Number of RVU PFs on CN20K silicon have increased to 96 from maximum
of 32 that were supported on earlier silicons. Every RVU PF and VF is
identified by HW using a 16bit PF_FUNC value. Due to the change in
Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed.
This patch handles the change by using helper functions(using silicon
check) to use PF,VF masks and shifts to support both new silicon CN20K,
OcteonTx series. These helper functions are used in different modules.
Also moved the NIX AF register offset macros to other files which
will be posted in coming patches.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- New Support
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for this
support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
- Updates
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmhBORsACgkQfBQHDyUj
g0fz8BAA1ULmArQnbsgi12tBgYW8h4YgwDZtweGpvd25nqStCfNu4L4IVc7MdITc
zWc1JeMvuv5X+A7OHGlq+he+nMm5VQPFzxjCN2nlvIONSKj4KxgHrP/HJChzIZhI
FOGwpwhmBFAFrrbeEOnChBqDal9BFBVAmTmr8dM+Z3/fIpQS7yj5f5Foy7Jy39GQ
eBzNRbzN8e1djVhyLUHOITvGhx1CtIoePZMUhyZcyjDxyFyyeoeLmN5ypeu3mebF
HWqDsW4ZJr1yEkEe9DrnDFY7qmBdLYOmjxDpINFjkV3+35qBKK/QNX8aZtTrk5lH
6LJxdjUXWuaPRcJo5joU0FxHrGChEp2+QDliqdreQyrebs+VZHJi06dR2sPm6mSe
oaRb/OhOaXhG/fH2U7skj5lR9o6SRv8J8c6SQ6/xtTHuNKun8saRSTL2RYkB+3BJ
4D9LoVLs8NP0Gc3LZIVXFyhLRW8OpHY+vqk4XASTgrTX6yjKrb7Lt/nNNfU/Z+/r
3yFcGTwFBa/YYZyXtCB3z5iFTTMjZB8SJwbcB80j6Y9vXv/u1tN20XdZN2jWEjWs
bjWt3nSSw3b+UYB8XPtXXRdhXfsuOEnVQR+JyoYNFjlgChmmkYDW7M40lkw1UUte
XzcZUV+gbZZWy6zpGyDRzEz23Eo4T5XXXo91bZ5zRDCJH4iIv2A=
=VxLP
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
Updates are across the usual driver subsystems with SoC specific drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups for a
few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus better
support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google, aspeed,
wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung
SoCs
-----BEGIN PGP SIGNATURE-----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=RhpA
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
-----BEGIN PGP SIGNATURE-----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=5fbP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u6x7
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the Exynos USB 3.2 DRD 4nm controller. It's used in
recent 4nm SoCs like Exynos2200 and Exynos2400.
This device consists of 3 underlying and independent phys: SEC link
control phy, Synopsys eUSB 2.0 and Synopsys USBDP/SS combophy. Unlike
older device designs, where the internal phy blocks were all IP of
Samsung, Synopsys phys are present. This means that the link controller
is now mapped differently to account for missing bits and registers.
The Synopsys phys also have separate register bases.
As there are non-SEC PHYs present now, it doesn't make much sense to
implement them in this driver. They are expected to be configured
by external drivers, so pass phandles to them. USBDRD3.2 link controller
set up is still required beforehand.
This commit adds the necessary changes for USB HS to work. USB SS and
DisplayPort are out of scope in this commit and will be introduced
in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504144527.1723980-11-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some additional register writes are required when hotplugging CPUs
on gs101, without these the system hangs when hotplugging.
Specifically a CPU_INFORM register needs to be programmed with
a hint value which is used by the EL3 firmware (el3mon) and the
pmu-intr-gen registers need to be programmed.
With this patch applied, and corresponding DT update CPU hotplug
now works as expected. e.g.
echo 0 > /sys/devices/system/cpu/cpu6/online
echo 1 > /sys/devices/system/cpu/cpu6/online
Note: to maintain compatibility with older DTs that didn't specify
pmu-intr-gen phandle only a warning is issued if the syscon can't
be obtained.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-5-9f64a2657316@linaro.org
[krzk: few blank line and white-space alignment fixes from checkpatch]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There are some sparse warnings in wifi, and it seems that
it's actually possible to annotate a function pointer with
__releases(), making the sparse warnings go away. In a way
that also serves as documentation that rcu_read_unlock()
must be called in the attach method, so add that annotation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423150811.456205-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement support for Exynos7870 USB DRD on top of the existing
exynos5-usbdrd driver.
Exynos7870 has a single USB 2.0 DRD PHY controller and no 3.0 PHYs. Thus,
it only supports the UTMI interface.
Moreover, the PMU register offset for enabling the PHY controller is
different for SoCs such as Exynos7870, where BIT(0) is for the 3.0 PHY and
BIT(1) is for the 2.0 PHY. The phy_isol function for Exynos7870 uses the
appropriate register offsets.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-3-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Client drivers might want a copy of the crashlog to stash into a
devcoredump blob. Since device memory management can be very variable,
the actual devcoredump implementation is left to client drivers. Pass
the raw crashlog buffer to the client callback so it can use it if
desired.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250202-rtkit-crashdump-v1-1-9d38615b4e12@asahilina.net
Signed-off-by: Sven Peter <sven@svenpeter.dev>
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to *_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7Y+QXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmbrw/9FVdo3+mo6EZne+Zsxc0+3N9G
bRwkgyCB8WSFy6MHD1TRyP9u8bFgFDitSxcUGuBW0l9t1le3IcsYwfbTEEZpUkU4
iasPoZoFKA3Akfr7tvQpIpSNh8MIBMFy7CfxWpsfiHlmwrIH6oT6HmlwWwFsbVxh
Fv8xA5SOE1KRHq0Aos23h7MizPsav/PYSh/4Ga5l6ZBlm40c16cE0i0M4RRUnoNY
FmUBe57HoumDd05ToFR9wrqMEVWbAJHV4xZpZwnfYUhwGrgbxUWI/1FIfwxtob12
OExPr9kiV8/f8Kfp3E3ul0R8q8XYaYZaT3R7nF5QOngLZCCpD5H9aWEcAihUryBh
Ol9Wao0Ku1JqLc776bjwf92ozFDtx0yUN/8LXmQgUu+e+MC3eAOrsls+U4731p+Y
V80mvBpqn8AbX7LOjJvmbOhK6Qnm0cHo2cs0afBSS5c9RBcCWuEy9d7n8dks6JX2
7H6ySDaKoEEK06V6VzEKdHQoRFkmw95w4n7Ei3OL0cxNLcT1ILGA1+O7PPw+6h4T
3UnSik6szZCBXFFaDsw4J53HZACVZWbkyrk5Dbsigte8lh6e2VI+qd9whd46nuCY
Sn4vJ399FJvXBuEIu+8yymGwn/NSpgd6ybpkwdDNJ+fItbes7DQhtxM6k74ANAhf
0irf1o4Yv0S5W+pXBAM=
=SpyF
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
-----BEGIN PGP SIGNATURE-----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=Wqwn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc05DAACgkQYKtH/8kJ
UidXZQ//b9NHOLIaYNBcxSFT5ibK1orcCpWcUQlzkwKRwz8kXMsXW41t3R/Ab1Wk
nJhQFwWL28sDtDTK13mdfSM4dnDuoqtjIk4/40LGyivla7m5LCPr775xFYJzfRPc
z0gZvabNp4syKC4l5FCFILOxeYE2cyDkzGMxlTg5ztUfF4AsFr3PrJq9wmvhfQo8
GRm6XSsAaq7cshEwYqJRtDfR3i6vzaqbbn54/HHBTpMZnhus2iZk92Q1gEekD2fi
UjySAmdOFCjCIPCxxrRMEPupHjT20DqJVK//m/kNCNAw4i4049o1Xu/KjoymPQNa
Wg/UjS5Lsne58dFI1Kmmdat9nqrVrd0ZXQd4mpERSJKYAGptO73PNofzFDvtuLYX
V3usgZIZJzk/L+amkVIeY/Ot8fPgiRgb2G5SIcWcIBqiUtwNyw3TOnxcswcml8JA
gzneVx4LryrRPrjJGTb1LqefwH4Rs48RpKUVDrHN7vxK3r3EKirqxQtTic7kdrJp
GbR0OdkfIcLF3k4uSMDSfKlIB7kcldGdJw8ZJY0Qn4yJr7Uss+N4jk6U8eqkW0AC
0LKGXk4ym9t8rFYnfck/toGDtXMFnjNFnY+SYq9F241Ux08l2stme14PG7Mu0tyY
dxEbV1FYkxy55LVYgW0hK/Y5+ogGusNfJICZSTen6NDGK38+x4I=
=yuqG
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmcrXIEACgkQ3bWEnRc2
JJ0ZRhAAiJKWaG8TS3E9Bpy1HtgMvtn5mXC+72EFCqFWn7oUmuAmL5ivO7XDKbcO
scAtdzkupgazD6h4lLwu7VQYEGRt/1+mTaQ1MfgnHlQiShLeJQ8tbkmv49MXGiH0
OKNMlKYfxVvTmyQYVYStM1WoH54ab3vn6iMZT1uiDAAkHniGE+uBgX92+Y+AjV9p
26rBct9aOHzfoEx339/mr3yElf6y74kuie2rpskJfCqT8dRqIw1glu6mFI8T2Bwp
BFjjSny7rAg37Q9gzhhg623TznXhNxFEpDKE/thsgc9LU6OiMSTuONjXvCuPhANe
OvAt8FTg691Op5Dkj+3e3AUp7cQ46BTQZdpLS7aEjjiT810zqsp0U+BL2ozyPgs8
9BHNRDlsctj+92emzi8XujivmpariYaeTvFY4h2MvaIUJnubaoxN90568fS2orgb
U/DykVczyau3VIUFft7DJ7VlPYz3pfbvutfEhKmRpF51HOlqSZyZXHOJByrIzMpt
MFQCbjHWAJlvQfIemv7ybAMpKFyCjWlFxsKnMFJU1V6bjYei89IYTIGqegH6Yy4d
hOLZJCM388T4RupGk3+Mbh3IlmZq5H33Pich1c1FC/EB2v0ni5qZunEIEaYXWMES
ddLAo+2eeVCi1HSiMYWzX+DFCR1d4WU3TDJPU+eemgE/1UcJuDY=
=xIlb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y17E
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.13
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
* tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Remove use of of_match_ptr() helper
firmware: ti_sci: add CPU latency constraint management
firmware: ti_sci: Introduce Power Management Ops
firmware: ti_sci: Add system suspend and resume call
firmware: ti_sci: Add support for querying the firmware caps
PM: QoS: Export dev_pm_qos_read_value
soc: ti: knav_qmss_queue: Drop redundant continue statement
soc: ti: knav_qmss_queue: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/20241106121708.rso5wvc7wbhfi6xk@maverick
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZyitDigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4h1wA/1xT
8kHN16gVzZ6JvjvzOeipCi2YPJ0LCPv4jpvEx4abAP9tFsyVYsQGAE0XS74p3GRT
r9NhhlV7dnpQmVO/SPClDQ==
=cgv/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GKpu
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/drivers
MediaTek soc driver updates for v6.13
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
* tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-svs: Call of_node_put(np) only once in svs_get_subsys_device()
soc: mediatek: mediatek-regulator-coupler: Support mt8188
soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration
soc: mediatek: mtk-cmdq: Move mask build and append to function
soc: mediatek: Add MediaTek DVFS Resource Collector (DVFSRC) driver
dt-bindings: soc: mediatek: Add DVFSRC bindings for MT8183 and MT8195
Link: https://lore.kernel.org/r/20241104112625.161365-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
-----BEGIN PGP SIGNATURE-----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=H31v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2qZ7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Implement necessary support for the LLCC control on the SAR1130P and
SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
shift and also require manual override for num_banks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-3-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce power management ops supported by the TISCI
Low Power Mode API [1].
1) TISCI_MSG_LPM_WAKE_REASON
Get which wake up source woke the SoC from Low Power Mode.
The wake up source IDs will be common for all K3 platforms.
2) TISCI_MSG_LPM_SET_DEVICE_CONSTRAINT
Set LPM constraint on behalf of a device. By setting a constraint, the
device ensures that it will not be powered off or reset in the selected
mode.
3) TISCI_MSG_LPM_SET_LATENCY_CONSTRAINT
Set LPM resume latency constraint. By setting a constraint, the host
ensures that the resume time from selected mode will be less than the
constraint value.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[g-vlaev@ti.com: LPM_WAKE_REASON and IO_ISOLATION support]
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
[a-kaur@ti.com: SET_DEVICE_CONSTRAINT support]
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
[vibhore@ti.com: SET_LATENCY_CONSTRAINT support]
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Akashdeep Kaur <a-kaur@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-4-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Introduce system suspend call that enables the ti_sci driver to support
low power mode when the user space issues a suspend to mem.
The following power management operations defined in the TISCI
Low Power Mode API [1] are implemented to support suspend and resume:
1) TISCI_MSG_PREPARE_SLEEP
Prepare the SOC for entering into a low power mode and
provide details to firmware about the state being entered.
2) TISCI_MSG_SET_IO_ISOLATION
Control the IO isolation for Low Power Mode.
Also, write a ti_sci_prepare_system_suspend call to be used in the driver
suspend handler to allow the system to identify the low power mode being
entered and if necessary, send TISCI_MSG_PREPARE_SLEEP with information
about the mode being entered.
Sysfw version >= 10.00.04 support LPM_DM_MANAGED capability [2], where
Device Mgr firmware now manages which low power mode is chosen. Going
forward, this is the default configuration supported for TI AM62 family
of devices. The state chosen by the DM can be influenced by sending
constraints using the new LPM constraint APIs.
In case the firmware does not support LPM_DM_MANAGED mode, the mode
selection logic can be extended as needed. If no suspend-to-RAM modes
are supported, return without taking any action.
We're using "pm_suspend_target_state" to map the kernel's target suspend
state to SysFW low power mode. Make sure this is available only when
CONFIG_SUSPEND is enabled.
Suspend has to be split into two parts, ti_sci_suspend() will send
the prepare sleep message to prepare suspend. ti_sci_suspend_noirq()
sets IO isolation which needs to be done as late as possible to avoid
any issues. On resume this has to be done as early as possible.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Co-developed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-3-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add support for SCPSYS power domains of MT6735. All non-CPU power domains
are added except for MD2 (C2K modem), which is left out due to issues
with powering it on.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241017085136.68053-3-y.oudjana@protonmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a
Hardware module used to collect all the requests from both software and the
various remote processors embedded into the SoC and decide about a minimum
operating voltage and a minimum DRAM frequency to fulfill those requests in
an effort to provide the best achievable performance per watt.
This hardware IP is capable of transparently performing direct register R/W
on all of the DVFSRC-controlled regulators and SoC bandwidth knobs.
This driver includes support for MT8183, MT8192 and MT8195.
Co-Developed-by: Dawei Chien <dawei.chien@mediatek.com>
[Angelo: Partial refactoring and cleanups]
Reviewed-by: Georgi Djakov <djakov@kerenl.org>
Link: https://lore.kernel.org/r/20240610085735.147134-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM related irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')
On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.
Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240903101510.3452734-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup of
the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART engine
that that chip seems to have. Hopefully it's in a better state now,
but hardware designers still seem to come up with more ways to make
broken UARTS 40+ years after this all should have finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUz1w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymAhwCcCw/6BX3aKGTyx7ZxeMRc/mjbSLIAoMUv6bGT
6H04ZvcSd63ZotAWeZsn
=PWB8
-----END PGP SIGNATURE-----
Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
Drop legacy acquire/release since we are using pinctrl for this now.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The following driver's should be instantiated by ep93xx syscon driver:
- reboot
- pinctrl
- clock
They all require access to DEVCFG register with a shared lock held, to
avoid conflict writing to swlocked parts of DEVCFG.
Provide common resources such as base, regmap and spinlock via auxiliary
bus framework.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.
For UART devices the S_GP_LENGTH is the RX word count.
The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c54
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
The maximum amount of DDR memory used by the Mediatek MT8188/MT8195 SCP
is increased, to handle new use cases. Handling of optional L1TCM memory
is made actually optional.
An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
Support for attaching to an running remote processor is added to the
Xilinx R5F.
An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the dependency
on a userspace implementation to detect when the battery monitor and USB
Type-C port manager becomes available. This is then integrated with the
Qualcomm remoteproc driver.
The Qualcomm PAS remoteproc driver gains support for attempting to bust
hwspinlocks held by the remote processor when it crashed/stopped.
The TI OMAP remoteproc driver is transitioned to use devres helpers for
various forms of allocations.
Parsing of memory-regions in the i.MX remoteproc driver is improved to
avoid a NULL pointer dereference if the phandle reference is empty.
of_node reference counting is corrected in the same.
-----BEGIN PGP SIGNATURE-----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=b4Do
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
Kuan-Wei Chiu has significantly reworked the min_heap library code and
has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally more
rational.
- Kuan-Wei Chiu has sent along some maintenance work against our sorting
library code in the series "lib/sort: Optimizations and cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB
command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA
jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j
fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg=
=Stxz
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
Not all registers in PMU_ALIVE block support atomic set/clear operations.
GS101_SYSIP_DAT0 and GS101_SYSTEM_CONFIGURATION registers are two regs
where attempting atomic access fails.
As documentation on exactly which registers support atomic operations is
not forthcoming. We default to atomic access, unless the register is
explicitly added to the tensor_is_atomic() function. Update the comment
to reflect this as well.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702063514.6215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
-----BEGIN PGP SIGNATURE-----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=Eknv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lPdX
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Exynos USB 3.1 DRD combo phy, as found in Exynos 9
SoCs like Google GS101. It supports USB SS, HS and DisplayPort.
In terms of UTMI+, this is very similar to the existing Exynos850
support in this driver. The difference is that this combo phy supports
both UTMI+ (HS) and PIPE3 (SS). It also supports DP alt mode.
The number of ports for UTMI+ and PIPE3 can be determined using the
LINKPORT register (which also exists on Exynos E850).
For SuperSpeed (SS) a new SS phy is in use and its PIPE3 interface is
new compared to Exynos E850, and also very different from the existing
support for older Exynos SoCs in this driver.
The SS phy needs a bit more configuration work and register tuning for
signal quality to work reliably, presumably due to the higher
frequency, e.g. to account for different board layouts. Additionally,
power needs to be enabled before writing to the SS phy registers.
This commit adds the necessary changes for USB HS and SS to work.
DisplayPort is out of scope in this commit.
Notes:
* For the register tuning, exynos5_usbdrd_apply_phy_tunes() has been
added with the appropriate data structures to support tuning at
various stages during initialisation. Since these are hardware
specific, the platform data is supposed to be populated accordingly.
The implementation is loosely modelled after the Samsung UFS PHY
driver.
There is one tuning state for UTMI+, PTS_UTMI_POSTINIT, to execute
after init and generally intended for HS signal tuning, as done in
this commit.
PTS_PIPE3_PREINIT PTS_PIPE3_INIT PTS_PIPE3_POSTINIT
PTS_PIPE3_POSTLOCK are tuning states for PIPE3. In the downstream
driver, preinit differs by Exynos SoC, and postinit and postlock
are different per board. The latter haven't been implemented for
gs101 here, because downstream doesn't use them on gs101 either.
* Signal lock acquisition for SS depends on the orientation of the
USB-C plug. Since there currently is no infrastructure to chain
connector events to both the USB DWC3 driver and this phy driver, a
work-around has been added in
exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock() to check both
registers if it failed in one of the orientations.
* Equally, we can only establish SS speed in one of the connector
orientations due to programming differences when selecting the lane
mux in exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(), which really
needs to be dynamic, based on the orientation of the connector.
* As is, we can establish a HS link using any cable, and an SS link in
one orientation of the plug, falling back to HS if the orientation is
reversed to the expectation.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-6-b66de9ae7424@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There were several instances of the string "assocat" in the kernel, which
should have been spelled "associat", with the various endings of -ive,
-ed, -ion, and sometimes beginnging with dis-.
Add to the spelling dictionary the corrections so that future instances
will be caught by checkpatch, and fix the instances found.
Originally noticed by accident with a 'git grep socat'.
Link: https://lkml.kernel.org/r/20240612001247.356867-1-jesse.brandeburg@intel.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Recent (SM8550+ ish) Qualcomm SoCs have a new mechanism for precisely
identifying the specific SKU and the precise speed bin (in the general
meaning of this word, anyway): a pair of values called Product Code
and Feature Code.
Based on this information, we can deduce the available frequencies for
things such as Adreno. In the case of Adreno specifically, Pcode is
useless for non-prototype SoCs.
Introduce a getter for the feature code and export it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-2-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In preparation for parsing the chip "feature code" (FC) and "product
code" (PC) (essentially the parameters that let us conclusively
characterize the sillicon we're running on, including various speed
bins), move the socinfo version defines to the public header.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-1-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Until SM8450, there was only one broadcast region (Broadcast_OR)
used to broadcast write and check for status bit 0.
>From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1. This hasn't been updated and
Broadcast_OR region was wrongly being used to check for status bit 1 all
along.
Hence define new regmap structure for Broadcast_AND region and initialize
this regmap when HW block version is greater than 4.1, otherwise
initialize as a NULL pointer for backwards compatibility.
Switch from broadcast_OR to broadcast_AND region (when defined in DT)
for checking status bit 1 as Broadcast_OR region checks only for bit 0.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/9cf19928a67eaa577ae0f02de5bf86276be34ea2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add qcom_smem_bust_hwspin_lock_by_host to enable remoteproc to bust the
hwspin_lock owned by smem. In the event the remoteproc crashes
unexpectedly, the remoteproc driver can invoke this API to try and bust
the hwspin_lock and release the lock if still held by the remoteproc
device.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-3-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add cmdq_pkt_acquire_event() function to support CMDQ user making
an instruction for acquiring event.
CMDQ users can use cmdq_pkt_acquire_event() as `mutex_lock`
and cmdq_pkt_clear_event() as `mutex_unlock` to protect the global
resource modified instructions between them.
cmdq_pkt_acquire_event() would wait for event to be cleared.
After event is cleared by cmdq_pkt_clear_event() in other GCE threads,
cmdq_pkt_acquire_event() would set event and keep executing next
instruction. So the mutex would work like this:
cmdq_pkt_acquire_event() /* mutex lock */
/* critical secton instructions that modified global resource */
cmdq_pkt_clear_event() /* mutex unlock */
Prevent the critical section instructions from being affected by other
GCE threads.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-5-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_poll_addr function to support CMDQ user making
an instruction for polling a specific address of hardware rigster
to check the value with or without mask.
POLL is a legacy operation in GCE, so it does not support SPR and
CMDQ_CODE_LOGIC. To support polling the register address which doesn't
have the subsys id, CMDQ users need to make an instruction with GPR and
CMDQ_CODE_MASK operation to move the register address to be poll into GPR.
Then users can make an POLL instruction with GPR to poll the register
address assigned in previous instruction.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-4-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Subbaraya Sundeep