Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not present
- eth: virtio_net: fix mismatched buf address when unmapping for small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=l8TJ
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
It looks like that most people are still traveling: both the ML volume
and the processing capacity are low.
Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
present
- eth: virtio_net: fix mismatched buf address when unmapping for
small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from
bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit"
* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
selftests/net: packetdrill: increase timing tolerance in debug mode
usbnet: fix cyclical race on disconnect with work queue
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
virtio_net: Fix mismatched buf address when unmapping for small packets
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
...
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here are the USB-serial updates for 6.12-rc1, including:
- fix kobil_sct initial terminal settings
- set driver owner when registering drivers
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZuEywAAKCRALxc3C7H1l
CFAWAP4muwo7gSV//umprCKbXlFGnsfS7rpDuwusRNTZFjGTPAEAs/n0htTNoFo2
RKKnRcZBk7O6Do6eByIQGuEhCYZjgAw=
=iXi0
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 6.12-rc1
Here are the USB-serial updates for 6.12-rc1, including:
- fix kobil_sct initial terminal settings
- set driver owner when registering drivers
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: kobil_sct: restore initial terminal settings
USB: serial: drop driver owner initialization
USB: serial: set driver owner when registering drivers
We move the func_utils.h header to include/linux/usb to be
able to compile function drivers outside of the
drivers/usb/gadget/function directory.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240116-ml-topic-u9p-v12-1-9a27de5160e0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modules registering drivers with usb_serial_register_drivers() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
USB serial code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ johan: amend commit summary ]
Signed-off-by: Johan Hovold <johan@kernel.org>
'struct config_item_type' is not modified in this file.
Apparently, these structures are only used with
config_group_init_type_name() which takes a const struct config_item_type*
as a 3rd argument.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
40834 5112 64 46010 b3ba drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
41218 4728 64 46010 b3ba drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/513223e97082e1bb758e36d55c175ec9ea34a71c.1723323896.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"linux/usb/gadget_configfs.h" is only included in
"drivers/usb/gadget/configfs.c", so there is no need to declare a function
in the header file. it is only used in this .c file.
It's better to have it static.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/958cb49dca1bff4254a3492c018efbf3b01918b4.1723323107.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, max configuration interfaces are limited to 16, which fails
for compositions containing 10 UVC configurations with interrupt ep
disabled along with other configurations , and we see bind failures
while allocating interface ID in uvc bind.
Increase max configuration interface to 32 to support any large
compositions limited to same size as usb device endpoints as
interfaces cannot be more than endpoints.
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20240801053003.15153-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all fields from register TCPC_TRANSMIT to using GENMASK() and
FIELD_PREP() so as to keep using a similar approach throughout the code
base and make it arguably easier to read.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-7-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert field TCPC_MSG_HDR_INFO_REV from register TCPC_MSG_HDR_INFO to
using GENMASK() and FIELD_PREP() so as to keep using a similar approach
for all fields.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-6-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the last remaining field TCPC_ROLE_CTRL_RP_VAL with the other
fields in the TCPC_ROLE_CTRL register by using GENMASK() and
FIELD_PREP().
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-5-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All this open-coded shifting and masking is quite hard to read, in
particular the if-statement in tcpci_apply_rc().
Declare TCPC_ROLE_CTRL_CC[12] using GENMASK() which allows using
FIELD_GET() and FIELD_PREP() to arguably make the code more legible.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-4-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing code here, particularly in maxim_contaminant.c, is
arguably quite hard to read due to the open-coded masking and shifting
spanning multiple lines.
Use GENMASK() and FIELD_GET() instead, which arguably make the code
much easier to follow.
While at it, use the symbolic name TCPC_CC_STATE_SRC_OPEN for one
instance of open-coded 0x0.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-3-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the beginning of time, struct usb_ep::maxpacket was a bitfield,
and when new 16-bit members were added, the convention was followed:
1da177e4c3 (Linus Torvalds 2005-04-16 236) unsigned maxpacket:16;
e117e742d3 (Robert Baldyga 2013-12-13 237) unsigned maxpacket_limit:16;
a59d6b91cb (Tatyana Brokhman 2011-06-28 238) unsigned max_streams:16;
However, there is no need for this as a simple u16 can be used instead,
simplifying the struct and the resulting compiler binary output. Switch
to u16 for all three, and rearrange struct slightly to minimize holes.
No change in the final size of the struct results; the 2 byte gap is
just moved to the end, as seen with pahole:
- /* XXX 2 bytes hole, try to pack */
...
/* size: 72, cachelines: 2, members: 15 */
...
+ /* padding: 2 */
Changing this simplifies future introspection[1] of maxpacket's type during
allocations:
drivers/usb/gadget/function/f_tcm.c:330:24: error: 'typeof' applied to a bit-field
330 | fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL);
Link: https://lore.kernel.org/all/202407090928.6UaOAZAJ-lkp@intel.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240709154953.work.953-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding altmode ops, update the sysfs group so that visibility is
also recalculated.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240510201244.2968152-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508113809.926155-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The renesas_usbhs_get_info() wrapper was useful for legacy board code.
Since commit 1fa59bda21 ("ARM: shmobile: Remove legacy board code
for Armadillo-800 EVA") in v4.3, it is no longer used outside the USBHS
driver, and provides no added value over dev_get_platdata(), while
obfuscating the real operation.
Drop it, and replace it by dev_get_platdata() in its sole user.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fa296af4452dfe394a58b75fd44c3bb9591936eb.1713282736.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch prepares onboad_hub to support non-hub devices by renaming
the driver files and their content, the headers and their references.
The comments and descriptions have been slightly modified to keep
coherence and account for the specific cases that only affect onboard
hubs (e.g. peer-hub).
The "hub" variables in functions where "dev" (and similar names) variables
already exist have been renamed to onboard_dev for clarity, which adds a
few lines in cases where more than 80 characters are used.
No new functionality has been added.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240325-onboard_xvf3500-v8-2-29e3f9222922@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of
tiny changes and forward progress to support new hardware and better
support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwpzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymS9QCdEuF6KJFLOrDrGS4NbZNSUPIVF6oAn350r4NX
CMZah37Dfr1VDCOOV4gQ
=HACL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
This pull request contains two patches that convert tasklet users to BH
workqueue - backtractest and usb hcd. DM conversions are being routed
through the respective subsystem tree. Hopefully, the next cycle will see a
lot more conversions.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7KuA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUmfAQC6bbrghugnvvAREeJSymM6aATfICTrN98FdBIC
cRn5KgEAqDpKcFA2zbWXPPU7KGBjAAYX199XFc9+NqiXpvCfoA8=
=uQz1
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue BH conversions from Tejun Heo:
"This contains two patches that convert tasklet users to BH workqueues:
backtracetest and usb hcd.
DM conversions are being routed through the respective subsystem tree.
Hopefully, the next cycle will see a lot more conversions"
* tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
usb: core: hcd: Convert from tasklet to BH workqueue
backtracetest: Convert from tasklet to BH workqueue
When a USB hub is described in DT, such as any device that matches the
onboard-hub driver, the connect_type is set to "unknown" or
USB_PORT_CONNECT_TYPE_UNKNOWN. This makes any device plugged into that
USB port report their 'removable' device attribute as "unknown".
ChromeOS userspace would like to know if the USB device is actually
removable or not so that security policies can be applied. Improve the
connect_type attribute for ports, and in turn the removable attribute
for USB devices, by looking for child devices with a reg property or an
OF graph when the device is described in DT.
If the graph exists, endpoints that are connected to a remote node must
be something like a usb-{a,b,c}-connector compatible node, or an
intermediate node like a redriver, and not a hardwired USB device on the
board. Set the connect_type to USB_PORT_CONNECT_TYPE_HOT_PLUG in this
case because the device is going to be plugged in. Set the connect_type
to USB_PORT_CONNECT_TYPE_HARD_WIRED if there's a child node for the port
like 'device@2' for port2. Set the connect_type to USB_PORT_NOT_USED if
there isn't an endpoint or child node corresponding to the port number.
To make sure things don't change, only set the port to not used if
there are child nodes. This way an onboard hub connect_type doesn't
change until ports are added or child nodes are added to describe
hardwired devices. It's assumed that all ports or no ports will be
described for a device.
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Cc: maciek swiech <drmasquatch@google.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240223005823.3074029-3-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a macro. It should be used.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240229132401.3270-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new 'sg_was_mapped' field to the struct usb_request. This field
can be used to indicate that the scatterlist associated to the USB
transfer has already been mapped into the DMA space, and it does not
have to be done internally.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20240130122340.54813-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 398aa9a7e7.
The update to the gadget API to support EBC feature is incomplete. It's
missing at least the following:
* New usage documentation
* Gadget capability check
* Condition for the user to check how many and which endpoints can be
used as "fifo_mode"
* Description of how it can affect completed request (e.g. dwc3 won't
update TRB on completion -- ie. how it can affect request's actual
length report)
Let's revert this until it's ready.
Fixes: 398aa9a7e7 ("usb: dwc3: Support EBC feature of DWC_usb31")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3042f847ff904b4dd4e4cf66a1b9df470e63439e.1707441690.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts usb hcd from tasklet to BH workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Add data message handling and Discover Identity SVDM over SOP'
This patch contains the following changes:
1. pd_vdo
Add VDO indices for active and passive cables, documentation to reflect
expected number of objects depending on PD Revision, and macro to indicate
port parter is data host capable.
2. tcpm
Add typec_cable and typec_plug to tcpm_port to maintain cable and plug
information. tcpm_port also adds send_discover_prime to indicate that
Discover Identity should be sent out of the ready state.
tcpm_queue_vdm and tcpm_send_vdm now take the SOP* type when transmitting
messages. tcpm_handle_vdm_request and tcpm_pd_svdm also use the SOP* type.
tcpm_pd_svdm handles Discover Identity messages for SOP and SOP'. In the
SOP case, the port uses tcpm_attempt_vconn_swap_discovery to determine if
a Vconn swap is needed for cable communication. Otherwise, the port will
send Discover Identity on SOP' if it can, or default to Discover SVIDs.
svdm_consume_identity_sop_prime consumes the result of Discover Identity
on SOP'. It fills out cable identity and description, and it registers
the cable. The SOP' plug is registered as well.
The VDM state machine is adjusted to construct messages based on the SOP*
type. If a transmission error occurs after the max number of retries for
Discover Identity over SOP', then the port will send Discover SVIDs over
SOP.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-22-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add attempt_vconn_swap_discovery callback to determine whether the TCPM
should perform a Vconn swap following Discover Identity on SOP. The tcpci
will return false unless chip level drivers implement the callback.
Maxim based TCPCs will return true unless the last connection resulted in
a Vconn Over Current Fault, which may be the result of the Vconn swap. In
addition to the port resetting, the TCPCI will veto the next Vconn swap
from occurring.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-21-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tx_sop_type to tcpm_pd_send_control and rx_sop_type to
tcpm_pd_ctrl_request. TCPC_TX_SOP is added to all pd_send_control calls,
but TCPC_TX_SOP_PRIME is added to pd_send_control for a SOFT_RESET message
sent after a Vconn swap that makes the Port the Vconn source. Likewise,
tcpm_pd_ctrl_request resets the proper protocol layer depending on
rx_sop_type for SOFT_RESET.
VCONN_SWAP_TURN_ON_VCONN now moves to a new state,
VCONN_SWAP_SEND_SOFT_RESET. This state sends SOFT_RESET over SOP' before
transitioning to the ready state if applicable. It transitions after
PD_T_VCONN_STABLE, definied in pd.h as the time required for Vconn to be
on before transmitting messages.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-20-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm_pd_receive adds the SOP type as a parameter, and passes it within the
pd_rx_event struct for tcpm_pd_rx_handler to use. For now, the handler
drops all SOP' messages.
Maxim based tcpci drivers are capable of SOP' communication, so process_rx
now takes the SOP type into account and passes the value to
tcpm_pd_receive.
tcpci_set_pd_rx now utilizes the cable_comm_capable flag to determine if
TCPC_RX_DETECT_SOP1 should be added to the bitfield when enabling PD
message reception.
For all other consumers of tcpm_pd_receive, default the new field to
TCPC_TX_SOP.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-18-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add cable_comm_capable to tcpci_data for tcpci drivers to indicate that
the port tcpc is capable of communicating to cables over SOP. A
corresponding tcpci callback tcpci_cable_comm_capable returns this value.
The tcpm will primarily use this in later patches to determine if the port
can transmit and receive SOP' messages.
Maxim based tcpci drivers are capable of SOP' communication, so the
cable_comm_capable flag is set to true.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-17-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add typec_cable_set_svdm_version and typec_get_cable_svdm version symbols.
Cables can operate under a lower PD revision than the port partner, and the
max SVDM version is tied to the PD revision. So, typec_cable maintains its
own svdm_version.
Add typec_altmode_get_cable_svdm_version to return the cable's negotiated
svdm_version for altmode drivers to use.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-16-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add typec_cable_ops struct for enter, exit, and vdm. The struct is added
to typec_altmode so port alt modes can have access to partner and cable
specific callbacks, and alt mode drivers can specify operations over SOP'
and SOP'' without modifying the existing API.
typec_port_register_cable_ops is added as a new symbol for port drivers
to use to register cable operations to their registered port alt modes.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240108191620.987785-15-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is likely a copy-paste error. Replace "Source" with "Selector" where
appropriate.
Fixes: 7e84789403 ("linux/usb/audio.h: split header")
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240125211635.30140-1-alexander@tsoy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support configuration and use of bulk endpoints in the so-called EBC
mode described in the DBC_usb31 databook (appendix E)
Added a bit fifo_mode to usb_ep to indicate to the UDC driver that a
specific endpoint is to operate in the EBC (or equivalent) mode when
enabled
Added macros for bits 15 and 14 of DEPCFG parameter 1 to indicate EBC
mode and write back behaviour. These bits will be set to 1 when
configuring an EBC endpoint as described in the programming guide
Signed-off-by: Manan Aurora <maurora@google.com>
Link: https://lore.kernel.org/r/20231031034641.660606-1-maurora@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add TCPC_FAULT_STATUS_VCONN_OC constant and corresponding mask definition.
Maxim TCPC is capable of detecting VConn over current faults, so add
fault to alert mask. When a Vconn over current fault is triggered, put the
port in an error recovery state via tcpm_port_error_recovery.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231121203845.170234-6-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tcpm_port_error_recovery symbol and corresponding event that runs in
tcpm_pd_event handler to set the port to the ERROR_RECOVERY state. tcpci
drivers can use the symbol to reset the port when tcpc faults affect port
functionality.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231121203845.170234-5-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB/PHY/Thunderbolt fixes in here as well for later patches
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a new USB quirk,
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value
for the SET_ADDRESS request. The standard timeout for USB request/command
is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1).
However, certain scenarios, such as connecting devices through an APTIV
hub, can lead to timeout errors when the device enumerates as full speed
initially and later switches to high speed during chirp negotiation.
In such cases, USB analyzer logs reveal that the bus suspends for
5 seconds due to incorrect chirp parsing and resumes only after two
consecutive timeout errors trigger a hub driver reset.
Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us)
_______| Time Stamp(28 . 105 910 682)
_______|_____________________________________________________________Ch0
Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us)
_______| Time Stamp(28 . 106 910 632)
_______|_____________________________________________________________Ch0
Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us)
_______| Time Stamp(28 . 107 910 600)
_______|_____________________________________________________________Ch0
Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms)
_______| Time Stamp(28 . 108 532 832)
_______|_____________________________________________________________Ch0
Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us)
_______| Time Stamp(28 . 247 657 600)
_______|_____________________________________________________________Ch0
This 5-second delay in device enumeration is undesirable, particularly
in automotive applications where quick enumeration is crucial
(ideally within 3 seconds).
The newly introduced quirks provide the flexibility to align with a
3-second time limit, as required in specific contexts like automotive
applications.
By reducing the SET_ADDRESS request timeout to 500 ms, the
system can respond more swiftly to errors, initiate rapid recovery, and
ensure efficient device enumeration. This change is vital for scenarios
where rapid smartphone enumeration and screen projection are essential.
To use the quirk, please write "vendor_id:product_id:p" to
/sys/bus/usb/drivers/hub/module/parameter/quirks
For example,
echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks"
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a08799cf17.
The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.
Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.
We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.
Revert the new notification interface which is broken by design.
Fixes: a08799cf17 ("usb: phy: add usb phy notify port status API")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active
parameter to active in case the ChipIdea USB IP role is device-only and
there is no otgsc register.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding functions that USB hub code can use to inform the
Type-C class about connected USB devices.
Once taken into use, it will allow the Type-C port drivers
to power off components that are not needed, for example if
USB2 device is enumerated, everything that is only relevant
for USB3 (retimers, etc.), can be powered off.
This will also create a symlink "typec" for the USB devices
pointing to the USB Type-C partner device.
Suggested-by: Benson Leung <bleung@chromium.org>
Tested-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231011105825.320062-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implements the USB part of Intel USB-I2C/GPIO/SPI adapter device
named "La Jolla Cove Adapter" (LJCA).
The communication between the various LJCA module drivers and the
hardware will be muxed/demuxed by this driver. Three modules (
I2C, GPIO, and SPI) are supported currently.
Each sub-module of LJCA device is identified by type field within
the LJCA message header.
The sub-modules of LJCA can use ljca_transfer() to issue a transfer
between host and hardware. And ljca_register_event_cb is exported
to LJCA sub-module drivers for hardware event subscription.
The minimum code in ASL that covers this board is
Scope (\_SB.PCI0.DWC3.RHUB.HS01)
{
Device (GPIO)
{
Name (_ADR, Zero)
Name (_STA, 0x0F)
}
Device (I2C)
{
Name (_ADR, One)
Name (_STA, 0x0F)
}
Device (SPI)
{
Name (_ADR, 0x02)
Name (_STA, 0x0F)
}
}
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/1696833205-16716-2-git-send-email-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds