- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma
-----BEGIN PGP SIGNATURE-----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=beF+
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
Highlights:
- asus-wmi: Add support for vivobook fan profiles
- dell-laptop: Add knobs to change battery charge settings
- lg-laptop: Add operation region support
- intel-uncore-freq: Add support for efficiency latency control
- intel/ifs: Add SBAF test support
- intel/pmc: Ignore all LTRs during suspend
- platform/surface: Support for arm64 based Surface devices
- wmi: Pass event data directly to legacy notify handlers
- x86/platform/geode: switch GPIO buttons and LEDs to software properties
- bunch of small cleanups, fixes, hw-id additions, etc.
The following is an automated git shortlog grouped by driver:
Documentation:
- admin-guide: pm: Add efficiency vs. latency tradeoff to uncore documentation
ISST:
- Simplify isst_misc_reg() and isst_misc_unreg()
MAINTAINERS:
- adjust file entry in INTEL MID PLATFORM
- Add Intel MID section
Merge tag 'hwmon-for-v6.11-rc7' into review-hans:
- Merge tag 'hwmon-for-v6.11-rc7' into review-hans
Merge tag 'platform-drivers-x86-v6.11-3' into review-hans:
- Merge tag 'platform-drivers-x86-v6.11-3' into review-hans
acer-wmi:
- Use backlight power constants
asus-laptop:
- Use backlight power constants
asus-nb-wmi:
- Use backlight power constants
asus-wmi:
- don't fail if platform_profile already registered
- add debug print in more key places
- Use backlight power constants
- add support for vivobook fan profiles
dell-laptop:
- remove duplicate code w/ battery function
- Add knobs to change battery charge settings
dt-bindings:
- platform: Add Surface System Aggregator Module
- serial: Allow embedded-controller as child node
eeepc-laptop:
- Use backlight power constants
eeepc-wmi:
- Use backlight power constants
fujitsu-laptop:
- Use backlight power constants
hid-asus:
- use hid for brightness control on keyboard
ideapad-laptop:
- Make the scope_guard() clear of its scope
- move ACPI helpers from header to source file
- Use backlight power constants
int3472:
- Use str_high_low()
- Use GPIO_LOOKUP() macro
- make common part a separate module
intel-hid:
- Use string_choices API instead of ternary operator
intel/pmc:
- Ignore all LTRs during suspend
- Remove unused param idx from pmc_for_each_mode()
intel_scu_ipc:
- Move intel_scu_ipc.h out of arch/x86/include/asm
intel_scu_wdt:
- Move intel_scu_wdt.h to x86 subfolder
lenovo-ymc:
- Ignore the 0x0 state
lg-laptop:
- Add operation region support
oaktrail:
- Use backlight power constants
panasonic-laptop:
- Add support for programmable buttons
platform/mellanox:
- mlxbf-pmc: fix lockdep warning
platform/olpc:
- Remove redundant null pointer checks in olpc_ec_setup_debugfs()
platform/surface:
- Add OF support
platform/x86/amd:
- pmf: Add quirk for TUF Gaming A14
platform/x86/amd/pmf:
- Update SMU metrics table for 1AH family series
- Relocate CPU ID macros to the PMF header
- Add support for notifying Smart PC Solution updates
platform/x86/intel-uncore-freq:
- Add efficiency latency control to sysfs interface
- Add support for efficiency latency control
- Do not present separate package-die domain
platform/x86/intel/ifs:
- Fix SBAF title underline length
- Add SBAF test support
- Add SBAF test image loading support
- Refactor MSR usage in IFS test code
platform/x86/intel/pmc:
- Show live substate requirements
platform/x86/intel/pmt:
- Use PMT callbacks
platform/x86/intel/vsec:
- Add PMT read callbacks
platform/x86/intel/vsec.h:
- Move to include/linux
samsung-laptop:
- Use backlight power constants
serial-multi-instantiate:
- Don't require both I2C and SPI
thinkpad_acpi:
- Fix uninitialized symbol 's' warning
- Add Thinkpad Edge E531 fan support
touchscreen_dmi:
- add nanote-next quirk
trace:
- platform/x86/intel/ifs: Add SBAF trace support
wmi:
- Call both legacy and WMI driver notify handlers
- Merge get_event_data() with wmi_get_notify_data()
- Remove wmi_get_event_data()
- Pass event data directly to legacy notify handlers
x86-android-tablets:
- Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
- Fix spelling in the comments
x86/platform/geode:
- switch GPIO buttons and LEDs to software properties
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmbq2tYUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xKYAgAoXZt1MjBDA1mP813i4bj8CYQHWO+
YnugVhEccucxgC6sBGzQeRLBNuG/VaBN6tyJ1pKYMpWV5gSthq1Iop+DZbno2ciM
QAnSSzioHB/dhYBXuKmZatkMsKLjLjtfcexUed9DfwKapqFl3XQMb6cEYasM37hH
197K4yAFF3oqQImlACwQDxN1q3eCG6bdIbEAByZW7yH644IC5zH8/CiFjTCwUx/F
aFIHQlLLzt1kjhD8AbRHhRcsGbzG2ejHsC3yrQddEJSOkInDO8baR0aDyhBTUFPE
lztuekFfaJ1Xcyoc/Zf4pi3ab1Djt+Htck3CHLO/xcl0YYMlM5vcs1QlhQ==
=sAk7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Hans de Goede:
- asus-wmi: Add support for vivobook fan profiles
- dell-laptop: Add knobs to change battery charge settings
- lg-laptop: Add operation region support
- intel-uncore-freq: Add support for efficiency latency control
- intel/ifs: Add SBAF test support
- intel/pmc: Ignore all LTRs during suspend
- platform/surface: Support for arm64 based Surface devices
- wmi: Pass event data directly to legacy notify handlers
- x86/platform/geode: switch GPIO buttons and LEDs to software
properties
- bunch of small cleanups, fixes, hw-id additions, etc.
* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
MAINTAINERS: adjust file entry in INTEL MID PLATFORM
platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
platform/mellanox: mlxbf-pmc: fix lockdep warning
platform/x86/amd: pmf: Add quirk for TUF Gaming A14
platform/x86: touchscreen_dmi: add nanote-next quirk
platform/x86: asus-wmi: don't fail if platform_profile already registered
platform/x86: asus-wmi: add debug print in more key places
platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
MAINTAINERS: Add Intel MID section
platform/x86: panasonic-laptop: Add support for programmable buttons
platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
platform/x86: intel/pmc: Ignore all LTRs during suspend
platform/x86: wmi: Call both legacy and WMI driver notify handlers
platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
platform/x86: wmi: Remove wmi_get_event_data()
platform/x86: wmi: Pass event data directly to legacy notify handlers
platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
platform/x86: x86-android-tablets: Fix spelling in the comments
platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
...
* New drivers
- Driver for Sophgo SG2042 external hardware monitor
- Thermal sensor driver for Surface Aggregator Module
* Added support to existing drivers
- oxp-sensors: Support for multiple new devices.
- nct6775: Added G15CF to ASUS WMI monitoring list
* Modernizations
- ina2xx: Driver cleanup and update to use with_info API
- lm92: Driver cleanup and update to use regmap and with_info API
- lm95234: Driver cleanup and update to use regmap and with_info API
- max1619: Driver cleanup and update to use regmap and with_info API
- max1668: Driver cleanup and update to use regmap and with_info API
- max6697: Driver cleanup and update to use regmap and with_info API
* API updates
- Removed unused devm_hwmon_device_unregister() API function
* Other notable changes
- Implement and use generic bus access delay for pmbus drivers
- Use with scoped for each OF child loop in several drivers
- Module unloading fixes for gsc-hwmon and ntc_thermistor drivers
- Converted various drivers to use multi-byte regmap operations
- adt7475: Improved devicetree based configuration
- ltc2947: Move to firmware agnostic API
- ltc2978: Converted devicetree description to yaml
- max16065: Addressed overflows when writing limit attributes
* Various other minor cleanups, fixes and improvements
-----BEGIN PGP SIGNATURE-----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=z6jf
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- driver for Sophgo SG2042 external hardware monitor
- thermal sensor driver for Surface Aggregator Module
Added support to existing drivers:
- oxp-sensors: Support for multiple new devices.
- nct6775: Added G15CF to ASUS WMI monitoring list
Modernizations:
- driver cleanup and update to use with_info API: ina2xx, lm92,
lm95234, max1619, max1668, and max6697.
API updates:
- removed unused devm_hwmon_device_unregister() API function
Other notable changes
- implement and use generic bus access delay for pmbus drivers
- use with scoped for each OF child loop in several drivers
- module unloading fixes for gsc-hwmon and ntc_thermistor drivers
- converted various drivers to use multi-byte regmap operations
- adt7475: Improved devicetree based configuration
- ltc2947: Move to firmware agnostic API
- ltc2978: Converted devicetree description to yaml
- max16065: Addressed overflows when writing limit attributes
Various other minor cleanups, fixes and improvements"
* tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (96 commits)
hwmon: Remove devm_hwmon_device_unregister() API function
hwmon: (sch5636) Print unknown ID in error string via %*pE
hwmon: (sht21) Use %*ph to print small buffer
hwmon: (pmbus/mpq7932) Constify struct regulator_desc
hwmon: pmbus: pli12096bc: Add write delay
hwmon: pmbus: zl6100: Use generic code
hwmon: pmbus: ucd9000: Use generic code
hwmon: pmbus: max15301: Use generic code
hwmon: pmbus: Implement generic bus access delay
hwmon: (ina2xx) Use shunt voltage to calculate current
hwmon: (ina2xx) Add support for current limits
hwmon: (ina2xx) Pass register to alert limit write functions
hwmon: (ina2xx) Convert to use with_info hwmon API
hwmon: (ina2xx) Move ina2xx_get_value()
hwmon: (ina2xx) Set alert latch
hwmon: (ina2xx) Consolidate chip initialization code
hwmon: (ina2xx) Fix various overflow issues
hwmon: (ina2xx) Re-initialize chip using regmap functions
hwmon: (ina2xx) Use local regmap pointer if used more than once
hwmon: (ina2xx) Mark regmap_config as const
...
Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the deprecated
code
- implement and use swnode_gpio_get_reference(): a wrapper simplifying
the underlying calls to fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives where
possible
- drop support for legacy platform data from gpio-ath79 and gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/
-----BEGIN PGP SIGNATURE-----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=vVau
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
No particularly important patchset this cycle, but we have a few usual
improvements: like using a better/more recent helper or checking a
return value.
* Raw NAND changes
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
* SPI NOR changes
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmbmu/YACgkQJWrqGEe9
VoSAuAf/d0vnIFjGvh6zH/eT8hsolVP2up6Fs3wMeZ2BqvrIY4s4VNATRbHhgg56
aFx+6+31tYLHkfGm5TXNiydWp2aw9ms83/OXOsXUW6vuJZv1URneRqJhyGHD/TDl
VtEHkIcqJAYNdm0n5m5m/NVDGotkL5CFS2L+RLtC+23GvjvaJpaLe2VTHc1jR/2P
gJ98+9NiA/uLomEfYtpwCirmdReGPgnAwP70MucjLNydHOdNGA0SzQfOt9NIph8S
y2+3hWZRZcb13Ggw8z1DlbdwQI00raWu042AAkyaVOVOPWEJNyZRu0DFpI0V+4Kl
bX616HAZsFSn/5RIiH4Xu2XOj4EzPw==
=K3Rh
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- No particularly important patchset this cycle, but we have a few
usual improvements: like using a better/more recent helper or
checking a return value.
Raw NAND changes:
- The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers
- a couple of exit path have been fixed (mtk, denali)
- TI GPMC bindings have been enhanced to comply with up-to-date
partition descriptions
- a load of small and misc fixes
SPI-NAND changes:
- The most impacting series this cycle is bringing support for
continuous reads in the SPI-NAND subsystem.
This is a feature already merged in the raw NAND subsystem which
allows optimizing the internal fetch times in the chip while
reading sequential pages within an eraseblock.
For now only Macronix NANDs benefit from this feature. While we are
talking about Macronix, some of their chip need an explicit action
for selecting a different plane, and support for it has also been
brought.
- The bitflip threshold has also been set to the same arbitrary level
as in the raw NAND subsystem to optimize wear leveling decisions
- Add upport for a new Winbond chip
SPI NOR changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name.
The probe path tries to access the name without checking its
existence first. S28HS256T is the first flash to define its entry
without a name, uncovering this issue"
* tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits)
mtd: spi-nor: fix flash probing
mtd: spi-nor: spansion: Add support for S28HS256T
mtd: spi-nor: winbond: add Zetta ZD25Q128C support
mtd: spi-nor: micron-st: Add n25q064a WP support
mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`
mtd: spinand: macronix: Flag parts needing explicit plane select
mtd: spinand: Add support for setting plane select bits
dt-bindings: mtd: ti, gpmc-nand: support partitions node
mtd: rawnand: mtk: Fix init error path
mtd: powernv: Add check devm_kasprintf() returned value
mtd: rawnand: mtk: Factorize out the logic cleaning mtk chips
mtd: rawnand: atmel: Add message on DMA usage
mtd: rawnand: meson: Fix typo in function name
mtd: spi-nand: macronix: Continuous read support
mtd: spi-nand: macronix: Add a possible bitflip status flag
mtd: spi-nand: macronix: Extract the bitflip retrieval logic
mtd: spi-nand: macronix: Fix helper name
mtd: spi-nand: Expose spinand_write_reg_op()
mtd: spi-nand: Add continuous read support
mtd: spi-nand: Isolate the MTD read logic in a helper
...
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a platform/x86 library that can only be used on x86 devices.
so it makes sense that it lives under the platform_data/x86/ directory
instead.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace ksz8830 with ksz88x3 for CHIP_ID definition and other
strings. This due to KSZ8830 not being an actual switch but the Chip
ID shared among KSZ8863/8873 switches, impossible to differentiate
from their Chip ID or Revision ID registers.
Now all KSZ*_CHIP_ID macros refer to actual, existing switches which
removes confusion.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no in-tree users of platform data and any new ones should
either use device tree or static device properties, so let's remove
platform data support.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no more any board files that use the platform data for
gpio-davinci. We can remove the header defining it and port the code to
no longer store any context in pdata.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240819151705.37258-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based
Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI
Accelerator devices.
https://www.xilinx.com/applications/data-center/v70.html
The QDMA subsystem is used in conjunction with the PCI Express IP block
to provide high performance data transfer between host memory and the
card's DMA subsystem.
+-------+ +-------+ +-----------+
PCIe | | | | | |
Tx/Rx | | | | AXI | |
<=======> | PCIE | <===> | QDMA | <====>| User Logic|
| | | | | |
+-------+ +-------+ +-----------+
The primary mechanism to transfer data using the QDMA is for the QDMA
engine to operate on instructions (descriptors) provided by the host
operating system. Using the descriptors, the QDMA can move data in both
the Host to Card (H2C) direction, or the Card to Host (C2H) direction.
The QDMA provides a per-queue basis option whether DMA traffic goes
to an AXI4 memory map (MM) interface or to an AXI4-Stream interface.
The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg302-qdma
Implements dmaengine APIs to support MM DMA transfers.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it
shares some registers and functions in those switches already
implemented in the KSZ DSA driver.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no longer any users of the platform data for davinci rawnand
in board files. We can remove the public pdata headers and move the
structures that are still used into the driver compilation unit while
removing the rest.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240814122120.13975-1-brgl@bgdev.pl
The users of this driver were removed in 2013 in commit 28633c54bd
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no longer any users of the ti-aemif driver that set up platform
data from board files. We can shrink the driver by removing support for
it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-1-27b1e5001390@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On almost all ASUS ROG series laptops the MCU used for the USB keyboard
also has a HID packet used for setting the brightness. This is usually
the same as the WMI method. But in some laptops the WMI method either
is missing or doesn't work, so we should default to the HID control.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240713074733.77334-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.
These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes.
As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Platform data is not used anywhere in the upstram kernel.
Drop support for it to simplify code maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some hardware need some time to switch from a bus to another. This can
cause the first transfers following the selection of a bus to fail.
There is no way to configure this kind of waiting time in the driver.
Add support for the 'settle-time-us' device-tree property. When set,
the i2c_mux_gpio_select() applies a delay before returning, leaving
enough time to the hardware to switch to the new bus.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
Highlights:
- amd/pmf: Report system state changes using existing input
events
- asus-wmi: Zenbook 2023 camera LED disable support and fix
TUF laptop keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus
laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy
interfaces are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit
CPU numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition
of C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Remove update system state document
- Use existing input event codes to update system states
- Use memdup_user()
arm64:
- add Lenovo Yoga C630 WOS EC driver
- build drivers even on non-ARM64 platforms
- EC_ACER_ASPIRE1 should depend on ARCH_QCOM
- EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
arm64: lenovo-yoga-c630:
- select AUXILIARY_BUS
asus-tf103c-dock:
- Use 2-argument strscpy()
asus-wmi:
- fix TUF laptop RGB variant
- support the disable camera LED on F10 of Zenbook 2023
dell-pc:
- avoid double free and invalid unregistration
- Implement platform_profile
dell-smbios:
- Add helper for checking supported class
- Move request functions for reuse
Docs/admin-guide:
- Remove pmf leftover reference from the index
doc: TPMI:
- Add entry for Performance Limit Reasons
dt-bindings: platform:
- Add Lenovo Yoga C630 EC
hp: hp-bioscfg:
- Use 2-argument strscpy()
hp-wmi:
- Fix implementation of the platform_profile_omen_get function
- Fix platform profile option switch bug on Omen and Victus laptops
ideapad-laptop:
- use cleanup.h
intel: chtwc_int33fe:
- Use 2-argument strscpy()
intel/ifs:
- Switch to new Intel CPU model defines
intel_ips:
- Switch to new Intel CPU model defines
intel/pmc:
- Add support to show ltr_ignore value
- Add support to undo ltr_ignore
- Convert index variables to be unsigned
- Move pmc assignment closer to first usage
- Remove unneeded min_t check
- Simplify mutex usage with cleanup helpers
- Switch to new Intel CPU model defines
- Use DEFINE_SHOW_STORE_ATTRIBUTE macro
- Use the Elvis operator
- Use the return value of pmc_core_send_msg
intel_scu_wdt:
- Switch to new Intel CPU model defines
intel_speed_select_if:
- Switch to new Intel CPU model defines
intel_telemetry:
- Switch to new Intel CPU model defines
intel/tpmi:
- Add API to get debugfs root
- Add new auxiliary driver for performance limits
- Add support for performance limit reasons
intel:
- TPMI domain id and CPU mapping
intel/tpmi/plr:
- Add support for the plr mailbox
- Fix output in plr_print_bits()
intel_turbo_max_3:
- Switch to new Intel CPU model defines
intel-uncore-freq:
- Get rid of magic min_max argument
- Get rid of magic values
- Get rid of uncore_read_freq driver API
- Re-arrange bit masks
- Rename the sysfs helper macro names
- Switch to new Intel CPU model defines
- Use generic helpers for current frequency
- Use uncore_index with read_control_freq
ISST:
- Add model specific loading for common module
- Avoid some SkyLake server models
- Use only TPMI interface when present
p2sb:
- Switch to new Intel CPU model defines
serial-multi-instantiate:
- Use 2-argument strscpy()
think-lmi:
- Use 2-argument strscpy()
thinkpad_acpi:
- Use 2-argument strscpy()
tools/power/x86/intel-speed-select:
- Set TRL MSR in 100 MHz units
- v1.20 release
wmi:
- Add bus ABI documentation
- Add driver_override support
x86/platform/atom:
- Switch to new Intel CPU model defines
Merges:
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZpZIdQAKCRBZrE9hU+XO
MbIEAQCMVjDuOJSSuS2u7/iVb41Q3+kjP6X0CmSpf8dmt3rH0gD/Z9Qynw6ArRY4
PPHY25ur8kPtwtyxHfCMcar6ESpztwU=
=L2LD
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
- Add DLVR and MSI interrupt support for the Lunar Lake platform to the
int340x thermal driver (Srinivas Pandruvada).
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck).
- Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
Gilbert).
- Improve intel_pch_thermal kernel log messages printed during suspend
to idle (Zhang Rui).
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri).
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki).
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki).
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski).
- Make the uniphier thermal driver use thermal_zone_for_each_trip() for
walking trip points (Rafael Wysocki).
- Fix and clean up several minor shortcomings in thermal debug (Rafael
Wysocki).
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki).
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki).
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki).
- Avoid invoking thermal governor .trip_crossed() callback for critical
and hot trip points (Rafael Wysocki).
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund).
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code
path (Théo Lebrun).
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis).
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani).
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa).
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski).
- Avoid failing thermal control initialization by using default values
on some platforms where calibration data is missing (Chen-Yu Tsai).
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski).
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski).
- Fix a race between removal and clock disable in the broadcom thermal
driver (Krzysztof Kozlowski).
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring).
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski).
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou).
-----BEGIN PGP SIGNATURE-----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=+BRm
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.
Specifics:
- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)
- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)
- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)
- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)
- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)
- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
The majority of the updates here are Dmitry Torokhov's cleanups
for platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node declarations.
The other updates are for the MAINTAINERS file, correcting some
stale or missing entries.
-----BEGIN PGP SIGNATURE-----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=/EgX
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
MCS-5000/5080 chips belong to the 1st generation of Melfas chips,
manufactured in 2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. It is likely
that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC), but the touchkey device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
Adds a sysfs entry for the LED on F10 above the crossed out camera icon
on 2023 Zenbooks.
Signed-off-by: Devin Bayer <dev@doubly.so>
Link: https://lore.kernel.org/r/20240628084603.217106-1-dev@doubly.so
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Retrieving the supported versions of a command is a fairly common
operation. Provide a helper for it.
If the command is not supported at all the EC returns
-EINVAL/EC_RES_INVALID_PARAMS.
This error is translated into an empty version mask as that is easier to
handle for callers and they don't need to know about the error details.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-3-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The charge-control command v2/v3 is more featureful than v1, it
additionally supports charge thresholds.
The definitions were imported from ChromeOS EC commit
32870d602317 ("squirtle: modify motionsense rotation matrix")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-2-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Lenovo Yoga C630 WOS is a laptop using Snapdragon 850 SoC. Like many
laptops it uses an embedded controller (EC) to perform various platform
operations, including, but not limited, to Type-C port control or power
supply handlng.
Add the driver for the EC, that creates devices for UCSI and power
supply devices.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-2-9f0b9b40ae76@linaro.org
[ij: added #include <linux/cleanup.h>]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Upgrade EC_CMD_GET_NEXT_EVENT to version 3.
The max supported version will be v3. So, we speak v3 even if the EC
says it supports v4+.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Link: https://lore.kernel.org/r/20240604230837.2878737-1-dnojiri@chromium.org
[tzungbi: uint32_t -> u32 per suggested by checkpatch.pl]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
To read from the EC memory different mechanism are possible.
ECs connected via LPC expose their memory via a ->cmd_readmem operation.
Other protocols require the usage of EC_CMD_READ_MEMMAP, which on the
other hand is not implemented by LPC ECs.
Provide a helper that automatically selects the correct mechanism.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-1-5cdf0c5db50a@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
further deprecate class based I2C device instantiation. All users are
converted, too. Other that that, Andi collected a number if I2C host
driver patches. Those merges have their own description.
-----BEGIN PGP SIGNATURE-----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=viLd
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places. The majority of
changes are about ASoC, especially SOF / Intel stuff, and we see an
interesting work for ASoC DAPM graph visualization, while there are
many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements
-----BEGIN PGP SIGNATURE-----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=YKT4
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release. There
were a couple of cleanups in the core but nothing substantial, the
updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver.
- Overhaul of the PXA2xx driver, mostly API updates.
- A number of DT binding conversions.
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB2z0ACgkQJNaLcl1U
h9CCxgf/ZSy6jKbUejdq/JtdrhVCamaEVQ1X5FAk18wlumQVwFC/Bsntr1hVWDjg
Ai+G/UYWtfabyVePZKh1zCcoloSuZheHcxAMP+43un1doWcHps6leiPfb9yAysux
VxeIBfSUOfeFbN697Jz8PDTIhxHMUh0R4QYqqIyrT1RSS0alRZoDyaQpTWied0Nt
pOUWi9SVt0jm/G+X29a6Q/pFsr0oEJHxZgvriwlJAyzWr1OModFXdTfdK+qMS1Hn
huafVu4bWCEognGlnXCQSRL94Fxo1nab1PvMuWK2VXNDL7xexqQ33cp4VILZvJo1
qR9YtiRXpScAmO7f8ccGcSlz8vw5jQ==
=x3Vz
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
i801 as only user of gpio i2c mux removed support for class-based device
instantiation on muxed busses. Class-based device instantiation is a
legacy mechanism and shouldn't be used in new code, therefore remove
support also here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
There are no more users that need the legacy idle quirk so let's drop
the legacy idle quirk handling. This simplifies the PM code to just
sysc_pm_ops with unified handling for all the interconnect targets.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds