This change introduces GICv5 load/put. Additionally, it plumbs in
save/restore for:
* PPIs (ICH_PPI_x_EL2 regs)
* ICH_VMCR_EL2
* ICH_APR_EL2
* ICC_ICSR_EL1
A GICv5-specific enable bit is added to struct vgic_vmcr as this
differs from previous GICs. On GICv5-native systems, the VMCR only
contains the enable bit (driven by the guest via ICC_CR0_EL1.EN) and
the priority mask (PCR).
A struct gicv5_vpe is also introduced. This currently only contains a
single field - bool resident - which is used to track if a VPE is
currently running or not, and is used to avoid a case of double load
or double put on the WFI path for a vCPU. This struct will be extended
as additional GICv5 support is merged, specifically for VPE doorbells.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-18-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
As part of booting the system and initialising KVM, create and
populate a mask of the implemented PPIs. This mask allows future PPI
operations (such as save/restore or state, or syncing back into the
shadow state) to only consider PPIs that are actually implemented on
the host.
The set of implemented virtual PPIs matches the set of implemented
physical PPIs for a GICv5 host. Therefore, this mask represents all
PPIs that could ever by used by a GICv5-based guest on a specific
host, albeit pre-filtered by what we support in KVM (see next
paragraph).
Only architected PPIs are currently supported in KVM with
GICv5. Moreover, as KVM only supports a subset of all possible PPIS
(Timers, PMU, GICv5 SW_PPI) the PPI mask only includes these PPIs, if
present. The timers are always assumed to be present; if we have KVM
we have EL2, which means that we have the EL1 & EL2 Timer PPIs. If we
have a PMU (v3), then the PMUIRQ is present. The GICv5 SW_PPI is
always assumed to be present.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-12-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
- Add more CPUCFG mask bits.
- Improve feature detection.
- Add lazy load support for FPU and binary translation (LBT) register state.
- Fix return value for memory reads from and writes to in-kernel devices.
- Add support for detecting preemption from within a guest.
- Add KVM steal time test case to tools/selftests.
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception.
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process.
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers.
- More pKVM fixes for features that are not supposed to be exposed to
guests.
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor.
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding.
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest.
- Preliminary work for guest GICv5 support.
- A bunch of debugfs fixes, removing pointless custom iterators stored
in guest data structures.
- A small set of FPSIMD cleanups.
- Selftest fixes addressing the incorrect alignment of page
allocation.
- Other assorted low-impact fixes and spelling fixes.
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that enlisted
help from the architecture's page table management to build hypervisor
page tables, in particular enabling sharing the last level of page
tables. This however was a lot of code (~3K lines) in order to support
KVM, and also blocked several features. The biggest advantages is
that the page size of userspace is completely independent of the
page size used by the guest: userspace can mix normal pages, THPs and
hugetlbfs as it sees fit, and in fact transparent hugepages were not
possible before. It's also now possible to have nested guests and
guests with huge pages running on the same host.
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware (contexted
switched around the fastpath run loop) and allowing direct access to data
MSRs and PMCs (restricted by the vPMU model). KVM still intercepts
access to control registers, e.g. to enforce event filtering and to
prevent the guest from profiling sensitive host state. This is more
accurate, since it has no risk of contention and thus dropped events, and
also has significantly less overhead.
For more information, see the commit message for merge commit bf2c3138ae
("Merge tag 'kvm-x86-pmu-6.20' of https://github.com/kvm-x86/linux into HEAD").
- Disallow changing the virtual CPU model if L2 is active, for all the same
reasons KVM disallows change the model after the first KVM_RUN.
- Fix a bug where KVM would incorrectly reject host accesses to PV MSRs
when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled, even if those
were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs, where KVM
would attempt to read CR3 configuring an async #PF entry.
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86
only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Only a few exports
that are intended for external usage, and those are allowed explicitly.
- When checking nested events after a vCPU is unblocked, ignore -EBUSY instead
of WARNing. Userspace can sometimes put the vCPU into what should be an
impossible state, and spurious exit to userspace on -EBUSY does not really
do anything to solve the issue.
- Also throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU
is in Wait-For-SIPI, which also resulted in playing whack-a-mole with syzkaller
stuffing architecturally impossible states into KVM.
- Add support for new Intel instructions that don't require anything beyond
enumerating feature flags to userspace.
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2.
- Add WARNs to guard against modifying KVM's CPU caps outside of the intended
setup flow, as nested VMX in particular is sensitive to unexpected changes
in KVM's golden configuration.
- Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts
when the suppression feature is enabled by the guest (currently limited to
split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor
Suppress EOI Broadcasts isn't an option as some userspaces have come to rely
on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective
of whether or not userspace I/O APIC supports Directed EOIs).
- Clean up KVM's handling of marking mapped vCPU pages dirty.
- Drop a pile of *ancient* sanity checks hidden behind in KVM's unused
ASSERT() macro, most of which could be trivially triggered by the guest
and/or user, and all of which were useless.
