Commit e18947038b ("ACPI: driver: Do not set acpi_device_class()
unnecessarily") modified acpi_button_remove() to clear the device class
field in struct acpi_device on driver removal, but it should also have
updated the rollback path in acpi_button_probe(), which it didn't do,
so do it now.
Fixes: e18947038b ("ACPI: driver: Do not set acpi_device_class() unnecessarily")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/6167713.MhkbZ0Pkbq@rafael.j.wysocki
Prior to commit 57c31e6d62 ("ACPI: scan: Use acpi_setup_gpe_for_wake()
for buttons"), ACPI button wakeup GPEs having handler methods remained
enabled after acpi_wakeup_gpe_init(), but currently they are not enabled
because acpi_setup_gpe_for_wake() disables them.
That causes function keys to stop working on some systems [1] and there
may be other related issues elsewhere.
To address that, make the ACPI button driver enable wakeup GPEs for ACPI
buttons so long as they have handler methods. While this does not
restore the old behavior exactly (the ACPI button driver needs to be
bound to the button devices for the GPEs to be enabled), it should be
sufficient to restore the missing functionality.
For this purpose, introduce acpi_enable_gpe_cond() that enables
a GPE if its dispatch type matches the supplied one and modify
acpi_button_probe() to use that function for enabling the GPEs in
question.
Fixes: 57c31e6d62 ("ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons")
Reported-by: Nick <nick@kousu.ca>
Closes: https://lore.kernel.org/linux-acpi/E2OXET.4X5GTP37VTNC3@kousu.ca/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Nick <nick@kousu.ca>
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
Link: https://patch.msgid.link/9629117.CDJkKcVGEf@rafael.j.wysocki
Commit a7e23ec17f ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate.
Fixes: a7e23ec17f ("ACPI: button: Install notifier for system events as well")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.15+ <stable@vger.kernel.org> # 6.15+
Link: https://patch.msgid.link/7954431.EvYhyI6sBW@rafael.j.wysocki
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4516068.ejJDZkT8p0@rafael.j.wysocki
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
Several core ACPI device drivers set acpi_device_class() for the given
struct acpi_device to whatever they like, but that value is never used
unless the driver itself uses it and, sadly, they neglect to clear it on
remove. Since the only one of them still using acpi_device_class()
after previous changes is the button driver, update the others to stop
setting it in vain. Also drop the related device class sybmols that
become redundant.
Since the ACPI button driver continues to use acpi_device_class(), make
it clear the struct field represented by acpi_device_class() in its
remove callback.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3706295.iIbC2pHGDl@rafael.j.wysocki
Update several core ACPI device drivers that use
acpi_bus_generate_netlink_event() for generating netlink messages to
pass a string literal as its first argument instead of a pointer to
pnp.device_class in a given struct acpi_device, which will allow them
to avoid initializing the pnp.device_class field in the future.
The ACPI button driver that uses different acpi_device_class()
values for different button types will still pass it to
acpi_bus_generate_netlink_event(), but update it to use the
acpi_device_class() macro instead of open coding the pointer
access path.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/7944022.EvYhyI6sBW@rafael.j.wysocki
ACPI drivers usually set acpi_device_name() for the given struct
acpi_device to whatever they like, but that value is never used unless
the driver itself uses it and, quite unfortunately, drivers neglect to
clear it on remove. Some drivers use it for printing messages or
initializing the names of subordinate devices, but it is better to use
string literals for that, especially if the given one is used just once.
To eliminate unnecessary overhead related to acpi_device_name()
handling, rework multiple core ACPI device drivers to stop setting
acpi_device_name() for struct acpi_device objects manipulated
by them and use a string literal instead of it where applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10840483.nUPlyArG6x@rafael.j.wysocki
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Modify acpi_button_remove() to get the ACPI device object pointer
from button->adev instead of retrieving it with the help of the
ACPI_COMPANION() macro to reduce overhead slightly.
While at it, rename the struct acpi_device pointer variable in
acpi_button_remove() to adev.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13948466.uLZWGnKmhe@rafael.j.wysocki
Modify struct acpi_button to hold a struct device pointer instead
of a struct platform_device one to avoid unnecessary pointer
dereferences and use that pointer consistently for system wakeup
initialization, handling and cleanup.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1948258.tdWV9SEqCh@rafael.j.wysocki
Calling device_init_wakeup() after installing a notify handler in which
wakeup events are signaled may cause a wakeup event to be missed if the
device is probed right before a system suspend.
