib core function to get expected behaviour for every
single situation adding a field 'offset' in the gpiochip structure.
Doing in this way, we can assume this offset will be zero for normal
driver code where only one gpiochip bank per device is used but
can be set explicitly in those drivers that really need more than
one gpiochip.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp, gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean, mostly
dropping unnecessary calls to platform_set_drvdata() and removing error
messages where none are needed (handled by the subsystem already)
- several improvements to the core gpiolib and the sysfs interface code from
Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API + improvements
of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe for
improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=IF0T
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"One new driver, support for new models in existing ones, dt-bindings
conversions for several modules and improvements all over the place.
Summary:
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp,
gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean,
mostly dropping unnecessary calls to platform_set_drvdata() and
removing error messages where none are needed (handled by the
subsystem already)
- several improvements to the core gpiolib and the sysfs interface
code from Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API +
improvements of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe
for improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place"
* tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (57 commits)
docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
dt-bindings: gpio: pcf857x: Convert to json-schema
gpio: mxs: Prefer unsigned int to bare use of unsigned
dt-bindings: gpio: stp: convert to json-schema
dt-bindings: gpio: zynq: convert bindings to YAML
dt-bindings: gpio: gpio-davinci: Convert to json-schema
gpio: pca953x: Add support for the On Semi pca9655
gpio: gpio-xilinx: update on suspend and resume calls
gpio: zynq: Check return value of irq_get_irq_data
gpio: zynq: Check return value of pm_runtime_get_sync
gpio: zynq: use module_platform_driver to simplify the code
gpio: idt3243x: Fix return value check in idt_gpio_probe()
MAINTAINERS: update ti,omap-gpio.yaml reference
dt-bindings: gpio: Add devicetree binding for IDT 79RC32434 GPIO controller
gpio: Add support for IDT 79RC3243x GPIO controller
gpio: regmap: move drvdata to config data
gpio-dwapb: Drop unused headers and sort the rest
gpio: gpio-regmap: Use devm_add_action_or_reset()
gpio: dwapb: Switch to use fwnode_irq_get()
gpio: dwapb: Drop redundant check in dwapb_irq_set_type()
...
Drop gpio_regmap_set_drvdata() and instead add it to the configuration
data passed to gpio_regmap_register().
gpio_regmap_set_drvdata() can't really be used in a race free way. This
is because the gpio_regmap object which is needed by _set_drvdata() is
returned by gpio_regmap_register(). On the other hand, the callbacks
which use the drvdata might already be called right after the
gpiochip_add() call in gpio_regmap_register(). Therefore, we have to
provide the drvdata early before we call gpiochip_add().
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We need to be able to translate GPIO resources in an ACPI device's _CRS
into GPIO descriptor array. Those are represented in _CRS as a pathname
to a GPIO device plus the pin's index number: the acpi_get_gpiod()
function is perfect for that purpose.
As it's currently only used internally within the GPIO layer, provide and
export a wrapper function that additionally holds a reference to the GPIO
device.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces instead of
reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
-----BEGIN PGP SIGNATURE-----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=5vLN
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces
instead of reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
dt-bindings: gpio: add YAML description for rockchip,gpio-bank
gpio: mxs: remove useless function
dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
gpio: it87: remove unused code
gpio: 104-dio-48e: Fix coding style issues
gpio: mpc8xxx: Add ACPI support
gpio: ich: Switch to be dependent on LPC_ICH
gpio: sch: Drop MFD_CORE selection
gpio: sch: depends on LPC_SCH
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
gpio: sch: Add edge event support
gpio: aggregator: Replace custom get_arg() with a generic next_arg()
lib/cmdline: Export next_arg() for being used in modules
gpio: omap: Use device_get_match_data() helper
gpio: Add Realtek Otto GPIO support
dt-bindings: gpio: Binding for Realtek Otto GPIO
docs: kernel-parameters: Add gpio_mockup_named_lines
docs: kernel-parameters: Move gpio-mockup for alphabetic order
lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
...
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the
device tree. The device tree is a functional programming
language and does not imply any order, so the right thing is
for the pin control core to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to
go in and select functions for a pin manually (iteratively, at
the prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver
making use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for
MIPS Broadcom devices to instead use the pin control subsystem.
New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362,
BCM6368, BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs
on PM8008 are supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and
X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic
fixes for the behaviour of the Ingenic pin controller.
Add DMIC pins for JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls.
-----BEGIN PGP SIGNATURE-----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=QrEn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
This is needed for properly registering GPIO regmap as a child of a regmap
pin controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.
Fixes: 6a45b0e258 ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix a few typos and some punctuation. Also, change CONFIG_OF to
CONFIG_OF_GPIO in one comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.
Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Instead of doing it in place, convert GPIO_LOOKUP_IDX() and GPIO_HOG()
to be compund literals that's allow to use them as rvalue in assignments.
Due to above conversion, use compound literal from the header
in the gpio-aggregator.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace unsigned by unsigned int in GPIO library code.
Note, legacy API left untouched.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now that all gpiolib irqchip users have been over to use
the irqchip template, we can finally retire the old code
path and leave just one way in to the irqchip: set up the
template when registering the gpio_chip. For a while
we had two code paths for this which was a bit confusing.
This brings this work to a conclusion, there is now one
way of doing this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20201019134046.65101-1-linus.walleij@linaro.org
Now that devprop_gpiochip_set_names() is only used in a single place
inside drivers/gpio/gpiolib.c, there's no need anymore for it to be
exported or to even live in its own source file. Pull this function into
the core source file for gpiolib.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
devprop_gpiochip_set_names() is overly complicated with taking the
fwnode argument (which requires using dev_fwnode() & of_fwnode_handle()
in ACPI and OF GPIO code respectively). Let's just switch to using the
generic device properties.
This allows us to pull the code setting line names directly into
gpiochip_add_data_with_key() instead of handling it separately for
ACPI and OF.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit 959bc7b22b ("gpio: Automatically add lockdep keys") documents
in its commits message its intention to "create a unique class key for
each driver".
It does so by having gpiochip_add_data add in-place the definition of
two static lockdep classes for LOCKDEP use. That way, every caller of
the macro adds their gpiochip with unique lockdep classes.
There are many indirect callers of gpiochip_add_data, however, via
use of devm_gpiochip_add_data. devm_gpiochip_add_data has external
linkage and all its users will share the same lockdep classes, which
probably is not intended.
Fix this by replicating the gpio_chip_add_data statics-in-macro for
the devm_ version as well.
Fixes: 959bc7b22b ("gpio: Automatically add lockdep keys")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200731123835.8003-1-a.fatoum@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO_REGMAP_ADDR_ZERO() cast to unsigned long but the actual config
parameters are unsigned int. We use unsigned int here because that is
the type which is used by the underlying regmap.
Fixes: ebe363197e ("gpio: add a reusable generic gpio_chip using regmap")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200725232337.27581-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- use kobj_to_dev() in sysfs interface
- kerneldoc and documentation fixes
- relax the interrupt flags in gpio-mpc8xxx
- support new model in gpio-pca953x
- remove a redundant check from gpio-max732x
- support a new platform in gpio-zynq (+ some minor fixes)
- don't depend on GPIOLIB when already inside the "if GPIOLIB" in Kconfig
- support PM ops for suspend in gpio-omap
- minor tweaks in gpiolib
-----BEGIN PGP SIGNATURE-----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=TwKk
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.9-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.9
- use kobj_to_dev() in sysfs interface
- kerneldoc and documentation fixes
- relax the interrupt flags in gpio-mpc8xxx
- support new model in gpio-pca953x
- remove a redundant check from gpio-max732x
- support a new platform in gpio-zynq (+ some minor fixes)
- don't depend on GPIOLIB when already inside the "if GPIOLIB" in Kconfig
- support PM ops for suspend in gpio-omap
- minor tweaks in gpiolib
Introduce for_each_requested_gpio_in_range() macro which helps
to iterate over requested GPIO in a range. There are already
potential users of it, which are going to be converted
by the following patches.
For most of them for_each_requested_gpio() shortcut has been added.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200615150545.87964-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is one parameter with a wrong name at kernel-doc macro:
./include/linux/gpio/driver.h:499: warning: Function parameter or member 'gc' not described in 'gpiochip_add_data'
./include/linux/gpio/driver.h:499: warning: Excess function parameter 'chip' description in 'gpiochip_add_data'
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There are quite a lot simple GPIO controller which are using regmap to
access the hardware. This driver tries to be a base to unify existing
code into one place. This won't cover everything but it should be a good
starting point.
It does not implement its own irq_chip because there is already a
generic one for regmap based devices. Instead, the irq_chip will be
instantiated in the parent driver and its irq domain will be associate
to this driver.
For now it consists of the usual registers, like set (and an optional
clear) data register, an input register and direction registers.
Out-of-the-box, it supports consecutive register mappings and mappings
where the registers have gaps between them with a linear mapping between
GPIO offset and bit position. For weirder mappings the user can register
its own .xlate().
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function connects an IRQ domain to a gpiochip and reuses
gpiochip_to_irq() which is provided by gpiolib.
gpiochip_irqchip_* and regmap_irq partially provide the same
functionality. This function will help to connect just the
minimal functionality of the gpiochip_irqchip which is needed to
work together with regmap-irq.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200528145845.31436-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With 'commit 461c1a7d47 ("gpiolib: override irq_enable/disable")' gpiolib
overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable
callback is implemented then genirq takes unlazy path to disable irq.
Underlying irqchip may not want to implement irq_disable callback to lazy
disable irq when client drivers invokes disable_irq(). By overriding
irq_disable callback, gpiolib ends up always unlazy disabling IRQ.
Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only
if irqchip implemented irq_disable. In cases where irq_disable is not
implemented irq_mask is overridden. Similarly override irq_enable callback
only if irqchip implemented irq_enable otherwise irq_unmask is overridden.
Fixes: 461c1a7d47 ("gpiolib: override irq_enable/disable")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/1590253873-11556-2-git-send-email-mkshah@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently a GPIO lookup table can only refer to a specific GPIO by a
tuple, consisting of a GPIO controller label and a GPIO offset inside
the controller.
However, a GPIO may also carry a line name, defined by DT or ACPI.
If present, the line name is the most use-centric way to refer to a
GPIO. Hence add support for looking up GPIOs by line name.
Note that there is no guarantee that GPIO line names are globally
unique, so this will use the first match found.
Implement this by reusing the existing gpiod_lookup infrastructure.
Rename gpiod_lookup.chip_label to gpiod_lookup.key, to make it clear
that this field can have two meanings, and update the kerneldoc and
GPIO_LOOKUP*() macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20200511145257.22970-4-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When I copied the function prototypes from the GPIO header file into
my own driver, checkpatch yelled at me saying that I shouldn't use use
"unsigned" but instead should say "unsigned int". Let's make the
header file use "unsigned int" so others who copy like I did won't get
yelled at.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.2.Iacb3c8152c3cf9015a91308678155a578b0cc050@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The legacy defines GPIOF_DIR_XXX are only for consumers. Document the
proper ones. Also: don't use "_XXX" since that's harder to find with
"git grep". Just list both of the values.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.1.I396f351e364f3c09df7c7606e79abefb8682c092@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is struct gpio *gc, *chip and *gpiochip, and yes
I am responsible for some of the inconsistencies. I want
this to be just gc everywhere for minimizing cognitive
resistance when reading the code: more compact function
signatures and less clutter.
Purely syntactic changes intended. No semantic effects.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200329140405.52276-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The GPIO Aggregator will need a method to forward a .set_config() call
to its parent gpiochip. This requires obtaining the gpio_chip and
offset for a given gpio_desc. While gpiod_to_chip() is public,
gpio_chip_hwgpio() is not, so there is currently no method to obtain the
needed GPIO offset parameter.
Hence introduce a public gpiod_set_config() helper, which invokes the
.set_config() callback through a gpio_desc pointer, like is done for
most other gpio_chip callbacks.
Rewrite the existing gpiod_set_debounce() helper as a wrapper around
gpiod_set_config(), to avoid duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200324135653.6676-5-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some gpio controllers ignores pin value writing when that pin is
configured as input mode. As a result, bgpio_dir_out should set
pin to output before configuring pin values or gpio pin values
can't be set up properly.
Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first
and bgpio_dir_out_dir_first, and assign direction_output according
to a new flag: BGPIOF_NO_SET_ON_INPUT.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Inclusion of kernel.h increases the mess with the header dependencies.
Avoid kernel.h inclusion where it's possible.
Besides that, clean up a bit other inclusions inside GPIO subsystem headers.
It includes:
- removal pin control bits (forward declaration and header) from linux/gpio.h
- removal of.h from asm-generic/gpio.h
- use of explicit headers in gpio/consumer.h
- add FIXME note with regard to gpio.h inclusion in of_gpio,h
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200205134336.20197-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Dropped the chained IRQ setup callback into GPIOLIB as we
got rid of the last users of that in this changeset.
New drivers:
- New driver for Ingenic X1830.
- New driver for Freescale i.MX8MP.
Driver enhancements:
- Fix all remaining Intel drivers to pass their IRQ chips
along with the GPIO chips.