- Fold "struct dest_map" into its sole user, "struct rtc_status", to make it
more obvious what the weird parameter is used for, and to allow fropping
these RTC shenanigans if CONFIG_KVM_IOAPIC=n.
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y.
- Add a regression test for recent APICv update fixes.
- Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv()
to consolidate the updates, and to co-locate SVI updates with the updates
for KVM's own cache of ISR information.
- Drop a dead function declaration.
- Minor cleanups.
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to temporarily
switch to vmcs01 instead of deferring the update until the next nested
VM-Exit. The deferred updates approach directly contributed to several
bugs, was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans.
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page faults,
and instead always reflect them into the guest. Since KVM doesn't shadow
EPCM entries, EPCM violations cannot be due to KVM interference and
can't be resolved by KVM.
- Fix a bug where KVM would register its posted interrupt wakeup handler even
if loading kvm-intel.ko ultimately failed.
- Disallow access to vmcb12 fields that aren't fully supported, mostly to
avoid weirdness and complexity for FRED and other features, where KVM wants
enable VMCS shadowing for fields that conditionally exist.
- Print out the "bad" offsets and values if kvm-intel.ko refuses to load (or
refuses to online a CPU) due to a VMCS config mismatch.
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
- Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS
relies on an upcoming, publicly announced change in the APM to reduce the
set of conditions where hardware (i.e. KVM) *must* flush the RAP.
- Ignore nSVM intercepts for instructions that are not supported according to
L1's virtual CPU model.
- Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
for EPT Misconfig.
- Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
and allow userspace to restore nested state with GIF=0.
- Treat exit_code as an unsigned 64-bit value through all of KVM.
- Add support for fetching SNP certificates from userspace.
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
or VMSAVE on behalf of L2.
- Misc fixes and cleanups.
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
and extend x86's infrastructure to support EPT and NPT (for L2 guests).
- Extend several nested VMX tests to also cover nested SVM.
- Add a selftest for nested VMLOAD/VMSAVE.
- Rework the nested dirty log test, originally added as a regression test for
PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
and to hopefully make the test easier to understand and maintain.
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage
handling. SEV/SNP was the only user of the tracking and it can do it via
the RMP.
- Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE
and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to
avoid non-trivial complexity for something that no known VMM seems to be
doing and to avoid an API special case for in-place conversion, which
simply can't support unaligned sources.
- When populating guest_memfd memory, GUP the source page in common code and
pass the refcounted page to the vendor callback, instead of letting vendor
code do the heavy lifting. Doing so avoids a looming deadlock bug with
in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap
invalidate lock.
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space when
creating a vCPU-specific mapping of guest memory. Actually this bug
could not be hit even on x86, the only architecture with multiple
address spaces, but it's a bug nevertheless.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmNqwwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPaZAf/cJx5B67lnST272esz0j29MIuT/Ti
jnf6PI9b7XubKYOtNvlu5ZW4Jsa5dqRG0qeO/JmcXDlwBf5/UkWOyvqIXyiuTl0l
KcSUlKPtTgKZSoZpJpTppuuDE8FSYqEdcCmjNvoYzcJoPjmaeJbK6aqO0AkBbb6e
L5InrLV7nV9iua6rFvA0s/G8/Eq2DG8M9hTRHe6NcI/z4hvslOudvpUXtC8Jygoo
cV8vFavUwc+atrmvhAOLvSitnrjfNa4zcG6XMOlwXPfIdvi3zqTlQTgUpwGKiAGQ
RIDUVZ/9bcWgJqbPRsdEWwaYRkNQWc5nmrAHRpEEaYV/NeBBNf4v6qfKSw==
=SkJ1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
bf2c3138ae ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Add riscv vm satp modes in KVM selftests
- Transparent huge page support for G-stage
- Adjust the number of available guest irq files based on
MMIO register sizes in DeviceTree or ACPI
-----BEGIN PGP SIGNATURE-----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=PSMs
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.20-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.20
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Add riscv vm satp modes in KVM selftests
- Transparent huge page support for G-stage
- Adjust the number of available guest irq files based on
MMIO register sizes in DeviceTree or ACPI
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller accross
suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly.
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable when
the number of device interrupts is a multiple of 32.
- The usual device tree updates, cleanups and improvements all over the place.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmmJxQkQHHRnbHhAa2Vy
bmVsLm9yZwAKCRCmGPVMDXSYoapGEACTashfhOo6xIeLDiL4+AUbsj0l0uFyW4w4
PRErZxc1DcCOIL/AKYFVsFT85KfYM5ye+1bSTHC7evmjMSFvvDYm3Xss89k+mAoi
W/2QSpfC9viWuEFRstFvStcUNhxih+Sv+DCZM9UungaVAvZvnj0LoIjZsU3IjZOz
abbD/NMZgM3PSfw2LPCeurkhp3N91Yod6jaBtW2afE/wo1ftbXyaSFwSa++715Jz
BnDfNRxG5nMaXqBpwCPnZu5zKreQDiti1e0C/CtsGsbMfMOwkz9cr3LRMGtIoYxa
xnioc2ckL7wy3oVh7efVFTe7el61hYWbx1fbx+D4mv1mrOYYLyu59o2iKBkY1MP/
KKNRXwtS9HbezT6DHsNn7pX7ETdKNfdtF84/qxvYDHaog53Gy20ve4ioDOjx6VIG
z0rmwklACUJ1zp57+s6sYGJBCQakizwb5axgQ1RXG75sNrWLbsklPqrb+U7L7oDa
KAkwNShms4ZjNb5QHEPqB3IcUxbFgnuArZci7A6nhQfe9sDwWJafWNGnjMUuUdK1
fx0e1UkI9Gy+2yBKUJvZUZL4u93ToJUgX0Ucc37VDz9WaFFTSco1jadT9CCDKraU
gU3NHZeBIjT1xsk1Slnjq8k3Lp9b6Q7qNWL3u/4HfeMg8QwW+CM29xy5a0P5ifrc
v6W352Y1Zg==
=ZMMl
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
Currently, KVM assumes the minimum of implemented HGEIE bits and
"BIT(gc->guest_index_bits) - 1" as the number of guest files available
across all CPUs. This will not work when CPUs have different number
of guest files because KVM may incorrectly allocate a guest file on a
CPU with fewer guest files.
To address above, during initialization, calculate the number of
available guest interrupt files according to MMIO resources and
constrain the number of guest interrupt files that can be allocated
by KVM.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260104133457.57742-1-luxu.kernel@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Now that there is support for creating a GICv5-based guest with KVM,
check that the hardware itself supports virtualisation, skipping the
setting of struct gic_kvm_info if not.
Note: If native GICv5 virt is not supported, then nor is
FEAT_GCIE_LEGACY, so we are able to skip altogether.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-33-sascha.bischoff@arm.com
[maz: cosmetic changes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
To probe an IWB in an ACPI based system it is required:
- to implement the IORT functions handling the IWB IORT node and create
functions to retrieve IWB firmware information
- to augment the driver to match the DSDT ACPI "ARMH0003" device and
retrieve the IWB wire and trigger mask from the GSI interrupt descriptor
in the IWB msi_domain_ops.msi_translate() function
Make the required driver changes to enable IWB probing in ACPI systems.
The GICv5 GSI format requires special handling for IWB routed IRQs.
Add IWB GSI detection to the top level driver gic_v5_get_gsi_domain_id()
function so that the correct IRQ domain for a GSI can be detected by
parsing the GSI and check whether it is an IWB-backed IRQ or not.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-6-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On ACPI ARM64 systems the GICv5 ITS configuration and translate frames
are described in the MADT table.
Refactor the current GICv5 ITS driver code to share common functions
between ACPI and OF and implement ACPI probing in the GICv5 ITS driver.
Add iort_msi_xlate() to map a device ID and retrieve an MSI controller
fwnode node for ACPI systems and update pci_msi_map_rid_ctlr_node() to
use it in its ACPI code path.
Add the required functions to IORT code for deviceID retrieval and IRQ
domain registration and look-up so that the GICv5 ITS driver in an
ACPI based system can be successfully probed.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-5-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On ARM64 ACPI systems GICv5 IRSes are described in MADT sub-entries.
Add the required plumbing to parse MADT IRS firmware table entries and
probe the IRS components in ACPI.
Augment the irqdomain_ops.translate() for PPI and SPI IRQs in order to
provide support for their ACPI based firmware translation.
Implement an irqchip ACPI based callback to initialize the global GSI
domain upon an MADT IRS detection.
The IRQCHIP_ACPI_DECLARE() entry in the top level GICv5 driver is only used
to trigger the IRS probing (ie the global GSI domain is initialized once on
the first call on multi-IRS systems); IRS probing takes place by calling
acpi_table_parse_madt() in the IRS sub-driver, that probes all IRSes
in sequence.
Add a new ACPI interrupt model so that it can be detected at runtime and
distinguished from previous GIC architecture models.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-4-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an
Interrupt Controller (ICU) that supports interrupts from external pins IRQ0
to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15.
INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while
INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are
exposed via a separate register space.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register.
- Add AVEC basic support.
- Use 64-bit register definition for EIOINTC.
- Add KVM timer test cases for tools/selftests.
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of
exits (and worse performance) on z10 and earlier processor;
ESCA was introduced by z114/z196 in 2010.
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO SPTE
caching is disabled, as there can't be any relevant SPTEs to zap.
- Relocate a misplaced export.
- Fix an async #PF bug where KVM would clear the completion queue when the
guest transitioned in and out of paging mode, e.g. when handling an SMI and
then returning to paged mode via RSM.
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown, keeping
the notifier registered is ok; the kernel does not use the MSRs and the
callback will run cleanly and restore host MSRs if the CPU manages to
return to userspace before the system goes down.
- Use the checked version of {get,put}_user().
- Fix a long-lurking bug where KVM's lack of catch-up logic for periodic APIC
timers can result in a hard lockup in the host.
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections.
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the latter
behind CONFIG_CPU_MITIGATIONS.
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast path;
the only reason they were handled in the fast path was to paper of a bug
in the core #MC code, and that has long since been fixed.
- Add emulator support for AVX MOV instructions, to play nice with emulated
devices whose guest drivers like to access PCI BARs with large multi-byte
instructions.
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs.
- Fix the worst of KVM's lack of EFER.LMSLE emulation.
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
- Fix incorrect handling of selective CR0 writes when checking intercepts
during emulation of L2 instructions.
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
VMRUN and #VMEXIT.
- Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
interrupt if the guest patched the underlying code after the VM-Exit, e.g.
when Linux patches code with a temporary INT3.
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
userspace, and extend KVM "support" to all policy bits that don't require
any actual support from KVM.
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of the
current vCPU state, partly as worthwhile cleanup, but mostly to pave the
way for tracking per-root TLB flushes, and elide EPT flushes on pCPU
migration if the root is clean from a previous flush.
- Add a few missing nested consistency checks.
- Rip out support for doing "early" consistency checks via hardware as the
functionality hasn't been used in years and is no longer useful in general;
replace it with an off-by-default module param to WARN if hardware fails
a check that KVM does not perform.
- Fix a currently-benign bug where KVM would drop the guest's SPEC_CTRL[63:32]
on VM-Enter.
- Misc cleanups.
- Overhaul the TDX code to address systemic races where KVM (acting on behalf
of userspace) could inadvertantly trigger lock contention in the TDX-Module;
KVM was either working around these in weird, ugly ways, or was simply
oblivious to them (though even Yan's devilish selftests could only break
individual VMs, not the host kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a TDX vCPU,
if creating said vCPU failed partway through.
- Fix a few sparse warnings (bad annotation, 0 != NULL).
- Use struct_size() to simplify copying TDX capabilities to userspace.
- Fix a bug where TDX would effectively corrupt user-return MSR values if the
TDX Module rejects VP.ENTER and thus doesn't clobber host MSRs as expected.
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU system/VM.
- Forcefully override ARCH from x86_64 to x86 to play nice with specifying
ARCH=x86_64 on the command line.
- Extend a bunch of nested VMX to validate nested SVM as well.
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test to
verify KVM can save/restore nested VMX state when L1 is using 5-level
paging, but L2 is not.
- Clean up the guest paging code in anticipation of sharing the core logic for
nested EPT and nested NPT.
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety of
rough edges in guest_memfd along the way.
- Define a CLASS to automatically handle get+put when grabbing a guest_memfd
from a memslot to make it harder to leak references.
- Enhance KVM selftests to make it easer to develop and debug selftests like
those added for guest_memfd NUMA support, e.g. where test and/or KVM bugs
often result in hard-to-debug SIGBUS errors.
- Misc cleanups.
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU workqueue for
irqfd cleanup.
- Fix a goof in the dirty ring documentation.
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkvMa8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMlFwf+Ow7zOYUuELSQ+Jn+hOYXiCNrdBDx
ZamvMU8kLPr7XX0Zog6HgcMm//qyA6k5nSfqCjfsQZrIhRA/gWJ61jz1OX/Jxq18
pJ9Vz6epnEPYiOtBwz+v8OS8MqDqVNzj2i6W1/cLPQE50c1Hhw64HWS5CSxDQiHW
A7PVfl5YU12lW1vG3uE0sNESDt4Eh/spNM17iddXdF4ZUOGublserjDGjbc17E7H
8BX3DkC2plqkJKwtjg0ae62hREkITZZc7RqsnftUkEhn0N0H9+rb6NKUyzIVh9NZ
bCtCjtrKN9zfZ0Mujnms3ugBOVqNIputu/DtPnnFKXtXWSrHrgGSNv5ewA==
=PEcw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
Including:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason. This has good potential for
unifying more IO page-table implementations and making future
enhancements more easy. But this also needed quite some fixes during
development. All known issues have been fixed, but my feeling is that
there is a higher potential than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb().
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA.
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for funky
Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support.
- Move ARM IO-pgtable selftests to kunit.
- Device leak fixes for a couple of drivers.
- Random smaller fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=KG7j
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
Future changes will require KVM to be able to perform deactivations
by writing to the physical CPU interface. Add the corresponding
VA to the kvm_info structure, and let KVM stash it.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-3-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The GICH_HCR description is missing a bunch of control bits that
control the maintenance interrupt. Add them.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-2-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
This intends to have high coverage of the page table format functions and
the IOMMU implementation itself, exercising the various corner cases.
The kunit tests can be run in the kunit framework, using commands like:
tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 --make_options LLVM=-19 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_uml --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386 --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386pae --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_X86_PAE=y
There are several interesting corner cases on the 32 bit platforms that
need checking.
Like the generic tests, these are run on the format's configuration list
using kunit "params". This also checks the core iommu parts of the page
table code as it enters the logic through a mock iommu_domain.
The following are checked:
- PT_FEAT_DYNAMIC_TOP properly adds levels one by one
- Every page size can be iommu_map()'d, and mapping creates that size
- iommu_iova_to_phys() works with every page size
- Test converting OA -> non present -> OA when the two OAs overlap and
free table levels
- Test that unmap stops at holes, unmap doesn't split, and unmap returns
the right values for partial unmap requests
- Randomly map/unmap. Checks map with random sizes, that map fails when
hitting collisions doing nothing, unmap/map with random intersections and
full unmap of random sizes. Also checks iommu_iova_to_phys() with random
sizes
- Check for memory leaks by monitoring NR_SECONDARY_PAGETABLE
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This code is now completely unused, and nobody will ever miss it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org
The presence of FEAT_GCIE_LEGACY is now handled as a CPU
feature. Therefore, drop the check and flag from the GIC driver and
gic_kvm_info as it is no longer required or used by KVM.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaIezbRccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFr/eAQDY5NIG5cR6ZcAWnPQLmGWpz2ou
pq4Jhn9E/mGR3n5L1AEAsJpfLLpOsmnLBdwfbjmW59gGsa8k3i5tjWEOJ6yzAwk=
=r+sp
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
KVM IRQ changes for 6.17
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large numbers
of VMs. Such use cases typically don't actually use irqbypass, but
eliminating the pointless registration is a future problem to solve as it
likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC,
and PIT emulation at compile time.
- Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c.
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibited AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving IsRunning
clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Dedup x86's device posted IRQ code, as the vast majority of functionality
can be shared verbatime between SVM and VMX.
- Harden the device posted IRQ code against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- Generate GA Log interrupts if and only if the target vCPU is blocking, i.e.
only if KVM needs a notification in order to wake the vCPU.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM to
a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e.
ensure an eventfd is bound to at most one irqfd through the entire host,
and add a selftest to verify eventfd:irqfd bindings are globally unique.
The armada-370-xp irqchip fails in some randconfig builds because
of a missing declaration:
In file included from drivers/irqchip/irq-armada-370-xp.c:23:
include/linux/irqchip/irq-msi-lib.h:25:39: error: 'struct msi_domain_info' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a forward declaration for the msi_domain_info structure.
[ tglx: Fixed up the subsystem prefix. Is it really that hard to get right? ]
Fixes: e51b27438a ("irqchip: Make irq-msi-lib.h globally available")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250710080021.2303640-1-arnd@kernel.org
Populate the gic_kvm_info struct based on support for
FEAT_GCIE_LEGACY. The struct is used by KVM to probe for a compatible
GIC.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250627100847.1022515-3-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The GICv5 architecture implements the Interrupt Wire Bridge (IWB) in
order to support wired interrupts that cannot be connected directly
to an IRS and instead uses the ITS to translate a wire event into
an IRQ signal.
Add the wired-to-MSI IWB driver to manage IWB wired interrupts.
An IWB is connected to an ITS and it has its own deviceID for all
interrupt wires that it manages; the IWB input wire number must be
exposed to the ITS as an eventID with a 1:1 mapping.
This eventID is not programmable and therefore requires a new
msi_alloc_info_t flag to make sure the ITS driver does not allocate
an eventid for the wire but rather it uses the msi_alloc_info_t.hwirq
number to gather the ITS eventID.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-29-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture implements Interrupt Translation Service
(ITS) components in order to translate events coming from peripherals
into interrupt events delivered to the connected IRSes.
Events (ie MSI memory writes to ITS translate frame), are translated
by the ITS using tables kept in memory.
ITS translation tables for peripherals is kept in memory storage
(device table [DT] and Interrupt Translation Table [ITT]) that
is allocated by the driver on boot.
Both tables can be 1- or 2-level; the structure is chosen by the
driver after probing the ITS HW parameters and checking the
allowed table splits and supported {device/event}_IDbits.
DT table entries are allocated on demand (ie when a device is
probed); the DT table is sized using the number of supported
deviceID bits in that that's a system design decision (ie the
number of deviceID bits implemented should reflect the number
of devices expected in a system) therefore it makes sense to
allocate a DT table that can cater for the maximum number of
devices.
DT and ITT tables are allocated using the kmalloc interface;
the allocation size may be smaller than a page or larger,
and must provide contiguous memory pages.
LPIs INTIDs backing the device events are allocated one-by-one
and only upon Linux IRQ allocation; this to avoid preallocating
a large number of LPIs to cover the HW device MSI vector
size whereas few MSI entries are actually enabled by a device.
ITS cacheability/shareability attributes are programmed
according to the provided firmware ITS description.
The GICv5 partially reuses the GICv3 ITS MSI parent infrastructure
and adds functions required to retrieve the ITS translate frame
addresses out of msi-map and msi-parent properties to implement
the GICv5 ITS MSI parent callbacks.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-28-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
An IRS supports Logical Peripheral Interrupts (LPIs) and implement
Linux IPIs on top of it.
LPIs are used for interrupt signals that are translated by a
GICv5 ITS (Interrupt Translation Service) but also for software
generated IRQs - namely interrupts that are not driven by a HW
signal, ie IPIs.
LPIs rely on memory storage for interrupt routing and state.
LPIs state and routing information is kept in the Interrupt
State Table (IST).
IRSes provide support for 1- or 2-level IST tables configured
to support a maximum number of interrupts that depend on the
OS configuration and the HW capabilities.
On systems that provide 2-level IST support, always allow
the maximum number of LPIs; On systems with only 1-level
support, limit the number of LPIs to 2^12 to prevent
wasting memory (presumably a system that supports a 1-level
only IST is not expecting a large number of interrupts).
On a 2-level IST system, L2 entries are allocated on
demand.
The IST table memory is allocated using the kmalloc() interface;
the allocation required may be smaller than a page and must be
made up of contiguous physical pages if larger than a page.
On systems where the IRS is not cache-coherent with the CPUs,
cache mainteinance operations are executed to clean and
invalidate the allocated memory to the point of coherency
making it visible to the IRS components.
On GICv5 systems, IPIs are implemented using LPIs.
Add an LPI IRQ domain and implement an IPI-specific IRQ domain created
as a child/subdomain of the LPI domain to allocate the required number
of LPIs needed to implement the IPIs.
IPIs are backed by LPIs, add LPIs allocation/de-allocation
functions.
The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs.
Associate an IPI irqchip with IPI IRQ descriptors to provide
core code with the irqchip.ipi_send_single() method required
to raise an IPI.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 Interrupt Routing Service (IRS) component implements
interrupt management and routing in the GICv5 architecture.
A GICv5 system comprises one or more IRSes, that together
handle the interrupt routing and state for the system.
An IRS supports Shared Peripheral Interrupts (SPIs), that are
interrupt sources directly connected to the IRS; they do not
rely on memory for storage. The number of supported SPIs is
fixed for a given implementation and can be probed through IRS
IDR registers.
SPI interrupt state and routing are managed through GICv5
instructions.
Each core (PE in GICv5 terms) in a GICv5 system is identified with
an Interrupt AFFinity ID (IAFFID).
An IRS manages a set of cores that are connected to it.
Firmware provides a topology description that the driver uses
to detect to which IRS a CPU (ie an IAFFID) is associated with.
Use probeable information and firmware description to initialize
the IRSes and implement GICv5 IRS SPIs support through an
SPI-specific IRQ domain.
The GICv5 IRS driver:
- Probes IRSes in the system to detect SPI ranges
- Associates an IRS with a set of cores connected to it
- Adds an IRQchip structure for SPI handling
SPIs priority is set to a value corresponding to the lowest
permissible priority in the system (taking into account the
implemented priority bits of the IRS and CPU interface).
Since all IRQs are set to the same priority value, the value
itself does not matter as long as it is a valid one.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 CPU interface implements support for PE-Private Peripheral
Interrupts (PPI), that are handled (enabled/prioritized/delivered)
entirely within the CPU interface hardware.
To enable PPI interrupts, implement the baseline GICv5 host kernel
driver infrastructure required to handle interrupts on a GICv5 system.
Add the exception handling code path and definitions for GICv5
instructions.
Add GICv5 PPI handling code as a specific IRQ domain to:
- Set-up PPI priority
- Manage PPI configuration and state
- Manage IRQ flow handler
- IRQs allocation/free
- Hook-up a PPI specific IRQchip to provide the relevant methods
PPI IRQ priority is chosen as the minimum allowed priority by the
system design (after probing the number of priority bits implemented
by the CPU interface).
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-20-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When unmapping a vLPI, WARN if nullifying vCPU affinity fails, not just if
failure occurs when freeing an ITE. If undoing vCPU affinity fails, then
odds are very good that vLPI state tracking has has gotten out of whack,
i.e. that KVM and the GIC disagree on the state of an IRQ/vLPI. At best,
inconsistent state means there is a lurking bug/flaw somewhere. At worst,
the inconsistency could eventually be fatal to the host, e.g. if an ITS
command fails because KVM's view of things doesn't match reality/hardware.
Note, only the call from kvm_arch_irq_bypass_del_producer() by way of
kvm_vgic_v4_unset_forwarding() doesn't already WARN. Common KVM's
kvm_irq_routing_update() WARNs if kvm_arch_update_irqfd_routing() fails.
For that path, if its_unmap_vlpi() fails in kvm_vgic_v4_unset_forwarding(),
the only possible causes are that the GIC doesn't have a v4 ITS (from
its_irq_set_vcpu_affinity()):
/* Need a v4 ITS */
if (!is_v4(its_dev->its))
return -EINVAL;
guard(raw_spinlock)(&its_dev->event_map.vlpi_lock);
/* Unmap request? */
if (!info)
return its_vlpi_unmap(d);
or that KVM has gotten out of sync with the GIC/ITS (from its_vlpi_unmap()):
if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d))
return -EINVAL;
All of the above failure scenarios are warnable offences, as they should
never occur absent a kernel/KVM bug.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/all/aFWY2LTVIxz5rfhh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support
-----BEGIN PGP SIGNATURE-----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=cu98
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
- Switch the MSI decriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in the
PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper API
function calls. People will never understand that APIs exist for a
reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory extensible
to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to undo
the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain creation
time to avoid redundant (and in case of ARM/GIC-V3-ITS confusing)
invocations on every allocation.
In combination with the new teardown callback this removes some ugly
hacks in the GIC-V3-ITS driver, which pretended to work around the
short comings of the core code so far. With this update the code is
correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI parent
domain creation helper and convert a bunch of (PCI/)MSI drivers over to
the modern MSI parent mechanism. This is the first step to get rid of
at least one incarnation of the three PCI/MSI management schemes.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=OBMj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
Move irq-msi-lib.h into include/linux/irqchip, making it available
to compilation units outside of drivers/irqchip.
This requires some churn in drivers to fetch it from the new location,
generated using this script:
git grep -l -w \"irq-msi-lib.h\" | \
xargs sed -i -e 's:"irq-msi-lib.h":\<linux/irqchip/irq-msi-lib.h\>:'
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-2-maz@kernel.org
On the Renesas RZ/V2H(P) family of SoCs, DMAC IPs are connected
to the Interrupt Control Unit (ICU).
For DMA transfers, a request number must be registered with the
ICU, which means that the DMAC driver has to be able to instruct
the ICU driver with the registration of such id.
Export rzv2h_icu_register_dma_req() so that the DMAC driver can
register the DMAC request number.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250423143422.3747702-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use
any of its symbols). Remove the header and make the driver stop using the
config structure.
[ tglx: Mop up coding style ]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
RISC-V IMSIC interrupt controller provides IPI and MSI support.
Currently, DT based drivers setup the IPI feature early during boot but
defer setting up the MSI functionality. However, in ACPI systems, PCI
subsystem is probed early and assume MSI controller is already setup.
Hence, both IPI and MSI features need to be initialized early itself.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-16-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to expand
any of this for new required functionality.
The new function takes a pointer to a data structure as argument. The
data structure combines all existing parameters and allows for easy
extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization before
the new domain is published, so that concurrent usage sites won't see
a half initialized interrupt domain. Similar problems exist on
teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible workarounds
at the driver level.
- The usual small improvements all over the place
- Drivers
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version to
allow building the latter as a module for multi-platform kernels.
- Enable MSI support for Armada 370XP on platforms which do not support
IPIs.
- The usual small fixes and enhancements all over the place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaVJbUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXTuD/9Tc9BhY5CW7HQkdPQu2Db1O+esprkQ
Uo9lMpTTpPiy9btg4LONzLf4mjbufZpyKBxkRWoZFO0Zj5q4UE9NZYh7EcxrF5Tl
CIFJmyteLsYuOyCmPrtSDSovonXjQKYBE3u2LVJNNkwEkhYbYW9sqIKeT8nneLv6
53gd28ESFUEUjHNTblw/eXviweyUKSXc0qyg+3hgZQPMoh9RkdkEPvyaw9Y/s5Ce
FelLLxzMqX86dR2TJMLqiaGiMpUu/kl+Yz2m5c77TwA2D68qjhHywbtKtlH7b3C6
LMHu2dMrrKSJrLL8roVIYJdHAd1TKWVdnYhqv9WBHFTu1sDuztpR44mewbo8exUU
L2RgVSGYNmeFC3p4wztWYSQfIVa9uOg7+TnJJdh7G0jLIeKM/TbufWqDAJAuoVPL
QhGbZ5xNbZJZ8bvhhItjxpRN/kPs44p3mUGyRJBQzm+mDN118bqfmQzhLcwRbfE2
smp73SQzg9alG2rGdNVEqkKmp8zhg2Crx2VCeVdgbeOxWQRet9zLWcp4FfCEUE9e
eK3iEi8z+rmwafaf3rsxYdrdIRLaUmcni0v7R/16cJH/Cs7bU3Re8XyGhevo3lsO
pJiP5wZDxbckwXNpLm3S/qPDW7vSCnuFPF7QmOvC3a70PsD+E4NKUgiwJuHtn/ZV
pFBKzbQgCsowQA==
=QCRH
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
Kuan-Wei Chiu has significantly reworked the min_heap library code and
has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally more
rational.
- Kuan-Wei Chiu has sent along some maintenance work against our sorting
library code in the series "lib/sort: Optimizations and cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB
command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA
jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j
fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg=
=Stxz
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
vmovp_lock is abused in a number of cases to serialise updates
to vlpi_count[] and deal with map/unmap of a VM to ITSs.
Instead, provide a per-VM lock and revisit the use of vlpi_count[]
so that it is always wrapped in this per-VM vmapp_lock.
This reduces the potential contention on a concurrent VMOVP command,
and paves the way for subsequent VPE locking that holding vmovp_lock
actively prevents due to the lock ordering.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
Now that cpumask types are split out to a separate smaller header, many
frequently included core headers may switch to using it.
Link: https://lkml.kernel.org/r/20240528005648.182376-7-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Yury Norov <yury.norov@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The distributor and PMR/RPR can present different views of the interrupt
priority space dependent upon the values of GICD_CTLR.DS and
SCR_EL3.FIQ. Currently we treat the distributor's view of the priority
space as canonical, and when the two differ we change the way we handle
values in the PMR/RPR, using the `gic_nonsecure_priorities` static key
to decide what to do.
This approach works, but it's sub-optimal. When using pseudo-NMI we
manipulate the distributor rarely, and we manipulate the PMR/RPR
registers very frequently in code spread out throughout the kernel (e.g.
local_irq_{save,restore}()). It would be nicer if we could use fixed
values for the PMR/RPR, and dynamically choose the values programmed
into the distributor.
This patch changes the GICv3 driver and arm64 code accordingly. PMR
values are chosen at compile time, and the GICv3 driver determines the
appropriate values to program into the distributor at boot time. This
removes the need for the `gic_nonsecure_priorities` static key and
results in smaller and better generated code for saving/restoring the
irqflags.
Before this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d503201f nop
| 10: d2800c00 mov x0, #0x60 // #96
| 14: d5184600 msr icc_pmr_el1, x0
| 18: d65f03c0 ret
| 1c: d2801400 mov x0, #0xa0 // #160
| 20: 17fffffd b 14 <outlined_local_irq_disable+0x14>
After this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d2801800 mov x0, #0xc0 // #192
| 10: d5184600 msr icc_pmr_el1, x0
| 14: d65f03c0 ret
... with 3 fewer instructions per call.
For defconfig + CONFIG_PSEUDO_NMI=y, this results in a minor saving of
~4K of text, and will make it easier to make further improvements to the
way we manipulate irqflags and DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time.
In preparation for using dynamic priorities, place the priorities in
variables and update the code to pass these as parameters. Users of
GICD_INT_DEF_PRI_X4 are modified to replicate the priority byte using
REPEAT_BYTE_U32().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The RISC-V advanced interrupt architecture (AIA) specification defines
advanced platform-level interrupt controller (APLIC) which has two modes
of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)
In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs)
as a local external interrupt.
Add a platform irqchip driver for the RISC-V APLIC direct-mode to
support RISC-V platforms having only wired interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-7-apatel@ventanamicro.com
The RISC-V advanced interrupt architecture (AIA) specification
defines a new MSI controller called incoming message signalled
interrupt controller (IMSIC) which manages MSI on per-HART (or
per-CPU) basis. It also supports IPIs as software injected MSIs.
(For more details refer https://github.com/riscv/riscv-aia)
Add an early irqchip driver for RISC-V IMSIC which sets up the
IMSIC state and provide IPIs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-3-apatel@ventanamicro.com
Development updates for v6.5-rc1
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
-----BEGIN PGP SIGNATURE-----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=/AbD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Building with "W=1" warns about missing declarations for
two functions in the mmp irqchip driver:
drivers/irqchip/irq-mmp.c:248:13: error: no previous prototype for 'icu_init_irq'
drivers/irqchip/irq-mmp.c:271:13: error: no previous prototype for 'mmp2_init_icu'
The declarations are present in an unused header, but since there is no
caller, it's best to just remove the functions and the header completely,
making the driver DT-only to match the state of the platform.
Fixes: 77acc85ce7 ("ARM: mmp: remove device definitions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-2-arnd@kernel.org
With the last non-OF, non-ACPI user of the GIC being removed in
e73307b9eb ("ARM: cns3xxx: remove entire platform"), we can finally
drop the entry point and do some minor cleanup.
We also make the driver depend on CONFIG_OF, which is required
even when CONFIG_ACPI is selected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230315130218.3212033-1-maz@kernel.org
The functions icu_init_irq and mmp2_init_icu are exported
from this code, so declare them in the header file to avoid
the following sparse warnings:
drivers/irqchip/irq-mmp.c:248:13: warning: symbol 'icu_init_irq' was not declared. Should it be static?
drivers/irqchip/irq-mmp.c:271:13: warning: symbol 'mmp2_init_icu' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
[maz: fixup commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220724222152.551850-1-ben-linux@fluff.org
Sascha Bischoff