There are two predicates in the name of swap_is_has_cache() which is
confusing. Renaming it to remove the confusion and can better reflect its
functionality.
Link: https://lkml.kernel.org/r/20250205092721.9395-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since ci->lock has been taken when isolating cluster from
si->free_clusters or taking si->percpu_cluster->next[order], it's
unnecessary to scan and check the cluster range availability if i'ts empty
cluster, and this can accelerate the huge page swapping.
Link: https://lkml.kernel.org/r/20250205092721.9395-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It doesn't make sense to have a zero value of shift. Remove it to avoid
confusion.
Link: https://lkml.kernel.org/r/20250205092721.9395-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If allocation is racy with swapoff, we may call free_cluster for cluster
already in free list and trigger BUG_ON() as following:
Allocation Swapoff
cluster_alloc_swap_entry
...
/* may get a free cluster with offset */
offset = xxx;
if (offset)
ci = lock_cluster(si, offset);
...
del_from_avail_list(p, true);
si->flags &= ~SWP_WRITEOK;
alloc_swap_scan_cluster(si, ci, ...)
...
/* failed to alloc entry from free entry */
if (!cluster_alloc_range(...))
break;
...
/* add back a free cluster */
relocate_cluster(si, ci);
if (!ci->count)
free_cluster(si, ci);
VM_BUG_ON(ci->flags == CLUSTER_FLAG_FREE);
To prevent the BUG_ON(), call free_cluster() for free cluster to move the
cluster to tail of list.
Check cluster is not free before calling free_cluster() in
relocate_cluster() to avoid BUG_ON().
Link: https://lkml.kernel.org/r/20250222160850.505274-4-shikemeng@huaweicloud.com
Fixes: 3b644773ee ("mm, swap: reduce contention on device lock")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use correct step in loop to wait all clusters in wait_for_allocation().
If we miss some cluster in wait_for_allocation(), use after free may occur
as follows:
shmem_writepage swapoff
folio_alloc_swap
get_swap_pages
scan_swap_map_slots
cluster_alloc_swap_entry
alloc_swap_scan_cluster
cluster_alloc_range
/* SWP_WRITEOK is valid */
if (!(si->flags & SWP_WRITEOK))
...
del_from_avail_list(p, true);
...
/* miss the cluster in shmem_writepage */
wait_for_allocation()
...
try_to_unuse()
memset(si->swap_map + start, usage, nr_pages);
swap_range_alloc(si, nr_pages);
ci->count += nr_pages;
/* return a valid entry */
...
exit_swap_address_space(p->type);
...
...
add_to_swap_cache
/* dereference swap_address_space(entry) which is NULL */
xas_lock_irq(&xas);
Link: https://lkml.kernel.org/r/20250222160850.505274-3-shikemeng@huaweicloud.com
Fixes: 9a0ddeb798 ("mm, swap: hold a reference during scan and cleanup flag usage")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If no swap cache is reclaimed, cluster taken off from full_clusters list
will not be put in any list and we can't reclaime HAS_CACHE slots
efficiently. Do relocate_cluster for such cluster to avoid inefficiency.
Link: https://lkml.kernel.org/r/20250224113910.522439-1-shikemeng@huaweicloud.com
Fixes: 3b644773ee ("mm, swap: reduce contention on device lock")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a NULL check on the return value of swp_swap_info in __swap_duplicate
to prevent crashes caused by NULL pointer dereference.
The reason why swp_swap_info() returns NULL is unclear; it may be due
to CPU cache issues or DDR bit flips. The probability of this issue is
very small - it has been observed to occur approximately 1 in 500,000
times per week. The stack info we encountered is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000058
[RB/E]rb_sreason_str_set: sreason_str set null_pointer
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000008a80e5000
[0000000000000058] pgd=0000000000000000, p4d=0000000000000000,
pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Skip md ftrace buffer dump for: 0x1609e0
...
pc : swap_duplicate+0x44/0x164
lr : copy_page_range+0x508/0x1e78
sp : ffffffc0f2a699e0
x29: ffffffc0f2a699e0 x28: ffffff8a5b28d388 x27: ffffff8b06603388
x26: ffffffdf7291fe70 x25: 0000000000000006 x24: 0000000000100073
x23: 00000000002d2d2f x22: 0000000000000008 x21: 0000000000000000
x20: 00000000002d2d2f x19: 18000000002d2d2f x18: ffffffdf726faec0
x17: 0000000000000000 x16: 0010000000000001 x15: 0040000000000001
x14: 0400000000000001 x13: ff7ffffffffffb7f x12: ffeffffffffffbff
x11: ffffff8a5c7e1898 x10: 0000000000000018 x9 : 0000000000000006
x8 : 1800000000000000 x7 : 0000000000000000 x6 : ffffff8057c01f10
x5 : 000000000000a318 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000006daf200000 x1 : 0000000000000001 x0 : 18000000002d2d2f
Call trace:
swap_duplicate+0x44/0x164
copy_page_range+0x508/0x1e78
copy_process+0x1278/0x21cc
kernel_clone+0x90/0x438
__arm64_sys_clone+0x5c/0x8c
invoke_syscall+0x58/0x110
do_el0_svc+0x8c/0xe0
el0_svc+0x38/0x9c
el0t_64_sync_handler+0x44/0xec
el0t_64_sync+0x1a8/0x1ac
Code: 9139c35a 71006f3f 54000568 f8797b55 (f9402ea8)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
The patch seems to only provide a workaround, but there are no more
effective software solutions to handle the bit flips problem. This path
will change the issue from a system crash to a process exception, thereby
reducing the impact on the entire machine.
akpm: this is probably a kernel bug, but this patch keeps the system
running and doesn't reduce that bug's debuggability.
Link: https://lkml.kernel.org/r/e223b0e6ba2f4924984b1917cc717bd5@honor.com
Signed-off-by: gao xu <gaoxu2@honor.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed. This may cause corruption of the swap
map, so fix it.
Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com
Fixes: 3b644773ee ("mm, swap: reduce contention on device lock")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The slot cache for freeing path is mostly for reducing the overhead of
si->lock. As we have basically eliminated the si->lock usage for freeing
path, it can be removed.
This helps simplify the code, and avoids swap entries from being hold in
cache upon freeing. The delayed freeing of entries have been causing
trouble for further optimizations for zswap [1] and in theory will also
cause more fragmentation, and extra overhead.
Test with build linux kernel showed both performance and fragmentation is
better without the cache:
tiem make -j96 / 768M memcg, 4K pages, 10G ZRAM, avg of 4 test run::
Before:
Sys time: 36047.78, Real time: 472.43
After: (-7.6% sys time, -7.3% real time)
Sys time: 33314.76, Real time: 437.67
time make -j96 / 1152M memcg, 64K mTHP, 10G ZRAM, avg of 4 test run:
Before:
Sys time: 46859.04, Real time: 562.63
hugepages-64kB/stats/swpout: 1783392
hugepages-64kB/stats/swpout_fallback: 240875
After: (-23.3% sys time, -21.3% real time)
Sys time: 35958.87, Real time: 442.69
hugepages-64kB/stats/swpout: 1866267
hugepages-64kB/stats/swpout_fallback: 158330
Sequential SWAP should be also slightly faster, tests didn't show a
measurable difference though, at least no regression:
Swapin 4G zero page on ZRAM (time in us):
Before (avg. 1923756)
1912391 1927023 1927957 1916527 1918263 1914284 1934753 1940813 1921791
After (avg. 1922290):
1919101 1925743 1916810 1917007 1923930 1935152 1917403 1923549 1921913
Link: https://lore.kernel.org/all/CAMgjq7ACohT_uerSz8E_994ZZCv709Zor+43hdmesW_59W1BWw@mail.gmail.com/[1]
Link: https://lkml.kernel.org/r/20250113175732.48099-14-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Non-rotational devices (SSD / ZRAM) can tolerate fragmentation, so the
goal of the SWAP allocator is to avoid contention for clusters. It uses a
per-CPU cluster design, and each CPU will use a different cluster as much
as possible.
However, HDDs are very sensitive to fragmentation, contention is trivial
in comparison. Therefore, we use one global cluster instead. This
ensures that each order will be written to the same cluster as much as
possible, which helps make the I/O more continuous.
This ensures that the performance of the cluster allocator is as good as
that of the old allocator. Tests after this commit compared to those
before this series:
Tested using 'make -j32' with tinyconfig, a 1G memcg limit, and HDD swap:
make -j32 with tinyconfig, using 1G memcg limit and HDD swap:
Before this series:
114.44user 29.11system 39:42.90elapsed 6%CPU (0avgtext+0avgdata 157284maxresident)k
2901232inputs+0outputs (238877major+4227640minor)pagefaults
After this commit:
113.90user 23.81system 38:11.77elapsed 6%CPU (0avgtext+0avgdata 157260maxresident)k
2548728inputs+0outputs (235471major+4238110minor)pagefaults
[ryncsn@gmail.com: check kmalloc() return in setup_clusters]
Link: https://lkml.kernel.org/r/CAMgjq7Au+o04ckHyT=iU-wVx9az=t0B-ZiC5E0bDqNrAtNOP-g@mail.gmail.com
Link: https://lkml.kernel.org/r/20250113175732.48099-13-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's a common operation to retrieve the cluster info from offset,
introduce a helper for this.
Link: https://lkml.kernel.org/r/20250113175732.48099-12-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of using a returning argument, we can simply store the next
cluster offset to the fixed percpu location, which reduce the stack usage
and simplify the function:
Object size:
./scripts/bloat-o-meter mm/swapfile.o mm/swapfile.o.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-271 (-271)
Function old new delta
get_swap_pages 2847 2733 -114
alloc_swap_scan_cluster 894 737 -157
Total: Before=30833, After=30562, chg -0.88%
Stack usage:
Before:
swapfile.c:1190:5:get_swap_pages 240 static
After:
swapfile.c:1185:5:get_swap_pages 216 static
Link: https://lkml.kernel.org/r/20250113175732.48099-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, swap locking is mainly composed of two locks: the cluster lock
(ci->lock) and the device lock (si->lock).
The cluster lock is much more fine-grained, so it is best to use ci->lock
instead of si->lock as much as possible.
We have cleaned up other hard dependencies on si->lock. Following the new
cluster allocator design, most operations don't need to touch si->lock at
all. In practice, we only need to take si->lock when moving clusters
between lists.
To achieve this, this commit reworks the locking pattern of all si->lock
and ci->lock users, eliminates all usage of ci->lock inside si->lock, and
introduces a new design to avoid touching si->lock unless needed.
For minimal contention and easier understanding of the system, two ideas
are introduced with the corresponding helpers: isolation and relocation.
- Clusters will be `isolated` from the list when iterating the list
to search for an allocatable cluster.
This ensures other CPUs won't walk into the same cluster easily,
and it releases si->lock after acquiring ci->lock, providing the
only place that handles the inversion of two locks, and avoids
contention.
Iterating the cluster list almost always moves the cluster
(free -> nonfull, nonfull -> frag, frag -> frag tail), but it
doesn't know where the cluster should be moved to until scanning
is done. So keeping the cluster off-list is a good option with
low overhead.
The off-list time window of a cluster is also minimal. In the worst
case, one CPU will return the cluster after scanning the 512 entries
on it, which we used to busy wait with a spin lock.
This is done with the new helper `isolate_lock_cluster`.
- Clusters will be `relocated` after allocation or freeing, according
to their usage count and status.
Allocations no longer hold si->lock now, and may drop ci->lock for
reclaim, so the cluster could be moved to any location while no lock
is held. Besides, isolation clears all flags when it takes the
cluster off the list (the flags must be in sync with the list status,
so cluster users don't need to touch si->lock for checking its list
status). So the cluster has to be relocated to the right list
according to its usage after allocation or freeing.
Relocation is optional, if the cluster flags indicate it's already
on the right list, it will skip touching the list or si->lock.
This is done with `relocate_cluster` after allocation or with
`[partial_]free_cluster` after freeing.
This handled usage of all kinds of clusters in a clean way.
Scanning and allocation by iterating the cluster list is handled by
"isolate - <scan / allocate> - relocate".
Scanning and allocation of per-CPU clusters will only involve
"<scan / allocate> - relocate", as it knows which cluster to lock
and use.
Freeing will only involve "relocate".
Each CPU will keep using its per-CPU cluster until the 512 entries
are all consumed. Freeing also has to free 512 entries to trigger
cluster movement in the best case, so si->lock is rarely touched.
Testing with building the Linux kernel with defconfig showed huge
improvement:
tiem make -j96 / 768M memcg, 4K pages, 10G ZRAM, on Intel 8255C:
Before:
Sys time: 73578.30, Real time: 864.05
After: (-50.7% sys time, -44.8% real time)
Sys time: 36227.49, Real time: 476.66
time make -j96 / 1152M memcg, 64K mTHP, 10G ZRAM, on Intel 8255C:
(avg of 4 test run)
Before:
Sys time: 74044.85, Real time: 846.51
hugepages-64kB/stats/swpout: 1735216
hugepages-64kB/stats/swpout_fallback: 430333
After: (-40.4% sys time, -37.1% real time)
Sys time: 44160.56, Real time: 532.07
hugepages-64kB/stats/swpout: 1786288
hugepages-64kB/stats/swpout_fallback: 243384
time make -j32 / 512M memcg, 4K pages, 5G ZRAM, on AMD 7K62:
Before:
Sys time: 8098.21, Real time: 401.3
After: (-22.6% sys time, -12.8% real time )
Sys time: 6265.02, Real time: 349.83
The allocation success rate also slightly improved as we sanitized the
usage of clusters with new defined helpers, previously dropping
si->lock or ci->lock during scan will cause cluster order shuffle.
Link: https://lkml.kernel.org/r/20250113175732.48099-10-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, we are only using flags to indicate which list the cluster is
on. Using one bit for each list type might be a waste, as the list type
grows, we will consume too many bits. Additionally, the current mixed
usage of '&' and '==' is a bit confusing.
Make it clean by using an enum to define all possible cluster statuses.
Only an off-list cluster will have the NONE (0) flag. And use a wrapper
to annotate and sanitize all flag settings and list movements.
Link: https://lkml.kernel.org/r/20250113175732.48099-9-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The flag SWP_SCANNING was used as an indicator of whether a device is
being scanned for allocation, and prevents swapoff. Combined with
SWP_WRITEOK, they work as a set of barriers for a clean swapoff:
1. Swapoff clears SWP_WRITEOK, allocation requests will see
~SWP_WRITEOK and abort as it's serialized by si->lock.
2. Swapoff unuses all allocated entries.
3. Swapoff waits for SWP_SCANNING flag to be cleared, so ongoing
allocations will stop, preventing UAF.
4. Now swapoff can free everything safely.
This will make the allocation path have a hard dependency on si->lock.
Allocation always have to acquire si->lock first for setting SWP_SCANNING
and checking SWP_WRITEOK.
This commit removes this flag, and just uses the existing per-CPU refcount
instead to prevent UAF in step 3, which serves well for such usage without
dependency on si->lock, and scales very well too. Just hold a reference
during the whole scan and allocation process. Swapoff will kill and wait
for the counter.
And for preventing any allocation from happening after step 1 so the unuse
in step 2 can ensure all slots are free, swapoff will acquire the ci->lock
of each cluster one by one to ensure all allocations see ~SWP_WRITEOK and
abort.
This way these dependences on si->lock are gone. And worth noting we
can't kill the refcount as the first step for swapoff as the unuse process
have to acquire the refcount.
Link: https://lkml.kernel.org/r/20250113175732.48099-8-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the swap device is full (inuse_pages == pages), it should be removed
from the allocation available plist. If any slot is freed, the swap
device should be added back to the plist. Additionally, during swapon or
swapoff, the swap device is forcefully added or removed.
Currently, the condition (inuse_pages == pages) is checked after every
counter update, then remove or add the device accordingly. This is
serialized by si->lock.
This commit decouples it from the protection of si->lock and reworked
plist removal and adding, making it possible to get rid of the hard
dependency on si->lock in allocation path in later commits.
To achieve this, simply using another lock is not an optimal approach, as
the overhead is observable for a hot counter, and may cause complex
locking issues. Thus, this commit manages to make it a lock-free atomic
operation, by embedding the plist state into the second highest bit of the
atomic counter.
Simply making the counter an atomic will not work, if the update and plist
status check are not performed atomically, we may miss an addition or
removal. With the embedded info we can update the counter and check the
plist status with single atomic operations, and avoid any extra overheads:
If the counter is full (inuse_pages == pages) and the off-list bit is
unset, we attempt to remove it from the plist. If the counter is not full
(inuse_pages != pages) and the off-list bit is set, we attempt to add it
to the plist. Removing, adding and bit update is serialized with a lock,
which is a cold path. Ordinary counter updates will be lock-free.
Link: https://lkml.kernel.org/r/20250113175732.48099-7-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove highest_bit and lowest_bit. After the HDD allocation path has been
removed, the only purpose of these two fields is to determine whether the
device is full or not, which can instead be determined by checking the
inuse_pages.
Link: https://lkml.kernel.org/r/20250113175732.48099-6-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cluster lock (ci->lock) was introduced to reduce contention for certain
operations. Using cluster lock for HDD is not helpful as HDD have a poor
performance, so locking isn't the bottleneck. But having different set of
locks for HDD / non-HDD prevents further rework of device lock (si->lock).
This commit just changed all lock_cluster_or_swap_info to lock_cluster,
which is a safe and straight conversion since cluster info is always
allocated now, also removed all cluster_info related checks.
Link: https://lkml.kernel.org/r/20250113175732.48099-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are currently using different swap allocation algorithm for HDD and
non-HDD. This leads to the existence of a different set of locks, and the
code path is heavily bloated, causing difficulties for further
optimization and maintenance.
This commit removes all HDD swap allocation and related dead code, and
uses the cluster allocation algorithm instead.
The performance may drop temporarily, but this should be negligible: The
main advantage of the legacy HDD allocation algorithm is that it tends to
use continuous slots, but swap device gets fragmented quickly anyway, and
the attempt to use continuous slots will fail easily.
This commit also enables mTHP swap on HDD, which is expected to be
beneficial, and following commits will adapt and optimize the cluster
allocator for HDD.
Link: https://lkml.kernel.org/r/20250113175732.48099-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Suggested-by: "Huang, Ying" <ying.huang@linux.alibaba.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name of the function is confusing, and the code is much easier to
follow after folding, also rename the confusing naming "p" to more
meaningful "si".
Link: https://lkml.kernel.org/r/20250113175732.48099-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, swap: rework of swap allocator locks", v4.
This series greatly improved swap performance by reworking the locking
design and simplify a lot of code path. Test showed a up to 400%
vm-scalability improvement with pmem as SWAP, and up to 37% reduce of
kernel compile real time with ZRAM as SWAP (up to 60% improvement in
system time).
This is part of the new swap allocator discussed during the "Swap
Abstraction" discussion at LSF/MM 2024, and "mTHP and swap allocator"
discussion at LPC 2024.
This is a follow up of previous swap cluster allocator series:
https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/
Also enables further optimizations which will come later.
Previous series introduced a fully cluster based allocator, this series
completely get rid of the old allocator and makes the new allocator avoid
touching the si->lock unless needed. This bring huge performance gain and
get rid of slot cache for freeing path.
Currently, swap locking is mainly composed of two locks, cluster lock
(ci->lock) and device lock (si->lock). The device lock is widely used to
protect many things, causing it to be the main bottleneck for SWAP.
Cluster lock is much more fine-grained, so it will be best to use ci->lock
instead of si->lock as much as possible.
`perf lock' indicates this issue clearly. Doing linux kernel build using
tmpfs and ZRAM with limited memory (make -j64 with 1G memcg and 4k pages),
result of "perf lock contention -ab sleep 3" shows:
contended total wait max wait avg wait type caller
34948 53.63 s 7.11 ms 1.53 ms spinlock free_swap_and_cache_nr+0x350
16569 40.05 s 6.45 ms 2.42 ms spinlock get_swap_pages+0x231
11191 28.41 s 7.03 ms 2.54 ms spinlock swapcache_free_entries+0x59
4147 22.78 s 122.66 ms 5.49 ms spinlock page_vma_mapped_walk+0x6f3
4595 7.17 s 6.79 ms 1.56 ms spinlock swapcache_free_entries+0x59
406027 2.74 s 2.59 ms 6.74 us spinlock list_lru_add+0x39
...snip...
The top 5 caller are all users of si->lock, total wait time sums to
several minutes in the 3 seconds time window.
Following the new allocator design, many operation doesn't need to touch
si->lock at all. We only need to take si->lock when doing operations
across multiple clusters (changing the cluster list). So ideally
allocator should always take ci->lock first, then take si->lock only if
needed. But due to historical reasons, ci->lock is used inside si->lock
critical section, causing lock inversion if we simply try to acquire
si->lock after acquiring ci->lock.
This series audited all si->lock usage, clean up legacy codes, eliminate
usage of si->lock as much as possible by introducing new designs based on
the new cluster allocator.
Old HDD allocation codes are removed, cluster allocator is adapted with
small changes for HDD usage, test is looking OK.
And this also removed slot cache for freeing path. The performance is
even better without it now, and this enables other clean up and
optimizations as discussed before:
https://lore.kernel.org/all/CAMgjq7ACohT_uerSz8E_994ZZCv709Zor+43hdmesW_59W1BWw@mail.gmail.com/
After this series, lock contention on si->lock is nearly unobservable
with `perf lock` with the same test above:
contended total wait max wait avg wait type caller
... snip ...
52 127.12 us 3.82 us 2.44 us spinlock move_cluster+0x2c
56 120.77 us 12.41 us 2.16 us spinlock move_cluster+0x2c
... snip ...
10 21.96 us 2.78 us 2.20 us spinlock isolate_lock_cluster+0x20
... snip ...
9 19.27 us 2.70 us 2.14 us spinlock move_cluster+0x2c
... snip ...
5 11.07 us 2.70 us 2.21 us spinlock isolate_lock_cluster+0x20
`move_cluster' and `isolate_lock_cluster' (two new introduced helper) are
basically the only users of si->lock now, performance gain is huge, and
LOC is reduced.
Tests Results:
vm-scalability
==============
Running `usemem --init-time -O -y -x -R -31 1G` from vm-scalability in a
12G memory cgroup using simulated pmem as SWAP backend (32G pmem, 32
CPUs).
Using 4K folio by default, 64k mTHP and sequential access (!-R) results
are also provided. 6 test runs for each case, Total Throughput:
Test Before (KB/s) (stdev) After (KB/s) (stdev) Delta
---------------------------------------------------------------------------
Random (4K): 69937.11 (16449.77) 369816.17 (24476.68) +428.78%
Random (64k): 123442.83 (13207.51) 216379.00 (25024.83) +75.28%
Sequential (4K): 6313909.83 (148856.12) 6419860.66 (183563.38) +1.7%
Sequential access will cause lower stress for the allocator so the gain is
limited, but with random access (which is much closer to real workloads)
the performance gain is huge.
Build kernel with defconfig on tmpfs with ZRAM
==============================================
Below results shows a test matrix using different memory cgroup limit and
job numbets, and scaled up progressive for a intuitive result. Done on a
48c96t system.
6 test run for each case, it can be seen clearly that as concurrent job
number goes higher the performance gain is higher, but even -j6 is showing
slight improvement.
make -j<NR> | System Time (seconds) | Total Time (seconds)
(NR / Mem / ZRAM) | (Before / After / Delta) | (Before / After / Delta)
With 4k pages only:
6 / 192M / 3G | 1533 / 1522 / -0.7% | 1420 / 1414 / -0.3%
12 / 256M / 4G | 2275 / 2226 / -2.2% | 758 / 742 / -2.1%
24 / 384M / 5G | 3596 / 3154 / -12.3% | 476 / 422 / -11.3%
48 / 768M / 7G | 8159 / 3605 / -55.8% | 330 / 221 / -33.0%
96 / 1.5G / 10G | 18541 / 6462 / -65.1% | 283 / 180 / -36.4%
With 64k mTHP:
24 / 512M / 5G | 3585 / 3469 / -3.2% | 293 / 290 / -0.1%
48 / 1G / 7G | 8173 / 3607 / -55.9% | 251 / 158 / -37.0%
96 / 2G / 10G | 16305 / 7791 / -52.2% | 226 / 144 / -36.3%
The fragmentation are reduced too:
With: make -j96 / 1152M memcg, 64K mTHP:
(avg of 4 test run)
Before:
hugepages-64kB/stats/swpout: 1696184
hugepages-64kB/stats/swpout_fallback: 414318
After: (-63.2% mTHP swapout failure)
hugepages-64kB/stats/swpout: 1866267
hugepages-64kB/stats/swpout_fallback: 158330
There is a up to 65.1% improvement in sys time for build kernel test,
and lower fragmentation rate.
Build kernel with tinyconfig on tmpfs with HDD as swap:
=======================================================
This test is similar to above, but HDD test is very noisy and slow, the
deviation is huge, so just use tinyconfig instead and take the median test
result of 3 test run, which looks OK:
Before this series:
114.44user 29.11system 39:42.90elapsed 6%CPU
2901232inputs+0outputs (238877major+4227640minor)pagefaults
After this commit:
113.90user 23.81system 38:11.77elapsed 6%CPU
2548728inputs+0outputs (235471major+4238110minor)pagefaults
Single thread SWAP:
===================
Sequential SWAP should also be slightly faster as we removed a lot of
unnecessary parts. Test using micro benchmark for swapout/in 4G
zero memory using ZRAM, 10 test runs:
Swapout Before (avg. 3359304):
3353796 3358551 3371305 3356043 3367524 3355303 3355924 3354513 3360776
Swapin Before (avg. 1928698):
1920283 1927183 1934105 1921373 1926562 1938261 1927726 1928636 1934155
Swapout After (avg. 3347511, -0.4%):
3337863 3347948 3355235 3339081 3333134 3353006 3354917 3346055 3360359
Swapin After (avg. 1922290, -0.3%):
1919101 1925743 1916810 1917007 1923930 1935152 1917403 1923549 1921913
The gain is limited at noise level but seems slightly better.
This patch (of 13):
Direct reclaim can skip the whole folio after reclaimed a set of folio
based slots. Also simplify the code for allocation, reduce indention.
Link: https://lkml.kernel.org/r/20250113175732.48099-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250113175732.48099-2-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chis Li <chrisl@kernel.org> (Google)
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two flags used to synchronize allocation and scanning with
swapoff: SWP_WRITEOK and SWP_SCANNING.
SWP_WRITEOK: Swapoff will first unset this flag, at this point any further
swap allocation or scanning on this device should just abort so no more
new entries will be referencing this device. Swapoff will then unuse all
existing swap entries.
SWP_SCANNING: This flag is set when device is being scanned. Swapoff will
wait for all scanner to stop before the final release of the swap device
structures to avoid UAF. Note this flag is the highest used bit of
si->flags so it could be added up arithmetically, if there are multiple
scanner.
commit 5f843a9a3a ("mm: swap: separate SSD allocation from
scan_swap_map_slots()") ignored SWP_SCANNING and SWP_WRITEOK flags while
separating cluster allocation path from the old allocation path. Add the
flags back to fix swapoff race. The race is hard to trigger as si->lock
prevents most parallel operations, but si->lock could be dropped for
reclaim or discard. This issue is found during code review.
This commit fixes this problem. For SWP_SCANNING, Just like before, set
the flag before scan and remove it afterwards.
For SWP_WRITEOK, there are several places where si->lock could be dropped,
it will be error-prone and make the code hard to follow if we try to cover
these places one by one. So just do one check before the real allocation,
which is also very similar like before. With new cluster allocator it may
waste a bit of time iterating the clusters but won't take long, and
swapoff is not performance sensitive.
Link: https://lkml.kernel.org/r/20241112083414.78174-1-ryncsn@gmail.com
Fixes: 5f843a9a3a ("mm: swap: separate SSD allocation from scan_swap_map_slots()")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/linux-mm/87a5es3f1f.fsf@yhuang6-desk2.ccr.corp.intel.com/
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running low on usable slots, cluster allocator will try to reclaim
the full clusters aggressively to reclaim HAS_CACHE slots. This
guarantees that as long as there are any usable slots, HAS_CACHE or not,
the swap device will be usable and workload won't go OOM early.
Before the cluster allocator, swap allocator fails easily if device is
filled up with reclaimable HAS_CACHE slots. Which can be easily
reproduced with following simple program:
#include <stdio.h>
#include <string.h>
#include <linux/mman.h>
#include <sys/mman.h>
#define SIZE 8192UL * 1024UL * 1024UL
int main(int argc, char **argv) {
long tmp;
char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
memset(p, 0, SIZE);
madvise(p, SIZE, MADV_PAGEOUT);
for (unsigned long i = 0; i < SIZE; ++i)
tmp += p[i];
getchar(); /* Pause */
return 0;
}
Setup an 8G non ramdisk swap, the first run of the program will swapout 8G
ram successfully. But run same program again after the first run paused,
the second run can't swapout all 8G memory as now half of the swap device
is pinned by HAS_CACHE. There was a random scan in the old allocator that
may reclaim part of the HAS_CACHE by luck, but it's unreliable.
The new allocator's added reclaim of full clusters when device is low on
usable slots. But when multiple CPUs are seeing the device is low on
usable slots at the same time, they ran into a thundering herd problem.
This is an observable problem on large machine with mass parallel
workload, as full cluster reclaim is slower on large swap device and
higher number of CPUs will also make things worse.
Testing using a 128G ZRAM on a 48c96t system. When the swap device is
very close to full (eg. 124G / 128G), running build linux kernel with
make -j96 in a 1G memory cgroup will hung (not a softlockup though)
spinning in full cluster reclaim for about ~5min before go OOM.
To solve this, split the full reclaim into two parts:
- Instead of do a synchronous aggressively reclaim when device is low,
do only one aggressively reclaim when device is strictly full with a
kworker. This still ensures in worst case the device won't be unusable
because of HAS_CACHE slots.
- To avoid allocation (especially higher order) suffer from HAS_CACHE
filling up clusters and kworker not responsive enough, do one synchronous
scan every time the free list is drained, and only scan one cluster. This
is kind of similar to the random reclaim before, keeps the full clusters
rotated and has a minimal latency. This should provide a fair reclaim
strategy suitable for most workloads.
Link: https://lkml.kernel.org/r/20241022175512.10398-1-ryncsn@gmail.com
Fixes: 2cacbdfdee ("mm: swap: add a adaptive full cluster cache reclaim")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A report [1] was uploaded from syzbot.
In the previous commit 862590ac37 ("mm: swap: allow cache reclaim to
skip slot cache"), the __try_to_reclaim_swap() function reads offset and
folio->entry from folio without folio_lock protection.
In the currently reported KCSAN log, it is assumed that the actual
data-race will not occur because the calltrace that does WRITE already
obtains the folio_lock and then writes.
However, the existing __try_to_reclaim_swap() function was already
implemented to perform reads under folio_lock protection [1], and there is
a risk of a data-race occurring through a function other than the one
shown in the KCSAN log.
Therefore, I think it is appropriate to change
read operations for folio to be performed under folio_lock.
[1]
==================================================================
BUG: KCSAN: data-race in __delete_from_swap_cache / __try_to_reclaim_swap
write to 0xffffea0004c90328 of 8 bytes by task 5186 on cpu 0:
__delete_from_swap_cache+0x1f0/0x290 mm/swap_state.c:163
delete_from_swap_cache+0x72/0xe0 mm/swap_state.c:243
folio_free_swap+0x1d8/0x1f0 mm/swapfile.c:1850
free_swap_cache mm/swap_state.c:293 [inline]
free_pages_and_swap_cache+0x1fc/0x410 mm/swap_state.c:325
__tlb_batch_free_encoded_pages mm/mmu_gather.c:136 [inline]
tlb_batch_pages_flush mm/mmu_gather.c:149 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:366 [inline]
tlb_flush_mmu+0x2cf/0x440 mm/mmu_gather.c:373
zap_pte_range mm/memory.c:1700 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0x1f3c/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
do_group_exit+0x102/0x150 kernel/exit.c:1088
get_signal+0xf2a/0x1070 kernel/signal.c:2917
arch_do_signal_or_restart+0x95/0x4b0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x59/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffffea0004c90328 of 8 bytes by task 5189 on cpu 1:
__try_to_reclaim_swap+0x9d/0x510 mm/swapfile.c:198
free_swap_and_cache_nr+0x45d/0x8a0 mm/swapfile.c:1915
zap_pte_range mm/memory.c:1656 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0xcf8/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
__do_sys_exit kernel/exit.c:1055 [inline]
__se_sys_exit kernel/exit.c:1053 [inline]
__x64_sys_exit+0x1f/0x20 kernel/exit.c:1053
x64_sys_call+0x2d46/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:61
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000242 -> 0x0000000000000000
Link: https://lkml.kernel.org/r/20241007070623.23340-1-aha310510@gmail.com
Reported-by: syzbot+fa43f1b63e3aa6f66329@syzkaller.appspotmail.com
Fixes: 862590ac37 ("mm: swap: allow cache reclaim to skip slot cache")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Retrieve a folio from the page cache rather than a page. Saves a couple
of conversions between page & folio.
Link: https://lkml.kernel.org/r/20240826202138.3804238-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: store zero pages to be swapped out in a bitmap", v8.
As shown in the patch series that introduced the zswap same-filled
optimization [1], 10-20% of the pages stored in zswap are same-filled.
This is also observed across Meta's server fleet. By using VM counters in
swap_writepage (not included in this patchseries) it was found that less
than 1% of the same-filled pages to be swapped out are non-zero pages.
For conventional swap setup (without zswap), rather than reading/writing
these pages to flash resulting in increased I/O and flash wear, a bitmap
can be used to mark these pages as zero at write time, and the pages can
be filled at read time if the bit corresponding to the page is set.
When using zswap with swap, this also means that a zswap_entry does not
need to be allocated for zero filled pages resulting in memory savings
which would offset the memory used for the bitmap.
A similar attempt was made earlier in [2] where zswap would only track
zero-filled pages instead of same-filled. This patchseries adds
zero-filled pages optimization to swap (hence it can be used even if zswap
is disabled) and removes the same-filled code from zswap (as only 1% of
the same-filled pages are non-zero), simplifying code.
[1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/
[2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/
This patch (of 2):
Approximately 10-20% of pages to be swapped out are zero pages [1].
Rather than reading/writing these pages to flash resulting
in increased I/O and flash wear, a bitmap can be used to mark these
pages as zero at write time, and the pages can be filled at
read time if the bit corresponding to the page is set.
With this patch, NVMe writes in Meta server fleet decreased
by almost 10% with conventional swap setup (zswap disabled).
[1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/
Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We've been noticing a trend of significant lock contention in the swap
subsystem as core counts have been increasing in our fleet. It turns out
that our swapfiles on btrfs on flash were in fact using the old swap code
for rotational storage.
This turns out to be a detection issue in the swapon sequence: btrfs sets
si->bdev during swap activation, which currently happens *after* swapon's
SSD detection and cluster setup. Thus, none of the SSD optimizations and
cluster lock splitting are enabled for btrfs swap.
Rearrange the swapon sequence so that filesystem activation happens
*before* determining swap behavior based on the backing device.
Afterwards, the nonrotational drive is detected correctly:
- Adding 2097148k swap on /mnt/swapfile. Priority:-3 extents:1 across:2097148k
+ Adding 2097148k swap on /mnt/swapfile. Priority:-3 extents:1 across:2097148k SS
Link: https://lkml.kernel.org/r/20240822112707.351844-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support large folio swap-out and swap-in for shmem", v5.
Shmem will support large folio allocation [1] [2] to get a better
performance, however, the memory reclaim still splits the precious large
folios when trying to swap-out shmem, which may lead to the memory
fragmentation issue and can not take advantage of the large folio for
shmeme.
Moreover, the swap code already supports for swapping out large folio
without split, and large folio swap-in[3] series is queued into
mm-unstable branch. Hence this patch set also supports the large folio
swap-out and swap-in for shmem.
This patch (of 9):
To support shmem large folio swap operations, add a new parameter to
swap_shmem_alloc() that allows batch SWAP_MAP_SHMEM flag setting for shmem
swap entries.
While we are at it, using folio_nr_pages() to get the number of pages of
the folio as a preparation.
Link: https://lkml.kernel.org/r/cover.1723434324.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/99f64115d04b285e009580eb177352c57119ffd0.1723434324.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhiguo reported that swap release could be a serious bottleneck during
process exits[1]. With mTHP, we have the opportunity to batch free swaps.
Thanks to the work of Chris and Kairui[2], I was able to achieve this
optimization with minimal code changes by building on their efforts.
If swap_count is 1, which is likely true as most anon memory are private,
we can free all contiguous swap slots all together.
Ran the below test program for measuring the bandwidth of munmap
using zRAM and 64KiB mTHP:
#include <sys/mman.h>
#include <sys/time.h>
#include <stdlib.h>
unsigned long long tv_to_ms(struct timeval tv)
{
return tv.tv_sec * 1000 + tv.tv_usec / 1000;
}
main()
{
struct timeval tv_b, tv_e;
int i;
#define SIZE 1024*1024*1024
void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (!p) {
perror("fail to get memory");
exit(-1);
}
madvise(p, SIZE, MADV_HUGEPAGE);
memset(p, 0x11, SIZE); /* write to get mem */
madvise(p, SIZE, MADV_PAGEOUT);
gettimeofday(&tv_b, NULL);
munmap(p, SIZE);
gettimeofday(&tv_e, NULL);
printf("munmap in bandwidth: %ld bytes/ms\n",
SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b)));
}
The result is as below (munmap bandwidth):
mm-unstable mm-unstable-with-patch
round1 21053761 63161283
round2 21053761 63161283
round3 21053761 63161283
round4 20648881 67108864
round5 20648881 67108864
munmap bandwidth becomes 3X faster.
[1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/
[2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/
[v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()]
Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com
[hughd@google.com: add mem_cgroup_disabled() check]
Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com
[21cnbao@gmail.com: add missing zswap_invalidate()]
Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: batch free swaps for zap_pte_range()", v3.
Batch free swap slots for zap_pte_range(), making munmap three times
faster when the page table entries are filled with swap entries to
be freed. This is likely another advantage of using mTHP.
This patch (of 3):
"p" means "pointer to something", rename it to a more meaningful
identifier - "si". We also have a case with the name "sis", rename it to
"si" as well.
Link: https://lkml.kernel.org/r/20240807215859.57491-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240807215859.57491-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zhiguo Jiang <justinjiang@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link all full cluster with one full list, and reclaim from it when the
allocation have ran out of all usable clusters.
There are many reason a folio can end up being in the swap cache while
having no swap count reference. So the best way to search for such slots
is still by iterating the swap clusters.
With the list as an LRU, iterating from the oldest cluster and keep them
rotating is a very doable and clean way to free up potentially not inuse
clusters.
When any allocation failure, try reclaim and rotate only one cluster.
This is adaptive for high order allocations they can tolerate fallback.
So this avoids latency, and give the full cluster list an fair chance to
get reclaimed. It release the usage stress for the fallback order 0
allocation or following up high order allocation.
If the swap device is getting very full, reclaim more aggresively to
ensure no OOM will happen. This ensures order 0 heavy workload won't go
OOM as order 0 won't fail if any cluster still have any space.
[ryncsn@gmail.com: fix discard of full cluster]
Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit implements reclaim during scan for cluster allocator.
Cluster scanning were unable to reuse SWAP_HAS_CACHE slots, which could
result in low allocation success rate or early OOM.
So to ensure maximum allocation success rate, integrate reclaiming with
scanning. If found a range of suitable swap slots but fragmented due to
HAS_CACHE, just try to reclaim the slots.
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-8-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now swap cluster allocator arranges the clusters in LRU style, so the
"cold" cluster stay at the head of nonfull lists are the ones that were
used for allocation long time ago and still partially occupied. So if
allocator can't find enough contiguous slots to satisfy an high order
allocation, it's unlikely there will be slot being free on them to satisfy
the allocation, at least in a short period.
As a result, nonfull cluster scanning will waste time repeatly scanning
the unusable head of the list.
Also, multiple CPUs could content on the same head cluster of nonfull
list. Unlike free clusters which are removed from the list when any CPU
starts using it, nonfull cluster stays on the head.
So introduce a new list frag list, all scanned nonfull clusters will be
moved to this list. Both for avoiding repeated scanning and contention.
Frag list is still used as fallback for allocations, so if one CPU failed
to allocate one order of slots, it can still steal other CPU's clusters.
And order 0 will favor the fragmented clusters to better protect nonfull
clusters
If any slots on a fragment list are being freed, move the fragment list
back to nonfull list indicating it worth another scan on the cluster.
Compared to scan upon freeing a slot, this keep the scanning lazy and save
some CPU if there are still other clusters to use.
It may seems unneccessay to keep the fragmented cluster on list at all if
they can't be used for specific order allocation. But this will start to
make sense once reclaim dring scanning is ready.
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we free the reclaimed slots through slot cache even if the slot
is required to be empty immediately. As a result the reclaim caller will
see the slot still occupied even after a successful reclaim, and need to
keep reclaiming until slot cache get flushed. This caused ineffective or
over reclaim when SWAP is under stress.
So introduce a new flag allowing the slot to be emptied bypassing the slot
cache.
[21cnbao@gmail.com: small folios should have nr_pages == 1 but not nr_page == 0]
Link: https://lkml.kernel.org/r/20240805015324.45134-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-6-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently when we are freeing mTHP folios from swap cache, we free then
one by one and put each entry into swap slot cache. Slot cache is
designed to reduce the overhead by batching the freeing, but mTHP swap
entries are already continuous so they can be batch freed without it
already, it saves litle overhead, or even increase overhead for larger
mTHP.
What's more, mTHP entries could stay in swap cache for a while.
Contiguous swap entry is an rather rare resource so releasing them
directly can help improve mTHP allocation success rate when under
pressure.
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-5-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At this point, alloc_cluster is never called already, and
inc_cluster_info_page is called by initialization only, a lot of dead code
can be dropped.
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-4-cb9c148b9297@kernel.org
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously the SSD and HDD share the same swap_map scan loop in
scan_swap_map_slots(). This function is complex and hard to flow the
execution flow.
scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting
to locate the candidate swap range in the cluster. However it needs to go
back to scan_swap_map_slots() to check conflict and then perform the
allocation.
When scan_swap_map_try_ssd_cluster() failed, it still depended on the
scan_swap_map_slots() to do brute force scanning of the swap_map. When
the swapfile is large and almost full, it will take some CPU time to go
through the swap_map array.
Get rid of the cluster allocation dependency on the swap_map scan loop in
scan_swap_map_slots(). Streamline the cluster allocation code path. No
more conflict checks.
For order 0 swap entry, when run out of free and nonfull list. It will
allocate from the higher order nonfull cluster list.
Users should see less CPU time spent on searching the free swap slot when
swapfile is almost full.
[ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n]
Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Track the nonfull cluster as well as the empty cluster on lists. Each
order has one nonfull cluster list.
The cluster will remember which order it was used during new cluster
allocation.
When the cluster has free entry, add to the nonfull[order] list. When
the free cluster list is empty, also allocate from the nonempty list of
that order.
This improves the mTHP swap allocation success rate.
There are limitations if the distribution of numbers of different orders
of mTHP changes a lot. e.g. there are a lot of nonfull cluster assign to
order A while later time there are a lot of order B allocation while very
little allocation in order A. Currently the cluster used by order A will
not reused by order B unless the cluster is 100% empty.
Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-2-cb9c148b9297@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Reported-by: Barry Song <21cnbao@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The unuse_pte_range() caller only wants the folio while do_swap_page()
wants both the page and the folio. Since do_swap_page() already has logic
for handling both the folio and the page, move the folio-to-page logic
there. This also lets us allocate larger folios in the SWP_SYNCHRONOUS_IO
path in future.
Link: https://lkml.kernel.org/r/20240807193734.1865400-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Right now, swapcache_prepare() and swapcache_clear() supports one entry
only, to support large folios, we need to handle multiple swap entries.
To optimize stack usage, we iterate twice in __swap_duplicate(): the first
time to verify that all entries are valid, and the second time to apply
the modifications to the entries.
Currently, we're using nr=1 for the existing users.
[v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate]
Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend a usage parameter so that cluster_swap_free_nr() can be reused by
both swapcache_clear() and swap_free(). __swap_entry_free() is quite
similar but more tricky as it requires the return value of
__swap_entry_free_locked() which cluster_swap_free_nr() doesn't support.
Link: https://lkml.kernel.org/r/20240724020056.65838-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the !folio_test_anon(folio) case, we can now invoke
folio_add_new_anon_rmap() with the rmap flags set to either EXCLUSIVE or
non-EXCLUSIVE. This action will suppress the VM_WARN_ON_FOLIO check
within __folio_add_anon_rmap() while initiating the process of bringing up
mTHP swapin.
static __always_inline void __folio_add_anon_rmap(struct folio *folio,
struct page *page, int nr_pages, struct vm_area_struct *vma,
unsigned long address, rmap_t flags, enum rmap_level level)
{
...
if (unlikely(!folio_test_anon(folio))) {
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
level != RMAP_LEVEL_PMD, folio);
}
...
}
It also improves the code's readability. Currently, all new anonymous
folios calling folio_add_anon_rmap_ptes() are order-0. This ensures that
new folios cannot be partially exclusive; they are either entirely
exclusive or entirely shared.
A useful comment from Hugh's fix:
: Commit "mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)==
: false" has extended folio_add_new_anon_rmap() to use on non-exclusive
: folios, already visible to others in swap cache and on LRU.
:
: That renders its non-atomic __folio_set_swapbacked() unsafe: it risks
: overwriting concurrent atomic operations on folio->flags, losing bits
: added or restoring bits cleared. Since it's only used in this risky way
: when folio_test_locked and !folio_test_anon, many such races are excluded;
: but, for example, isolations by folio_test_clear_lru() are vulnerable, and
: setting or clearing active.
:
: It could just use the atomic folio_set_swapbacked(); but this function
: does try to avoid atomics where it can, so use a branch instead: just
: avoid setting swapbacked when it is already set, that is good enough.
: (Swapbacked is normally stable once set: lazyfree can undo it, but only
: later, when found anon in a page table.)
:
: This fixes a lot of instability under compaction and swapping loads:
: assorted "Bad page"s, VM_BUG_ON_FOLIO()s, apparently even page double
: frees - though I've not worked out what races could lead to the latter.
[akpm@linux-foundation.org: comment fixes, per David and akpm]
[v-songbaohua@oppo.com: lock the folio to avoid race]
Link: https://lkml.kernel.org/r/20240622032002.53033-1-21cnbao@gmail.com
[hughd@google.com: folio_add_new_anon_rmap() careful __folio_set_swapbacked()]
Link: https://lkml.kernel.org/r/f3599b1d-8323-0dc5-e9e0-fdb3cfc3dd5a@google.com
Link: https://lkml.kernel.org/r/20240617231137.80726-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()", v2.
This patchset is preparatory work for mTHP swapin.
folio_add_new_anon_rmap() assumes that new anon rmaps are always
exclusive. However, this assumption doesn’t hold true for cases like
do_swap_page(), where a new anon might be added to the swapcache and is
not necessarily exclusive.
The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to
handle both exclusive and non-exclusive new anon folios. The
do_swap_page() function is updated to use this extended API with rmap
flags. Consequently, all new anon folios now consistently use
folio_add_new_anon_rmap(). The special case for !folio_test_anon() in
__folio_add_anon_rmap() can be safely removed.
In conclusion, new anon folios always use folio_add_new_anon_rmap(),
regardless of exclusivity. Old anon folios continue to use
__folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and
folio_add_anon_rmap_ptes().
This patch (of 3):
In the case of a swap-in, a new anonymous folio is not necessarily
exclusive. This patch updates the rmap flags to allow a new anonymous
folio to be treated as either exclusive or non-exclusive. To maintain the
existing behavior, we always use EXCLUSIVE as the default setting.
[akpm@linux-foundation.org: cleanup and constifications per David and akpm]
[v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()]
Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com
[v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap]
Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To streamline maintenance efforts, we propose removing the implementation
of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set
to 1. swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.
A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c. Implementing this change facilitates the adoption of
batch processing for hibernation.
Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "large folios swap-in: handle refault cases first", v5.
This patchset is extracted from the large folio swapin series[1],
primarily addressing the handling of scenarios involving large folios in
the swap cache. Currently, it is particularly focused on addressing the
refaulting of mTHP, which is still undergoing reclamation. This approach
aims to streamline code review and expedite the integration of this
segment into the MM tree.
It relies on Ryan's swap-out series[2], leveraging the helper function
swap_pte_batch() introduced by that series.
Presently, do_swap_page only encounters a large folio in the swap cache
before the large folio is released by vmscan. However, the code should
remain equally useful once we support large folio swap-in via
swapin_readahead(). This approach can effectively reduce page faults and
eliminate most redundant checks and early exits for MTE restoration in
recent MTE patchset[3].
The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will
be split into separate patch sets and sent at a later time.
[1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/
[2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/
[3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/
This patch (of 6):
While swapping in a large folio, we need to free swaps related to the
whole folio. To avoid frequently acquiring and releasing swap locks, it
is better to introduce an API for batched free. Furthermore, this new
function, swap_free_nr(), is designed to efficiently handle various
scenarios for releasing a specified number, nr, of swap entries.
Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com
Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com>
Co-developed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we use one swap_address_space for every 64M chunk to reduce lock
contention, this is like having a set of smaller swap files inside one
swap device. But when doing swap cache look up or insert, we are still
using the offset of the whole large swap device. This is OK for
correctness, as the offset (key) is unique.
But Xarray is specially optimized for small indexes, it creates the radix
tree levels lazily to be just enough to fit the largest key stored in one
Xarray. So we are wasting tree nodes unnecessarily.
For 64M chunk it should only take at most 3 levels to contain everything.
But if we are using the offset from the whole swap device, the offset
(key) value will be way beyond 64M, and so will the tree level.
Optimize this by using a new helper swap_cache_index to get a swap entry's
unique offset in its own 64M swap_address_space.
I see a ~1% performance gain in benchmark and actual workload with high
memory pressure.
Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk
with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The
test result is similar but the improvement is smaller if
SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap
cache):
Before:
6.07user 250.74system 4:17.26elapsed 99%CPU (0avgtext+0avgdata 8373376maxresident)k
0inputs+0outputs (55major+33555018minor)pagefaults 0swaps
After (1.8% faster):
6.08user 246.09system 4:12.58elapsed 99%CPU (0avgtext+0avgdata 8373248maxresident)k
0inputs+0outputs (54major+33555027minor)pagefaults 0swaps
Similar result with MySQL and sysbench using swap:
Before:
94055.61 qps
After (0.8% faster):
94834.91 qps
Radix tree slab usage is also very slightly lower.
Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two helpers for retrieving the index within address space for
mixed usage of swap cache and page cache:
- page_index
- folio_index
This commit drops page_index, as we have eliminated all users, and
converts folio_index's helper __page_file_index to use folio to avoid the
page conversion.
Link: https://lkml.kernel.org/r/20240521175854.96038-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
to struct file * and verifying that caller has device
opened exclusively.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ
62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt
KubxHVFsfW+eu6ASeaoMRB83w5OIzwk=
=Liix
-----END PGP SIGNATURE-----
Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
In scan_swap_map_slots(), si->highest_bit can by changed by
swap_range_alloc() concurrently. All reads on si->highest_bit except one
is either protected by lock or read using READ_ONCE. So mark the one racy
read on si->highest_bit as benign using READ_ONCE.
This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.
Link: https://lkml.kernel.org/r/tencent_912BC3E8B0291DA4A0028AB424076375DA07@qq.com
Signed-off-by: linke li <lilinke99@qq.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During reviewing a patch to fix the race condition between
free_swap_and_cache() and swapoff() [1], it was found that the document
about how to prevent racing with swapoff isn't clear enough. Especially
RCU read lock can prevent swapoff from freeing data structures. So, the
document is added as comments.
[1] https://lore.kernel.org/linux-mm/c8fe62d0-78b8-527a-5bef-ee663ccdc37a@huawei.com/
Link: https://lkml.kernel.org/r/20240407065450.498821-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
... eliminating the need to reopen block devices so they could be
exclusively held.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
once upon a time that used to matter; these days we do swap IO for
swap devices at the level that doesn't give a damn about block size,
buffer_head or anything of that sort - just attach the page to
bio, set the location and size (the latter to PAGE_SIZE) and feed
into queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Multi-size THP enables performance improvements by allocating large,
pte-mapped folios for anonymous memory. However I've observed that on an
arm64 system running a parallel workload (e.g. kernel compilation) across
many cores, under high memory pressure, the speed regresses. This is due
to bottlenecking on the increased number of TLBIs added due to all the
extra folio splitting when the large folios are swapped out.
Therefore, solve this regression by adding support for swapping out mTHP
without needing to split the folio, just like is already done for
PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled,
and when the swap backing store is a non-rotating block device. These are
the same constraints as for the existing PMD-sized THP swap-out support.
Note that no attempt is made to swap-in (m)THP here - this is still done
page-by-page, like for PMD-sized THP. But swapping-out mTHP is a
prerequisite for swapping-in mTHP.
The main change here is to improve the swap entry allocator so that it can
allocate any power-of-2 number of contiguous entries between [1, (1 <<
PMD_ORDER)]. This is done by allocating a cluster for each distinct order
and allocating sequentially from it until the cluster is full. This
ensures that we don't need to search the map and we get no fragmentation
due to alignment padding for different orders in the cluster. If there is
no current cluster for a given order, we attempt to allocate a free
cluster from the list. If there are no free clusters, we fail the
allocation and the caller can fall back to splitting the folio and
allocates individual entries (as per existing PMD-sized THP fallback).
The per-order current clusters are maintained per-cpu using the existing
infrastructure. This is done to avoid interleving pages from different
tasks, which would prevent IO being batched. This is already done for the
order-0 allocations so we follow the same pattern.
As is done for order-0 per-cpu clusters, the scanner now can steal order-0
entries from any per-cpu-per-order reserved cluster. This ensures that
when the swap file is getting full, space doesn't get tied up in the
per-cpu reserves.
This change only modifies swap to be able to accept any order mTHP. It
doesn't change the callers to elide doing the actual split. That will be
done in separate changes.
Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are about to allow swap storage of any mTHP size. To prepare for that,
let's change get_swap_pages() to take a folio order parameter instead of
nr_pages. This makes the interface self-documenting; a power-of-2 number
of pages must be provided. We will also need the order internally so this
simplifies accessing it.
Link: https://lkml.kernel.org/r/20240408183946.2991168-5-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
struct percpu_cluster stores the index of cpu's current cluster and the
offset of the next entry that will be allocated for the cpu. These two
pieces of information are redundant because the cluster index is just
(offset / SWAPFILE_CLUSTER). The only reason for explicitly keeping the
cluster index is because the structure used for it also has a flag to
indicate "no cluster". However this data structure also contains a spin
lock, which is never used in this context, as a side effect the code
copies the spinlock_t structure, which is questionable coding practice in
my view.
So let's clean this up and store only the next offset, and use a sentinal
value (SWAP_NEXT_INVALID) to indicate "no cluster". SWAP_NEXT_INVALID is
chosen to be 0, because 0 will never be seen legitimately; The first page
in the swap file is the swap header, which is always marked bad to prevent
it from being allocated as an entry. This also prevents the cluster to
which it belongs being marked free, so it will never appear on the free
list.
This change saves 16 bytes per cpu. And given we are shortly going to
extend this mechanism to be per-cpu-AND-per-order, we will end up saving
16 * 9 = 144 bytes per cpu, which adds up if you have 256 cpus in the
system.
Link: https://lkml.kernel.org/r/20240408183946.2991168-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that we no longer have a convenient flag in the cluster to determine
if a folio is large, free_swap_and_cache() will take a reference and lock
a large folio much more often, which could lead to contention and (e.g.)
failure to split large folios, etc.
Let's solve that problem by batch freeing swap and cache with a new
function, free_swap_and_cache_nr(), to free a contiguous range of swap
entries together. This allows us to first drop a reference to each swap
slot before we try to release the cache folio. This means we only try to
release the folio once, only taking the reference and lock once - much
better than the previous 512 times for the 2M THP case.
Contiguous swap entries are gathered in zap_pte_range() and
madvise_free_pte_range() in a similar way to how present ptes are already
gathered in zap_pte_range().
While we are at it, let's simplify by converting the return type of both
functions to void. The return value was used only by zap_pte_range() to
print a bad pte, and was ignored by everyone else, so the extra reporting
wasn't exactly guaranteed. We will still get the warning with most of the
information from get_swap_device(). With the batch version, we wouldn't
know which pte was bad anyway so could print the wrong one.
[ryan.roberts@arm.com: fix a build warning on parisc]
Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Swap-out mTHP without splitting", v7.
This series adds support for swapping out multi-size THP (mTHP) without
needing to first split the large folio via
split_huge_page_to_list_to_order(). It closely follows the approach
already used to swap-out PMD-sized THP.
There are a couple of reasons for swapping out mTHP without splitting:
- Performance: It is expensive to split a large folio and under
extreme memory pressure some workloads regressed performance when
using 64K mTHP vs 4K small folios because of this extra cost in the
swap-out path. This series not only eliminates the regression but
makes it faster to swap out 64K mTHP vs 4K small folios.
- Memory fragmentation avoidance: If we can avoid splitting a large
folio memory is less likely to become fragmented, making it easier to
re-allocate a large folio in future.
- Performance: Enables a separate series [7] to swap-in whole mTHPs,
which means we won't lose the TLB-efficiency benefits of mTHP once the
memory has been through a swap cycle.
I've done what I thought was the smallest change possible, and as a
result, this approach is only employed when the swap is backed by a
non-rotating block device (just as PMD-sized THP is supported today).
Discussion against the RFC concluded that this is sufficient.
Performance Testing
===================
I've run some swap performance tests on Ampere Altra VM (arm64) with 8
CPUs. The VM is set up with a 35G block ram device as the swap device and
the test is run from inside a memcg limited to 40G memory. I've then run
`usemem` from vm-scalability with 70 processes, each allocating and
writing 1G of memory. I've repeated everything 6 times and taken the mean
performance improvement relative to 4K page baseline:
| alloc size | baseline | + this series |
| | mm-unstable (~v6.9-rc1) | |
|:-----------|------------------------:|------------------------:|
| 4K Page | 0.0% | 1.3% |
| 64K THP | -13.6% | 46.3% |
| 2M THP | 91.4% | 89.6% |
So with this change, the 64K swap performance goes from a 14% regression to a
46% improvement. While 2M shows a small regression I'm confident that this is
just noise.
[1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/
[2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/
[3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/
[4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/
[5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/
[6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/
[7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/
[8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/
[9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/
This patch (of 7):
As preparation for supporting small-sized THP in the swap-out path,
without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE,
which, when present, always implies PMD-sized THP, which is the same as
the cluster size.
The only use of the flag was to determine whether a swap entry refers to a
single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead
of relying on the flag, we now pass in order, which originates from the
folio's order. This allows the logic to work for folios of any order.
The one snag is that one of the swap_page_trans_huge_swapped() call sites
does not have the folio. But it was only being called there to shortcut a
call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets
the folio and (via some other functions) calls
swap_page_trans_huge_swapped(). So I've removed the problematic call site
and believe the new logic should be functionally equivalent.
That said, removing the fast path means that we will take a reference and
trylock a large folio much more often, which we would like to avoid. The
next patch will solve this.
Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster()
which used to be called during folio splitting, since
split_swap_cluster()'s only job was to remove the flag.
Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit d0637c505f ("arm64: enable THP_SWAP for arm64") brings up
THP_SWAP on ARM64, but it doesn't enable THP_SWP on hardware with MTE as
the MTE code works with the assumption tags save/restore is always
handling a folio with only one page.
The limitation should be removed as more and more ARM64 SoCs have this
feature. Co-existence of MTE and THP_SWAP becomes more and more
important.
This patch makes MTE tags saving support large folios, then we don't need
to split large folios into base pages for swapping out on ARM64 SoCs with
MTE any more.
arch_prepare_to_swap() should take folio rather than page as parameter
because we support THP swap-out as a whole. It saves tags for all pages
in a large folio.
As now we are restoring tags based-on folio, in arch_swap_restore(), we
may increase some extra loops and early-exitings while refaulting a large
folio which is still in swapcache in do_swap_page(). In case a large
folio has nr pages, do_swap_page() will only set the PTE of the particular
page which is causing the page fault. Thus do_swap_page() runs nr times,
and each time, arch_swap_restore() will loop nr times for those subpages
in the folio. So right now the algorithmic complexity becomes O(nr^2).
Once we support mapping large folios in do_swap_page(), extra loops and
early-exitings will decrease while not being completely removed as a large
folio might get partially tagged in corner cases such as, 1. a large
folio in swapcache can be partially unmapped, thus, MTE tags for the
unmapped pages will be invalidated; 2. users might use mprotect() to set
MTEs on a part of a large folio.
arch_thp_swp_supported() is dropped since ARM64 MTE was the only one who
needed it.
Link: https://lkml.kernel.org/r/20240322114136.61386-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
There was previously a theoretical window where swapoff() could run and
teardown a swap_info_struct while a call to free_swap_and_cache() was
running in another thread. This could cause, amongst other bad
possibilities, swap_page_trans_huge_swapped() (called by
free_swap_and_cache()) to access the freed memory for swap_map.
This is a theoretical problem and I haven't been able to provoke it from a
test case. But there has been agreement based on code review that this is
possible (see link below).
Fix it by using get_swap_device()/put_swap_device(), which will stall
swapoff(). There was an extra check in _swap_info_get() to confirm that
the swap entry was not free. This isn't present in get_swap_device()
because it doesn't make sense in general due to the race between getting
the reference and swapoff. So I've added an equivalent check directly in
free_swap_and_cache().
Details of how to provoke one possible issue (thanks to David Hildenbrand
for deriving this):
--8<-----
__swap_entry_free() might be the last user and result in
"count == SWAP_HAS_CACHE".
swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0.
So the question is: could someone reclaim the folio and turn
si->inuse_pages==0, before we completed swap_page_trans_huge_swapped().
Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are
still references by swap entries.
Process 1 still references subpage 0 via swap entry.
Process 2 still references subpage 1 via swap entry.
Process 1 quits. Calls free_swap_and_cache().
-> count == SWAP_HAS_CACHE
[then, preempted in the hypervisor etc.]
Process 2 quits. Calls free_swap_and_cache().
-> count == SWAP_HAS_CACHE
Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls
__try_to_reclaim_swap().
__try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()->
put_swap_folio()->free_swap_slot()->swapcache_free_entries()->
swap_entry_free()->swap_range_free()->
...
WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries);
What stops swapoff to succeed after process 2 reclaimed the swap cache
but before process1 finished its call to swap_page_trans_huge_swapped()?
--8<-----
Link: https://lkml.kernel.org/r/20240306140356.3974886-1-ryan.roberts@arm.com
Fixes: 7c00bafee8 ("mm/swap: free swap slots in batch")
Closes: https://lore.kernel.org/linux-mm/65a66eb9-41f8-4790-8db2-0c70ea15979f@redhat.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The code is quite hard to read, we are still writing swap_map after
errors happen. Though the written value is as before,
has_cache = count & SWAP_HAS_CACHE;
count &= ~SWAP_HAS_CACHE;
[snipped]
WRITE_ONCE(p->swap_map[offset], count | has_cache);
It would be better to entirely drop the WRITE_ONCE for both
performance and readability.
[akpm@linux-foundation.org: avoid using goto]
Link: https://lkml.kernel.org/r/20240221091028.123122-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During testing I found there are some times the zswap_writeback_entry()
return -ENOMEM, which is not we expected:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[-12]: 1563
@[0]: 277221
The reason is that __read_swap_cache_async() return NULL because
swapcache_prepare() failed. The reason is that we won't invalidate zswap
entry when swap entry freed to the per-cpu pool, these zswap entries are
still on the zswap tree and lru list.
This patch moves the invalidation ahead to when swap entry freed to the
per-cpu pool, since there is no any benefit to leave trashy zswap entry on
the tree and lru list.
With this patch:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[0]: 259744
Note: large folio can't have zswap entry for now, so don't bother
to add zswap entry invalidation in the large folio swap free path.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-2-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: zswap: simplify zswap_swapoff()", v2.
These patches aim to simplify zswap_swapoff() by removing the unnecessary
trees cleanup code. Patch 1 makes sure that the order of operations
during swapoff is enforced correctly, making sure the simplification in
patch 2 is correct in a future-proof manner.
This patch (of 2):
In swap_range_free(), we update inuse_pages then do some cleanups (arch
invalidation, zswap invalidation, swap cache cleanups, etc). During
swapoff, try_to_unuse() checks that inuse_pages is 0 to make sure all swap
entries are freed. Make sure we only update inuse_pages after we are done
with the cleanups in swap_range_free(), and use the proper memory barriers
to enforce it. This makes sure that code following try_to_unuse() can
safely assume that swap_range_free() ran for all entries in thr swapfile
(e.g. swap cache cleanup, zswap_swapoff()).
In practice, this currently isn't a problem because swap_range_free() is
called with the swap info lock held, and the swapoff code happens to spin
for that after try_to_unuse(). However, this seems fragile and
unintentional, so make it more relable and future-proof. This also
facilitates a following simplification of zswap_swapoff().
Link: https://lkml.kernel.org/r/20240124045113.415378-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20240124045113.415378-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each swapfile has one rb-tree to search the mapping of swp_entry_t to
zswap_entry, that use a spinlock to protect, which can cause heavy lock
contention if multiple tasks zswap_store/load concurrently.
Optimize the scalability problem by splitting the zswap rb-tree into
multiple rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M),
just like we did in the swap cache address_space splitting.
Although this method can't solve the spinlock contention completely, it
can mitigate much of that contention. Below is the results of kernel
build in tmpfs with zswap shrinker enabled:
linux-next zswap-lock-optimize
real 1m9.181s 1m3.820s
user 17m44.036s 17m40.100s
sys 7m37.297s 4m54.622s
So there are clearly improvements.
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-2-b5cc55479090@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chriscli@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: optimize the scalability of zswap rb-tree", v2.
When testing the zswap performance by using kernel build -j32 in a tmpfs
directory, I found the scalability of zswap rb-tree is not good, which is
protected by the only spinlock. That would cause heavy lock contention if
multiple tasks zswap_store/load concurrently.
So a simple solution is to split the only one zswap rb-tree into multiple
rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M). This idea
is from the commit 4b3ef9daa4 ("mm/swap: split swap cache into 64MB
trunks").
Although this method can't solve the spinlock contention completely, it
can mitigate much of that contention. Below is the results of kernel
build in tmpfs with zswap shrinker enabled:
linux-next zswap-lock-optimize
real 1m9.181s 1m3.820s
user 17m44.036s 17m40.100s
sys 7m37.297s 4m54.622s
So there are clearly improvements. And it's complementary with the
ongoing zswap xarray conversion by Chris. Anyway, I think we can also
merge this first, it's complementary IMHO. So I just refresh and resend
this for further discussion.
This patch (of 2):
Not all zswap interfaces can handle the absence of the zswap rb-tree,
actually only zswap_store() has handled it for now.
To make things simple, we make sure each swapfile always have the zswap
rb-tree prepared before being enabled and used. The preparation is
unlikely to fail in practice, this patch just make it explicit.
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-0-b5cc55479090@bytedance.com
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-1-b5cc55479090@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chriscli@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem. Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1
---- ----
do_swap_page() do_swap_page() with same entry
<direct swapin path> <direct swapin path>
<alloc page A> <alloc page B>
swap_read_folio() <- read to page A swap_read_folio() <- read to page B
<slow on later locks or interrupt> <finished swapin first>
... set_pte_at()
swap_free() <- entry is free
<write to page B, now page A stalled>
<swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
unchanged, but page A
is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache. Release the pin after
PT unlocked.
Racers just loop and wait since it's a rare and very short event. A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics. A similar livelock issue was described in commit
029c4628b2 ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
Polulating 32MB of memory region...
Keep swapping out...
Starting round 0...
Spawning 65536 workers...
32746 workers spawned, wait for done...
Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region
using a small swap device. Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:
Before: 10934698 us
After: 11157121 us
Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4]
Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com
Fixes: 0bcac06f27 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The goal is to get sched.h down to a type only header, so the main thing
happening in this patchset is splitting out various _types.h headers and
dependency fixups, as well as moving some things out of sched.h to
better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies.
Testing - it's been in -next, and fixes from pretty much all
architectures have percolated in - nothing major.
-----BEGIN PGP SIGNATURE-----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=3tyT
-----END PGP SIGNATURE-----
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
The page in question is either freshly allocated or known to be in
the swap cache; these assertions are not particularly useful.
Link: https://lkml.kernel.org/r/20231212164813.2540119-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Finish two folio conversions".
Most callers of page_add_new_anon_rmap() and
lru_cache_add_inactive_or_unevictable() have been converted to their folio
equivalents, but there are still a few stragglers. There's a bit of
preparatory work in ksm and unuse_pte(), but after that it's pretty
mechanical.
This patch (of 9):
Accept a folio as an argument and return a folio result. Removes a call
to compound_head() in do_swap_page(), and prevents folio & page from
getting out of sync in unuse_pte().
Reviewed-by: David Hildenbrand <david@redhat.com>
[willy@infradead.org: fix smatch warning]
Link: https://lkml.kernel.org/r/ZXnPtblC6A1IkyAB@casper.infradead.org
[david@redhat.com: only adjust the page if the folio changed]
Link: https://lkml.kernel.org/r/6a8f2110-fa91-4c10-9eae-88315309a6e3@redhat.com
Link: https://lkml.kernel.org/r/20231211162214.2146080-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231211162214.2146080-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap_atomic() has been deprecated in favor of kmap_local_page().
Therefore, replace kmap_atomic() with kmap_local_page() in swapfile.c.
kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only in !PREEMPT_RT kernels). The
kernel virtual addresses returned by these two API are only valid in the
context of the callers (i.e., they cannot be handed to other threads).
With kmap_local_page() the mappings are per thread and CPU local like in
kmap_atomic(); however, they can handle page-faults and can be called from
any context (including interrupts). The tasks that call kmap_local_page()
can be preempted and, when they are scheduled to run again, the kernel
virtual addresses are restored and are still valid.
In mm/swapfile.c, the blocks of code between the mappings and un-mappings
do not depend on the above-mentioned side effects of kmap_atomic(), so
that the mere replacements of the old API with the new one is all that is
required (i.e., there is no need to explicitly call pagefault_disable()
and/or preempt_disable()).
Link: https://lkml.kernel.org/r/20231127155452.586387-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert swapping code to use bdev_open_by_dev() and pass the handle
around.
CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Let's simply work on the folio directly and remove the helpers.
Link: https://lkml.kernel.org/r/20230821160849.531668-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP
+ cleanups".
This series stops using page->private on tail pages for THP_SWAP, replaces
folio->private by folio->swap for swapcache folios, and starts using
"new_folio" for tail pages that we are splitting to remove the usage of
page->private for swapcache handling completely.
This patch (of 4):
Let's stop using page->private on tail pages, making it possible to just
unconditionally reuse that field in the tail pages of large folios.
The remaining usage of the private field for THP_SWAP is in the THP
splitting code (mm/huge_memory.c), that we'll handle separately later.
Update the THP_SWAP documentation and sanity checks in mm_types.h and
__split_huge_page_tail().
[david@redhat.com: stop using page->private on tail pages for THP_SWAP]
Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use helper macro K() to improve code readability. No functional
modification involved.
Link: https://lkml.kernel.org/r/20230804012559.2617515-3-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The only user of frontswap is zswap, and has been for a long time. Have
swap call into zswap directly and remove the indirection.
[hannes@cmpxchg.org: remove obsolete comment, per Yosry]
Link: https://lkml.kernel.org/r/20230719142832.GA932528@cmpxchg.org
[fengwei.yin@intel.com: don't warn if none swapcache folio is passed to zswap_load]
Link: https://lkml.kernel.org/r/20230810095652.3905184-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230717160227.GA867137@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We would like to move away from requiring architectures to restore
metadata from swap in the set_pte_at() implementation, as this is not only
error-prone but adds complexity to the arch-specific code. This requires
us to call arch_swap_restore() before calling swap_free() whenever pages
are restored from swap. We are currently doing so everywhere except in
unuse_pte(); do so there as well.
Link: https://lkml.kernel.org/r/20230523004312.1807357-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/I68276653e612d64cde271ce1b5a99ae05d6bbc4f
Signed-off-by: Peter Collingbourne <pcc@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Our test finds a WARN_ON in add_to_avail_list. During add_to_avail_list,
avail_lists is already in swap_avail_heads, while leads to this WARN_ON.
Here is the simplified calltrace:
------------[ cut here ]------------
Call trace:
add_to_avail_list+0xb8/0xc0
swap_range_free+0x110/0x138
swapcache_free_entries+0x100/0x1c0
free_swap_slot+0xbc/0xe0
put_swap_folio+0x1f0/0x2ec
delete_from_swap_cache+0x6c/0xd0
folio_free_swap+0xa4/0xe4
__try_to_reclaim_swap+0x9c/0x190
free_swap_and_cache+0x84/0x88
unmap_page_range+0x31c/0x934
unmap_single_vma.isra.0+0x48/0x84
unmap_vmas+0x98/0x10c
exit_mmap+0xa4/0x210
mmput+0x88/0x158
do_exit+0x284/0x970
do_group_exit+0x34/0x90
post_copy_siginfo_from_user32+0x0/0x1cc
do_notify_resume+0x15c/0x470
el0_svc+0x74/0x84
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x190/0x194
During swapoff, try_to_unuse fails to alloc memory due to memory limit and
this leads to the failure of swapoff and causes re-insertion of swap space
back into swap_list. During _enable_swap_info, this swap device is added
to avail list even this swap device if full. At the same time, one entry
in this full swap device in released and we try to add this device into
avail list and find it is already in the avail list. This causes this
WARN_ON.
To fix this. Don't add to avail list is swap is full.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230627120833.2230766-3-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "A few fixup patches for mm", v2.
This series contains a few fixup patches to fix potential unexpected
return value, fix wrong swap entry type for hwpoisoned swapcache page and
so on. More details can be found in the respective changelogs.
This patch (of 3):
Hwpoisoned dirty swap cache page is kept in the swap cache and there's
simple interception code in do_swap_page() to catch it. But when trying
to swapoff, unuse_pte() will wrongly install a general sense of "future
accesses are invalid" swap entry for hwpoisoned swap cache page due to
unaware of such type of page. The user will receive SIGBUS signal without
expected BUS_MCEERR_AR payload. BTW, typo 'hwposioned' is fixed.
Link: https://lkml.kernel.org/r/20230727115643.639741-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20230727115643.639741-2-linmiaohe@huawei.com
Fixes: 6b970599e8 ("mm: hwpoison: support recovery from ksm_might_need_to_copy()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
Delete a triply out-of-date comment from add_swap_count_continuation():
1. vmalloc_to_page() changed from pte_offset_map() to pte_offset_kernel()
2. pte_offset_map() changed from using kmap_atomic() to kmap_local_page()
3. kmap_atomic() changed from using fixed FIX_KMAP addresses in 2.6.37.
Link: https://lkml.kernel.org/r/9022632b-ba9d-8cb0-c25-4be9786481b5@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock()
and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad()
from unuse_pmd_range() now that pte_offset_map() does all that itself.
Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The general rule to use a swap entry is as follows.
When we get a swap entry, if there aren't some other ways to prevent
swapoff, such as the folio in swap cache is locked, page table lock is
held, etc., the swap entry may become invalid because of swapoff.
Then, we need to enclose all swap related functions with
get_swap_device() and put_swap_device(), unless the swap functions
call get/put_swap_device() by themselves.
Add the rule as comments of get_swap_device().
Link: https://lkml.kernel.org/r/20230529061355.125791-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chris Li (Google) <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baoquan He