Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
Correct and add to adis.h to resolve all kernel-doc warnings:
- add a missing struct member description
- change one non-kernel-doc comment to use /* instead of /**
- correct function parameter @value to @val (7 locations)
- add function return value comments (13 locations)
Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo'
not described in 'adis_data'
Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc
format: * The state_lock is meant to be used during operations that
require
Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"'
not described in 'adis'
Warning: include/linux/iio/imu/adis.h:264 function parameter 'val'
not described in 'adis_write_reg'
Warning: include/linux/iio/imu/adis.h:371 No description found for
return value of 'adis_update_bits_base'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix multiple warnings in enum vadc_scale_fn_type by adding a leading
'@' to the kernel-doc descriptions.
Fixed 14 warnings in this one enum, such as:
Warning: include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_DEFAULT' not described in enum 'vadc_scale_fn_type'
Warning: ../include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_THERM_100K_PULLUP' not described in enum 'vadc_scale_fn_type'
Warning: ../include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_PMIC_THERM' not described in enum 'vadc_scale_fn_type'
Also prevent the warning on SCALE_HW_CALIB_INVALID by marking it
"private:" so that kernel-doc notation is not needed for it.
This leaves only one warning here, which I don't know the
appropriate description of:
qcom-vadc-common.h:125: warning: Enum value
'SCALE_HW_CALIB_PMIC_THERM_PM7' not described in enum 'vadc_scale_fn_type'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement the .get_dma_dev() callback for DMA buffers by returning the
device that owns the DMA channel. This allows the core DMABUF
infrastructure to properly map DMA buffers using the correct device,
avoiding the need for bounce buffers on systems where memory is mapped
above the 32-bit range.
The function returns the DMA queue's device, which is the actual device
responsible for DMA operations in buffer-dma implementations.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new buffer accessor .get_dma_dev() in order to get the
struct device responsible for actually providing the dma channel. We
cannot assume that we can use the parent of the IIO device for mapping
the DMA buffer. This becomes important on systems (like the Xilinx/AMD
zynqMP Ultrascale) where memory (or part of it) is mapped above the
32 bit range. On such systems and given that a device by default has
a dma mask of 32 bits we would then need to rely on bounce buffers (to
swiotlb) for mapping memory above the dma mask limit.
In the process, add an iio_buffer_get_dma_dev() helper function to get
the proper DMA device.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document that the callback registered with iio_channel_get_all_cb()
must be safe to call from any context since it is called from by
iio_push_to_buffer() which can be called in any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document that the struct iio_buffer_access_funcs.store_to() callback
must be safe to call from any context since it is called from
iio_push_to_buffer() which may be called from any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the documentation of iio_push_to_buffers_with_timestamp() with
a deprecation notice pointing to the preferred alternative.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the iio_push_to_buffers_with_ts() function.
This is copied and slightly cleaned up from
iio_push_to_buffers_with_timestamp().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
-----BEGIN PGP SIGNATURE-----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=iOJF
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.18
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
* tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
MAINTAINERS: Support ROHM BD79112 ADC
iio: adc: Support ROHM BD79112 ADC/GPIO
dt-bindings: iio: adc: ROHM BD79112 ADC/GPIO
iio: pressure: bmp280: Use gpiod_set_value_cansleep()
iio: pressure: bmp280: Remove noisy dev_info()
iio: ABI: add filter types for ad7173
iio: adc: ad7173: support changing filter type
iio: adc: ad7173: rename odr field
iio: adc: ad7173: rename ad7173_chan_spec_ext_info
iio: adc: Add driver for Marvell 88PM886 PMIC ADC
dt-bindings: mfd: 88pm886: Add #io-channel-cells
iio: ABI: document "sinc4+rej60" filter_type
iio: adc: ad7124: add filter support
iio: adc: ad7124: support fractional sampling_frequency
iio: adc: ad7124: use guard(mutex) to simplify return paths
iio: adc: ad7124: use read_avail() for scale_available
iio: adc: ad7124: use clamp()
iio: adc: ad7124: fix sample rate for multi-channel use
Documentation: ABI: iio: add sinc4+lp
docs: iio: add documentation for ade9000 driver
...
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
Additionally adds:
- IIO_CHAN_INFO_POWERFACTOR: Power factor channel info type for
representing the ratio of active power to apparent power
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The channel-scale handling in iio_convert_raw_to_processed() in essence
does the following:
processed = raw * caller-provided-scale * channel-scale
Which can also be written as:
multiplier = raw * caller-provided-scale
iio-value = channel-scale
processed = multiplier * iio-value
Where iio-value is a set of IIO_VAL_* type + val + val2 integers, being
able to handle multiplication of iio-values like this is something
which is useful to have in general and, as previous bugfixes to
iio_convert_raw_to_processed() have shown, also tricky to implement.
Split the iio-value multiplication code from iio_convert_raw_to_processed()
out into a new iio_multiply_value() helper. This serves multiple purposes:
1. Having this split out allows writing a KUnit test for this.
2. Having this split out allows re-use to get better precision
when scaling values in iio_read_channel_processed_scale().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-4-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The clk div bits (2 bits wide) do not start in bit 16 but in bit 15. Fix it
accordingly.
Fixes: e31166f0fd ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-2-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
for_each_set_bit()/find_*_bit() expect arrays of unsigned long (see
include/linux/find.h), but industrialio-core passed const long * into
iio_device_add_info_mask_type{,_avail}().
These masks are used purely as bit arrays and are populated via BIT()
(1UL << n). Switch the info_mask_* fields and the corresponding function
parameters to unsigned long so the types match the helpers. This removes
sparse warnings about signedness mismatches (seen with 'make C=1'
CF='-Wsparse-all') without changing behavior or struct layout.
No functional change intended.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250820004755.69627-1-junjie.cao@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPI offload support to the ad_sigma_delta module.
When the SPI controller has SPI offload capabilities, the module will
now use that for buffered reads instead of the RDY interrupt trigger.
Drivers that use the ad_sigma_delta module will have to opt into this
by setting supports_spi_offload since each driver will likely need
additional changes before SPI offload can be used. This will allow us
to gradually enable SPI offload support for each driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-11-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use spi_optimize_message() to improve the performance of buffered reads.
By setting up the SPI message and pre-optimizing it in the buffer
postenable callback, we can reduce overhead during each sample read.
A rough estimate shows that this reduced the CPU usage of the interrupt
handler thread from 22% to 16% using an EVAL-AD4112ARDZ board on a
DE10-Nano (measuring a single channel at the default 6.2 kHz sample
rate).
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-8-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace uint8_t with u8 in the ad_sigma_delta driver.
Technically, uint8_t comes from the C standard library, while u8 is a
Linux kernel type. Since we don't use the C standard library in the
kernel, we should use the kernel types instead.
There is also one instance where int64_t is replaced with s64.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-3-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add chan parameter to iio_backend_oversampling_ratio_set() to allow
for contexts where the channel must be specified. Modify all
existing users.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-3-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ChromeOS EC can report activity information derived from the
accelerometer:
- Reports on-body/off-body as a proximity event.
- Reports significant motion as an activity event.
This new sensor is a virtual sensor, included only when the EC firmware
is compiled with the appropriate module.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20250604053903.1376465-1-gwendal@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADCs as ad7606 implement a phase calibration as a delay. Add such
definition, needed for ad7606.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-2-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio backend support for number of lanes to be enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-4-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for staring the capture synchronization.
When activated, it initates a proccess that aligns the sample's most
significant bit (MSB) based solely on the captured data, without
considering any other external signals.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for digital filter type selection.
This setting can be adjusted within the IP cores interfacing devices.
The IP core can be configured based on the state of the actual
digital filter configuration of the part.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new macros to help with the common case of declaring a buffer that
is safe to use with iio_push_to_buffers_with_ts(). This is not trivial
to do correctly because of the alignment requirements of the timestamp.
This will make it easier for both authors and reviewers.
To avoid double __align() attributes in cases where we also need DMA
alignment, add a 2nd variant IIO_DECLARE_DMA_BUFFER_WITH_TS().
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-2-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a condition to ensure that IIO_DMA_MINALIGN is at least 8 bytes.
On some 32-bit architectures, IIO_DMA_MINALIGN is 4. In many cases,
drivers are using this alignment for buffers that include a 64-bit
timestamp that is used with iio_push_to_buffers_with_ts(), which expects
the timestamp to be aligned to 8 bytes. To handle this, we can just make
IIO_DMA_MINALIGN at least 8 bytes.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-1-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check that data_total_len argument against iio_dev->scan_bytes.
The size needs to be at least as big as the scan. It can be larger,
which is typical if only part of fixed sized storage is used due to
a subset of channels being enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for getting the data source used.
The ad3552r HDL implements an internal ramp generator, so adding the
getter to allow data source get/set by debugfs.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250409-wip-bl-ad3552r-fixes-v5-3-fb429c3a6515@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Now there are no remaining callers of iio_device_claim_direct_mode()
and iio_device_release_direct_mode() rename those functions to ensure
they are not used in new drivers. Also make them now return booleans
in line with the sparse friendly static inline wrappers.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-38-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for STM32MP25 SoC. Use newly introduced compatible to handle
this new HW variant. Add new trigger definitions that can be used by the
stm32 analog-to-digital converter. Use compatible data to identify them.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250314171451.3497789-4-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are ADC ICs which may have some of the AIN pins usable for other
functions. These ICs may have some of the AIN pins wired so that they
should not be used for ADC.
A common way of marking pins that can be used as ADC inputs is to add
corresponding channel@N nodes in the device tree as described in the ADC
binding yaml.
Add couple of helper functions which can be used to retrieve the channel
information from the device node.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/f1d8b3e15237947738912c0d297b3e1e21d8b03e.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some devices may have more than 16 bits of status. This patch allows the
user to specify the size of the DIAG_STAT register. It defaults to 2 if
not specified. This is mainly for backward compatibility.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-4-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch allows the custom definition of reset functionality for adis object.
It is useful in cases where the driver does not need to sleep after the reset
since it is handled by the library.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-3-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch introduces a custom ops struct letting users define custom read and
write functions. Some adis devices might define a completely different spi
protocol from the one used in the default implementation.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-2-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Scoped conditional automated cleanup turned out to be harder to work
with than expected. Despite several attempts to find a better solution
non have surfaced. As such rip it out of the IIO code.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250209180624.701140-28-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Initial thought was to do something similar to __cond_lock()
do_iio_device_claim_direct_mode(iio_dev) ? : ({ __acquire(iio_dev); 0; })
+ Appropriate static inline iio_device_release_direct_mode()
However with that, sparse generates false positives. E.g.
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c:1811:17: warning: context imbalance in 'st_lsm6dsx_read_raw' - unexpected unlock
So instead, this patch rethinks the return type and makes it more
'conditional lock like' (which is part of what is going on under the hood
anyway) and return a boolean - true for successfully acquired, false for
did not acquire.
To allow a migration path given the rework is now non trivial, take a leaf
out of the naming of the conditional guard we currently have for IIO
device direct mode and drop the _mode postfix from the new functions giving
iio_device_claim_direct() and iio_device_release_direct()
Whilst the kernel supports __cond_acquires() upstream sparse does not
yet do so. Hence rely on sparse expanding a static inline wrapper
to explicitly see whether __acquire() is called.
Note that even with the solution here, sparse sometimes gives false
positives. However in the few cases seen they were complex code
structures that benefited from simplification anyway.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250209180624.701140-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for setting the data size used.
This setting can be adjusted within the IP cores interfacing devices.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250214131955.31973-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add backend support for obtaining the interface type used.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250214131955.31973-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new devm_iio_dmaengine_buffer_setup_with_handle() function to
handle cases where the DMA channel is managed by the caller rather than
being requested and released by the iio_dmaengine module.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-9-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the IIO dmaengine buffer code to split requesting the DMA
channel from allocating the buffer. We want to be able to add a new
function where the IIO device driver manages the DMA channel, so these
two actions need to be separate.
To do this, calling dma_request_chan() is moved from
iio_dmaengine_buffer_alloc() to iio_dmaengine_buffer_setup_ext(). A new
__iio_dmaengine_buffer_setup_ext() helper function is added to simplify
error unwinding and will also be used by a new function in a later
patch.
iio_dmaengine_buffer_free() now only frees the buffer and does not
release the DMA channel. A new iio_dmaengine_buffer_teardown() function
is added to unwind everything done in iio_dmaengine_buffer_setup_ext().
This keeps things more symmetrical with obvious pairs alloc/free and
setup/teardown.
Calling dma_get_slave_caps() in iio_dmaengine_buffer_alloc() is moved so
that we can avoid any gotos for error unwinding.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-8-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Export this function in preparation for the fix in veml6030.c, where the
total gain can be used to ease the calculation of the processed value of
the IIO_LIGHT channel compared to acquiring the scale in NANO.
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250127-veml6030-scale-v3-1-4f32ba03df94@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move the call to fwnode_irq_get_byname() from the driver-specific
ad7173_fw_parse_device_config() to the shared ad_sd_init() function.
The main reason for this is that we want struct ad_sigma_delta_info to
be static const data that describes the actual ADC chip, not the
application-specific configuration or any runtime state.
Previously, this struct was being used to pass the IRQ number to the
shared ad_sd_init() function. Now, this is replaced by a boolean flag
that is set at compile time and the ad_sd_init() function handles
looking up the IRQ number instead. This also has the added benefit that
if any other drivers need to make use of this in the future, they just
have to set the flag and the shared code will take care of the rest
rather than duplicating the code in each driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250113-iio-adc-ad7313-fix-non-const-info-struct-v4-1-b63be3ecac4a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This helper functions reduce the burden in the drivers that want to
fetch a gain and time selector for a given scale or a new optimal gain.
The former is currently achieved by calling
iio_gts_find_gain_sel_for_scale_using_time() for the current time
selector, and then iterating over the rest of time selectors if the
gain selector was not found.
The latter requires a combination of multiple iio-gts helpers to find
the new gain, look for an optimal gain if there was no exact match, and
set a minimum gain if the optimal gain is not in the range of available
gains.
Provide simpler workflows by means of functions that address common
patterns in the users of the iio-gts helpers.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241230-veml3235_scale-v3-1-48a5795e2f64@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for STM32MP25 SoC. Use newly introduced compatible to handle
this new HW variant. Add TIM20 trigger definitions that can be used by
the stm32 analog-to-digital converter. Use compatible data to identify
it.
As the counter framework is now superseding the deprecated IIO counter
interface (IIO_COUNT), don't support it. Only register IIO trigger
devices for ADC usage. So, make the valids_table a cfg option.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20241220095927.1122782-4-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since there are no more direct accesses to the indio_dev->scan_timestamp
value, it can be marked as __private and use the macro ACCESS_PRIVATE()
in order to access it. Like this, static checkers will be able to inform
in case someone tries to either write to the value, or read its value
directly.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Attributes of iio providers are exposed via sysfs. Typically, providers
pass attribute values to the iio core, which handles formatting and
printing to sysfs. However, some attributes, such as labels or extended
info, are directly formatted and printed to sysfs by provider drivers
using sysfs_emit() and sysfs_emit_at(). These helpers assume the read
buffer, allocated by sysfs fop, is page-aligned. When these attributes
are accessed by consumer drivers, the read buffer is allocated by the
consumer and may not be page-aligned, leading to failures in the
provider's callback that utilizes sysfs_emit*.
Add a check to ensure that read buffers for labels and external info
attributes are page-aligned. Update the prototype documentation as well.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20241202-iio-kmalloc-align-v1-1-aa9568c03937@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The various chips can be reset using a sequence of SPI transfers with
MOSI = 1. The length of such a sequence varies from chip to chip. Store
that length in struct ad_sigma_delta_info and replace the respective
parameter to ad_sd_reset() with it.
Note the ad7192 used to pass 48 as length but the documentation
specifies 40 as the required length. Assuming the latter is right.
(Using a too long sequence doesn't hurt apart from using a longer spi
transfer than necessary, so this is no relevant fix.)
The motivation for storing this information is that this is useful to
clear a pending R̅D̅Y̅ signal in the next change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9750db62fce638bf140ff48172c23bff7f785e5b.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad_sigma_delta driver helper uses irq_disable_nosync(). With that
one it is possible that the irq handler still runs after the
irq_disable_nosync() function call returns. Also to properly synchronize
irq disabling in the different threads proper locking is needed and
because it's unclear if the irq handler's irq_disable_nosync() call
comes first or the one in the enabler's error path, all code locations
that disable the irq must check for .irq_dis first to ensure there is
exactly one disable call per enable call.
So add a spinlock to the struct ad_sigma_delta and use it to synchronize
irq enabling and disabling. Also only act in the irq handler if the irq
is still enabled.
Fixes: af3008485e ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9e6def47e2e773e0e15b7a2c29d22629b53d91b1.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some of the ADCs by Analog signal their irq condition on the MISO line.
So typically that line is connected to an SPI controller and a GPIO. The
GPIO is used as input and the respective interrupt is enabled when the
last SPI transfer is completed.
Depending on the GPIO controller the toggling MISO line might make the
interrupt pending even while it's masked. In that case the irq handler
is called immediately after irq_enable() and so before the device
actually pulls that line low which results in non-sense values being
reported to the upper layers.
The only way to find out if the line was actually pulled low is to read
the GPIO. (There is a flag in AD7124's status register that also signals
if an interrupt was asserted, but reading that register toggles the MISO
line and so might trigger another spurious interrupt.)
Add the possibility to specify an interrupt GPIO in the machine
description in addition to the plain interrupt. This GPIO is used then
to check if the irq line is actually active in the irq handler.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/5be9a4cc4dc600ec384c88db01dd661a21506b9c.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Torvalds