Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
Merge Rust support for cpufreq and OPP, a new Rust-based cpufreq-dt
driver, an SCMI cpufreq driver cleanup, and an ACPI cpufreq driver
regression fix:
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
* pm-cpufreq:
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
commit 0834667545 ("cpufreq: ACPI: Fix max-frequency computation")
modified get_max_boost_ratio() to return the nominal_freq advertised
in the _CPC object. This was for the purposes of computing the maximum
frequency. The frequencies advertised in _CPC objects are in
MHz. However, cpufreq expects the frequency to be in KHz. Since the
nominal_freq returned by get_max_boost_ratio() was not in KHz but
instead in MHz,the cpuinfo_max_frequency that was computed using this
nominal_freq was incorrect and an invalid value which resulted in
cpufreq reporting the P0 frequency as the cpuinfo_max_freq.
Fix this by converting the nominal_freq to KHz before returning the
same from get_max_boost_ratio().
Reported-by: Manu Bretelle <chantr4@gmail.com>
Closes: https://lore.kernel.org/lkml/aDaB63tDvbdcV0cg@HQ-GR2X1W2P57/
Fixes: 0834667545 ("cpufreq: ACPI: Fix max-frequency computation")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+
Link: https://patch.msgid.link/20250529085143.709-1-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian).
- Fix typos in energy model documentation and example driver code (Moon
Hee Lee, Atul Kumar Pant).
- Rearrange the energy model management code and add a new function for
adjusting a CPU energy model after adjusting the capacity of the
given CPU to it (Rafael Wysocki).
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- Switch OPP to use kmemdup_array() (Zhang Enpei).
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
=dIqJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
- Fix two ACPICA SLAB cache leaks (Seunghun Han).
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification and
the code (Zaid Alali).
- Fix typo in comments for SRAT structures (Adam Lackorzynski).
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre).
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin).
- Add support for printing AML arguments when the ACPICA debug level is
ACPI_LV_TRACE_POINT (Mario Limonciello).
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla).
- Apply pack(1) to union aml_resource (Tamir Duberstein).
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk).
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman).
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck).
- Add definitions for RIMT to ACPICA (Sunil V L).
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King).
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck).
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem).
- Rename structure and field names of the RAS2 table in actbl2.h (Shiju
Jose).
- Fix up whitespace in acpica/utcache.c (Zhe Qiao).
- Avoid sequence overread in a call to strncmp() in ap_get_table_length()
and replace strncpy() with memcpy() in ACPICA in some places (Ahmed
Salem).
- Update copyright year in all ACPICA files (Saket Dumbre).
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook).
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil Keshavamurthy).
- Remove an (explicitly) unused header file include from the VIOT ACPI
table parser file (Andy Shevchenko).
- Improve logging around acpi_initialize_tables() (Bartosz Szczepanek).
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui).
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich).
- Simplify PCC shared memory region handling (Sudeep Holla).
- Rework and extend functions for reading CPPC register values and for
updating CPPC registers (Lifeng Zheng).
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng).
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into a
const pointer (Pei Xiao).
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao).
- Make the ACPI battery driver report the current as a negative number
to the power supply framework when the battery is discharging as
documented (Peter Marheine).
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[] list
to prevent spurious wakeups from suspend-to-idle (Werner Sembach).
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla, Jon
Hunter).
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali).
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai).
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael Wysocki).
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti).
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus).
- Fail the ACPI bus registration if acpi_kobj registration fails (Armin
Wolf).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0rlUSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16GUH/jtsD33u0tSopncGA+MYQO/rd3MA1sW0
2W9NACvdPDtoOpDiKLa3ptw6FaicJMrPvghZ6LMZ1Wjt3JKqjGZLtj5zzZcCaCxt
34UOwr1V4FUDNQ7mfXRMRdwDnGj5UCaBLV80fekwr8gYhfEWM5F9MpeRuFR4QOAf
HGvmtI8NCAaYn2utHSvP/XkH2+C257k5lbdt1PMnQg7E7iQBoz3Nn39EuQ2MrkFN
1YEZzBR2wZkfQRTf1ZeK6SFKixNKCtDAJj7YcnKhwafj5YKvynr8EnuMDNc9B4Xh
dFGj9P/Jkxyol7sJqC+CjdyhDCY24cSBbk/+naCsInD0taSdK/FJW+w=
=/Ek0
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant part of these changes is an ACPICA update
covering two upstream ACPICA releases, 20241212 and 20250404, that
have not been included into the kernel code base yet.
Among other things, it adds definitions needed to address GCC 15's
-Wunterminated-string-initialization warnings, adds support for three
new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
DMAR), and fixes some issues.
On top of the above, there is a new parser for the MRRM table, more
changes related to GCC 15's -Wunterminated-string-initialization
warnings, a CPPC library update including functions related to
autonomous CPU performance state selection, a couple of new quirks,
some assorted fixes and some code cleanups.
Specifics:
- Fix two ACPICA SLAB cache leaks (Seunghun Han)
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification
and the code (Zaid Alali)
- Fix typo in comments for SRAT structures (Adam Lackorzynski)
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre)
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)
- Add support for printing AML arguments when the ACPICA debug level
is ACPI_LV_TRACE_POINT (Mario Limonciello)
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla)
- Apply pack(1) to union aml_resource (Tamir Duberstein)
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk)
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman)
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck)
- Add definitions for RIMT to ACPICA (Sunil V L)
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King)
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck)
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)
- Rename structure and field names of the RAS2 table in actbl2.h
(Shiju Jose)
- Fix up whitespace in acpica/utcache.c (Zhe Qiao)
- Avoid sequence overread in a call to strncmp() in
ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
in some places (Ahmed Salem)
- Update copyright year in all ACPICA files (Saket Dumbre)
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook)
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil
Keshavamurthy)
- Remove an (explicitly) unused header file include from the VIOT
ACPI table parser file (Andy Shevchenko)
- Improve logging around acpi_initialize_tables() (Bartosz
Szczepanek)
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui)
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich)
- Simplify PCC shared memory region handling (Sudeep Holla)
- Rework and extend functions for reading CPPC register values and
for updating CPPC registers (Lifeng Zheng)
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng)
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
a const pointer (Pei Xiao)
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao)
- Make the ACPI battery driver report the current as a negative
number to the power supply framework when the battery is
discharging as documented (Peter Marheine)
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
list to prevent spurious wakeups from suspend-to-idle (Werner
Sembach)
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
Jon Hunter)
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali)
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai)
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael
Wysocki)
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti)
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus)
- Fail the ACPI bus registration if acpi_kobj registration fails
(Armin Wolf)"
* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI: MRRM: Fix default max memory region
ACPI: bus: Bail out if acpi_kobj registration fails
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
...
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
Merge ACPI processor driver updates and ACPI CPPC library updates for
6.16-rc1:
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui).
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich).
- Simplify PCC shared memory region handling (Sudeep Holla).
- Rework and extend functions for reading CPPC register values and for
updating CPPC registers (Lifeng Zheng).
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng).
* acpi-processor:
ACPI: processor: idle: Remove redundant pr->power.count assignment
ACPI: processor: idle: Set pr->flags.power unconditionally
ACPI: processor: idle: Remove obsolete comment
* acpi-cppc:
ACPI: CPPC: Add three functions related to autonomous selection
ACPI: CPPC: Modify cppc_get_auto_sel_caps() to cppc_get_auto_sel()
ACPI: CPPC: Refactor register value get and set ABIs
ACPI: CPPC: Add cppc_set_reg_val()
ACPI: CPPC: Extract cppc_get_reg_val_in_pcc()
ACPI: CPPC: Rename cppc_get_perf() to cppc_get_reg_val()
ACPI: CPPC: Optimize cppc_get_perf()
ACPI: CPPC: Add IS_OPTIONAL_CPC_REG macro to judge if a cpc_reg is optional
ACPI: CPPC: Simplify PCC shared memory region handling
ACPI: PCC: Simplify PCC shared memory region handling
- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton).
-----BEGIN PGP SIGNATURE-----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=Zx0u
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM CPUFreq updates for 6.16 from Viresh Kumar:
"- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton)."
* tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (24 commits)
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
rust: devres: require a bound device
rust: pci: move iomap_region() to impl Device<Bound>
rust: device: implement Bound device context
rust: pci: preserve device context in AsRef
...
In store_scaling_setspeed(), sscanf is still used to read to sysfs.
Newer kstrtox provide more features including overflow protection,
better errorhandling and allows for other systems of numeration. It
is therefore better to update sscanf() to kstrtouint().
Signed-off-by: Bowen Yu <yubowen8@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250519070938.931396-1-yubowen8@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Setting the length of str_governor with a magic number could cause
overflow when max length increases, it is better to use the defined
macro in this case.
Signed-off-by: Bowen Yu <yubowen8@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250519070908.930879-1-yubowen8@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, all SCMI devices with performance domains attempt to register
a cpufreq driver, even if their performance domains aren't used to
control the CPUs. The cpufreq framework only supports registering a
single driver, so only the first device will succeed. And if that device
isn't used for the CPUs, then cpufreq will scale the wrong domains.
To avoid this, return early from scmi_cpufreq_probe() if the probing
SCMI device isn't referenced by the CPU device phandles.
This keeps the existing assumption that all CPUs are controlled by a
single SCMI device.
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce a Rust-based implementation of the cpufreq-dt driver, covering
most of the functionality provided by the existing C version. Some
features, such as retrieving platform data from `cpufreq-dt-platdev.c`,
are still pending.
The driver has been tested with QEMU, and frequency scaling works as
expected.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix an error caught with -Werror in amd-pstate-ut.
-----BEGIN PGP SIGNATURE-----
iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmgmSekaHG1hcmlvLmxp
bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnYs7BAA0lYBgiko019KdK429T9V
QcQ18Q0+u3+OOaWZFJJVghDhNmICVH6CTdvPTrOVhwD4C8xcmcY5OjgGcp5Fgwsr
Nx6tosRY65E0x7wZSINYzAH8Ri2xf66kzGmt19kw/+FtkseXRRR1ukXEbBEaN7nj
6ro1iEWM0ANpKX3wclG6a0MQ+yTpE1+A8oQdANikTiEWZ7PwbVmV2gV1XQtrQ87k
GZ6+mOLDdBXbPpkgW6w6hSecOsYQQdcdQBWX2pEqB8yG2iP3tByGF0pe/ORhH1DR
XnFM8K3K8wwqnecogFc1QbZrfnx3/h9OoigIsi0JR0vFx7C88aBdRv6UAMLkniWN
gLNsTEsy1OUIkY7Dp2wJdJUJtWl8+k7U9kCFz1GMzt6aGq3s9J2zt9Q/5HxOMZhJ
BmobFR5dLLLERRCmVK33QkMw4QvQs0zyeWxdeJeIi9D0DcvI6cZI4mH2YB878esq
nNW00s4yZpXftekgsA5e4TpHVgYdZ/sYR1cTJYuGPWH6yr2CAqXKqTItjiQq8T4r
bgMxWo5PceyPgPBUn5FO36LPFemfsQ7DXPKS6KbW8LzcfbVCZSfL561dg/La0+e2
ZKJFBvsU6LgFATf8YBQxTV/Kr7/ihYx3DbtB4mEWu9/piYBHlBsmYmofparFPSpK
QJBmh4GpDj54r27esKeJuWk=
=IUvq
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.16-2025-05-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver fix for 6.16 (5/15/25) from Mario
Liminciello:
"Fix an error caught with -Werror in amd-pstate-ut."
* tag 'amd-pstate-v6.16-2025-05-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
Lockdep reports a possible circular locking dependency [1] when
cpu_hotplug_lock is acquired inside store_local_boost(), after
policy->rwsem has already been taken by store().
However, the boost update is strictly per-policy and does not
access shared state or iterate over all policies.
Since policy->rwsem is already held, this is enough to serialize
against concurrent topology changes for the current policy.
Remove the cpus_read_lock() to resolve the lockdep warning and
avoid unnecessary locking.
[1]
======================================================
WARNING: possible circular locking dependency detected
6.15.0-rc6-debug-gb01fc4eca73c #1 Not tainted
------------------------------------------------------
power-profiles-/588 is trying to acquire lock:
ffffffffb3a7d910 (cpu_hotplug_lock){++++}-{0:0}, at: store_local_boost+0x56/0xd0
but task is already holding lock:
ffff8b6e5a12c380 (&policy->rwsem){++++}-{4:4}, at: store+0x37/0x90
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&policy->rwsem){++++}-{4:4}:
down_write+0x29/0xb0
cpufreq_online+0x7e8/0xa40
cpufreq_add_dev+0x82/0xa0
subsys_interface_register+0x148/0x160
cpufreq_register_driver+0x15d/0x260
amd_pstate_register_driver+0x36/0x90
amd_pstate_init+0x1e7/0x270
do_one_initcall+0x68/0x2b0
kernel_init_freeable+0x231/0x270
kernel_init+0x15/0x130
ret_from_fork+0x2c/0x50
ret_from_fork_asm+0x11/0x20
-> #1 (subsys mutex#3){+.+.}-{4:4}:
__mutex_lock+0xc2/0x930
subsys_interface_register+0x7f/0x160
cpufreq_register_driver+0x15d/0x260
amd_pstate_register_driver+0x36/0x90
amd_pstate_init+0x1e7/0x270
do_one_initcall+0x68/0x2b0
kernel_init_freeable+0x231/0x270
kernel_init+0x15/0x130
ret_from_fork+0x2c/0x50
ret_from_fork_asm+0x11/0x20
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x10ed/0x1850
lock_acquire.part.0+0x69/0x1b0
cpus_read_lock+0x2a/0xc0
store_local_boost+0x56/0xd0
store+0x50/0x90
kernfs_fop_write_iter+0x132/0x200
vfs_write+0x2b3/0x590
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x56/0x5e
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://patch.msgid.link/20250513015726.1497-1-ImanDevel@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/cpufreq/amd-pstate-ut.c:262:6: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
262 | if (ret)
| ^~~
ret is declared at the top of the function and in the for loop so the
initialization of ret is local to the loop. Remove the declaration in
the for loop so that ret is always used initialized.
Fixes: d26d16438b ("amd-pstate-ut: Reset amd-pstate driver mode after running selftests")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505072226.g2QclhaR-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250512-amd-pstate-ut-uninit-ret-v1-1-fcb4104f502e@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
On some hybrid platforms some efficient CPUs (E-cores) are not connected
to the L3 cache, but there are no other differences between them and the
other E-cores that use L3. In that case, it is generally more efficient
to run "light" workloads on the E-cores that do not use L3 and allow all
of the cores using L3, including P-cores, to go into idle states.
For this reason, slightly increase the cost for all CPUs sharing the L3
cache to make EAS prefer CPUs that do not use it to the other CPUs of
the same type (if any).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2032776.usQuhbGJ8B@rjwysocki.net
Modify intel_pstate to register EM perf domains for CPUs on hybrid
platforms without SMT which causes EAS to be enabled on them when
schedutil is used as the cpufreq governor (which requires intel_pstate
to operate in the passive mode).
This change is targeting platforms (for example, Lunar Lake) where the
"little" CPUs (E-cores) are always more energy-efficient than the "big"
or "performance" CPUs (P-cores) when run at the same HWP performance
level, so it is sufficient to tell EAS that E-cores are always preferred
(so long as there is enough spare capacity on one of them to run the
given task). However, migrating tasks between CPUs of the same type
too often is not desirable because it may hurt both performance and
energy efficiency due to leaving warm caches behind.
For this reason, register a separate perf domain for each CPU and choose
the cost values for them so that the cost mostly depends on the CPU type,
but there is also a small component of it depending on the performance
level (utilization) which helps to balance the load between CPUs of the
same type.
The cost component related to the CPU type is computed with the help of
the observation that the IPC metric value for a given CPU is inversely
proportional to its performance-to-frequency scaling factor and the cost
of running code on it can be assumed to be roughly proportional to that
IPC ratio (in principle, the higher the IPC ratio, the more resources
are utilized when running at a given frequency, so the cost should be
higher).
For all CPUs that are online at the system initialization time, EM perf
domains are registered when the driver starts up, after asymmetric
capacity support has been enabled. For the CPUs that become online
later, EM perf domains are registered after setting the asymmetric
capacity for them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/6057101.MhkbZ0Pkbq@rjwysocki.net
Policy locking was added to cpufreq_policy_is_good_for_eas() by commit
4854649b1f ("cpufreq/sched: Move cpufreq-specific EAS checks to
cpufreq") to address a theoretical race condition, but it turned out to
introduce a circular locking dependency between the policy rwsem and
sched_domains_mutex via cpuset_mutex. This leads to a board lockup on
OdroidN2 that is based on the ARM64 Amlogic Meson SoC.
Drop the policy locking from cpufreq_policy_is_good_for_eas() to address
this issue.
Fixes: 4854649b1f ("cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq")
Closes: https://lore.kernel.org/linux-pm/1bf3df62-0641-459f-99fc-fd511e564b84@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2806514.mvXUDI8C0e@rjwysocki.net
This reduces log-msgs during boot from many pages to ~10 occurrences. I
didn't investigate why it wasn't just 1, maybe its a low-level service to
other modules, re-probed by each of them ?
Link: https://lkml.kernel.org/r/20250325235156.663269-4-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for a new feature on some BIOS that allows setting
"lowest CPU minimum frequency".
Fix the amd-pstate-ut unit tests to restore system settings when done.
-----BEGIN PGP SIGNATURE-----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=lBoU
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.16-2025-05-08' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.16 (5/8/25) from Mario Limonciello:
- Add support for a new feature on some BIOS that allows setting
"lowest CPU minimum frequency".
- Fix the amd-pstate-ut unit tests to restore system settings when
done.
* tag 'amd-pstate-v6.16-2025-05-08' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
amd-pstate-ut: Reset amd-pstate driver mode after running selftests
cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option
cpufreq/amd-pstate: Add offline, online and suspend callbacks for amd_pstate_driver
cpufreq/amd-pstate: Move max_perf limiting in amd_pstate_update
Intel hybrid processors have CPUs of different capacity. Populate the
interface /sys/devices/system/cpu/cpuN/cpu_capacity.
This interface uses the per-CPU variable `cpu_scale`. On x86 this
variable has no other use besides feeding the sysfs entries. Initialize
it when setting CPU capacity for the scheduler and scale-invariant code.
Feed it with arch_scale_cpu_capacity() as it gives capacity normalized
to the interval [0, SCHED_CAPACITY_SCALE].
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Doing cpufreq-specific EAS checks that require accessing policy
internals directly from sched_is_eas_possible() is a bit unfortunate,
so introduce cpufreq_ready_for_eas() in cpufreq, move those checks
into that new function and make sched_is_eas_possible() call it.
While at it, address a possible race between the EAS governor check
and governor change by doing the former under the policy rwsem.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/2317800.iZASKD2KPV@rjwysocki.net
In amd-pstate-ut, one of the basic test is to switch between all
possible mode combinations. After running this test the mode of the
amd-pstate driver is active mode. Store and reset the mode to its original
state.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250430064206.7402-1-swapnil.sapkal@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
Modify cppc_get_auto_sel_caps() to cppc_get_auto_sel(). Using a
cppc_perf_caps to carry the value is unnecessary.
Add a check to ensure the pointer 'enable' is not null.
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250411093855.982491-8-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Initialize lower frequency limit to the "Requested CPU Min frequency"
BIOS option (if it is set) value as part of the driver->init()
callback. The BIOS specified value is passed by the PMFW as min_perf in
CPPC_REQ MSR. To ensure that we don't mistake a stale min_perf value in
CPPC_REQ value as the "Requested CPU Min frequency" during a kexec wakeup,
reset the CPPC_REQ.min_perf value back to the BIOS specified one in the
offline, exit and suspend callbacks.
amd_pstate_target() and amd_pstate_epp_update_limit() which are invoked
as part of the resume() and online() callbacks will take care of restoring
the CPPC_REQ back to the correct values.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250428071623.4309-1-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Rename and use the existing amd_pstate_epp callbacks for amd_pstate driver
as well. Remove the debug print in online callback while at it.
These callbacks will be needed to support the "Requested CPU Min Frequency"
BIOS option.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20250428062520.4997-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Commit 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
If the global boost flag is enabled and policy boost flag is disabled, a
call to `cpufreq_boost_trigger_state(true)` must enable the policy's
boost state.
The current code misses that because of an optimization. Fix it.
Suggested-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/852ff11c589e6300730d207baac195b2d9d8b95f.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the global boost flag was enabled and policy boost flag was disabled
before a suspend resume cycle, cpufreq_online() will enable the policy
boost flag on resume.
While it is important for the policy boost flag to mirror the global
boost flag when a policy is first created, it should be avoided when the
policy is reinitialized (for example after a suspend resume cycle).
Though, if the global boost flag is disabled at this point of time, we
want to make sure policy boost flag is disabled too.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/de5c72a0af101049204305c73cd30eb3a3e7b4a0.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During CPU hotunplug events (such as those occurring during
suspend/resume cycles), platform firmware may modify the CPU boost
state.
If boost was disabled prior to CPU removal, it correctly remains
disabled upon re-plug. However, if firmware re-enables boost while the
CPU is offline, the CPU may return with boost enabled—even if it was
originally disabled—once it is hotplugged back in. This leads to
inconsistent behavior and violates user or kernel policy expectations.
To maintain consistency, ensure the boost state is re-synchronized with
the kernel policy when a CPU is hotplugged back in.
Note: This re-synchronization is not necessary during the initial call
to ->init() for a CPU, as the cpufreq core handles it via
cpufreq_online(). At that point, acpi_cpufreq_driver.boost_enabled is
initialized to the value returned by boost_state(0).
Fixes: 2b16c63183 ("cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()")
Reported-by: Nicholas Chin <nic.c3.14@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220013
Tested-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9c7de55fb06015c1b77e7dafd564b659838864e0.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix possible out-of-bound / null-ptr-deref in drivers (Andre Przywara
and Henry Martin).
- Fix Kconfig issues with compile-test (Johan Hovold and Krzysztof
Kozlowski).
- Fix invalid return value in .get() (Marc Zyngier).
- Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo).
-----BEGIN PGP SIGNATURE-----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=PSnc
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-fixes-6.15-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq fixes for 6.15-rc from Viresh Kumar:
"- Fix possible out-of-bound / null-ptr-deref in drivers (Andre Przywara
and Henry Martin).
- Fix Kconfig issues with compile-test (Johan Hovold and Krzysztof
Kozlowski).
- Fix invalid return value in .get() (Marc Zyngier).
- Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)."
* tag 'cpufreq-arm-fixes-6.15-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: fix compile-test defaults
cpufreq: cppc: Fix invalid return value in .get() callback
cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate()
cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate()
cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate()
cpufreq: Do not enable by default during compile testing
cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist
cpufreq: sun50i: prevent out-of-bounds access
Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor.
-----BEGIN PGP SIGNATURE-----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=IGEy
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 1517176906 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
Commit 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.
This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:
cpufreq: Unable to obtain ARMCLK: -2
Commit d4f610a9ba ("cpufreq: Do not enable by default during compile
testing") recently fixed most of the default values, but two entries
were missed and two could use a more specific default condition.
Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.
Fixes: 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Cc: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A subset of AMD systems supporting Preferred Core rankings can have
their rankings changed dynamically at runtime. Update the
"sg->asym_prefer_cpu" across the local hierarchy of CPU when the
preferred core ranking changes.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250409053446.23367-4-kprateek.nayak@amd.com
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Ingo Molnar