- Intel Baytrail allocates its irqchip dynamically.
- Intel Lynxpoint is thoroughly rewritten and modernized.
- Aspeed AST2600 pin muxing and configuration is much
improved.
- Qualcomm SC7180 functions are updated and wakeup interrupt
map is provided.
- A whole slew of Renesas SH-PFC cleanups and improvements.
- Fix up the Intel DT bindings to use the generic YAML
DT bindings schema. (A first user of this.)
-----BEGIN PGP SIGNATURE-----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=PnK5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes, nothing too exciting about
this.
Some changes hit arch/sh and arch/arm but are well isolated and
acknowledged by the respective arch maintainers.
Core changes:
- Dropped the chained IRQ setup callback into GPIOLIB as we got rid
of the last users of that in this changeset.
New drivers:
- New driver for Ingenic X1830.
- New driver for Freescale i.MX8MP.
Driver enhancements:
- Fix all remaining Intel drivers to pass their IRQ chips along with
the GPIO chips.
- Intel Baytrail allocates its irqchip dynamically.
- Intel Lynxpoint is thoroughly rewritten and modernized.
- Aspeed AST2600 pin muxing and configuration is much improved.
- Qualcomm SC7180 functions are updated and wakeup interrupt map is
provided.
- A whole slew of Renesas SH-PFC cleanups and improvements.
- Fix up the Intel DT bindings to use the generic YAML DT bindings
schema (a first user of this)"
* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: madera: Remove extra blank line
pinctrl: qcom: Don't lock around irq_set_irq_wake()
pinctrl: mvebu: armada-37xx: use use platform api
gpio: Drop the chained IRQ handler assign function
pinctrl: freescale: Add i.MX8MP pinctrl driver support
dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
pinctrl: tigerlake: Tiger Lake uses _HID enumeration
pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
pinctrl: intel: Pass irqchip when adding gpiochip
pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
pinctrl: sunrisepoint: Add missing Interrupt Status register offset
pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
pinctrl: artpec6: fix __iomem on reg in set
pinctrl: ingenic: Use devm_platform_ioremap_resource()
pinctrl: ingenic: Factorize irq_set_type function
pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
...
Core changes:
- Document the usecases for the kernelspace vs userspace
handling of GPIOs.
- Handle MSI (message signalled interrupts) properly in the
core hierarchical irqdomain code.
- Fix a rare race condition while initializing the descriptor
array.
New drivers:
- Xylon LogiCVC GPIO driver.
- WDC934x GPIO controller driver.
Driver improvements:
- Implemented suspend/resume in the Tegra driver.
- MPC8xx edge detection fixup.
- Properly convert ThunderX to use hierarchical irqdomain
with GPIOLIB_IRQCHIP on top of the revert of the previous
buggy switchover. This time it works (hopefully).
Misc:
- Drop a FMC remnant file <linux/ipmi-fru.h>
- A slew of fixes.
-----BEGIN PGP SIGNATURE-----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=3Glg
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.6 kernel cycle.
This is a pretty calm cycle so far, nothing special going on really.
Some more changes will come in from the irqchip and pin control trees.
I also deleted an orphan include file for FMC that was dangling since
subsystem was removed.
Core changes:
- Document the usecases for the kernelspace vs userspace handling of
GPIOs.
- Handle MSI (message signalled interrupts) properly in the core
hierarchical irqdomain code.
- Fix a rare race condition while initializing the descriptor array.
New drivers:
- Xylon LogiCVC GPIO driver.
- WDC934x GPIO controller driver.
Driver improvements:
- Implemented suspend/resume in the Tegra driver.
- MPC8xx edge detection fixup.
- Properly convert ThunderX to use hierarchical irqdomain with
GPIOLIB_IRQCHIP on top of the revert of the previous buggy
switchover. This time it works (hopefully).
Misc:
- Drop a FMC remnant file <linux/ipmi-fru.h>
- A slew of fixes"
* tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits)
MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer
gpiolib: hold gpio devices lock until ->descs array is initialised
gpio: aspeed-sgpio: fixed typos
gpio: mvebu: clear irq in edge cause register before unmask edge irq
gpiolib: Lower verbosity when allocating hierarchy irq
gpiolib: Remove duplicated function gpio_do_set_config()
gpio: Fix the no return statement warning
gpio: wcd934x: Add support to wcd934x gpio controller
gpiolib: remove set but not used variable 'config'
gpio: vx855: fixed a typo
gpio: mockup: sort headers alphabetically
gpio: mockup: update the license tag
gpio: Remove the unused flags
gpiolib: Set lockdep class for hierarchical irq domains
gpio: thunderx: Switch to GPIOLIB_IRQCHIP
gpiolib: Add the support for the msi parent domain
gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg
gpio: Add use guidance documentation
dt-bindings: gpio: wcd934x: Add bindings for gpio
gpio: altera: change to platform_get_irq_optional to avoid false-positive error
...
gpiochip_set_chained_irqchip() would assign a chained handler
to a GPIO chip. We now populate struct gpio_irq_chip for all
chained GPIO irqchips so drop this function.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200113220800.77817-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In commit 2425876167 ("gpiolib: Add support for the irqdomain which
doesn't use irq_fwspec as arg") we have changed the return type of
gpiochip_populate_parent_fwspec_twocell/fourcell() from void to void *,
but forgot to add a return statement for these two dummy functions.
Add "return NULL" to fix the build warnings.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200116095003.30324-1-haokexin@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some gpio's parent irqdomain may not use the struct irq_fwspec as
argument, such as msi irqdomain. So rename the callback
populate_parent_fwspec() to populate_parent_alloc_arg() and make it
allocate and populate the specific struct which is needed by the
parent irqdomain.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200114082821.14015-3-haokexin@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_get_desc() takes a u16 hwnum, but it turns out most users don't
respect that and usually pass an unsigned int. Since implicit casting to
a smaller type is dangerous - let's change the type of hwnum to unsigned
int in gpiochip_get_desc() and in gpiochip_request_own_desc() where the
size of hwnum is not respected either and who's a user of the former.
This is safe as we then check the hwnum against the number of lines
before proceeding in gpiochip_get_desc().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add possibility to toggle active-low flag of a gpio descriptor. This is
useful for compatibility code, where defaults are inverted vs DT gpio
flags or the active-low flag is taken from elsewhere.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/7ce0338e01ad17fa5a227176813941b41a7c35c1.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When IRQ chip is being added by GPIO library, the ACPI based platform expects
GPIO <-> pin mapping ranges to be initialized in order to correctly initialize
ACPI event mechanism on affected platforms. Unfortunately this step is missed.
