GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software nodes
- allow matching GPIO controllers by secondary firmware node if matching
by primary does not succeed
- demote deferral warnings to debug level as they are quite normal when
using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig by
default
- rework several core functions in preparation for the upcoming Revocable
helper library for protecting resources against sudden removal, this
reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by using
FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol to
control GPIOs (along with SCMI changes pulled from the pinctrl tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in several
GPIO drivers by normalizing any values other than 0, 1 or negative error
numbers
- use flexible arrays in several drivers to reduce the number of required
memory allocations
- simplify synchronous waiting for virtual drivers to probe and remove the
dedicated, a bit overengineered helper library dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers and
subsystems
- convert the two remaining users of of_get_named_gpio() to using GPIO
descriptors and remove the (no longer used) function along with the
header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from gpio-ts4800,
it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path on
OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the corresponding
device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using software
nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with software
nodes
-----BEGIN PGP SIGNATURE-----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=VknJ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
With no more users, remove legacy machine hog API from the kernel.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-5-4e61f3dbf06a@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
It is not clearly documented that the GPIO driver API expect the
driver to get/set the physical level of the GPIO line and the
consumer API will get/set the logic level. Document this in
relevant places.
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260306-gpio-doc-levels-v1-1-19928739e400@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Avoid these kernel-doc warnings by:
- adding short descriptions for enums
- using correct (matching) struct names in kernel-doc short descriptions
- using the correct struct member name for @nfunctions
Warning: include/linux/gpio/gpio-nomadik.h:116 missing initial short
description on line: * enum prcm_gpiocr_reg_index
Warning: include/linux/gpio/gpio-nomadik.h:125 missing initial short
description on line: * enum prcm_gpiocr_altcx_index
Warning: include/linux/gpio/gpio-nomadik.h:146 expecting prototype for
struct prcm_gpio_altcx. Prototype was for struct prcm_gpiocr_altcx instead
Warning: include/linux/gpio/gpio-nomadik.h:156 expecting prototype for
struct prcm_gpio_altcx_pin_desc. Prototype was for
struct prcm_gpiocr_altcx_pin_desc instead
Warning: include/linux/gpio/gpio-nomadik.h:212 struct member 'nfunctions'
not described in 'nmk_pinctrl_soc_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260301014811.3133250-1-rdunlap@infradead.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
GPIO_LINE_DIRECTION_IN/OUT definitions are used both in supplier (GPIO
controller drivers) as well as consumer code. In order to not force the
consumers to include gpio/driver.h or - even worse - to redefine these
values, create a new header file - gpio/defs.h - and move them over
there. Include this header from both gpio/consumer.h and gpio/driver.h.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260223172006.204268-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The helper makes it easier to handle optional GPIOs and simplifies the
error handling code.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20260126-gpio-devm_fwnode_gpiod_get_optional-v2-1-ec34f8e35077@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add a ':' to the end of struct member names to prevent kernel-doc
warnings:
Warning: include/linux/gpio/regmap.h:108 struct member 'regmap_irq_line'
not described in 'gpio_regmap_config'
Warning: include/linux/gpio/regmap.h:108 struct member 'regmap_irq_flags'
not described in 'gpio_regmap_config'
Fixes: 553b75d4bf ("gpio: regmap: Allow to allocate regmap-irq device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251128062739.845403-1-rdunlap@infradead.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add better support for GPIOs shared by multiple consumers.
-----BEGIN PGP SIGNATURE-----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=fa8j
-----END PGP SIGNATURE-----
Merge tag 'gpio/shared-gpios-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reading the GPIO hardware number from a descriptor is a valid use-case
outside of the GPIO core. Export the symbol to consumers of GPIO
descriptors.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20251016-aspeed-gpiolib-include-v1-2-31201c06d124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Last user of linux/gpio/legacy-of-mm-gpiochip.h is gone.
Remove linux/gpio/legacy-of-mm-gpiochip.h and
CONFIG_OF_GPIO_MM_GPIOCHIP
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, Input, Pinctrl
and PWM trees containing the GPIO driver for max7360.
Allows to populate the gpio_regmap_config structure with
init_valid_mask() callback to set on the final gpio_chip structure.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-6-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
With all users of bgpio_init() converted to using the modernized generic
GPIO chip API, we can now move the gpio-mmio-specific fields out of
struct gpio_chip and into the dedicated struct gpio_generic_chip. To
that end: adjust the gpio-mmio driver to the new layout, update the
docs, etc.
The changes in gpio-mlxbf2.c and gpio-mpc8xxx.c are here and not in their
respective conversion commits because the former passes the address of
the generic chip's lock to the __releases() annotation and we cannot
really hide it while gpio-mpc8xxx.c accesses the shadow registers in a
driver-specific workaround and there's no reason to make them available
in a public API.
Also: drop the relevant task from TODO as it's now done.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250910-gpio-mmio-gpio-conv-part4-v2-15-f3d1a4c57124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-2-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Provide helpers wrapping the read_reg() and write_reg() callbacks of the
generic GPIO API that are called directly by many users. This is done to
hide their implementation ahead of moving them into the separate generic
GPIO struct.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-2-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a data pointer to store private data in the forwarder.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-8-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add request() callback to check if the GPIO descriptor was well registered
in the gpiochip_fwd before using it. This is done to handle the case where
GPIO descriptor is added at runtime in the forwarder.
If at least one GPIO descriptor was not added before the forwarder
registration, we assume the forwarder can sleep as if a GPIO is added at
runtime it may sleep.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-7-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Export all symbols and create header file for the GPIO forwarder library.
It will be used in the next changes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-6-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support to register for GPIO<->pin mapping using a list of non
consecutive pins. The core already supports sparse pin range (pins member
of struct pinctrl_gpio_range), but it was not possible to register one. If
pins is not NULL the core uses it, otherwise it assumes that a consecutive
pin range was registered and it uses pin_base.
The function gpiochip_add_pin_range() which allocates and fills the struct
pinctrl_gpio_range was renamed to gpiochip_add_pin_range_with_pins() and
the pins parameter was added.
Two new functions were added, gpiochip_add_pin_range() and
gpiochip_add_sparse_pin_range() to register a consecutive or sparse pins
range. Both use gpiochip_add_pin_range_with_pins().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250811-aaeon-up-board-pinctrl-support-v9-1-29f0cbbdfb30@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With no more users of the legacy GPIO line value setters - .set() and
.set_multiple() - we can now remove them from the kernel.
Link: https://lore.kernel.org/r/20250725074651.14002-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As the first step in removing the fields specific to the gpio-mmio
module from struct gpio_chip, we introduce a new set of generic GPIO
chip interfaces that are meant to replace the existing bgpio_ ones.
The new initialization function - gpio_generic_chip_init() - takes a
configuration structure as argument instead of 9 separate parameters.
This will allow easy extension if needed in the future. We hide the
locking details behind a set of helpers in order to be able to move the
raw spinlock out of struct gpio_chip without the users noticing.
For now, the new APIs just wrap the existing ones. Once all users have
been converted to the new interfaces, we'll pull them into gpio-mmio and
implement them in a backward-compatible way while also moving all fields
specific to the generic GPIO chip into struct gpio_generic_chip.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250702-gpio-mmio-rework-v2-1-6b77aab684d8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Remove struct bgpio_pdata after converting its users to generic device
properties.
-----BEGIN PGP SIGNATURE-----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=k0Ui
-----END PGP SIGNATURE-----
Merge tag 'gpio-mmio-remove-bgpio-pdata-for-v6.17-rc1' into gpio/for-next
Immutable branch between GPIO, MFD and ARM-SoC for v6.17-rc1
Remove struct bgpio_pdata after converting its users to generic device
properties.
With no more users, we can now remove struct bgpio_pdata. Move the
relevant bits from bgpio_parse_fw() into bgpio_pdev_probe() while
maintaining the logical ordering (get flags before calling
bgpio_init()).
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-6-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When using bgpio_init with a gpiochip acting as a GPO (output only), the
gpiochip ops `direction_input` was set to `bgpio_simple_dir_in` by
default but we have no input ability.
Adding this flag allows to set a valid ops for the `direction_output`
ops without setting a valid ops for `direction_input` by default.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250613-hdp-upstream-v5-1-6fd6f0dc527c@foss.st.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmgtn20ACgkQb7wzTHR8
rChZig//SRA4VGnOF6nZfP985YZ9YjwdPibnxmkWBvyOodpJl3I1iiex1XrbX1MI
DxfQGDe8OhXWM6LL/569BCdSy5jHVpFGxISueIzz7gQ7WhzeWpC4/zO8wlW4InTy
xI/GScxqp65Rs0rLy+7OL3OEMSGJZbDLLZuadQnEAVfxRP5jCPDhBQyQBRdrQJyR
T+exFet5J6eMFvigpVcjCR3/Mlyp8Af/tgagtbL638/kOkfa2cgyMPTVO7Nmunrt
lLyAZVXytHN7DyhrIxh+H90U38oObix8rNOEXC2wdZMFjan75wOsq/+FxcrJPhzR
k2FsyVzM5ggcvWcR9gHXxwczSNu6g8wAzn20ibPfbdsVyNiKIyw+0mX8/JUN4mCS
Nc3xLxPM7cuve09Z6aAm8M1tPpOqrb0ATgv2kjV+yid7SLIEBgeJLru8Js+vjC0V
Cj+0jtlgUKiaNAo0g0Sp5JrARnJz95bNVTqVYqkcK5fqaFHR9OfI1Zd56Cgi1PBL
N2xqjlYHwm5QuKaXsq/5/81AmBjlHLkTLSlGo2w3ZRjHyFLVINRBGypZuKYFvZJ1
tZAgvK4r3GoBC6iJ+aXPy0ggr/oRbL0lIBTa/Za+rDij+rDhRCn1XwLcZ63tEry5
eJaTazj7lt1v1TXTgJRqqD2W0frSc5Ir7xipG5jcAjPnONPYo0s=
=WChc
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.16-1
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-18-jirislaby@kernel.org
There are users in the kernel that directly compare raw GPIO descriptor
pointers in order to determine whether they refer to the same physical
GPIO pin. This accidentally works like this but is not guaranteed by any
API contract. Let's provide a comparator function that hides the actual
logic.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The non-exclusive GPIO request flag looks like a functional feature but
is in fact a workaround for a corner-case that got out of hand. It should
be removed so deprecate it officially so that nobody uses it anymore.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-1-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The line_index member in the struct acpi_gpio_params replicates
what is covered in the ACPI GpioIo() or GpioInt() resource.
The value there is limited to 16-bit one, so we don't really need
to have a full 32-bit storage for it. Together with followed
boolean the structure will be smaller.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3)
Function old new delta
acpi_gpio_property_lookup 417 414 -3
Total: Before=15361, After=15358, chg -0.02%
`pahole` difference before and after:
- /* size: 12, cachelines: 1, members: 3 */
- /* padding: 3 */
+ /* size: 8, cachelines: 1, members: 3 */
+ /* padding: 1 */
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. Current documentation does not
mention this but just says the valid_mask is used if it's not NULL. This
lured me to try populating it directly in the GPIO driver probe instead
of using the init_valid_mask() callback. It took some retries with
different bitmaps and eventually a bit of code-reading to understand why
the valid_mask was not obeyed. I could've avoided this trial and error if
the valid_mask was hidden in the struct gpio_device instead of being a
visible member of the struct gpio_chip.
Help the next developer who decides to directly populate the valid_mask
in struct gpio_chip by hiding the valid_mask in struct gpio_device and
keep it internal to the GPIO core.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/4547ca90d910d60cab3d56d864d59ddde47a5e93.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. It shouldn't be directly
populated by drivers. This can be prevented by moving it from the struct
gpio_chip to struct gpio_device, which is internal to the GPIO core.
As a preparatory step, provide a getter function which can be used by
those drivers which need the valid_mask information.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/026f9d78502eca883bfe3faeb684e23d5d6c5e84.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When describing GPIO controllers in the device tree, the ambition
of device tree to describe the hardware may require a three-cell
scheme:
gpios = <&gpio instance offset flags>;
This implements support for this scheme in the gpiolib OF core.
Drivers that want to handle multiple gpiochip instances from one
OF node need to implement a callback similar to this to
determine if a certain gpio chip is a pointer to the right
instance (pseudo-code):
struct my_gpio {
struct gpio_chip gcs[MAX_CHIPS];
};
static bool my_of_node_instance_match(struct gpio_chip *gc
unsigned int instance)
{
struct my_gpio *mg = gpiochip_get_data(gc);
if (instance >= MAX_CHIPS)
return false;
return (gc == &mg->gcs[instance]);
}
probe() {
struct my_gpio *mg;
struct gpio_chip *gc;
int i, ret;
for (i = 0; i++; i < MAX_CHIPS) {
gc = &mg->gcs[i];
/* This tells gpiolib we have several instances per node */
gc->of_gpio_n_cells = 3;
gc->of_node_instance_match = my_of_node_instance_match;
gc->base = -1;
...
ret = devm_gpiochip_add_data(dev, gc, mg);
if (ret)
return ret;
}
}
Rename the "simple" of_xlate function to "twocell" which is closer
to what it actually does.
In the device tree bindings, the provide node needs
to specify #gpio-cells = <3>; where the first cell is the instance
number:
gpios = <&gpio instance offset flags>;
Conversely ranges need to have four cells:
gpio-ranges = <&pinctrl instance gpio_offset pin_offset count>;
Reviewed-by: Alex Elder <elder@riscstar.com>
Tested-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-gpio-ranges-fourcell-v3-2-860382ba4713@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We now have setter callbacks that allow us to indicate success or
failure using the integer return value. Deprecate the older callbacks so
that no new code is tempted to use them.
Link: https://lore.kernel.org/r/20250227083748.22400-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add new variants of the set() and set_multiple() callbacks that have
integer return values allowing to indicate failures to users of the GPIO
consumer API. Until we convert all GPIO providers treewide to using
them, they will live in parallel to the existing ones.
Make sure that providers cannot define both. Prefer the new ones and
only use the old ones as fallback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-5-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Change the in-kernel consumer interface for GPIOs: make all variants of
value setters that don't have a return value, return a signed integer
instead. That will allow these routines to indicate failures to callers.
This doesn't change the implementation just yet, we'll do it in
subsequent commits.
We need to update the gpio-latch module as it passes the address of
value setters as a function pointer argument and thus cares about its
type.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-2-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Andy suggested we should keep a fine-grained scheme for includes and
only pull in stuff required within individual ifdef sections. Let's
revert commit dea69f2d1c ("gpiolib: move all includes to the top of
gpio/consumer.h") and make the headers situation even more fine-grained
by only including the first level headers containing requireded symbols
except for bug.h where checkpatch.pl warns against including asm/bug.h.
Fixes: dea69f2d1c ("gpiolib: move all includes to the top of gpio/consumer.h")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/Z7XPcYtaA4COHDYj@smile.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20250225095210.25910-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It turns out that with this flag we can switch over an entire
driver to use gpio-mmio instead of a bunch of custom code,
also providing get/set_multiple() to it in the process, so it
seems like a reasonable feature to add.
The generic pin control backend requires us to call the
gpiochip_generic_request(), gpiochip_generic_free(),
pinctrl_gpio_direction_output() and pinctrl_gpio_direction_input()
callbacks, so if the new flag for a pin control back-end
is set, we make sure these functions get called as
expected.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250219-vf610-mmio-v3-1-588b64f0b689@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Linus Torvalds