The BPF verifier currently enforces a call stack depth of 8 frames,
regardless of the actual stack space consumption of those frames. The
limit is necessary for static call stacks, because the bookkeeping data
structures used by the verifier when stepping into static functions
during verification only support 8 stack frames. However, this
limitation only matters for static stack frames: Global subprogs are
verified by themselves and do not require limiting the call depth.
Relax this limitation to only apply to static stack frames. Verification
now only fails when there is a sequence of 8 calls to non-global
subprogs. Calling into a global subprog resets the counter. This allows
deeper call stacks, provided all frames still fit in the stack.
The change does not increase the maximum size of the call stack, only
the maximum number of frames we can place in it.
Also change the progs/test_global_func3.c selftest to use static
functions, since with the new patch it would otherwise unexpectedly
pass verification.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260316161225.128011-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit 5dbb19b16a ("bpf: Add third round of bounds deduction"), I
added a new round of bounds deduction because two rounds were not enough
to converge to a fixed point. This commit slightly refactor the bounds
deduction logic such that two rounds are enough.
In [1], Eduard noticed that after we improved the refinement logic, a
third call to the bounds deduction (__reg_deduce_bounds) was needed to
converge to a fixed point. More specifically, we needed this third call
to improve the s64 range using the s32 range. We added the third call
and postponed a more detailed analysis of the refinement logic.
I've been looking into this more recently. The register refinement
consists of the following calls.
__update_reg_bounds();
3 x __reg_deduce_bounds() {
deduce_bounds_32_from_64();
deduce_bounds_32_from_32();
deduce_bounds_64_from_64();
deduce_bounds_64_from_32();
};
__reg_bound_offset();
__update_reg_bounds();
From this, we can observe that we first improve the 32bit ranges from
the 64bit ranges in deduce_bounds_32_from_64, then improve the 64bit
ranges on their own in deduce_bounds_64_from_64. Intuitively, if we
were to improve the 64bit ranges on their own *before* we use them to
improve the 32bit ranges, we may reach a fixed point earlier.
In a similar manner, using CBMC, Eduard found that it's best to improve
the 32bit ranges on their own *after* we've improve them using the 64bit
ranges. That is, running deduce_bounds_32_from_32 after
deduce_bounds_32_from_64.
These changes allow us to lose one call to __reg_deduce_bounds. Without
this reordering, the test "verifier_bounds/bounds deduction cross sign
boundary, negative overlap" fails when removing one call to
__reg_deduce_bounds. In some cases, this change can even improve
precision a little bit, as illustrated in the new selftest in the next
patch.
As expected, this change didn't have any impact on the number of
instructions processed when running it through the Cilium complexity
test suite [2].
Link: https://lore.kernel.org/bpf/aIKtSK9LjQXB8FLY@mail.gmail.com/ [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/1b00d2749ec4c774c3ada84e265ac7fda72cfe56.1773401138.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds support to validate a pointer as not null when its
value is compared to a register whose value the verifier knows to be
null.
Initial pattern only verifies against an immediate operand.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260304195018.181396-3-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
fmod_ret BPF programs can only be attached to selected functions. For
convenience, the error injection list was originally used (along with
functions prefixed with "security_"), which contains syscalls and
several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n),
that list is empty and fmod_ret programs are effectively unavailable for
most of the functions. In such a case, at least enable fmod_ret programs
on syscalls.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/472310f9a5f4944ad03214e4d943a4830fd8eb76.1773055375.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sleepable BPF programs can only be attached to selected functions. For
convenience, the error injection list was originally used, which
contains syscalls and several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n),
that list is empty and sleepable tracing programs are effectively
unavailable. In such a case, at least enable sleepable programs on
syscalls. For discussion why syscalls were chosen, see [1].
To detect that a function is a syscall handler, we check for
arch-specific prefixes for the most common architectures. Unfortunately,
the prefixes are hard-coded in arch syscall code so we need to hard-code
them, too.
[1] https://lore.kernel.org/bpf/CAADnVQK6qP8izg+k9yV0vdcT-+=axtFQ2fKw7D-2Ei-V6WS5Dw@mail.gmail.com/
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/2704a8512746655037e3c02b471b31bd0d76c8db.1773055375.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
permissive for auxiliary clocks, to not reject syscalls
based on the status field that do not try to modify the
status field. This makes ABI behavior in clock_adjtime()
consistent with CLOCK_REALTIME.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zjov
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Make clock_adjtime() syscall timex validation slightly more permissive
for auxiliary clocks, to not reject syscalls based on the status field
that do not try to modify the status field.
This makes the ABI behavior in clock_adjtime() consistent with
CLOCK_REALTIME"
* tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix timex status validation for auxiliary clocks
PI and setscheduler() syscalls, resulting in kernel warnings
and misbehavior. Found during stress-testing.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vP5l
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a DL scheduler bug that may corrupt internal metrics during PI and
setscheduler() syscalls, resulting in kernel warnings and misbehavior.
Found during stress-testing"
* tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
- Fix possible NULL pointer dereference in trace_data_alloc()
On the error path in trace_data_alloc(), it can call trigger_data_free()
with a NULL pointer. This use to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue is
that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
Will only enable sched_waking where as:
trace_event=sched_switch,sched_waking
Will enable both.
The bootconfig makes it even worse as the second way is the more common
method.
The issue is that a temporary buffer is used to store the events to enable
later in boot. Each time the cmdline callback is called, it overwrites
what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size parameter
in the command line code causing overflow issues if more that 2G is
specified.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaaxEIRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn+QAQCM6aJm0ZqDD2dM262M1mQpkU7sW3Dz
hZfBpo3YlH55fQEAklsaD96+yKN7PLl1Vh4c0zCelMHZA7kgck/3GqaFAgA=
=rn/Z
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible NULL pointer dereference in trace_data_alloc()
On the trace_data_alloc() error path, it can call trigger_data_free()
with a NULL pointer. This used to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue
is that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
will only enable sched_waking whereas:
trace_event=sched_switch,sched_waking
will enable both.
The bootconfig makes it even worse as the second way is the more
common method.
The issue is that a temporary buffer is used to store the events to
enable later in boot. Each time the cmdline callback is called, it
overwrites what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size
parameter in the command line code causing overflow issues if more
that 2G is specified.
* tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
tracing: Fix enabling multiple events on the kernel command line and bootconfig
tracing: Add NULL pointer check to trigger_data_free()
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org
Fixes: 73c5162aa3 ("tracing: keep ring buffer to minimum size till used")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc2 ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=NNcQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
kthread_exit became a macro to do_exit in commit 28aaa9c399
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
- Fix a potential kernel panic in the module loader by adding a bounds
check for the ELF section index. This prevents crashes if attempting
to load a module that uses SHN_XINDEX or is corrupted.
- Fix the Kconfig menu layout for module versioning, signing, and
compression options so they correctly appear as submenus in menuconfig.
- Remove a redundant lockdep_free_key_range() call in the load_module()
error path. This is already handled by module_deallocate() calling
free_mod_mem() since the module_memory rework.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCaaeC1QAKCRBaByWrOaGn
enQ7AQCJWZPofsDiEN2GZsupXsMMn1kt4xkimGGlb55Fwq1/pQD+OfczUt63MBst
dwMJuaW4ndRQLRXFQHpoa441zjFCcgw=
=CkAk
-----END PGP SIGNATURE-----
Merge tag 'modules-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module fixes from Sami Tolvanen:
- Fix a potential kernel panic in the module loader by adding a bounds
check for the ELF section index. This prevents crashes if attempting
to load a module that uses SHN_XINDEX or is corrupted.
- Fix the Kconfig menu layout for module versioning, signing, and
compression options so they correctly appear as submenus in
menuconfig.
- Remove a redundant lockdep_free_key_range() call in the load_module()
error path. This is already handled by module_deallocate() calling
free_mod_mem() since the module_memory rework.
* tag 'modules-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Fix kernel panic when a symbol st_shndx is out of bounds
module: Fix the modversions and signing submenus
module: Remove duplicate freeing of lockdep classes
The timekeeping_validate_timex() function validates the timex status
of an auxiliary system clock even when the status is not to be changed,
which causes unexpected errors for applications that make read-only
clock_adjtime() calls, or set some other timex fields, but without
clearing the status field.
Do the AUX-specific status validation only when the modes field contains
ADJ_STATUS, i.e. the application is actually trying to change the
status. This makes the AUX-specific clock_adjtime() behavior consistent
with CLOCK_REALTIME.
Fixes: 4eca49d0b6 ("timekeeping: Prepare do_adtimex() for auxiliary clocks")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260225085231.276751-1-mlichvar@redhat.com
* Fix error when reporting jiffies converted values back to user space
Return the converted value instead of "Invalid argument" error.
* Testing
Spent around a week in linux-next -enough for this small fix-
-----BEGIN PGP SIGNATURE-----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=F0SK
-----END PGP SIGNATURE-----
Merge tag 'sysctl-7.00-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl fix from Joel Granados:
- Fix error when reporting jiffies converted values back to user space
Return the converted value instead of "Invalid argument" error
* tag 'sysctl-7.00-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
time/jiffies: Fix sysctl file error on configurations where USER_HZ < HZ
Running stress-ng --schedpolicy 0 on an RT kernel on a big machine
might lead to the following WARNINGs (edited).
sched: DL de-boosted task PID 22725: REPLENISH flag missing
WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8
... (running_bw underflow)
Call trace:
dequeue_task_dl+0x15c/0x1f8 (P)
dequeue_task+0x80/0x168
deactivate_task+0x24/0x50
push_dl_task+0x264/0x2e0
dl_task_timer+0x1b0/0x228
__hrtimer_run_queues+0x188/0x378
hrtimer_interrupt+0xfc/0x260
...
The problem is that when a SCHED_DEADLINE task (lock holder) is
changed to a lower priority class via sched_setscheduler(), it may
fail to properly inherit the parameters of potential DEADLINE donors
if it didn't already inherit them in the past (shorter deadline than
donor's at that time). This might lead to bandwidth accounting
corruption, as enqueue_task_dl() won't recognize the lock holder as
boosted.
The scenario occurs when:
1. A DEADLINE task (donor) blocks on a PI mutex held by another
DEADLINE task (holder), but the holder doesn't inherit parameters
(e.g., it already has a shorter deadline)
2. sched_setscheduler() changes the holder from DEADLINE to a lower
class while still holding the mutex
3. The holder should now inherit DEADLINE parameters from the donor
and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen
Fix the issue by introducing __setscheduler_dl_pi(), which detects when
a DEADLINE (proper or boosted) task gets setscheduled to a lower
priority class. In case, the function makes the task inherit DEADLINE
parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to
ensure proper bandwidth accounting during the next enqueue operation.
Fixes: 2279f540ea ("sched/deadline: Fix priority inheritance with multiple scheduling classes")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260302-upstream-fix-deadline-piboost-b4-v3-1-6ba32184a9e0@redhat.com
Commit 2dc164a48e ("sysctl: Create converter functions with two new
macros") incorrectly returns error to user space when jiffies sysctl
converter is used. The old overflow check got replaced with an
unconditional one:
+ if (USER_HZ < HZ)
+ return -EINVAL;
which will always be true on configurations with "USER_HZ < HZ".
Remove the check; it is no longer needed as clock_t_to_jiffies() returns
ULONG_MAX for the overflow case and proc_int_u2k_conv_uop() checks for
"> INT_MAX" after conversion
Fixes: 2dc164a48e ("sysctl: Create converter functions with two new macros")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When function trace PID filtering is enabled, the function tracer will
attach a callback to the fork tracepoint as well as the exit tracepoint
that will add the forked child PID to the PID filtering list as well as
remove the PID that is exiting.
Commit a46023d561 ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast") removed the disabling of preemption
when calling tracepoint callbacks.
The callbacks used for the PID filtering accounting depended on preemption
being disabled, and now the trigger a "suspicious RCU usage" warning message.
Make them explicitly disable preemption.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302213546.156e3e4f@gandalf.local.home
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes: 69fd337a97 ("bpf: per-cgroup lsm flavor")
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com
- Fix circular locking dependency in cpuset partition code by deferring
housekeeping_update() calls to a workqueue instead of calling them
directly under cpus_read_lock.
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure.
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask() in
update_cpumasks_hier().
- Fix race between task migration and cgroup iteration.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaadVVQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGef0AQDLuJE3vzc2VeCBc4rGcj7ZSRmc3tc28lOqHRzi
XEx1iwD+PeFcb9wt1CTqA5hAiIY1LGR/5iO1kTH7paRd16DBRAc=
=S8WE
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix circular locking dependency in cpuset partition code by
deferring housekeeping_update() calls to a workqueue instead
of calling them directly under cpus_read_lock
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask()
in update_cpumasks_hier()
- Fix race between task migration and cgroup iteration
* tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix null-ptr-deref in rebuild_sched_domains_cpuslocked
cgroup/cpuset: Call housekeeping_update() without holding cpus_read_lock
cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue
cgroup/cpuset: Move housekeeping_update()/rebuild_sched_domains() together
kselftest/cgroup: Simplify test_cpuset_prs.sh by removing "S+" command
cgroup/cpuset: Set isolated_cpus_updating only if isolated_cpus is changed
cgroup/cpuset: Clarify exclusion rules for cpuset internal variables
cgroup/cpuset: Fix incorrect use of cpuset_update_tasks_cpumask() in update_cpumasks_hier()
cgroup/cpuset: Fix incorrect change to effective_xcpus in partition_xcpus_del()
cgroup: fix race between task migration and iteration
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread.
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs.
- Fix a preemption window during scheduler exit and a refcount underflow
in cgroup init error path.
- Fix SCX_EFLAG_INITIALIZED being a no-op flag.
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks.
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaadTZA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGdf9AQDmsZ8Y3uOJV/5K5RuEoo6SDPmCjr+JXPZu45kD
+UBj3wD9F8DPq+g+KnD7jILhqUdOTePhhNrVYbVw3e1x29EYBQ0=
=nRTC
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs
- Fix a preemption window during scheduler exit and a refcount
underflow in cgroup init error path
- Fix SCX_EFLAG_INITIALIZED being a no-op flag
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync
* tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
sched_ext: Remove redundant css_put() in scx_cgroup_init()
selftests/sched_ext: Fix peek_dsq.bpf.c compile error for clang 17
selftests/sched_ext: Add -fms-extensions to bpf build flags
tools/sched_ext: Add -fms-extensions to bpf build flags
sched_ext: Use READ_ONCE() for plain reads of scx_watchdog_timeout
sched_ext: Replace naked scx_root dereferences in kobject callbacks
sched_ext: Use READ_ONCE() for the read side of dsq->nr update
tools/sched_ext: fix strtoul() misuse in scx_hotplug_seq()
sched_ext: Fix SCX_EFLAG_INITIALIZED being a no-op flag
sched_ext: Fix out-of-bounds access in scx_idle_init_masks()
sched_ext: Disable preemption between scx_claim_exit() and kicking helper work
tools/sched_ext: Add Kconfig to sync with upstream
tools/sched_ext: Sync README.md Kconfig with upstream scx
selftests/sched_ext: Remove duplicated unistd.h include in rt_stall.c
tools/sched_ext: scx_sdt: Remove unused '-f' option
tools/sched_ext: scx_central: Remove unused '-p' option
selftests/sched_ext: Fix unused-result warning for read()
selftests/sched_ext: Abort test loop on signal
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock.
Fixes: 8c2090c504 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
Global subprogs are currently not allowed to return void. Adjust
verifier logic to allow global functions with a void return type.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
From: Eduard Zingerman <eddyz87@gmail.com>
Both main progs and subprogs use the same function in the verifier,
check_return_code, to verify the type and value range of the register
being returned. However, subprogs only need a subset of the logic in
check_return_code. this also goes the way - check_return_code explicitly
checks whether it is handling a subprogram in multiple places, complicating
the logic. Separate the handling of the two into separate functions.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
From: Eduard Zingerman <eddyz87@gmail.com>
The check_return_code function has explicit checks on whether
a program type can return void. Factor this logic out to reuse
it later for both main progs and subprogs.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Factor the return value range calculation logic in check_return_code
out of the function in preparation for separating the return value
validation logic for BPF_EXIT and bpf_throw().
No functional changes. The change made in return_retval_code's handling
of PROG_TRACING program types (not error'ing on the default case) is a
no-op because the match on the program attach type is exhaustive.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The limitation on fixed offsets stems from the fact that certain program
types rewrite the accesses to the context structure and translate them
to accesses to the real underlying type. Technically, in the past, we
could have stashed the register offset in insn_aux and made rewrites
work, but we've never needed it in the past since the offset for such
context structures easily fit in the s16 signed instruction offset.
Regardless, the consequence is that for program types where the program
type's verifier ops doesn't supply a convert_ctx_access callback, we
unnecessarily reject accesses with a modified ctx pointer (i.e., one
whose offset has been shifted) in check_ptr_off_reg. Make an exception
for such program types (like syscall, tracepoint, raw_tp, etc.).
Pass in fixed_off_ok as true to __check_ptr_off_reg for such cases, and
accumulate the register offset into insn->off passed to check_ctx_access.
In particular, the accumulation is critical since we need to correctly
track the max_ctx_offset which is used for bounds checking the buffer
for syscall programs at runtime.
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260227005725.1247305-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cpu_map_bpf_prog_run_xdp() handles XDP_PASS, XDP_REDIRECT, and
XDP_DROP but is missing an XDP_ABORTED case. Without it, XDP_ABORTED
falls into the default case which logs a misleading "invalid XDP
action" warning instead of tracing the abort via trace_xdp_exception().
Add the missing XDP_ABORTED case with trace_xdp_exception(), matching
the handling already present in the skb path (cpu_map_bpf_prog_run_skb),
devmap (dev_map_bpf_prog_run), and the generic XDP path (do_xdp_generic).
Also pass xdpf->dev_rx instead of NULL to bpf_warn_invalid_xdp_action()
in the default case, so the warning includes the actual device name.
This aligns with the generic XDP path in net/core/dev.c which already
passes the real device.
Signed-off-by: Anand Kumar Shaw <anandkrshawheritage@gmail.com>
Link: https://lore.kernel.org/r/20260218042924.42931-1-anandkrshawheritage@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implementing BPF version of preempt_count() requires accessing lowcore
from BPF. Since lowcore can be relocated, open-coding
(struct lowcore *)0 does not work, so add a kfunc.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20260217160813.100855-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability.
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_watchdog_timeout is written with WRITE_ONCE() in scx_enable():
WRITE_ONCE(scx_watchdog_timeout, timeout);
However, three read-side accesses use plain reads without the matching
READ_ONCE():
/* check_rq_for_timeouts() - L2824 */
last_runnable + scx_watchdog_timeout
/* scx_watchdog_workfn() - L2852 */
scx_watchdog_timeout / 2
/* scx_enable() - L5179 */
scx_watchdog_timeout / 2
The KCSAN documentation requires that if one accessor uses WRITE_ONCE()
to annotate lock-free access, all other accesses must also use the
appropriate accessor. Plain reads alongside WRITE_ONCE() leave the pair
incomplete and can trigger KCSAN warnings.
Note that scx_tick() already uses the correct READ_ONCE() annotation:
last_check + READ_ONCE(scx_watchdog_timeout)
Fix the three remaining plain reads to match, making all accesses to
scx_watchdog_timeout consistently annotated and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_attr_ops_show() and scx_uevent() access scx_root->ops.name directly.
This is problematic for two reasons:
1. The file-level comment explicitly identifies naked scx_root
dereferences as a temporary measure that needs to be replaced
with proper per-instance access.
2. scx_attr_events_show(), the neighboring sysfs show function in
the same group, already uses the correct pattern:
struct scx_sched *sch = container_of(kobj, struct scx_sched, kobj);
Having inconsistent access patterns in the same sysfs/uevent
group is error-prone.
The kobject embedded in struct scx_sched is initialized as:
kobject_init_and_add(&sch->kobj, &scx_ktype, NULL, "root");
so container_of(kobj, struct scx_sched, kobj) correctly retrieves
the owning scx_sched instance in both callbacks.
Replace the naked scx_root dereferences with container_of()-based
access, consistent with scx_attr_events_show() and in preparation
for proper multi-instance scx_sched support.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_dsq_nr_queued() reads dsq->nr via READ_ONCE() without holding
any lock, making dsq->nr a lock-free concurrently accessed variable.
However, dsq_mod_nr(), the sole writer of dsq->nr, only uses
WRITE_ONCE() on the write side without the matching READ_ONCE() on the
read side:
WRITE_ONCE(dsq->nr, dsq->nr + delta);
^^^^^^^
plain read -- KCSAN data race
The KCSAN documentation requires that if one accessor uses READ_ONCE()
or WRITE_ONCE() on a variable to annotate lock-free access, all other
accesses must also use the appropriate accessor. A plain read on the
right-hand side of WRITE_ONCE() leaves the pair incomplete and will
trigger KCSAN warnings.
Fix by using READ_ONCE() for the read side of the update:
WRITE_ONCE(dsq->nr, READ_ONCE(dsq->nr) + delta);
This is consistent with scx_bpf_dsq_nr_queued() and makes the
concurrent access annotation complete and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
for the common HZ=100, 250 or 1000 cases, only inlining them
for odd HZ values like HZ=300.
The inlining overhead showed up in performance tests of the TCP code.
(Marked as an RFC pull request, as it's not a regression.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=duTI
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected
un-inlining, which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and
want to avoid. The visible ugliness of the new reserved field
will be avoided the next time the RSEQ area is extended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nxqx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
Emil Tsalapatis