Introduce ->add_pin_ranges() callback to fill the above mentioned gap.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
At least for me it is difficult to remember the meaning of GPIO
direction values. Define GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT so that occasional GPIO contributors would
not need to always check the meaning of hard coded values 1 and 0.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.
Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.
This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This introduces fwnode_gpiod_get_index() that iterates through common gpio
suffixes when trying to locate a GPIO within a given firmware node.
We also switch devm_fwnode_gpiod_get_index() to call
fwnode_gpiod_get_index() instead of iterating through GPIO suffixes on
its own.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190913032240.50333-3-dmitry.torokhov@gmail.com
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_fwnode_get_index_gpiod_from_child() is too long, besides the fwnode
in question does not have to be a child of device node. Let's rename it
to devm_fwnode_gpiod_get_index() and keep the old name for compatibility
for now.
Also let's add a devm_fwnode_gpiod_get() wrapper as majority of the
callers need a single GPIO.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20190913032240.50333-2-dmitry.torokhov@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After changing the valid_mask for the struct gpio_chip
to detect the need and presence of a valid mask with the
presence of a .init_valid_mask() callback to fill it in,
we augment the gpio_irq_chip to use the same logic.
Switch all driver using the gpio_irq_chio valid_mask
over to this new method.
This makes sure the valid_mask for the gpio_irq_chip gets
filled in when we add the gpio_chip, which makes it a
little easier to switch over drivers using the old
way of setting up gpio_irq_chip over to the new method
of passing the gpio_irq_chip along with the gpio_chip.
(See drivers/gpio/TODO for details.)
Cc: Joel Stanley <joel@jms.id.au>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20190904140104.32426-1-linus.walleij@linaro.org
The merge of two different patch sets cleaning around in the
main driver include file collided making the function
declarations for gpiochip_[un]lock_as_irq() be defined twice
when gpiolib was unselected. Fix it up.
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- use a helper variable for &pdev->dev in gpio-em
- tweak the ifdefs in GPIO headers
- fix function links in HTML docs
- remove an unneeded error message from ixp4xx
- use the optional clk_get in gpio-mxc instead of checking the return value
- a couple improvements in pca953x
- allow to build gpio-lpc32xx on non-lpc32xx targets
-----BEGIN PGP SIGNATURE-----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=6y9c
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: updates for v5.4
- use a helper variable for &pdev->dev in gpio-em
- tweak the ifdefs in GPIO headers
- fix function links in HTML docs
- remove an unneeded error message from ixp4xx
- use the optional clk_get in gpio-mxc instead of checking the return value
- a couple improvements in pca953x
- allow to build gpio-lpc32xx on non-lpc32xx targets
If CONFIG_GPIOLIB is not, gpiochip_lock/unlock_as_irq will
conflict as this:
In file included from sound/soc/codecs/wm5100.c:18:0:
./include/linux/gpio.h:224:19: error: static declaration of gpiochip_lock_as_irq follows non-static declaration
static inline int gpiochip_lock_as_irq(struct gpio_chip *chip,
^~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/codecs/wm5100.c:17:0:
./include/linux/gpio/driver.h:494:5: note: previous declaration of gpiochip_lock_as_irq was here
int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset);
^~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/codecs/wm5100.c:18:0:
./include/linux/gpio.h:231:20: error: static declaration of gpiochip_unlock_as_irq follows non-static declaration
static inline void gpiochip_unlock_as_irq(struct gpio_chip *chip,
^~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/codecs/wm5100.c:17:0:
./include/linux/gpio/driver.h:495:6: note: previous declaration of gpiochip_unlock_as_irq was here
void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset);
^~~~~~~~~~~~~~~~~~~~~~
Move them to gpio/driver.h and use CONFIG_GPIOLIB guard this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d74be6dfea ("gpio: remove gpiod_lock/unlock_as_irq()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190822031817.32888-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After we switched the two drivers that have .need_valid_mask
set to use the callback for setting up the .valid_mask,
we can just use the presence of the .init_valid_mask()
callback (or the OF reserved ranges, nota bene) to determine
whether to allocate the mask or not and we can drop the
.need_valid_mask field altogether.
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190819093058.10863-1-linus.walleij@linaro.org
It is more helpful for drivers to have the affected fields
directly available when we use the callback to set up the
valid mask. Change this and switch over the only user
(MSM) to use the passed parameters. If we do this we can
also move the mask out of publicly visible struct fields.
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190819084904.30027-1-linus.walleij@linaro.or
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hierarchical IRQ domains can be used to stack different IRQ
controllers on top of each other.
Bring hierarchical IRQ domains into the GPIOLIB core with the
following basic idea:
Drivers that need their interrupts handled hierarchically
specify a callback to translate the child hardware IRQ and
IRQ type for each GPIO offset to a parent hardware IRQ and
parent hardware IRQ type.
Users have to pass the callback, fwnode, and parent irqdomain
before calling gpiochip_irqchip_add().
We use the new method of just filling in the struct
gpio_irq_chip before adding the gpiochip for all hierarchical
irqchips of this type.
The code path for device tree is pretty straight-forward,
while the code path for old boardfiles or anything else will
be more convoluted requireing upfront allocation of the
interrupts when adding the chip.
One specific use-case where this can be useful is if a power
management controller has top-level controls for wakeup
interrupts. In such cases, the power management controller can
be a parent to other interrupt controllers and program
additional registers when an IRQ has its wake capability
enabled or disabled.
The hierarchical irqchip helper code will only be available
when IRQ_DOMAIN_HIERARCHY is selected to GPIO chips using
this should select or depend on that symbol. When using
hierarchical IRQs, the parent interrupt controller must
also be hierarchical all the way up to the top interrupt
controller wireing directly into the CPU, so on systems
that do not have this we can get rid of all the extra
code for supporting hierarchical irqs.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: Bitan Biswas <bbiswas@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Brian Masney <masneyb@onstation.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Co-developed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190808123242.5359-1-linus.walleij@linaro.org
The API, which belongs to GPIO library, is foreign to ACPI headers. Earlier
we moved out I²C out of the latter, and now it's time for
acpi_dev_add_driver_gpios() et al.
For time being the acpi_gpio_get_irq_resource() and acpi_dev_gpio_irq_get()
are left untouched as they need more thought about.
Note, it requires uninline acpi_dev_remove_driver_gpios() to keep purity of
consumer.h.
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Jie Yang <yang.jie@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org (moderated list:INTEL ASoC DRIVERS)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190730104337.21235-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kernel build bot reported a compilation error after the commit
f626d6dfb7 ("gpio: of: Break out OF-only code"):
drivers/gpio/gpiolib-devres.o: In function `devm_gpiod_get_from_of_node':
gpiolib-devres.c:(.text+0x19a): undefined reference to `gpiod_get_from_of_node'
This happens due to move the latter under umbrella of CONFIG_OF_GPIO while
customer.h contains staled data.
Fix it by reshuffling contents of consumer.h to satisfy build dependencies.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: f626d6dfb7 ("gpio: of: Break out OF-only code"):
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190730104337.21235-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The whole struct/function declarations in this header are surrounded
by #ifdef.
As far as I understood, the motivation of this is probably to break
the build earlier if a driver misses to select or depend on correct
CONFIG options in Kconfig.
Since commit 94bed2a9c4 ("Add -Werror-implicit-function-declaration")
no one cannot call functions that have not been declared.
So, I see some benefit in doing this in the cost of uglier headers.
In reality, it would not be so easy to catch missed 'select' or
'depends on' because GPIOLIB, GPIOLIB_IRQCHIP etc. are already selected
by someone else eventually. So, this kind of error, if any, will be
caught by randconfig bots.
In summary, I am not a big fan of cluttered #ifdef nesting, and this
does not matter for normal developers. The code readability wins.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
If gpiolib is disabled, we use the inline stubs from gpio/consumer.h
instead of regular definitions of GPIO API. The stubs for 'optional'
variants of gpiod_get routines return NULL in this case as if the
relevant GPIO wasn't found. This is correct so far.
Calling other (non-gpio_get) stubs from this header triggers a warning
because the GPIO descriptor couldn't have been requested. The warning
however is unconditional (WARN_ON(1)) and is emitted even if the passed
descriptor pointer is NULL.
We don't want to force the users of 'optional' gpio_get to check the
returned pointer before calling e.g. gpiod_set_value() so let's only
WARN on non-NULL descriptors.
Cc: stable@vger.kernel.org
Reported-by: Claus H. Stovgaard <cst@phaseone.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
cycle:
Core changes:
- Device links can optionally be added between a pin control
producer and its consumers. This will affect how the system
power management is handled: a pin controller will not suspend
before all of its consumers have been suspended. This was
necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense
to make this default in the long run. Right now it is
opt-in per driver.
- Drive strength can be specified in microamps. With decreases
in silicon technology, milliamps isn't granular enough, let's
make it possible to select drive strengths in microamps. Right
now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a
product line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in
addition to muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken
aside and not usable for users. This is used in ACPI systems
to take out some GPIO lines used by the BIOS so that
noone else (neither kernel nor userspace) will play with them
by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board
management controllers for servers) in preparation for the
new Aspeed AST2600 SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Wdw1
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:
Core changes:
- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.
This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.
Right now it is opt-in per driver.
- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.
Right now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in addition to
muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes"
* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...
A new field init_valid_mask was added to struct gpio_chip, but it was
not documented.
Fixes: f8ec92a9f6 ("gpiolib: Add init_valid_mask exported function")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142650.25122-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Improve readability a bit by commenting #if/#else/#endif statements
with the checked preprocessor symbols.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We already have an array named "parents" so instead
of letting one point to the other, simply allocate a
dynamic array to hold the parents, just one if desired
and drop the number of members in gpio_irq_chip by
1. Rename gpiochip to gc in the process.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes the warnings:
* include/linux/gpio.h:254:11: warning: 'struct pinctrl_dev' declared
inside parameter list will not be visible outside of this definition
or declaration
* include/linux/gpio/driver.h:602:11: warning: 'struct pinctrl_dev'
declared inside parameter list will not be visible outside of this
definition or declaration
Fixes: 78b99577b3 ("pinctrl: remove unused pin_is_valid()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When a gpio_chip wants to request a descriptor from itself
using gpiochip_request_own_desc() it needs to be able to specify
fully how to use the descriptor, notably line inversion
semantics. The workaround in the gpiolib.c can be removed
and cases (such as SPI CS) where we need at times to request
a GPIO with line inversion semantics directly on a chip for
workarounds, can be fully supported with this call.
Fix up some users of the API that weren't really using the
last flag to set up the line as input or output properly
but instead just calling direction setting explicitly
after requesting the line.
Cc: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to
be handled consistently. Unsurprisingly, we enforce the lines to
be either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone
does, so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed.
Such nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs
and outputs at the same time and after improving the MMIO library
we handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM
work as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update.
-----BEGIN PGP SIGNATURE-----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=rhto
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
Since GPIO library operates with enumerator when it's subject to handle
the GPIO lookup flags, it will be better to clearly see what default means.
Thus, introduce GPIO_LOOKUP_FLAGS_DEFAULT entry to describe
the default assumptions.
While here, replace 0 by newly introduced constant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The library uses enum gpio_lookup_flags to define the possible
characteristics of GPIO pin. Since enumerator listed only individual
bits the common use of it is in a form of a bitmask of
gpio_lookup_flags GPIO_* values. The more correct type for this is
unsigned long.
Due to above convert all users to use unsigned long instead of
enum gpio_lookup_flags except enumerator definition.
While here, make field and parameter descriptions consistent as well.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Indent entry values in the enum gpio_lookup_flags for better readability.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The direction inversion semantics are now handled by simply
using the registers for in/out available, no need to keep
track of inversion semantics exmplicitly anymore.
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It turns out that one specific hardware has two direction
registers: one to set a GPIO line as input and another one
to set a GPIO line as output. So in theory a line can be
configured as input and output at the same time.
Make the MMIO GPIO helper deal with this: store both
registers in the state container, use both in the generic
code if present. Synchronize the input register to the
output register when we register a GPIO chip, with the
output settings taking precedence.
Keep the helper variable to detect inverted direction
semantics (only direction in register) but augment the
code to be more straight-forward for the generic case
when setting the registers.
Fix some flunky with unreadable direction registers at
the same time as we're touching this code.
Cc: David Woods <dwoods@mellanox.com>
Cc: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This function is needed in mcp23s08. That driver is a special snowflake
because it supports several hardware chips as a single "GPIO chip" under
Linux.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Phil Reid <preid@electromag.com.au>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit adds support for configuring the pull-up and pull-down
resistors available in some GPIO controllers. While configuring
pull-up/pull-down is already possible through the pinctrl subsystem,
some GPIO controllers, especially simple ones such as GPIO expanders
on I2C, don't have any pinmuxing capability and therefore do not use
the pinctrl subsystem.
This commit implements the GPIO_PULL_UP and GPIO_PULL_DOWN flags,
which can be used from the Device Tree, to enable a pull-up or
pull-down resistor on a given GPIO.
