Core & protocols
----------------
- Improve drop account scalability on NUMA hosts for RAW and UDP sockets
and the backlog, almost doubling the Pps capacity under DoS.
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance by
an additional 50%, even more under extreme conditions.
- Add support for PSP encryption of TCP connections; this mechanism has
some similarities with IPsec and TLS, but offers superior HW offloads
capabilities.
- Ongoing work to support Accurate ECN for TCP. AccECN allows more than
one congestion notification signal per RTT and is a building block for
Low Latency, Low Loss, and Scalable Throughput (L4S).
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath.
- Refactor skb deferral free to better scale on large multi-NUMA hosts,
this improves TCP and UDP RX performances significantly on such HW.
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds.
- Improve handling of setups with a large number of nexthop, making dump
operating scaling linearly and avoiding unneeded synchronize_rcu() on
delete.
- Improve bridge handling of VLAN FDB, storing a single entry per bridge
instead of one entry per port; this makes the dump order of magnitude
faster on large switches.
- Restore IP ID correctly for encapsulated packets at GSO segmentation
time, allowing GRO to merge packets in more scenarios.
- Improve netfilter matching performance on large sets.
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting recent
TCP autotuning changes.
- Allow bridges to redirect to a backup port when the bridge port is
administratively down.
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups.
- Add RCU safety to dst->dev, closing a lot of possible races.
- A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing
code duplication.
- Supports pulling data from an skb frag into the linear area of an XDP
buffer.
Things we sprinkled into general kernel code
--------------------------------------------
- Generate netlink documentation from YAML using an integrated
YAML parser.
Driver API
----------
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection.
- Introduce API for fetching the DMA device for a given queue, allowing
TCP zerocopy RX on more H/W setups.
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath.
- Add a new dedicated ethtool callback enabling drivers to provide the
number of RX rings directly, improving efficiency and clarity in RX
ring queries and RSS configuration.
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause.
- Support for DPLL phase offset exponential moving average, controlling
the average smoothing factor.
Device drivers
--------------
- Add a new Huawei driver for 3rd gen NIC (hinic3).
- Add a new SpacemiT driver for K1 ethernet MAC.
- Add a generic abstraction for shared memory communication devices
(dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages to
improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4): support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k_
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmjdBdsSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkWnAP/2Jz0ExnYMDxLxkkKqMte+3JNeF/KNjB
zVIslYN/5ekkd1TMXyDLFlWHqUOUMSF9+cK5ZRMHG6/lzOueSzFuuuDFsWs6Kf2f
q7Q9MzlXhR9++YCsdES1uS5x3PPjMInzo2ZivMFa6fUDLLFSzeAOKL9k+RS0EggU
VlXv2Wkm73R0O6KAssgDsHke9cnNz+F0DzhQ0S3qkyZF9tS5NrDeUl7fZ47XZgwb
ZuXdEzKmTTepo2XvZGxJoF2D7nekWFlHhLjEPpDJtET19nwhukCry41/FplJwlKR
dWsYkqLkrOEQKFQ+q++/5c3BgFOG+IrQLbP5bGQF1tZRMl4Dqp9PDxK5fKJfccbS
0VY3Y2qWOSYejT2Ji2kEHR5E5rPyFm3Y5A4Rnpz0yEHj14vL2v4zf7CZRkCyyDfD
doIZXFGkM0+N7QeXLEN833cje9zjaXuP9GAE+2bb+wAWAZAqof4KX8JgHh+y5Rwm
pvUtvFxmEtntlMwNBap8aT3FquGtfZncU8pzAE5kvWjuMvyF0NVWiE5rB2kSQM/X
NLmUdvDyjwwJqthXAJG0fl+a0mNJ/kOAqSOKJDJrfKDGWa+ovwY0iY06SpK0wIbO
Wz7tpMk5MSlYXW8xWMlbyhvvU6T9xuoQ2KV4QTdMxc6Ir3sNX6YkQr+gjQjxB0gx
ST2QF6lZeWFh
=w2Kz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
-----BEGIN PGP SIGNATURE-----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=LeQi
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Instead of sharing sd->defer_list & sd->defer_count with
many cpus, add one pair for each NUMA node.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Get rid of sd->defer_lock and adopt llist operations.
We optimize skb_attempt_defer_free() for the common case,
where the packet is queued. Otherwise sd->defer_count
is increasing, until skb_defer_free_flush() clears it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is preparation work to remove the softnet_data.defer_lock,
as it is contended on hosts with large number of cores.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide a PSP implementation for netdevsim.
Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation
and decapsulation on skbs, but perform no encryption or decryption. In
order to make encryption with a bad key result in a drop on the peer's
rx side, we stash our psd's generation number in the first byte of each
key before handing to the peer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Corrected "rtnl_unregster()" -> "rtnl_unregister()" in the
documentation comment of "rtnl_unregister_all()"
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250929085418.49200-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQgQAKCRCRxhvAZXjc
oiFXAQCpbLvkWbld9wLgxUBhq+q+kw5NvGxzpvqIhXwJB9F9YAEA44/Wevln4xGx
+kRUbP+xlRQqenIYs2dLzVHzAwAdfQ4=
=EO4Y
-----END PGP SIGNATURE-----
Merge tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc
ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl
8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY=
=tUXG
-----END PGP SIGNATURE-----
Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
Similar to other BPF UAPI struct, force emit BTF of struct bpf_xdp_sock
so that it is defined in vmlinux.h.
In a later patch, a selftest will use vmlinux.h to get the definition of
struct bpf_xdp_sock instead of bpf.h.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925170013.1752561-1-ameryhung@gmail.com
Currently, NETIF_F_TSO_MANGLEID indicates that the inner-most ID can
be mangled. Outer IDs can always be mangled.
Make GSO preserve outer IDs by default, with NETIF_F_TSO_MANGLEID allowing
both inner and outer IDs to be mangled.
This commit also modifies a few drivers that use SKB_GSO_FIXEDID directly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-4-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's misplaced in struct proc_ns_operations and ns->ops might be NULL if
the namespace is compiled out but we still want to know the type of the
namespace for the initial namespace struct.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaNNwBQAKCRAraS+Z+3y5
E8heAQDdJTR9rwAL7gD79cldlHP5PTmjyidLIoFG/efaGSbN1AD9EdvrykDU4xOG
aGaO8TooGUZf7vAL8tIFuMeydYvi/gM=
=Qu4T
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The listener -> child locking no longer exists in the fast path
since commit e994b2f0fb ("tcp: do not lock listener to process
SYN packets").
Let's remove the stale comment for reqsk_fastopen_remove().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250923005441.4131554-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add kfunc, bpf_xdp_pull_data(), to support pulling data from xdp
fragments. Similar to bpf_skb_pull_data(), bpf_xdp_pull_data() makes
the first len bytes of data directly readable and writable in bpf
programs. If the "len" argument is larger than the linear data size,
data in fragments will be copied to the linear data area when there
is enough room. Specifically, the kfunc will try to use the tailroom
first. When the tailroom is not enough, metadata and data will be
shifted down to make room for pulling data.
A use case of the kfunc is to decapsulate headers residing in xdp
fragments. It is possible for a NIC driver to place headers in xdp
fragments. To keep using direct packet access for parsing and
decapsulating headers, users can pull headers into the linear data
area by calling bpf_xdp_pull_data() and then pop the header with
bpf_xdp_adjust_head().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-4-ameryhung@gmail.com
Move skb_frag_t adjustment into bpf_xdp_shrink_data() and extend its
functionality to be able to shrink an xdp fragment from both head and
tail. In a later patch, bpf_xdp_pull_data() will reuse it to shrink an
xdp fragment from head.
Additionally, in bpf_xdp_frags_shrink_tail(), breaking the loop when
bpf_xdp_shrink_data() returns false (i.e., not releasing the current
fragment) is not necessary as the loop condition, offset > 0, has the
same effect. Remove the else branch to simplify the code.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-3-ameryhung@gmail.com
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
sk->sk_sndbuf is read-mostly in tx path, so move it from
sock_write_tx group to more appropriate sock_read_tx.
sk->sk_err_soft was not identified previously, but
is used from tcp_ack().
Move it to sock_write_tx group for better cache locality.
Also change tcp_ack() to clear sk->sk_err_soft only if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_uid and sk_protocol are read from inet6_csk_route_socket()
for each TCP transmit.
Also read from udpv6_sendmsg(), udp_sendmsg() and others.
Move them to sock_read_tx for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-3-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simply derive the ns operations from the namespace type.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace synchronize_rcu() with synchronize_net() in __netpoll_free().
synchronize_net() is RTNL-aware and will use the more efficient
synchronize_rcu_expedited() when called under RTNL lock, avoiding
the potentially expensive synchronize_rcu() in RTNL critical sections.
Since __netpoll_free() is called with RTNL held (as indicated by
ASSERT_RTNL()), this change improves performance by reducing the
time spent in the RTNL critical section.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250918-netpoll_jv-v1-2-67d50eeb2c26@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netpoll_info structure contains an useless pointer back to its
associated netpoll. This field is never used, and the assignment in
__netpoll_setup() is does not comtemplate multiple instances, as
reported by Jay[1].
Drop both the member and its initialization to simplify the structure.
Link: https://lore.kernel.org/all/2930648.1757463506@famine/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250918-netpoll_jv-v1-1-67d50eeb2c26@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various network interface types make use of needed_{head,tail}room values
to efficiently reserve buffer space for additional encapsulation headers,
such as VXLAN, Geneve, IPSec, etc. However, it is not currently possible
to query these values in a generic way.
Introduce ability to query the needed_{head,tail}room values of a network
device via rtnetlink, such that applications that may wish to use these
values can do so.
For example, Cilium agent iterates over present devices based on user config
(direct routing, vxlan, geneve, wireguard etc.) and in future will configure
netkit in order to expose the needed_{head,tail}room into K8s pods. See
b9ed315d3c ("netkit: Allow for configuring needed_{head,tail}room").
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alasdair McWilliam <alasdair@mcwilliam.dev>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250917095543.14039-1-alasdair@mcwilliam.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't directly acess the namespace count. There's even a dedicated
helper for this.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Don't directly acess the namespace count. There's even a dedicated
helper for this.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
And drop ns_free_inum(). Anything common that can be wasted centrally
should be wasted in the new common helper.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There's a lot of information that namespace implementers don't need to
know about at all. Encapsulate this all in the initialization helper.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Every namespace type has a container_of(ns, <ns_type>, ns) static inline
function that is currently not exposed in the header. So we have a bunch
of places that open-code it via container_of(). Move it to the headers
so we can use it directly.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Support the generic ns lookup infrastructure to support file handles for
namespaces.
The network namespace has a separate list with different lifetime rules
which we can just leave in tact. We have a similar concept for mount
namespaces as well where it is on two differenet lists for different
purposes.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a callback to validate skb's originating from tcp timewait
socks before passing to the device layer. Full socks have a
sk_validate_xmit_skb member for checking that a device is capable of
performing offloads required for transmitting an skb. With psp, tcp
timewait socks will inherit the crypto state from their corresponding
full socks. Any ACKs or RSTs that originate from a tcp timewait sock
carrying psp state should be psp encapsulated.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-8-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move definition of sk_validate_xmit_skb() from net/core/sock.c to
net/core/dev.c.
This change is in preparation of the next patch, where
sk_validate_xmit_skb() will need to cast sk to a tcp_timewait_sock *,
and access member fields. Including linux/tcp.h from linux/sock.h
creates a circular dependency, and dev.c is the only current call site
of this function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-7-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add validation points and state propagation to support PSP key
exchange inline, on TCP connections. The expectation is that
application will use some well established mechanism like TLS
handshake to establish a secure channel over the connection and
if both endpoints are PSP-capable - exchange and install PSP keys.
Because the connection can existing in PSP-unsecured and PSP-secured
state we need to make sure that there are no race conditions or
retransmission leaks.
On Tx - mark packets with the skb->decrypted bit when PSP key
is at the enqueue time. Drivers should only encrypt packets with
this bit set. This prevents retransmissions getting encrypted when
original transmission was not. Similarly to TLS, we'll use
sk->sk_validate_xmit_skb to make sure PSP skbs can't "escape"
via a PSP-unaware device without being encrypted.
On Rx - validation is done under socket lock. This moves the validation
point later than xfrm, for example. Please see the documentation patch
for more details on the flow of securing a connection, but for
the purpose of this patch what's important is that we want to
enforce the invariant that once connection is secured any skb
in the receive queue has been encrypted with PSP.
Add GRO and coalescing checks to prevent PSP authenticated data from
being combined with cleartext data, or data with non-matching PSP
state. On Rx, check skb's with psp_skb_coalesce_diff() at points
before psp_sk_rx_policy_check(). After skb's are policy checked and on
the socket receive queue, skb_cmp_decrypted() is sufficient for
checking for coalescable PSP state. On Tx, tcp_write_collapse_fence()
should be called when transitioning a socket into PSP Tx state to
prevent data sent as cleartext from being coalesced with PSP
encapsulated data.
This change only adds the validation points, for ease of review.
Subsequent change will add the ability to install keys, and flesh
the enforcement logic out
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-5-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add pointers to psp data structures to core networking structs,
and an SKB extension to carry the PSP information from the drivers
to the socket layer.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-4-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Generic sk_drops_inc() reads sk->sk_drop_counters.
We know the precise location for UDP sockets.
Move sk_drop_counters out of sock_read_rxtx
so that sock_write_rxtx starts at a cache line boundary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250916160951.541279-9-edumazet@google.com
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250912161703.361272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds