Attach flags is only valid for attached progs of this layer cgroup,
but not for effective progs. For querying with EFFECTIVE flags,
exporting attach flags does not make sense. So when effective query,
we reject prog_attach_flags array and don't need to populate it.
Also we limit attach_flags to output 0 during effective query.
Fixes: b79c9fc955 ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20220921104604.2340580-2-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add modifiers for reporting rotations as euler angles (i.e. yaw, pitch and
roll).
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-5-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add IIO_MOD_LINEAR_X, IIO_MOD_LINEAR_Y and IIO_MOD_LINEAR_Z modifiers to te
IIO core, which is preparatory for adding the Bosch BNO055 IMU driver.
Bosch BNO055 IMU can report raw accelerations (among x, y and z axis) as
well as the so called "linear accelerations" (again, among x, y and z axis)
which is basically the acceleration after subtracting gravity and for which
those new modifiers are for.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-2-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow deferring async tasks until the user calls io_uring_enter(2) with
the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at
io_uring_setup time. This functionality requires that the later
io_uring_enter will be called from the same submission task, and therefore
restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also
set.
Being able to hand pick when tasks are run prevents the problem where
there is current work to be done, however task work runs anyway.
For example, a common workload would obtain a batch of CQEs, and process
each one. Interrupting this to additional taskwork would add latency but
not gain anything. If instead task work is deferred to just before more
CQEs are obtained then no additional latency is added.
The way this is implemented is by trying to keep task work local to a
io_ring_ctx, rather than to the submission task. This is required, as the
application will want to wake up only a single io_ring_ctx at a time to
process work, and so the lists of work have to be kept separate.
This has some other benefits like not having to check the task continually
in handle_tw_list (and potentially unlocking/locking those), and reducing
locks in the submit & process completions path.
There are networking cases where using this option can reduce request
latency by 50%. For example a contrived example using [1] where the client
sends 2k data and receives the same data back while doing some system
calls (to trigger task work) shows this reduction. The reason ends up
being that if sending responses is delayed by processing task work, then
the client side sits idle. Whereas reordering the sends first means that
the client runs it's workload in parallel with the local task work.
[1]:
Using https://github.com/DylanZA/netbench/tree/defer_run
Client:
./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000"
Server:
./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100"
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=fUm6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...
When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.
Remove it now.
Also, in xt_connmark.h, move the copyright text at the top of the file
which is a much more common pattern.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
This allows to export the type in BTF and so in the automatically
generated vmlinux.h. It will also add some static checks on the users
when we change the ll driver API (see not below).
Note that we need to also do change in the ll_driver API, but given
that this will have a wider impact outside of this tree, we leave this
as a TODO for the future.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220902132938.2409206-11-benjamin.tissoires@redhat.com
When we are dealing with eBPF, we need to have access to the report type.
Currently our implementation differs from the USB standard, making it
impossible for users to know the exact value besides hardcoding it
themselves.
And instead of a blank define, convert it as an enum.
Note that we need to also do change in the ll_driver API, but given
that this will have a wider impact outside of this tree, we leave this
as a TODO for the future.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220902132938.2409206-10-benjamin.tissoires@redhat.com
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
The NEXT-C-SID mechanism relies on the "flavors" framework defined in
[2]. The flavors represent additional operations that can modify or
extend a subset of the existing behaviors.
This patch introduces the support for flavors in SRv6 End behavior
implementing the NEXT-C-SID one. An SRv6 End behavior with NEXT-C-SID
flavor works as an End behavior but it is capable of processing the
compressed SID List encoded in C-SID containers.
An SRv6 End behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some DSA switches have multiple CPU ports, which can be used to improve
CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(),
sets up only the first one, leading to suboptimal use of hardware.
The desire is to not change the default configuration but to permit the
user to create a dynamic mapping between individual user ports and the
CPU port that they are served by, configurable through rtnetlink. It is
also intended to permit load balancing between CPU ports, and in that
case, the foreseen model is for the DSA master to be a bonding interface
whose lowers are the physical DSA masters.
To that end, we create a struct rtnl_link_ops for DSA user ports with
the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that
contains the ifindex of the newly desired DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for matching on L2TPv3 session ID.
Session ID can be specified only when ip proto was
set to IPPROTO_L2TP.
Example filter:
# tc filter add dev $PF1 ingress prio 1 protocol ip \
flower \
ip_proto l2tp \
l2tpv3_sid 1234 \
skip_sw \
action mirred egress redirect dev $VF1_PR
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPPROTO_L2TP is currently defined in l2tp.h, but most of
ip protocols are defined in in.h file. Move it there in order
to keep code clean.
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMi3OwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXafhCACHLzDn9otKPWe+w6Lt1RSuhKvhbuhO
XywQ4EBEUddOrqYarEuFiuWZMq1/PLGnkWVQotzElZR9HtkTUUetXgfsWHv39uo+
SqUK7P+DnuT9AvvUkk1ZoyVYxs8FnVWoPlcBli+zXZCjtg/XYn/2qPGJlaNPovLv
hzVokS/RVxlPIrQiNWVmkHyTb6LyLdLit802dtdaxKmQcUCgYVAiz+DwR0PwBEWs
e1K046RIfl5QejpkVq+pIXpTGu1C4m2bv1umPCts1OLtBGkHf7Dwu9HmgWPDwY91
0oJt/00NpQLgg77vnOJnv0M/TZE9cP9gp7zFh7b43qg0TpIzHhJJYJut
=UEkq
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220915' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Like what was done with IFLA_PROMISCUITY, add IFLA_ALLMULTI to advertise
the allmulti counter.
The flag IFF_ALLMULTI is advertised only if it was directly set by a
userland app.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable CAN_RAW sockets to read and write CAN XL frames analogue to the
CAN FD extension (new CAN_RAW_XL_FRAMES sockopt).
A CAN XL network interface is capable to handle Classical CAN, CAN FD and
CAN XL frames. When CAN_RAW_XL_FRAMES is enabled, the CAN_RAW socket checks
whether the addressed CAN network interface is capable to handle the
provided CAN frame.
In opposite to the fixed number of bytes for
- CAN frames (CAN_MTU = sizeof(struct can_frame))
- CAN FD frames (CANFD_MTU = sizeof(struct can_frame))
the number of bytes when reading/writing CAN XL frames depends on the
number of data bytes. For efficiency reasons the length of the struct
canxl_frame is truncated to the needed size for read/write operations.
This leads to a calculated size of CANXL_HDR_SIZE + canxl_frame::len which
is enforced on write() operations and guaranteed on read() operations.
NB: Valid length values are 1 .. 2048 (CANXL_MIN_DLEN .. CANXL_MAX_DLEN).
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-8-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- add new ETH_P_CANXL ethernet protocol type
- update skb checks for CAN XL
- add alloc_canxl_skb() which now needs a data length parameter
- introduce init_can_skb_reserve() to reduce code duplication
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-6-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds defines for data structures and length information for
CAN XL (CAN with eXtended data Length) which can transfer up to 2048
byte inside a single frame.
Notable changes from CAN FD:
- the 11 bit arbitration field is now named 'priority' instead of 'can_id'
(there are no 29 bit identifiers nor RTR frames anymore)
- the data length needs a uint16 value to cover up to 2048 byte
(the length element position is different to struct can[fd]_frame)
- new fields (SDT, AF) and a SEC bit have been introduced
- the virtual CAN interface identifier is not part if the CAN XL frame
struct as this VCID value is stored in struct skbuff (analog to vlan id)
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-5-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
To simplify the testing in user space all struct canfd_frame's provided by
the CAN subsystem of the Linux kernel now have the CANFD_FDF flag set in
canfd_frame::flags.
NB: Handcrafted ETH_P_CANFD frames introduced via PF_PACKET socket might
not set this bit correctly. During the check for sufficient headroom in
PF_PACKET sk_buffs the uninitialized CAN sk_buff data structures are filled.
In the case of a CAN FD frame the CANFD_FDF flag is set accordingly.
As the CAN frame content is already zero initialized in alloc_canfd_skb()
the obsolete initialization of cf->flags in the CTU CAN FD driver has been
removed as it would overwrite the already set CANFD_FDF flag.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-4-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Historically, it has been shown that intercepting kernel faults with
userfaultfd (thereby forcing the kernel to wait for an arbitrary amount of
time) can be exploited, or at least can make some kinds of exploits
easier. So, in 37cd0575b8 "userfaultfd: add UFFD_USER_MODE_ONLY" we
changed things so, in order for kernel faults to be handled by
userfaultfd, either the process needs CAP_SYS_PTRACE, or this sysctl must
be configured so that any unprivileged user can do it.
In a typical implementation of a hypervisor with live migration (take
QEMU/KVM as one such example), we do indeed need to be able to handle
kernel faults. But, both options above are less than ideal:
- Toggling the sysctl increases attack surface by allowing any
unprivileged user to do it.
- Granting the live migration process CAP_SYS_PTRACE gives it this
ability, but *also* the ability to "observe and control the
execution of another process [...], and examine and change [its]
memory and registers" (from ptrace(2)). This isn't something we need
or want to be able to do, so granting this permission violates the
"principle of least privilege".
This is all a long winded way to say: we want a more fine-grained way to
grant access to userfaultfd, without granting other additional permissions
at the same time.
To achieve this, add a /dev/userfaultfd misc device. This device provides
an alternative to the userfaultfd(2) syscall for the creation of new
userfaultfds. The idea is, any userfaultfds created this way will be able
to handle kernel faults, without the caller having any special
capabilities. Access to this mechanism is instead restricted using e.g.
standard filesystem permissions.
[axelrasmussen@google.com: Handle misc_register() failure properly]
Link: https://lkml.kernel.org/r/20220819205201.658693-3-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-3-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Traditionally, the conditions for when DIO (direct I/O) is supported
were fairly simple. For both block devices and regular files, DIO had
to be aligned to the logical block size of the block device.
However, due to filesystem features that have been added over time (e.g.
multi-device support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode), the conditions
for when DIO is allowed on a regular file have gotten increasingly
complex. Whether a particular regular file supports DIO, and with what
alignment, can depend on various file attributes and filesystem mount
options, as well as which block device(s) the file's data is located on.
Moreover, the general rule of DIO needing to be aligned to the block
device's logical block size was recently relaxed to allow user buffers
(but not file offsets) aligned to the DMA alignment instead. See
commit bf8d08532b ("iomap: add support for dma aligned direct-io").
XFS has an ioctl XFS_IOC_DIOINFO that exposes DIO alignment information.
Uplifting this to the VFS is one possibility. However, as discussed
(https://lore.kernel.org/linux-fsdevel/20220120071215.123274-1-ebiggers@kernel.org/T/#u),
this ioctl is rarely used and not known to be used outside of
XFS-specific code. It was also never intended to indicate when a file
doesn't support DIO at all, nor was it intended for block devices.
Therefore, let's expose this information via statx(). Add the
STATX_DIOALIGN flag and two new statx fields associated with it:
* stx_dio_mem_align: the alignment (in bytes) required for user memory
buffers for DIO, or 0 if DIO is not supported on the file.
* stx_dio_offset_align: the alignment (in bytes) required for file
offsets and I/O segment lengths for DIO, or 0 if DIO is not supported
on the file. This will only be nonzero if stx_dio_mem_align is
nonzero, and vice versa.
Note that as with other statx() extensions, if STATX_DIOALIGN isn't set
in the returned statx struct, then these new fields won't be filled in.
This will happen if the file is neither a regular file nor a block
device, or if the file is a regular file and the filesystem doesn't
support STATX_DIOALIGN. It might also happen if the caller didn't
include STATX_DIOALIGN in the request mask, since statx() isn't required
to return unrequested information.
This commit only adds the VFS-level plumbing for STATX_DIOALIGN. For
regular files, individual filesystems will still need to add code to
support it. For block devices, a separate commit will wire it up too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-2-ebiggers@kernel.org
Florian Westphal says:
====================
The following set contains changes for your *net-next* tree:
- make conntrack ignore packets that are delayed (containing
data already acked). The current behaviour to flag them as INVALID
causes more harm than good, let them pass so peer can send an
immediate ACK for the most recent sequence number.
- make conntrack recognize when both peers have sent 'invalid' FINs:
This helps cleaning out stale connections faster for those cases where
conntrack is no longer in sync with the actual connection state.
- Now that DECNET is gone, we don't need to reserve space for DECNET
related information.
- compact common 'find a free port number for the new inbound
connection' code and move it to a helper, then cap number of tries
the new helper will make until it gives up.
- replace various instances of strlcpy with strscpy, from Wolfram Sang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA logging allows a device to internally record what DMAs the device is
initiating and report them back to userspace. It is part of the VFIO
migration infrastructure that allows implementing dirty page tracking
during the pre copy phase of live migration. Only DMA WRITEs are logged,
and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
This patch introduces the DMA logging involved uAPIs.
It uses the FEATURE ioctl with its GET/SET/PROBE options as of below.
It exposes a PROBE option to detect if the device supports DMA logging.
It exposes a SET option to start device DMA logging in given IOVAs
ranges.
It exposes a SET option to stop device DMA logging that was previously
started.
It exposes a GET option to read back and clear the device DMA log.
Extra details exist as part of vfio.h per a specific option.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now instead of the number of arguments, the number of registers
holding argument values are stored in trampoline. Update
the description of bpf_get_func_arg[_cnt]() helpers. Previous
programs without struct arguments should continue to work
as usual.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152657.2078805-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771d ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new event type for tap called gesture and the direction can be used
to differentiate single and double tap. This may be used by accelerometer
sensors to express single and double tap events. For directional tap,
modifiers like IIO_MOD_(X/Y/Z) can be used along with singletap and
doubletap direction.
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220831063117.4141-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We need the USB fixes in here and this resolves the merge issue in:
drivers/usb/dwc3/gadget.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmMTck0ACgkQB8qZga/f
l8RHFg//XLv1kpmN0LfsfrpMxJjM0j+kYV+B3gcAlJQBl/KRJg/09sIYzPORJeH1
xrt9JR4SMkIECJigZCu0icP+c+0YVS0aWXTv8aEHuXDRKN2AbQB4yC7MA+PXHVTA
LO2dSVKIfUjBPR1Q05M0kKIpf5KYJWuND7IGO28P8+VF4NIZl2PQ+jCxQY6e2SR6
LB9OuWhQ4QT38LsjbKcRt/994sFOgVO+EuMmNaLyBe85HfXBAZ4ZQEyjezevzCV9
TzqFinzMNU4hIC7ct4cXdHwzrpuTXqKdaOEWMFMsChexsb8R8GrIhaguIiBCtFQ4
vKbL58wZt9mnKUk68hEHNQSWSnusqwxEsy0BHFgjD0KxLbXX1xgup/jZLDDLaJqv
2jZJVy0yeUdSheuloXEO9Fr959/YyxcJtu4ycKbhHP4oIzwRloQucxfx3w2Xb6Dq
G/jzofX6eqkUhCKPikBd7m8wx4/B/eezAMlSGucaPC4eGDu+qIDctU5eF10FhE1p
CtoFpbnuMghVLxWDeU2MU7Riz4oOSsXT29cP1Qg9W9Vwz0spBL4IcBawbta8/H9t
CpuDaUapbPNpSnkumfID7z3O4WL+f7tkTQea8Asv84nJ7ikPhrPlM3bES5qlHpSJ
rqjn4k63s0Qkn3NZQRSUC1Rhjk5DTm9ccEx+CeAIlpk6MR2fFtU=
=7imA
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
drivers
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an MLD address attribute to BSS entries that the interface
is currently associated with to help userspace figure out what's
going on.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new extended feature bit signifying that the wireless hardware
supports changing the MAC address while the underlying net_device is
powered. Note that this has a different meaning from
IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by
the hardware, such as:
- No connection is active on this interface, carrier is off
- No scan is in progress
- No offchannel operations are in progress
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now have a cleaner way to keep compatibility with user-space
(a.k.a. not breaking it) when we need to keep in place a one-element
array (for its use in user-space) together with a flexible-array
member (for its use in kernel-space) without making it hard to read
at the source level. This is through the use of the new
__DECLARE_FLEX_ARRAY() helper macro.
The size and memory layout of the structure is preserved after the
changes. See below.
Before changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
union {
struct {
__be32 imsf_multiaddr_aux; /* 0 4 */
__be32 imsf_interface_aux; /* 4 4 */
__u32 imsf_fmode_aux; /* 8 4 */
__u32 imsf_numsrc_aux; /* 12 4 */
__be32 imsf_slist[1]; /* 16 4 */
}; /* 0 20 */
struct {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 0 16 */
}; /* 0 20 */
/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};
After changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
union {
__be32 imsf_slist[1]; /* 16 4 */
struct {
struct {
} __empty_imsf_slist_flex; /* 16 0 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 16 0 */
}; /* 16 4 */
/* size: 20, cachelines: 1, members: 5 */
/* last cacheline: 20 bytes */
};
In the past, we had to duplicate the whole original structure within
a union, and update the names of all the members. Now, we just need to
declare the flexible-array member to be used in kernel-space through
the __DECLARE_FLEX_ARRAY() helper together with the one-element array,
within a union. This makes the source code more clean and easier to read.
Link: https://github.com/KSPP/linux/issues/193
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=yXSa
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
Existing 'bpf_skb_get_tunnel_key' extracts various tunnel parameters
(id, ttl, tos, local and remote) but does not expose ip_tunnel_info's
tun_flags to the BPF program.
It makes sense to expose tun_flags to the BPF program.
Assume for example multiple GRE tunnels maintained on a single GRE
interface in collect_md mode. The program expects origins to initiate
over GRE, however different origins use different GRE characteristics
(e.g. some prefer to use GRE checksum, some do not; some pass a GRE key,
some do not, etc..).
A BPF program getting tun_flags can therefore remember the relevant
flags (e.g. TUNNEL_CSUM, TUNNEL_SEQ...) for each initiating remote. In
the reply path, the program can use 'bpf_skb_set_tunnel_key' in order
to correctly reply to the remote, using similar characteristics, based
on the stored tunnel flags.
Introduce BPF_F_TUNINFO_FLAGS flag for bpf_skb_get_tunnel_key. If
specified, 'bpf_tunnel_key->tunnel_flags' is set with the tun_flags.
Decided to use the existing unused 'tunnel_ext' as the storage for the
'tunnel_flags' in order to avoid changing bpf_tunnel_key's layout.
Also, the following has been considered during the design:
1. Convert the "interesting" internal TUNNEL_xxx flags back to BPF_F_yyy
and place into the new 'tunnel_flags' field. This has 2 drawbacks:
- The BPF_F_yyy flags are from *set_tunnel_key* enumeration space,
e.g. BPF_F_ZERO_CSUM_TX. It is awkward that it is "returned" into
tunnel_flags from a *get_tunnel_key* call.
- Not all "interesting" TUNNEL_xxx flags can be mapped to existing
BPF_F_yyy flags, and it doesn't make sense to create new BPF_F_yyy
flags just for purposes of the returned tunnel_flags.
2. Place key.tun_flags into 'tunnel_flags' but mask them, keeping only
"interesting" flags. That's ok, but the drawback is that what's
"interesting" for my usecase might be limiting for other usecases.
Therefore I decided to expose what's in key.tun_flags *as is*, which seems
most flexible. The BPF user can just choose to ignore bits he's not
interested in. The TUNNEL_xxx are also UAPI, so no harm exposing them
back in the get_tunnel_key call.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-1-shmulik.ladkani@gmail.com
This patch adds the following new device features for the low
power entry and exit in the header file. The implementation for the
same will be added in the subsequent patches.
- VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY
- VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP
- VFIO_DEVICE_FEATURE_LOW_POWER_EXIT
For vfio-pci based devices, with the standard PCI PM registers,
all power states cannot be achieved. The platform-based power management
needs to be involved to go into the lowest power state. For doing low
power entry and exit with platform-based power management,
these device features can be used.
The entry device feature has two variants. These two variants are mainly
to support the different behaviour for the low power entry.
If there is any access for the VFIO device on the host side, then the
device will be moved out of the low power state without the user's
guest driver involvement. Some devices (for example NVIDIA VGA or
3D controller) require the user's guest driver involvement for
each low-power entry. In the first variant, the host can return the
device to low power automatically. The device will continue to
attempt to reach low power until the low power exit feature is called.
In the second variant, if the device exits low power due to an access,
the host kernel will signal the user via the provided eventfd and will
not return the device to low power without a subsequent call to one of
the low power entry features. A call to the low power exit feature is
optional if the user provided eventfd is signaled.
These device features only support VFIO_DEVICE_FEATURE_SET and
VFIO_DEVICE_FEATURE_PROBE operations.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Following user feedback, this patch simplifies zerocopy send API. One of
the main complaints is that the current API is difficult with the
userspace managing notification slots, and then send retries with error
handling make it even worse.
Instead of keeping notification slots change it to the per-request
notifications model, which posts both completion and notification CQEs
for each request when any data has been sent, and only one CQE if it
fails. All notification CQEs will have IORING_CQE_F_NOTIF set and
IORING_CQE_F_MORE in completion CQEs indicates whether to wait a
notification or not.
IOSQE_CQE_SKIP_SUCCESS is disallowed with zerocopy sends for now.
This is less flexible, but greatly simplifies the user API and also the
kernel implementation. We reuse notif helpers in this patch, but in the
future there won't be need for keeping two requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/95287640ab98fc9417370afb16e310677c63e6ce.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
USBIP driver packs URB transfer flags in network packets that are
exchanged between Server (usbip_host) and Client (vhci_hcd).
URB_* flags are internal to kernel and could change. Where as USBIP
URB flags exchanged in network packets are USBIP user API must not
change.
Add USBIP_URB* flags to make this an explicit API and change the
client and server to map them. Details as follows:
Client tx path (USBIP_CMD_SUBMIT):
- Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet.
Server rx path (USBIP_CMD_SUBMIT):
- Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet.
Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets
and no special handling is needed for them in the following cases:
- Server rx path (USBIP_CMD_UNLINK)
- Client rx path & Server tx path (USBIP_RET_SUBMIT)
Update protocol documentation to reflect the change.
Suggested-by: Hongren Zenithal Zheng <i@zenithal.me>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220824002456.94605-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is currently no way to report via extack in a structured way
that an attribute is missing. This leads to families resorting to
string messages.
Add a pair of attributes - @offset and @type for machine-readable
way of reporting missing attributes. The @offset points to the
nest which should have contained the attribute, @type is the
expected nla_type. The offset will be skipped if the attribute
is missing at the message level rather than inside a nest.
User space should be able to figure out which attribute enum
(AKA attribute space AKA attribute set) the nest pointed to by
@offset is using.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The V4L2_CAP_ASYNCIO capability was never implemented (and in fact
it isn't clear what it was supposed to do in the first place).
Drop it from the capabilities list. Keep it in videodev2.h with the
other defines under ifndef __KERNEL__ for backwards compatibility.
This will free up a capability bit for other future uses. And having
an unused and undefined I/O method is just plain confusing.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The comment for the VP8 loop filter flags uses the partially wrong name
for the flags. Unlike the other VP8 flag names, the loop filter flag names
don't have "_FLAG" in them. Change the comment so that it matches the
actual flag definitions in the header.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The DW100 driver gets the dewarping mapping as a binary blob from the
userspace application through a custom control.
The blob format is hardware specific so create a dedicated control for
this purpose.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a control base for DW100 driver controls, and reserve 16 controls.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Allow specifying the xfrm interface if_id and link as part of a route
metadata using the lwtunnel infrastructure.
This allows for example using a single xfrm interface in collect_md
mode as the target of multiple routes each specifying a different if_id.
With the appropriate changes to iproute2, considering an xfrm device
ipsec1 in collect_md mode one can for example add a route specifying
an if_id like so:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1
In which case traffic routed to the device via this route would use
if_id in the xfrm interface policy lookup.
Or in the context of vrf, one can also specify the "link" property:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1 link_dev eth15
Note: LWT_XFRM_LINK uses NLA_U32 similar to IFLA_XFRM_LINK even though
internally "link" is signed. This is consistent with other _LINK
attributes in other devices as well as in bpf and should not have an
effect as device indexes can't be negative.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
BRBE captured branch types will overflow perf_branch_entry.type and generic
branch types in perf_branch_entry.new_type. So override each available arch
specific branch type in the following manner to comprehensively process all
reported branch types in BRBE.
PERF_BR_ARM64_FIQ PERF_BR_NEW_ARCH_1
PERF_BR_ARM64_DEBUG_HALT PERF_BR_NEW_ARCH_2
PERF_BR_ARM64_DEBUG_EXIT PERF_BR_NEW_ARCH_3
PERF_BR_ARM64_DEBUG_INST PERF_BR_NEW_ARCH_4
PERF_BR_ARM64_DEBUG_DATA PERF_BR_NEW_ARCH_5
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220824044822.70230-5-anshuman.khandual@arm.com
Platforms like arm64 could capture privilege level information for all the
branch records. Hence this adds a new element in the struct branch_entry to
record the privilege level information, which could be requested through a
new event.attr.branch_sample_type based flag PERF_SAMPLE_BRANCH_PRIV_SAVE.
This flag helps user choose whether privilege information is captured.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220824044822.70230-4-anshuman.khandual@arm.com
branch_entry.type now has ran out of space to accommodate more branch types
classification. This will prevent perf branch stack implementation on arm64
(via BRBE) to capture all available branch types. Extending this bit field
i.e branch_entry.type [4 bits] is not an option as it will break user space
ABI both for little and big endian perf tools.
Extend branch classification with a new field branch_entry.new_type via a
new branch type PERF_BR_EXTEND_ABI in branch_entry.type. Perf tools which
could decode PERF_BR_EXTEND_ABI, will then parse branch_entry.new_type as
well.
branch_entry.new_type is a 4 bit field which can hold upto 16 branch types.
The first three branch types will hold various generic page faults followed
by five architecture specific branch types, which can be overridden by the
platform for specific use cases. These architecture specific branch types
gets overridden on arm64 platform for BRBE implementation.
New generic branch types
- PERF_BR_NEW_FAULT_ALGN
- PERF_BR_NEW_FAULT_DATA
- PERF_BR_NEW_FAULT_INST
New arch specific branch types
- PERF_BR_NEW_ARCH_1
- PERF_BR_NEW_ARCH_2
- PERF_BR_NEW_ARCH_3
- PERF_BR_NEW_ARCH_4
- PERF_BR_NEW_ARCH_5
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220824044822.70230-3-anshuman.khandual@arm.com
This expands generic branch type classification by adding two more entries
there in i.e system error and not in transaction. This also updates the x86
implementation to process X86_BR_NO_TX records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
--------------------------------------------------------------------------
| kernel | perf tool | Impact |
--------------------------------------------------------------------------
| old | old | Works as before |
--------------------------------------------------------------------------
| old | new | PERF_BR_UNKNOWN is processed |
--------------------------------------------------------------------------
| new | old | PERF_BR_NO_TX is blocked via old PERF_BR_MAX |
--------------------------------------------------------------------------
| new | new | PERF_BR_NO_TX is recognized |
--------------------------------------------------------------------------
When PERF_BR_NO_TX is blocked via old PERF_BR_MAX (new kernel with old perf
tool) the user space might throw up an warning complaining about an
unrecognized branch types being reported, but it's expected. PERF_BR_SERROR
& PERF_BR_NO_TX branch types will be used for BRBE implementation on arm64
platform.
PERF_BR_NO_TX complements 'abort' and 'in_tx' elements in perf_branch_entry
which represent other transaction states for a given branch record. Because
this completes the transaction state classification.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220824044822.70230-2-anshuman.khandual@arm.com
CRIU is preserving ifindexes of net devices after restoration. However,
current Open vSwitch API does not allow to target ifindex, so we cannot
correctly restore OVS configuration.
Add new OVS_DP_ATTR_IFINDEX for OVS_DP_CMD_NEW and use it as desired
ifindex.
Use OVS_VPORT_ATTR_IFINDEX during OVS_VPORT_CMD_NEW to specify new netdev
ifindex.
Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new "spec" bitfield to branch entries for providing speculation
information. This will be populated using hints provided by branch sampling
features on supported hardware. The following cases are covered:
* No branch speculation information is available
* Branch is speculative but taken on the wrong path
* Branch is non-speculative but taken on the correct path
* Branch is speculative and taken on the correct path
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/834088c302faf21c7b665031dd111f424e509a64.1660211399.git.sandipan.das@amd.com
-----BEGIN PGP SIGNATURE-----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=mGLL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-08-26' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Add missing header file to the MAINTAINERS entry for io_uring (Ammar)
- liburing and the kernel ship the same io_uring.h header, but one
change we've had for a long time only in liburing is to ensure it's
C++ safe. Add extern C around it, so we can more easily sync them in
the future (Ammar)
- Fix an off-by-one in the sync cancel added in this merge window (me)
- Error handling fix for passthrough (Kanchan)
- Fix for address saving for async execution for the zc tx support
(Pavel)
- Fix ordering for TCP zc notifications, so we always have them ordered
correctly between "data was sent" and "data was acked". This isn't
strictly needed with the notification slots, but we've been pondering
disabling the slot support for 6.0 - and if we do, then we do require
the ordering to be sane. Regardless of that, it's the sane thing to
do in terms of API (Pavel)
- Minor cleanup for indentation and lockdep annotation (Pavel)
* tag 'io_uring-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
io_uring/net: save address for sendzc async execution
io_uring: conditional ->async_data allocation
io_uring/notif: order notif vs send CQEs
io_uring/net: fix indentation
io_uring/net: fix zc send link failing
io_uring/net: fix must_hold annotation
io_uring: fix submission-failure handling for uring-cmd
io_uring: fix off-by-one in sync cancelation file check
io_uring: uapi: Add `extern "C"` in io_uring.h for liburing
MAINTAINERS: Add `include/linux/io_uring_types.h`
Daniel borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).
The main changes are:
1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.
2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.
3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.
4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.
5) Fix range tracking for array poke descriptors, from Daniel Borkmann.
6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.
7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.
8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.
9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
-----BEGIN PGP SIGNATURE-----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=J5Fc
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes berg says:
====================
Various updates:
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_cgroup_iter_order is globally visible but the entries do not have
CGROUP prefix. As requested by Andrii, put a CGROUP in the names
in bpf_cgroup_iter_order.
This patch fixes two previous commits: one introduced the API and
the other uses the API in bpf selftest (that is, the selftest
cgroup_hierarchical_stats).
I tested this patch via the following command:
test_progs -t cgroup,iter,btf_dump
Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Fixes: 88886309d2 ("selftests/bpf: add a selftest for cgroup hierarchical stats collection")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220825223936.1865810-1-haoluo@google.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-08-24
1) Fix a refcount leak in __xfrm_policy_check.
From Xin Xiong.
2) Revert "xfrm: update SA curlft.use_time". This
violates RFC 2367. From Antony Antony.
3) Fix a comment on XFRMA_LASTUSED.
From Antony Antony.
4) x->lastused is not cloned in xfrm_do_migrate.
Fix from Antony Antony.
5) Serialize the calls to xfrm_probe_algs.
From Herbert Xu.
6) Fix a null pointer dereference of dst->dev on a metadata
dst in xfrm_lookup_with_ifid. From Nikolay Aleksandrov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent patch will render the kdoc from
include/uapi/linux/netlink.h into Documentation.
We need to fix the warnings. While at it move
the comments on struct nlmsghdr to a proper
kdoc comment.
Link: https://lore.kernel.org/r/20220819200221.422801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* replace 'syscall' with 'upper layers', still mention that it's being
exported via syscall errno
* describe what happens in set_retval(-EPERM) + return 1
* describe what happens with bind's 'return 3'
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-5-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, attaching BPF_PROG_TYPE_FLOW_DISSECTOR programs completely
replaces the flow-dissector logic with custom dissection logic. This
forces implementors to write programs that handle dissection for any
flows expected in the namespace.
It makes sense for flow-dissector BPF programs to just augment the
dissector with custom logic (e.g. dissecting certain flows or custom
protocols), while enjoying the broad capabilities of the standard
dissector for any other traffic.
Introduce BPF_FLOW_DISSECTOR_CONTINUE retcode. Flow-dissector BPF
programs may return this to indicate no dissection was made, and
fallback to the standard dissector is requested.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220821113519.116765-3-shmulik.ladkani@gmail.com
The DLM_LSFL_FS flag is set in lockspaces created directly
for a kernel user, as opposed to those lockspaces created
for user space applications. The user space libdlm allowed
this flag to be set for lockspaces created from user space,
but then used by a kernel user. No kernel user has ever
used this method, so remove the ability to do it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make it easy for liburing to integrate uapi header with the kernel.
Previously, when this header changes, the liburing side can't directly
copy this header file due to some small differences. Sync them.
Link: https://lore.kernel.org/io-uring/f1feef16-6ea2-0653-238f-4aaee35060b6@kernel.dk
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Facebook Kernel Team <kernel-team@fb.com>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a mechanism to retrieve basic status information about
the device, including the "supported" flag indicating whether
SED-OPAL is supported. The information returned is from the various
feature descriptors received during the discovery0 step, and so
this ioctl does nothing more than perform the discovery0 step
and then save the information received. See "struct opal_status"
and OPAL_FL_* bits for the status information currently returned.
This is necessary to be able to check whether a device is OPAL
enabled, set up, locked or unlocked from userspace programs
like systemd-cryptsetup and libcryptsetup. Right now we just
have to assume the user 'knows' or blindly attempt setup/lock/unlock
operations.
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new V4L2_EVENT_CTRL_CH_DIMENSIONS change flag that is issued
when the dimensions of an array change as a result of a
__v4l2_ctrl_modify_dimensions() call.
This will inform userspace that there are new dimensions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Expose MACSEC_SALT_LEN definition to user space to be
used in various user space applications such as iproute.
Iproute will use this as part of adding macsec extended
packet number support.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20220818153229.4721-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Partially revert 94dfc73e7c ("treewide: uapi: Replace zero-length arrays
with flexible-array members") given it breaks BPF UAPI.
For example, BPF CI run reveals build breakage under LLVM:
[...]
CLNG-BPF [test_maps] map_ptr_kern.o
CLNG-BPF [test_maps] btf__core_reloc_arrays___diff_arr_val_sz.o
CLNG-BPF [test_maps] test_bpf_cookie.o
progs/map_ptr_kern.c:314:26: error: field 'trie_key' with variable sized type 'struct bpf_lpm_trie_key' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct bpf_lpm_trie_key trie_key;
^
CLNG-BPF [test_maps] btf__core_reloc_type_based___diff.o
1 error generated.
make: *** [Makefile:521: /tmp/runner/work/bpf/bpf/tools/testing/selftests/bpf/map_ptr_kern.o] Error 1
make: *** Waiting for unfinished jobs....
[...]
Typical usage of the bpf_lpm_trie_key is that the struct gets embedded into
a user defined key for the LPM BPF map, from the selftest example:
struct bpf_lpm_trie_key { <-- UAPI exported struct
__u32 prefixlen;
__u8 data[];
};
struct lpm_key { <-- BPF program defined struct
struct bpf_lpm_trie_key trie_key;
__u32 data;
};
Undo this for BPF until a different solution can be found. It's the only flexible-
array member case in the UAPI header.
This was discovered in BPF CI after Dave reported that the include/uapi/linux/bpf.h
header was out of sync with tools/include/uapi/linux/bpf.h after 94dfc73e7c. And
the subsequent sync attempt failed CI.
Fixes: 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Reported-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/bpf/22aebc88-da67-f086-e620-dd4a16e2bc69@iogearbox.net
Fix variable names in some kerneldocs, naming in others.
Add kerneldocs for struct vring_desc and vring_interrupt.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20220810094004.1250-2-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Adding or removing room space _below_ layers 2 or 3, as the description
mentions, is ambiguous. This was written with a mental image of the
packet with layer 2 at the top, layer 3 under it, and so on. But it has
led users to believe that it was on lower layers (before the beginning
of the L2 and L3 headers respectively).
Let's make it more explicit, and specify between which layers the room
space is adjusted.
Reported-by: Rumen Telbizov <rumen.telbizov@menlosecurity.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220812153727.224500-3-quentin@isovalent.com
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
A little longer PR than usual but it's all fixes, no late features.
It's long partially because of timing, and partially because of
follow ups to stuff that got merged a week or so before the merge
window and wasn't as widely tested. Maybe the Bluetooth fixes are
a little alarming so we'll address that, but the rest seems okay
and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your
WiFi warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being
able to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps
some devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking
which may lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role
is not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index
(to silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C5Ck
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
The ioctl adds support for suspending the device from userspace.
This is a must before getting virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
After a successful return of the ioctl call the device must not process
more virtqueue descriptors. The device can answer to read or writes of
config fields as if it were not suspended. In particular, writing to
"queue_enable" with a value of 1 will not make the device start
processing buffers of the virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Userland knows if it can suspend the device or not by checking this feature
bit.
It's only offered if the vdpa driver backend implements the suspend()
operation callback, and to offer it or userland to ack it if the backend
does not offer that callback is an error.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-3-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces a new ioctl: VDUSE_IOTLB_GET_INFO to
support querying some information of IOVA regions.
Now it can be used to query whether the IOVA region
supports userspace memory registration.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220803045523.23851-6-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Introduce two ioctls: VDUSE_IOTLB_REG_UMEM and
VDUSE_IOTLB_DEREG_UMEM to support registering
and de-registering userspace memory for IOVA
regions.
Now it only supports registering userspace memory
for bounce buffer region in virtio-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220803045523.23851-5-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
New VirtIO network feature: VIRTIO_NET_F_NOTF_COAL.
Control a Virtio network device notifications coalescing parameters
using the control virtqueue.
A device that supports this fetature can receive
VIRTIO_NET_CTRL_NOTF_COAL control commands.
- VIRTIO_NET_CTRL_NOTF_COAL_TX_SET:
Ask the network device to change the following parameters:
- tx_usecs: Maximum number of usecs to delay a TX notification.
- tx_max_packets: Maximum number of packets to send before a
TX notification.
- VIRTIO_NET_CTRL_NOTF_COAL_RX_SET:
Ask the network device to change the following parameters:
- rx_usecs: Maximum number of usecs to delay a RX notification.
- rx_max_packets: Maximum number of packets to receive before a
RX notification.
VirtIO spec. patch:
https://lists.oasis-open.org/archives/virtio-comment/202206/msg00100.html
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20220718091102.498774-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Added VIRTIO_F_RING_RESET, it came from here
https://github.com/oasis-tcs/virtio-spec/issues/124https://github.com/oasis-tcs/virtio-spec/issues/139
This feature indicates that the driver can reset a queue individually.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-28-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add queue_notify_data in struct virtio_pci_common_cfg, which comes from
here https://github.com/oasis-tcs/virtio-spec/issues/89
In order not to affect the API, add a dedicated structure struct
virtio_pci_modern_common_cfg to virtio_pci_modern.h.
Since I want to add queue_reset after queue_notify_data, I submitted
this patch first.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-26-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Introduce a 'struct cxl_region' object with support for provisioning
and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYvLYmAAKCRDfioYZHlFs
Z0pbAQC/3j+WriWpU7CdhrnZI1Wqn+x5IIklF0Lc4/f6LwGZtAEAsSbLpItzvwqx
M/rcLaeLpwYlgvS1JjdsuQ2VQ7KOtAs=
=ehNT
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
Commit 50a896cf2d ("genetlink: properly support per-op policy dumping")
seems to have copy'n'pasted things a little incorrectly.
The #define CTRL_ATTR_MCAST_GRP_MAX should have stayed right
after the previous enum. The new CTRL_ATTR_POLICY_* needs
its own define for MAX and that max should not contain the
superfluous _DUMP in the name.
We probably can't do anything about the CTRL_ATTR_POLICY_DUMP_MAX
any more, there's likely code which uses it. For consistency
(*cough* codegen *cough*) let's add the correctly name define
nonetheless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/_IPT_LOG_H/_IP6T_LOG_H/
While at it add some surrounding space to ease reading.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 3dc6ffae2d ("timekeeping: Introduce fast accessor to clock tai")
introduced a fast and NMI-safe accessor for CLOCK_TAI. Especially in time
sensitive networks (TSN), where all nodes are synchronized by Precision Time
Protocol (PTP), it's helpful to have the possibility to generate timestamps
based on CLOCK_TAI instead of CLOCK_MONOTONIC. With a BPF helper for TAI in
place, it becomes very convenient to correlate activity across different
machines in the network.
Use cases for such a BPF helper include functionalities such as Tx launch
time (e.g. ETF and TAPRIO Qdiscs) and timestamping.
Note: CLOCK_TAI is nothing new per se, only the NMI-safe variant of it is.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
[Kurt: Wrote changelog and renamed helper]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220809060803.5773-2-kurt@linutronix.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Most tools which use bpf_get_stack or bpf_get_stackid symbolicate the
stack - meaning the stack of addresses in the target process' address
space is transformed into meaningful symbol names. The
BPF_F_USER_BUILD_ID flag eases this process by finding the build_id of
the file-backed vma which the address falls in and translating the
address to an offset within the backing file.
To be more specific, the offset is a "file offset" from the beginning of
the backing file. The symbols in ET_DYN ELF objects have a st_value
which is also described as an "offset" - but an offset in the process
address space, relative to the base address of the object.
It's necessary to translate between the "file offset" and "virtual
address offset" during symbolication before they can be directly
compared. Failure to do so can lead to confusing bugs, so this patch
clarifies language in the documentation in an attempt to keep this from
happening.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220808164723.3107500-1-davemarchevsky@fb.com
Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make the
tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also
included in here is the obligatory n_gsm updates from Daniel Starke and
lots of tiny driver updates and minor fixes and tweaks for other smaller
serial drivers.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYvD8qA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfEQCdGiYLQkWUUarhnlocHo+kSm5vkvsAnicZg7Sl
IQBeAidA3dZEQO0lLlM5
=t7Yh
-----END PGP SIGNATURE-----
Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
In this cycle, we mainly fixed some corner cases that manipulate a per-file
compression flag inappropriately. And, we found f2fs counted valid blocks in a
section incorrectly when zone capacity is set, and thus, fixed it with
additional sysfs entry to check it easily. Lastly, this series includes
several patches with respect to the new atomic write support such as a
couple of bug fixes and re-adding atomic_write_abort support that we removed
by mistake in the previous release.
Enhancement:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fix:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity checks.
-----BEGIN PGP SIGNATURE-----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=dJ41
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we mainly fixed some corner cases that manipulate a
per-file compression flag inappropriately. And, we found f2fs counted
valid blocks in a section incorrectly when zone capacity is set, and
thus, fixed it with additional sysfs entry to check it easily.
Lastly, this series includes several patches with respect to the new
atomic write support such as a couple of bug fixes and re-adding
atomic_write_abort support that we removed by mistake in the previous
release.
Enhancements:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic
latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fixes:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity
checks"
* tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: use onstack pages instead of pvec
f2fs: intorduce f2fs_all_cluster_page_ready
f2fs: clean up f2fs_abort_atomic_write()
f2fs: handle decompress only post processing in softirq
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
f2fs: do not set compression bit if kernel doesn't support
f2fs: remove device type check for direct IO
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
f2fs: fix to do sanity check on segment type in build_sit_entries()
f2fs: obsolete unused MAX_DISCARD_BLOCKS
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
f2fs: introduce sysfs atomic write statistics
f2fs: don't bother wait_ms by foreground gc
f2fs: invalidate meta pages only for post_read required inode
f2fs: allow compression of files without blocks
f2fs: fix to check inline_data during compressed inode conversion
f2fs: Delete f2fs_copy_page() and replace with memcpy_page()
f2fs: fix to invalidate META_MAPPING before DIO write
...
fatfs, autofs, squashfs, procfs, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
kwS/13j38guulSlXRzDLmitbg81zAAI=
=Zfum
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes few prerequisite updates and fixes to the
oldmem reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities,
but also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto test.
- Fix incorrect recovery of kretprobe modified return address in stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as well
as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYu4dRBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DnlAP45Sk4cE35T+Z0vdHE2f0uMXE/p
uHNjS3fDZOQVFJ2jZwEA99xPF5qPCttbR/b1VHsMSb30684IT1A4PC7y05kgfAw=
=jCc3
-----END PGP SIGNATURE-----
Merge tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
F2FS_IOC_ABORT_VOLATILE_WRITE was used to abort a atomic write before.
However it was removed accidentally. So revive it by changing the name,
since volatile write had gone.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Fiexes: 7bc155fec5b3("f2fs: kill volatile write support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pgNf
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
New support/Core
- Remove DMA_MEMCPY_SG for lack of users
- Tegra 234 dmaengine support
- Mediatek MT8365 dma support
- Apple ADMAC driver
Updates:
- Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma
- rz-dmac updates and device_synchronize support
- Bunch of typo in comments fixes in drivers
- multithread support in sf-pdma driver
-----BEGIN PGP SIGNATURE-----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=/IFO
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support / Core:
- Remove DMA_MEMCPY_SG for lack of users
- Tegra 234 dmaengine support
- Mediatek MT8365 dma support
- Apple ADMAC driver
Updates:
- Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma
- rz-dmac updates and device_synchronize support
- Bunch of typo in comments fixes in drivers
- multithread support in sf-pdma driver"
* tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits)
dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment
dmaengine: axi-dmac: check cache coherency register
dmaengine: sh: rz-dmac: Add device_synchronize callback
dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
dmaengine: tegra: Add terminate() for Tegra234
dt-bindings: dmaengine: Add compatible for Tegra234
dmaengine: xilinx: use strscpy to replace strlcpy
dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script
dmaengine: idxd: Correct IAX operation code names
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
dmaengine: dw-axi-dmac: ignore interrupt if no descriptor
dmaengine: dw-axi-dmac: do not print NULL LLI during error
dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions
dmaengine: imx-sdma: Add missing struct documentation
dmaengine: sf-pdma: Add multithread support for a DMA channel
dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
dmaengine: dmatest: use strscpy to replace strlcpy
dmaengine: ste_dma40: fix typo in comment
dmaengine: jz4780: fix typo in comment
dmaengine: s3c24xx: fix typo in comment
...
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution
-----BEGIN PGP SIGNATURE-----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=HQ9U
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
-----BEGIN PGP SIGNATURE-----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=AUYy
-----END PGP SIGNATURE-----
Merge tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Semi AR0521 sensor
- rkisp1 CSI code was split into a separate file
- sun6i has gained support for the A31 MIPI CSI-2 controller
- sun8i has gained support for the A83T MIPI CSI-2 controller
- vimc driver got support for virtual lens
- HEVC uAPI has gained its final form and got added to public headers
- hantro and cedrus got updates on H-265 support
- stkwebcam was promoted from staging
- atomisp staging driver got cleanups on its hmm and kmap related logic
- ov5640 gained support for more modes and got some rework
- imx7-media-csi staging driver got several improvements related to mc
API support
- uvcvideo now handles better power line control
- mediatec vcodec gained support for new hardware and got some codec
updates
- Lots of other bug fixes, improvements and cleanups.
* tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits)
media: hantro: Remove dedicated control documentation
hantro: Remove incorrect HEVC SPS validation
media: cedrus: hevc: Add check for invalid timestamp
media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling
media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl()
media: Documentation: mc-core: Fix typo
media: videodev2.h.rst.exceptions: add missing exceptions
media: vimc: wrong pointer is used with PTR_ERR
media: rkisp1: debug: Add dump file in debugfs for MI main path registers
media: rkisp1: Make the internal CSI-2 receiver optional
media: rkisp1: Add infrastructure to support ISP features
media: rkisp1: Support the ISP parallel input
media: dt-bindings: media: rkisp1: Add port for parallel interface
media: rkisp1: Use fwnode_graph_for_each_endpoint
media: rkisp1: csi: Plumb the CSI RX subdev
media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver
media: rkisp1: isp: Disallow multiple active sources
media: rkisp1: isp: Rename rkisp1_get_remote_source()
media: rkisp1: isp: Constify various local variables
media: rkisp1: isp: Fix whitespace issues
...
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
-----BEGIN PGP SIGNATURE-----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=sS1q
-----END PGP SIGNATURE-----
Merge tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings some long awaited changes, the send protocol bump,
otherwise lots of small improvements and fixes. The main core part is
reworking bio handling, cleaning up the submission and endio and
improving error handling.
There are some changes outside of btrfs adding helpers or updating
API, listed at the end of the changelog.
Features:
- sysfs:
- export chunk size, in debug mode add tunable for setting its size
- show zoned among features (was only in debug mode)
- show commit stats (number, last/max/total duration)
- send protocol updated to 2
- new commands:
- ability write larger data chunks than 64K
- send raw compressed extents (uses the encoded data ioctls),
ie. no decompression on send side, no compression needed on
receive side if supported
- send 'otime' (inode creation time) among other timestamps
- send file attributes (a.k.a file flags and xflags)
- this is first version bump, backward compatibility on send and
receive side is provided
- there are still some known and wanted commands that will be
implemented in the near future, another version bump will be
needed, however we want to minimize that to avoid causing
usability issues
- print checksum type and implementation at mount time
- don't print some messages at mount (mentioned as people asked about
it), we want to print messages namely for new features so let's
make some space for that
- big metadata - this has been supported for a long time and is
not a feature that's worth mentioning
- skinny metadata - same reason, set by default by mkfs
Performance improvements:
- reduced amount of reserved metadata for delayed items
- when inserted items can be batched into one leaf
- when deleting batched directory index items
- when deleting delayed items used for deletion
- overall improved count of files/sec, decreased subvolume lock
contention
- metadata item access bounds checker micro-optimized, with a few
percent of improved runtime for metadata-heavy operations
- increase direct io limit for read to 256 sectors, improved
throughput by 3x on sample workload
Notable fixes:
- raid56
- reduce parity writes, skip sectors of stripe when there are no
data updates
- restore reading from on-disk data instead of using stripe cache,
this reduces chances to damage correct data due to RMW cycle
- refuse to replay log with unknown incompat read-only feature bit
set
- zoned
- fix page locking when COW fails in the middle of allocation
- improved tracking of active zones, ZNS drives may limit the
number and there are ENOSPC errors due to that limit and not
actual lack of space
- adjust maximum extent size for zone append so it does not cause
late ENOSPC due to underreservation
- mirror reading error messages show the mirror number
- don't fallback to buffered IO for NOWAIT direct IO writes, we don't
have the NOWAIT semantics for buffered io yet
- send, fix sending link commands for existing file paths when there
are deleted and created hardlinks for same files
- repair all mirrors for profiles with more than 1 copy (raid1c34)
- fix repair of compressed extents, unify where error detection and
repair happen
Core changes:
- bio completion cleanups
- don't double defer compression bios
- simplify endio workqueues
- add more data to btrfs_bio to avoid allocation for read requests
- rework bio error handling so it's same what block layer does,
the submission works and errors are consumed in endio
- when asynchronous bio offload fails fall back to synchronous
checksum calculation to avoid errors under writeback or memory
pressure
- new trace points
- raid56 events
- ordered extent operations
- super block log_root_transid deprecated (never used)
- mixed_backref and big_metadata sysfs feature files removed, they've
been default for sufficiently long time, there are no known users
and mixed_backref could be confused with mixed_groups
Non-btrfs changes, API updates:
- minor highmem API update to cover const arguments
- switch all kmap/kmap_atomic to kmap_local
- remove redundant flush_dcache_page()
- address_space_operations::writepage callback removed
- add bdev_max_segments() helper"
* tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits)
btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read
btrfs: fix repair of compressed extents
btrfs: remove the start argument to check_data_csum and export
btrfs: pass a btrfs_bio to btrfs_repair_one_sector
btrfs: simplify the pending I/O counting in struct compressed_bio
btrfs: repair all known bad mirrors
btrfs: merge btrfs_dev_stat_print_on_error with its only caller
btrfs: join running log transaction when logging new name
btrfs: simplify error handling in btrfs_lookup_dentry
btrfs: send: always use the rbtree based inode ref management infrastructure
btrfs: send: fix sending link commands for existing file paths
btrfs: send: introduce recorded_ref_alloc and recorded_ref_free
btrfs: zoned: wait until zone is finished when allocation didn't progress
btrfs: zoned: write out partially allocated region
btrfs: zoned: activate necessary block group
btrfs: zoned: activate metadata block group on flush_space
btrfs: zoned: disable metadata overcommit for zoned
btrfs: zoned: introduce space_info->active_total_bytes
btrfs: zoned: finish least available block group on data bg allocation
btrfs: let can_allocate_chunk return error
...
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
Add one new ublk command: UBLK_IO_NEED_GET_DATA. It is prepared for a new
feature designed for a user application who wants to allocate IO buffer
and set IO buffer address only after it receives an IO request from
ublksrv.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/c8a64b6b51c78340da7daa9e1054608695e79619.1659011443.git.ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all block device related info from ublksrv_ctrl_dev_info,
meantime reduce its size into 64 bytes because:
1) ublksrv_ctrl_dev_info becomes cleaner without including any
block related info
2) generic set/get parameter command can be used to set block
related setting easily and cleanly
3) generic set/get parameter command can be used for extending
ublk without needing more info in ublksrv_ctrl_dev_info
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two commands to set/get parameters generically.
One important goal of ublk is to provide generic framework for making
block device by userspace flexibly.
As one generic block device, there are still lots of block parameters,
such as max_sectors, write_cache/fua, discard related limits,
zoned parameters, ...., so this patch starts to add generic mechanism
for set/get device parameters.
Both generic block parameters(all kinds of queue settings) and ublk
feature parameters can be covered with this way, then it becomes quite
easy to extend in future.
Add two parameter types are used so far: basic(covers basic queue setting
and misc settings which can't be grouped easily) and discard, basic type
must be set, and discard type becomes optional now
This way provides mechanism to simulate any kind of generic block device
from userspace easily, from both block queue setting viewpoint or ublk
feature viewpoint.
The style of putting all parameters together is suggested by Christoph.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays
with flexible-array members in UAPI. This patch has been baking in
linux-next for 5 weeks now.
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=8yMq
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull uapi flexible array update from Gustavo Silva:
"A treewide patch that replaces zero-length arrays with flexible-array
members in UAPI. This has been baking in linux-next for 5 weeks now.
'-fstrict-flex-arrays=3' is coming and we need to land these changes
to prevent issues like these in the short future:
fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly
zero. If this breaks anything, we can use a union with a new member
name"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
* tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: uapi: Replace zero-length arrays with flexible-array members
API:
- Make proc files report fips module name and version.
Algorithms:
- Move generic SHA1 code into lib/crypto.
- Implement Chinese Remainder Theorem for RSA.
- Remove blake2s.
- Add XCTR with x86/arm64 acceleration.
- Add POLYVAL with x86/arm64 acceleration.
- Add HCTR2.
- Add ARIA.
Drivers:
- Add support for new CCP/PSP device ID in ccp.
-----BEGIN PGP SIGNATURE-----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=rfWK
-----END PGP SIGNATURE-----
Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
- Fix Sparse warnings with randomizd kstack (GONG, Ruiqi)
- Replace uintptr_t with unsigned long in usercopy (Jason A. Donenfeld)
- Fix Clang -Wforward warning in LKDTM (Justin Stitt)
- Fix comment to correctly refer to STRICT_DEVMEM (Lukas Bulwahn)
- Introduce dm-verity binding logic to LoadPin LSM (Matthias Kaehlcke)
- Clean up warnings and overflow and KASAN tests (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=FRS3
-----END PGP SIGNATURE-----
Merge tag 'hardening-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Fix Sparse warnings with randomizd kstack (GONG, Ruiqi)
- Replace uintptr_t with unsigned long in usercopy (Jason A. Donenfeld)
- Fix Clang -Wforward warning in LKDTM (Justin Stitt)
- Fix comment to correctly refer to STRICT_DEVMEM (Lukas Bulwahn)
- Introduce dm-verity binding logic to LoadPin LSM (Matthias Kaehlcke)
- Clean up warnings and overflow and KASAN tests (Kees Cook)
* tag 'hardening-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
dm: verity-loadpin: Drop use of dm_table_get_num_targets()
kasan: test: Silence GCC 12 warnings
drivers: lkdtm: fix clang -Wformat warning
x86: mm: refer to the intended config STRICT_DEVMEM in a comment
dm: verity-loadpin: Use CONFIG_SECURITY_LOADPIN_VERITY for conditional compilation
LoadPin: Enable loading from trusted dm-verity devices
dm: Add verity helpers for LoadPin
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
lib: overflow: Do not define 64-bit tests on 32-bit
MAINTAINERS: Add a general "kernel hardening" section
usercopy: use unsigned long instead of uintptr_t
being split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmLoAAUACgkQxSPxCi2d
A1rFUAf/RnLkzNPS1QJ1uVbiiW64zQUD2o5U8kAliOZxoXQ45U+CgL22a5VaT2R+
rI9+YSg/VX9YkdJwB6I+y7VRWjUCO3NfYOfQUX5NS8GfcPQQn2Zp+jy3t8VnjjXN
5+8Ylu5tX1+QSQiBB9JvIgiK71rSorT6H+KF6bZypL7te5kj39hDaRbmh40VOMOY
QWfs8DmyJft9IHPG7Mku/rFJbdVJph3f31IoqUOoGTOKoDPDUDezhCVHi2vpFcV+
S+iCKkeXmP6eUdCnNzBreYPTcP9OtCvkZEPhFg4lh+jyhjyFq1o0B8G5cRo5jvgr
GcN1GUT040sSqNXFquA4UU6RGvaxlg==
=gBRJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
-----BEGIN PGP SIGNATURE-----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=vSwm
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring zerocopy support from Jens Axboe:
"This adds support for efficient support for zerocopy sends through
io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and
UDP.
The core network changes to support this is in a stable branch from
Jakub that both io_uring and net-next has pulled in, and the io_uring
changes are layered on top of that.
All of the work has been done by Pavel"
* tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits)
io_uring: notification completion optimisation
io_uring: export req alloc from core
io_uring/net: use unsigned for flags
io_uring/net: make page accounting more consistent
io_uring/net: checks errors of zc mem accounting
io_uring/net: improve io_get_notif_slot types
selftests/io_uring: test zerocopy send
io_uring: enable managed frags with register buffers
io_uring: add zc notification flush requests
io_uring: rename IORING_OP_FILES_UPDATE
io_uring: flush notifiers after sendzc
io_uring: sendzc with fixed buffers
io_uring: allow to pass addr into sendzc
io_uring: account locked pages for non-fixed zc
io_uring: wire send zc request type
io_uring: add notification slot registration
io_uring: add rsrc referencing for notifiers
io_uring: complete notifiers in tw
io_uring: cache struct io_notif
io_uring: add zc notification infrastructure
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLkm5gQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpmKMD/4l3QIrLbjYIxlfrzQcHbmYuUkbQtj3SbZg
6ejbnGVhCs1P9DdXH8MgE2BxgpiXQE0CqOK7vbSoo5ep2n2UTLI2DIxAl74SMIo7
0wmJXtUJySuViKr3NYVHqlN180MkQYddBz0nGElhkQBPBCMhW8CrtPCeURr/YyHp
2RxSYBXiUx2gRyig+klnp6oPEqelcBZJUyNHdA9yVrgl/RhB/t2rKj7D++8ukQM3
Zuyh8WIkTeTfUz9hdGG7fuCEdZN4DlO2CCEc7uy0cKi6VRCKH4hYUCqClJ+/cfd2
43dUI2O7B6D1t/ObFh8AGIDXBDqVA6ePQohQU6gooRkfQiBPKkc9d0ts4yIhRqca
AjkzNM+0Eve3A01loJ8J84w8oZnvNpYEv5n8/sZVLWcyU3UIs0I88nC2OBiFtoRq
d77CtFLwOTo+r3STtAhnZOqez90rhS6BqKtqlUP346PCuFItl6/MbGtwdTbLYEFj
CVNIb2pERWSr2NxGv4lFyXaX/cRwruxojWH7yc3rRYjr4Ykevd1pe/fMGNiMAnKw
5em/3QU3qq0ZVcXLMihksKeHHFIQwGDRMuyuv/fktV10+yYXQ0t16WzkJT3aR8Xo
cqs0r8+6Jnj3uYcOMzj/FoLcpEPr21hnwAtzLto1mG1Wh4JRn/D7Nx5zqxPLxcW+
NiU6VihPOw==
=gxeV
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- As per (valid) complaint in the last merge window, fs/io_uring.c has
grown quite large these days. io_uring isn't really tied to fs
either, as it supports a wide variety of functionality outside of
that.
Move the code to io_uring/ and split it into files that either
implement a specific request type, and split some code into helpers
as well. The code is organized a lot better like this, and io_uring.c
is now < 4K LOC (me).
- Deprecate the epoll_ctl opcode. It'll still work, just trigger a
warning once if used. If we don't get any complaints on this, and I
don't expect any, then we can fully remove it in a future release
(me).
- Improve the cancel hash locking (Hao)
- kbuf cleanups (Hao)
- Efficiency improvements to the task_work handling (Dylan, Pavel)
- Provided buffer improvements (Dylan)
- Add support for recv/recvmsg multishot support. This is similar to
the accept (or poll) support for have for multishot, where a single
SQE can trigger everytime data is received. For applications that
expect to do more than a few receives on an instantiated socket, this
greatly improves efficiency (Dylan).
- Efficiency improvements for poll handling (Pavel)
- Poll cancelation improvements (Pavel)
- Allow specifiying a range for direct descriptor allocations (Pavel)
- Cleanup the cqe32 handling (Pavel)
- Move io_uring types to greatly cleanup the tracing (Pavel)
- Tons of great code cleanups and improvements (Pavel)
- Add a way to do sync cancelations rather than through the sqe -> cqe
interface, as that's a lot easier to use for some use cases (me).
- Add support to IORING_OP_MSG_RING for sending direct descriptors to a
different ring. This avoids the usually problematic SCM case, as we
disallow those. (me)
- Make the per-command alloc cache we use for apoll generic, place
limits on it, and use it for netmsg as well (me).
- Various cleanups (me, Michal, Gustavo, Uros)
* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
io_uring: ensure REQ_F_ISREG is set async offload
net: fix compat pointer in get_compat_msghdr()
io_uring: Don't require reinitable percpu_ref
io_uring: fix types in io_recvmsg_multishot_overflow
io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
io_uring: support multishot in recvmsg
net: copy from user before calling __get_compat_msghdr
net: copy from user before calling __copy_msghdr
io_uring: support 0 length iov in buffer select in compat
io_uring: fix multishot ending when not polled
io_uring: add netmsg cache
io_uring: impose max limit on apoll cache
io_uring: add abstraction around apoll cache
io_uring: move apoll cache to poll.c
io_uring: consolidate hash_locked io-wq handling
io_uring: clear REQ_F_HASH_LOCKED on hash removal
io_uring: don't race double poll setting REQ_F_ASYNC_DATA
io_uring: don't miss setting REQ_F_DOUBLE_POLL
io_uring: disable multishot recvmsg
io_uring: only trace one of complete or overflow
...
These drivers are rather uncomfortably hammered into the
address_space_operations hole. They aren't filesystems and don't behave
like filesystems. They just need their own movable_operations structure,
which we can point to directly from page->mapping.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
- Fix Intel Alder Lake PEBS memory access latency & data source profiling info bugs.
- Use Intel large-PEBS hardware feature in more circumstances, to reduce
PMI overhead & reduce sampling data.
- Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI variant,
which tells tooling the exact number of samples lost.
- Add new IBS register bits definitions.
- AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DqaA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Fix Intel Alder Lake PEBS memory access latency & data source
profiling info bugs.
- Use Intel large-PEBS hardware feature in more circumstances, to
reduce PMI overhead & reduce sampling data.
- Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI
variant, which tells tooling the exact number of samples lost.
- Add new IBS register bits definitions.
- AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements.
* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/ibs: Add new IBS register bits into header
perf/x86/intel: Fix PEBS data source encoding for ADL
perf/x86/intel: Fix PEBS memory access info encoding for ADL
perf/core: Add a new read format to get a number of lost samples
perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
perf/x86/amd/uncore: Add PerfMonV2 DF event format
perf/x86/amd/uncore: Detect available DF counters
perf/x86/amd/uncore: Use attr_update for format attributes
perf/x86/amd/uncore: Use dynamic events array
x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
Pull fsnotify updates from Jan Kara:
- support for FAN_MARK_IGNORE which untangles some of the not well
defined corner cases with fanotify ignore masks
- small cleanups
* tag 'fsnotify_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix comment typo
fanotify: introduce FAN_MARK_IGNORE
fanotify: cleanups for fanotify_mark() input validations
fanotify: prepare for setting event flags in ignore mask
fs: inotify: Fix typo in inotify comment
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
We add an extensible CSR emulation framework which is based upon the
existing system instruction emulation. This will be useful to upcoming
AIA, PMU, Nested and other virtualization features.
The CSR emulation framework also has provision to emulate CSR in user
space but this will be used only in very specific cases such as AIA
IMSIC CSR emulation in user space or vendor specific CSR emulation
in user space.
By default, all CSRs not handled by KVM RISC-V will be redirected back
to Guest VCPU as illegal instruction trap.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The SRv6 H.L2Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.L2Encaps behavior [2].
H.L2Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.4
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.3
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.Encaps behavior [2].
H.Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a framework for running selftests.
Framework exposes devlink commands and test suite(s) to the user
to execute and query the supported tests by the driver.
Below are new entries in devlink_nl_ops
devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported
selftests by the drivers.
devlink_nl_cmd_selftests_run: To execute selftests. Users can
provide a test mask for executing group tests or standalone tests.
Documentation/networking/devlink/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
introduced the optimization to _not_ perform bio_associate_blkg()'s
relatively costly work when DM core clones its bio. But in doing so it
exposed the possibility for DM's cloned bio to alter DM target
behavior (e.g. crash) if a target were to issue IO without first
calling bio_set_dev().
The DM raid target can trigger an MD crash due to its need to split
the DM bio that is passed to md_handle_request(). The split will
recurse to submit_bio_noacct() using a bio with an uninitialized
->bi_blkg. This NULL bio->bi_blkg causes blk_throtl_bio() to
dereference a NULL blkg_to_tg(bio->bi_blkg).
Fix this in DM core by adding a new 'needs_bio_set_dev' target flag that
will make alloc_tio() call bio_set_dev() on behalf of the target.
dm-raid is the only target that requires this flag. bio_set_dev()
initializes the DM cloned bio's ->bi_blkg, using bio_associate_blkg,
before passing the bio to md_handle_request().
Long-term fix would be to audit and refactor MD code to rely on DM to
split its bio, using dm_accept_partial_bio(), but there are MD raid
personalities (e.g. raid1 and raid10) whose implementation are tightly
coupled to handling the bio splitting inline.
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The type NT_S390_PV_CPU_DATA note contains the encrypted CPU state of
a PV VCPU. It's only relevant in dumps of s390 PV VMs and can't be
decrypted without a second block of encrypted data which provides key
parts. Therefore we only reserve the note type here.
The zgetdump tool from the s390-tools package can, together with a
Customer Communication Key, be used to convert a PV VM dump into a
normal VM dump. zgetdump will decrypt the CPU data and overwrite the
other respective notes to make the data accessible for crash and other
debugging tools.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
[agordeev@linux.ibm.com changed desctiption]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Nguyen says:
====================
ice: PPPoE offload support
Marcin Szycik says:
Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.
Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields (will be submitted
soon).
ICE COMMS DDP package is required to create a filter in ice.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for PPPoE hardware offload
flow_offload: Introduce flow_match_pppoe
net/sched: flower: Add PPPoE filter
flow_dissector: Add PPPoE dissectors
====================
Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For the purpose of exposing device info and allow flash update which is
going to be implemented in follow-up patches, introduce a possibility
for a line card to expose relation to nested devlink entity. The nested
devlink entity represents the line card.
Example:
$ devlink lc show pci/0000:01:00.0 lc 1
pci/0000:01:00.0:
lc 1 state active type 16x100G nested_devlink auxiliary/mlxsw_core.lc.0
supported_types:
16x100G
$ devlink dev show auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for PPPoE specific fields for tc-flower.
Those fields can be provided only when protocol was set
to ETH_P_PPP_SES. Defines, dump, load and set are being done here.
Overwrite basic.n_proto only in case of PPP_IP and PPP_IPV6,
otherwise leave it as ETH_P_PPP_SES.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Third set of patches for v5.20. MLO work continues and we have a lot
of stack changes due to that, including driver API changes. Not much
driver patches except on mt76.
Major changes:
cfg80211/mac80211
* more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support,
works with one link now
* align with IEEE Draft P802.11be_D2.0
* hardware timestamps for receive and transmit
mt76
* preparation for new chipset support
* ACPI SAR support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmLe1k4RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvxlQf8DrZIllhF0q/7Wry3JuG0gbNA+V2eI/lc
OYrephsDBm/dvvyjcFWcdUzxoNk0k1+aOrx/09JijHFgCGKVwuK1+hxYVfjW2q43
9mHxJBo4NcMk1RDDM3paVuZ8QMHuYugbv2mQOZeAEq2XloAaqEM7wVE+bb4Mgtgx
VAKS5du2igrSt83wl8BRMFb9MPAM1EQ3Cw7Ro5T4y+1Qm/hrBm6qWizSpqh9CXYx
pDLR3pvQxiD4Axa0Uq3rUbyF4hLwciqSFOJvr2sI3q7b9YElA7wIi6NQzMkYJH6Z
7HW5K6UIQbblAaQkv2BLqpU1N6puTHUOAf5Md31vOAaOcGbSI5hbUA==
=Cnxg
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.20
Third set of patches for v5.20. MLO work continues and we have a lot
of stack changes due to that, including driver API changes. Not much
driver patches except on mt76.
Major changes:
cfg80211/mac80211
- more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support,
works with one link now
- align with IEEE Draft P802.11be_D2.0
- hardware timestamps for receive and transmit
mt76
- preparation for new chipset support
- ACPI SAR support
* tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits)
wifi: mac80211: fix link data leak
wifi: mac80211: mlme: fix disassoc with MLO
wifi: mac80211: add macros to loop over active links
wifi: mac80211: remove erroneous sband/link validation
wifi: mac80211: mlme: transmit assoc frame with address translation
wifi: mac80211: verify link addresses are different
wifi: mac80211: rx: track link in RX data
wifi: mac80211: optionally implement MLO multicast TX
wifi: mac80211: expand ieee80211_mgmt_tx() for MLO
wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API
wifi: mac80211: report link ID to cfg80211 on mgmt RX
wifi: cfg80211: report link ID in NL80211_CMD_FRAME
wifi: mac80211: add hardware timestamps for RX and TX
wifi: cfg80211: add hardware timestamps to frame RX info
wifi: cfg80211/nl80211: move rx management data into a struct
wifi: cfg80211: add a function for reporting TX status with hardware timestamps
wifi: nl80211: add RX and TX timestamp attributes
wifi: ieee80211: add helper functions for detecting TM/FTM frames
wifi: mac80211_hwsim: handle links for wmediumd/virtio
wifi: mac80211: sta_info: fix link_sta insertion
...
====================
Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the new support is implemented, allow the ioctl to accept v2
and the compressed flag, and update the version in sysfs.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds the definitions of the new commands for send stream version 2
and their respective attributes: fallocate, FS_IOC_SETFLAGS (a.k.a.
chattr), and encoded writes. It also documents two changes to the send
stream format in v2: the receiver shouldn't assume a maximum command
size, and the DATA attribute is encoded differently to allow for writes
larger than 64k. These will be implemented in subsequent changes, and
then the ioctl will accept the new version and flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-07-20
1) Don't set DST_NOPOLICY in IPv4, a recent patch made this
superfluous. From Eyal Birger.
2) Convert alg_key to flexible array member to avoid an iproute2
compile warning when built with gcc-12.
From Stephen Hemminger.
3) xfrm_register_km and xfrm_unregister_km do always return 0
so change the type to void. From Zhengchao Shao.
4) Fix spelling mistake in esp6.c
From Zhang Jiaming.
5) Improve the wording of comment above XFRM_OFFLOAD flags.
From Petr Vaněk.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add defines for the serial-state bitmap values from section 6.3.5
SerialState of the CDC specification version 1.1.
Note that the bTxCarrier and bRxCarrier bits have been named after their
RS-232 signal equivalents DSR and DCD.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220725075841.1187-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add defines for the Control Signal Bitmap Values from section 6.2.14
SetControlLineState of the CDC specification version 1.1.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220725075841.1187-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overlay notification control onto IORING_OP_RSRC_UPDATE (former
IORING_OP_FILES_UPDATE). It allows to flush a range of zc notifications
from slots with indexes [sqe->off, sqe->off+sqe->len). If sqe->arg is
not zero, it also copies sqe->arg as a new tag for all flushed
notifications.
Note, it doesn't flush a notification of a slot if there was no requests
attached to it (since last flush or registration).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/df13e2363400682a73dd9e71c3b990b8d1ff0333.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow zerocopy sends to use fixed buffers. There is an optimisation for
this case, the network layer don't need to reference the pages, see
SKBFL_MANAGED_FRAG_REFS, so io_uring have to ensure validity of fixed
buffers until the notifier is released.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1d8bd1b5934e541d90c1824eb4020ae3f5f43f3.1657643355.git.asml.silence@gmail.com
[axboe: fold in 32-bit pointer cast warning fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new io_uring opcode IORING_OP_SENDZC. The main distinction from
IORING_OP_SEND is that the user should specify a notification slot
index in sqe::notification_idx and the buffers are safe to reuse only
when the used notification is flushed and completes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a80387c6a68ce9cf99b3b6ef6f71068468761fb7.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similar to multishot recv, this will require provided buffers to be
used. However recvmsg is much more complex than recv as it has multiple
outputs. Specifically flags, name, and control messages.
Support this by introducing a new struct io_uring_recvmsg_out with 4
fields. namelen, controllen and flags match the similar out fields in
msghdr from standard recvmsg(2), payloadlen is the length of the payload
following the header.
This struct is placed at the start of the returned buffer. Based on what
the user specifies in struct msghdr, the next bytes of the buffer will be
name (the next msg_namelen bytes), and then control (the next
msg_controllen bytes). The payload will come at the end. The return value
in the CQE is the total used size of the provided buffer.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220714110258.1336200-4-dylany@fb.com
[axboe: style fixups, see link]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support multishot receive for io_uring.
Typical server applications will run a loop where for each recv CQE it
requeues another recv/recvmsg.
This can be simplified by using the existing multishot functionality
combined with io_uring's provided buffers.
The API is to add the IORING_RECV_MULTISHOT flag to the SQE. CQEs will
then be posted (with IORING_CQE_F_MORE flag set) when data is available
and is read. Once an error occurs or the socket ends, the multishot will
be removed and a completion without IORING_CQE_F_MORE will be posted.
The benefit to this is that the recv is much more performant.
* Subsequent receives are queued up straight away without requiring the
application to finish a processing loop.
* If there are more data in the socket (sat the provided buffer size is
smaller than the socket buffer) then the data is immediately
returned, improving batching.
* Poll is only armed once and reused, saving CPU cycles
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630091231.1456789-11-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
From recently io_uring provides an option to allocate a file index for
operation registering fixed files. However, it's utterly unusable with
mixed approaches when for a part of files the userspace knows better
where to place it, as it may race and users don't have any sane way to
pick a slot and hoping it will not be taken.
Let the userspace to register a range of fixed file slots in which the
auto-allocation happens. The use case is splittting the fixed table in
two parts, where on of them is used for auto-allocation and another for
slot-specified operations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66ab0394e436f38437cf7c44676e1920d09687ad.1656154403.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With IORING_OP_MSG_RING, one ring can send a message to another ring.
Extend that support to also allow sending a fixed file descriptor to
that ring, enabling one ring to pass a registered descriptor to another
one.
Arguments are extended to pass in:
sqe->addr3 fixed file slot in source ring
sqe->file_index fixed file slot in destination ring
IORING_OP_MSG_RING is extended to take a command argument in sqe->addr.
If set to zero (or IORING_MSG_DATA), it sends just a message like before.
If set to IORING_MSG_SEND_FD, a fixed file descriptor is sent according
to the above arguments.
Two common use cases for this are:
1) Server needs to be shutdown or restarted, pass file descriptors to
another onei
2) Backend is split, and one accepts connections, while others then get
the fd passed and handle the actual connection.
Both of those are classic SCM_RIGHTS use cases, and it's not possible to
support them with direct descriptors today.
By default, this will post a CQE to the target ring, similarly to how
IORING_MSG_DATA does it. If IORING_MSG_RING_CQE_SKIP is set, no message
is posted to the target ring. The issuer is expected to notify the
receiver side separately.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io_uring cancelation API is async, like any other API that we expose
there. For the case of finding a request to cancel, or not finding one,
it is fully sync in that when submission returns, the CQE for both the
cancelation request and the targeted request have been posted to the
CQ ring.
However, if the targeted work is being executed by io-wq, the API can
only start the act of canceling it. This makes it difficult to use in
some circumstances, as the caller then has to wait for the CQEs to come
in and match on the same cancelation data there.
Provide a IORING_REGISTER_SYNC_CANCEL command for io_uring_register()
that does sync cancelations, always. For the io-wq case, it'll wait
for the cancelation to come in before returning. The only expected
returns from this API is:
0 Request found and canceled fine.
> 0 Requests found and canceled. Only happens if asked to
cancel multiple requests, and if the work wasn't in
progress.
-ENOENT Request not found.
-ETIME A timeout on the operation was requested, but the timeout
expired before we could cancel.
and we won't get -EALREADY via this API.
If the timeout value passed in is -1 (tv_sec and tv_nsec), then that
means that no timeout is requested. Otherwise, the timespec passed in
is the amount of time the sync cancel will wait for a successful
cancelation.
Link: https://github.com/axboe/liburing/discussions/608
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for not having a request to pass in that carries this
state, add a separate cancelation flag that allows the caller to ask
for a fixed file for cancelation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new IORING_SETUP_SINGLE_ISSUER flag and the userspace visible part
of it, i.e. put limitations of submitters. Also, don't allow it together
with IOPOLL as we're not going to put it to good use.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4bcc41ee467fdf04c8aab8baf6ce3ba21858c3d4.1655371007.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, the POLL_ADD command does edge triggered poll - if we get
a non-zero mask on the initial poll attempt, we complete the request
successfully.
Support level triggered by always waiting for a notification, regardless
of whether or not the initial mask matches the file state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Fix use of sched_setaffinity in selftests
* Sync kernel headers to tools
* Fix KVM_STATS_UNIT_MAX
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLaTFwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5Dwf/bRHhFs7XXdC5YU687bEFq/8/XCbY
wczM6cEIsWk0chzx92xIXzjb6DKPhrUFjGNH2C55XhLwHhCCUI+Q0zCfZ89ghjdX
Fe3fNcs6SAq6aLPjRBkk0+vt1jq233KzIV/GQJ5FivocPlWX562FXVEXoB/T26Ml
ljTmtPBn4Hd+LIE+7+HED2qCNzvNYtx3KGGTsZR7hcjoQmfFjXg+OTN0Uqsa+enW
lCEcN/gDMaTWFxY7lII63IJA4mE4WkdfYWjzuzvfUFsNU0IQZk+NrVZpiAP9zXeS
20o9nzetS7h1enLWqdGvJ+m5ot19l24nJeWZ8QQsS3T4XF2h7vL0lY/WBg==
=BDnJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
Daniel Borkmann says:
====================
bpf-next 2022-07-22
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Userspace may support more features or new added flags, but the driver
side can be old, so make sure correct flags(features) returned to
userpsace, then userspace can work as expected.
Also mark the 2nd flags as reversed, just use the 1st one. When we run
out of flags, the reserved one can be handled at that time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow optionally specifying the link ID to transmit on,
which can be done instead of the link frequency, on an
MLD addressed frame. Both can also be omitted in which
case the frame must be MLD addressed and link selection
(and address translation) will be done on lower layers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add attributes for reporting hardware timestamps for management frames
RX and TX. These attributes will be used for reporting hardware
timestamps for Timing measurement and Fine Timing Measurement action
frames, which will allow userspace applications to measure the path
delay between devices and sync clocks.
For TX, these attributes are used for reporting the frame RX time and
the ack TX time. For TX, they are used for reporting the frame TX time
and the ack RX time.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clarify the link ID behaviour in control port TX, we need it
to select the link to transmit on for both MLD and non-MLD
receivers, but select the link address as the SA only if the
receiver is not an MLD.
Fixes: 67207bab93 ("wifi: cfg80211/mac80211: Support control port TX from specific link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
REQ_PREFLUSH is turned into REQ_OP_FLUSH by the flush state machine
and thus never seen by a blk-mq based driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some IAX operation code nomenclatures are misleading or don't match with
others:
1. Operation code 0x4c is Zero Compress 32. IAX_OPCODE_DECOMP_32 is a
misleading name. Change it to IAX_OPCODE_ZERO_COMP_32.
2. Operation code 0x4d is Zero Compress 16. IAX_OPCODE_DECOMP_16 is a
misleading name. Change it to IAX_OPCODE_ZERO_COMP_16.
3. IAX_OPCDE_FIND_UNIQUE is corrected to match with other nomenclatures.
Co-developed-by: Li Zhang <li4.zhang@intel.com>
Signed-off-by: Li Zhang <li4.zhang@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220707002052.1546361-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.
To migrate the MTCR, we give userland the possibility to
query the MTCR state.
We indicate KVM support for the CPU topology facility with a new
KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com>
Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/
[frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Currently, drivers are using magic numbers to derive the CAN error
states from the error counter. Add three macro declarations to
remediate this.
For reference, the error-active, error-passive and bus-off are defined
in ISO 11898, section 12.1.4.2 "Error counting". Although ISO 11898
does not define error-warning state, this extra value is also commonly
used and is thus also added.
Link: https://lore.kernel.org/all/20220719143550.3681-13-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a dedicated flag in uapi/linux/can/error.h to notify the userland
that fields data[6] and data[7] of the CAN error frame were
respectively populated with the tx and rx error counters.
For all driver tree-wide, set up this flags whenever needed.
Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.
As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.
This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.
Fixes: 0d66548a10 ("[CAN]: Add PF_CAN core module")
Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based
mailbox with standard protocol discovery. Each mailbox is accessed
through a DOE Extended Capability.
Each DOE mailbox must support the DOE discovery protocol in addition to
any number of additional protocols.
Define core PCIe functionality to manage a single PCIe DOE mailbox at a
defined config space offset. Functionality includes iterating,
creating, query of supported protocol, and task submission. Destruction
of the mailboxes is device managed.
Cc: "Li, Ming" <ming4.li@intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220719205249.566684-4-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 1b870fa557 ("kvm: stats: tell userspace which values are
boolean") added a new stat unit (boolean) but failed to raise
KVM_STATS_UNIT_MAX.
Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN.
Fixes: 1b870fa557 ("kvm: stats: tell userspace which values are boolean")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220719125229.2934273-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ublk protocol has no mechanism to actually transfer the integrity
metadata, so don't define this flag, which requires that an integrity
payload is attached to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220718063013.335531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR.
Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of
SMC-R link group.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- a fix in Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCYtOWgQAKCRBAj56VGEWX
nIWKAQDT8CvjM907JZfLnMbDTh7zHio12a9NvQa5FsWYub9IDgEA1Vknk760mECG
MJjTT2SPu2IYF5oAxlp4mL5HJSUzXAY=
=iHE3
-----END PGP SIGNATURE-----
Merge tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
* tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document the units for resolution of size axes
Input: goodix - call acpi_device_fix_up_power() in some cases
Input: wm97xx - make .remove() obviously always return 0
Input: usbtouchscreen - add driver_info sanity check
Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- long time bug in pty_write() that has been reported in the
past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYtJZSg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymDUQCfbfzfsMweUSiEjcfENNV4o52o3JgAn3MudgIV
y1gogwEVkYK6q5itgi3W
=ZAlt
-----END PGP SIGNATURE-----
Merge tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Fix missing PAGE_PFN_MASK
* Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
* Fix for nested virtualization when TSC scaling is active
* Estimate the size of fastcc subroutines conservatively, avoiding disastrous
underestimation when return thunks are enabled
* Avoid possible use of uninitialized fields of 'struct kvm_lapic_irq'
Generic:
* Mark as such the boolean values available from the statistics file descriptors
* Clarify statistics documentation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLRVkcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMm4QgAgZHQTSyA4+/xOYs0cBX2Q6YYkDGG
yUTjiiLmXjzKmjRkfhqKO75aqGhbv08U20hfHRdxxYV5b2Ful/xEnryj+mjyEBmv
wFO1Q8Tlwi+6Wwen+VN0tjiQwdY/N6+dI39U2Nn4yCtYyLbCALTWSlq3qr6RjhaI
P8XFXcPweyow3GsFrwgJVJ/vA/gaAhY17NOmdI5icFioTeJbrrAYw88Cbh9PzkGS
IsgmHn8Yt9a3x/rzo2LhhMbzsXDR87l+OlJhmGCUB5L0kRt8rJz30ysCeKgTpkoz
QOBZPdODeJ4Pdk4Z82A7NPUAFaaGGxUMkeIoAIXJ0F/VIpKb7+l3AETlZA==
=x3x6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"RISC-V:
- Fix missing PAGE_PFN_MASK
- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
- Fix for nested virtualization when TSC scaling is active
- Estimate the size of fastcc subroutines conservatively, avoiding
disastrous underestimation when return thunks are enabled
- Avoid possible use of uninitialized fields of 'struct
kvm_lapic_irq'
Generic:
- Mark as such the boolean values available from the statistics file
descriptors
- Clarify statistics documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulate: do not adjust size of fastop and setcc subroutines
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
Documentation: kvm: clarify histogram units
kvm: stats: tell userspace which values are boolean
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
riscv: Fix missing PAGE_PFN_MASK
HEVC uAPI is used by 2 mainline drivers (Hantro, Cedrus)
and at least 2 out-of-tree drivers (rkvdec, RPi).
The uAPI has been reviewed so it is time to make it 'public' by
un-staging it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move HEVC pixel format since we are ready to stabilize the uAPI
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new flag that indicates that this control is a dynamically sized
array. Also document this flag.
Currently dynamically sized arrays are limited to one dimensional arrays,
but that might change in the future if there is a need for it.
The initial use-case of dynamic arrays are stateless codecs. A frame
can be divided in many slices, so you want to provide an array containing
slice information for each slice. Typically the number of slices is small,
but the standard allow for hundreds or thousands of slices. Dynamic arrays
are a good solution since sizing the array for the worst case would waste
substantial amounts of memory.
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The helper functions that test validity of colorspace-related fields
use the last value of the corresponding enums. This isn't very
future-proof, as there's a high chance someone adding a new value may
forget to update the helpers. Add new "LAST" entries to the enumerations
to improve this, and keep them private to the kernel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new YUVA and YUVX are permutations of the existing AYUV and XYUV
formats. They are use by the NXP i.MX8 ISI hardware.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
We have the per-interface type capabilities, currently for
extended capabilities, add the EML/MLD capabilities there
to have this advertised by the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an API for adding/modifying/removing a link of a station.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
amd-drm-next-5.20-2022-07-14:
amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup
amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure
radeon:
- Fix bogus power of two warning
UAPI:
- Unified memory for CWSR save/restore area for KFD
Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t parameter to
ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering
(after atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TFnI
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d950 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Use task_work_add if it is available, since task_work_add can bring
up better performance, especially batching signaling ->ubq_daemon can
be done.
It is observed that task_work_add() can boost iops by +4% on random
4k io test. Also except for completing io command, all other code
paths are same with completing io command via
io_uring_cmd_complete_in_task.
Meantime add one flag of UBLK_F_URING_CMD_COMP_IN_TASK for comparing
the mode easily.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the driver part of userspace block driver(ublk driver), the other
part is userspace daemon part(ublksrv)[1].
The two parts communicate by io_uring's IORING_OP_URING_CMD with one
shared cmd buffer for storing io command, and the buffer is read only for
ublksrv, each io command is indexed by io request tag directly, and is
written by ublk driver.
For example, when one READ io request is submitted to ublk block driver,
ublk driver stores the io command into cmd buffer first, then completes
one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued
to ublk driver beforehand by ublksrv for getting notification of any new
io request, and each URING_CMD is associated with one io request by tag.
After ublksrv gets the io command, it translates and handles the ublk io
request, such as, for the ublk-loop target, ublksrv translates the request
into same request on another file or disk, like the kernel loop block
driver. In ublksrv's implementation, the io is still handled by io_uring,
and share same ring with IORING_OP_URING_CMD command. When the target io
request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
both committing io request result and getting future notification of new
io request.
Another thing done by ublk driver is to copy data between kernel io
request and ublksrv's io buffer:
1) before ubsrv handles WRITE request, copy the request's data into
ublksrv's userspace io buffer, so that ublksrv can handle the write
request
2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
into this READ request, then ublk driver can complete the READ request
Zero copy may be switched if mm is ready to support it.
ublk driver doesn't handle any logic of the specific user space driver,
so it is small/simple enough.
[1] ublksrv
https://github.com/ming1/ubdsrv
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of the statistics values exported by KVM are always only 0 or 1.
It can be useful to export this fact to userspace so that it can track
them specially (for example by polling the value every now and then to
compute a % of time spent in a specific state).
Therefore, add "boolean value" as a new "unit". While it is not exactly
a unit, it walks and quacks like one. In particular, using the type
would be wrong because boolean values could be instantaneous or peak
values (e.g. "is the rmap allocated?") or even two-bucket histograms
(e.g. "number of posted vs. non-posted interrupt injections").
Suggested-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ath10k
* ethernet frame format support
rtw89
* TDLS support
cfg80211/mac80211
* airtime fairness fixes
* EHT support continued, especially in AP mode
* initial (and still major) rework for multi-link
operation (MLO) from 802.11be/wifi 7
As usual, also many small updates/cleanups/fixes/etc.
-----BEGIN PGP SIGNATURE-----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=smwk
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly large set of updates for next, highlights:
ath10k
* ethernet frame format support
rtw89
* TDLS support
cfg80211/mac80211
* airtime fairness fixes
* EHT support continued, especially in AP mode
* initial (and still major) rework for multi-link
operation (MLO) from 802.11be/wifi 7
As usual, also many small updates/cleanups/fixes/etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmLLR2MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG+hMH/jKGMOAbicR/CRq8
WLKmpb1eTJP2dbeiEs5amBk9DZQhqjx6tIQRCpZoGxBL+XWq7DX2fRLkAT56yS5/
NwferpR6IR9GlhjbfczF0JuQkP6eRUXnLrIKS5MViLI5QrCI80kkj4/mdqUXSiBV
cMfXl5T1j+pb3zHUVXjnmvY+77q6rZTPoGxa/l8d6MaIhAg+jhu2E1HaSaSCX/YK
TViq7ciI9cXoFV9yqhLkkBdGjBV8VQsKmeWEcA738bdSy1WAJSV1SVTJqLFvwdPI
PM1asxkPoQ7jRrwsY4G8pZ3zPskJMS4Qwdn64HK+no2AKhJt2p6MePD1XblcrGHK
QNStMY0=
=LfuD
-----END PGP SIGNATURE-----
Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <airlied@redhat.com>
To expose unified memory for ctx save/resotre area feature
availablity to libhsakmt.
Proposed userspace:
https://patchwork.freedesktop.org/series/106218/
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As discussed with Maxim add a counter for true NoPad violations.
This should help deployments catch unexpected padded records vs
just control records which always need re-encryption.
https: //lore.kernel.org/all/b111828e6ac34baad9f4e783127eba8344ac252d.camel@nvidia.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
-----BEGIN PGP SIGNATURE-----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=YD+W
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-pci-5.20' into kernelorgnext
KVM: s390/pci: enable zPCI for interpretive execution
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
commit dd374f84ba ("wifi: nl80211: expose link ID for associated
BSSes") used a top-level attribute to send link ID of the associated
BSS in the nested attribute NL80211_ATTR_BSS. But since NL80211_ATTR_BSS
is a nested attribute of the attributes defined in enum nl80211_bss,
define a new attribute in enum nl80211_bss and use it for sending the
link ID of the BSS.
Fixes: dd374f84ba ("wifi: nl80211: expose link ID for associated BSSes")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20220708122607.1836958-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The KVM_S390_ZPCI_OP ioctl provides a mechanism for managing
hardware-assisted virtualization features for s390x zPCI passthrough.
Add the first 2 operations, which can be used to enable/disable
the specified device for Adapter Event Notification interpretation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-21-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When doing load/store interpretation, the maximum store block length is
determined by the underlying firmware, not the host kernel API. Reflect
that in the associated Query PCI Function Group clp capability and let
userspace decide which is appropriate to present to the guest.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-20-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The function handle is a system-wide unique identifier for a zPCI
device. With zPCI instruction interpretation, the host will no
longer be executing the zPCI instructions on behalf of the guest.
As a result, the guest needs to use the real function handle in
order for firmware to associate the instruction with the proper
PCI function. Let's provide that handle to the guest.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-19-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-07-09
We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).
The main changes are:
1) Add new way for performing BTF type queries to BPF, from Daniel Müller.
2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.
3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.
4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.
5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.
6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.
7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.
8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.
9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.
10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.
11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.
12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.
13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.
14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.
15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.
16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================
Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today, the resolution of size axes is not documented. As a result, it's
not clear what the canonical interpretation of this value should be. On
Android, there is a need to calculate the size of the touch ellipse in
physical units (millimeters).
After reviewing linux source, it turned out that most of the existing
usages are already interpreting this value as "units/mm". This
documentation will make it explicit. This will help device
implementations with correctly following the linux specs, and will
ensure that the devices will work on Android without needing further
customized parameters for scaling of major/minor values.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220520084514.3451193-1-svv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Daniel Borkmann says:
====================
bpf 2022-07-08
We've added 3 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 40 insertions(+), 24 deletions(-).
The main changes are:
1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet.
2) Fix spurious packet loss in generic XDP when pushing packets out (note
that native XDP is not affected by the issue), from Johan Almbladh.
3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before
its set in stone as UAPI, from Joanne Koong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
bpf: Make sure mac_header was set before using it
xdp: Fix spurious packet loss in generic XDP TX path
====================
Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLIJGcQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpgS1D/9E2MxaWaHR+A35AXignJLaXxiLWlzTAwxr
/ioT6omgogbiaoTrxVZMbW+6vAPbUamXA9yqv2fC/4RERBfz3Z6UBLa8Hp6SFCMQ
vb/LSwRwnUuMr/HyF3hLjwISOi4oYs/uo3E7IpOPbpC/e0nDpJnGWx1UfQn0tJSH
WVwZsLbUe8T9fhHA0uSHbMoMSvLQGqfwwY+MET2+j+ZDwMoet194yka22jJwfDbF
l3cnUe2TQh6orRdzuagWX9WmdnWWyQM3DTqW2cSA0hepyxGMWkCMhMuyV5yqUXhD
noHshcyL76h8WQi/BwYDAGYqGy1+FkOkuV3DmVnjHVQory17Ze8ijtImMoEWpkgl
TwTTd2+o0ivcEd0JHLeqLHkTXKUENeUMTpJVuLotLMMdupIvF0jrdNWTWCM7uBto
Q9JxIkEs+16bRqT+yzC4cNuzSQRL6+qQ5jVO5BsNmJoNvs15KN7vgAQ+uR4NCCIv
GqHbTiBVsi7DYipS6jNi/bWnxDtIsNsn48WCdx52OYpd1NbkY3oEHMqBZ6rnsPJH
/uek3VLajRZfG61EMUGlazitQdW3/z31wM0iP8Y8xPyvSNCbsJkFtrNO13jpuy9p
0YRP3peXYb2eEzYpq355RSCCpyActDYp77hjcyYQP3gJcnoViZ6rBUHr5Rw5W6lN
siwWz7aNXg==
=w3SQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
Extend LoadPin to allow loading of kernel files from trusted dm-verity [1]
devices.
This change adds the concept of trusted verity devices to LoadPin. LoadPin
maintains a list of root digests of verity devices it considers trusted.
Userspace can populate this list through an ioctl on the new LoadPin
securityfs entry 'dm-verity'. The ioctl receives a file descriptor of
a file with verity digests as parameter. Verity reads the digests from
this file after confirming that the file is located on the pinned root.
The digest file must contain one digest per line. The list of trusted
digests can only be set up once, which is typically done at boot time.
When a kernel file is read LoadPin first checks (as usual) whether the file
is located on the pinned root, if so the file can be loaded. Otherwise, if
the verity extension is enabled, LoadPin determines whether the file is
located on a verity backed device and whether the root digest of that
device is in the list of trusted digests. The file can be loaded if the
verity device has a trusted root digest.
Background:
As of now LoadPin restricts loading of kernel files to a single pinned
filesystem, typically the rootfs. This works for many systems, however it
can result in a bloated rootfs (and OTA updates) on platforms where
multiple boards with different hardware configurations use the same rootfs
image. Especially when 'optional' files are large it may be preferable to
download/install them only when they are actually needed by a given board.
Chrome OS uses Downloadable Content (DLC) [2] to deploy certain 'packages'
at runtime. As an example a DLC package could contain firmware for a
peripheral that is not present on all boards. DLCs use dm-verity to verify
the integrity of the DLC content.
[1] https://www.kernel.org/doc/html/latest/admin-guide/device-mapper/verity.html
[2] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/dlcservice/docs/developer.md
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/lkml/20220627083512.v7.2.I01c67af41d2f6525c6d023101671d7339a9bc8b5@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
added the bpf_dynptr_write() and bpf_dynptr_read() APIs.
However, it will be needed for some dynptr types to pass in flags as
well (e.g. when writing to a skb, the user may like to invalidate the
hash or recompute the checksum).
This patch adds a "u64 flags" arg to the bpf_dynptr_read() and
bpf_dynptr_write() APIs before their UAPI signature freezes where
we then cannot change them anymore with a 5.19.x released kernel.
Fixes: 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220706232547.4016651-1-joannelkoong@gmail.com
32 bit sqe->cmd_op is an union with 64 bit values. It's always a good
idea to do padding explicitly. Also zero check it in prep, so it can be
used in the future if needed without compatibility concerns.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e6b95a05e970af79000435166185e85b196b2ba2.1657202417.git.asml.silence@gmail.com
[axboe: turn bitwise OR into logical variant]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is to add new option for always keeping gpu mapping.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to provide type match support we require a new type of
relocation which, in turn, requires toolchain support. Recent LLVM/Clang
versions support a new value for the last argument to the
__builtin_preserve_type_info builtin, for example.
With this change we introduce the necessary constants into relevant
header files, mirroring what the compiler may support.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-2-deso@posteo.net
I have noticed a few minor wording issues in a comment recently added
above XFRM_OFFLOAD flags in 7c76ecd9c9 ("xfrm: enforce validity of
offload input flags").
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLBZ3sTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXe2oB/wJ1T3/1tZ0+Jx7Hk84MXUTO9W05KqH
sie+yehu9A5+RNlA6/zRJBEmA4pyvOjtN0qynh3f25LfIesxUC5Tma1Epzp/Gnay
cYBrypD2iKKMNpJoiBtVVXh6Kin7+5oSLr4zxeaYcXjGfUlPIOqMnrwbGu/5ZtMH
7FL092tkQ/S1j/LDTiZk+OdjpuaM9D/7Z0t0iJ6NJb70/VEk6K3bY5XdmjLayYIJ
IBmxBbUXvBevVRDiSyMqNzA+RzQ5egrTrE3gPZZPneISN3Qu6cG+5xUqYGOxyjrJ
hzinoC48wEEHEMAeiM28AXjv9voIPvSoqeOvgZmSS0JTkfPZqirYpdzd
=9458
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220703' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-03
this is a pull request of 15 patches for net-next/master.
The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.
The next patch is by me an fixes a typo in the ctucanfd driver.
The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Edge
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Link: https://lore.kernel.org/r/20220629144210.2983229-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.
This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Indicate SMI profiling events available.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define new system management interface event IDs for migration, GPU
recoverable page fault, user queues eviction, restore and unmap from
GPU events and corresponding event triggers, those will be implemented
in the following patches.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We waste a u64 SQE field for flags even though we don't need as many
bits and it can be used for something more useful later. Store io_uring
specific send/recv flags in sqe->ioprio instead of ->addr2.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 0455d4ccec ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
[axboe: change comment in io_uring.h as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit ed6cd6a178 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have two options:
1. Treat all BPF_LSM_CGROUP the same, regardless of attach_btf_id
2. Treat BPF_LSM_CGROUP+attach_btf_id as a separate hook point
I was doing (2) in the original patch, but switching to (1) here:
* bpf_prog_query returns all attached BPF_LSM_CGROUP programs
regardless of attach_btf_id
* attach_btf_id is exported via bpf_prog_info
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-6-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching
to other per-cgroup hooks. New BPF_LSM_CGROUP is added
to trigger new mode; the actual lsm hook we attach to is
signaled via existing attach_btf_id.
For the hooks that have 'struct socket' or 'struct sock' as its first
argument, we use the cgroup associated with that socket. For the rest,
we use 'current' cgroup (this is all on default hierarchy == v2 only).
Note that for some hooks that work on 'struct sock' we still
take the cgroup from 'current' because some of them work on the socket
that hasn't been properly initialized yet.
Behind the scenes, we allocate a shim program that is attached
to the trampoline and runs cgroup effective BPF programs array.
This shim has some rudimentary ref counting and can be shared
between several programs attaching to the same lsm hook from
different cgroups.
Note that this patch bloats cgroup size because we add 211
cgroup_bpf_attach_type(s) for simplicity sake. This will be
addressed in the subsequent patch.
Also note that we only add non-sleepable flavor for now. To enable
sleepable use-cases, bpf_prog_run_array_cg has to grab trace rcu,
shim programs have to be freed via trace rcu, cgroup_bpf.effective
should be also trace-rcu-managed + maybe some other changes that
I'm not aware of.
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-4-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Including <linux/mptcp.h> before the C library <netinet/in.h> header
causes symbol redefinition errors at compile-time due to duplicate
declarations and definitions in the <linux/in.h> header included by
<linux/mptcp.h>.
Explicitly include <netinet/in.h> before <linux/in.h> in
<linux/mptcp.h> when __KERNEL__ is not defined so that the C library
compatibility logic in <linux/libc-compat.h> is enabled when including
<linux/mptcp.h> in user space code.
Fixes: c11c5906bc ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%25lkp@intel.com/
Acked-by: Dan Williams <dan.j.williams@intel.com> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Sometimes we want to know an accurate number of samples even if it's
lost. Currenlty PERF_RECORD_LOST is generated for a ring-buffer which
might be shared with other events. So it's hard to know per-event
lost count.
Add event->lost_samples field and PERF_FORMAT_LOST to retrieve it from
userspace.
Original-patch-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220616180623.1358843-1-namhyung@kernel.org
When the target process is busy, incoming oneway transactions are
queued in the async_todo list. If the clients continue sending extra
oneway transactions while the target process is frozen, this queue can
become too large to accommodate new transactions. That's why binder
driver introduced ONEWAY_SPAM_DETECTION to detect this situation. It's
helpful to debug the async binder buffer exhausting issue, but the
issue itself isn't solved directly.
In real cases applications are designed to send oneway transactions
repeatedly, delivering updated inforamtion to the target process.
Typical examples are Wi-Fi signal strength and some real time sensor
data. Even if the apps might only care about the lastet information,
all outdated oneway transactions are still accumulated there until the
frozen process is thawed later. For this kind of situations, there's
no existing method to skip those outdated transactions and deliver the
latest one only.
This patch introduces a new transaction flag TF_UPDATE_TXN. To use it,
use apps can set this new flag along with TF_ONE_WAY. When such an
oneway transaction is to be queued into the async_todo list of a frozen
process, binder driver will check if any previous pending transactions
can be superseded by comparing their code, flags and target node. If
such an outdated pending transaction is found, the latest transaction
will supersede that outdated one. This effectively prevents the async
binder buffer running out and saves unnecessary binder read workloads.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Li Li <dualli@google.com>
Link: https://lore.kernel.org/r/20220526220018.3334775-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The actual driver will be added via the CAN tree.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/r/20220618180134.9890-1-max@enpas.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for RS-485 multipoint addressing using 9th bit [*]. The
addressing mode is configured through ->rs485_config().
ADDRB in termios indicates 9th bit addressing mode is enabled. In this
mode, 9th bit is used to indicate an address (byte) within the
communication line. ADDRB can only be enabled/disabled through
->rs485_config() that is also responsible for setting the destination and
receiver (filter) addresses.
Add traps to detect unwanted changes to struct serial_rs485 layout using
static_assert().
[*] Technically, RS485 is just an electronic spec and does not itself
specify the 9th bit addressing mode but 9th bit seems at least
"semi-standard" way to do addressing with RS485.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of listing the bits for UART_LSR_BRK_ERROR_BITS and
UART_MSR_ANY_DELTA in comment, use them to define instead.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The switch that is present on the Renesas RZ/N1 SoC uses a specific
VLAN value followed by 6 bytes which contains forwarding configuration.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.
This option could only be configured via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases, the NX hugepage mitigation for iTLB multihit is not
needed for all guests on a host. Allow disabling the mitigation on a
per-VM basis to avoid the performance hit of NX hugepages on trusted
workloads.
In order to disable NX hugepages on a VM, ensure that the userspace
actor has permission to reboot the system. Since disabling NX hugepages
would allow a guest to crash the system, it is similar to reboot
permissions.
Ideally, KVM would require userspace to prove it has access to KVM's
nx_huge_pages module param, e.g. so that userspace can opt out without
needing full reboot permissions. But getting access to the module param
file info is difficult because it is buried in layers of sysfs and module
glue. Requiring CAP_SYS_BOOT is sufficient for all known use cases.
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-9-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For authentication, we need the BSS, the link_id and the AP
MLD address to create the link and station, (for now) the
driver assigns a link address and sends the frame, the MLD
address needs to be the address of the interface.
For association, pass the list of BSSes that were selected
for the MLO connection, along with extra per-STA profile
elements, the AP MLD address and the link ID on which the
association request should be sent.
Note that for now we don't have a proper way to pass the link
address(es) and so the driver/mac80211 will select one, but
depending on how that selection works it means that assoc w/o
auth data still being around (mac80211 implementation detail)
the association won't necessarily work - so this will need to
be extended in the future to sort out the link addressing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.
So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.
For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.
Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
P010 is a YUV format with 10-bits per component with interleaved UV.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new helpers bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6} allow an XDP
program to generate SYN cookies in response to TCP SYN packets and to
check those cookies upon receiving the first ACK packet (the final
packet of the TCP handshake).
Unlike bpf_tcp_{gen,check}_syncookie these new helpers don't need a
listening socket on the local machine, which allows to use them together
with synproxy to accelerate SYN cookie generation.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-4-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_tcp_gen_syncookie expects the full length of the TCP header (with
all options), and bpf_tcp_check_syncookie accepts lengths bigger than
sizeof(struct tcphdr). Fix the documentation that says these lengths
should be exactly sizeof(struct tcphdr).
While at it, fix a typo in the name of struct ipv6hdr.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-2-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A cast inside __builtin_constant_p doesn't do anything since it should
evaluate as constant at compile time irrespective of this cast. Instead,
I moved this cast outside the ternary to ensure the return type is as
expected.
Additionally, if __HAVE_BUILTIN_BSWAP16__ was not defined then __swab16 is
actually returning an `int` not a `u16` due to integer promotion.
As Al Viro notes:
You *can't* get smaller-than-int out of ? :, same as you can't get it
out of addition, etc.
This also fixes some clang -Wformat warnings involving default
argument promotion.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://lkml.kernel.org/r/20220608223539.470472-1-justinstitt@google.com
Signed-off-by: Justin Stitt <jstitt007@gmail.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a new KFD ioctl to return the largest possible memory size that
can be allocated as a buffer object using
kfd_ioctl_alloc_memory_of_gpu. It attempts to use exactly the same
accept/reject criteria as that function so that allocating a new
buffer object of the size returned by this new ioctl is guaranteed to
succeed, barring races with other allocating tasks.
This IOCTL will be used by libhsakmt:
https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.html
Signed-off-by: Daniel Phillips <Daniel.Phillips@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts a7c41b4687
Even though IORING_CLOSE_FD_AND_FILE_SLOT might save cycles for some
users, but it tries to do two things at a time and it's not clear how to
handle errors and what to return in a single result field when one part
fails and another completes well. Kill it for now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/837c745019b3795941eee4fcfd7de697886d645b.1655224415.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here's a first set of patches for v5.20. This is just a
queue flush, before we get things back from net-next that
are causing conflicts, and then can start merging a lot
of MLO (multi-link operation, part of 802.11be) code.
Lots of cleanups all over.
The only notable change is perhaps wilc1000 being the
first driver to disable WEP (while enabling WPA3).
-----BEGIN PGP SIGNATURE-----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=E0Dx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next patches for v5.20
Here's a first set of patches for v5.20. This is just a
queue flush, before we get things back from net-next that
are causing conflicts, and then can start merging a lot
of MLO (multi-link operation, part of 802.11be) code.
Lots of cleanups all over.
The only notable change is perhaps wilc1000 being the
first driver to disable WEP (while enabling WPA3).
* tag 'wireless-next-2022-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (29 commits)
wifi: mac80211_hwsim: Directly use ida_alloc()/free()
wifi: mac80211: refactor some key code
wifi: mac80211: remove cipher scheme support
wifi: nl80211: fix typo in comment
wifi: virt_wifi: fix typo in comment
rtw89: add new state to CFO state machine for UL-OFDMA
rtw89: 8852c: add trigger frame counter
ieee80211: add trigger frame definition
wifi: wfx: Remove redundant NULL check before release_firmware() call
wifi: rtw89: support MULTI_BSSID and correct BSSID mask of H2C
wifi: ray_cs: Drop useless status variable in parse_addr()
wifi: ray_cs: Utilize strnlen() in parse_addr()
wifi: rtw88: use %*ph to print small buffer
wifi: wilc1000: add IGTK support
wifi: wilc1000: add WPA3 SAE support
wifi: wilc1000: remove WEP security support
wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
wifi: rtw88: Fix Sparse warning for rtw8821c_hw_spec
wifi: rtw88: Fix Sparse warning for rtw8723d_hw_spec
...
====================
Link: https://lore.kernel.org/r/20220610142838.330862-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e2be04c7f9 ("License cleanup: add SPDX license identifier to
uapi header files with a license") added the correct SPDX identifier to
include/uapi/linux/netfilter/xt_IDLETIMER.h.
A subsequent commit removed it for no reason and reintroduced the UAPI
license incorrectness as the file is now missing the UAPI exception
again.
Add it back and remove the GPLv2 boilerplate while at it.
Fixes: 68983a354a ("netfilter: xtables: Add snapshot of hardidletimer target")
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Iproute2 build generates a warning when built with gcc-12.
This is because the alg_key in xfrm.h API has zero size
array element instead of flexible array.
CC xfrm_state.o
In function ‘xfrm_algo_parse’,
inlined from ‘xfrm_state_modify.constprop’ at xfrm_state.c:573:5:
xfrm_state.c:162:32: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
162 | buf[j] = val;
| ~~~~~~~^~~~~
This patch convert the alg_key into flexible array member.
There are other zero size arrays here that should be converted as
well.
This patch is RFC only since it is only compile tested and
passes trivial iproute2 tests.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
HCTR2 is a tweakable, length-preserving encryption mode that is intended
for use on CPUs with dedicated crypto instructions. HCTR2 has the
property that a bitflip in the plaintext changes the entire ciphertext.
This property fixes a known weakness with filename encryption: when two
filenames in the same directory share a prefix of >= 16 bytes, with
AES-CTS-CBC their encrypted filenames share a common substring, leaking
information. HCTR2 does not have this problem.
More information on HCTR2 can be found here: "Length-preserving
encryption with HCTR2": https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:
* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX
RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.
Fixes: c1318b39c7 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is analogous to the previous sync file export patch in that
it allows you to import a sync_file into a dma-buf. Unlike the previous
patch, however, this does add genuinely new functionality to dma-buf.
Without this, the only way to attach a sync_file to a dma-buf is to
submit a batch to your driver of choice which waits on the sync_file and
claims to write to the dma-buf. Even if said batch is a no-op, a submit
is typically way more overhead than just attaching a fence. A submit
may also imply extra synchronization with other work because it happens
on a hardware queue.
In the Vulkan world, this is useful for dealing with the out-fence from
vkQueuePresent. Current Linux window-systems (X11, Wayland, etc.) all
rely on dma-buf implicit sync. Since Vulkan is an explicit sync API, we
get a set of fences (VkSemaphores) in vkQueuePresent and have to stash
those as an exclusive (write) fence on the dma-buf. We handle it in
Mesa today with the above mentioned dummy submit trick. This ioctl
would allow us to set it directly without the dummy submit.
This may also open up possibilities for GPU drivers to move away from
implicit sync for their kernel driver uAPI and instead provide sync
files and rely on dma-buf import/export for communicating with other
implicit sync clients.
We make the explicit choice here to only allow setting RW fences which
translates to an exclusive fence on the dma_resv. There's no use for
read-only fences for communicating with other implicit sync userspace
and any such attempts are likely to be racy at best. When we got to
insert the RW fence, the actual fence we set as the new exclusive fence
is a combination of the sync_file provided by the user and all the other
fences on the dma_resv. This ensures that the newly added exclusive
fence will never signal before the old one would have and ensures that
we don't break any dma_resv contracts. We require userspace to specify
RW in the flags for symmetry with the export ioctl and in case we ever
want to support read fences in the future.
There is one downside here that's worth documenting: If two clients
writing to the same dma-buf using this API race with each other, their
actions on the dma-buf may happen in parallel or in an undefined order.
Both with and without this API, the pattern is the same: Collect all
the fences on dma-buf, submit work which depends on said fences, and
then set a new exclusive (write) fence on the dma-buf which depends on
said work. The difference is that, when it's all handled by the GPU
driver's submit ioctl, the three operations happen atomically under the
dma_resv lock. If two userspace submits race, one will happen before
the other. You aren't guaranteed which but you are guaranteed that
they're strictly ordered. If userspace manages the fences itself, then
these three operations happen separately and the two render operations
may happen genuinely in parallel or get interleaved. However, this is a
case of userspace racing with itself. As long as we ensure userspace
can't back the kernel into a corner, it should be fine.
v2 (Jason Ekstrand):
- Use a wrapper dma_fence_array of all fences including the new one
when importing an exclusive fence.
v3 (Jason Ekstrand):
- Lock around setting shared fences as well as exclusive
- Mark SIGNAL_SYNC_FILE as a read-write ioctl.
- Initialize ret to 0 in dma_buf_wait_sync_file
v4 (Jason Ekstrand):
- Use the new dma_resv_get_singleton helper
v5 (Jason Ekstrand):
- Rename the IOCTLs to import/export rather than wait/signal
- Drop the WRITE flag and always get/set the exclusive fence
v6 (Jason Ekstrand):
- Split import and export into separate patches
- New commit message
v7 (Daniel Vetter):
- Fix the uapi header to use the right struct in the ioctl
- Use a separate dma_buf_import_sync_file struct
- Add kerneldoc for dma_buf_import_sync_file
v8 (Jason Ekstrand):
- Rebase on Christian König's fence rework
v9 (Daniel Vetter):
- Fix -EINVAL checks for the flags parameter
- Add documentation about read/write fences
- Add documentation about the expected usage of import/export and
specifically call out the possible userspace race.
v10 (Simon Ser):
- Fix a typo in the docs
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-3-jason@jlekstrand.net
Modern userspace APIs like Vulkan are built on an explicit
synchronization model. This doesn't always play nicely with the
implicit synchronization used in the kernel and assumed by X11 and
Wayland. The client -> compositor half of the synchronization isn't too
bad, at least on intel, because we can control whether or not i915
synchronizes on the buffer and whether or not it's considered written.
The harder part is the compositor -> client synchronization when we get
the buffer back from the compositor. We're required to be able to
provide the client with a VkSemaphore and VkFence representing the point
in time where the window system (compositor and/or display) finished
using the buffer. With current APIs, it's very hard to do this in such
a way that we don't get confused by the Vulkan driver's access of the
buffer. In particular, once we tell the kernel that we're rendering to
the buffer again, any CPU waits on the buffer or GPU dependencies will
wait on some of the client rendering and not just the compositor.
This new IOCTL solves this problem by allowing us to get a snapshot of
the implicit synchronization state of a given dma-buf in the form of a
sync file. It's effectively the same as a poll() or I915_GEM_WAIT only,
instead of CPU waiting directly, it encapsulates the wait operation, at
the current moment in time, in a sync_file so we can check/wait on it
later. As long as the Vulkan driver does the sync_file export from the
dma-buf before we re-introduce it for rendering, it will only contain
fences from the compositor or display. This allows to accurately turn
it into a VkFence or VkSemaphore without any over-synchronization.
By making this an ioctl on the dma-buf itself, it allows this new
functionality to be used in an entirely driver-agnostic way without
having access to a DRM fd. This makes it ideal for use in driver-generic
code in Mesa or in a client such as a compositor where the DRM fd may be
hard to reach.
v2 (Jason Ekstrand):
- Use a wrapper dma_fence_array of all fences including the new one
when importing an exclusive fence.
v3 (Jason Ekstrand):
- Lock around setting shared fences as well as exclusive
- Mark SIGNAL_SYNC_FILE as a read-write ioctl.
- Initialize ret to 0 in dma_buf_wait_sync_file
v4 (Jason Ekstrand):
- Use the new dma_resv_get_singleton helper
v5 (Jason Ekstrand):
- Rename the IOCTLs to import/export rather than wait/signal
- Drop the WRITE flag and always get/set the exclusive fence
v6 (Jason Ekstrand):
- Drop the sync_file import as it was all-around sketchy and not nearly
as useful as import.
- Re-introduce READ/WRITE flag support for export
- Rework the commit message
v7 (Jason Ekstrand):
- Require at least one sync flag
- Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference
- Use _rcu helpers since we're accessing the dma_resv read-only
v8 (Jason Ekstrand):
- Return -ENOMEM if the sync_file_create fails
- Predicate support on IS_ENABLED(CONFIG_SYNC_FILE)
v9 (Jason Ekstrand):
- Add documentation for the new ioctl
v10 (Jason Ekstrand):
- Go back to dma_buf_sync_file as the ioctl struct name
v11 (Daniel Vetter):
- Go back to dma_buf_export_sync_file as the ioctl struct name
- Better kerneldoc describing what the read/write flags do
v12 (Christian König):
- Document why we chose to make it an ioctl on dma-buf
v13 (Jason Ekstrand):
- Rebase on Christian König's fence rework
v14 (Daniel Vetter & Christian König):
- Use dma_rev_usage_rw to get the properly inverted usage to pass to
dma_resv_get_singleton()
- Clean up the sync_file and fd if copy_to_user() fails
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Acked-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-2-jason@jlekstrand.net
There are cases that malicious virtual machines can cause CPU stuck (due
to event windows don't open up), e.g., infinite loop in microcode when
nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and
IRQ) can be delivered. It leads the CPU to be unavailable to host or
other VMs.
VMM can enable notify VM exit that a VM exit generated if no event
window occurs in VM non-root mode for a specified amount of time (notify
window).
Feature enabling:
- The new vmcs field SECONDARY_EXEC_NOTIFY_VM_EXITING is introduced to
enable this feature. VMM can set NOTIFY_WINDOW vmcs field to adjust
the expected notify window.
- Add a new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT so that user space
can query and enable this feature in per-VM scope. The argument is a
64bit value: bits 63:32 are used for notify window, and bits 31:0 are
for flags. Current supported flags:
- KVM_X86_NOTIFY_VMEXIT_ENABLED: enable the feature with the notify
window provided.
- KVM_X86_NOTIFY_VMEXIT_USER: exit to userspace once the exits happen.
- It's safe to even set notify window to zero since an internal hardware
threshold is added to vmcs.notify_window.
VM exit handling:
- Introduce a vcpu state notify_window_exits to records the count of
notify VM exits and expose it through the debugfs.
- Notify VM exit can happen incident to delivery of a vector event.
Allow it in KVM.
- Exit to userspace unconditionally for handling when VM_CONTEXT_INVALID
bit is set.
Nested handling
- Nested notify VM exits are not supported yet. Keep the same notify
window control in vmcs02 as vmcs01, so that L1 can't escape the
restriction of notify VM exits through launching L2 VM.
Notify VM exit is defined in latest Intel Architecture Instruction Set
Extensions Programming Reference, chapter 9.2.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Co-developed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-5-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the triple fault sythesized by KVM, e.g. the RSM path or
nested_vmx_abort(), if KVM exits to userspace before the request is
serviced, userspace could migrate the VM and lose the triple fault.
Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault with a
new event KVM_VCPUEVENT_VALID_FAULT_FAULT so that userspace can save and
restore the triple fault event. This extension is guarded by a new KVM
capability KVM_CAP_TRIPLE_FAULT_EVENT.
Note that in the set_vcpu_events path, userspace is able to set/clear
the triple fault request through triple_fault.pending field.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, BTF only supports upto 32bit enum value with BTF_KIND_ENUM.
But in kernel, some enum indeed has 64bit values, e.g.,
in uapi bpf.h, we have
enum {
BPF_F_INDEX_MASK = 0xffffffffULL,
BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK,
BPF_F_CTXLEN_MASK = (0xfffffULL << 32),
};
In this case, BTF_KIND_ENUM will encode the value of BPF_F_CTXLEN_MASK
as 0, which certainly is incorrect.
This patch added a new btf kind, BTF_KIND_ENUM64, which permits
64bit value to cover the above use case. The BTF_KIND_ENUM64 has
the following three fields followed by the common type:
struct bpf_enum64 {
__u32 nume_off;
__u32 val_lo32;
__u32 val_hi32;
};
Currently, btf type section has an alignment of 4 as all element types
are u32. Representing the value with __u64 will introduce a pad
for bpf_enum64 and may also introduce misalignment for the 64bit value.
Hence, two members of val_hi32 and val_lo32 are chosen to avoid these issues.
The kflag is also introduced for BTF_KIND_ENUM and BTF_KIND_ENUM64
to indicate whether the value is signed or unsigned. The kflag intends
to provide consistent output of BTF C fortmat with the original
source code. For example, the original BTF_KIND_ENUM bit value is 0xffffffff.
The format C has two choices, printing out 0xffffffff or -1 and current libbpf
prints out as unsigned value. But if the signedness is preserved in btf,
the value can be printed the same as the original source code.
The kflag value 0 means unsigned values, which is consistent to the default
by libbpf and should also cover most cases as well.
The new BTF_KIND_ENUM64 is intended to support the enum value represented as
64bit value. But it can represent all BTF_KIND_ENUM values as well.
The compiler ([1]) and pahole will generate BTF_KIND_ENUM64 only if the value has
to be represented with 64 bits.
In addition, a static inline function btf_kind_core_compat() is introduced which
will be used later when libbpf relo_core.c changed. Here the kernel shares the
same relo_core.c with libbpf.
[1] https://reviews.llvm.org/D124641
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062600.3716578-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
-----BEGIN PGP SIGNATURE-----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=/6Ue
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: pvdump and selftest improvements
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
because,unusually, it has dependencies on both the mm-stable and
mm-nonmm-stable queues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpz3SAAKCRDdBJ7gKXxA
jou6AP9bY89NifR7Tc8U59Xu4c9amphXS9rTJv7Ysj3GxBMoRwEAuXvvJTet6mEn
UdmytDdb4BtAlx7Itd7IKu4S9JD6mQw=
=bAU1
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
This contains the new HTE subsystem that has been in the works for a
couple of months now. The infrastructure provided allows for drivers to
register as hardware timestamp providers, while consumers will be able
to request events that they are interested in (such as GPIOs and IRQs)
to be timestamped by the hardware providers.
Note that this currently supports only one provider, but there seems to
be enough interest in this functionality and we expect to see more
drivers added once this is merged.
-----BEGIN PGP SIGNATURE-----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=sOJn
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
This is the majority of the loongarch architecture code, including
the final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so
it is currently impossible to boot the kernel, until the
loongarch specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the
PCI subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI
for the libc ports to build on, and to help any treewide changes
in the mainline kernel get applied here as well. A gcc-12 based
tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/.
Original description from Huacai Chen at
https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-nexthttps://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203https://mantis.uefi.org/mantis/view.php?id=2313"
-----BEGIN PGP SIGNATURE-----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=hkwN
-----END PGP SIGNATURE-----
Merge tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-nexthttps://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
-----BEGIN PGP SIGNATURE-----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=OkKj
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-06-02' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
- A small series with some prep patches for the upcoming 5.20 split of
the io_uring.c file. No functional changes here, just minor bits that
are nice to get out of the way now (me)
- Fix for a memory leak in high numbered provided buffer groups,
introduced in the merge window (me)
- Wire up the new socket opcode for allocated direct descriptors,
making it consistent with the other opcodes that can instantiate a
descriptor (me)
- Fix for the inflight tracking, should go into 5.18-stable as well
(me)
- Fix for a deadlock for io-wq offloaded file slot allocations (Pavel)
- Direct descriptor failure fput leak fix (Xiaoguang)
- Fix for the direct descriptor allocation hinting in case of
unsuccessful install (Xiaoguang)
* tag 'io_uring-5.19-2022-06-02' of git://git.kernel.dk/linux-block:
io_uring: reinstate the inflight tracking
io_uring: fix deadlock on iowq file slot alloc
io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots
io_uring: defer alloc_hint update to io_file_bitmap_set()
io_uring: ensure fput() called correspondingly when direct install fails
io_uring: wire up allocated direct descriptors for socket
io_uring: fix a memory leak of buffer group list on exit
io_uring: move shutdown under the general net section
io_uring: unify calling convention for async prep handling
io_uring: add io_op_defs 'def' pointer in req init and issue
io_uring: make prep and issue side of req handlers named consistently
io_uring: make timeout prep handlers consistent with other prep handlers
mac vlan filter and stats support in mlx5 vdpa
irq hardening in virtio
performance improvements in virtio crypto
polling i/o support in virtio blk
ASID support in vhost
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKXBEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9pgIAJKdLbtrqDdDrPJRg5Xs2wsWMbGnXbKxm71Q
kGPfnkn15yjwiMJcdNO8O16qP5VGUzBWPhGc3X7U9KRU4EI2yEGLFv9hwRvdlY9h
4C7O4fBWTbuqTT6pwwAH9vT3/b6q8bMh4D3uD2P1zSwh8POqHm1kyRivXPPr4PUA
5TAc04EGcrFQpC9co3v8UmJ7EjLa/tgdUb7igTv5VHi7K2GNGMycSvHP/v7CFgZ6
paVYThMCrWOJkIIk8k6qhMKhAxkQ7lBrqhLBtfX9jyadLmq5hAQQu2D43PoZb2ed
IbNN/g5Sv9yaL7ERYzTRAEfuXVGPiDLWli2C5sHdz2IJDBeqQeU=
=Vlh6
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio and vdpa features, fixes, and cleanups:
- mac vlan filter and stats support in mlx5 vdpa
- irq hardening in virtio
- performance improvements in virtio crypto
- polling i/o support in virtio blk
- ASID support in vhost
- fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa: ifcvf: set pci driver data in probe
vdpa/mlx5: Add RX MAC VLAN filter support
vdpa/mlx5: Remove flow counter from steering
vhost: rename vhost_work_dev_flush
vhost-test: drop flush after vhost_dev_cleanup
vhost-scsi: drop flush after vhost_dev_cleanup
vhost_vsock: simplify vhost_vsock_flush()
vhost_test: remove vhost_test_flush_vq()
vhost_net: get rid of vhost_net_flush_vq() and extra flush calls
vhost: flush dev once during vhost_dev_stop
vhost: get rid of vhost_poll_flush() wrapper
vhost-vdpa: return -EFAULT on copy_to_user() failure
vdpasim: Off by one in vdpasim_set_group_asid()
virtio: Directly use ida_alloc()/free()
virtio: use WARN_ON() to warning illegal status value
virtio: harden vring IRQ
virtio: allow to unbreak virtqueue
virtio-ccw: implement synchronize_cbs()
virtio-mmio: implement synchronize_cbs()
virtio-pci: implement synchronize_cbs()
...
The header cleanup series from Masahiro Yamada ended up causing
some regressions in the ABI because of an ambigous uid_t type.
This was only caught after the original patches got merged, but
at least the fixes are trivial and hopefully complete.
-----BEGIN PGP SIGNATURE-----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=RvbP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"The header cleanup series from Masahiro Yamada ended up causing some
regressions in the ABI because of an ambigous uid_t type.
This was only caught after the original patches got merged, but at
least the fixes are trivial and hopefully complete"
* tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
binder: fix sender_euid type in uapi header
sparc: fix mis-use of __kernel_{uid,gid}_t in uapi/asm/stat.h
powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck
in lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bWkn
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
The {pid,uid}_t fields of struct binder_transaction were recently
replaced to use kernel types in commit 169adc2b6b ("android/binder.h:
add linux/android/binder(fs).h to UAPI compile-test coverage").
However, using __kernel_uid_t here breaks backwards compatibility in
architectures using 16-bits for this type, since glibc and some others
still expect a 32-bit uid_t. Instead, let's use __kernel_uid32_t which
avoids this compatibility problem.
Fixes: 169adc2b6b ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage")
Reported-by: Christopher Ferris <cferris@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use plain 255 instead, which also avoid introducing an additional header
dependency on <linux/types.h>
Fixes: 26859240e4 ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220531094345.13801-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delay accounting does not track the delay of write-protect copy. When
tasks trigger many write-protect copys(include COW and unsharing of
anonymous pages[1]), it may spend a amount of time waiting for them. To
get the delay of tasks in write-protect copy, could help users to evaluate
the impact of using KSM or fork() or GUP.
Also update tools/accounting/getdelays.c:
/ # ./getdelays -dl -p 231
print delayacct stats ON
listen forever
PID 231
CPU count real total virtual total delay total delay average
6247 1859000000 2154070021 1674255063 0.268ms
IO count delay total delay average
0 0 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
0 0 0ms
THRASHING count delay total delay average
0 0 0ms
COMPACT count delay total delay average
3 72758 0ms
WPCOPY count delay total delay average
3635 271567604 0ms
[1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages")
Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: wangyong <wang.yong12@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
The capability indicates dump support for protected VMs.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-9-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-9-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The previous patch introduced the per-VM dump functions now let's
focus on dumping the VCPU state via the newly introduced
KVM_S390_PV_CPU_COMMAND ioctl which mirrors the VM UV ioctl and can be
extended with new commands later.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-8-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-8-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Sometimes dumping inside of a VM fails, is unavailable or doesn't
yield the required data. For these occasions we dump the VM from the
outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the
guest through dumpers like KDUMP. A PV guest can be dumped from the
hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the
Ultravisor who safeguards the VM state. New UV calls have been added
to initialize the dump, dump storage state data, dump cpu data and
complete the dump process. We expose these calls in this patch via a
new UV ioctl command.
The sensitive parts of the dump data are encrypted, the dump key is
derived from the Customer Communication Key (CCK). This ensures that
only the owner of the VM who has the CCK can decrypt the dump data.
The memory is dumped / read via a normal export call and a re-import
after the dump initialization is not needed (no re-encryption with a
dump key).
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-7-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-7-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The dump API requires userspace to provide buffers into which we will
store data. The dump information added in this patch tells userspace
how big those buffers need to be.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-6-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-6-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Some of the query information is already available via sysfs but
having a IOCTL makes the information easier to retrieve.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-4-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-4-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Follows the vDPA support for associating ASID to a specific virtqueue
group. This patch adds a uAPI to support setting them from userspace.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-15-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the support for virtqueue group in vDPA. This patches
introduces uAPI to get the virtqueue group ID for a specific virtqueue
in vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-14-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the uAPI for getting the number of address
spaces supported by this vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-13-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the vDPA support for multiple address spaces, this patch
introduce uAPI for the userspace to know the number of virtqueue
groups supported by the vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-12-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches allows userspace to send ASID based IOTLB message to
vhost. This idea is to use the reserved u32 field in the existing V2
IOTLB message. Vhost device should advertise this capability via
VHOST_BACKEND_F_IOTLB_ASID backend feature.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-10-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should store feature bits in vhost_types.h as what has been done
for e.g VHOST_F_LOG_ALL.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-2-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allows to read vendor statistics of a vdpa device. The specific
statistics data are received from the upstream driver in the form of an
(attribute name, attribute value) pairs.
An example of statistics for mlx5_vdpa device are:
received_desc - number of descriptors received by the virtqueue
completed_desc - number of descriptors completed by the virtqueue
A descriptor using indirect buffers is still counted as 1. In addition,
N chained descriptors are counted correctly N times as one would expect.
A new callback was added to vdpa_config_ops which provides the means for
the vdpa driver to return statistics results.
The interface allows for reading all the supported virtqueues, including
the control virtqueue if it exists.
Below are some examples taken from mlx5_vdpa which are introduced in the
following patch:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
2. Read statistics for the virtqueue at index 32
$ vdpa dev vstats show vdpa-a qidx 32
vdpa-a:
queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{
"queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
"name":"completed_desc","value":417548}}}
4. Read statistics for the virtqueue at index 0 with preety json output
$ vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
"queue_type": "rx",
"queue_index": 0,
"name": "received_desc",
"value": 417776,
"name": "completed_desc",
"value": 417548
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: f9a2fb7331 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131")
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
One big issue with the file registration feature is that it needs user
space apps to maintain free slot info about io_uring's fixed file table,
which really is a burden for development. io_uring now supports choosing
free file slot for user space apps by using IORING_FILE_INDEX_ALLOC flag
in accept, open, and socket operations, but they need the app to use
direct accept or direct open, which not all apps are prepared to use yet.
To support apps that still need real fds, make use of the registration
feature easier. Let IORING_OP_FILES_UPDATE support choosing fixed file
slots, which will store picked fixed files slots in fd array and let cqe
return the number of slots allocated.
Suggested-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
[axboe: move flag to uapi io_uring header, change goto to break, init]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
New support:
- Tegra gpcdma Driver support
- Qualcomm SM8350, Sm8450 and SC7280 Device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- Deprecate '#dma-channels' & '#dma-requests' bindings
- Driver updates for stm32, ptdma idsx etc
-----BEGIN PGP SIGNATURE-----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=ANxH
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
Pavel Begunkov