The flag is simply propagated all the way to the core GPIO subsystem,
where it is used to call the gpio_chip ->set_config callback with the
appropriate existing PIN_CONFIG_BIAS_* values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds the two new functions gpiochip_irq_domain_activate and
gpiochip_irq_domain_deactivate that can be used as the activate and
deactivate functions in the struct irq_domain_ops. This is for
situations where only gpiochip_{lock,unlock}_as_irq needs to be called.
SPMI and SSBI GPIO are two users that will initially use these
functions.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Some core changes are already in outside of this pull
request as they came through the regulator tree, most
notably devm_gpiod_unhinge() that removes devres refcount
management from a GPIO descriptor. This is needed in
subsystems such as regulators where the regulator core
need to take over the reference counting and lifecycle
management for a GPIO descriptor.
- We dropped devm_gpiochip_remove() and devm_gpio_chip_match()
as nothing needs it. We can bring it back if need be.
- Add a global TODO so people see where we are going. This
helps setting the direction now that we are two GPIO
maintainers.
- Handle the MMC CD/WP properties in the device tree core.
(The bulk of patches activating this code is already
merged through the MMC/SD tree.)
- Augment gpiochip_request_own_desc() to pass a flag so
we as gpiochips can request lines as active low or open
drain etc even from ourselves.
New drivers:
- New driver for Cadence GPIO blocks.
- New driver for Atmel SAMA5D2 PIOBU GPIO lines.
Driver improvements:
- A major refactoring of the PCA953x driver - this driver has
been around for ages, and is now modernized to reduce code
duplication that has stacked up and is using regmap to read
write and cache registers.
- Intel drivers are now maintained in a separate tree and
start with a round of cleanups and unifications.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcJJcmAAoJEEEQszewGV1zdCoQAMSLPh+4QdYLFS3ZmnsPvZkg
Zkz94RVT+uLLmHpR8XBl0wl4mmYCiwB50IwsXwlvJGceSXjCn6hLg9BZBP5hFMCb
yFk3fgXQSh7TOnpjgbCWSssCjpejQ0cOb/2nWHz5s/fbYKYlh3VXckW9hhW+R+b3
6+Mno1SzmBkpVVQ21ISlZeLoNDynkCW6DfjiKMuHAyxzxa0oZ9Qid+tnVDnQM4rD
rCnvYLuvxlXw97W+LI7AU9KoCITdO+2M/0dtGVEEYKfHseRReSy2Oo3nlqCglygX
cNkBe9RYU1CJdas1P/c18wjDAqWp/pbugzHDkYF5Y3tBtB2rQSftjtnQngiVMXMt
De7ejPvL7/OLECvI2WUD6y9NAduw/HE4FO8BBdn0gP/a9svJpVZ993yPd3F9n7EZ
ZIBpycDZVtkcE7dwQgek17bFILRY5nBBMB9oCLL2wk48qdmjpcAbxVfGSsYOe6wO
+cZRZuj/eR3i9gHRugfFx7Evoc7l4erihTpES/YAy3De1s3uV8KjT4zE7Jh+M9LW
GM797BcXJJeb5toC7HZ/G2UAVMyWEhY0n7PGG616CS8IrzmzIZpJOL9kUVOWPb0F
9CPt6qhVbUl9rxp1H/Z3TxvYqIw6icn/z5YewZxLU1zaBlpE3jc7PhZb5hOGnFUf
/DWwe4n99JsjHTrGx1ra
=05LW
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.21 kernel series.
Core changes:
- Some core changes are already in outside of this pull request as
they came through the regulator tree, most notably
devm_gpiod_unhinge() that removes devres refcount management from a
GPIO descriptor. This is needed in subsystems such as regulators
where the regulator core need to take over the reference counting
and lifecycle management for a GPIO descriptor.
- We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as
nothing needs it. We can bring it back if need be.
- Add a global TODO so people see where we are going. This helps
setting the direction now that we are two GPIO maintainers.
- Handle the MMC CD/WP properties in the device tree core. (The bulk
of patches activating this code is already merged through the
MMC/SD tree.)
- Augment gpiochip_request_own_desc() to pass a flag so we as
gpiochips can request lines as active low or open drain etc even
from ourselves.
New drivers:
- New driver for Cadence GPIO blocks.
- New driver for Atmel SAMA5D2 PIOBU GPIO lines.
Driver improvements:
- A major refactoring of the PCA953x driver - this driver has been
around for ages, and is now modernized to reduce code duplication
that has stacked up and is using regmap to read write and cache
registers.
- Intel drivers are now maintained in a separate tree and start with
a round of cleanups and unifications"
* tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits)
gpio: sama5d2-piobu: Depend on OF_GPIO
gpio: Add Cadence GPIO driver
dt-bindings: gpio: Add bindings for Cadence GPIO
gpiolib-acpi: remove unused variable 'err', cleans up build warning
gpio: mxs: read pin level directly instead of using .get
gpio: aspeed: remove duplicated statement
gpio: add driver for SAMA5D2 PIOBU pins
dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller
gpio/mmc/of: Respect polarity in the device tree
dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support
memory: omap-gpmc: Get the header of the enum
ARM: omap1: Fix new user of gpiochip_request_own_desc()
gpio: pca953x: Add regmap dependency for PCA953x driver
gpio: raspberrypi-exp: decrease refcount on firmware dt node
gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
gpio: pca953x: Restore registers after suspend/resume cycle
gpio: pca953x: Zap single use of pca953x_read_single()
gpio: pca953x: Zap ad-hoc reg_output cache
gpio: pca953x: Zap ad-hoc reg_direction cache
gpio: pca953x: Perform basic regmap conversion
...
If CONFIG_GPOILIB is not set, the stub of gpio_to_desc() should return
the same type of error as regular version: NULL. All the callers
compare the return value of gpio_to_desc() against NULL, so returned
ERR_PTR would be treated as non-error case leading to dereferencing of
error value.
Fixes: 79a9becda8 ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Before things go out of hand, make it possible to pass
flags when requesting "own" descriptors from a gpio_chip.
This is necessary if the chip wants to request a GPIO with
active low semantics, for example.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Roger Quadros <rogerq@ti.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a function named devm_gpiod_unhinge() that removes
the resource management from a GPIO descriptor.
I am not sure if this is the best anglosaxon name for the
function, no other managed resources have an equivalent
currently, but I chose "unhinge" as the closest intuitive
thing I could imagine that fits Rusty Russell's API design
criterions "the obvious use is the correct one" and
"the name tells you how to use it".
The idea came out of a remark from Mark Brown that it should
be possible to handle over management of a resource from
devres to the regulator core, and indeed we can do that.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This function already exist inside gpiolib, we were just
reluctant to make it available to the kernel at large as
the devm_* seemed to be enough for anyone.
However we found out that regulators need to do their own
lifecycle/refcounting on GPIO descriptors and explicitly
call gpiod_put() when done with a descriptor, so export
this function so we can hand the refcounting over to the
regulator core for these descriptors after retrieveal.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the broken to_gpio_irq_chip() container_of() helper, which would
break the build for anyone who tries to use it.
Specifically, struct gpio_irq_chip only holds a pointer to a struct
irq_chip so using container_of() on an irq-chip pointer makes no sense.
Fixes: da80ff81a8 ("gpio: Move irqchip into struct gpio_irq_chip")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiod_request_commit() copies the pointer to the label passed as
an argument only to be used later. But there's a chance the caller
could immediately free the passed string(e.g., local variable).
This could trigger a use after free when we use gpio label(e.g.,
gpiochip_unlock_as_irq(), gpiochip_is_requested()).
To be on the safe side: duplicate the string with kstrdup_const()
so that if an unaware user passes an address to a stack-allocated
buffer, we won't get the arbitrary label.
Also fix gpiod_set_consumer_name().
Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is hardly any reason to call devm_gpiochip_remove() because the
driver core handles calling gpiochip_remove() automatically.
To make it harder to introduce new (and probably unneeded) callers, drop
the function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- A patch series from Hans Verkuil to make it possible to
enable/disable IRQs on a GPIO line at runtime and drive GPIO
lines as output without having to put/get them from scratch.
The irqchip callbacks have been improved so that they can
use only the fastpatch callbacks to enable/disable irqs
like any normal irqchip, especially the gpiod_lock_as_irq()
has been improved to be callable in fastpath context.
A bunch of rework had to be done to achieve this but it is
a big win since I never liked to restrict this to slowpath.
The only call requireing slowpath was try_module_get() and
this is kept at the .request_resources() slowpath callback.
In the GPIO CEC driver this is a big win sine a single
line is used for both outgoing and incoming traffic, and
this needs to use IRQs for incoming traffic while actively
driving the line for outgoing traffic.
- Janusz Krzysztofik improved the GPIO array API to pass a
"cookie" (struct gpio_array) and a bitmap for setting or
getting multiple GPIO lines at once. This improvement
orginated in a specific need to speed up an OMAP1 driver and
has led to a much better API and real performance gains
when the state of the array can be used to bypass a lot
of checks and code when we want things to go really fast.
The previous code would minimize the number of calls
down to the driver callbacks assuming the CPU speed was
orders of magnitude faster than the I/O latency, but this
assumption was wrong on several platforms: what we needed
to do was to profile and improve the speed on the hot
path of the array functions and this change is now
completed.
- Clean out the painful and hard to grasp BNF experiments
from the device tree bindings. Future approaches are looking
into using JSON schema for this purpose. (Rob Herring
is floating a patch series.)
New drivers:
- The RCAR driver now supports r8a774a1 (RZ/G2M).
- Synopsys GPIO via CREGs driver.
Major improvements:
- Modernization of the EP93xx driver to use irqdomain and
other contemporary concepts.
- The ingenic driver has been merged into the Ingenic pin
control driver and removed from the GPIO subsystem.
- Debounce support in the ftgpio010 driver.
-----BEGIN PGP SIGNATURE-----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=YosT
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.20 series:
Core changes:
- A patch series from Hans Verkuil to make it possible to
enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
as output without having to put/get them from scratch.
The irqchip callbacks have been improved so that they can use only
the fastpatch callbacks to enable/disable irqs like any normal
irqchip, especially the gpiod_lock_as_irq() has been improved to be
callable in fastpath context.
A bunch of rework had to be done to achieve this but it is a big
win since I never liked to restrict this to slowpath. The only call
requireing slowpath was try_module_get() and this is kept at the
.request_resources() slowpath callback. In the GPIO CEC driver this
is a big win sine a single line is used for both outgoing and
incoming traffic, and this needs to use IRQs for incoming traffic
while actively driving the line for outgoing traffic.
- Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
(struct gpio_array) and a bitmap for setting or getting multiple
GPIO lines at once.
This improvement orginated in a specific need to speed up an OMAP1
driver and has led to a much better API and real performance gains
when the state of the array can be used to bypass a lot of checks
and code when we want things to go really fast.
The previous code would minimize the number of calls down to the
driver callbacks assuming the CPU speed was orders of magnitude
faster than the I/O latency, but this assumption was wrong on
several platforms: what we needed to do was to profile and improve
the speed on the hot path of the array functions and this change is
now completed.
- Clean out the painful and hard to grasp BNF experiments from the
device tree bindings. Future approaches are looking into using JSON
schema for this purpose. (Rob Herring is floating a patch series.)
New drivers:
- The RCAR driver now supports r8a774a1 (RZ/G2M).
- Synopsys GPIO via CREGs driver.
Major improvements:
- Modernization of the EP93xx driver to use irqdomain and other
contemporary concepts.
- The ingenic driver has been merged into the Ingenic pin control
driver and removed from the GPIO subsystem.
- Debounce support in the ftgpio010 driver"
* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
gpio: Drop parent irq assignment during cascade setup
mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
gpio: fix SNPS_CREG kconfig dependency warning
gpiolib: Initialize gdev field before is used
gpio: fix kernel-doc after devres.c file rename
gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
gpio: syscon: Fix possible NULL ptr usage
gpiolib: Show correct direction from the beginning
pinctrl: msm: Use init_valid_mask exported function
gpiolib: Add init_valid_mask exported function
GPIO: add single-register GPIO via CREG driver
dt-bindings: Document the Synopsys GPIO via CREG bindings
gpio: mockup: use device properties instead of platform_data
gpio: Slightly more helpful debugfs
gpio: omap: Remove set but not used variable 'dev'
gpio: omap: drop omap_gpio_list
Accept partial 'gpio-line-names' property.
gpio: omap: get rid of the conditional PM runtime calls
...
This allows nonexclusive (simultaneous) access to a single
GPIO line for the fixed regulator enable line. This happens
when several regulators use the same GPIO for enabling and
disabling a regulator, and all need a handle on their GPIO
descriptor.
This solution with a special flag is not entirely elegant
and should ideally be replaced by something more careful as
this makes it possible for several consumers to
enable/disable the same GPIO line to the left and right
without any consistency. The current use inside the regulator
core should however be fine as it takes special care to
handle this.
For the state of the GPIO backend, this is still the
lesser evil compared to going back to global GPIO
numbers.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Fixes: efdfeb079c ("regulator: fixed: Convert to use GPIO descriptor only")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument
and then the address of that argument is assigned to the gpio chips
gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever
work, because we've just assigned some stack address to a pointer that
we plan to dereference later in gpiochip_irq_map(). I ran into this
issue with the KASAN report below when gpiochip_irq_map() tried to setup
the parent irq with a total junk pointer for the 'parents' array.
BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248
Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 #34
Call trace:
[<ffffff9008093638>] dump_backtrace+0x0/0x718
[<ffffff9008093da4>] show_stack+0x20/0x2c
[<ffffff90096b9224>] __dump_stack+0x20/0x28
[<ffffff90096b91c8>] dump_stack+0x80/0xbc
[<ffffff900845a350>] print_address_description+0x70/0x238
[<ffffff900845a8e4>] kasan_report+0x1cc/0x260
[<ffffff900845aa14>] __asan_report_load4_noabort+0x2c/0x38
[<ffffff900897e098>] gpiochip_irq_map+0x228/0x248
[<ffffff900820cc08>] irq_domain_associate+0x114/0x2ec
[<ffffff900820d13c>] irq_create_mapping+0x120/0x234
[<ffffff900820da78>] irq_create_fwspec_mapping+0x4c8/0x88c
[<ffffff900820e2d8>] irq_create_of_mapping+0x180/0x210
[<ffffff900917114c>] of_irq_get+0x138/0x198
[<ffffff9008dc70ac>] spi_drv_probe+0x94/0x178
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca6538>] __device_attach_driver+0x148/0x20c
[<ffffff9008ca14cc>] bus_for_each_drv+0x120/0x188
[<ffffff9008ca570c>] __device_attach+0x19c/0x2dc
[<ffffff9008ca586c>] device_initial_probe+0x20/0x2c
[<ffffff9008ca18bc>] bus_probe_device+0x80/0x154
[<ffffff9008c9b9b4>] device_add+0x9b8/0xbdc
[<ffffff9008dc7640>] spi_add_device+0x1b8/0x380
[<ffffff9008dcbaf0>] spi_register_controller+0x111c/0x1378
[<ffffff9008dd6b10>] spi_geni_probe+0x4dc/0x6f8
[<ffffff9008cab058>] platform_drv_probe+0xdc/0x130
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca59cc>] __driver_attach+0x100/0x194
[<ffffff9008ca0ea8>] bus_for_each_dev+0x104/0x16c
[<ffffff9008ca58c0>] driver_attach+0x48/0x54
[<ffffff9008ca1edc>] bus_add_driver+0x274/0x498
[<ffffff9008ca8448>] driver_register+0x1ac/0x230
[<ffffff9008caaf6c>] __platform_driver_register+0xcc/0xdc
[<ffffff9009c4b33c>] spi_geni_driver_init+0x1c/0x24
[<ffffff9008084cb8>] do_one_initcall+0x240/0x3dc
[<ffffff9009c017d0>] kernel_init_freeable+0x378/0x468
[<ffffff90096e8240>] kernel_init+0x14/0x110
[<ffffff9008086fcc>] ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2
>ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3
^
ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Let's leave around one unsigned int in the gpio_irq_chip struct for the
single parent irq case and repoint the 'parents' array at it. This way
code is left mostly intact to setup parents and we waste an extra few
bytes per structure of which there should be only a handful in a system.
Cc: Evan Green <evgreen@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: e0d8972898 ("gpio: Implement tighter IRQ chip integration")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a function that allows initializing the valid_mask from
gpiochip_add_data.
This prevents race conditions during gpiochip initialization.
If the function is not exported, then the old behaviour is respected,
this is, set all gpios as valid.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Internal helper function gpiod_set_array_value_complex() was changed to
return an error value, but not all gpiolib callers were updated to
propagate the new error up.
Fixes: 3027743f83 ("gpio: Remove VLA from gpiolib")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A patch from Ricardo got me thinking about some gpio chip
semantics so let's drop in some comments to make things
more clear around that.
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In order to make use of array info obtained from gpiod_get_array() and
speed up processing of arrays matching single GPIO chip layout, that
information must be passed to get/set array functions. Extend the
functions' API with that additional parameter and update all users.
Pass NULL if a user builds an array itself from single GPIOs.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rojhalat Ibrahim <imr@rtschenk.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Certain GPIO array lookup results may map directly to GPIO pins of a
single GPIO chip in hardware order. If that condition is recognized
and handled efficiently, significant performance gain of get/set array
functions may be possible.
While processing a request for an array of GPIO descriptors, identify
those which represent corresponding pins of a single GPIO chip. Skip
over pins which require open source or open drain special processing.
Moreover, identify pins which require inversion. Pass a pointer to
that information with the array to the caller so it can benefit from
enhanced performance as soon as get/set array functions can accept and
make efficient use of it.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most users of get/set array functions iterate consecutive bits of data,
usually a single integer, while processing array of results obtained
from, or building an array of values to be passed to those functions.
Save time wasted on those iterations by changing the functions' API to
accept bitmaps.
All current users are updated as well.
More benefits from the change are expected as soon as planned support
for accepting/passing those bitmaps directly from/to respective GPIO
chip callbacks if applicable is implemented.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rojhalat Ibrahim <imr@rtschenk.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When using the gpiolib irqchip helpers install irq_enable/disable
hooks for the irqchip to ensure that gpiolib knows when the irq
is enabled or disabled, allowing drivers to disable the irq and then
use it as an output pin, and later switch the direction to input and
re-enable the irq.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO drivers call gpiochip_(un)lock_as_irq whenever they want to use a gpio
as an interrupt. This is done when the irq is requested and it marks the
gpio as in use by an interrupt.
This is problematic for cases where a gpio pin is used as an interrupt
pin, then, after the irq is disabled, is used as a regular gpio pin.
Currently it is not possible to do this other than by first freeing
the interrupt so gpiochip_unlock_as_irq is called, since an attempt to
switch the gpio direction for output will fail since gpiolib believes
that the gpio is in use for an interrupt and it does not know that it
the irq is actually disabled.
There are currently two drivers that would like to be able to do this:
the tda998x_drv.c driver where a regular gpio pin needs to be temporarily
reconfigured as an interrupt pin during CEC calibration, and the cec-gpio
driver where you want to configure the gpio pin as an interrupt while
waiting for traffic over the CEC bus, or as a regular pin when receiving or
transmitting a CEC message.
The solution is to add a new flag that is set when the irq is enabled,
and have gpiod_direction_output check for that flag.
We also add functions that drivers that do not use GPIOLIB_IRQCHIP
can call when they enable/disable the irq.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO drivers that do not use GPIOLIB_IRQCHIP can hook these into
the irq_request_resource and irq_release_resource callbacks of the
irq_chip so they correctly 'get' the module and lock the gpio line
for IRQ use.
This will simplify driver code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds