Now that sec-i2c doesn't match device type by pointer casting anymore,
we can switch the device type from unsigned long to int easily.
This saves a few bytes in struct sec_pmic_dev due to member alignment.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-18-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, RTC, clock outputs, and additional GPIOs interfaces.
Contrary to existing Samsung S2M series PMICs supported, communication
is not via I2C, but via the Samsung ACPM firmware.
This commit adds the core driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-9-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
sec_irq_init() is an internal API for the core driver, and doesn't
belong into the public header.
Due to an upcoming split of the driver into a core and i2c driver,
we'll also be adding more internal APIs, which again shouldn't be in
the public header.
Move it into a new internal include.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-7-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
sec_irq_resume() was removed in commit 6445b84abf ("mfd: Add s2mps11
irq driver") and sec_irq_exit() in commit 3dc6f4aaaf ("mfd: sec: Use
devm_mfd_add_devices and devm_regmap_add_irq_chip") while the
prototypes were left. They should be removed.
Do so.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-4-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The "id" member of the bcm590xx struct is unused and will be confusing
once we add an actual PMU ID storage value. Drop it; a replacement
will be introduced in a future commit.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250316-bcm59054-v7-4-4281126be1b8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: automatic clean up on removal, support of
multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091426.22258-2-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
Instead of filling in the regulator description programatically,
store the data in a struct. This will make it a bit nicer to
introduce support for other BCM590xx chips besides the BCM59056.
To do this, add a new struct type, bcm590xx_reg_data, to store
all of the necessary information. Drop the old IS_LDO, IS_GPLDO...
macros in favor of the "type" field in this struct. Adapt the
old bcm590xx_reg struct to the new types.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-6-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM590xx PMUs have two I2C registers for reading the PMU ID
and revision. The revision is useful for subdevice drivers, since
different revisions may have slight differences in behavior (for
example - BCM59054 has different regulator configurations for
revision A0 and A1).
Check the PMU ID register and make sure it matches the DT compatible.
Fetch the digital and analog revision from the PMUREV register
so that it can be used in subdevice drivers.
Also add some known revision values to bcm590xx.h, for convenience
when writing subdevice drivers.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-4-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM59054 is another chip from the BCM590xx line of PMUs, commonly
used on devices with the BCM21664/BCM23550 chipsets.
Prepare the BCM590xx driver for supporting other devices by adding the
PMUID register values for supported chip types and store them in the
MFD data struct as "pmu_id". (These will be checked against the actual
PMUID register values in a later commit.)
Then, add a DT compatible for the BCM59054, and provide the PMU ID as
OF match data.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-3-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for STM32MP25 SoC.
A new hardware configuration register (HWCFGR2) has been added, to gather
number of capture/compare channels, autonomous mode and input capture
capability. The full feature set is implemented in LPTIM1/2/3/4. LPTIM5
supports a smaller set of features. This can now be read from HWCFGR
registers.
Add new registers to the stm32-lptimer.h: CCMR1, CCR2, HWCFGR1/2 and VERR.
Update the stm32_lptimer data struct so signal the number of
capture/compare channels to the child devices.
Also Remove some unused bit masks (CMPOK_ARROK / CMPOKCF_ARROKCF).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250429125133.1574167-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ccc95ae33613648fdcba08915777d945412ac5c4.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/8680097dc083f191bea56d3ac7c6fe5c005644ec.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96802 PMIC looks from software point of view a lot like ROHM
BD96801 PMIC. Just with reduced number of voltage rails. Both PMICs
provide two physical IRQ lines referred as INTB and ERRB and contain
blocks implementing regulator controls and a weatchdog. Hence it makes
sense to use same MFD core for both PMICs.
Add support for ROHM BD96802 scalable companion PMIC to the BD96801
core driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/05957d194425a79a4f35f287695c3d9ca2ed1ae2.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't support
those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341 and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures
-----BEGIN PGP SIGNATURE-----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=QJeg
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
RTC_NUM_YEARS has never been used, the other defines are not used since
commit 34bbdc12d0 ("rtc: mt6359: Add RTC hardware range and add support
for start-year")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250303223637.1135362-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* Added devicetree bindings for backlight controllers on Apple's
DWI interface.
* Added a new driver (apple_dwi_bl) for these controllers found
on some Apple mobile devices.
* Added MAINTAINERS entries for the new driver.
* led_bl: Fixed a locking issue by holding the led_access lock
when calling led_sysfs_disable() during device removal to
prevent potential warnings.
* Removed unnecessary <linux/fb.h> includes from a bunch of
drivers.
* tdo24m: Removed redundant whitespace in Kconfig description.
* pcf50633-backlight: Removed the driver as the underlying
pcf50633 MFD and s3c24xx platform support were removed.
-----BEGIN PGP SIGNATURE-----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=+rL+
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Apple DWI Backlight:
- Added devicetree bindings for backlight controllers on Apple's DWI
interface.
- Added a new driver (apple_dwi_bl) for these controllers found on
some Apple mobile devices.
- Added MAINTAINERS entries for the new driver.
- led_bl: Fixed a locking issue by holding the led_access lock when
calling led_sysfs_disable() during device removal to prevent
potential warnings.
- Removed unnecessary <linux/fb.h> includes from a bunch of drivers.
- tdo24m: Removed redundant whitespace in Kconfig description.
- pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD
and s3c24xx platform support were removed.
* tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits)
backlight: pcf50633-backlight: Remove unused driver
backlight: tdo24m: Eliminate redundant whitespace
MAINTAINERS: Add entries for Apple DWI backlight controller
backlight: apple_dwi_bl: Add Apple DWI backlight driver
dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight
backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
backlight: wm831x_bl: Do not include <linux/fb.h>
backlight: vgg2432a4: Do not include <linux/fb.h>
backlight: tps65217_bl: Do not include <linux/fb.h>
backlight: max8925_bl: Do not include <linux/fb.h>
backlight: lv5207lp: Do not include <linux/fb.h>
backlight: locomolcd: Do not include <linux/fb.h>
backlight: hp680_bl: Do not include <linux/fb.h>
backlight: ep93xx_bl: Do not include <linux/fb.h>
backlight: da9052_bl: Do not include <linux/fb.h>
backlight: da903x_bl: Do not include <linux/fb.h>
backlight: bd6107_bl: Do not include <linux/fb.h>
backlight: as3711_bl: Do not include <linux/fb.h>
backlight: adp8870_bl: Do not include <linux/fb.h>
backlight: adp8860_bl: Do not include <linux/fb.h>
...
pcap_adc_sync() was added in 2009 by commit 13a09f93d2 ("mfd: add PCAP
driver") but has remained unused; the async version is still used.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306011027.257021-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
Remove needless 'return' in the following void APIs:
prcmu_early_init()
prcmu_system_reset()
prcmu_modem_reset()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250221-rmv_return-v1-15-cc8dff275827@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
With commit dcbb01fbb7 ("x86/pci: Remove old STA2x11 support"), the core
driver for STA2x11 is not needed and cannot be built anymore.
Remove the driver and its header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250303100055.372689-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
The header doesn't make use of any symbols declared in <linux/pwm.h>.
There are tree files that #include <mfd/lp3943.h>. Two of them
(i.e. drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c) also don't
use any and the third (drivers/pwm/pwm-lp3943.c) has an explicit include
of <linux/pwm.h> itself.
So drop the unused include. The intended side effect is that
drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c stop importing the
"PWM" module namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250212170403.36619-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
Utilise devm_*() managed resource helpers for freeing IRQs instead.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between 3 PMIC devices in
probe(). Add TPS65214 resource information. Update descriptions and
copyright information to reflect the driver supports 3 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-6-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between devices in
probe(). Add TPS65215 resource information. Update descriptions and
copyright information to reflect the driver supports 2 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-5-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for STM32MP25 SoC. Use newly introduced compatible, to handle
new features.
Identification and hardware configuration registers allow to read the
timer version and capabilities (counter width, number of channels...).
So, rework the probe to avoid touching ARR register by simply read the
counter width when available. This may avoid messing with a possibly
running timer.
Also add useful bit fields to stm32-timers header file.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by
Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC
clock device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-2-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Remove unused platform driver support for syscon.
- Allow syscon nodes to be registered without a "syscon" compatible string.
- Make `platform_data` pointer const in struct mfd_cell.
- Revert support for multiple AXP PMICs to avoid regressions.
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
- Store the result from fault_log() for use by other sub-components.
- Fix an invalid regmap-config max_register value.
- Add another Gemini Lake ISA bridge PCI device ID.
- Use devm_register_power_off_handler() to simplify code.
- Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
- Use MFD_CELL macros and remove unused code.
- Add support for AAEON UP board FPGA.
- Remove unused includes.
- Fix various typos and compatibility issues in multiple bindings.
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
- Convert several bindings to YAML schema.
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
- Fix rohm,bd71815 bindings by correcting resistor values and typos.
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon.
- Adjust the file entry for the qnap-mcu header in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=3HQm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
These macros are not used by the driver, and the structs are accounted
for with the addition of the linux/regmap.h file.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The content of the platform_data of a struct mfd_cell is simply passed on
to the platform_device_add_data() call in mfd_add_device() .
platform_device_add_data() already handles the data behind that pointer
as const and also uses kmemdup to create a copy of the data before
handing that copy over to the newly created platform-device,
so there is no reason to not extend this to struct mfd_cell, as the old
copy in the mfd_cell will be stale anyway.
This allows to pass structs gathered from of_device_get_match_data()
as platform-data to sub-devices - which is retrieved as const already.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd
hG8AoLrh8n5L08d6r5v1sII5To4KoZI7
=IX0/
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for consistency with
other places
- modify the behavior of the sysfs interface by no longer exporting lines that
are named inside the driver code or board files with the sysfs links bearing
the line names as this has for many years been largely unused due to the
prevalence of DT, ACPI and firmware nodes over board files and made the API
inconsistent
- for GPIO interrupt providers: free irqs that are still requested by users
when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested, released,
reconfigured) triggered from the kernel as well (until now we'd only do
this for changes triggered from user-space)
- to that end: modify the internal workings of the notification mechanism by
switching to an atomic notifier which allows us to send events from atomic
context
- also to that end store the debounce period in the GPIO descriptor struct
and not in the character device context struct
- while at it, also cover the corner-case of users introducing changes over
sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to user-space as it
can still request them as GPIOs
New drivers:
- add a driver for the GPIO functionality of the MFD Congatec Board Controller
- add a driver for the PolarFire GPIO controller
- add a driver supporting the GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones across
many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or entirely
remove the driver's remove() callback (grgpio, amdpt, menz127, max730x,
ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid some
line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the fwnode
on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the conversion to
remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this
deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in gpiolib-of
and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools
-----BEGIN PGP SIGNATURE-----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=ON7q
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Three new drivers, support for some new models in existing ones and
lots of various tweaks and improvements across the board (switching to
using recommended APIs, code shrink and simplification, etc.).
Also a new feature in the character device uAPI where we now notify
the user-space about changes triggered by in-kernel users as well, not
only when they were done by other user-space agents.
Summary:
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO
descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for
consistency with other places
- modify the behavior of the sysfs interface by no longer exporting
lines that are named inside the driver code or board files with the
sysfs links bearing the line names as this has for many years been
largely unused due to the prevalence of DT, ACPI and firmware nodes
over board files and made the API inconsistent
- for GPIO interrupt providers: free irqs that are still requested by
users when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested,
released, reconfigured) triggered from the kernel as well (until
now we'd only do this for changes triggered from user-space)
- to that end: modify the internal workings of the notification
mechanism by switching to an atomic notifier which allows us to
send events from atomic context
- also to that end store the debounce period in the GPIO descriptor
struct and not in the character device context struct
- while at it, also cover the corner-case of users introducing
changes over sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to
user-space as it can still request them as GPIOs
New drivers:
- GPIO part of the MFD Congatec Board Controller
- PolarFire GPIO controller
- GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones
across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or
entirely remove the driver's remove() callback (grgpio, amdpt,
menz127, max730x, ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid
some line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the
fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and
gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the
conversion to remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
this deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in
gpiolib-of and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to
gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools"
* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
gpio: tegra186: Allow to enable driver on Tegra234
gpio: grgpio: Add NULL check in grgpio_probe
tools: gpio: Fix several incorrect format specifiers
gpio: mpfs: add CoreGPIO support
gpio: rockchip: support new version GPIO
gpio: rockchip: change the GPIO version judgment logic
gpio: rockchip: explan the format of the GPIO version ID
gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
MAINTAINERS: add gpio driver to PolarFire entry
gpio: Get rid of GPIOF_ACTIVE_LOW
USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
leds: gpio: Avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
gpio: Use of_property_present() for non-boolean properties
gpio: mpfs: add polarfire soc gpio support
gpio: altera: Drop legacy-of-mm-gpiochip.h header
gpio: pcie-idio-24: Replace deprecated PCI functions
gpio: pci-idio-16: Replace deprecated PCI functions
...
RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.
Make it a member of the da9063 structure instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The MT6328 PMIC is commonly used with the MT6735 SoC. Add initial
support for this PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-5-y.oudjana@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Sumanth Gavini