To avoid this, move the device_init_wakeup() call in acpi_button_probe()
before the notify handler installation and add a corresponding cleanup
to the error path.
Also carry out wakeup cleanup for the button in acpi_button_remove()
because after that point the notify handler will not run for it and
wakeup events coming from it will not be signaled.
Fixes: 0d51157dfa ("ACPI: button: Eliminate the driver notify callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12854922.O9o76ZdvQC@rafael.j.wysocki
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI button driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2461734.NG923GbCHz@rafael.j.wysocki
Adjust the event notification routines in the ACPI button driver to
take a struct acpi_button pointer as an argument istead of a struct
acpi_device one where applicable, which allows the use of
acpi_driver_data() to be limited and will facilitate subsequent
changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2260995.Icojqenx9y@rafael.j.wysocki
Make acpi_button_add() call input_free_device() when
input_register_device() fails as required according to the
documentation of the latter.
Fixes: 0d51157dfa ("ACPI: button: Eliminate the driver notify callback")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
[ rjw: Subject and changelog rewrite, Fixes: tag ]
Link: https://patch.msgid.link/20251006084706.971855-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems when the system is put to sleep pressing the ACPI power
button will cause the EC SCI to try to wake the system by a Notify(DEV, 0x2)
with an intention to wake the system up from suspend.
This behavior matches the ACPI specification in ACPI 6.4 section
4.8.3.1.1.2 which describes that the AML handler would generate a Notify()
with a code of 0x2 to indicate it was responsible for waking the system.
This currently doesn't work because acpi_button_add() only configured
`ACPI_DEVICE_NOTIFY` which means that device handler notifications
0x80 through 0xFF are handled.
To fix the wakeups on such systems, adjust the ACPI button handler to
use `ACPI_ALL_NOTIFY` which will handle all events 0x00 through 0x7F.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Richard Gong <Richard.Gong@amd.com>
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html?highlight=0x2#control-method-power-button
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Link: https://patch.msgid.link/20250303212719.4153485-1-superm1@kernel.org
[ rjw: Removed uneeded semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com>
Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace strcpy() with strscpy() in the ACPI button driver.
strcpy() has been deprecated because it is generally unsafe, so help to
eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240901191826.421488-1-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andorid can wakeup from various wakeup sources, but only several wakeup
sources can wake up screen with right events(POWER, WAKEUP) from input
device.
Regarding pressing acpi power button, it can resume system and
ACPI_BITMASK_WAKE_STATUS and ACPI_BITMASK_POWER_BUTTON_STATUS are set in
pm1a_sts, but kernel does not report any key event to user space during
resuming by default.
So, send wakeup key event to user space during resume from power button.
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI thermal driver cleanups and ACPI button drivers rework for
6.5-rc1:
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
* acpi-button:
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
Since the lid handling in acpi_button_notify() is special, introduce
acpi_lid_notify() specifically for handling lid notifications.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI button driver to install notify handlers or fixed
event handlers for the devices it binds to by itself, reduce the
indentation level in its notify handler routine and drop its
notify callback.
This will allow acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler() to be simplified going forward
and it will allow the driver to use different notify handlers for the
lid and for the power and sleep buttons.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
The LID0 device on the Nextbook Ares 8A tablet always reports lid
closed causing userspace to suspend the device as soon as booting
is complete.
Add a DMI quirk to disable the broken lid functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d5
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga 9 (14INTL5)'s ACPI _LID is bugged:
After hibernation the lid is initially reported as closed.
Once closing and then reopening the lid reports the lid as
open again. This leads to the conclusion that the initial
notification of the lid is missing but subsequent
notifications are correct.
In order fo the Linux LID code to handle this device properly
the lid_init_state must be set to ACPI_BUTTON_LID_INIT_OPEN.
Signed-off-by: Ulrich Huber <ulrich@huberulrich.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.
While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 78a5b53e9f ("Input: soc_button_array - work around DSDTs which
modify the irqflags") adds a workaround for DSDTs with a _LID method
which play tricks with the irqflags, assuming that the OS is using
an irq-type of IRQ_TYPE_LEVEL_LOW.
Now that this workaround is in place, we no longer need to disable the
lid functionality on the Acer SW5-012.
Fixes: 78a5b53e9f ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original intent of 84d3f6b764 was to delay evaluating lid state until
all drivers have been loaded, with input device being opened from userspace
serving as a signal for this condition. Let's ensure that state updates
happen even if userspace closed (or in the future inhibited) input device.
Note that if we go through suspend/resume cycle we assume the system has
been fully initialized even if LID input device has not been opened yet.
This has a side-effect of fixing access to input->users outside of
input->mutex protections by the way of eliminating said accesses and using
driver private flag.
Fixes: 84d3f6b764 ("ACPI / button: Delay acpi_lid_initialize_state() until first user space open")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Those were used to create files in /proc/acpi long ago
and were missed when that code was deleted.
Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86") fixes
the edge-triggered embedded-controller (WC) IRQ not being replayed after
resume when woken by opening the lid, which gets signaled by the EC.
This means that the lid_init_state=ACPI_BUTTON_LID_INIT_OPEN quirk for
the Asus T200TA is no longer necessary, the lid now works properly
without it, so drop the quirk.
Fixes: 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This makes it possible to use ACPI_BUTTON_HID_POWER in another driver.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Running evemu-record on the lid switch event shows that the lid reports
the first "close" but then never reports an "open". This causes systemd
to continuously re-suspend the laptop every 30s. Resetting the _LID to
"open" fixes the issue.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Acer Switch 10 SW5-032 _LID method is quite broken, it looks like this:
Method (_LID, 0, NotSerialized) // _LID: Lid Status
{
If ((STAS & One))
{
Local0 = One
PBCG |= 0x05000000
HMCG |= 0x05000000
}
Else
{
Local0 = Zero
PBCG &= 0xF0FFFFFF
HMCG &= 0xF0FFFFFF
}
^^PCI0.GFX0.CLID = Local0
Return (Local0)
}
The problem here is the accesses to the PBCG and HMCG, these are the
pinconf0 registers for the power, resp. the home button GPIO,
e.g. PBCG is declared as:
OperationRegion (PWBT, SystemMemory, 0xFED0E080, 0x10)
Field (PWBT, DWordAcc, NoLock, Preserve)
{
PBCG, 32,
PBV1, 32,
PBSA, 32,
PBV2, 32
}
Where 0xFED0E000 is the base address of the GPO2 device and 0x80 is
the offset for the pin used for the powerbutton.
The problem here is this line in _LID:
PBCG |= 0x05000000
This changes the trigger flags of the GPIO, changing when it generates
interrupts. Note it does not clear the original flags. Linux uses an
edge triggered interrupt on both positive and negative edges. This |=
adds the BYT_TRIG_LVL flag to this, so now it is turned into a level
interrupt which fires both when low and high, iow it simply always
fires leading to an interrupt storm, the tablet immediately waking up
from suspend again, etc.
There is nothing we can do to fix this, except for a DSDT override,
which the user needs to do manually. The only thing we can do is
never call _LID, which requires disabling the lid-switch functionality
altogether.
This commit adds a quirk for this, as no lid-switch function is better
then the interrupt storm. A user manually applying a DSDT override can
also override the quirk on the kernel cmdline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are no users of the acpi_lid_notifier_[un]register functions,
so lets remove them.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Asus T200TA lid has some weird behavior where _LID keeps reporting
closed after every second openening of the lid. Causing immediate
re-suspend after opening every other open.
I've looked at the AML code but it involves talking to the EC and we
have no idea what the EC is doing. Setting lid_init_state to
ACPI_BUTTON_LID_INIT_OPEN fixes the unwanted behavior, so this commit
adds a DMI based quirk to use ACPI_BUTTON_LID_INIT_OPEN on the T200TA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Medion Akoya E2215T's ACPI _LID implementation is quite broken:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN.
This commit adds a DMI quirk for this.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3540c32a9a ("ACPI / button: Add quirks for initial lid state
notification") added 3 different modes to the LID handling code to deal
with various buggy implementations.
Until now users which need one of the 2 non-default modes to get their
HW to work have to pass a kernel commandline option for this.
E.g. https://bugzilla.kernel.org/show_bug.cgi?id=106151 was closed with a
note that the user has to add "button.lid_init_state=open" to the kernel
commandline to get the LID code to not cause undesirable suspends on his
Samsung N210 Plus.
This commit modifies the existing lid_blacklst DMI table so that it can
be used not only to completely disable the LID code on devices where
the ACPI tables are broken beyond repair, but also to select one of the 2
non default LID handling modes on devices where this is necessary.
This will allow us to add quirks to make the LID work OOTB on broken
devices. Getting this working OOTB is esp. important because the typical
breakage is false LID closed reporting, causing undesirable suspends which
basically make the system unusable.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new "disabled" value for the lid_init_state module option, which can
be used to disable LID support on devices where it is completely broken.
Sometimes devices seem to spontaneously suspend and the cause for this is
not clear. The LID switch is known to be one possible cause for this,
this commit allows easily disabling the LID switch for testing if it
is the cause.
For example some devices which do not even have a lid, still have a LID
device in their ACPI tables, pointing to a floating GPIO.
This is not really related to the initial LID state, but re-using the
existing option keeps things simple and it will make it much easier to
add DMI quirks which can either disable the LID completely or set another
non-default lid_init_state value, both of which are necessary on some
devices.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the weird strncmp() calls in param_set_lid_init_state(),
which look to me like they will also accept things like "opennnn"
to use sysfs_match_string instead.
Also rewrite param_get_lid_init_state() using the new lid_init_state_str
array. Instead of doing a straightforward one line replacement, e.g. :
return sprintf(buffer, lid_init_state_str[lid_init_state]);
print all possible values, putting [] around the selected value, so
that users can easily find out what the possible values are.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit dfa46c50f6 ("ACPI / button: Fix an issue in
button.lid_init_state=ignore mode"), the lid device is considered to be
not compliant to SW_LID if the Lid state is unchanged when updating it.
This is not wrong, but we overlooked the resume case, where Lid state is
updated unconditionally in the button driver .resume() callback. And this
results in warning message "ACPI: button: The lid device is not compliant
to SW_LID." after resume, if the machine is suspended with Lid opened and
then resumed with Lid opened.
Fix this by flushing the cached lid state before updating the Lid device
in .resume() callback.
Fixes: dfa46c50f6 ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode")
Reported-and-tested-by: Zhao Lijian <lijian.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a build warning in the ACPI button driver when CONFIG_PROC_FS
is not enabled by marking the unused function as __maybe_unused.
../drivers/acpi/button.c:252:12: warning: 'acpi_button_state_seq_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because acpi_lid_initialize_state() is called on every system
resume and it triggers acpi_lid_notify_state() which invokes
acpi_pm_wakeup_event() for the lid device, the lid's wakeup count is
incremented even if the lid was not the source of the event that woke up
the system. That behavior confuses user space deamons using
wakeup_count to identify the potential system wakeup source. To avoid
the confusion, only trigger acpi_pm_wakeup_event() in the
acpi_button_notify() path and don't do that in the
acpi_lid_initialize_state() path.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modules such as nouveau.ko and i915.ko have a link time dependency on
acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
the button.ko module that provides it is only loadable when booted in
ACPI mode. However, the ACPI button driver can be built into the core
kernel as well, in which case the dependency can always be satisfied,
and the dependent modules can be loaded regardless of whether the
system was booted in ACPI mode or not.
So let's fix this asymmetry by making the ACPI button driver loadable
as a module even if not booted in ACPI mode, so it can provide the
acpi_lid_open() symbol in the same way as when built into the kernel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ rjw: Minor adjustments of comments, whitespace and names. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The GP-electronic T701 tablet does not have a LID switch, but it
does define a LID device in its DSDT. The _LID method points to
the "\\_SB.GPO2" pin 0x18 GPIO with a pull setting of "PullDefault",
which leaves the pin floating.
This causes the ACPI button driver to cause spurious LID closed events,
causing the device to suspend while the user is using it. There is
nothing the ACPI button driver (or the gpio code) can do to fix this,
so the only solution is to add a DMI based blacklist and ignore the LID
device on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki