- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
Jan Kara reported the following bug triggering on 6.0.5-rt14 running dbench
on XFS on arm64.
kernel BUG at fs/inode.c:625!
Internal error: Oops - BUG: 0 [#1] PREEMPT_RT SMP
CPU: 11 PID: 6611 Comm: dbench Tainted: G E 6.0.0-rt14-rt+ #1
pc : clear_inode+0xa0/0xc0
lr : clear_inode+0x38/0xc0
Call trace:
clear_inode+0xa0/0xc0
evict+0x160/0x180
iput+0x154/0x240
do_unlinkat+0x184/0x300
__arm64_sys_unlinkat+0x48/0xc0
el0_svc_common.constprop.4+0xe4/0x2c0
do_el0_svc+0xac/0x100
el0_svc+0x78/0x200
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x19c/0x1a0
It also affects 6.1-rc7-rt5 and affects a preempt-rt fork of 5.14 so this
is likely a bug that existed forever and only became visible when ARM
support was added to preempt-rt. The same problem does not occur on x86-64
and he also reported that converting sb->s_inode_wblist_lock to
raw_spinlock_t makes the problem disappear indicating that the RT spinlock
variant is the problem.
Which in turn means that RT mutexes on ARM64 and any other weakly ordered
architecture are affected by this independent of RT.
Will Deacon observed:
"I'd be more inclined to be suspicious of the slowpath tbh, as we need to
make sure that we have acquire semantics on all paths where the lock can
be taken. Looking at the rtmutex code, this really isn't obvious to me
-- for example, try_to_take_rt_mutex() appears to be able to return via
the 'takeit' label without acquire semantics and it looks like we might
be relying on the caller's subsequent _unlock_ of the wait_lock for
ordering, but that will give us release semantics which aren't correct."
Sebastian Andrzej Siewior prototyped a fix that does work based on that
comment but it was a little bit overkill and added some fences that should
not be necessary.
The lock owner is updated with an IRQ-safe raw spinlock held, but the
spin_unlock does not provide acquire semantics which are needed when
acquiring a mutex.
Adds the necessary acquire semantics for lock owner updates in the slow path
acquisition and the waiter bit logic.
It successfully completed 10 iterations of the dbench workload while the
vanilla kernel fails on the first iteration.
[ bigeasy@linutronix.de: Initial prototype fix ]
Fixes: 700318d1d7 ("locking/rtmutex: Use acquire/release semantics")
Fixes: 23f78d4a03 ("[PATCH] pi-futex: rt mutex core")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221202100223.6mevpbl7i6x5udfd@techsingularity.net
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmOTQvYACgkQ4CHKc/GJ
qRCaqQf/UjCDmj1vYKcsTzp5L4MDXdQPA7dKtytbnZtROtClVNUzB0jODsfeMI7C
SwbDJRoUU1y99GRFYIx9oGji1q7TYOWS/PsZxOGkv8ILommmQ1kJdZdxt9rOqYNg
3mjCZoQmZMIRipLDrN55C096Mi+mI89kkE4Lkyrigpmxvc0KyX6QBerr+VmaBMHw
DjmFC6Gj+ZH2AX6z7AzOF1gZ42gPBQUjWdHFRcY41dShOQZNl2FPT5ITAvotlJlH
9mj6woCqW936UOcpUl+Qqk7mekDJb1hqmYXV2VAlhprBi6Vcd9PU6GmPPb6w51bS
HkSNNYjkbuNxBXY13PUPcR0hEHv9zw==
=AlWx
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLOB deprecation and SLUB_TINY
The SLOB allocator adds maintenance burden and stands in the way of
API improvements [1]. Deprecate it by renaming the config option (to
make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
SLUB should be used instead as SLAB will be the next on the removal
list.
Based on reports from a riscv k210 board with 8MB RAM, add a
CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
expense of scalability. This has resolved the k210 regression [2] so
in case there are no others (that wouldn't be resolvable by further
tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.
Existing defconfigs with CONFIG_SLOB are converted to
CONFIG_SLUB_TINY.
- kmalloc() slub_debug redzone improvements
A series from Feng Tang that builds on the tracking or requested size
for kmalloc() allocations (for caches with debugging enabled) added
in 6.1, to make redzone checks consider the requested size and not
the rounded up one, in order to catch more subtle buffer overruns.
Includes new slub_kunit test.
- struct slab fields reordering to accomodate larger rcu_head
RCU folks would like to grow rcu_head with debugging options, which
breaks current struct slab layout's assumptions, so reorganize it to
make this possible.
- Miscellaneous improvements/fixes:
- __alloc_size checking compiler workaround (Kees Cook)
- Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
- Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
- Correct SLUB's percpu allocation estimates (Baoquan He)
- Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
- Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
- Dead code removal in SLUB (Hyeonggon Yoo)
* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
mm, slub: split out allocations from pre/post hooks
mm/slub, kunit: Add a test case for kmalloc redzone check
mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
mm, slub: refactor free debug processing
mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
mm, slub: add CONFIG_SLUB_TINY
mm, slab: ignore hardened usercopy parameters when disabled
slab: Remove special-casing of const 0 size allocations
slab: Clean up SLOB vs kmalloc() definition
mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
mm/migrate: make isolate_movable_page() skip slab pages
mm/slab: move and adjust kernel-doc for kmem_cache_alloc
mm/slub, percpu: correct the calculation of early percpu allocation size
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmORzikACgkQUqAMR0iA
lPKF/g/7Bmcao3rJkZjEagsYY+s7rGhaFaSbML8FDdyE3UzeXLJOnNxBLrD0JIe9
XFW7+DMqr2uRxsab5C7APy0mrIWp/zCGyJ8CmBILnrPDNcAQ27OhFzxv6WlMUmEc
xEjGHrk5dFV96s63gyHGLkKGOZMd/cfcpy/QDOyg0vfF8EZCiPywWMbQQ2Ij8E50
N6UL70ExkoLjT9tzb8NXQiaDqHxqNRvd15aIomDjRrce7eeaL4TaZIT7fKnEcULz
0Lmdo8RUknonCI7Y00RWdVXMqqPD2JsKz3+fh0vBnXEN+aItwyxis/YajtN+m6l7
jhPGt7hNhCKG17auK0/6XVJ3717QwjI3+xLXCvayA8jyewMK14PgzX70hCws0eXM
+5M+IeXI4ze5qsq+ln9Dt8zfC+5HGmwXODUtaYTBWhB4nVWdL/CZ+nTv349zt+Uc
VIi/QcPQ4vq6EfsxUZR2r6Y12+sSH40iLIROUfqSchtujbLo7qxSNF5x7x9+rtff
nWuXo5OsjGE7TZDwn3kr0zSuJ+w/pkWMYQ7jch+A2WqUMYyGC86sL3At7ocL+Esq
34uvzwEgWnNySV8cLiMh34kBmgBwhAP34RhV0RS9iCv8kev2DV7pLQTs9V3QAjw9
EZnFDHATUdikgugaFKCeDV86R3wFgnRWWOdlRrRi6aAzFDqNcYk=
=1PTZ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
this_cpu_inc() on strong load-store architectures.
- Introduce new console_list_lock to synchronize a manipulation of the
list of registered consoles and their flags.
This is a first step in removing the big-kernel-lock-like behavior of
console_lock(). This semaphore still serializes console->write()
calbacks against:
- each other. It primary prevents potential races between early
and proper console drivers using the same device.
- suspend()/resume() callbacks and init() operations in some
drivers.
- various other operations in the tty/vt and framebufer
susbsystems. It is likely that console_lock() serializes even
operations that are not directly conflicting with the
console->write() callbacks here. This is the most complicated
big-kernel-lock aspect of the console_lock() that will be hard
to untangle.
- Introduce new console_srcu lock that is used to safely iterate and
access the registered console drivers under SRCU read lock.
This is a prerequisite for introducing atomic console drivers and
console kthreads. It will reduce the complexity of serialization
against normal consoles and console_lock(). Also it should remove the
risk of deadlock during critical situations, like Oops or panic, when
only atomic consoles are registered.
- Check whether the console is registered instead of enabled on many
locations. It was a historical leftover.
- Cleanly force a preferred console in xenfb code instead of a dirty
hack.
- A lot of code and comment clean ups and improvements.
* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
printk: htmldocs: add missing description
tty: serial: sh-sci: use setup() callback for early console
printk: relieve console_lock of list synchronization duties
tty: serial: kgdboc: use console_list_lock to trap exit
tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
tty: serial: kgdboc: use console_list_lock for list traversal
tty: serial: kgdboc: use srcu console list iterator
proc: consoles: use console_list_lock for list iteration
tty: tty_io: use console_list_lock for list synchronization
printk, xen: fbfront: create/use safe function for forcing preferred
netconsole: avoid CON_ENABLED misuse to track registration
usb: early: xhci-dbc: use console_is_registered()
tty: serial: xilinx_uartps: use console_is_registered()
tty: serial: samsung_tty: use console_is_registered()
tty: serial: pic32_uart: use console_is_registered()
tty: serial: earlycon: use console_is_registered()
tty: hvc: use console_is_registered()
efi: earlycon: use console_is_registered()
tty: nfcon: use console_is_registered()
serial_core: replace uart_console_enabled() with uart_console_registered()
...
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin).
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin).
- Remove FOLL_FORCE for stack setup (Kees Cook).
- Whilespace cleanups (Rolf Eike Beer, Kees Cook).
-----BEGIN PGP SIGNATURE-----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=ZDYk
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Most are small refactorings and bug fixes, but three things stand out:
switching timens (which got reverted before) looks solid now,
FOLL_FORCE has been removed (no failures seen yet across several weeks
in -next), and some whitespace cleanups (which are long overdue).
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin)
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)
- Remove FOLL_FORCE for stack setup (Kees Cook)
- Whitespace cleanups (Rolf Eike Beer, Kees Cook)"
* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: fix shift-out-of-bounds in check_special_flags
binfmt: Fix error return code in load_elf_fdpic_binary()
exec: Remove FOLL_FORCE for stack setup
binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
binfmt_elf: simplify error handling in load_elf_phdrs()
binfmt_elf: fix documented return value for load_elf_phdrs()
exec: simplify initial stack size expansion
binfmt: Fix whitespace issues
exec: Add comments on check_unsafe_exec() fs counting
ELF uapi: add spaces before '{'
selftests/timens: add a test for vfork+exit
fs/exec: switch timens when a task gets a new mm
This series adds instrumentation for memcpy(), memset(), and memmove() for
Clang v16+'s new function names that are used when the -fsanitize=thread
argument is given. It also fixes objtool warnings from KCSAN's volatile
instrumentation, and fixes a pair of typos in a pair of Kconfig options'
help clauses.
-----BEGIN PGP SIGNATURE-----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=/aBz
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
- Add instrumentation for memcpy(), memset(), and memmove() for Clang
v16+'s new function names that are used when the -fsanitize=thread
argument is given
- Fix objtool warnings from KCSAN's volatile instrumentation, and typos
in a pair of Kconfig options' help clauses
* tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Fix trivial typo in Kconfig help comments
objtool, kcsan: Add volatile read/write instrumentation to whitelist
kcsan: Instrument memcpy/memset/memmove with newer Clang
This pull request contains the following branches:
doc.2022.10.20a: Documentation updates. This is the second
in a series from an ongoing review of the RCU documentation.
fixes.2022.10.21a: Miscellaneous fixes.
lazy.2022.11.30a: Introduces a default-off Kconfig option that depends
on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or
rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce
delays. These delays result in significant power savings on
nearly idle Android and ChromeOS systems. These savings range
from a few percent to more than ten percent.
This series also includes several commits that change call_rcu()
to a new call_rcu_hurry() function that avoids these delays in
a few cases, for example, where timely wakeups are required.
Several of these are outside of RCU and thus have acks and
reviews from the relevant maintainers.
srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an
srcu_read_unlock_nmisafe() for architectures that support NMIs,
but which do not provide NMI-safe this_cpu_inc(). These NMI-safe
SRCU functions are required by the upcoming lockless printk()
work by John Ogness et al.
That printk() series depends on these commits, so if you pull
the printk() series before this one, you will have already
pulled in this branch, plus two more SRCU commits:
0cd7e350ab ("rcu: Make SRCU mandatory")
51f5f78a4f ("srcu: Make Tiny synchronize_srcu() check for readers")
These two commits appear to work well, but do not have
sufficient testing exposure over a long enough time for me to
feel comfortable pushing them unless something in mainline is
definitely going to use them immediately, and currently only
the new printk() work uses them.
torture.2022.10.18c: Changes providing minor but important increases
in test coverage for the new RCU polled-grace-period APIs.
torturescript.2022.10.20a: Changes that avoid redundant kernel builds,
thus providing about a 30% speedup for the torture.sh acceptance
test.
-----BEGIN PGP SIGNATURE-----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=eMOr
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
Merge power capping code updates, x86-specific power management pdate,
operating performance points library updates and miscellaneous power
management updates for 6.2-rc1:
- Fix compiler warnings with make W=1 in the idle_inject power capping
driver (Srinivas Pandruvada).
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET).
- Add SCMI Powercap based power capping driver (Cristian Marussi).
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy).
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn).
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns property in DT example (Serge Semin).
* powercap:
powercap: idle_inject: Fix warnings with make W=1
powercap: Use kstrtobool() instead of strtobool()
powercap: arm_scmi: Add SCMI Powercap based driver
* pm-x86:
platform/x86: intel-uncore-freq: add Emerald Rapids support
* pm-opp:
dt-bindings: opp-v2: Fix clock-latency-ns prop in example
OPP: decouple dt properties in opp_parse_supplies()
OPP: Simplify opp_parse_supplies() by restructuring it
OPP: Parse named opp-microwatt property too
dt-bindings: opp: Fix named microwatt property
dt-bindings: opp: Fix usage of current in microwatt property
* pm-misc:
notifier: repair slips in kernel-doc comments
print_trace_line may overflow seq_file buffer. If the event is not
consumed, the while loop keeps peeking this event, causing a infinite loop.
Link: https://lkml.kernel.org/r/20221129113009.182425-1-yangjihong1@huawei.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 088b1e427d ("ftrace: pipe fixes")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge cpuidle changes, updates related to system sleep amd generic power
domains code fixes for 6.2-rc1:
- Improve kernel messages printed by the cpuidle PCI driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
* pm-cpuidle:
cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver()
cpuidle: dt: Return the correct numbers of parsed idle states
cpuidle: psci: Extend information in log about OSI/PC mode
* pm-sleep:
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: hibernate: Complain about memory map mismatches during resume
PM: hibernate: Fix mistake in kerneldoc comment
* pm-domains:
PM: domains: Reverse the order of performance and enabling ops
PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq()
PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend()
PM: domains: Drop genpd status manipulation for hibernate restore
The 'padding' field of the 'rchan_buf' structure is an array of 'size_t'
elements, but the memory is allocated for an array of 'size_t *' elements.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20221129092002.3538384-1-Ilia.Gavrilov@infotecs.ru
Fixes: b86ff981a8 ("[PATCH] relay: migrate from relayfs to a generic relay API")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Building kcsan_test with structleak plugin enabled makes the stack frame
size to grow.
kernel/kcsan/kcsan_test.c:704:1: error: the frame size of 3296 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Turn off the structleak plugin checks for kcsan_test.
Link: https://lkml.kernel.org/r/20221128104358.2660634-1-anders.roxell@linaro.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Gow <davidgow@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The implementation of strscpy() is more robust and safer. That's now the
recommended way to copy NUL terminated strings.
Link: https://lkml.kernel.org/r/202211220853259244666@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lockdep and KMSAN used to play badly together, causing deadlocks when
KMSAN instrumentation of lockdep.c called lockdep functions recursively.
Looks like this is no more the case, and a kernel can run (yet slower)
with both KMSAN and lockdep enabled. This patch should fix false
positives on wq_head->lock->dep_map, which KMSAN used to consider
uninitialized because of lockdep.c not being instrumented.
Link: https://lore.kernel.org/lkml/Y3b9AAEKp2Vr3e6O@sol.localdomain/
Link: https://lkml.kernel.org/r/20221128094541.2645890-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
An update for verifier.c:states_equal()/regsafe() to use check_ids()
for active spin lock comparisons. This fixes the issue reported by
Kumar Kartikeya Dwivedi in [1] using technique suggested by Edward Cree.
W/o this commit the verifier might be tricked to accept the following
program working with a map containing spin locks:
0: r9 = map_lookup_elem(...) ; Returns PTR_TO_MAP_VALUE_OR_NULL id=1.
1: r8 = map_lookup_elem(...) ; Returns PTR_TO_MAP_VALUE_OR_NULL id=2.
2: if r9 == 0 goto exit ; r9 -> PTR_TO_MAP_VALUE.
3: if r8 == 0 goto exit ; r8 -> PTR_TO_MAP_VALUE.
4: r7 = ktime_get_ns() ; Unbound SCALAR_VALUE.
5: r6 = ktime_get_ns() ; Unbound SCALAR_VALUE.
6: bpf_spin_lock(r8) ; active_lock.id == 2.
7: if r6 > r7 goto +1 ; No new information about the state
; is derived from this check, thus
; produced verifier states differ only
; in 'insn_idx'.
8: r9 = r8 ; Optionally make r9.id == r8.id.
--- checkpoint --- ; Assume is_state_visisted() creates a
; checkpoint here.
9: bpf_spin_unlock(r9) ; (a,b) active_lock.id == 2.
; (a) r9.id == 2, (b) r9.id == 1.
10: exit(0)
Consider two verification paths:
(a) 0-10
(b) 0-7,9-10
The path (a) is verified first. If checkpoint is created at (8)
the (b) would assume that (8) is safe because regsafe() does not
compare register ids for registers of type PTR_TO_MAP_VALUE.
[1] https://lore.kernel.org/bpf/20221111202719.982118-1-memxor@gmail.com/
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Suggested-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
verifier.c:states_equal() must maintain register ID mapping across all
function frames. Otherwise the following example might be erroneously
marked as safe:
main:
fp[-24] = map_lookup_elem(...) ; frame[0].fp[-24].id == 1
fp[-32] = map_lookup_elem(...) ; frame[0].fp[-32].id == 2
r1 = &fp[-24]
r2 = &fp[-32]
call foo()
r0 = 0
exit
foo:
0: r9 = r1
1: r8 = r2
2: r7 = ktime_get_ns()
3: r6 = ktime_get_ns()
4: if (r6 > r7) goto skip_assign
5: r9 = r8
skip_assign: ; <--- checkpoint
6: r9 = *r9 ; (a) frame[1].r9.id == 2
; (b) frame[1].r9.id == 1
7: if r9 == 0 goto exit: ; mark_ptr_or_null_regs() transfers != 0 info
; for all regs sharing ID:
; (a) r9 != 0 => &frame[0].fp[-32] != 0
; (b) r9 != 0 => &frame[0].fp[-24] != 0
8: r8 = *r8 ; (a) r8 == &frame[0].fp[-32]
; (b) r8 == &frame[0].fp[-32]
9: r0 = *r8 ; (a) safe
; (b) unsafe
exit:
10: exit
While processing call to foo() verifier considers the following
execution paths:
(a) 0-10
(b) 0-4,6-10
(There is also path 0-7,10 but it is not interesting for the issue at
hand. (a) is verified first.)
Suppose that checkpoint is created at (6) when path (a) is verified,
next path (b) is verified and (6) is reached.
If states_equal() maintains separate 'idmap' for each frame the
mapping at (6) for frame[1] would be empty and
regsafe(r9)::check_ids() would add a pair 2->1 and return true,
which is an error.
If states_equal() maintains single 'idmap' for all frames the mapping
at (6) would be { 1->1, 2->2 } and regsafe(r9)::check_ids() would
return false when trying to add a pair 2->1.
This issue was suggested in the following discussion:
https://lore.kernel.org/bpf/CAEf4BzbFB5g4oUfyxk9rHy-PJSLQ3h8q9mV=rVoXfr_JVm8+1Q@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier.c:regsafe() has the following shortcut:
equal = memcmp(rold, rcur, offsetof(struct bpf_reg_state, parent)) == 0;
...
if (equal)
return true;
Which is executed regardless old register type. This is incorrect for
register types that might have an ID checked by check_ids(), namely:
- PTR_TO_MAP_KEY
- PTR_TO_MAP_VALUE
- PTR_TO_PACKET_META
- PTR_TO_PACKET
The following pattern could be used to exploit this:
0: r9 = map_lookup_elem(...) ; Returns PTR_TO_MAP_VALUE_OR_NULL id=1.
1: r8 = map_lookup_elem(...) ; Returns PTR_TO_MAP_VALUE_OR_NULL id=2.
2: r7 = ktime_get_ns() ; Unbound SCALAR_VALUE.
3: r6 = ktime_get_ns() ; Unbound SCALAR_VALUE.
4: if r6 > r7 goto +1 ; No new information about the state
; is derived from this check, thus
; produced verifier states differ only
; in 'insn_idx'.
5: r9 = r8 ; Optionally make r9.id == r8.id.
--- checkpoint --- ; Assume is_state_visisted() creates a
; checkpoint here.
6: if r9 == 0 goto <exit> ; Nullness info is propagated to all
; registers with matching ID.
7: r1 = *(u64 *) r8 ; Not always safe.
Verifier first visits path 1-7 where r8 is verified to be not null
at (6). Later the jump from 4 to 6 is examined. The checkpoint for (6)
looks as follows:
R8_rD=map_value_or_null(id=2,off=0,ks=4,vs=8,imm=0)
R9_rwD=map_value_or_null(id=2,off=0,ks=4,vs=8,imm=0)
R10=fp0
The current state is:
R0=... R6=... R7=... fp-8=...
R8=map_value_or_null(id=2,off=0,ks=4,vs=8,imm=0)
R9=map_value_or_null(id=1,off=0,ks=4,vs=8,imm=0)
R10=fp0
Note that R8 states are byte-to-byte identical, so regsafe() would
exit early and skip call to check_ids(), thus ID mapping 2->2 will not
be added to 'idmap'. Next, states for R9 are compared: these are not
identical and check_ids() is executed, but 'idmap' is empty, so
check_ids() adds mapping 2->1 to 'idmap' and returns success.
This commit pushes the 'equal' down to register types that don't need
check_ids().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The osnoise workload runs with preemption and IRQs enabled in such
a way as to allow all sorts of noise to disturb osnoise's execution.
hwlat tracer has a similar workload but works with irq disabled,
allowing only NMIs and the hardware to generate noise.
While thinking about adding an options file to hwlat tracer to
allow the system to panic, and other features I was thinking
to add, like having a tracepoint at each noise detection, it
came to my mind that is easier to make osnoise and also do
hardware latency detection than making hwlat "feature compatible"
with osnoise.
Other points are:
- osnoise already has an independent cpu file.
- osnoise has a more intuitive interface, e.g., runtime/period vs.
window/width (and people often need help remembering what it is).
- osnoise: tracepoints
- osnoise stop options
- osnoise options file itself
Moreover, the user-space side (in rtla) is simplified by reusing the
existing osnoise code.
Finally, people have been asking me about using osnoise for hw latency
detection, and I have to explain that it was sufficient but not
necessary. These options make it sufficient and necessary.
Adding a Suggested-by Clark, as he often asked me about this
possibility.
Link: https://lkml.kernel.org/r/d9c6c19135497054986900f94c8e47410b15316a.1670623111.git.bristot@kernel.org
Cc: Suggested-by: Clark Williams <williams@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Often the latency observed in a CPU is not caused by the work being done
in the CPU itself, but by work done on another CPU that causes the
hardware to stall all CPUs. In this case, it is interesting to know
what is happening on ALL CPUs, and the best way to do this is via
crash dump analysis.
Add the PANIC_ON_STOP option to osnoise/timerlat tracers. The default
behavior is having this option off. When enabled by the user, the system
will panic after hitting a stop tracing condition.
This option was motivated by a real scenario that Juri Lelli and I
were debugging.
Link: https://lkml.kernel.org/r/249ce4287c6725543e6db845a6e0df621dc67db5.1670623111.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make osnoise_options static, as reported by the kernel test robot.
Link: https://lkml.kernel.org/r/63255826485400d7a2270e9c5e66111079671e7a.1670228712.git.bristot@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_trigger command line option introduced by
commit a01fdc897f ("tracing: Add trace_trigger kernel command line option")
doesn't need to depend on the CONFIG_HIST_TRIGGERS kernel config option.
This code doesn't depend on the histogram code, and the run-time
selection of triggers is usable without CONFIG_HIST_TRIGGERS.
Link: https://lore.kernel.org/linux-trace-kernel/20221209003310.1737039-1-zwisler@google.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: a01fdc897f ("tracing: Add trace_trigger kernel command line option")
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With the new command line option that allows trace event triggers to be
added at boot, the "snapshot" trigger will allocate the snapshot buffer
very early, when interrupts can not be enabled. Allocating the ring buffer
is not the problem, but it also resizes it, which is, as the resize code
does synchronization that can not be preformed at early boot.
To handle this, first change the raw_spin_lock_irq() in rb_insert_pages()
to raw_spin_lock_irqsave(), such that the unlocking of that spin lock will
not enable interrupts.
Next, where it calls schedule_work_on(), disable migration and check if
the CPU to update is the current CPU, and if so, perform the work
directly, otherwise re-enable migration and call the schedule_work_on() to
the CPU that is being updated. The rb_insert_pages() just needs to be run
on the CPU that it is updating, and does not need preemption nor
interrupts disabled when calling it.
Link: https://lore.kernel.org/lkml/Y5J%2FCajlNh1gexvo@google.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221209101151.1fec1167@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: a01fdc897f ("tracing: Add trace_trigger kernel command line option")
Reported-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When input some constructed invalid 'trigger' command, command info
in 'error_log' are lost [1].
The root cause is that there is a path that event_hist_trigger_parse()
is recursely called once and 'last_cmd' which save origin command is
cleared, then later calling of hist_err() will no longer record origin
command info:
event_hist_trigger_parse() {
last_cmd_set() // <1> 'last_cmd' save origin command here at first
create_actions() {
onmatch_create() {
action_create() {
trace_action_create() {
trace_action_create_field_var() {
create_field_var_hist() {
event_hist_trigger_parse() { // <2> recursely called once
hist_err_clear() // <3> 'last_cmd' is cleared here
}
hist_err() // <4> No longer find origin command!!!
Since 'glob' is empty string while running into the recurse call, we
can trickly check it and bypass the call of hist_err_clear() to solve it.
[1]
# cd /sys/kernel/tracing
# echo "my_synth_event int v1; int v2; int v3;" >> synthetic_events
# echo 'hist:keys=pid' >> events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid1)" >> events/sched/sched_switch/trigger
# cat error_log
[ 8.405018] hist:sched:sched_switch: error: Couldn't find synthetic event
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't find field
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't parse field variable
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't parse field variable
Command:
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't create histogram for field
Command:
^
Link: https://lore.kernel.org/linux-trace-kernel/20221207135326.3483216-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Fixes: f404da6e1d ("tracing: Add 'last error' error facility for hist triggers")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The maximum number of synthetic fields supported is defined as
SYNTH_FIELDS_MAX which value currently is 64, but it actually fails
when try to generate a synthetic event with 64 fields by executing like:
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63; int v64" >> /sys/kernel/tracing/synthetic_events
Correct the field counting to fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20221207091557.3137904-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c9e759b1e8 ("tracing: Rework synthetic event command parsing")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].
It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.
To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.
[1]
# cd /sys/kernel/tracing/
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger
[2]
BUG: unable to handle page fault for address: ffff91c900000000
PGD 61001067 P4D 61001067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Call Trace:
<TASK>
__find_event_file+0x55/0x90
action_create+0x76c/0x1060
event_hist_trigger_parse+0x146d/0x2060
? event_trigger_write+0x31/0xd0
trigger_process_regex+0xbb/0x110
event_trigger_write+0x6b/0xd0
vfs_write+0xc8/0x3e0
? alloc_fd+0xc0/0x160
? preempt_count_add+0x4d/0xa0
? preempt_count_add+0x70/0xa0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f1d1d0cf077
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74
RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077
RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001
RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142
R10: 000056392639c017 R11: 0000000000000246 R12: 0000000000000143
R13: 00007f1d1d1ae6a0 R14: 00007f1d1d1aa4a0 R15: 00007f1d1d1a98a0
</TASK>
Modules linked in:
CR2: ffff91c900000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Link: https://lore.kernel.org/linux-trace-kernel/20221207035143.2278781-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: d380dcde9a ("tracing: Fix now invalid var_ref_vals assumption in trace action")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Both CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER partially enables the
CONFIG_TRACER_MAX_TRACE code, but that is complicated and has
introduced a bug; It declares tracing_max_lat_fops data structure outside
of #ifdefs, but since it is defined only when CONFIG_TRACER_MAX_TRACE=y
or CONFIG_HWLAT_TRACER=y, if only CONFIG_OSNOISE_TRACER=y, that
declaration comes to a definition(!).
To fix this issue, and do not repeat the similar problem, makes
CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER enables the
CONFIG_TRACER_MAX_TRACE always. It has there benefits;
- Fix the tracing_max_lat_fops bug
- Simplify the #ifdefs
- CONFIG_TRACER_MAX_TRACE code is fully enabled, or not.
Link: https://lore.kernel.org/linux-trace-kernel/167033628155.4111793.12185405690820208159.stgit@devnote3
Fixes: 424b650f35 ("tracing: Fix missing osnoise tracer on max_latency")
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: stable@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/all/166992525941.1716618.13740663757583361463.stgit@warthog.procyon.org.uk/ (original thread and v1)
Link: https://lore.kernel.org/all/202212052253.VuhZ2ulJ-lkp@intel.com/T/#u (v1 error report)
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When creating probe names, a check is done to make sure it matches basic C
standard variable naming standards. Basically, starts with alphabetic or
underline, and then the rest of the characters have alpha-numeric or
underline in them.
But system names do not have any true naming conventions, as they are
created by the TRACE_SYSTEM macro and nothing tests to see what they are.
The "xhci-hcd" trace events has a '-' in the system name. When trying to
attach a eprobe to one of these trace points, it fails because the system
name does not follow the variable naming convention because of the
hyphen, and the eprobe checks fail on this.
Allow hyphens in the system name so that eprobes can attach to the
"xhci-hcd" trace events.
Link: https://lore.kernel.org/all/Y3eJ8GiGnEvVd8%2FN@macondo/
Link: https://lore.kernel.org/linux-trace-kernel/20221122122345.160f5077@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 5b7a962209 ("tracing/probe: Check event/group naming rule at parsing")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function __kprobe_trace_func calls ring_buffer_event_data to
get a ring buffer, however, it has been done in above call
trace_event_buffer_reserve. So does __kretprobe_trace_func.
This patch removes those duplicated calls.
Link: https://lore.kernel.org/all/1666145478-4706-1-git-send-email-chensong_2000@189.cn/
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Song Chen <chensong_2000@189.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The hitcount is treated specially in the histograms - since it's
always expected to be there regardless of whether the user specified
anything or not, it's always added as the first histogram value.
Currently the code doesn't allow it to be added more than once as a
value, which is inconsistent with all the other possible values. It
would seem to be a pointless thing to want to do, but other features
being added such as percent and graph modifiers don't work properly
with the current hitcount restrictions.
Fix this by allowing multiple hitcounts to be added.
Link: https://lore.kernel.org/linux-trace-kernel/166610812248.56030.16754785928712505251.stgit@devnote2
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through. With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection. Instead, let's check the superblock
and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It may happen that destination buffer memory overlaps with memory dynptr
points to. Hence, we must use memmove to correctly copy from dynptr to
destination buffer, or source buffer to dynptr.
This actually isn't a problem right now, as memcpy implementation falls
back to memmove on detecting overlap and warns about it, but we
shouldn't be relying on that.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After previous commit, we are minimizing helper specific assumptions
from check_func_arg_reg_off, making it generic, and offloading checks
for a specific argument type to their respective functions called after
check_func_arg_reg_off has been called.
This allows relying on a consistent set of guarantees after that call
and then relying on them in code that deals with registers for each
argument type later. This is in line with how process_spin_lock,
process_timer_func, process_kptr_func check reg->var_off to be constant.
The same reasoning is used here to move the alignment check into
process_dynptr_func. Note that it also needs to check for constant
var_off, and accumulate the constant var_off when computing the spi in
get_spi, but that fix will come in later changes.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While check_func_arg_reg_off is the place which performs generic checks
needed by various candidates of reg->type, there is some handling for
special cases, like ARG_PTR_TO_DYNPTR, OBJ_RELEASE, and
ARG_PTR_TO_RINGBUF_MEM.
This commit aims to streamline these special cases and instead leave
other things up to argument type specific code to handle. The function
will be restrictive by default, and cover all possible cases when
OBJ_RELEASE is set, without having to update the function again (and
missing to do that being a bug).
This is done primarily for two reasons: associating back reg->type to
its argument leaves room for the list getting out of sync when a new
reg->type is supported by an arg_type.
The other case is ARG_PTR_TO_RINGBUF_MEM. The problem there is something
we already handle, whenever a release argument is expected, it should
be passed as the pointer that was received from the acquire function.
Hence zero fixed and variable offset.
There is nothing special about ARG_PTR_TO_RINGBUF_MEM, where technically
its target register type PTR_TO_MEM | MEM_RINGBUF can already be passed
with non-zero offset to other helper functions, which makes sense.
Hence, lift the arg_type_is_release check for reg->off and cover all
possible register types, instead of duplicating the same kind of check
twice for current OBJ_RELEASE arg_types (alloc_mem and ptr_to_btf_id).
For the release argument, arg_type_is_dynptr is the special case, where
we go to actual object being freed through the dynptr, so the offset of
the pointer still needs to allow fixed and variable offset and
process_dynptr_func will verify them later for the release argument case
as well.
This is not specific to ARG_PTR_TO_DYNPTR though, we will need to make
this exception for any future object on the stack that needs to be
released. In this sense, PTR_TO_STACK as a candidate for object on stack
argument is a special case for release offset checks, and they need to
be done by the helper releasing the object on stack.
Since the check has been lifted above all register type checks, remove
the duplicated check that is being done for PTR_TO_BTF_ID.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, user ringbuf support introduced a PTR_TO_DYNPTR register type
for use in callback state, because in case of user ringbuf helpers,
there is no dynptr on the stack that is passed into the callback. To
reflect such a state, a special register type was created.
However, some checks have been bypassed incorrectly during the addition
of this feature. First, for arg_type with MEM_UNINIT flag which
initialize a dynptr, they must be rejected for such register type.
Secondly, in the future, there are plans to add dynptr helpers that
operate on the dynptr itself and may change its offset and other
properties.
In all of these cases, PTR_TO_DYNPTR shouldn't be allowed to be passed
to such helpers, however the current code simply returns 0.
The rejection for helpers that release the dynptr is already handled.
For fixing this, we take a step back and rework existing code in a way
that will allow fitting in all classes of helpers and have a coherent
model for dealing with the variety of use cases in which dynptr is used.
First, for ARG_PTR_TO_DYNPTR, it can either be set alone or together
with a DYNPTR_TYPE_* constant that denotes the only type it accepts.
Next, helpers which initialize a dynptr use MEM_UNINIT to indicate this
fact. To make the distinction clear, use MEM_RDONLY flag to indicate
that the helper only operates on the memory pointed to by the dynptr,
not the dynptr itself. In C parlance, it would be equivalent to taking
the dynptr as a point to const argument.
When either of these flags are not present, the helper is allowed to
mutate both the dynptr itself and also the memory it points to.
Currently, the read only status of the memory is not tracked in the
dynptr, but it would be trivial to add this support inside dynptr state
of the register.
With these changes and renaming PTR_TO_DYNPTR to CONST_PTR_TO_DYNPTR to
better reflect its usage, it can no longer be passed to helpers that
initialize a dynptr, i.e. bpf_dynptr_from_mem, bpf_ringbuf_reserve_dynptr.
A note to reviewers is that in code that does mark_stack_slots_dynptr,
and unmark_stack_slots_dynptr, we implicitly rely on the fact that
PTR_TO_STACK reg is the only case that can reach that code path, as one
cannot pass CONST_PTR_TO_DYNPTR to helpers that don't set MEM_RDONLY. In
both cases such helpers won't be setting that flag.
The next patch will add a couple of selftest cases to make sure this
doesn't break.
Fixes: 2057156738 ("bpf: Add bpf_user_ringbuf_drain() helper")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARG_PTR_TO_DYNPTR is akin to ARG_PTR_TO_TIMER, ARG_PTR_TO_KPTR, where
the underlying register type is subjected to more special checks to
determine the type of object represented by the pointer and its state
consistency.
Move dynptr checks to their own 'process_dynptr_func' function so that
is consistent and in-line with existing code. This also makes it easier
to reuse this code for kfunc handling.
Then, reuse this consolidated function in kfunc dynptr handling too.
Note that for kfuncs, the arg_type constraint of DYNPTR_TYPE_LOCAL has
been lifted.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If there are pending rcu callback, free_mem_alloc() will use
rcu_barrier_tasks_trace() and rcu_barrier() to wait for the pending
__free_rcu_tasks_trace() and __free_rcu() callback.
If rcu_trace_implies_rcu_gp() is true, there will be no pending
__free_rcu(), so it will be OK to skip rcu_barrier() as well.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221209010947.3130477-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When there are batched freeing operations on a specific CPU, part of
the freed elements ((high_watermark - lower_watermark) / 2 + 1) will be
indirectly moved into waiting_for_gp list through free_by_rcu list.
After call_rcu_in_progress becomes false again, the remaining elements
in free_by_rcu list will be moved to waiting_for_gp list by the next
invocation of free_bulk(). However if the expiration of RCU tasks trace
grace period is relatively slow, none element in free_by_rcu list will
be moved.
So instead of invoking __alloc_percpu_gfp() or kmalloc_node() to
allocate a new object, in alloc_bulk() just check whether or not there is
freed element in free_by_rcu list and reuse it if available.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221209010947.3130477-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently
dropped the file type check with it allowing any file to slip through.
With the invarients broken, the d_name and parent accesses can now race
against renames and removals of arbitrary files and cause
use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now
that cgroupfs is implemented through kernfs, checking the file
operations needs to go through a layer of indirection. Instead, let's
check the superblock and dentry type.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Cc: stable@kernel.org # v3.14+
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
insn->imm for kfunc is the relative address of __bpf_call_base,
instead of __bpf_base_call, Fix the comment error.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20221208013724.257848-1-yangjihong1@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In BPF all global functions, and BPF helpers return a 64-bit
value. For kfunc calls, this is not the case, and they can return
e.g. 32-bit values.
The return register R0 for kfuncs calls can therefore be marked as
subreg_def != DEF_NOT_SUBREG. In general, if a register is marked with
subreg_def != DEF_NOT_SUBREG, some archs (where bpf_jit_needs_zext()
returns true) require the verifier to insert explicit zero-extension
instructions.
For kfuncs calls, however, the caller should do sign/zero extension
for return values. In other words, the compiler is responsible to
insert proper instructions, not the verifier.
An example, provided by Yonghong Song:
$ cat t.c
extern unsigned foo(void);
unsigned bar1(void) {
return foo();
}
unsigned bar2(void) {
if (foo()) return 10; else return 20;
}
$ clang -target bpf -mcpu=v3 -O2 -c t.c && llvm-objdump -d t.o
t.o: file format elf64-bpf
Disassembly of section .text:
0000000000000000 <bar1>:
0: 85 10 00 00 ff ff ff ff call -0x1
1: 95 00 00 00 00 00 00 00 exit
0000000000000010 <bar2>:
2: 85 10 00 00 ff ff ff ff call -0x1
3: bc 01 00 00 00 00 00 00 w1 = w0
4: b4 00 00 00 14 00 00 00 w0 = 0x14
5: 16 01 01 00 00 00 00 00 if w1 == 0x0 goto +0x1 <LBB1_2>
6: b4 00 00 00 0a 00 00 00 w0 = 0xa
0000000000000038 <LBB1_2>:
7: 95 00 00 00 00 00 00 00 exit
If the return value of 'foo()' is used in the BPF program, the proper
zero-extension will be done.
Currently, the verifier correctly marks, say, a 32-bit return value as
subreg_def != DEF_NOT_SUBREG, but will fail performing the actual
zero-extension, due to a verifier bug in
opt_subreg_zext_lo32_rnd_hi32(). load_reg is not properly set to R0,
and the following path will be taken:
if (WARN_ON(load_reg == -1)) {
verbose(env, "verifier bug. zext_dst is set, but no reg is defined\n");
return -EFAULT;
}
A longer discussion from v1 can be found in the link below.
Correct the verifier by avoiding doing explicit zero-extension of R0
for kfunc calls. Note that R0 will still be marked as a sub-register
for return values smaller than 64-bit.
Fixes: 83a2881903 ("bpf: Account for BPF_FETCH in insn_has_def32()")
Link: https://lore.kernel.org/bpf/20221202103620.1915679-1-bjorn@kernel.org/
Suggested-by: Yonghong Song <yhs@meta.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221207103540.396496-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the blk_classic option is enabled, non-blktrace events must be
filtered out. Otherwise, events of other types are output in the blktrace
classic format, which is unexpected.
The problem can be triggered in the following ways:
# echo 1 > /sys/kernel/debug/tracing/options/blk_classic
# echo 1 > /sys/kernel/debug/tracing/events/enable
# echo blk > /sys/kernel/debug/tracing/current_tracer
# cat /sys/kernel/debug/tracing/trace_pipe
Fixes: c71a896154 ("blktrace: add ftrace plugin")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20221122040410.85113-1-yangjihong1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bpf_cgroup_acquire(), bpf_cgroup_release(), bpf_cgroup_kptr_get(), and
bpf_cgroup_ancestor(), are kfuncs that were recently added to
kernel/bpf/helpers.c. These are "core" kfuncs in that they're available
for use in any tracepoint or struct_ops BPF program. Though they have no
ABI stability guarantees, we should still document them. This patch adds
a struct cgroup * subsection to the Core kfuncs section which describes
each of these kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221207204911.873646-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_task_acquire(), bpf_task_release(), and bpf_task_from_pid() are
kfuncs that were recently added to kernel/bpf/helpers.c. These are
"core" kfuncs in that they're available for use for any tracepoint or
struct_ops BPF program. Though they have no ABI stability guarantees, we
should still document them. This patch adds a new Core kfuncs section to
the BPF kfuncs doc, and adds entries for all of these task kfuncs.
Note that bpf_task_kptr_get() is not documented, as it still returns
NULL while we're working to resolve how it can use RCU to ensure struct
task_struct * lifetime.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221207204911.873646-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Number of total instructions in BPF program (including subprogs) can and
is accessed from env->prog->len. visit_func_call_insn() doesn't do any
checks against insn_cnt anymore, relying on push_insn() to do this check
internally. So remove unnecessary insn_cnt input argument from
visit_func_call_insn() and visit_insn() functions.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221207195534.2866030-1-andrii@kernel.org
-----BEGIN PGP SIGNATURE-----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=FX5W
-----END PGP SIGNATURE-----
Merge "do not rely on ALLOW_ERROR_INJECTION for fmod_ret" into bpf-next
Merge commit 5b481acab4 ("bpf: do not rely on ALLOW_ERROR_INJECTION for fmod_ret")
from hid tree into bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for zstd compressed modules to the in-kernel decompression
code. This allows zstd compressed modules to be decompressed by the
kernel, similar to the existing support for gzip and xz compressed
modules.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Piotr Gorski <lucjan.lucjanov@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The current way of expressing that a non-bpf kernel component is willing
to accept that bpf programs can be attached to it and that they can change
the return value is to abuse ALLOW_ERROR_INJECTION.
This is debated in the link below, and the result is that it is not a
reasonable thing to do.
Reuse the kfunc declaration structure to also tag the kernel functions
we want to be fmodret. This way we can control from any subsystem which
functions are being modified by bpf without touching the verifier.
Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20221206145936.922196-2-benjamin.tissoires@redhat.com
Don't mark some instructions as jump points when there are actually no
jumps and instructions are just processed sequentially. Such case is
handled naturally by precision backtracking logic without the need to
update jump history. See get_prev_insn_idx(). It goes back linearly by
one instruction, unless current top of jmp_history is pointing to
current instruction. In such case we use `st->jmp_history[cnt - 1].prev_idx`
to find instruction from which we jumped to the current instruction
non-linearly.
Also remove both jump and prune point marking for instruction right
after unconditional jumps, as program flow can get to the instruction
right after unconditional jump instruction only if there is a jump to
that instruction from somewhere else in the program. In such case we'll
mark such instruction as prune/jump point because it's a destination of
a jump.
This change has no changes in terms of number of instructions or states
processes across Cilium and selftests programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20221206233345.438540-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jump history updating and state equivalence checks are conceptually
independent, so move push_jmp_history() out of is_state_visited(). Also
make a decision whether to perform state equivalence checks or not one
layer higher in do_check(), keeping is_state_visited() unconditionally
performing state checks.
push_jmp_history() should be performed after state checks. There is just
one small non-uniformity. When is_state_visited() finds already
validated equivalent state, it propagates precision marks to current
state's parent chain. For this to work correctly, jump history has to be
updated, so is_state_visited() is doing that internally.
But if no equivalent verified state is found, jump history has to be
updated in a newly cloned child state, so is_jmp_point()
+ push_jmp_history() is performed after is_state_visited() exited with
zero result, which means "proceed with validation".
This change has no functional changes. It's not strictly necessary, but
feels right to decouple these two processes.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221206233345.438540-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF verifier marks some instructions as prune points. Currently these
prune points serve two purposes.
It's a point where verifier tries to find previously verified state and
check current state's equivalence to short circuit verification for
current code path.
But also currently it's a point where jump history, used for precision
backtracking, is updated. This is done so that non-linear flow of
execution could be properly backtracked.
Such coupling is coincidental and unnecessary. Some prune points are not
part of some non-linear jump path, so don't need update of jump history.
On the other hand, not all instructions which have to be recorded in
jump history necessarily are good prune points.
This patch splits prune and jump points into independent flags.
Currently all prune points are marked as jump points to minimize amount
of changes in this patch, but next patch will perform some optimization
of prune vs jmp point placement.
No functional changes are intended.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221206233345.438540-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf->struct_meta_tab is populated by btf_parse_struct_metas in btf.c.
There, a BTF record is created for any type containing a spin_lock or
any next-gen datastructure node/head.
Currently, for non-MAP_VALUE types, reg_btf_record will only search for
a record using struct_meta_tab if the reg->type exactly matches
(PTR_TO_BTF_ID | MEM_ALLOC). This exact match is too strict: an
"allocated obj" type - returned from bpf_obj_new - might pick up other
flags while working its way through the program.
Loosen the check to be exact for base_type and just use MEM_ALLOC mask
for type_flag.
This patch is marked Fixes as the original intent of reg_btf_record was
unlikely to have been to fail finding btf_record for valid alloc obj
types with additional flags, some of which (e.g. PTR_UNTRUSTED)
are valid register type states for alloc obj independent of this series.
However, I didn't find a specific broken repro case outside of this
series' added functionality, so it's possible that nothing was
triggering this logic error before.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 4e814da0d5 ("bpf: Allow locking bpf_spin_lock in allocated objects")
Link: https://lore.kernel.org/r/20221206231000.3180914-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A series of prior patches added some kfuncs that allow struct
task_struct * objects to be used as kptrs. These kfuncs leveraged the
'refcount_t rcu_users' field of the task for performing refcounting.
This field was used instead of 'refcount_t usage', as we wanted to
leverage the safety provided by RCU for ensuring a task's lifetime.
A struct task_struct is refcounted by two different refcount_t fields:
1. p->usage: The "true" refcount field which task lifetime. The
task is freed as soon as this refcount drops to 0.
2. p->rcu_users: An "RCU users" refcount field which is statically
initialized to 2, and is co-located in a union with
a struct rcu_head field (p->rcu). p->rcu_users
essentially encapsulates a single p->usage
refcount, and when p->rcu_users goes to 0, an RCU
callback is scheduled on the struct rcu_head which
decrements the p->usage refcount.
Our logic was that by using p->rcu_users, we would be able to use RCU to
safely issue refcount_inc_not_zero() a task's rcu_users field to
determine if a task could still be acquired, or was exiting.
Unfortunately, this does not work due to p->rcu_users and p->rcu sharing
a union. When p->rcu_users goes to 0, an RCU callback is scheduled to
drop a single p->usage refcount, and because the fields share a union,
the refcount immediately becomes nonzero again after the callback is
scheduled.
If we were to split the fields out of the union, this wouldn't be a
problem. Doing so should also be rather non-controversial, as there are
a number of places in struct task_struct that have padding which we
could use to avoid growing the structure by splitting up the fields.
For now, so as to fix the kfuncs to be correct, this patch instead
updates bpf_task_acquire() and bpf_task_release() to use the p->usage
field for refcounting via the get_task_struct() and put_task_struct()
functions. Because we can no longer rely on RCU, the change also guts
the bpf_task_acquire_not_zero() and bpf_task_kptr_get() functions
pending a resolution on the above problem.
In addition, the task fixes the kfunc and rcu_read_lock selftests to
expect this new behavior.
Fixes: 90660309b0 ("bpf: Add kfuncs for storing struct task_struct * as a kptr")
Fixes: fca1aa7551 ("bpf: Handle MEM_RCU type properly")
Reported-by: Matus Jokay <matus.jokay@stuba.sk>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221206210538.597606-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A previous change amended try_to_freeze_tasks() with the "what"
variable pointing to a string describing the group of tasks subject to
the freezing which may be used in the error message in there too, so
make that happen.
Accordingly, update sleepgraph.py to catch the modified error message
as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Using pr_cont() in the tasks freezing code related to system-wide
suspend and hibernation is problematic, because the continuation
messages printed there are susceptible to interspersing with other
unrelated messages which results in output that is hard to
understand.
Address this issue by modifying try_to_freeze_tasks() to print
messages that don't require continuations and adjusting its
callers accordingly.
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
For supporting post MSI-X enable allocations and for the upcoming PCI/IMS
support a separate interface is required which allows not only the
allocation of a specific index, but also the allocation of any, i.e. the
next free index. The latter is especially required for IMS because IMS
completely does away with index to functionality mappings which are
often found in MSI/MSI-X implementation.
But even with MSI-X there are devices where only the first few indices have
a fixed functionality and the rest is freely assignable by software,
e.g. to queues.
msi_domain_alloc_irq_at() is also different from the range based interfaces
as it always enforces that the MSI descriptor is allocated by the core code
and not preallocated by the caller like the PCI/MSI[-X] enable code path
does.
msi_domain_alloc_irq_at() can be invoked with the index argument set to
MSI_ANY_INDEX which makes the core code pick the next free index. The irq
domain can provide a prepare_desc() operation callback in it's
msi_domain_ops to do domain specific post allocation initialization before
the actual Linux interrupt and the associated interrupt descriptor and
hierarchy alloccations are conducted.
The function also takes an optional @icookie argument which is of type
union msi_instance_cookie. This cookie is not used by the core code and is
stored in the allocated msi_desc::data::icookie. The meaning of the cookie
is completely implementation defined. In case of IMS this might be a PASID
or a pointer to a device queue, but for the MSI core it's opaque and not
used in any way.
The function returns a struct msi_map which on success contains the
allocated index number and the Linux interrupt number so the caller can
spare the index to Linux interrupt number lookup.
On failure map::index contains the error code and map::virq is 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.501359457@linutronix.de
The existing MSI domain ops msi_prepare() and set_desc() turned out to be
unsuitable for implementing IMS support.
msi_prepare() does not operate on the MSI descriptors. set_desc() lacks
an irq_domain pointer and has a completely different purpose.
Introduce a prepare_desc() op which allows IMS implementations to amend an
MSI descriptor which was allocated by the core code, e.g. by adjusting the
iomem base or adding some data based on the allocated index. This is way
better than requiring that all IMS domain implementations preallocate the
MSI descriptor and then allocate the interrupt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.444560717@linutronix.de
Provide new bus tokens for the upcoming per device PCI/MSI and PCI/MSIX
interrupt domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.917219885@linutronix.de
Per device domains provide the real domain size to the core code. This
allows range checking on insertion of MSI descriptors and also paves the
way for dynamic index allocations which are required e.g. for IMS. This
avoids external mechanisms like bitmaps on the device side and just
utilizes the core internal MSI descriptor storxe for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.798556374@linutronix.de
proc_skip_spaces() seems to think it is working on C strings, and ends
up being just a wrapper around skip_spaces() with a really odd calling
convention.
Instead of basing it on skip_spaces(), it should have looked more like
proc_skip_char(), which really is the exact same function (except it
skips a particular character, rather than whitespace). So use that as
inspiration, odd coding and all.
Now the calling convention actually makes sense and works for the
intended purpose.
Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_get_long() is passed a size_t, but then assigns it to an 'int'
variable for the length. Let's not do that, even if our IO paths are
limited to MAX_RW_COUNT (exactly because of these kinds of type errors).
So do the proper test in the rigth type.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide an interface to match a per device domain bus token. This allows to
query which type of domain is installed for a particular domain id. Will be
used for PCI to avoid frequent create/remove cycles for the MSI resp. MSI-X
domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.738047902@linutronix.de
Now that all prerequsites are in place, provide the actual interfaces for
creating and removing per device interrupt domains.
MSI device interrupt domains are created from the provided
msi_domain_template which is duplicated so that it can be modified for the
particular device.
The name of the domain and the name of the interrupt chip are composed by
"$(PREFIX)$(CHIPNAME)-$(DEVNAME)"
$PREFIX: The optional prefix provided by the underlying MSI parent domain
via msi_parent_ops::prefix.
$CHIPNAME: The name of the irq_chip in the template
$DEVNAME: The name of the device
The domain is further initialized through a MSI parent domain callback which
fills in the required functionality for the parent domain or domains further
down the hierarchy. This initialization can fail, e.g. when the requested
feature or MSI domain type cannot be supported.
The domain pointer is stored in the pointer array inside of msi_device_data
which is attached to the domain.
The domain can be removed via the API or left for disposal via devres when
the device is torn down. The API removal is useful e.g. for PCI to have
seperate domains for MSI and MSI-X, which are mutually exclusive and always
occupy the default domain id slot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.678838546@linutronix.de
Split the functionality of msi_create_irq_domain() so it can
be reused for creating per device irq domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.559086358@linutronix.de
To allow proper range checking especially for dynamic allocations add a
size field to struct msi_domain_info. If the field is 0 then the size is
unknown or unlimited (up to MSI_MAX_INDEX) to provide backwards
compability.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.501144862@linutronix.de
MSI parent domains must have some control over the MSI domains which are
built on top. On domain creation they need to fill in e.g. architecture
specific chip callbacks or msi domain ops to make the outermost domain
parent agnostic which is obviously required for architecture independence
etc.
The structure contains:
1) A bitfield which exposes the supported functional features. This
allows to check for features and is also used in the initialization
callback to mask out unsupported features when the actual domain
implementation requests a broader range, e.g. on x86 PCI multi-MSI
is only supported by remapping domains but not by the underlying
vector domain. The PCI/MSI code can then always request multi-MSI
support, but the resulting feature set after creation might not
have it set.
2) An optional string prefix which is put in front of domain and chip
names during creation of the MSI domain. That allows to keep the
naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix
when interrupt remapping is enabled.
3) An initialization callback to sanity check the domain info of
the to be created MSI domain, to restrict features and to
apply changes in MSI ops and interrupt chip callbacks to
accomodate to the particular MSI parent implementation and/or
the underlying hierarchy.
Add a conveniance function to delegate the initialization from the
MSI parent domain to an underlying domain in the hierarchy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
Now that all users are converted remove the old interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.694291814@linutronix.de
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_alloc_irqs_range():
Handles a caller defined precise range
- msi_domain_alloc_irqs_all():
Allocates all interrupts associated to a domain by scanning the
allocated MSI descriptors
The latter is useful for the existing PCI/MSI support which does not have
range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.396497163@linutronix.de
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_free_irqs_range():
Handles a caller defined precise range
- msi_domain_free_irqs_all():
Frees all interrupts associated to a domain
The latter is useful for device teardown and to handle the legacy MSI support
which does not have any range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.337844751@linutronix.de
Allocating simple interrupt descriptors in the core code has to be multi
device irqdomain aware for the upcoming PCI/IMS support.
Change the interfaces to take a domain id into account. Use the internal
control struct for transport of arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.279112474@linutronix.de
Change the descriptor free functions to take a domain id to prepare for the
upcoming multi MSI domain per device support.
To avoid changing and extending the interfaces over and over use an core
internal control struct and hand the pointer through the various functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.220788011@linutronix.de
Change the descriptor allocation and insertion functions to take a domain
id to prepare for the upcoming multi MSI domain per device support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.163043028@linutronix.de
This reflects the functionality better. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.103554618@linutronix.de
In preparation of the upcoming per device multi MSI domain support, change
the interface to support lookups based on domain id and zero based index
within the domain.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.044613697@linutronix.de
To support multiple MSI interrupt domains per device it is necessary to
segment the xarray MSI descriptor storage. Each domain gets up to
MSI_MAX_INDEX entries.
Change the iterators so they operate with domain ids and take the domain
offsets into account.
The publicly available iterators which are mostly used in legacy
implementations and the PCI/MSI core default to MSI_DEFAULT_DOMAIN (0)
which is the id for the existing "global" domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.985498981@linutronix.de
With the upcoming per device MSI interrupt domain support it is necessary
to store the domain pointers per device.
Instead of delegating that storage to device drivers or subsystems add a
domain pointer to the msi_dev_domain array in struct msi_device_data.
This pointer is also used to take care of tearing down the irq domains when
msi_device_data is cleaned up via devres.
The interfaces into the MSI core will be changed from irqdomain pointer
based interfaces to domain id based interfaces to support multiple MSI
domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS.
Once the per device domain support is complete the irq domain pointer in
struct device::msi.domain will not longer contain a pointer to the "global"
MSI domain. It will contain a pointer to the MSI parent domain instead.
It would be a horrible maze of conditionals to evaluate all over the place
which domain pointer should be used, i.e. the "global" one in
device::msi::domain or one from the internal pointer array.
To avoid this evaluate in msi_setup_device_data() whether the irq domain
which is associated to a device is a "global" or a parent MSI domain. If it
is global then copy the pointer into the first entry of the msi_dev_domain
array.
This allows to convert interfaces and implementation to domain ids while
keeping everything existing working.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
The upcoming support for multiple MSI domains per device requires storage
for the MSI descriptors and in a second step storage for the irqdomain
pointers.
Move the xarray into a separate data structure msi_dev_domain and create an
array with size 1 in msi_device_data, which can be expanded later when the
support for per device domains is implemented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.864887773@linutronix.de
In the upcoming per device MSI domain concept the MSI parent domains are
not allowed to be used as regular MSI domains where the MSI allocation/free
operations are applicable.
Add appropriate checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.806128070@linutronix.de
irq_domain::dev is a misnomer as it's usually the rule that a device
pointer points to something which is directly related to the instance.
irq_domain::dev can point to some other device for power management to
ensure that this underlying device is not powered down when an interrupt is
allocated.
The upcoming per device MSI domains really require a pointer to the device
which instantiated the irq domain and not to some random other device which
is required for power management down the chain.
Rename irq_domain::dev to irq_domain::pm_dev and fixup the few sites which
use that pointer.
Conversion was done with the help of coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.574541683@linutronix.de
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
Similar to sk/inode/task local storage, enable sleepable support for
cgrp local storage.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201050444.2785007-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin mentioned that the verifier cannot assume arguments from
LSM hook sk_alloc_security being trusted since after the hook
is called, the sk ref_count is set to 1. This will overwrite
the ref_count changed by the bpf program and may cause ref_count
underflow later on.
I then further checked some other hooks. For example,
for bpf_lsm_file_alloc() hook in fs/file_table.c,
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
The input parameter 'f' to security_file_alloc() cannot be trusted
as well.
Specifically, I investiaged bpf_map/bpf_prog/file/sk/task alloc/free
lsm hooks. Except bpf_map_alloc and task_alloc, arguments for all other
hooks should not be considered as trusted. This may not be a complete
list, but it covers common usage for sk and task.
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203204954.2043348-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
introduced MEM_RCU and bpf_rcu_read_lock/unlock() support. In that
commit, a rcu pointer is tagged with both MEM_RCU and PTR_TRUSTED
so that it can be passed into kfuncs or helpers as an argument.
Martin raised a good question in [1] such that the rcu pointer,
although being able to accessing the object, might have reference
count of 0. This might cause a problem if the rcu pointer is passed
to a kfunc which expects trusted arguments where ref count should
be greater than 0.
This patch makes the following changes related to MEM_RCU pointer:
- MEM_RCU pointer might be NULL (PTR_MAYBE_NULL).
- Introduce KF_RCU so MEM_RCU ptr can be acquired with
a KF_RCU tagged kfunc which assumes ref count of rcu ptr
could be zero.
- For mem access 'b = ptr->a', say 'ptr' is a MEM_RCU ptr, and
'a' is tagged with __rcu as well. Let us mark 'b' as
MEM_RCU | PTR_MAYBE_NULL.
[1] https://lore.kernel.org/bpf/ac70f574-4023-664e-b711-e0d3b18117fd@linux.dev/
Fixes: 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184602.477272-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
see an already freed event
-----BEGIN PGP SIGNATURE-----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=jo4r
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a use-after-free case where the perf pending task callback would
see an already freed event
* tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_pending_task() UaF
When handing the SIGNAL_GROUP_EXIT flag, the info in ksignal isn't cleared.
However, the info acquired by dequeue_synchronous_signal/dequeue_signal is
initialized and can be safely used. Fortunately, the fatal signal process
just uses the si_signo and doesn't use any other member. Even so, the
initialization before use is more safer.
Signed-off-by: haifeng.xu <haifeng.xu@shopee.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221128065606.19570-1-haifeng.xu@shopee.com
Since Warn count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/warn_count to expose it to userspace.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-6-keescook@chromium.org
Like oops_limit, add warn_limit for limiting the number of warnings when
panic_on_warn is not set.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-5-keescook@chromium.org
Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll
their own warnings, and each check "panic_on_warn". Consolidate this
into a single function so that future instrumentation can be added in
a single location.
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The DYING/STARTING callbacks are not expected to fail. However, as reported
by Derek, buggy drivers such as tboot are still free to return errors
within those sections, which halts the hot(un)plug and leaves the CPU in an
unrecoverable state.
As there is no rollback possible, only log the failures and proceed with
the following steps.
This restores the hotplug behaviour prior to commit 453e410851
("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Fixes: 453e410851 ("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Reported-by: Derek Dolney <z23@posteo.net>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Derek Dolney <z23@posteo.net>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215867
Link: https://lore.kernel.org/r/20220927101259.1149636-1-vdonnefort@google.com
Since the boot cpu does not go through the hotplug process it ends
up with state == CPUHP_ONLINE but target == CPUHP_OFFLINE.
So set the target to match in boot_cpu_hotplug_init().
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-3-pauld@redhat.com
Writing the current state back in hotplug/target calls cpu_down()
which will set cpu dying even when it isn't and then nothing will
ever clear it. A stress test that reads values and writes them back
for all cpu device files in sysfs will trigger the BUG() in
select_fallback_rq once all cpus are marked as dying.
kernel/cpu.c::target_store()
...
if (st->state < target)
ret = cpu_up(dev->id, target);
else
ret = cpu_down(dev->id, target);
cpu_down() -> cpu_set_state()
bool bringup = st->state < target;
...
if (cpu_dying(cpu) != !bringup)
set_cpu_dying(cpu, !bringup);
Fix this by letting state==target fall through in the target_store()
conditional. Also make sure st->target == target in that case.
Fixes: 757c989b99 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
Commit ca16d5bee5 ("futex: Prevent robust futex exit race") addressed
two cases when tasks waiting on a robust non-PI futex remained blocked
despite the futex not being owned anymore:
* if the owner died after writing zero to the futex word, but before
waking up a waiter
* if a task waiting on the futex was woken up, but died before updating
the futex word (effectively swallowing the notification without acting
on it)
In the second case, the task could be woken up either by the previous
owner (after the futex word was reset to zero) or by the kernel (after
the OWNER_DIED bit was set and the TID part of the futex word was reset
to zero) if the previous owner died without the resetting the futex.
Because the referenced commit wakes up a potential waiter only if the
whole futex word is zero, the latter subcase remains unaddressed.
Fix this by looking only at the TID part of the futex when deciding
whether a wake up is needed.
Fixes: ca16d5bee5 ("futex: Prevent robust futex exit race")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221111215439.248185-1-izbyshev@ispras.ru
Variable and return descriptions were missing from the SRCU read
lock functions. Add them.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87zgcjpdvo.fsf@jogness.linutronix.de
The console_list_lock provides synchronization for console list and
console->flags updates. All call sites that were using the console_lock
for this synchronization have either switched to use the
console_list_lock or the SRCU list iterator.
Remove console_lock usage for console list updates and console->flags
updates.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-40-john.ogness@linutronix.de
With commit 9e124fe16ff2("xen: Enable console tty by default in domU
if it's not a dummy") a hack was implemented to make sure that the
tty console remains the console behind the /dev/console device. The
main problem with the hack is that, after getting the console pointer
to the tty console, it is assumed the pointer is still valid after
releasing the console_sem. This assumption is incorrect and unsafe.
Make the hack safe by introducing a new function
console_force_preferred_locked() and perform the full operation
under the console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-33-john.ogness@linutronix.de
Currently it is not possible for drivers to detect if they have
already successfully registered their console. Several drivers
have multiple paths that lead to console registration. To avoid
attempting a 2nd registration (which leads to a WARN), drivers
are implementing their own solution.
Introduce console_is_registered() so drivers can easily identify
if their console is currently registered. A _locked() variant
is also provided if the caller is already holding the
console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-22-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal. It is
acceptable because the consoles might come and go at any time.
Strict synchronizing with console registration code would not bring
any advantage over srcu.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-21-john.ogness@linutronix.de
With SRCU it is now safe to traverse the console list, even if
the console_trylock() failed. However, overwriting console->seq
when console_trylock() failed is still an issue.
Switch to SRCU iteration and document remaining issue with
console->seq.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-20-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-19-john.ogness@linutronix.de
All users of console_is_usable() are SRCU iterators. Use the
appropriate wrapper function to locklessly read the flags.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-18-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-17-john.ogness@linutronix.de
Guarantee safe iteration of the console list by using SRCU.
Note that in the case of a handover, the SRCU read lock is also
released. This is documented in the function description and as
comments in the code. It is a bit tricky, but this preserves the
lockdep lock ordering for the context handing over the
console_lock:
console_lock()
| mutex_acquire(&console_lock_dep_map) <-- console lock
|
console_unlock()
| console_flush_all()
| | srcu_read_lock(&console_srcu) <-- srcu lock
| | console_emit_next_record()
| | | console_lock_spinning_disable_and_check()
| | | | srcu_read_unlock(&console_srcu) <-- srcu unlock
| | | | mutex_release(&console_lock_dep_map) <-- console unlock
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-16-john.ogness@linutronix.de
Guarantee safe iteration of the console list by using SRCU.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-15-john.ogness@linutronix.de
After switching to SRCU for console list iteration, some readers
will begin readings console->flags as a data race. Locklessly
reading console->flags provides a consistent value because there
is at most one CPU modifying console->flags and that CPU is
using only read-modify-write operations.
Introduce a wrapper for SRCU iterators to read console flags.
Introduce a matching wrapper to write to flags of registered
consoles. Writing to flags of registered consoles is synchronized
by the console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-13-john.ogness@linutronix.de
Currently there exist races in register_console(), where the types
of registered consoles are checked (without holding the console_lock)
and then after acquiring the console_lock, it is assumed that the list
has not changed. Also, some code that performs console_unregister()
make similar assumptions.
It might be possible to fix these races using the console_lock. But
it would require a complex analysis of all console drivers to make
sure that the console_lock is not taken in match() and setup()
callbacks. And we really prefer to split up and reduce the
responsibilities of console_lock rather than expand its complexity.
Therefore, introduce a new console_list_lock to provide full
synchronization for any console list changes.
In addition, also use console_list_lock for synchronization of
console->flags updates. All flags are either static or modified only
during the console registration. There are only two exceptions.
The first exception is CON_ENABLED, which is also modified by
console_start()/console_stop(). Therefore, these functions must
also take the console_list_lock.
The second exception is when the flags are modified by the console
driver init code before the console is registered. These will be
ignored because they are not visible to the rest of the system
via the console_drivers list.
Note that one of the various responsibilities of the console_lock is
also intended to provide console list and console->flags
synchronization. Later changes will update call sites relying on the
console_lock for these purposes. Once all call sites have been
updated, the console_lock will be relieved of synchronizing
console_list and console->flags updates.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87sficwokr.fsf@jogness.linutronix.de
It used to be that all consoles were synchronized with respect to
which message they were printing. After commit a699449bb1 ("printk:
refactor and rework printing logic"), all consoles have their own
@seq for tracking which message they are on. That commit also changed
how the initial sequence number was chosen. Instead of choosing the
next non-printed message, it chose the sequence number of the next
message that will be added to the ringbuffer.
That change created a possibility that a non-boot console taking over
for a boot console might skip messages if the boot console was behind
and did not have a chance to catch up before being unregistered.
Since it is not known which boot console is the same device, flush
all consoles and, if necessary, start with the message of the enabled
boot console that is the furthest behind. If no boot consoles are
enabled, begin with the next message that will be added to the
ringbuffer.
Also, since boot consoles are meant to be used at boot time, handle
them the same as CON_PRINTBUFFER to ensure that no initial messages
are skipped.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-7-john.ogness@linutronix.de
The code to initialize @seq for a new console needs to consider
more factors when choosing an initial value. Move the code into
a helper function console_init_seq() "as is" so this code can
be expanded without causing register_console() to become too
long. A later commit will implement the additional code.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-6-john.ogness@linutronix.de
The @bootcon_enabled and @realcon_enabled local variables actually
represent if such console types are registered. In general there
has been a confusion about enabled vs. registered. Incorrectly
naming such variables promotes such confusion.
Rename the variables to _registered.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-5-john.ogness@linutronix.de
Provide an NMI-safe SRCU protected variant to walk the console list.
Note that all console fields are now set before adding the console
to the list to avoid the console becoming visible by SCRU readers
before being fully initialized.
This is a preparatory change for a new console infrastructure which
operates independent of the console BKL.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-4-john.ogness@linutronix.de
Replace the open coded single linked list with a hlist so a conversion
to SRCU protected list walks can reuse the existing primitives.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-3-john.ogness@linutronix.de
The elf_check_arch() function is also used to test compatibility of
usermode binaries. Kernel modules may have more specific requirements,
for example powerpc would like to test for ABI version compatibility.
Add a weak module_elf_check_arch() that defaults to true, and call it
from elf_validity_check().
Signed-off-by: Jessica Yu <jeyu@kernel.org>
[np: added changelog, adjust name, rebase]
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-2-npiggin@gmail.com
Consider a verifier state with three acquired references, all with
release_on_unlock = true:
idx 0 1 2
state->refs = [2 4 6]
(with 2, 4, and 6 being the ref ids).
When bpf_spin_unlock is called, process_spin_lock will loop through all
acquired_refs and, for each ref, if it's release_on_unlock, calls
release_reference on it. That function in turn calls
release_reference_state, which removes the reference from state->refs by
swapping the reference state with the last reference state in
refs array and decrements acquired_refs count.
process_spin_lock's loop logic, which is essentially:
for (i = 0; i < state->acquired_refs; i++) {
if (!state->refs[i].release_on_unlock)
continue;
release_reference(state->refs[i].id);
}
will fail to release release_on_unlock references which are swapped from
the end. Running this logic on our example demonstrates:
state->refs = [2 4 6] (start of idx=0 iter)
release state->refs[0] by swapping w/ state->refs[2]
state->refs = [6 4] (start of idx=1)
release state->refs[1], no need to swap as it's the last idx
state->refs = [6] (start of idx=2, loop terminates)
ref_id 6 should have been removed but was skipped.
Fix this by looping from back-to-front, which results in refs that are
candidates for removal being swapped with refs which have already been
examined and kept.
If we modify our initial example such that ref 6 is replaced with ref 7,
which is _not_ release_on_unlock, and loop from the back, we'd see:
state->refs = [2 4 7] (start of idx=2)
state->refs = [2 4 7] (start of idx=1)
state->refs = [2 7] (start of idx=0, refs 7 and 4 swapped)
state->refs = [7] (after idx=0, 7 and 2 swapped, loop terminates)
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 534e86bc6c ("bpf: Add 'release on unlock' logic for bpf_list_push_{front,back}")
Link: https://lore.kernel.org/r/20221201183406.1203621-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
1. With CONFIG_JUMP_LABEL=n static_key_slow_inc() doesn't have any
protection against key->enabled refcounter overflow.
2. With CONFIG_JUMP_LABEL=y static_key_slow_inc_cpuslocked()
still may turn the refcounter negative as (v + 1) may overflow.
key->enabled is indeed a ref-counter as it's documented in multiple
places: top comment in jump_label.h, Documentation/staging/static-keys.rst,
etc.
As -1 is reserved for static key that's in process of being enabled,
functions would break with negative key->enabled refcount:
- for CONFIG_JUMP_LABEL=n negative return of static_key_count()
breaks static_key_false(), static_key_true()
- the ref counter may become 0 from negative side by too many
static_key_slow_inc() calls and lead to use-after-free issues.
These flaws result in that some users have to introduce an additional
mutex and prevent the reference counter from overflowing themselves,
see bpf_enable_runtime_stats() checking the counter against INT_MAX / 2.
Prevent the reference counter overflow by checking if (v + 1) > 0.
Change functions API to return whether the increment was successful.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds lockdep checks for illegal use of synchronize_srcu()
within same-type SRCU read-side critical sections and within normal
RCU read-side critical sections. It also makes synchronize_srcu()
be a no-op during early boot.
These changes bring Tiny synchronize_srcu() into line with both Tree
synchronize_srcu() and Tiny synchronize_rcu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
The system memory map can change over a hibernation-restore cycle due
to a defect in the platform firmware, and some of the page frames used
by the kernel before hibernation may not be available any more during
the subsequent restore which leads to the error below.
[ T357] PM: Image loading progress: 0%
[ T357] PM: Read 2681596 kbytes in 0.03 seconds (89386.53 MB/s)
[ T357] PM: Error -14 resuming
[ T357] PM: Failed to load hibernation image, recovering.
[ T357] PM: Basic memory bitmaps freed
[ T357] OOM killer enabled.
[ T357] Restarting tasks ... done.
[ T357] PM: resume from hibernation failed (-14)
[ T357] PM: Hibernation image not present or could not be loaded.
Add an error message to the unpack() function to allow problematic
page frames to be identified and the source of the problem to be
diagnosed more easily. This can save developers quite a bit of
debugging time.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
[ rjw: New subject, edited changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since Oops count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/oops_count to expose it to userspace.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org
Many Linux systems are configured to not panic on oops; but allowing an
attacker to oops the system **really** often can make even bugs that look
completely unexploitable exploitable (like NULL dereferences and such) if
each crash elevates a refcount by one or a lock is taken in read mode, and
this causes a counter to eventually overflow.
The most interesting counters for this are 32 bits wide (like open-coded
refcounts that don't use refcount_t). (The ldsem reader count on 32-bit
platforms is just 16 bits, but probably nobody cares about 32-bit platforms
that much nowadays.)
So let's panic the system if the kernel is constantly oopsing.
The speed of oopsing 2^32 times probably depends on several factors, like
how long the stack trace is and which unwinder you're using; an empirically
important one is whether your console is showing a graphical environment or
a text console that oopses will be printed to.
In a quick single-threaded benchmark, it looks like oopsing in a vfork()
child with a very short stack trace only takes ~510 microseconds per run
when a graphical console is active; but switching to a text console that
oopses are printed to slows it down around 87x, to ~45 milliseconds per
run.
(Adding more threads makes this faster, but the actual oops printing
happens under &die_lock on x86, so you can maybe speed this up by a factor
of around 2 and then any further improvement gets eaten up by lock
contention.)
It looks like it would take around 8-12 days to overflow a 32-bit counter
with repeated oopsing on a multi-core X86 system running a graphical
environment; both me (in an X86 VM) and Seth (with a distro kernel on
normal hardware in a standard configuration) got numbers in that ballpark.
12 days aren't *that* short on a desktop system, and you'd likely need much
longer on a typical server system (assuming that people don't run graphical
desktop environments on their servers), and this is a *very* noisy and
violent approach to exploiting the kernel; and it also seems to take orders
of magnitude longer on some machines, probably because stuff like EFI
pstore will slow it down a ton if that's active.
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20221107201317.324457-1-jannh@google.com
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-2-keescook@chromium.org
In preparation for adding more sysctls directly in kernel/panic.c, split
CONFIG_SMP from the logic that adds sysctls.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-1-keescook@chromium.org
Use only one hyphen in kernel-doc notation between the function name
and its short description.
The is the documented kerenl-doc format. It also fixes the HTML
presentation to be consistent with other functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20221201070331.25685-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the introduction of clockevents, i.e., commit d316c57ff6
("clockevents: add core functionality"), there has been a mismatch between
the function and the kernel-doc comment for clockevent_delta2ns().
Hence, ./scripts/kernel-doc -none kernel/time/clockevents.c warns about it.
Adjust the kernel-doc comment for clockevent_delta2ns() for make W=1
happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221102091048.15068-1-lukas.bulwahn@gmail.com
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/202211301601416229001@zte.com.cn
find_timens_vvar_page() is not architecture-specific, as can be seen from
how all five per-architecture versions of it are the same.
(arm64, powerpc and riscv are exactly the same; x86 and s390 have two
characters difference inside a comment, less blank lines, and mark the
!CONFIG_TIME_NS version as inline.)
Refactor the five copies into a central copy in kernel/time/namespace.c.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130115320.2918447-1-jannh@google.com
When building the kernel with clang lto (CONFIG_LTO_CLANG_FULL=y), the
following compilation error will appear:
$ make LLVM=1 LLVM_IAS=1 -j
...
ld.lld: error: ld-temp.o <inline asm>:26889:1: symbol 'cgroup_storage_map_btf_ids' is already defined
cgroup_storage_map_btf_ids:;
^
make[1]: *** [/.../bpf-next/scripts/Makefile.vmlinux_o:61: vmlinux.o] Error 1
In local_storage.c, we have
BTF_ID_LIST_SINGLE(cgroup_storage_map_btf_ids, struct, bpf_local_storage_map)
Commit c4bcfb38a9 ("bpf: Implement cgroup storage available to
non-cgroup-attached bpf progs") added the above identical BTF_ID_LIST_SINGLE
definition in bpf_cgrp_storage.c. With duplicated definitions, llvm linker
complains with lto build.
Also, extracting btf_id of 'struct bpf_local_storage_map' is defined four times
for sk, inode, task and cgrp local storages. Let us define a single global one
with a different name than cgroup_storage_map_btf_ids, which also fixed
the lto compilation error.
Fixes: c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221130052147.1591625-1-yhs@fb.com
Following the pattern of io_uring, perf, skb, and bpf, iommfd will use
user->locked_vm for accounting pinned pages. Ensure the value is included
in the struct and export free_uid() as iommufd is modular.
user->locked_vm is the good accounting to use for ulimit because it is
per-user, and the security sandboxing of locked pages is not supposed to
be per-process. Other places (vfio, vdpa and infiniband) have used
mm->pinned_vm and/or mm->locked_vm for accounting pinned pages, but this
is only per-process and inconsistent with the new FOLL_LONGTERM users in
the kernel.
Concurrent work is underway to try to put this in a cgroup, so everything
can be consistent and the kernel can provide a FOLL_LONGTERM limit that
actually provides security.
Link: https://lore.kernel.org/r/7-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The integer overflow is descripted with following codes:
> 317 static comp_t encode_comp_t(u64 value)
> 318 {
> 319 int exp, rnd;
......
> 341 exp <<= MANTSIZE;
> 342 exp += value;
> 343 return exp;
> 344 }
Currently comp_t is defined as type of '__u16', but the variable 'exp' is
type of 'int', so overflow would happen when variable 'exp' in line 343 is
greater than 65535.
Link: https://lkml.kernel.org/r/20210515140631.369106-3-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix encode_comp_t()".
Type conversion in encode_comp_t() may look a bit problematic.
This patch (of 2):
See calculation of ac_{u,s}time in fill_ac():
> ac->ac_utime = encode_comp_t(nsec_to_AHZ(pacct->ac_utime));
> ac->ac_stime = encode_comp_t(nsec_to_AHZ(pacct->ac_stime));
Return value of nsec_to_AHZ() is always type of 'u64', but it is handled
as type of 'unsigned long' in encode_comp_t, and accuracy loss would
happen on 32-bit platform when 'unsigned long' value is 32-bit-width.
So 'u64' value of encode_comp_t() may look better.
Link: https://lkml.kernel.org/r/20210515140631.369106-1-zhengyejian1@huawei.com
Link: https://lkml.kernel.org/r/20210515140631.369106-2-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Though vmcoreinfo is intended to be small, at just one page, useful
information is still added to it, so we risk running out of space.
Currently there is no runtime check to see whether the vmcoreinfo buffer
has been exhausted. Add a warning for this case.
Currently, my static checking tool[1] indicates that a good upper bound
for vmcoreinfo size is currently 3415 bytes, but the best time to add
warnings is before the risk becomes too high.
[1] https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/vmcoreinfosize.py
Link: https://lkml.kernel.org/r/20221027205008.312534-1-stephen.s.brennan@oracle.com
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The percpu_counter is used for scenarios where performance is more
important than the accuracy. For percpu_counter users, who want more
accurate information in their slowpath, percpu_counter_sum is provided
which traverses all the online CPUs to accumulate the data. The reason it
only needs to traverse online CPUs is because percpu_counter does
implement CPU offline callback which syncs the local data of the offlined
CPU.
However there is a small race window between the online CPUs traversal of
percpu_counter_sum and the CPU offline callback. The offline callback has
to traverse all the percpu_counters on the system to flush the CPU local
data which can be a lot. During that time, the CPU which is going offline
has already been published as offline to all the readers. So, as the
offline callback is running, percpu_counter_sum can be called for one
counter which has some state on the CPU going offline. Since
percpu_counter_sum only traverses online CPUs, it will skip that specific
CPU and the offline callback might not have flushed the state for that
specific percpu_counter on that offlined CPU.
Normally this is not an issue because percpu_counter users can deal with
some inaccuracy for small time window. However a new user i.e. mm_struct
on the cleanup path wants to check the exact state of the percpu_counter
through check_mm(). For such users, this patch introduces
percpu_counter_sum_all() which traverses all possible CPUs and it is used
in fork.c:check_mm() to avoid the potential race.
This issue is exposed by the later patch "mm: convert mm's rss stats into
percpu_counter".
Link: https://lkml.kernel.org/r/20221109012011.881058-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently mm_struct maintains rss_stats which are updated on page fault
and the unmapping codepaths. For page fault codepath the updates are
cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64.
The reason for caching is performance for multithreaded applications
otherwise the rss_stats updates may become hotspot for such applications.
However this optimization comes with the cost of error margin in the rss
stats. The rss_stats for applications with large number of threads can be
very skewed. At worst the error margin is (nr_threads * 64) and we have a
lot of applications with 100s of threads, so the error margin can be very
high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32.
Recently we started seeing the unbounded errors for rss_stats for specific
applications which use TCP rx0cp. It seems like vm_insert_pages()
codepath does not sync rss_stats at all.
This patch converts the rss_stats into percpu_counter to convert the error
margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However
this conversion enable us to get the accurate stats for situations where
accuracy is more important than the cpu cost.
This patch does not make such tradeoffs - we can just use
percpu_counter_add_local() for the updates and percpu_counter_sum() (or
percpu_counter_sync() + percpu_counter_read) for the readers. At the
moment the readers are either procfs interface, oom_killer and memory
reclaim which I think are not performance critical and should be ok with
slow read. However I think we can make that change in a separate patch.
Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The networking programs typically don't require CAP_PERFMON, but through kfuncs
like bpf_cast_to_kern_ctx() they can access memory through PTR_TO_BTF_ID. In
such case enforce CAP_PERFMON.
Also make sure that only GPL programs can access kernel data structures.
All kfuncs require GPL already.
Also remove allow_ptr_to_map_access. It's the same as allow_ptr_leaks and
different name for the same check only causes confusion.
Fixes: fd264ca020 ("bpf: Add a kfunc to type cast from bpf uapi ctx to kernel ctx")
Fixes: 50c6b8a9ae ("selftests/bpf: Add a test for btf_type_tag "percpu"")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221125220617.26846-1-alexei.starovoitov@gmail.com
As explained in [1], we would like to remove SLOB if possible.
- There are no known users that need its somewhat lower memory footprint
so much that they cannot handle SLUB (after some modifications by the
previous patches) instead.
- It is an extra maintenance burden, and a number of features are
incompatible with it.
- It blocks the API improvement of allowing kfree() on objects allocated
via kmem_cache_alloc().
As the first step, rename the CONFIG_SLOB option in the slab allocator
configuration choice to CONFIG_SLOB_DEPRECATED. Add CONFIG_SLOB
depending on CONFIG_SLOB_DEPRECATED as an internal option to avoid code
churn. This will cause existing .config files and defconfigs with
CONFIG_SLOB=y to silently switch to the default (and recommended
replacement) SLUB, while still allowing SLOB to be configured by anyone
that notices and needs it. But those should contact the slab maintainers
and linux-mm@kvack.org as explained in the updated help. With no valid
objections, the plan is to update the existing defconfigs to SLUB and
remove SLOB in a few cycles.
To make SLUB more suitable replacement for SLOB, a CONFIG_SLUB_TINY
option was introduced to limit SLUB's memory overhead.
There is a number of defconfigs specifying CONFIG_SLOB=y. As part of
this patch, update them to select CONFIG_SLUB and CONFIG_SLUB_TINY.
[1] https://lore.kernel.org/all/b35c3f82-f67b-2103-7d82-7a7ba7521439@suse.cz/
Cc: Russell King <linux@armlinux.org.uk>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Conor Dooley <conor@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> # riscv k210
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Earlier commits in this series allow battery-powered systems to build
their kernels with the default-disabled CONFIG_RCU_LAZY=y Kconfig option.
This Kconfig option causes call_rcu() to delay its callbacks in order
to batch them. This means that a given RCU grace period covers more
callbacks, thus reducing the number of grace periods, in turn reducing
the amount of energy consumed, which increases battery lifetime which
can be a very good thing. This is not a subtle effect: In some important
use cases, the battery lifetime is increased by more than 10%.
This CONFIG_RCU_LAZY=y option is available only for CPUs that offload
callbacks, for example, CPUs mentioned in the rcu_nocbs kernel boot
parameter passed to kernels built with CONFIG_RCU_NOCB_CPU=y.
Delaying callbacks is normally not a problem because most callbacks do
nothing but free memory. If the system is short on memory, a shrinker
will kick all currently queued lazy callbacks out of their laziness,
thus freeing their memory in short order. Similarly, the rcu_barrier()
function, which blocks until all currently queued callbacks are invoked,
will also kick lazy callbacks, thus enabling rcu_barrier() to complete
in a timely manner.
However, there are some cases where laziness is not a good option.
For example, synchronize_rcu() invokes call_rcu(), and blocks until
the newly queued callback is invoked. It would not be a good for
synchronize_rcu() to block for ten seconds, even on an idle system.
Therefore, synchronize_rcu() invokes call_rcu_hurry() instead of
call_rcu(). The arrival of a non-lazy call_rcu_hurry() callback on a
given CPU kicks any lazy callbacks that might be already queued on that
CPU. After all, if there is going to be a grace period, all callbacks
might as well get full benefit from it.
Yes, this could be done the other way around by creating a
call_rcu_lazy(), but earlier experience with this approach and
feedback at the 2022 Linux Plumbers Conference shifted the approach
to call_rcu() being lazy with call_rcu_hurry() for the few places
where laziness is inappropriate.
And another call_rcu() instance that cannot be lazy is the one
in queue_rcu_work(), given that callers to queue_rcu_work() are
not necessarily OK with long delays.
Therefore, make queue_rcu_work() use call_rcu_hurry() in order to revert
to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Invoking ./scripts/kernel-doc -none kernel/notifier.c warns:
kernel/notifier.c:71: warning: Excess function parameter 'returns' description in 'notifier_call_chain'
kernel/notifier.c:119: warning: Function parameter or member 'v' not described in 'notifier_call_chain_robust'
These two warning are easy to fix, as they are just due to some minor slips
that makes the comment not follow kernel-doc's syntactic expectation.
Fix those minor slips in kernel-doc comments for make W=1 happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fault injection tests trigger warnings like this:
kernfs: can not remove 'chip_name', no directory
WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
Call Trace:
<TASK>
remove_files.isra.1+0x3f/0xb0
sysfs_remove_group+0x68/0xe0
sysfs_remove_groups+0x41/0x70
__kobject_del+0x45/0xc0
kobject_del+0x29/0x40
free_desc+0x42/0x70
irq_free_descs+0x5e/0x90
The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.
A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.
Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.
To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.
[ tglx: Massage changelog, comments and use a state bit. ]
Fixes: ecb3f394c5 ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com
Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build
failures. This causes trouble for deep embedded systems. But given
that there are more than 25 instances of "select SRCU" in the kernel,
it is hard to believe that there are many kernels running in production
without SRCU. This commit therefore makes SRCU mandatory. The SRCU
Kconfig option remains for backwards compatibility, and will be removed
when it is no longer used.
[ paulmck: Update per kernel test robot feedback. ]
Reported-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: John Ogness <john.ogness@linutronix.de>
call_rcu() changes to save power will change the behavior of rcutorture
tests. Use the call_rcu_hurry() API instead which reverts to the old
behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
rcuscale uses call_rcu() to queue async readers. With recent changes to
save power, the test will have fewer async readers in flight. Use the
call_rcu_hurry() API instead to revert to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
call_rcu() changes to save power will slow down rcu sync. Use the
call_rcu_hurry() API instead which reverts to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds 2 tests to rcuscale. The first one is a startup test
to check whether we are not too lazy or too hard working. The second
one causes kfree_rcu() itself to use call_rcu() and checks memory
pressure. Testing indicates that the new call_rcu() keeps memory pressure
under control roughly as well as does kfree_rcu().
[ paulmck: Apply checkpatch feedback. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The shrinker is used to speed up the free'ing of memory potentially held
by RCU lazy callbacks. RCU kernel module test cases show this to be
effective. Test is introduced in a later patch.
Signed-off-by: Vineeth Pillai <vineeth@bitbyteword.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This consolidates the code a bit and makes it cleaner. Functionally it
is the same.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Implement timer-based RCU callback batching (also known as lazy
callbacks). With this we save about 5-10% of power consumed due
to RCU requests that happen when system is lightly loaded or idle.
By default, all async callbacks (queued via call_rcu) are marked
lazy. An alternate API call_rcu_hurry() is provided for the few users,
for example synchronize_rcu(), that need the old behavior.
The batch is flushed whenever a certain amount of time has passed, or
the batch on a particular CPU grows too big. Also memory pressure will
flush it in a future patch.
To handle several corner cases automagically (such as rcu_barrier() and
hotplug), we re-use bypass lists which were originally introduced to
address lock contention, to handle lazy CBs as well. The bypass list
length has the lazy CB length included in it. A separate lazy CB length
counter is also introduced to keep track of the number of lazy CBs.
[ paulmck: Fix formatting of inline call_rcu_lazy() definition. ]
[ paulmck: Apply Zqiang feedback. ]
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Suggested-by: Paul McKenney <paulmck@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
Per syzbot it is possible for perf_pending_task() to run after the
event is free()'d. There are two related but distinct cases:
- the task_work was already queued before destroying the event;
- destroying the event itself queues the task_work.
The first cannot be solved using task_work_cancel() since
perf_release() itself might be called from a task_work (____fput),
which means the current->task_works list is already empty and
task_work_cancel() won't be able to find the perf_pending_task()
entry.
The simplest alternative is extending the perf_event lifetime to cover
the task_work.
The second is just silly, queueing a task_work while you know the
event is going away makes no sense and is easily avoided by
re-arranging how the event is marked STATE_DEAD and ensuring it goes
through STATE_OFF on the way down.
Reported-by: syzbot+9228d6098455bb209ec8@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY4AC5QAKCRDbK58LschI
g1e0AQCfAqduTy7mYd02jDNCV0wLphNp9FbPiP9OrQT37ABpKAEA1ulj1X59bX3d
HnZdDKuatcPZT9MV5hDLM7MFJ9GjOA4=
=fNmM
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix osnoise duration type to 64bit not 32bit.
- Have histogram triggers be able to handle an unexpected NULL pointer
for the record event, that can happen when the histogram first starts up.
- Clear out ring buffers when dynamic events are removed, as the type
that is saved in the ring buffer is used to read the event, and a
stale type that is reused by another event could cause use after free
issues.
- Trivial comment fix.
- Fix memory leak in user_event_create().
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY4UPShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qo3qAQCz2R814gCo54WEDcvRUmAmF9BSE2b5
wtaDfeyXQYbaMwEA4+cuNoMMlQvbVbmcss/Uh7RpRCB8+24iypeiEZNtIgg=
=GPrG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix osnoise duration type to 64bit not 32bit
- Have histogram triggers be able to handle an unexpected NULL pointer
for the record event, which can happen when the histogram first
starts up
- Clear out ring buffers when dynamic events are removed, as the type
that is saved in the ring buffer is used to read the event, and a
stale type that is reused by another event could cause use after free
issues
- Trivial comment fix
- Fix memory leak in user_event_create()
* tag 'trace-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Free buffers when a used dynamic event is removed
tracing: Add tracing_reset_all_online_cpus_unlocked() function
tracing: Fix race where histograms can be called before the event
tracing/osnoise: Fix duration type
tracing/user_events: Fix memory leak in user_event_create()
tracing/hist: add in missing * in comment blocks
If user_event_trace_register() fails within user_event_parse() the
call's print_fmt member is not freed. Add kfree call to fix this.
Link: https://lkml.kernel.org/r/20221123183248.554-1-beaub@linux.microsoft.com
Fixes: aa3b2b4c66 ("user_events: Add print_fmt generation support for basic types")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372b ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag.
Link: https://lore.kernel.org/all/20221126114316.201857-1-lihuafei1@huawei.com/
Fixes: 3031313eb3 ("kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- output the address in the sample only when it has been requested
- handle the case where user-only events can hit in kernel and thus
upset the sigtrap sanity checking
-----BEGIN PGP SIGNATURE-----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=9CQa
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
"Two more fixes to the perf sigtrap handling:
- output the address in the sample only when it has been requested
- handle the case where user-only events can hit in kernel and thus
upset the sigtrap sanity checking"
* tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Consider OS filter fail
perf: Fixup SIGTRAP and sample_flags interaction
- Revert a recent schedutil cpufreq governor change that introduced
a performace regression on Pixel 6 (Sam Wu).
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny).
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan).
- Update amd-pstate documentation in accordance with the other changes
made to it (Perry Yuan).
-----BEGIN PGP SIGNATURE-----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=+qZV
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
had not been expected to make any functional difference, but turned
out to introduce a performance regression, fix an initialization issue
in the amd-pstate driver and make it actually replace the venerable
ACPI cpufreq driver on the supported systems by default.
Specifics:
- Revert a recent schedutil cpufreq governor change that introduced a
performace regression on Pixel 6 (Sam Wu)
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny)
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan)
- Update amd-pstate documentation in accordance with the other
changes made to it (Perry Yuan)"
* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: add amd-pstate kernel command line options
Documentation: amd-pstate: add driver working mode introduction
cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
cpufreq: amd-pstate: change amd-pstate driver to be built-in type
cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"
There have been a lot of hotfixes this cycle, and this is quite a large
batch given how far we are into the -rc cycle. Presumably a reflection of
the unusually large amount of MM material which went into 6.1-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4Bd6gAKCRDdBJ7gKXxA
jvX6AQCsG1ld24kMpdD+70XXUyC29g/6/jribgtZApHyDYjxSwD/WmLNpPlUPRax
WB071Y5w65vjSTUKvwU0OLGbHwyxgAw=
=swD5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
list_for_each_entry_reverse() assumes that the iterated list is nonempty
and that every list_head is embedded in the same type, but its use in
padata_do_serial() breaks both rules.
This doesn't cause any issues now because padata_priv and padata_list
happen to have their list fields at the same offset, but we really
shouldn't be relying on that.
Fixes: bfde23ce20 ("padata: unbind parallel jobs from specific CPUs")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:
padata_do_parallel
->parallel()
pcrypt_aead_enc/dec
padata_do_serial
spin_lock(&reorder->lock) // BHs still enabled
<interrupt>
...
__do_softirq
...
padata_do_serial
spin_lock(&reorder->lock)
It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation.
Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com
Fixes: 4611ce2246 ("padata: allocate work structures for parallel jobs from a pool")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PTR_TRUSTED flag should only be applied to pointers where the verifier can
guarantee that such pointers are valid.
The fentry/fexit/fmod_ret programs are not in this category.
Only arguments of SEC("tp_btf") and SEC("iter") programs are trusted
(which have BPF_TRACE_RAW_TP and BPF_TRACE_ITER attach_type correspondingly)
This bug was masked because convert_ctx_accesses() was converting trusted
loads into BPF_PROBE_MEM loads. Fix it as well.
The loads from trusted pointers don't need exception handling.
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221124215314.55890-1-alexei.starovoitov@gmail.com
Add two kfunc's bpf_rcu_read_lock() and bpf_rcu_read_unlock(). These two kfunc's
can be used for all program types. The following is an example about how
rcu pointer are used w.r.t. bpf_rcu_read_lock()/bpf_rcu_read_unlock().
struct task_struct {
...
struct task_struct *last_wakee;
struct task_struct __rcu *real_parent;
...
};
Let us say prog does 'task = bpf_get_current_task_btf()' to get a
'task' pointer. The basic rules are:
- 'real_parent = task->real_parent' should be inside bpf_rcu_read_lock
region. This is to simulate rcu_dereference() operation. The
'real_parent' is marked as MEM_RCU only if (1). task->real_parent is
inside bpf_rcu_read_lock region, and (2). task is a trusted ptr. So
MEM_RCU marked ptr can be 'trusted' inside the bpf_rcu_read_lock region.
- 'last_wakee = real_parent->last_wakee' should be inside bpf_rcu_read_lock
region since it tries to access rcu protected memory.
- the ptr 'last_wakee' will be marked as PTR_UNTRUSTED since in general
it is not clear whether the object pointed by 'last_wakee' is valid or
not even inside bpf_rcu_read_lock region.
The verifier will reset all rcu pointer register states to untrusted
at bpf_rcu_read_unlock() kfunc call site, so any such rcu pointer
won't be trusted any more outside the bpf_rcu_read_lock() region.
The current implementation does not support nested rcu read lock
region in the prog.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053217.2373910-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_func_proto->might_sleep to indicate a particular helper
might sleep. This will make later check whether a helper might be
sleepable or not easier.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053211.2373553-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Expose new interfaces for this: timer_shutdown_sync() and timer_shutdown().
timer_shutdown_sync() has the same functionality as timer_delete_sync()
plus the NULL-ification of the timer function.
timer_shutdown() has the same functionality as timer_delete() plus the
NULL-ification of the timer function.
In both cases the rearming of the timer is prevented by silently discarding
rearm attempts due to timer->function being NULL.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201625.314230270@linutronix.de
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Add a shutdown argument to the relevant internal functions which makes the
actual deactivation code set timer->function to NULL which in turn prevents
rearming of the timer.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201625.253883224@linutronix.de
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Split the inner workings of try_do_del_timer_sync(), del_timer_sync() and
del_timer() into helper functions to prepare for implementing the shutdown
functionality.
No functional change.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201625.195147423@linutronix.de
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
In preparation for that replace the warnings in the relevant code paths
with checks for timer->function == NULL. If the pointer is NULL, then
discard the rearm request silently.
Add debug_assert_init() instead of the WARN_ON_ONCE(!timer->function)
checks so that debug objects can warn about non-initialized timers.
The warning of debug objects does not warn if timer->function == NULL. It
warns when timer was not initialized using timer_setup[_on_stack]() or via
DEFINE_TIMER(). If developers fail to enable debug objects and then waste
lots of time to figure out why their non-initialized timer is not firing,
they deserve it. Same for initializing a timer with a NULL function.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/87wn7kdann.ffs@tglx
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer() to timer_delete() and provide del_timer()
as a wrapper. Document that del_timer() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201625.015535022@linutronix.de
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer_sync() to timer_delete_sync() and provide del_timer_sync()
as a wrapper. Document that del_timer_sync() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.954785441@linutronix.de
del_timer_sync() is assumed to be pointless on uniprocessor systems and can
be mapped to del_timer() because in theory del_timer() can never be invoked
while the timer callback function is executed.
This is not entirely true because del_timer() can be invoked from interrupt
context and therefore hit in the middle of a running timer callback.
Contrary to that del_timer_sync() is not allowed to be invoked from
interrupt context unless the affected timer is marked with TIMER_IRQSAFE.
del_timer_sync() has proper checks in place to detect such a situation.
Give up on the UP optimization and make del_timer_sync() unconditionally
available.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201624.888306160@linutronix.de
The kernel-doc of timer related functions is partially uncomprehensible
word salad. Rewrite it to make it useful.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.828703870@linutronix.de
The timer code still has a few BUG_ON()s left which are crashing the kernel
in situations where it still can recover or simply refuse to take an
action.
Remove the one in the hotplug callback which checks for the CPU being
offline. If that happens then the whole hotplug machinery will explode in
colourful ways.
Replace the rest with WARN_ON_ONCE() and conditional returns where
appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.769128888@linutronix.de
del_singleshot_timer_sync() used to be an optimization for deleting timers
which are not rearmed from the timer callback function.
This optimization turned out to be broken and got mapped to
del_timer_sync() about 17 years ago.
Get rid of the undocumented indirection and use del_timer_sync() directly.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.706987932@linutronix.de
Event group from different hw pmus does not make sense and thus perf
has never allowed it. However, with recent rewrite that restriction
has been inadvertently removed. Fix it.
Fixes: bd27568117 ("perf: Rewrite core context handling")
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221122080326.228-1-ravi.bangoria@amd.com
With the advent of CFI it is no longer acceptible to cast function
pointers.
The robot complains thusly:
kernel-events-core.c⚠️cast-from-int-(-)(struct-perf_cpu_pmu_context-)-to-remote_function_f-(aka-int-(-)(void-)-)-converts-to-incompatible-function-type
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Some PMUs (notably the traditional hardware kind) have boundary issues
with the OS filter. Specifically, it is possible for
perf_event_attr::exclude_kernel=1 events to trigger in-kernel due to
SKID or errata.
This can upset the sigtrap logic some and trigger the WARN.
However, if this invalid sample is the first we must not loose the
SIGTRAP, OTOH if it is the second, it must not override the
pending_addr with a (possibly) invalid one.
Fixes: ca6c21327c ("perf: Fix missing SIGTRAPs")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lkml.kernel.org/r/Y3hDYiXwRnJr8RYG@xpf.sh.intel.com
Callers can currently store tasks as kptrs using bpf_task_acquire(),
bpf_task_kptr_get(), and bpf_task_release(). These are useful if a
caller already has a struct task_struct *, but there may be some callers
who only have a pid, and want to look up the associated struct
task_struct * from that to e.g. find task->comm.
This patch therefore adds a new bpf_task_from_pid() kfunc which allows
BPF programs to get a struct task_struct * kptr from a pid.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122145300.251210-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Song Shuai reported:
The list func (ftrace_ops_list_func) will be patched first
before the transition between old and new calls are set,
which fixed the race described in this commit `59338f75`.
While ftrace_trace_function changes from the list func to a
ftrace_ops func, like unregistering the klp_ops to leave the only
global_ops in ftrace_ops_list, the ftrace_[regs]_call will be
replaced with the list func although it already exists. So there
should be a condition to avoid this.
And suggested using another variable to keep track of what the ftrace
function is set to. But this could be simplified by using a helper
function that does the same with a static variable.
Link: https://lore.kernel.org/lkml/20221026132039.2236233-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221122180905.737b6f52@gandalf.local.home
Reported-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit 060fa5c83e ("tracing/events: reuse trace event ids after
overflow"), trace events with dynamic type are linked up in list
'ftrace_event_list' through field 'trace_event.list'. Then when max
event type number used up, it's possible to reuse type number of some
freed one by traversing 'ftrace_event_list'.
As instead, using IDA to manage available type numbers can make codes
simpler and then the field 'trace_event.list' can be dropped.
Since 'struct trace_event' is used in static tracepoints, drop
'trace_event.list' can make vmlinux smaller. Local test with about 2000
tracepoints, vmlinux reduced about 64KB:
before：-rwxrwxr-x 1 root root 76669448 Nov 8 17:14 vmlinux
after： -rwxrwxr-x 1 root root 76604176 Nov 8 17:15 vmlinux
Link: https://lkml.kernel.org/r/20221110020319.1259291-1-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After change in commit 4239174570 ("tracing: Make tracepoint_printk a
static_key"), this symbol is not used outside of the file, so mark it
static.
Link: https://lkml.kernel.org/r/20221122091456.72055-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch uses strndup_user instead of kzalloc + strncpy_from_user,
which makes the code more concise.
Link: https://lkml.kernel.org/r/20221121080831.707409-1-nashuiliang@gmail.com
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the tracing/osnoise/options file to control
osnoise/timerlat tracer features. It is a single
file to contain multiple features, similar to
the sched/features file.
Reading the file displays a list of options. Writing
the OPTION_NAME enables it, writing NO_OPTION_NAME disables
it.
The DEAFULTS is a particular option that resets the options
to the default ones.
It uses a bitmask to keep track of the status of the option. When
needed, we can add a list of static keys, but for now
it does not justify the memory increase.
Link: https://lkml.kernel.org/r/f8d34aefdb225d2603fcb4c02a120832a0cd3339.1668692096.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit a389d86f7f ("ring-buffer: Have nested events still record
running time stamp"), the "event" parameter is no longer used in either
ring_buffer_unlock_commit() or rb_commit(). Best to remove it.
Link: https://lkml.kernel.org/r/1666274811-24138-1-git-send-email-chensong_2000@189.cn
Signed-off-by: Song Chen <chensong_2000@189.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow triggers to be enabled at kernel boot up. For example:
trace_trigger="sched_switch.stacktrace if prev_state == 2"
The above will enable the stacktrace trigger on top of the sched_switch
event and only trigger if its prev_state is 2 (TASK_UNINTERRUPTIBLE). Then
at boot up, a stacktrace will trigger and be recorded in the tracing ring
buffer every time the sched_switch happens where the previous state is
TASK_INTERRUPTIBLE.
Another useful trigger would be "traceoff" which can stop tracing on an
event if a field of the event matches a certain value defined by the
filter ("if" statement).
Link: https://lore.kernel.org/linux-trace-kernel/20221020210056.0d8d0a5b@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After 65536 dynamic events have been added and removed, the "type" field
of the event then uses the first type number that is available (not
currently used by other events). A type number is the identifier of the
binary blobs in the tracing ring buffer (known as events) to map them to
logic that can parse the binary blob.
The issue is that if a dynamic event (like a kprobe event) is traced and
is in the ring buffer, and then that event is removed (because it is
dynamic, which means it can be created and destroyed), if another dynamic
event is created that has the same number that new event's logic on
parsing the binary blob will be used.
To show how this can be an issue, the following can crash the kernel:
# cd /sys/kernel/tracing
# for i in `seq 65536`; do
echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events
# done
For every iteration of the above, the writing to the kprobe_events will
remove the old event and create a new one (with the same format) and
increase the type number to the next available on until the type number
reaches over 65535 which is the max number for the 16 bit type. After it
reaches that number, the logic to allocate a new number simply looks for
the next available number. When an dynamic event is removed, that number
is then available to be reused by the next dynamic event created. That is,
once the above reaches the max number, the number assigned to the event in
that loop will remain the same.
Now that means deleting one dynamic event and created another will reuse
the previous events type number. This is where bad things can happen.
After the above loop finishes, the kprobes/foo event which reads the
do_sys_openat2 function call's first parameter as an integer.
# echo 1 > kprobes/foo/enable
# cat /etc/passwd > /dev/null
# cat trace
cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
# echo 0 > kprobes/foo/enable
Now if we delete the kprobe and create a new one that reads a string:
# echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events
And now we can the trace:
# cat trace
sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
bash-1515 [007] ..... 534.299093: foo: (do_sys_openat2+0x0/0x240) arg1="kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk���������@��4Z����;Y�����U
And dmesg has:
==================================================================
BUG: KASAN: use-after-free in string+0xd4/0x1c0
Read of size 1 at addr ffff88805fdbbfa0 by task cat/2049
CPU: 0 PID: 2049 Comm: cat Not tainted 6.1.0-rc6-test+ #641
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x77
print_report+0x17f/0x47b
kasan_report+0xad/0x130
string+0xd4/0x1c0
vsnprintf+0x500/0x840
seq_buf_vprintf+0x62/0xc0
trace_seq_printf+0x10e/0x1e0
print_type_string+0x90/0xa0
print_kprobe_event+0x16b/0x290
print_trace_line+0x451/0x8e0
s_show+0x72/0x1f0
seq_read_iter+0x58e/0x750
seq_read+0x115/0x160
vfs_read+0x11d/0x460
ksys_read+0xa9/0x130
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc2e972ade2
Code: c0 e9 b2 fe ff ff 50 48 8d 3d b2 3f 0a 00 e8 05 f0 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
RSP: 002b:00007ffc64e687c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2e972ade2
RDX: 0000000000020000 RSI: 00007fc2e980d000 RDI: 0000000000000003
RBP: 00007fc2e980d000 R08: 00007fc2e980c010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020f00
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
The buggy address belongs to the physical page:
page:ffffea00017f6ec0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5fdbb
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea00017f6ec8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88805fdbbe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88805fdbbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88805fdbbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88805fdbc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88805fdbc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
This was found when Zheng Yejian sent a patch to convert the event type
number assignment to use IDA, which gives the next available number, and
this bug showed up in the fuzz testing by Yujie Liu and the kernel test
robot. But after further analysis, I found that this behavior is the same
as when the event type numbers go past the 16bit max (and the above shows
that).
As modules have a similar issue, but is dealt with by setting a
"WAS_ENABLED" flag when a module event is enabled, and when the module is
freed, if any of its events were enabled, the ring buffer that holds that
event is also cleared, to prevent reading stale events. The same can be
done for dynamic events.
If any dynamic event that is being removed was enabled, then make sure the
buffers they were enabled in are now cleared.
Link: https://lkml.kernel.org/r/20221123171434.545706e3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110020319.1259291-1-zhengyejian1@huawei.com/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Depends-on: e18eb8783e ("tracing: Add tracing_reset_all_online_cpus_unlocked() function")
Depends-on: 5448d44c38 ("tracing: Add unified dynamic event framework")
Depends-on: 6212dd2968 ("tracing/kprobes: Use dyn_event framework for kprobe events")
Depends-on: 065e63f951 ("tracing: Only have rmmod clear buffers that its events were active in")
Depends-on: 575380da8b ("tracing: Only clear trace buffer on module unload if event was traced")
Fixes: 77b44d1b7c ("tracing/kprobes: Rename Kprobe-tracer to kprobe-event")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the tracing_reset_all_online_cpus() requires the
trace_types_lock held. But only one caller of this function actually has
that lock held before calling it, and the other just takes the lock so
that it can call it. More users of this function is needed where the lock
is not held.
Add a tracing_reset_all_online_cpus_unlocked() function for the one use
case that calls it without being held, and also add a lockdep_assert to
make sure it is held when called.
Then have tracing_reset_all_online_cpus() take the lock internally, such
that callers do not need to worry about taking it.
Link: https://lkml.kernel.org/r/20221123192741.658273220@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 94eedf3dde ("tracing: Fix race where eprobes can be called before
the event") fixed an issue where if an event is soft disabled, and the
trigger is being added, there's a small window where the event sees that
there's a trigger but does not see that it requires reading the event yet,
and then calls the trigger with the record == NULL.
This could be solved with adding memory barriers in the hot path, or to
make sure that all the triggers requiring a record check for NULL. The
latter was chosen.
Commit 94eedf3dde set the eprobe trigger handle to check for NULL, but
the same needs to be done with histograms.
Link: https://lore.kernel.org/linux-trace-kernel/20221118211809.701d40c0f8a757b0df3c025a@kernel.org/
Link: https://lore.kernel.org/linux-trace-kernel/20221123164323.03450c3a@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Syzkaller managed to hit another decl_tag issue:
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
This seems similar to commit ea68376c8b ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument.
Reported-by: syzbot+8dd0551dda6020944c5d@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221123035422.872531-2-sdf@google.com
In commit fda01efc61 ("bpf: Enable cgroups to be used as kptrs"), I
added an 'int idx' variable to kfunc_init() which was meant to
dynamically set the index of the btf id entries of the
'generic_dtor_ids' array. This was done to make the code slightly less
brittle as the struct cgroup * kptr kfuncs such as bpf_cgroup_aquire()
are compiled out if CONFIG_CGROUPS is not defined. This, however, causes
an lkp build warning:
>> kernel/bpf/helpers.c:2005:40: warning: multiple unsequenced
modifications to 'idx' [-Wunsequenced]
.btf_id = generic_dtor_ids[idx++],
Fix the warning by just hard-coding the indices.
Fixes: fda01efc61 ("bpf: Enable cgroups to be used as kptrs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221123135253.637525-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/all/20221117214249.2addbe10@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The duration type is a 64 long value, not an int. This was
causing some long noise to report wrong values.
Change the duration to a 64 bits value.
Link: https://lkml.kernel.org/r/a93d8a8378c7973e9c609de05826533c9e977939.1668692096.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: bce29ac9ce ("trace: Add osnoise tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Before current_user_event_group(), it has allocated memory and save it
in @name, this should freed before return error.
Link: https://lkml.kernel.org/r/20221115014445.158419-1-xiujianfeng@huawei.com
Fixes: e5d271812e ("tracing/user_events: Move pages/locks into groups to prepare for namespaces")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
struct cgroup * objects have a variably sized struct cgroup *ancestors[]
field which stores pointers to their ancestor cgroups. If using a cgroup
as a kptr, it can be useful to access these ancestors, but doing so
requires variable offset accesses for PTR_TO_BTF_ID, which is currently
unsupported.
This is a very useful field to access for cgroup kptrs, as programs may
wish to walk their ancestor cgroups when determining e.g. their
proportional cpu.weight. So as to enable this functionality with cgroup
kptrs before var_off is supported for PTR_TO_BTF_ID, this patch adds a
bpf_cgroup_ancestor() kfunc which accesses the cgroup node on behalf of
the caller, and acquires a reference on it. Once var_off is supported
for PTR_TO_BTF_ID, and fields inside a struct can be marked as trusted
so they retain the PTR_TRUSTED modifier when walked, this can be
removed.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that tasks can be used as kfuncs, and the PTR_TRUSTED flag is
available for us to easily add basic acquire / get / release kfuncs, we
can do the same for cgroups. This patch set adds the following kfuncs
which enable using cgroups as kptrs:
struct cgroup *bpf_cgroup_acquire(struct cgroup *cgrp);
struct cgroup *bpf_cgroup_kptr_get(struct cgroup **cgrpp);
void bpf_cgroup_release(struct cgroup *cgrp);
A follow-on patch will add a selftest suite which validates these
kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122055458.173143-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are a couple of missing * in comment blocks. Fix these.
Cleans up two clang warnings:
kernel/trace/trace_events_hist.c:986: warning: bad line:
kernel/trace/trace_events_hist.c:3229: warning: bad line:
Link: https://lkml.kernel.org/r/20221020133019.1547587-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Change the function argument in the description of cpuset_css_alloc()
from 'struct cgroup' -> 'struct cgroup_subsys_state'. The change to the
argument type was introduced by commit eb95419b02 ("cgroup: pass
around cgroup_subsys_state instead of cgroup in subsystem methods").
Also, add more information to its description.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 6d5afdc97e.
On a Pixel 6 device, it is observed that this commit increases
latency by approximately 50ms, or 20%, in migrating a task
that requires full CPU utilization from a LITTLE CPU to Fmax
on a big CPU. Reverting this change restores the latency back
to its original baseline value.
Fixes: 6d5afdc97e ("cpufreq: schedutil: Move max CPU capacity to sugov_policy")
Signed-off-by: Sam Wu <wusamuel@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The filter() callback in struct kset_uevent_ops does not modify the
kobject passed into it, so make the pointer const to enforce this
restriction. When doing so, fix up all existing filter() callbacks to
have the correct signature to preserve the build.
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com> for the changes to
Link: https://lore.kernel.org/r/20221121094649.1556002-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:
# upstream:
debc5a1ec0 ("KVM: x86: use a separate asm-offsets.c file")
# retbleed work in x86/core:
5d8213864a ("x86/retbleed: Add SKL return thunk")
... and these commits in include/linux/bpf.h:
# upstram:
18acb7fac2 ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")
# x86/core commits:
931ab63664 ("x86/ibt: Implement FineIBT")
bea75b3389 ("x86/Kconfig: Introduce function padding")
The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.
Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
bpf_selem_alloc function is used by inode_storage, sk_storage and
task_storage maps to set map value, for these map types, there may
be a spin lock in the map value, so if we use memcpy to copy the whole
map value from user, the spin lock field may be initialized incorrectly.
Since the spin lock field is zeroed by kzalloc, call copy_map_value
instead of memcpy to skip copying the spin lock field to fix it.
Fixes: 6ac99e8f23 ("bpf: Introduce bpf sk local storage")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20221114134720.1057939-2-xukuohai@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_iter_attach_cgroup() has already acquired an extra reference for the
start cgroup, but the reference may be released if the iterator link fd
is closed after the creation of iterator fd, and it may lead to
user-after-free problem when reading the iterator fd.
An alternative fix is pinning iterator link when opening iterator,
but it will make iterator link being still visible after the close of
iterator link fd and the behavior is different with other link types, so
just fixing it by acquiring another reference for the start cgroup.
Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-2-houtao@huaweicloud.com
Most allocation sites in the kernel want an explicitly sized allocation
(and not "more"), and that dynamic runtime analysis tools (e.g. KASAN,
UBSAN_BOUNDS, FORTIFY_SOURCE, etc) are looking for precise bounds checking
(i.e. not something that is rounded up). A tiny handful of allocations
were doing an implicit alloc/realloc loop that actually depended on
ksize(), and didn't actually always call realloc. This has created a
long series of bugs and problems over many years related to the runtime
bounds checking, so these callers are finally being adjusted to _not_
depend on the ksize() side-effect, by doing one of several things:
- tracking the allocation size precisely and just never calling ksize()
at all [1].
- always calling realloc and not using ksize() at all. (This solution
ends up actually be a subset of the next solution.)
- using kmalloc_size_roundup() to explicitly round up the desired
allocation size immediately [2].
The bpf/verifier case is this another of this latter case, and is the
last outstanding case to be fixed in the kernel.
Because some of the dynamic bounds checking depends on the size being an
_argument_ to an allocator function (i.e. see the __alloc_size attribute),
the ksize() users are rare, and it could waste local variables, it
was been deemed better to explicitly separate the rounding up from the
allocation itself [3].
Round up allocations with kmalloc_size_roundup() so that the verifier's
use of ksize() is always accurate.
[1] e.g.:
https://git.kernel.org/linus/712f210a457dhttps://git.kernel.org/linus/72c08d9f4c72
[2] e.g.:
https://git.kernel.org/netdev/net-next/c/12d6c1d3a2adhttps://git.kernel.org/netdev/net-next/c/ab3f7828c979https://git.kernel.org/netdev/net-next/c/d6dd508080a3
[3] https://lore.kernel.org/lkml/0ea1fc165a6c6117f982f4f135093e69cb884930.camel@redhat.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221118183409.give.387-kees@kernel.org
DMA allocations can never be turned back into a page pointer, so
requesting compound pages doesn't make sense and it can't even be
supported at all by various backends.
Reject __GFP_COMP with a warning in dma_alloc_attrs, and stop clearing
the flag in the arm dma ops and dma-iommu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
The sysctl_numa_balancing_promote_rate_limit and sysctl_numa_balancing
are part of sched, move them to its own file.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Implement bpf_rdonly_cast() which tries to cast the object
to a specified type. This tries to support use case like below:
#define skb_shinfo(SKB) ((struct skb_shared_info *)(skb_end_pointer(SKB)))
where skb_end_pointer(SKB) is a 'unsigned char *' and needs to
be casted to 'struct skb_shared_info *'.
The signature of bpf_rdonly_cast() looks like
void *bpf_rdonly_cast(void *obj, __u32 btf_id)
The function returns the same 'obj' but with PTR_TO_BTF_ID with
btf_id. The verifier will ensure btf_id being a struct type.
Since the supported type cast may not reflect what the 'obj'
represents, the returned btf_id is marked as PTR_UNTRUSTED, so
the return value and subsequent pointer chasing cannot be
used as helper/kfunc arguments.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195437.3114585-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement bpf_cast_to_kern_ctx() kfunc which does a type cast
of a uapi ctx object to the corresponding kernel ctx. Previously
if users want to access some data available in kctx but not
in uapi ctx, bpf_probe_read_kernel() helper is needed.
The introduction of bpf_cast_to_kern_ctx() allows direct
memory access which makes code simpler and easier to understand.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195432.3113982-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Later on, we will introduce kfuncs bpf_cast_to_kern_ctx() and
bpf_rdonly_cast() which apply to all program types. Currently kfunc set
only supports individual prog types. This patch added support for kfunc
applying to all program types.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195426.3113828-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the unlikely event that bpf_global_ma is not correctly initialized,
instead of checking the boolean everytime bpf_obj_new_impl is called,
simply check it while loading the program and return an error if
bpf_global_ma_set is false.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221120212610.2361700-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix possible NULL pointer dereference on trace_event_file in kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
which can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the fields
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY3qRDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgCdAP0cB1ZjmMM7O8OFdnrTV0jfavZTnNNC
ut9sczpYQ0upcwEArmVvB+H3sTM6Y7PrsQEUn8gsc7WmieUoDAOr0hIe4AI=
=DGVC
-----END PGP SIGNATURE-----
Merge tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and then
the read blocks.
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not.
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order instead of
diving it by 2
- Static analyzer found a case were a pointer being used outside of a NULL
check. (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path.
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event setup
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY3qNNBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiVzAP9vdtLkseOueVqPJ/Wc6v3z0xlkxO4L
Aj9jOac822SPOQEAvUJ1DM1bxm/D2BY5AQsfgSGjdaVYP+I3kvETNgWspQI=
=3ta3
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221117214249.2addbe10@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or unknown
rseq ABI flags in order to be able to fuzz the rseq() syscall with
syzkaller
-----BEGIN PGP SIGNATURE-----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=I+nD
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
-----BEGIN PGP SIGNATURE-----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=9ZHJ
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
Now that BPF supports adding new kernel functions with kfuncs, and
storing kernel objects in maps with kptrs, we can add a set of kfuncs
which allow struct task_struct objects to be stored in maps as
referenced kptrs. The possible use cases for doing this are plentiful.
During tracing, for example, it would be useful to be able to collect
some tasks that performed a certain operation, and then periodically
summarize who they are, which cgroup they're in, how much CPU time
they've utilized, etc.
In order to enable this, this patch adds three new kfuncs:
struct task_struct *bpf_task_acquire(struct task_struct *p);
struct task_struct *bpf_task_kptr_get(struct task_struct **pp);
void bpf_task_release(struct task_struct *p);
A follow-on patch will add selftests validating these kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.
The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.
There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:
SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;
nested = task->last_wakee;
/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;
bpf_task_release(acquired);
return 0;
}
To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.
A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reg_type_str() in the verifier currently only allows a single register
type modifier to be present in the 'prefix' string which is eventually
stored in the env type_str_buf. This currently works fine because there
are no overlapping type modifiers, but once PTR_TRUSTED is added, that
will no longer be the case. This patch updates reg_type_str() to support
having multiple modifiers in the prefix string, and updates the size of
type_str_buf to be 128 bytes.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
task_numa_work. x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).
No functional change intended.
Link: https://lkml.kernel.org/r/20220822173956.82525-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have struct range, so just use it.
Link: https://lkml.kernel.org/r/20220929042936.22012-4-bhe@redhat.com
Signed-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Return the value kimage_add_entry() directly instead of storing it in
another redundant variable.
Link: https://lkml.kernel.org/r/20220929042936.22012-3-bhe@redhat.com
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Li Chen <lchen@ambarella.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly necessary
in the core ftrace code.
This patch adds new ftrace_regs_{get,set}_*() helpers which can be used
to manipulate ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y,
these can always be used on any ftrace_regs, and when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n these can be used when regs are
available. A new ftrace_regs_has_args(fregs) helper is added which code
can use to check when these are usable.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll add a sew of ftrace_regs_{get,set}_*()
helpers. In preparation, this patch renames
ftrace_instruction_pointer_set() to
ftrace_regs_set_instruction_pointer().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly
necessary in the core ftrace code.
This patch changes the prototype of arch_ftrace_set_direct_caller() to
take ftrace_regs rather than pt_regs, and moves the extraction of the
pt_regs into arch_ftrace_set_direct_caller().
On x86, arch_ftrace_set_direct_caller() can be used even when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n, and <linux/ftrace.h> defines
struct ftrace_regs. Due to this, it's necessary to define
arch_ftrace_set_direct_caller() as a macro to avoid using an incomplete
type. I've also moved the body of arch_ftrace_set_direct_caller() after
the CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y defineidion of struct
ftrace_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some architectures (powerpc) may not support ftrace locations being nop'ed
out at build time. Introduce CONFIG_HAVE_OBJTOOL_NOP_MCOUNT for objtool, as
a means for architectures to enable nop'ing of ftrace locations. Add --mnop
as an option to objtool --mcount, to indicate support for the same.
Also, make sure that --mnop can be passed as an option to objtool only when
--mcount is passed.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-12-sv@linux.ibm.com
The old behavior of bpf_map_meta_equal was that it compared timer_off
to be equal (but not spin_lock_off, because that was not allowed), and
did memcmp of kptr_off_tab.
Now, we memcmp the btf_record of two bpf_map structs, which has all
fields.
We preserve backwards compat as we kzalloc the array, so if only spin
lock and timer exist in map, we only compare offset while the rest of
unused members in the btf_field struct are zeroed out.
In case of kptr, btf and everything else is of vmlinux or module, so as
long type is same it will match, since kernel btf, module, dtor pointer
will be same across maps.
Now with list_head in the mix, things are a bit complicated. We
implicitly add a requirement that both BTFs are same, because struct
btf_field_list_head has btf and value_rec members.
We obviously shouldn't force BTFs to be equal by default, as that breaks
backwards compatibility.
Currently it is only implicitly required due to list_head matching
struct btf and value_rec member. value_rec points back into a btf_record
stashed in the map BTF (btf member of btf_field_list_head). So that
pointer and btf member has to match exactly.
Document all these subtle details so that things don't break in the
future when touching this code.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-19-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit implements the delayed release logic for bpf_list_push_front
and bpf_list_push_back.
Once a node has been added to the list, it's pointer changes to
PTR_UNTRUSTED. However, it is only released once the lock protecting the
list is unlocked. For such PTR_TO_BTF_ID | MEM_ALLOC with PTR_UNTRUSTED
set but an active ref_obj_id, it is still permitted to read them as long
as the lock is held. Writing to them is not allowed.
This allows having read access to push items we no longer own until we
release the lock guarding the list, allowing a little more flexibility
when working with these APIs.
Note that enabling write support has fairly tricky interactions with
what happens inside the critical section. Just as an example, currently,
bpf_obj_drop is not permitted, but if it were, being able to write to
the PTR_UNTRUSTED pointer while the object gets released back to the
memory allocator would violate safety properties we wish to guarantee
(i.e. not crashing the kernel). The memory could be reused for a
different type in the BPF program or even in the kernel as it gets
eventually kfree'd.
Not enabling bpf_obj_drop inside the critical section would appear to
prevent all of the above, but that is more of an artifical limitation
right now. Since the write support is tangled with how we handle
potential aliasing of nodes inside the critical section that may or may
not be part of the list anymore, it has been deferred to a future patch.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-18-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a linked list API for use in BPF programs, where it expects
protection from the bpf_spin_lock in the same allocation as the
bpf_list_head. For now, only one bpf_spin_lock can be present hence that
is assumed to be the one protecting the bpf_list_head.
The following functions are added to kick things off:
// Add node to beginning of list
void bpf_list_push_front(struct bpf_list_head *head, struct bpf_list_node *node);
// Add node to end of list
void bpf_list_push_back(struct bpf_list_head *head, struct bpf_list_node *node);
// Remove node at beginning of list and return it
struct bpf_list_node *bpf_list_pop_front(struct bpf_list_head *head);
// Remove node at end of list and return it
struct bpf_list_node *bpf_list_pop_back(struct bpf_list_head *head);
The lock protecting the bpf_list_head needs to be taken for all
operations. The verifier ensures that the lock that needs to be taken is
always held, and only the correct lock is taken for these operations.
These checks are made statically by relying on the reg->id preserved for
registers pointing into regions having both bpf_spin_lock and the
objects protected by it. The comment over check_reg_allocation_locked in
this change describes the logic in detail.
Note that bpf_list_push_front and bpf_list_push_back are meant to
consume the object containing the node in the 1st argument, however that
specific mechanism is intended to not release the ref_obj_id directly
until the bpf_spin_unlock is called. In this commit, nothing is done,
but the next commit will be introducing logic to handle this case, so it
has been left as is for now.
bpf_list_pop_front and bpf_list_pop_back delete the first or last item
of the list respectively, and return pointer to the element at the
list_node offset. The user can then use container_of style macro to get
the actual entry type. The verifier however statically knows the actual
type, so the safety properties are still preserved.
With these additions, programs can now manage their own linked lists and
store their objects in them.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-17-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pointer increment on seeing PTR_MAYBE_NULL is already protected against,
hence make an exception for PTR_TO_BTF_ID | MEM_ALLOC while still
keeping the warning for other unintended cases that might creep in.
bpf_list_pop_{front,_back} helpers planned to be introduced in next
commit will return a MEM_ALLOC register with incremented offset pointing
to bpf_list_node field. The user is supposed to then obtain the pointer
to the entry using container_of after NULL checking it. The current
restrictions trigger a warning when doing the NULL checking. Revisiting
the reason, it is meant as an assertion which seems to actually work and
catch the bad case.
Hence, under no other circumstances can reg->off be non-zero for a
register that has the PTR_MAYBE_NULL type flag set.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-16-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_obj_drop, which is the kfunc used to free allocated
objects (allocated using bpf_obj_new). Pairing with bpf_obj_new, it
implicitly destructs the fields part of object automatically without
user intervention.
Just like the previous patch, btf_struct_meta that is needed to free up
the special fields is passed as a hidden argument to the kfunc.
For the user, a convenience macro hides over the kernel side kfunc which
is named bpf_obj_drop_impl.
Continuing the previous example:
void prog(void) {
struct foo *f;
f = bpf_obj_new(typeof(*f));
if (!f)
return;
bpf_obj_drop(f);
}
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-15-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce type safe memory allocator bpf_obj_new for BPF programs. The
kernel side kfunc is named bpf_obj_new_impl, as passing hidden arguments
to kfuncs still requires having them in prototype, unlike BPF helpers
which always take 5 arguments and have them checked using bpf_func_proto
in verifier, ignoring unset argument types.
Introduce __ign suffix to ignore a specific kfunc argument during type
checks, then use this to introduce support for passing type metadata to
the bpf_obj_new_impl kfunc.
The user passes BTF ID of the type it wants to allocates in program BTF,
the verifier then rewrites the first argument as the size of this type,
after performing some sanity checks (to ensure it exists and it is a
struct type).
The second argument is also fixed up and passed by the verifier. This is
the btf_struct_meta for the type being allocated. It would be needed
mostly for the offset array which is required for zero initializing
special fields while leaving the rest of storage in unitialized state.
It would also be needed in the next patch to perform proper destruction
of the object's special fields.
Under the hood, bpf_obj_new will call bpf_mem_alloc and bpf_mem_free,
using the any context BPF memory allocator introduced recently. To this
end, a global instance of the BPF memory allocator is initialized on
boot to be used for this purpose. This 'bpf_global_ma' serves all
allocations for bpf_obj_new. In the future, bpf_obj_new variants will
allow specifying a custom allocator.
Note that now that bpf_obj_new can be used to allocate objects that can
be linked to BPF linked list (when future linked list helpers are
available), we need to also free the elements using bpf_mem_free.
However, since the draining of elements is done outside the
bpf_spin_lock, we need to do migrate_disable around the call since
bpf_list_head_free can be called from map free path where migration is
enabled. Otherwise, when called from BPF programs migration is already
disabled.
A convenience macro is included in the bpf_experimental.h header to hide
over the ugly details of the implementation, leading to user code
looking similar to a language level extension which allocates and
constructs fields of a user type.
struct bar {
struct bpf_list_node node;
};
struct foo {
struct bpf_spin_lock lock;
struct bpf_list_head head __contains(bar, node);
};
void prog(void) {
struct foo *f;
f = bpf_obj_new(typeof(*f));
if (!f)
return;
...
}
A key piece of this story is still missing, i.e. the free function,
which will come in the next patch.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-14-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow passing known constant scalars as arguments to kfuncs that do not
represent a size parameter. We use mark_chain_precision for the constant
scalar argument to mark it precise. This makes the search pruning
optimization of verifier more conservative for such kfunc calls, and
each non-distinct argument is considered unequivalent.
We will use this support to then expose a bpf_obj_new function where it
takes the local type ID of a type in program BTF, and returns a
PTR_TO_BTF_ID | MEM_ALLOC to the local type, and allows programs to
allocate their own objects.
Each type ID resolves to a distinct type with a possibly distinct size,
hence the type ID constant matters in terms of program safety and its
precision needs to be checked between old and cur states inside regsafe.
The use of mark_chain_precision enables this.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-13-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As we continue to add more features, argument types, kfunc flags, and
different extensions to kfuncs, the code to verify the correctness of
the kfunc prototype wrt the passed in registers has become ad-hoc and
ugly to read. To make life easier, and make a very clear split between
different stages of argument processing, move all the code into
verifier.c and refactor into easier to read helpers and functions.
This also makes sharing code within the verifier easier with kfunc
argument processing. This will be more and more useful in later patches
as we are now moving to implement very core BPF helpers as kfuncs, to
keep them experimental before baking into UAPI.
Remove all kfunc related bits now from btf_check_func_arg_match, as
users have been converted away to refactored kfunc argument handling.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no need to restrict users from locking bpf_spin_lock in map
values of inner maps. Each inner map lookup gets a unique reg->id
assigned to the returned PTR_TO_MAP_VALUE which will be preserved after
the NULL check. Distinct lookups into different inner map get unique
IDs, and distinct lookups into same inner map also get unique IDs.
Hence, lift the restriction by removing the check return -ENOTSUPP in
map_in_map.c. Later commits will add comprehensive test cases to ensure
that invalid cases are rejected.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-11-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Global variables reside in maps accessible using direct_value_addr
callbacks, so giving each load instruction's rewrite a unique reg->id
disallows us from holding locks which are global.
The reason for preserving reg->id as a unique value for registers that
may point to spin lock is that two separate lookups are treated as two
separate memory regions, and any possible aliasing is ignored for the
purposes of spin lock correctness.
This is not great especially for the global variable case, which are
served from maps that have max_entries == 1, i.e. they always lead to
map values pointing into the same map value.
So refactor the active_spin_lock into a 'active_lock' structure which
represents the lock identity, and instead of the reg->id, remember two
fields, a pointer and the reg->id. The pointer will store reg->map_ptr
or reg->btf. It's only necessary to distinguish for the id == 0 case of
global variables, but always setting the pointer to a non-NULL value and
using the pointer to check whether the lock is held simplifies code in
the verifier.
This is generic enough to allow it for global variables, map lookups,
and allocated objects at the same time.
Note that while whether a lock is held can be answered by just comparing
active_lock.ptr to NULL, to determine whether the register is pointing
to the same held lock requires comparing _both_ ptr and id.
Finally, as a result of this refactoring, pseudo load instructions are
not given a unique reg->id, as they are doing lookup for the same map
value (max_entries is never greater than 1).
Essentially, we consider that the tuple of (ptr, id) will always be
unique for any kind of argument to bpf_spin_{lock,unlock}.
Note that this can be extended in the future to also remember offset
used for locking, so that we can introduce multiple bpf_spin_lock fields
in the same allocation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow locking a bpf_spin_lock in an allocated object, in addition to
already supported map value pointers. The handling is similar to that of
map values, by just preserving the reg->id of PTR_TO_BTF_ID | MEM_ALLOC
as well, and adjusting process_spin_lock to work with them and remember
the id in verifier state.
Refactor the existing process_spin_lock to work with PTR_TO_BTF_ID |
MEM_ALLOC in addition to PTR_TO_MAP_VALUE. We need to update the
reg_may_point_to_spin_lock which is used in mark_ptr_or_null_reg to
preserve reg->id, that will be used in env->cur_state->active_spin_lock
to remember the currently held spin lock.
Also update the comment describing bpf_spin_lock implementation details
to also talk about PTR_TO_BTF_ID | MEM_ALLOC type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-9-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that there can be no ownership cycles among different types by
way of having owning objects that can hold some other type as their
element. For instance, a map value can only hold allocated objects, but
these are allowed to have another bpf_list_head. To prevent unbounded
recursion while freeing resources, elements of bpf_list_head in local
kptrs can never have a bpf_list_head which are part of list in a map
value. Later patches will verify this by having dedicated BTF selftests.
Also, to make runtime destruction easier, once btf_struct_metas is fully
populated, we can stash the metadata of the value type directly in the
metadata of the list_head fields, as that allows easier access to the
value type's layout to destruct it at runtime from the btf_field entry
of the list head itself.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow specifying bpf_spin_lock, bpf_list_head, bpf_list_node fields in a
allocated object.
Also update btf_struct_access to reject direct access to these special
fields.
A bpf_list_head allows implementing map-in-map style use cases, where an
allocated object with bpf_list_head is linked into a list in a map
value. This would require embedding a bpf_list_node, support for which
is also included. The bpf_spin_lock is used to protect the bpf_list_head
and other data.
While we strictly don't require to hold a bpf_spin_lock while touching
the bpf_list_head in such objects, as when have access to it, we have
complete ownership of the object, the locking constraint is still kept
and may be conditionally lifted in the future.
Note that the specification of such types can be done just like map
values, e.g.:
struct bar {
struct bpf_list_node node;
};
struct foo {
struct bpf_spin_lock lock;
struct bpf_list_head head __contains(bar, node);
struct bpf_list_node node;
};
struct map_value {
struct bpf_spin_lock lock;
struct bpf_list_head head __contains(foo, node);
};
To recognize such types in user BTF, we build a btf_struct_metas array
of metadata items corresponding to each BTF ID. This is done once during
the btf_parse stage to avoid having to do it each time during the
verification process's requirement to inspect the metadata.
Moreover, the computed metadata needs to be passed to some helpers in
future patches which requires allocating them and storing them in the
BTF that is pinned by the program itself, so that valid access can be
assumed to such data during program runtime.
A key thing to note is that once a btf_struct_meta is available for a
type, both the btf_record and btf_field_offs should be available. It is
critical that btf_field_offs is available in case special fields are
present, as we extensively rely on special fields being zeroed out in
map values and allocated objects in later patches. The code ensures that
by bailing out in case of errors and ensuring both are available
together. If the record is not available, the special fields won't be
recognized, so not having both is also fine (in terms of being a
verification error and not a runtime bug).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce support for representing pointers to objects allocated by the
BPF program, i.e. PTR_TO_BTF_ID that point to a type in program BTF.
This is indicated by the presence of MEM_ALLOC type flag in reg->type to
avoid having to check btf_is_kernel when trying to match argument types
in helpers.
Whenever walking such types, any pointers being walked will always yield
a SCALAR instead of pointer. In the future we might permit kptr inside
such allocated objects (either kernel or program allocated), and it will
then form a PTR_TO_BTF_ID of the respective type.
For now, such allocated objects will always be referenced in verifier
context, hence ref_obj_id == 0 for them is a bug. It is allowed to write
to such objects, as long fields that are special are not touched
(support for which will be added in subsequent patches). Note that once
such a pointer is marked PTR_UNTRUSTED, it is no longer allowed to write
to it.
No PROBE_MEM handling is therefore done for loads into this type unless
PTR_UNTRUSTED is part of the register type, since they can never be in
an undefined state, and their lifetime will always be valid.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Far too much code simply assumes that both btf_record and btf_field_offs
are set to valid pointers together, or both are unset. They go together
hand in hand as btf_record describes the special fields and
btf_field_offs is compact representation for runtime copying/zeroing.
It is very difficult to make this clear in the code when the only
exception to this universal invariant is inner_map_meta which is used
as reg->map_ptr in the verifier. This is simply a bug waiting to happen,
as in verifier context we cannot easily distinguish if PTR_TO_MAP_VALUE
is coming from an inner map, and if we ever end up using field_offs for
any reason in the future, we will silently ignore the special fields for
inner map case (as NULL is not an error but unset field_offs).
Hence, simply copy field_offs from inner map together with btf_record.
While at it, refactor code to unwind properly on errors with gotos.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Whenever btf_record_dup fails, we must free inner_map_meta that was
allocated before.
This fixes a memory leak (in case of errors) during inner map creation.
Fixes: aa3496accc ("bpf: Refactor kptr_off_tab into btf_record")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the commit being fixed, we now miss freeing btf_record for local
storage maps which will have a btf_record populated in case they have
bpf_spin_lock element.
This was missed because I made the choice of offloading the job to free
kptr_off_tab (now btf_record) to the map_free callback when adding
support for kptrs.
Revisiting the reason for this decision, there is the possibility that
the btf_record gets used inside map_free callback (e.g. in case of maps
embedding kptrs) to iterate over them and free them, hence doing it
before the map_free callback would be leaking special field memory, and
do invalid memory access. The btf_record keeps module references which
is critical to ensure the dtor call made for referenced kptr is safe to
do.
If doing it after map_free callback, the map area is already freed, so
we cannot access bpf_map structure anymore.
To fix this and prevent such lapses in future, move bpf_map_free_record
out of the map_free callback, and do it after map_free by remembering
the btf_record pointer. There is no need to access bpf_map structure in
that case, and we can avoid missing this case when support for new map
types is added for other special fields.
Since a btf_record and its btf_field_offs are used together, for
consistency delay freeing of field_offs as well. While not a problem
right now, a lot of code assumes that either both record and field_offs
are set or none at once.
Note that in case of map of maps (outer maps), inner_map_meta->record is
only used during verification, not to free fields in map value, hence we
simply keep the bpf_map_free_record call as is in bpf_map_meta_free and
never touch map->inner_map_meta in bpf_map_free_deferred.
Add a comment making note of these details.
Fixes: db55911782 ("bpf: Consolidate spin_lock, timer management into btf_record")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of returning directly with -EOPNOTSUPP for the timer case, we
need to free the btf_record before returning to userspace.
Fixes: db55911782 ("bpf: Consolidate spin_lock, timer management into btf_record")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221118015614.2013203-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Entries in list 'tr->err_log' will be reused after entry number
exceed TRACING_LOG_ERRS_MAX.
The cmd string of the to be reused entry will be freed first then
allocated a new one. If the allocation failed, then the entry will
still be in list 'tr->err_log' but its 'cmd' field is set to be NULL,
later access of 'cmd' is risky.
Currently above problem can cause the loss of 'cmd' information of first
entry in 'tr->err_log'. When execute `cat /sys/kernel/tracing/error_log`,
reproduce logs like:
[ 37.495100] trace_kprobe: error: Maxactive is not for kprobe(null) ^
[ 38.412517] trace_kprobe: error: Maxactive is not for kprobe
Command: p4:myprobe2 do_sys_openat2
^
Link: https://lore.kernel.org/linux-trace-kernel/20221114104632.3547266-1-zhengyejian1@huawei.com
Fixes: 1581a884b7 ("tracing: Remove size restriction on tracing_log_err cmd strings")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This has nothing to do with random.c and everything to do with stack
protectors. Yes, it uses randomness. But many things use randomness.
random.h and random.c are concerned with the generation of randomness,
not with each and every use. So move this function into the more
specific stackprotector.h file where it belongs.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
These cases were done with this Coccinelle:
@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- + E
- - E
)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- - E
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- - E
+ F
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- + E
+ F
- - E
)
And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since the eprobe filter was defined based on the eprobe's trace event
itself, it doesn't work correctly. Use the original trace event of
the eprobe when making the filter so that the filter works correctly.
Without this fix:
# echo 'e syscalls/sys_enter_openat \
flags_rename=$flags:u32 if flags < 1000' >> dynamic_events
# echo 1 > events/eprobes/sys_enter_openat/enable
[ 114.551550] event trace: Could not enable event sys_enter_openat
-bash: echo: write error: Invalid argument
With this fix:
# echo 'e syscalls/sys_enter_openat \
flags_rename=$flags:u32 if flags < 1000' >> dynamic_events
# echo 1 > events/eprobes/sys_enter_openat/enable
# tail trace
cat-241 [000] ...1. 266.498449: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0
cat-242 [000] ...1. 266.977640: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0
Link: https://lore.kernel.org/all/166823166395.1385292.8931770640212414483.stgit@devnote3/
Fixes: 752be5c5c9 ("tracing/eprobe: Add eprobe filter support")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Tested-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly.
Link: https://lore.kernel.org/all/20221112070000.35299-1-lihuafei1@huawei.com/
Fixes: 0bc11ed5ab ("kprobes: Allow kprobes coexist with livepatch")
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In rethook_alloc(), the variable rh is not freed or passed out
if handler is NULL, which could lead to a memleak, fix it.
Link: https://lore.kernel.org/all/20221110104438.88099-1-yiyang13@huawei.com/
[Masami: Add "rethook:" tag to the title.]
Fixes: 54ecbe6f1e ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Acke-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next}
of @ftrace_mode->list are NULL, it's not a valid state to call list_del().
If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free
tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del()
will write prev->next and next->prev, where null pointer dereference
happens.
BUG: kernel NULL pointer dereference, address: 0000000000000008
Oops: 0002 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
ftrace_mod_callback+0x20d/0x220
? do_filp_open+0xd9/0x140
ftrace_process_regex.isra.51+0xbf/0x130
ftrace_regex_write.isra.52.part.53+0x6e/0x90
vfs_write+0xee/0x3a0
? __audit_filter_op+0xb1/0x100
? auditd_test_task+0x38/0x50
ksys_write+0xa5/0xe0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Kernel panic - not syncing: Fatal exception
So call INIT_LIST_HEAD() to initialize the list member to fix this issue.
Link: https://lkml.kernel.org/r/20221116015207.30858-1-xiujianfeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: 673feb9d76 ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rb_head_page_deactivate() expects cpu_buffer to contain a valid list of
->pages, so verify that the list is actually present before calling it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru
Cc: stable@vger.kernel.org
Fixes: 77ae365eca ("ring-buffer: make lockless")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If we can't allocate this size, try something smaller with half of the
size. Its order should be decreased by one instead of divided by two.
Link: https://lkml.kernel.org/r/20221109094434.84046-3-wangwensheng4@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: a790087554 ("ftrace: Allocate the mcount record pages as groups")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the number of mcount entries is an integer multiple of
ENTRIES_PER_PAGE, the page count showing on the console would be wrong.
Link: https://lkml.kernel.org/r/20221109094434.84046-2-wangwensheng4@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 5821e1b74f ("function tracing: fix wrong pos computing when read buffer has been fulfilled")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The first test of the kcsan selftest appears to test if get_random_u32()
returns two zeros in a row, and requires that it doesn't. This seems
like a bogus criteron. Remove it.
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Currently bpf_map_do_batch() first invokes fdget(batch.map_fd) to get
the target map file, then it invokes generic_map_update_batch() to do
batch update. generic_map_update_batch() will get the target map file
by using fdget(batch.map_fd) again and pass it to bpf_map_update_value().
The problem is map file returned by the second fdget() may be NULL or a
totally different file compared by map file in bpf_map_do_batch(). The
reason is that the first fdget() only guarantees the liveness of struct
file instead of file descriptor and the file description may be released
by concurrent close() through pick_file().
It doesn't incur any problem as for now, because maps with batch update
support don't use map file in .map_fd_get_ptr() ops. But it is better to
fix the potential access of an invalid map file.
Using __bpf_map_get() again in generic_map_update_batch() can not fix
the problem, because batch.map_fd may be closed and reopened, and the
returned map file may be different with map file got in
bpf_map_do_batch(), so just passing the map file directly to
.map_update_batch() in bpf_map_do_batch().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221116075059.1551277-1-houtao@huaweicloud.com
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
Add a bus token member to struct msi_domain_info and let
msi_create_irq_domain() set the bus token.
That allows to remove the bus token updates at the call sites.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.294554462@linutronix.de
Now that the last user is gone, confine it to the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.179595843@linutronix.de
To prepare for removing the exposure of __msi_domain_free_irqs() provide a
post_free() callback in the MSI domain ops which can be used to solve
the problem of the only user of __msi_domain_free_irqs() in arch/powerpc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.063153448@linutronix.de
When a range of descriptors is freed then all of them are not associated to
a linux interrupt. Remove the filter and add a warning to the free function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122013.888850936@linutronix.de
There are no associated MSI descriptors in the requested range when the MSI
descriptor allocation fails. Use MSI_DESC_ALL as the filter which prepares
the next step to get rid of the filter for freeing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122013.831151822@linutronix.de
As noted by Michal, the blkg_iostat_set's in the lockless list
hold reference to blkg's to protect against their removal. Those
blkg's hold reference to blkcg. When a cgroup is being destroyed,
cgroup_rstat_flush() is only called at css_release_work_fn() which is
called when the blkcg reference count reaches 0. This circular dependency
will prevent blkcg from being freed until some other events cause
cgroup_rstat_flush() to be called to flush out the pending blkcg stats.
To prevent this delayed blkcg removal, add a new cgroup_rstat_css_flush()
function to flush stats for a given css and cpu and call it at the blkgs
destruction path, blkcg_destroy_blkgs(), whenever there are still some
pending stats to be flushed. This will ensure that blkcg reference
count can reach 0 ASAP.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-4-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function ring_buffer_nr_dirty_pages() was created to find out how many
pages are filled in the ring buffer. There's two running counters. One is
incremented whenever a new page is touched (pages_touched) and the other
is whenever a page is read (pages_read). The dirty count is the number
touched minus the number read. This is used to determine if a blocked task
should be woken up if the percentage of the ring buffer it is waiting for
is hit.
The problem is that it does not take into account dropped pages (when the
new writes overwrite pages that were not read). And then the dirty pages
will always be greater than the percentage.
This makes the "buffer_percent" file inaccurate, as the number of dirty
pages end up always being larger than the percentage, event when it's not
and this causes user space to be woken up more than it wants to be.
Add a new counter to keep track of lost pages, and include that in the
accounting of dirty pages so that it is actually accurate.
Link: https://lkml.kernel.org/r/20221021123013.55fb6055@gandalf.local.home
Fixes: 2c2b0a78b3 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the way polling works on the ring buffer is broken. It will
return immediately if there's any data in the ring buffer whereas a read
will block until the watermark (defined by the tracefs buffer_percent file)
is hit.
That is, a select() or poll() will return as if there's data available,
but then the following read will block. This is broken for the way
select()s and poll()s are supposed to work.
Have the polling on the ring buffer also block the same way reads and
splice does on the ring buffer.
Link: https://lkml.kernel.org/r/20221020231427.41be3f26@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Primiano Tucci <primiano@google.com>
Cc: stable@vger.kernel.org
Fixes: 1e0d6714ac ("ring-buffer: Do not wake up a splice waiter when page is not full")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation. Return the number of woken
exclusive waiters from __wake_up() to facilitate that.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We found a long tail latency in schbench whem m*t is close to nr_cpus.
(e.g., "schbench -m 2 -t 16" on a machine with 32 cpus.)
This is because when the wakee cpu is idle, rq->ttwu_pending is cleared
too early, and idle_cpu() will return true until the wakee task enqueued.
This will mislead the waker when selecting idle cpu, and wake multiple
worker threads on the same wakee cpu. This situation is enlarged by
commit f3dd3f6745 ("sched: Remove the limitation of WF_ON_CPU on
wakelist if wakee cpu is idle") because it tends to use wakelist.
Here is the result of "schbench -m 2 -t 16" on a VM with 32vcpu
(Intel(R) Xeon(R) Platinum 8369B).
Latency percentiles (usec):
base base+revert_f3dd3f674555 base+this_patch
50.0000th: 9 13 9
75.0000th: 12 19 12
90.0000th: 15 22 15
95.0000th: 18 24 17
*99.0000th: 27 31 24
99.5000th: 3364 33 27
99.9000th: 12560 36 30
We also tested on unixbench and hackbench, and saw no performance
change.
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20221104023601.12844-1-dtcccc@linux.alibaba.com
Propagate nullness information for branches of register to register
equality compare instructions. The following rules are used:
- suppose register A maybe null
- suppose register B is not null
- for JNE A, B, ... - A is not null in the false branch
- for JEQ A, B, ... - A is not null in the true branch
E.g. for program like below:
r6 = skb->sk;
r7 = sk_fullsock(r6);
r0 = sk_fullsock(r6);
if (r0 == 0) return 0; (a)
if (r0 != r7) return 0; (b)
*r7->type; (c)
return 0;
It is safe to dereference r7 at point (c), because of (a) and (b).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221115224859.2452988-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In pmu_dev_alloc(), when dev_set_name() failed, it will goto free_dev
and call put_device(pmu->dev) to release it.
However pmu->dev->release is assigned after this, which makes warning
and memleak.
Call dev_set_name() after pmu->dev->release = pmu_dev_release to fix it.
Device '(null)' does not have a release() function...
WARNING: CPU: 2 PID: 441 at drivers/base/core.c:2332 device_release+0x1b9/0x240
...
Call Trace:
<TASK>
kobject_put+0x17f/0x460
put_device+0x20/0x30
pmu_dev_alloc+0x152/0x400
perf_pmu_register+0x96b/0xee0
...
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff888014759000 (size 2048):
comm "modprobe", pid 441, jiffies 4294931444 (age 38.332s)
backtrace:
[<0000000005aed3b4>] kmalloc_trace+0x27/0x110
[<000000006b38f9b8>] pmu_dev_alloc+0x50/0x400
[<00000000735f17be>] perf_pmu_register+0x96b/0xee0
[<00000000e38477f1>] 0xffffffffc0ad8603
[<000000004e162216>] do_one_initcall+0xd0/0x4e0
...
Fixes: abe4340057 ("perf: Sysfs enumeration")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221111103653.91058-1-chenzhongjin@huawei.com
The find_get_pmu_context() returns an ERR_PTR() on failure, we should use
IS_ERR() to check the return value.
Fixes: bd27568117 ("perf: Rewrite core context handling")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221114091833.1492575-1-cuigaosheng1@huawei.com
The pointer task_ctx is being assigned a value that is not read, the
assignment is redundant and so is the pointer. Remove it
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221028122545.528999-1-colin.i.king@gmail.com
For queueing packets in XDP we want to add a new redirect map type with
support for 64-bit indexes. To prepare fore this, expand the width of the
'key' argument to the bpf_redirect_map() helper. Since BPF registers are
always 64-bit, this should be safe to do after the fact.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221108140601.149971-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit bfea9a8574 ("bpf: Add name to struct bpf_ksym"), when
reporting subprog ksymbol to perf, prog name instead of subprog name is
used. The backtrace of bpf program with subprogs will be incorrect as
shown below:
ffffffffc02deace bpf_prog_e44a3057dcb151f8_overwrite+0x66
ffffffffc02de9f7 bpf_prog_e44a3057dcb151f8_overwrite+0x9f
ffffffffa71d8d4e trace_call_bpf+0xce
ffffffffa71c2938 perf_call_bpf_enter.isra.0+0x48
overwrite is the entry program and it invokes the overwrite_htab subprog
through bpf_loop, but in above backtrace, overwrite program just jumps
inside itself.
Fixing it by using subprog name when reporting subprog ksymbol. After
the fix, the output of perf script will be correct as shown below:
ffffffffc031aad2 bpf_prog_37c0bec7d7c764a4_overwrite_htab+0x66
ffffffffc031a9e7 bpf_prog_c7eb827ef4f23e71_overwrite+0x9f
ffffffffa3dd8d4e trace_call_bpf+0xce
ffffffffa3dc2938 perf_call_bpf_enter.isra.0+0x48
Fixes: bfea9a8574 ("bpf: Add name to struct bpf_ksym")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20221114095733.158588-1-houtao@huaweicloud.com
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Instead of having to pass multiple arguments that describe the register,
pass the bpf_reg_state into the btf_struct_access callback. Currently,
all call sites simply reuse the btf and btf_id of the reg they want to
check the access of. The only exception to this pattern is the callsite
in check_ptr_to_map_access, hence for that case create a dummy reg to
simulate PTR_TO_BTF_ID access.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, verifier uses MEM_ALLOC type tag to specially tag memory
returned from bpf_ringbuf_reserve helper. However, this is currently
only used for this purpose and there is an implicit assumption that it
only refers to ringbuf memory (e.g. the check for ARG_PTR_TO_ALLOC_MEM
in check_func_arg_reg_off).
Hence, rename MEM_ALLOC to MEM_RINGBUF to indicate this special
relationship and instead open the use of MEM_ALLOC for more generic
allocations made for user types.
Also, since ARG_PTR_TO_ALLOC_MEM_OR_NULL is unused, simply drop it.
Finally, update selftests using 'alloc_' verifier string to 'ringbuf_'.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the verifier has two return types, RET_PTR_TO_ALLOC_MEM, and
RET_PTR_TO_ALLOC_MEM_OR_NULL, however the former is confusingly named to
imply that it carries MEM_ALLOC, while only the latter does. This causes
confusion during code review leading to conclusions like that the return
value of RET_PTR_TO_DYNPTR_MEM_OR_NULL (which is RET_PTR_TO_ALLOC_MEM |
PTR_MAYBE_NULL) may be consumable by bpf_ringbuf_{submit,commit}.
Rename it to make it clear MEM_ALLOC needs to be tacked on top of
RET_PTR_TO_MEM.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the support on the map side to parse, recognize, verify, and build
metadata table for a new special field of the type struct bpf_list_head.
To parameterize the bpf_list_head for a certain value type and the
list_node member it will accept in that value type, we use BTF
declaration tags.
The definition of bpf_list_head in a map value will be done as follows:
struct foo {
struct bpf_list_node node;
int data;
};
struct map_value {
struct bpf_list_head head __contains(foo, node);
};
Then, the bpf_list_head only allows adding to the list 'head' using the
bpf_list_node 'node' for the type struct foo.
The 'contains' annotation is a BTF declaration tag composed of four
parts, "contains:name:node" where the name is then used to look up the
type in the map BTF, with its kind hardcoded to BTF_KIND_STRUCT during
the lookup. The node defines name of the member in this type that has
the type struct bpf_list_node, which is actually used for linking into
the linked list. For now, 'kind' part is hardcoded as struct.
This allows building intrusive linked lists in BPF, using container_of
to obtain pointer to entry, while being completely type safe from the
perspective of the verifier. The verifier knows exactly the type of the
nodes, and knows that list helpers return that type at some fixed offset
where the bpf_list_node member used for this list exists. The verifier
also uses this information to disallow adding types that are not
accepted by a certain list.
For now, no elements can be added to such lists. Support for that is
coming in future patches, hence draining and freeing items is done with
a TODO that will be resolved in a future patch.
Note that the bpf_list_head_free function moves the list out to a local
variable under the lock and releases it, doing the actual draining of
the list items outside the lock. While this helps with not holding the
lock for too long pessimizing other concurrent list operations, it is
also necessary for deadlock prevention: unless every function called in
the critical section would be notrace, a fentry/fexit program could
attach and call bpf_map_update_elem again on the map, leading to the
same lock being acquired if the key matches and lead to a deadlock.
While this requires some special effort on part of the BPF programmer to
trigger and is highly unlikely to occur in practice, it is always better
if we can avoid such a condition.
While notrace would prevent this, doing the draining outside the lock
has advantages of its own, hence it is used to also fix the deadlock
related problem.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In f71b2f6417 ("bpf: Refactor map->off_arr handling"), map->off_arr
was refactored to be btf_field_offs. The number of field offsets is
equal to maximum possible fields limited by BTF_FIELDS_MAX. Hence, reuse
BTF_FIELDS_MAX as spin_lock and timer no longer are to be handled
specially for offset sorting, fix the comment, and remove incorrect
WARN_ON as its rec->cnt can never exceed this value. The reason to keep
separate constant was the it was always more 2 more than total kptrs.
This is no longer the case.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It was found that with the default hierarchy, enabling cpuset in the
child cgroups can trigger a cpuset_attach() call in each of the child
cgroups that have tasks with no change in effective cpus and mems. If
there are many processes in those child cgroups, it will burn quite a
lot of cpu cycles iterating all the tasks without doing useful work.
Optimizing this case by comparing between the old and new cpusets and
skip useless update if there is no change in effective cpus and mems.
Also mems_allowed are less likely to be changed than cpus_allowed. So
skip changing mm if there is no change in effective_mems and
CS_MEMORY_MIGRATE is not set.
By inserting some instrumentation code and running a simple command in
a container 200 times in a cgroup v2 system, it was found that all the
cpuset_attach() calls are skipped (401 times in total) as there was no
change in effective cpus and mems.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cpuset v2 has no spread flags to set. So we can skip spread
flags update if cpuset v2 is being used. Also change the name to
cpuset_update_task_spread_flags() to indicate that there are multiple
spread flags.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
PCI config space access from user space has traditionally been
unrestricted with writes being an understood risk for device operation.
Unfortunately, device breakage or odd behavior from config writes lacks
indicators that can leave driver writers confused when evaluating
failures. This is especially true with the new PCIe Data Object
Exchange (DOE) mailbox protocol where backdoor shenanigans from user
space through things such as vendor defined protocols may affect device
operation without complete breakage.
A prior proposal restricted read and writes completely.[1] Greg and
Bjorn pointed out that proposal is flawed for a couple of reasons.
First, lspci should always be allowed and should not interfere with any
device operation. Second, setpci is a valuable tool that is sometimes
necessary and it should not be completely restricted.[2] Finally
methods exist for full lock of device access if required.
Even though access should not be restricted it would be nice for driver
writers to be able to flag critical parts of the config space such that
interference from user space can be detected.
Introduce pci_request_config_region_exclusive() to mark exclusive config
regions. Such regions trigger a warning and kernel taint if accessed
via user space.
Create pci_warn_once() to restrict the user from spamming the log.
[1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/
[2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There is a very narrow race between schedule() and task_call_func().
CPU0 CPU1
__schedule()
rq_lock();
prev_state = READ_ONCE(prev->__state);
if (... && prev_state) {
deactivate_tasl(rq, prev, ...)
prev->on_rq = 0;
task_call_func()
raw_spin_lock_irqsave(p->pi_lock);
state = READ_ONCE(p->__state);
smp_rmb();
if (... || p->on_rq) // false!!!
rq = __task_rq_lock()
ret = func();
next = pick_next_task();
rq = context_switch(prev, next)
prepare_lock_switch()
spin_release(&__rq_lockp(rq)->dep_map...)
So while the task is on it's way out, it still holds rq->lock for a
little while, and right then task_call_func() comes in and figures it
doesn't need rq->lock anymore (because the task is already dequeued --
but still running there) and then the __set_task_frozen() thing observes
it's holding rq->lock and yells murder.
Avoid this by waiting for p->on_cpu to get cleared, which guarantees
the task is fully finished on the old CPU.
( While arguably the fixes tag is 'wrong' -- none of the previous
task_call_func() users appears to care for this case. )
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lkml.kernel.org/r/Y1kdRNNfUeAU+FNl@hirez.programming.kicks-ass.net
These commits use WARN_ON_ONCE() and kill the offending processes when
deprecated and unknown flags are encountered:
commit c17a6ff932 ("rseq: Kill process when unknown flags are encountered in ABI structures")
commit 0190e4198e ("rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags")
The WARN_ON_ONCE() triggered by userspace input prevents use of
Syzkaller to fuzz the rseq system call.
Replace this WARN_ON_ONCE() by pr_warn_once() messages which contain
actually useful information.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20221102130635.7379-1-mathieu.desnoyers@efficios.com
Based on the test results of kallsyms_on_each_match_symbol() and
kallsyms_on_each_symbol(), the average performance can be improved by
more than 1500 times.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Function kallsyms_on_each_symbol() traverses all symbols and submits each
symbol to the hook 'fn' for judgment and processing. For some cases, the
hook actually only handles the matched symbol, such as livepatch.
Because all symbols are currently sorted by name, all the symbols with the
same name are clustered together. Function kallsyms_lookup_names() gets
the start and end positions of the set corresponding to the specified
name. So we can easily and quickly traverse all the matches.
The test results are as follows (twice): (x86)
kallsyms_on_each_match_symbol: 7454, 7984
kallsyms_on_each_symbol : 11733809, 11785803
kallsyms_on_each_match_symbol() consumes only 0.066% of
kallsyms_on_each_symbol()'s time. In other words, 1523x better
performance.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
kallsyms_seqs_of_names[] records the symbol index sorted by address, the
maximum value in kallsyms_seqs_of_names[] is the number of symbols. And
2^24 = 16777216, which means that three bytes are enough to store the
index. This can help us save (1 * kallsyms_num_syms) bytes of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Currently, to search for a symbol, we need to expand the symbols in
'kallsyms_names' one by one, and then use the expanded string for
comparison. It's O(n).
If we sort names in ascending order like addresses, we can also use
binary search. It's O(log(n)).
In order not to change the implementation of "/proc/kallsyms", the table
kallsyms_names[] is still stored in a one-to-one correspondence with the
address in ascending order.
Add array kallsyms_seqs_of_names[], it's indexed by the sequence number
of the sorted names, and the corresponding content is the sequence number
of the sorted addresses. For example:
Assume that the index of NameX in array kallsyms_seqs_of_names[] is 'i',
the content of kallsyms_seqs_of_names[i] is 'k', then the corresponding
address of NameX is kallsyms_addresses[k]. The offset in kallsyms_names[]
is get_symbol_offset(k).
Note that the memory usage will increase by (4 * kallsyms_num_syms)
bytes, the next two patches will reduce (1 * kallsyms_num_syms) bytes
and properly handle the case CONFIG_LTO_CLANG=y.
Performance test results: (x86)
Before:
min=234, max=10364402, avg=5206926
min=267, max=11168517, avg=5207587
After:
min=1016, max=90894, avg=7272
min=1014, max=93470, avg=7293
The average lookup performance of kallsyms_lookup_name() improved 715x.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Y+/e
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/20221111233733.1088228-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
bpf 2022-11-11
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).
The main changes are:
1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
from Alban Crequy.
2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
from Baisong Zhong.
3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
a small build fix on top, from Peter Zijlstra and Nathan Chancellor.
4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.
5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
Yang Jihong.
6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.
7) Fix copy_map_value() to track special zeroed out areas properly,
from Xu Kuohai.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix offset calculation error in __copy_map_value and zero_map_value
bpf: Initialize same number of free nodes for each pcpu_freelist
selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
selftests/bpf: Fix test_progs compilation failure in 32-bit arch
selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
bpf: Fix memory leaks in __check_func_call
bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================
Link: https://lore.kernel.org/r/20221111231624.938829-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pcpu_freelist_populate() initializes nr_elems / num_possible_cpus() + 1
free nodes for some CPUs, and then possibly one CPU with fewer nodes,
followed by remaining cpus with 0 nodes. For example, when nr_elems == 256
and num_possible_cpus() == 32, CPU 0~27 each gets 9 free nodes, CPU 28 gets
4 free nodes, CPU 29~31 get 0 free nodes, while in fact each CPU should get
8 nodes equally.
This patch initializes nr_elems / num_possible_cpus() free nodes for each
CPU firstly, then allocates the remaining free nodes by one for each CPU
until no free nodes left.
Fixes: e19494edab ("bpf: introduce percpu_freelist")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221110122128.105214-1-xukuohai@huawei.com
Add documentation for BPF_MAP_TYPE_CPUMAP including
kernel version introduced, usage and examples.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107165207.2682075-2-mtahhan@redhat.com
The module_get_next_page() function return error pointers on error
instead of NULL.
Use IS_ERR() to check the return value to fix this.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
param_sysfs_init(), and in particular param_sysfs_builtin() is rather
time-consuming; for my board, it currently takes about 30ms.
That amounts to about 3% of the time budget I have from U-Boot hands
over control to linux and linux must assume responsibility for keeping
the external watchdog happy.
We must still continue to initialize module_kset at subsys_initcall
time, since otherwise any request_module() would fail in
mod_sysfs_init(). However, the bulk of the work in
param_sysfs_builtin(), namely populating /sys/module/*/version and/or
/sys/module/*/parameters/ for builtin modules, can be deferred to
late_initcall time - there's no userspace yet anyway to observe
contents of /sys or the lack thereof.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Unused macros reported by [-Wunused-macros].
These macros are introduced to record the bound address of modules.
Commit 80b8bf4369 ("module: Always have struct mod_tree_root") made
"struct mod_tree_root" always present and its members addr_min and
addr_max can be directly accessed.
Macros module_addr_min and module_addr_min are not used anymore, so remove
them.
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mcgrof: massaged the commit messsage as suggested by Miroslav]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The variable module_sysfs_initialized is used for checking whether
module_kset has been initialized. Checking module_kset itself works
just fine for that.
This is a leftover from commit 7405c1e15e ("kset: convert /sys/module
to use kset_create").
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
[mcgrof: adjusted commit log as suggested by Christophe Leroy]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys
from memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg
to network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmNtnlEACgkQMUZtbf5S
IrvSfg//axNePPwFiAdbYUmSNmnnv2Zpyz1l9a2/WvKKMeyAH3d4zuQGyTz7VgoJ
at4k1fr14vm+3qBhlL0UFdd+h/wBewwuuWLiogIfhgqDO7KavZsbTJWQ59DSHH08
ujihvt7dF9ByVd3hOpUDjrYGd2rPghqXk8l/2gpPp/KIrbj1jSW0DdF7Y48/0RRw
PYzNYZ9tqICw1crBT52ZilNEebGaUuWpPLzV2owlhJpzqyRLcgd9GWN9DkKieiiw
wF0Wi7A8b/+cR/Wo93RAXtvEayN9vp/t6iyiI1opv3Yg6bhAMlzDUX/v79ccnAM6
wJ3b8bKyLgph5ZTNmbL8GwC2pwl/20hOgCVLb/Haykqrk4oO2+xD39fjKniFP/71
IBYuLCethi0zmiSyR8yO4iyrfJCnkJffoxtcG8O5x+FuCfMI1xQWx44bSc34KlqT
vDw/VmnIfXH9K3F+QdWtlZfLiM0F6vd7RNGIxX0cC2wQCwaubCo0LOs5vl2+jpR8
Xclo+OquQtX5XRqGGQDtA7kCM9jfuc/DWla1v10wy7ZagiKkdfrV7Zu7r431Dtwn
BWeKZAA38o9WNRb4FD5GGUN0dK5R5V25LmbpvYuerq5Ub3pGJgHMsdA15LqsqTnW
MGIokGFhu7ToAQEnaRkF96jh3c3yoMU/sWXsqh7x/G6Tir7JGUw=
=WPta
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
Certain files in procfs are formatted in byteorder-dependent formats.
For example the IP addresses in /proc/net/udp.
When using emulation like qemu-user, applications are not guaranteed to
be using the same byteorder as the kernel.
Therefore the kernel needs to provide a way for applications to discover
the byteorder used in API-filesystems.
Using systemcalls is not enough because these are intercepted and
translated by the emulation.
Also this makes it easier for non-compiled applications like
shellscripts to discover the byteorder.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221103152407.3348-1-linux@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace printk(KERN_WARNING) by pr_warn() and printk() by pr_info().
While at it, use %pa for the resource_size_t variables. With that,
for the sake of consistency, introduce a temporary variable for
the end address in iomem_map_sanity_check() like it's done in another
function in the same module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221109155618.42276-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to allow arches to use code patching to conditionally emit the
shadow stack pushes and pops, rather than always taking the performance
hit even on CPUs that implement alternatives such as stack pointer
authentication on arm64, add a Kconfig symbol that can be set by the
arch to omit the SCS codegen itself, without otherwise affecting how
support code for SCS and compiler options (for register reservation, for
instance) are emitted.
Also, add a static key and some plumbing to omit the allocation of
shadow call stack for dynamic SCS configurations if SCS is disabled at
runtime.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currenty there is no upper limit for /proc/sys/vm/page-cluster, and it's a
bit shift value, so it could result in overflow of the 32-bit integer.
Add a reasonable upper limit for it, read-in at most 2**31 pages, which is
a large enough value for readahead.
Link: https://lkml.kernel.org/r/20221023162533.81561-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The priority of hotplug memory callback is defined in a different file.
And there are some callers using numbers directly. Collect them together
into include/linux/memory.h for easy reading. This allows us to sort
their priorities more intuitively without additional comments.
Link: https://lkml.kernel.org/r/20220923033347.3935160-9-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Use hotplug_memory_notifier() instead of
register_hotmemory_notifier()", v4.
Commit f02c696800 ("include/linux/memory.h: implement
register_hotmemory_notifier()") introduced register_hotmemory_notifier()
to avoid a compile problem with gcc-4.4.4:
When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier
handlers to be included in the .o files, for space reasons.
The existing hotplug_memory_notifier() tries to handle this but testing
with gcc-4.4.4 shows that it doesn't work - the hotplug functions are
still present in the .o files.
Since commit 76ae847497 ("Documentation: raise minimum supported
version of GCC to 5.1") has already updated the minimum gcc version to
5.1. The previous problem mentioned in f02c696800 does not exist. So
we can now revert to use hotplug_memory_notifier() directly rather than
register_hotmemory_notifier().
In the last patch, we move all hotplug memory notifier priority to same
file for easy sorting.
This patch (of 8):
Commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1") updated the minimum gcc version to 5.1. So the problem
mentioned in f02c696800 ("include/linux/memory.h: implement
register_hotmemory_notifier()") no longer exist. So we can now switch to
use hotplug_memory_notifier() directly rather than
register_hotmemory_notifier().
Link: https://lkml.kernel.org/r/20220923033347.3935160-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20220923033347.3935160-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmemleak reports this issue:
unreferenced object 0xffff88817139d000 (size 2048):
comm "test_progs", pid 33246, jiffies 4307381979 (age 45851.820s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000045f075f0>] kmalloc_trace+0x27/0xa0
[<0000000098b7c90a>] __check_func_call+0x316/0x1230
[<00000000b4c3c403>] check_helper_call+0x172e/0x4700
[<00000000aa3875b7>] do_check+0x21d8/0x45e0
[<000000001147357b>] do_check_common+0x767/0xaf0
[<00000000b5a595b4>] bpf_check+0x43e3/0x5bc0
[<0000000011e391b1>] bpf_prog_load+0xf26/0x1940
[<0000000007f765c0>] __sys_bpf+0xd2c/0x3650
[<00000000839815d6>] __x64_sys_bpf+0x75/0xc0
[<00000000946ee250>] do_syscall_64+0x3b/0x90
[<0000000000506b7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root case here is: In function prepare_func_exit(), the callee is
not released in the abnormal scenario after "state->curframe--;". To
fix, move "state->curframe--;" to the very bottom of the function,
right when we free callee and reset frame[] pointer to NULL, as Andrii
suggested.
In addition, function __check_func_call() has a similar problem. In
the abnormal scenario before "state->curframe++;", the callee also
should be released by free_func_state().
Fixes: 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: fd978bf7fd ("bpf: Add reference tracking to verifier")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1667884291-15666-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(),
which fires if pending_sigtrap was already set: returning to user space
without consuming pending_sigtrap, and then having the event fire again
would re-enter the kernel and trigger the WARN.
This, however, seemed to miss the case where some events not associated
with progress in the user space task can fire and the interrupt handler
runs before the IRQ work meant to consume pending_sigtrap (and generate
the SIGTRAP).
syzbot gifted us this stack trace:
| WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow
| Modules linked in:
| CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
| RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313
| <...>
| Call Trace:
| <TASK>
| perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729
| __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
| __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749
| hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
| local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline]
| __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113
| sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107
| asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649
| <...>
| </TASK>
In this case, syzbot produced a program with event type
PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer
manages to fire again before the IRQ work got a chance to run, all while
never having returned to user space.
Improve the WARN to check for real progress in user space: approximate
this by storing a 32-bit hash of the current IP into pending_sigtrap,
and if an event fires while pending_sigtrap still matches the previous
IP, we assume no progress (false negatives are possible given we could
return to user space and trigger again on the same IP).
Fixes: ca6c21327c ("perf: Fix missing SIGTRAPs")
Reported-by: syzbot+b8ded3e2e2c6adde4990@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221031093513.3032814-1-elver@google.com
When building with clang:
kernel/bpf/dispatcher.c:126:33: error: pointer type mismatch ('void *' and 'unsigned int (*)(const void *, const struct bpf_insn *, bpf_func_t)' (aka 'unsigned int (*)(const void *, const struct bpf_insn *, unsigned int (*)(const void *, const struct bpf_insn *))')) [-Werror,-Wpointer-type-mismatch]
__BPF_DISPATCHER_UPDATE(d, new ?: &bpf_dispatcher_nop_func);
~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bpf.h:1045:54: note: expanded from macro '__BPF_DISPATCHER_UPDATE'
__static_call_update((_d)->sc_key, (_d)->sc_tramp, (_new))
^~~~
1 error generated.
The warning is pointing out that the type of new ('void *') and
&bpf_dispatcher_nop_func are not compatible, which could have side
effects coming out of a conditional operator due to promotion rules.
Add the explicit cast to 'void *' to make it clear that this is
expected, as __BPF_DISPATCHER_UPDATE() expands to a call to
__static_call_update(), which expects a 'void *' as its final argument.
Fixes: c86df29d11 ("bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)")
Link: https://github.com/ClangBuiltLinux/linux/issues/1755
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221107170711.42409-1-nathan@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
-----BEGIN PGP SIGNATURE-----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=midC
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
The dispatcher function is currently abusing the ftrace __fentry__
call location for its own purposes -- this obviously gives trouble
when the dispatcher and ftrace are both in use.
A previous solution tried using __attribute__((patchable_function_entry()))
which works, except it is GCC-8+ only, breaking the build on the
earlier still supported compilers. Instead use static_call() -- which
has its own annotations and does not conflict with ftrace -- to
rewrite the dispatch function.
By using: return static_call()(ctx, insni, bpf_func) you get a perfect
forwarding tail call as function body (iow a single jmp instruction).
By having the default static_call() target be bpf_dispatcher_nop_func()
it retains the default behaviour (an indirect call to the argument
function). Only once a dispatcher program is attached is the target
rewritten to directly call the JIT'ed image.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/Y1/oBlK0yFk5c/Im@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/bpf/20221103120647.796772565@infradead.org
Because __attribute__((patchable_function_entry)) is only available
since GCC-8 this solution fails to build on the minimum required GCC
version.
Undo these changes so we might try again -- without cluttering up the
patches with too many changes.
This is an almost complete revert of:
dbe69b2998 ("bpf: Fix dispatcher patchable function entry to 5 bytes nop")
ceea991a01 ("bpf: Move bpf_dispatcher function out of ftrace locations")
(notably the arch/x86/Kconfig hunk is kept).
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/439d8dc735bb4858875377df67f1b29a@AcuMS.aculab.com
Link: https://lore.kernel.org/bpf/20221103120647.728830733@infradead.org
Exploit the property of about-to-be-checkpointed state to be able to
forget all precise markings up to that point even more aggressively. We
now clear all potentially inherited precise markings right before
checkpointing and branching off into child state. If any of children
states require precise knowledge of any SCALAR register, those will be
propagated backwards later on before this state is finalized, preserving
correctness.
There is a single selftests BPF program change, but tremendous one: 25x
reduction in number of verified instructions and states in
trace_virtqueue_add_sgs.
Cilium results are more modest, but happen across wider range of programs.
SELFTESTS RESULTS
=================
$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results.csv ~/imprecise-aggressive-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------------- ----------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
loop6.bpf.linked1.o trace_virtqueue_add_sgs 398057 15114 -382943 (-96.20%) 8717 336 -8381 (-96.15%)
------------------- ----------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
CILIUM RESULTS
==============
$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results-cilium.csv ~/imprecise-aggressive-results-cilium.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------- -------------------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_host.o tail_handle_nat_fwd_ipv4 23426 23221 -205 (-0.88%) 1537 1515 -22 (-1.43%)
bpf_host.o tail_handle_nat_fwd_ipv6 13009 12904 -105 (-0.81%) 719 708 -11 (-1.53%)
bpf_host.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%)
bpf_host.o tail_nodeport_nat_ipv6_egress 3446 3406 -40 (-1.16%) 203 198 -5 (-2.46%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 23426 23221 -205 (-0.88%) 1537 1515 -22 (-1.43%)
bpf_lxc.o tail_handle_nat_fwd_ipv6 13009 12904 -105 (-0.81%) 719 708 -11 (-1.53%)
bpf_lxc.o tail_ipv4_ct_egress 5074 4897 -177 (-3.49%) 255 248 -7 (-2.75%)
bpf_lxc.o tail_ipv4_ct_ingress 5100 4923 -177 (-3.47%) 255 248 -7 (-2.75%)
bpf_lxc.o tail_ipv4_ct_ingress_policy_only 5100 4923 -177 (-3.47%) 255 248 -7 (-2.75%)
bpf_lxc.o tail_ipv6_ct_egress 4558 4536 -22 (-0.48%) 188 187 -1 (-0.53%)
bpf_lxc.o tail_ipv6_ct_ingress 4578 4556 -22 (-0.48%) 188 187 -1 (-0.53%)
bpf_lxc.o tail_ipv6_ct_ingress_policy_only 4578 4556 -22 (-0.48%) 188 187 -1 (-0.53%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%)
bpf_overlay.o tail_nodeport_nat_ipv6_egress 3482 3442 -40 (-1.15%) 204 201 -3 (-1.47%)
bpf_xdp.o tail_nodeport_nat_egress_ipv4 17200 15619 -1581 (-9.19%) 1111 1010 -101 (-9.09%)
------------- -------------------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Setting reg->precise to true in current state is not necessary from
correctness standpoint, but it does pessimise the whole precision (or
rather "imprecision", because that's what we want to keep as much as
possible) tracking. Why is somewhat subtle and my best attempt to
explain this is recorded in an extensive comment for __mark_chain_precise()
function. Some more careful thinking and code reading is probably required
still to grok this completely, unfortunately. Whiteboarding and a bunch
of extra handwaiving in person would be even more helpful, but is deemed
impractical in Git commit.
Next patch pushes this imprecision property even further, building on top of
the insights described in this patch.
End results are pretty nice, we get reduction in number of total instructions
and states verified due to a better states reuse, as some of the states are now
more generic and permissive due to less unnecessary precise=true requirements.
SELFTESTS RESULTS
=================
$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results.csv ~/imprecise-early-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
--------------------------------------- ---------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_iter_ksym.bpf.linked1.o dump_ksym 347 285 -62 (-17.87%) 20 19 -1 (-5.00%)
pyperf600_bpf_loop.bpf.linked1.o on_event 3678 3736 +58 (+1.58%) 276 285 +9 (+3.26%)
setget_sockopt.bpf.linked1.o skops_sockopt 4038 3947 -91 (-2.25%) 347 343 -4 (-1.15%)
test_l4lb.bpf.linked1.o balancer_ingress 4559 2611 -1948 (-42.73%) 118 105 -13 (-11.02%)
test_l4lb_noinline.bpf.linked1.o balancer_ingress 6279 6268 -11 (-0.18%) 237 236 -1 (-0.42%)
test_misc_tcp_hdr_options.bpf.linked1.o misc_estab 1307 1303 -4 (-0.31%) 100 99 -1 (-1.00%)
test_sk_lookup.bpf.linked1.o ctx_narrow_access 456 447 -9 (-1.97%) 39 38 -1 (-2.56%)
test_sysctl_loop1.bpf.linked1.o sysctl_tcp_mem 1389 1384 -5 (-0.36%) 26 25 -1 (-3.85%)
test_tc_dtime.bpf.linked1.o egress_fwdns_prio101 518 485 -33 (-6.37%) 51 46 -5 (-9.80%)
test_tc_dtime.bpf.linked1.o egress_host 519 468 -51 (-9.83%) 50 44 -6 (-12.00%)
test_tc_dtime.bpf.linked1.o ingress_fwdns_prio101 842 1000 +158 (+18.76%) 73 88 +15 (+20.55%)
xdp_synproxy_kern.bpf.linked1.o syncookie_tc 405757 373173 -32584 (-8.03%) 25735 22882 -2853 (-11.09%)
xdp_synproxy_kern.bpf.linked1.o syncookie_xdp 479055 371590 -107465 (-22.43%) 29145 22207 -6938 (-23.81%)
--------------------------------------- ---------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
Slight regression in test_tc_dtime.bpf.linked1.o/ingress_fwdns_prio101
is left for a follow up, there might be some more precision-related bugs
in existing BPF verifier logic.
CILIUM RESULTS
==============
$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results-cilium.csv ~/imprecise-early-results-cilium.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_host.o cil_from_host 762 556 -206 (-27.03%) 43 37 -6 (-13.95%)
bpf_host.o tail_handle_nat_fwd_ipv4 23541 23426 -115 (-0.49%) 1538 1537 -1 (-0.07%)
bpf_host.o tail_nodeport_nat_egress_ipv4 33592 33566 -26 (-0.08%) 2163 2161 -2 (-0.09%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 23541 23426 -115 (-0.49%) 1538 1537 -1 (-0.07%)
bpf_overlay.o tail_nodeport_nat_egress_ipv4 33581 33543 -38 (-0.11%) 2160 2157 -3 (-0.14%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 21659 20920 -739 (-3.41%) 1440 1376 -64 (-4.44%)
bpf_xdp.o tail_handle_nat_fwd_ipv6 17084 17039 -45 (-0.26%) 907 905 -2 (-0.22%)
bpf_xdp.o tail_lb_ipv4 73442 73430 -12 (-0.02%) 4370 4369 -1 (-0.02%)
bpf_xdp.o tail_lb_ipv6 152114 151895 -219 (-0.14%) 6493 6479 -14 (-0.22%)
bpf_xdp.o tail_nodeport_nat_egress_ipv4 17377 17200 -177 (-1.02%) 1125 1111 -14 (-1.24%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv6 6405 6397 -8 (-0.12%) 309 308 -1 (-0.32%)
bpf_xdp.o tail_rev_nodeport_lb4 7126 6934 -192 (-2.69%) 414 402 -12 (-2.90%)
bpf_xdp.o tail_rev_nodeport_lb6 18059 17905 -154 (-0.85%) 1105 1096 -9 (-0.81%)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stop forcing precise=true for SCALAR registers when BPF program has any
subprograms. Current restriction means that any BPF program, as soon as
it uses subprograms, will end up not getting any of the precision
tracking benefits in reduction of number of verified states.
This patch keeps the fallback mark_all_scalars_precise() behavior if
precise marking has to cross function frames. E.g., if subprogram
requires R1 (first input arg) to be marked precise, ideally we'd need to
backtrack to the parent function and keep marking R1 and its
dependencies as precise. But right now we give up and force all the
SCALARs in any of the current and parent states to be forced to
precise=true. We can lift that restriction in the future.
But this patch fixes two issues identified when trying to enable
precision tracking for subprogs.
First, prevent "escaping" from top-most state in a global subprog. While
with entry-level BPF program we never end up requesting precision for
R1-R5 registers, because R2-R5 are not initialized (and so not readable
in correct BPF program), and R1 is PTR_TO_CTX, not SCALAR, and so is
implicitly precise. With global subprogs, though, it's different, as
global subprog a) can have up to 5 SCALAR input arguments, which might
get marked as precise=true and b) it is validated in isolation from its
main entry BPF program. b) means that we can end up exhausting parent
state chain and still not mark all registers in reg_mask as precise,
which would lead to verifier bug warning.
To handle that, we need to consider two cases. First, if the very first
state is not immediately "checkpointed" (i.e., stored in state lookup
hashtable), it will get correct first_insn_idx and last_insn_idx
instruction set during state checkpointing. As such, this case is
already handled and __mark_chain_precision() already handles that by
just doing nothing when we reach to the very first parent state.
st->parent will be NULL and we'll just stop. Perhaps some extra check
for reg_mask and stack_mask is due here, but this patch doesn't address
that issue.
More problematic second case is when global function's initial state is
immediately checkpointed before we manage to process the very first
instruction. This is happening because when there is a call to global
subprog from the main program the very first subprog's instruction is
marked as pruning point, so before we manage to process first
instruction we have to check and checkpoint state. This patch adds
a special handling for such "empty" state, which is identified by having
st->last_insn_idx set to -1. In such case, we check that we are indeed
validating global subprog, and with some sanity checking we mark input
args as precise if requested.
Note that we also initialize state->first_insn_idx with correct start
insn_idx offset. For main program zero is correct value, but for any
subprog it's quite confusing to not have first_insn_idx set. This
doesn't have any functional impact, but helps with debugging and state
printing. We also explicitly initialize state->last_insns_idx instead of
relying on is_state_visited() to do this with env->prev_insns_idx, which
will be -1 on the very first instruction. This concludes necessary
changes to handle specifically global subprog's precision tracking.
Second identified problem was missed handling of BPF helper functions
that call into subprogs (e.g., bpf_loop and few others). From precision
tracking and backtracking logic's standpoint those are effectively calls
into subprogs and should be called as BPF_PSEUDO_CALL calls.
This patch takes the least intrusive way and just checks against a short
list of current BPF helpers that do call subprogs, encapsulated in
is_callback_calling_function() function. But to prevent accidentally
forgetting to add new BPF helpers to this "list", we also do a sanity
check in __check_func_call, which has to be called for each such special
BPF helper, to validate that BPF helper is indeed recognized as
callback-calling one. This should catch any missed checks in the future.
Adding some special flags to be added in function proto definitions
seemed like an overkill in this case.
With the above changes, it's possible to remove forceful setting of
reg->precise to true in __mark_reg_unknown, which turns on precision
tracking both inside subprogs and entry progs that have subprogs. No
warnings or errors were detected across all the selftests, but also when
validating with veristat against internal Meta BPF objects and Cilium
objects. Further, in some BPF programs there are noticeable reduction in
number of states and instructions validated due to more effective
precision tracking, especially benefiting syncookie test.
$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/subprog-precise-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
---------------------------------------- -------------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
pyperf600_bpf_loop.bpf.linked1.o on_event 3966 3678 -288 (-7.26%) 306 276 -30 (-9.80%)
pyperf_global.bpf.linked1.o on_event 7563 7530 -33 (-0.44%) 520 517 -3 (-0.58%)
pyperf_subprogs.bpf.linked1.o on_event 36358 36934 +576 (+1.58%) 2499 2531 +32 (+1.28%)
setget_sockopt.bpf.linked1.o skops_sockopt 3965 4038 +73 (+1.84%) 343 347 +4 (+1.17%)
test_cls_redirect_subprogs.bpf.linked1.o cls_redirect 64965 64901 -64 (-0.10%) 4619 4612 -7 (-0.15%)
test_misc_tcp_hdr_options.bpf.linked1.o misc_estab 1491 1307 -184 (-12.34%) 110 100 -10 (-9.09%)
test_pkt_access.bpf.linked1.o test_pkt_access 354 349 -5 (-1.41%) 25 24 -1 (-4.00%)
test_sock_fields.bpf.linked1.o egress_read_sock_fields 435 375 -60 (-13.79%) 22 20 -2 (-9.09%)
test_sysctl_loop2.bpf.linked1.o sysctl_tcp_mem 1508 1501 -7 (-0.46%) 29 28 -1 (-3.45%)
test_tc_dtime.bpf.linked1.o egress_fwdns_prio100 468 435 -33 (-7.05%) 45 41 -4 (-8.89%)
test_tc_dtime.bpf.linked1.o ingress_fwdns_prio100 398 408 +10 (+2.51%) 42 39 -3 (-7.14%)
test_tc_dtime.bpf.linked1.o ingress_fwdns_prio101 1096 842 -254 (-23.18%) 97 73 -24 (-24.74%)
test_tcp_hdr_options.bpf.linked1.o estab 2758 2408 -350 (-12.69%) 208 181 -27 (-12.98%)
test_urandom_usdt.bpf.linked1.o urand_read_with_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o urand_read_without_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o urandlib_read_with_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o urandlib_read_without_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%)
test_xdp_noinline.bpf.linked1.o balancer_ingress_v6 4302 4294 -8 (-0.19%) 257 256 -1 (-0.39%)
xdp_synproxy_kern.bpf.linked1.o syncookie_tc 583722 405757 -177965 (-30.49%) 35846 25735 -10111 (-28.21%)
xdp_synproxy_kern.bpf.linked1.o syncookie_xdp 609123 479055 -130068 (-21.35%) 35452 29145 -6307 (-17.79%)
---------------------------------------- -------------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When equivalent completed state is found and it has additional precision
restrictions, BPF verifier propagates precision to
currently-being-verified state chain (i.e., including parent states) so
that if some of the states in the chain are not yet completed, necessary
precision restrictions are enforced.
Unfortunately, right now this happens only for the last frame (deepest
active subprogram's frame), not all the frames. This can lead to
incorrect matching of states due to missing precision marker. Currently
this doesn't seem possible as BPF verifier forces everything to precise
when validated BPF program has any subprograms. But with the next patch
lifting this restriction, this becomes problematic.
In fact, without this fix, we'll start getting failure in one of the
existing test_verifier test cases:
#906/p precise: cross frame pruning FAIL
Unexpected success to load!
verification time 48 usec
stack depth 0+0
processed 26 insns (limit 1000000) max_states_per_insn 3 total_states 17 peak_states 17 mark_read 8
This patch adds precision propagation across all frames.
Fixes: a3ce685dd0 ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When processing ALU/ALU64 operations (apart from BPF_MOV, which is
handled correctly already; and BPF_NEG and BPF_END are special and don't
have source register), if destination register is already marked
precise, this causes problem with potentially missing precision tracking
for the source register. E.g., when we have r1 >>= r5 and r1 is marked
precise, but r5 isn't, this will lead to r5 staying as imprecise. This
is due to the precision backtracking logic stopping early when it sees
r1 is already marked precise. If r1 wasn't precise, we'd keep
backtracking and would add r5 to the set of registers that need to be
marked precise. So there is a discrepancy here which can lead to invalid
and incompatible states matched due to lack of precision marking on r5.
If r1 wasn't precise, precision backtracking would correctly mark both
r1 and r5 as precise.
This is simple to fix, though. During the forward instruction simulation
pass, for arithmetic operations of `scalar <op>= scalar` form (where
<op> is ALU or ALU64 operations), if destination register is already
precise, mark source register as precise. This applies only when both
involved registers are SCALARs. `ptr += scalar` and `scalar += ptr`
cases are already handled correctly.
This does have (negative) effect on some selftest programs and few
Cilium programs. ~/baseline-tmp-results.csv are veristat results with
this patch, while ~/baseline-results.csv is without it. See post
scriptum for instructions on how to make Cilium programs testable with
veristat. Correctness has a price.
$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/baseline-tmp-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_cubic.bpf.linked1.o bpf_cubic_cong_avoid 997 1700 +703 (+70.51%) 62 90 +28 (+45.16%)
test_l4lb.bpf.linked1.o balancer_ingress 4559 5469 +910 (+19.96%) 118 126 +8 (+6.78%)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
$ ./veristat -C -e file,prog,verdict,insns,states ~/baseline-results-cilium.csv ~/baseline-tmp-results-cilium.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_host.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_host.o tail_nodeport_nat_ipv6_egress 3396 3446 +50 (+1.47%) 201 203 +2 (+1.00%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_xdp.o tail_lb_ipv4 71736 73442 +1706 (+2.38%) 4295 4370 +75 (+1.75%)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
P.S. To make Cilium ([0]) programs libbpf-compatible and thus
veristat-loadable, apply changes from topmost commit in [1], which does
minimal changes to Cilium source code, mostly around SEC() annotations
and BPF map definitions.
[0] https://github.com/cilium/cilium/
[1] https://github.com/anakryiko/cilium/commits/libbpf-friendliness
Fixes: b5dc0163d8 ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor map->off_arr handling into generic functions that can work on
their own without hardcoding map specific code. The btf_fields_offs
structure is now returned from btf_parse_field_offs, which can be reused
later for types in program BTF.
All functions like copy_map_value, zero_map_value call generic
underlying functions so that they can also be reused later for copying
to values allocated in programs which encode specific fields.
Later, some helper functions will also require access to this
btf_field_offs structure to be able to skip over special fields at
runtime.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-9-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that kptr_off_tab has been refactored into btf_record, and can hold
more than one specific field type, accomodate bpf_spin_lock and
bpf_timer as well.
While they don't require any more metadata than offset, having all
special fields in one place allows us to share the same code for
allocated user defined types and handle both map values and these
allocated objects in a similar fashion.
As an optimization, we still keep spin_lock_off and timer_off offsets in
the btf_record structure, just to avoid having to find the btf_field
struct each time their offset is needed. This is mostly needed to
manipulate such objects in a map value at runtime. It's ok to hardcode
just one offset as more than one field is disallowed.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To prepare the BPF verifier to handle special fields in both map values
and program allocated types coming from program BTF, we need to refactor
the kptr_off_tab handling code into something more generic and reusable
across both cases to avoid code duplication.
Later patches also require passing this data to helpers at runtime, so
that they can work on user defined types, initialize them, destruct
them, etc.
The main observation is that both map values and such allocated types
point to a type in program BTF, hence they can be handled similarly. We
can prepare a field metadata table for both cases and store them in
struct bpf_map or struct btf depending on the use case.
Hence, refactor the code into generic btf_record and btf_field member
structs. The btf_record represents the fields of a specific btf_type in
user BTF. The cnt indicates the number of special fields we successfully
recognized, and field_mask is a bitmask of fields that were found, to
enable quick determination of availability of a certain field.
Subsequently, refactor the rest of the code to work with these generic
types, remove assumptions about kptr and kptr_off_tab, rename variables
to more meaningful names, etc.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY2RS7QAKCRDbK58LschI
g6RVAQC1FdSXMrhn369NGCG1Vox1QYn2/5P32LSIV1BKqiQsywEAsxgYNrdCPTua
ie91Q5IJGT9pFl1UR50UrgL11DI5BgI=
=sdhO
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2022-11-04
We've added 8 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 113 insertions(+), 16 deletions(-).
The main changes are:
1) Fix memory leak upon allocation failure in BPF verifier's stack state
tracking, from Kees Cook.
2) Fix address leakage when BPF progs release reference to an object,
from Youlin Li.
3) Fix BPF CI breakage from buggy in.h uapi header dependency,
from Andrii Nakryiko.
4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui.
5) Fix BPF sockmap lockdep warning by cancelling psock work outside
of socket lock, from Cong Wang.
6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting,
from Wang Yufen.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add verifier test for release_reference()
bpf: Fix wrong reg type conversion in release_reference()
bpf, sock_map: Move cancel_work_sync() out of sock lock
tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI
net/ipv4: Fix linux/in.h header dependencies
bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
bpf, verifier: Fix memory leak in array reallocation for stack state
====================
Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is not scalable to maintain a list of types that can have non-zero
ref_obj_id. It is never set for scalars anyway, so just remove the
conditional on register types and print it whenever it is non-zero.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For the case where allow_ptr_leaks is false, code is checking whether
slot type is STACK_INVALID and STACK_SPILL and rejecting other cases.
This is a consequence of incorrectly checking for register type instead
of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the
check.
Fixes: 01f810ace9 ("bpf: Allow variable-offset stack access")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When support was added for spilled PTR_TO_BTF_ID to be accessed by
helper memory access, the stack slot was not overwritten to STACK_MISC
(and that too is only safe when env->allow_ptr_leaks is true).
This means that helpers who take ARG_PTR_TO_MEM and write to it may
essentially overwrite the value while the verifier continues to track
the slot for spilled register.
This can cause issues when PTR_TO_BTF_ID is spilled to stack, and then
overwritten by helper write access, which can then be passed to BPF
helpers or kfuncs.
Handle this by falling back to the case introduced in a later commit,
which will also handle PTR_TO_BTF_ID along with other pointer types,
i.e. cd17d38f8b ("bpf: Permits pointers on stack for helper calls").
Finally, include a comment on why REG_LIVE_WRITTEN is not being set when
clobber is set to true. In short, the reason is that while when clobber
is unset, we know that we won't be writing, when it is true, we *may*
write to any of the stack slots in that range. It may be a partial or
complete write, to just one or many stack slots.
We cannot be sure, hence to be conservative, we leave things as is and
never set REG_LIVE_WRITTEN for any stack slot. However, clobber still
needs to reset them to STACK_MISC assuming writes happened. However read
marks still need to be propagated upwards from liveness point of view,
as parent stack slot's contents may still continue to matter to child
states.
Cc: Yonghong Song <yhs@meta.com>
Fixes: 1d68f22b3d ("bpf: Handle spilled PTR_TO_BTF_ID properly when checking stack_boundary")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is useful in particular to mark the pointer as volatile, so that
compiler treats each load and store to the field as a volatile access.
The alternative is having to define and use READ_ONCE and WRITE_ONCE in
the BPF program.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit ab51e15d53 ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.
To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().
Link: https://lore.kernel.org/all/166677683946.1459107.15997653945538644683.stgit@devnote3/
Fixes: cad9931f64 ("fprobe: Add ftrace based probe APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Check if fp->rethook succeeded to be allocated. Otherwise, if
rethook_alloc() fails, then we end up dereferencing a NULL pointer in
rethook_add_node().
Link: https://lore.kernel.org/all/20221025031209.954836-1-rafaelmendsr@gmail.com/
Fixes: 5b0ab78998 ("fprobe: Add exit_handler support")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In aggregate kprobe case, when arm_kprobe failed,
we need set the kp->flags with KPROBE_FLAG_DISABLED again.
If not, the 'kp' kprobe will been considered as enabled
but it actually not enabled.
Link: https://lore.kernel.org/all/20220902155820.34755-1-liq3ea@163.com/
Fixes: 12310e3437 ("kprobes: Propagate error from arm_kprobe_ftrace()")
Cc: stable@vger.kernel.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.
When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply __mark_reg_unknown() to each relevant register.
It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.
Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.
Fixes: fd978bf7fd ("bpf: Add reference tracking to verifier")
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com
The actual maximum image size formula in hibernate_preallocate_memory()
is as follows:
max_size = (count - (size + PAGES_FOR_IO)) / 2
- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
but the one in the kerneldoc comment of the function is different and
incorrect.
Fixes: ddeb648708 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132
show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b4/0x248 lib/dump_stack.c:118
print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387
__kasan_report mm/kasan/report.c:547 [inline]
kasan_report+0x118/0x210 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load8+0x98/0xc0 mm/kasan/generic.c:253
__ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
ftrace_graph_call+0x0/0x4
__might_sleep+0x8/0x100 include/linux/perf_event.h:1170
__might_fault mm/memory.c:5183 [inline]
__might_fault+0x58/0x70 mm/memory.c:5171
do_strncpy_from_user lib/strncpy_from_user.c:41 [inline]
strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139
getname_flags+0xb0/0x31c fs/namei.c:149
getname+0x2c/0x40 fs/namei.c:209
[...]
Allocated by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:479 [inline]
__kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449
kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493
kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:675 [inline]
perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
__arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723
[...]
Freed by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track+0x24/0x34 mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358
__kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437
__kasan_slab_free mm/kasan/common.c:445 [inline]
kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446
slab_free_hook mm/slub.c:1569 [inline]
slab_free_freelist_hook mm/slub.c:1608 [inline]
slab_free mm/slub.c:3179 [inline]
kfree+0x12c/0xc10 mm/slub.c:4176
perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
[...]
Link: https://lore.kernel.org/linux-trace-kernel/20221103031010.166498-1-lihuafei1@huawei.com
Fixes: edb096e007 ("ftrace: Fix memleak when unregistering dynamic ops when tracing disabled")
Cc: stable@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On some machines the number of listed CPUs may be bigger than the actual
CPUs that exist. The tracing subsystem allocates a per_cpu directory with
access to the per CPU ring buffer via a cpuX file. But to save space, the
ring buffer will only allocate buffers for online CPUs, even though the
CPU array will be as big as the nr_cpu_ids.
With the addition of waking waiters on the ring buffer when closing the
file, the ring_buffer_wake_waiters() now needs to make sure that the
buffer is allocated (with the irq_work allocated with it) before trying to
wake waiters, as it will cause a NULL pointer dereference.
While debugging this, I added a NULL check for the buffer itself (which is
OK to do), and also NULL pointer checks against buffer->buffers (which is
not fine, and will WARN) as well as making sure the CPU number passed in
is within the nr_cpu_ids (which is also not fine if it isn't).
Link: https://lore.kernel.org/all/87h6zklb6n.wl-tiwai@suse.de/
Link: https://lore.kernel.org/all/CAM6Wdxc0KRJMXVAA0Y=u6Jh2V=uWB-_Fn6M4xRuNppfXzL1mUg@mail.gmail.com/
Link: https://lkml.kernel.org/linux-trace-kernel/20221101191009.1e7378c8@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Steven Noonan <steven.noonan@gmail.com>
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Roland Ruckerbauer <roland.rucky@gmail.com>
Fixes: f3ddb74ad0 ("tracing: Wake up ring buffer waiters on closing of the file")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY2GuKgAKCRDbK58LschI
gy32AP9PI0e/bUGDExKJ8g97PeeEtnpj4TTI6g+XKILtYnyXlgD/Rk4j2D/f3IBF
Ha9TmqYvAUim+U/g50vUrNuoNLNJ5w8=
=OKC1
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2022-11-02
We've added 70 non-merge commits during the last 14 day(s) which contain
a total of 96 files changed, 3203 insertions(+), 640 deletions(-).
The main changes are:
1) Make cgroup local storage available to non-cgroup attached BPF programs
such as tc BPF ones, from Yonghong Song.
2) Avoid unnecessary deadlock detection and failures wrt BPF task storage
helpers, from Martin KaFai Lau.
3) Add LLVM disassembler as default library for dumping JITed code
in bpftool, from Quentin Monnet.
4) Various kprobe_multi_link fixes related to kernel modules,
from Jiri Olsa.
5) Optimize x86-64 JIT with emitting BMI2-based shift instructions,
from Jie Meng.
6) Improve BPF verifier's memory type compatibility for map key/value
arguments, from Dave Marchevsky.
7) Only create mmap-able data section maps in libbpf when data is exposed
via skeletons, from Andrii Nakryiko.
8) Add an autoattach option for bpftool to load all object assets,
from Wang Yufen.
9) Various memory handling fixes for libbpf and BPF selftests,
from Xu Kuohai.
10) Initial support for BPF selftest's vmtest.sh on arm64,
from Manu Bretelle.
11) Improve libbpf's BTF handling to dedup identical structs,
from Alan Maguire.
12) Add BPF CI and denylist documentation for BPF selftests,
from Daniel Müller.
13) Check BPF cpumap max_entries before doing allocation work,
from Florian Lehner.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits)
samples/bpf: Fix typo in README
bpf: Remove the obsolte u64_stats_fetch_*_irq() users.
bpf: check max_entries before allocating memory
bpf: Fix a typo in comment for DFS algorithm
bpftool: Fix spelling mistake "disasembler" -> "disassembler"
selftests/bpf: Fix bpftool synctypes checking failure
selftests/bpf: Panic on hard/soft lockup
docs/bpf: Add documentation for new cgroup local storage
selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x
selftests/bpf: Add selftests for new cgroup local storage
selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str
bpftool: Support new cgroup local storage
libbpf: Support new cgroup local storage
bpf: Implement cgroup storage available to non-cgroup-attached bpf progs
bpf: Refactor some inode/task/sk storage functions for reuse
bpf: Make struct cgroup btf id global
selftests/bpf: Tracing prog can still do lookup under busy lock
selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection
bpf: Add new bpf_task_storage_delete proto with no deadlock detection
bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check
...
====================
Link: https://lore.kernel.org/r/20221102062120.5724-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running the test currently fails on non-SMP systems, despite being
enabled by default. This means that running the test with:
./tools/testing/kunit/kunit.py run --arch x86_64 hw_breakpoint
results in every hw_breakpoint test failing with:
# test_one_cpu: failed to initialize: -22
not ok 1 - test_one_cpu
Instead, use kunit_skip(), which will mark the test as skipped, and give
a more comprehensible message:
ok 1 - test_one_cpu # SKIP not enough cpus
This makes it more obvious that the test is not suited to the test
environment, and so wasn't run, rather than having run and failed.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20221026141040.1609203-1-davidgow@google.com
A common exploit pattern for ROP attacks is to abuse prepare_kernel_cred()
in order to construct escalated privileges[1]. Instead of providing a
short-hand argument (NULL) to the "daemon" argument to indicate using
init_cred as the base cred, require that "daemon" is always set to
an actual task. Replace all existing callers that were passing NULL
with &init_task.
Future attacks will need to have sufficiently powerful read/write
primitives to have found an appropriately privileged task and written it
to the ROP stack as an argument to succeed, which is similarly difficult
to the prior effort needed to escalate privileges before struct cred
existed: locate the current cred and overwrite the uid member.
This has the added benefit of meaning that prepare_kernel_cred() can no
longer exceed the privileges of the init task, which may have changed from
the original init_cred (e.g. dropping capabilities from the bounding set).
[1] https://google.com/search?q=commit_creds(prepare_kernel_cred(0))
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Link: https://lore.kernel.org/r/20221026232943.never.775-kees@kernel.org
If an error (NULL) is returned by krealloc(), callers of realloc_array()
were setting their allocation pointers to NULL, but on error krealloc()
does not touch the original allocation. This would result in a memory
resource leak. Instead, free the old allocation on the error handling
path.
The memory leak information is as follows as also reported by Zhengchao:
unreferenced object 0xffff888019801800 (size 256):
comm "bpf_repo", pid 6490, jiffies 4294959200 (age 17.170s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b211474b>] __kmalloc_node_track_caller+0x45/0xc0
[<0000000086712a0b>] krealloc+0x83/0xd0
[<00000000139aab02>] realloc_array+0x82/0xe2
[<00000000b1ca41d1>] grow_stack_state+0xfb/0x186
[<00000000cd6f36d2>] check_mem_access.cold+0x141/0x1341
[<0000000081780455>] do_check_common+0x5358/0xb350
[<0000000015f6b091>] bpf_check.cold+0xc3/0x29d
[<000000002973c690>] bpf_prog_load+0x13db/0x2240
[<00000000028d1644>] __sys_bpf+0x1605/0x4ce0
[<00000000053f29bd>] __x64_sys_bpf+0x75/0xb0
[<0000000056fedaf5>] do_syscall_64+0x35/0x80
[<000000002bd58261>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: c69431aab6 ("bpf: verifier: Improve function state reallocation")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bill Wendling <morbo@google.com>
Cc: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/bpf/20221029025433.2533810-1-keescook@chromium.org
This is a full revert of commit:
f138918162 ("kallsyms: Take callthunks into account")
The commit assumes a number of things that are not quite right.
Notably it assumes every symbol has PADDING_BYTES in front of it that
are not claimed by another symbol.
This is not true; even when compiled with:
-fpatchable-function-entry=${PADDING_BYTES},${PADDING_BYTES}
Notably things like .cold subfunctions do not need to adhere to this
change in ABI. It it also not true when build with CFI_CLANG, which
claims these PADDING_BYTES in the __cfi_##name symbol.
Once the prefix bytes are not consistent and or otherwise claimed the
approach this patch takes goes out the window and kallsym resolution
will report invalid symbol names.
Therefore revert this to make room for another approach.
Reported-by: Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210241614.2ae4c1f5-yujie.liu@intel.com
Link: https://lkml.kernel.org/r/20221028194453.330970755@infradead.org
At the moment the AMD encrypted platform reserves 6% of RAM for SWIOTLB
or 1GB, whichever is less. However it is possible that there is no block
big enough in the low memory which make SWIOTLB allocation fail and
the kernel continues without DMA. In such case a VM hangs on DMA.
This moves alloc+remap to a helper and calls it from a loop where
the size is halved on each iteration.
This updates default_nslabs on successful allocation which looks like
an oversight as not doing so should have broken callers of
swiotlb_size_or_default().
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20221026123110.331690-1-bigeasy@linutronix.de
6ab428604f ("cgroup: Implement DEBUG_CGROUP_REF") added a config option
which forces cgroup refcnt functions to be not inlined so that they can be
kprobed for debugging. However, it forgot export them when the config is
enabled breaking modules which make use of css reference counting.
Fix it by adding CGROUP_REF_EXPORT() macro to cgroup_refcnt.h which is
defined to EXPORT_SYMBOL_GPL when CONFIG_DEBUG_CGROUP_REF is set.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 6ab428604f ("cgroup: Implement DEBUG_CGROUP_REF")
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
-----BEGIN PGP SIGNATURE-----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=zS3P
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
The commit d583d360a6 ("psi: Fix psi state corruption when schedule()
races with cgroup move") fixed a race problem by making cgroup_move_task()
use task->psi_flags instead of looking at the scheduler state.
We can extend task->psi_flags usage to CPU migration, which should be
a minor optimization for performance and code simplicity.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220926081931.45420-1-zhouchengming@bytedance.com
Psi polling mechanism is trying to minimize the number of wakeups to
run psi_poll_work and is currently relying on timer_pending() to detect
when this work is already scheduled. This provides a window of opportunity
for psi_group_change to schedule an immediate psi_poll_work after
poll_timer_fn got called but before psi_poll_work could reschedule itself.
Below is the depiction of this entire window:
poll_timer_fn
wake_up_interruptible(&group->poll_wait);
psi_poll_worker
wait_event_interruptible(group->poll_wait, ...)
psi_poll_work
psi_schedule_poll_work
if (timer_pending(&group->poll_timer)) return;
...
mod_timer(&group->poll_timer, jiffies + delay);
Prior to 461daba06b we used to rely on poll_scheduled atomic which was
reset and set back inside psi_poll_work and therefore this race window
was much smaller.
The larger window causes increased number of wakeups and our partners
report visible power regression of ~10mA after applying 461daba06b.
Bring back the poll_scheduled atomic and make this race window even
narrower by resetting poll_scheduled only when we reach polling expiration
time. This does not completely eliminate the possibility of extra wakeups
caused by a race with psi_group_change however it will limit it to the
worst case scenario of one extra wakeup per every tracking window (0.5s
in the worst case).
This patch also ensures correct ordering between clearing poll_scheduled
flag and obtaining changed_states using memory barrier. Correct ordering
between updating changed_states and setting poll_scheduled is ensured by
atomic_xchg operation.
By tracing the number of immediate rescheduling attempts performed by
psi_group_change and the number of these attempts being blocked due to
psi monitor being already active, we can assess the effects of this change:
Before the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 684365 1385156 1261240
Immediate reschedules blocked: 682846 1381654 1258682
Immediate reschedules (delta): 1519 3502 2558
Immediate reschedules (% of attempted): 0.22% 0.25% 0.20%
After the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 882244 770298 426218
Immediate reschedules blocked: 881996 769796 426074
Immediate reschedules (delta): 248 502 144
Immediate reschedules (% of attempted): 0.03% 0.07% 0.03%
The number of non-blocked immediate reschedules dropped from 0.22-0.25%
to 0.03-0.07%. The drop is attributed to the decrease in the race window
size and the fact that we allow this race only when psi monitors reach
polling window expiration time.
Fixes: 461daba06b ("psi: eliminate kthread_worker from psi trigger scheduling mechanism")
Reported-by: Kathleen Chang <yt.chang@mediatek.com>
Reported-by: Wenju Xu <wenju.xu@mediatek.com>
Reported-by: Jonathan Chen <jonathan.jmchen@mediatek.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: SH Chen <show-hong.chen@mediatek.com>
Link: https://lore.kernel.org/r/20221028194541.813985-1-surenb@google.com
Pavan reported a problem that PSI avgs_work idle shutoff is not
working at all. Because PSI_NONIDLE condition would be observed in
psi_avgs_work()->collect_percpu_times()->get_recent_times() even if
only the kworker running avgs_work on the CPU.
Although commit 1b69ac6b40 ("psi: fix aggregation idle shut-off")
avoided the ping-pong wake problem when the worker sleep, psi_avgs_work()
still will always re-arm the avgs_work, so shutoff is not working.
This patch changes to use PSI_STATE_RESCHEDULE to flag whether to
re-arm avgs_work in get_recent_times(). For the current CPU, we re-arm
avgs_work only when (NR_RUNNING > 1 || NR_IOWAIT > 0 || NR_MEMSTALL > 0),
for other CPUs we can just check PSI_NONIDLE delta. The new flag
is only used in psi_avgs_work(), so we check in get_recent_times()
that current_work() is avgs_work.
One potential problem is that the brief period of non-idle time
incurred between the aggregation run and the kworker's dequeue will
be stranded in the per-cpu buckets until avgs_work run next time.
The buckets can hold 4s worth of time, and future activity will wake
the avgs_work with a 2s delay, giving us 2s worth of data we can leave
behind when shut off the avgs_work. If the kworker run other works after
avgs_work shut off and doesn't have any scheduler activities for 2s,
this maybe a problem.
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20221014110551.22695-1-zhouchengming@bytedance.com
When a pending event exists and growth is less than the threshold, the
current logic is to skip this trigger without generating event. However,
from e6df4ead85 ("psi: fix possible trigger missing in the window"),
our purpose is to generate event as long as pending event exists and the
rate meets the limit, no matter what growth is.
This patch handles this case properly.
Fixes: e6df4ead85 ("psi: fix possible trigger missing in the window")
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/r/20220919072356.GA29069@haolee.io
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki).
- Allow hybrid sleep to use suspend-to-idle as a system suspend method
if it is the current suspend method of choice (Mario Limonciello).
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla).
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=1teO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
For maps of type BPF_MAP_TYPE_CPUMAP memory is allocated first before
checking the max_entries argument. If then max_entries is greater than
NR_CPUS additional work needs to be done to free allocated memory before
an error is returned.
This changes moves the check on max_entries before the allocation
happens.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Link: https://lore.kernel.org/r/20221028183405.59554-1-dev@der-flo.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It's really difficult to debug when cgroup or css refs leak. Let's add a
debug option to force the refcnt function to not be inlined so that they can
be kprobed for debugging.
Signed-off-by: Tejun Heo <tj@kernel.org>
There is a typo in comment for DFS algorithm in bpf/verifier.c. The top
element should not be popped until all its neighbors have been checked.
Fix it.
Fixes: 475fb78fbf ("bpf: verifier (add branch/goto checks)")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221027034458.2925218-1-xukuohai@huaweicloud.com
Use the event group trees to iterate only perf_tracepoint events.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
There have been various issues and limitations with the way perf uses
(task) contexts to track events. Most notable is the single hardware
PMU task context, which has resulted in a number of yucky things (both
proposed and merged).
Notably:
- HW breakpoint PMU
- ARM big.little PMU / Intel ADL PMU
- Intel Branch Monitoring PMU
- AMD IBS PMU
- S390 cpum_cf PMU
- PowerPC trace_imc PMU
*Current design:*
Currently we have a per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
Each task has an array of pointers to a perf_event_context. Each
perf_event_context has a direct relation to a PMU and a group of
events for that PMU. The task related perf_event_context's have a
pointer back to that task.
Each PMU has a per-cpu pointer to a per-cpu perf_cpu_context, which
includes a perf_event_context, which again has a direct relation to
that PMU, and a group of events for that PMU.
The perf_cpu_context also tracks which task context is currently
associated with that CPU and includes a few other things like the
hrtimer for rotation etc.
Each perf_event is then associated with its PMU and one
perf_event_context.
*Proposed design:*
New design proposed by this patch reduce to a single task context and
a single CPU context but adds some intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
With the new design, perf_event_context will hold all events for all
pmus in the (respective pinned/flexible) rbtrees. This can be achieved
by adding pmu to rbtree key:
{cpu, pmu, cgroup, group_index}
Each perf_event_context carries a list of perf_event_pmu_context which
is used to hold per-pmu-per-context state. For example, it keeps track
of currently active events for that pmu, a pmu specific task_ctx_data,
a flag to tell whether rotation is required or not etc.
Additionally, perf_cpu_pmu_context is used to hold per-pmu-per-cpu
state like hrtimer details to drive the event rotation, a pointer to
perf_event_pmu_context of currently running task and some other
ancillary information.
Each perf_event is associated to it's pmu, perf_event_context and
perf_event_pmu_context.
Further optimizations to current implementation are possible. For
example, ctx_resched() can be optimized to reschedule only single pmu
events.
Much thanks to Ravi for picking this up and pushing it towards
completion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008062424.313-1-ravi.bangoria@amd.com
The do_set_cpus_allowed() function is used by either kthread_bind() or
select_fallback_rq(). In both cases the user affinity (if any) should be
destroyed too.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220922180041.1768141-6-longman@redhat.com
It was found that the user requested affinity via sched_setaffinity()
can be easily overwritten by other kernel subsystems without an easy way
to reset it back to what the user requested. For example, any change
to the current cpuset hierarchy may reset the cpumask of the tasks in
the affected cpusets to the default cpuset value even if those tasks
have pre-existing user requested affinity. That is especially easy to
trigger under a cgroup v2 environment where writing "+cpuset" to the
root cgroup's cgroup.subtree_control file will reset the cpus affinity
of all the processes in the system.
That is problematic in a nohz_full environment where the tasks running
in the nohz_full CPUs usually have their cpus affinity explicitly set
and will behave incorrectly if cpus affinity changes.
Fix this problem by looking at user_cpus_ptr in __set_cpus_allowed_ptr()
and use it to restrcit the given cpumask unless there is no overlap. In
that case, it will fallback to the given one. The SCA_USER flag is
reused to indicate intent to set user_cpus_ptr and so user_cpus_ptr
masking should be skipped. In addition, masking should also be skipped
if any of the SCA_MIGRATE_* flag is set.
All callers of set_cpus_allowed_ptr() will be affected by this change.
A scratch cpumask is added to percpu runqueues structure for doing
additional masking when user_cpus_ptr is set.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220922180041.1768141-4-longman@redhat.com
Unconditionally preserve the user requested cpumask on
sched_setaffinity() calls. This allows using it outside of the fairly
narrow restrict_cpus_allowed_ptr() use-case and fix some cpuset issues
that currently suffer destruction of cpumasks.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220922180041.1768141-3-longman@redhat.com
In order to prepare for passing through additional data through the
affinity call-chains, convert the mask and flags argument into a
structure.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220922180041.1768141-5-longman@redhat.com
affine_move_task() assumes task_rq_lock() has been called and it does
an implicit task_rq_unlock() before returning. Add the appropriate
__releases annotations to make this clear.
A typo error in comment is also fixed.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220922180041.1768141-2-longman@redhat.com
When evaluating the CPU candidates in the perf domain (pd) containing
the previously used CPU (prev_cpu), find_energy_efficient_cpu()
evaluates the energy of the pd:
- without the task (base_energy)
- with the task placed on prev_cpu (if the task fits)
- with the task placed on the CPU with the highest spare capacity,
prev_cpu being excluded from this set
If prev_cpu is already the CPU with the highest spare capacity,
max_spare_cap_cpu will be the CPU with the second highest spare
capacity.
On an Arm64 Juno-r2, with a workload of 10 tasks at a 10% duty cycle,
when prev_cpu and max_spare_cap_cpu are both valid candidates,
prev_spare_cap > max_spare_cap at ~82%.
Thus the energy of the pd when placing the task on max_spare_cap_cpu
is computed with no possible positive outcome 82% most of the time.
Do not consider max_spare_cap_cpu as a valid candidate if
prev_spare_cap > max_spare_cap.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20221006081052.3862167-2-pierre.gondois@arm.com
We do consider thermal pressure in util_fits_cpu() for uclamp_min only.
With the exception of the biggest cores which by definition are the max
performance point of the system and all tasks by definition should fit.
Even under thermal pressure, the capacity of the biggest CPU is the
highest in the system and should still fit every task. Except when it
reaches capacity inversion point, then this is no longer true.
We can handle this by using the inverted capacity as capacity_orig in
util_fits_cpu(). Which not only addresses the problem above, but also
ensure uclamp_max now considers the inverted capacity. Force fitting
a task when a CPU is in this adverse state will contribute to making the
thermal throttling last longer.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-10-qais.yousef@arm.com
Check each performance domain to see if thermal pressure is causing its
capacity to be lower than another performance domain.
We assume that each performance domain has CPUs with the same
capacities, which is similar to an assumption made in energy_model.c
We also assume that thermal pressure impacts all CPUs in a performance
domain equally.
If there're multiple performance domains with the same capacity_orig, we
will trigger a capacity inversion if the domain is under thermal
pressure.
The new cpu_in_capacity_inversion() should help users to know when
information about capacity_orig are not reliable and can opt in to use
the inverted capacity as the 'actual' capacity_orig.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-9-qais.yousef@arm.com
If the utilization of the woken up task is 0, we skip the energy
calculation because it has no impact.
But if the task is boosted (uclamp_min != 0) will have an impact on task
placement and frequency selection. Only skip if the util is truly
0 after applying uclamp values.
Change uclamp_task_cpu() signature to avoid unnecessary additional calls
to uclamp_eff_get(). feec() is the only user now.
Fixes: 732cd75b8c ("sched/fair: Select an energy-efficient CPU on task wake-up")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-8-qais.yousef@arm.com
So that it is now uclamp aware.
This fixes a major problem of busy tasks capped with UCLAMP_MAX keeping
the system in overutilized state which disables EAS and leads to wasting
energy in the long run.
Without this patch running a busy background activity like JIT
compilation on Pixel 6 causes the system to be in overutilized state
74.5% of the time.
With this patch this goes down to 9.79%.
It also fixes another problem when long running tasks that have their
UCLAMP_MIN changed while running such that they need to upmigrate to
honour the new UCLAMP_MIN value. The upmigration doesn't get triggered
because overutilized state never gets set in this state, hence misfit
migration never happens at tick in this case until the task wakes up
again.
Fixes: af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-7-qais.yousef@arm.com
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.
Fixes: b4c9c9f156 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-6-qais.yousef@arm.com
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
Fixes: b4c9c9f156 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-5-qais.yousef@arm.com
As reported by Yun Hsiang [1], if a task has its uclamp_min >= 0.8 * 1024,
it'll always pick the previous CPU because fits_capacity() will always
return false in this case.
The new util_fits_cpu() logic should handle this correctly for us beside
more corner cases where similar failures could occur, like when using
UCLAMP_MAX.
We open code uclamp_rq_util_with() except for the clamp() part,
util_fits_cpu() needs the 'raw' values to be passed to it.
Also introduce uclamp_rq_{set, get}() shorthand accessors to get uclamp
value for the rq. Makes the code more readable and ensures the right
rules (use READ_ONCE/WRITE_ONCE) are respected transparently.
[1] https://lists.linaro.org/pipermail/eas-dev/2020-July/001488.html
Fixes: 1d42509e47 ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Reported-by: Yun Hsiang <hsiang023167@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-4-qais.yousef@arm.com
So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.
Fixes: a7008c07a5 ("sched/fair: Make task_fits_capacity() consider uclamp restrictions")
Co-developed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-3-qais.yousef@arm.com
fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.
But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.
Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.
Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.
What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.
For example, task p:
p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024
Will fit a big CPU. But
p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024
will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.
Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:
p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)
Should fit the task on medium cpus without triggering overutilized
state.
Inlined comments expand more on desired behavior in more scenarios.
Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.
Fixes: af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-2-qais.yousef@arm.com
Use atomic_try_cmpxchg() instead of atomic_cmpxchg (*ptr, old, new) ==
old in static_key_slow_inc_cpuslocked(). x86 CMPXCHG instruction
returns success in ZF flag, so this change saves a compare after
cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_try_cmpxchg() implicitly assigns old *ptr value to "old" when
cmpxchg fails, enabling further code simplifications.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221019140850.3395-1-ubizjak@gmail.com
Since commit 838d9bb62d ("perf: Use sample_flags for raw_data")
raw data is not being output on tracepoints due to the PERF_SAMPLE_RAW
field not being set. Fix this by setting it for tracepoint events.
This fixes the following test failure:
perf test "sched_switch" -vvv
35: Track with sched_switch
--- start ---
test child forked, pid 1828
...
Using CPUID 0x00000000410fd400
sched_switch: cpu: 2 prev_tid -14687 next_tid 0
sched_switch: cpu: 2 prev_tid -14687 next_tid 0
Missing sched_switch events
4613 events recorded
test child finished with -1
---- end ----
Track with sched_switch: FAILED!
Fixes: 838d9bb62d ("perf: Use sample_flags for raw_data")
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221012143857.48198-1-james.clark@arm.com
We already ported most parts and filesystems over for v6.0 to the new
vfs{g,u}id_t type and associated helpers for v6.0. Convert the remaining
places so we can remove all the old helpers.
This is a non-functional change.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Similar to sk/inode/task storage, implement similar cgroup local storage.
There already exists a local storage implementation for cgroup-attached
bpf programs. See map type BPF_MAP_TYPE_CGROUP_STORAGE and helper
bpf_get_local_storage(). But there are use cases such that non-cgroup
attached bpf progs wants to access cgroup local storage data. For example,
tc egress prog has access to sk and cgroup. It is possible to use
sk local storage to emulate cgroup local storage by storing data in socket.
But this is a waste as it could be lots of sockets belonging to a particular
cgroup. Alternatively, a separate map can be created with cgroup id as the key.
But this will introduce additional overhead to manipulate the new map.
A cgroup local storage, similar to existing sk/inode/task storage,
should help for this use case.
The life-cycle of storage is managed with the life-cycle of the
cgroup struct. i.e. the storage is destroyed along with the owning cgroup
with a call to bpf_cgrp_storage_free() when cgroup itself
is deleted.
The userspace map operations can be done by using a cgroup fd as a key
passed to the lookup, update and delete operations.
Typically, the following code is used to get the current cgroup:
struct task_struct *task = bpf_get_current_task_btf();
... task->cgroups->dfl_cgrp ...
and in structure task_struct definition:
struct task_struct {
....
struct css_set __rcu *cgroups;
....
}
With sleepable program, accessing task->cgroups is not protected by rcu_read_lock.
So the current implementation only supports non-sleepable program and supporting
sleepable program will be the next step together with adding rcu_read_lock
protection for rcu tagged structures.
Since map name BPF_MAP_TYPE_CGROUP_STORAGE has been used for old cgroup local
storage support, the new map name BPF_MAP_TYPE_CGRP_STORAGE is used
for cgroup storage available to non-cgroup-attached bpf programs. The old
cgroup storage supports bpf_get_local_storage() helper to get the cgroup data.
The new cgroup storage helper bpf_cgrp_storage_get() can provide similar
functionality. While old cgroup storage pre-allocates storage memory, the new
mechanism can also pre-allocate with a user space bpf_map_update_elem() call
to avoid potential run-time memory allocation failure.
Therefore, the new cgroup storage can provide all functionality w.r.t.
the old one. So in uapi bpf.h, the old BPF_MAP_TYPE_CGROUP_STORAGE is alias to
BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED to indicate the old cgroup storage can
be deprecated since the new one can provide the same functionality.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042850.673791-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor codes so that inode/task/sk storage implementation
can maximally share the same code. I also added some comments
in new function bpf_local_storage_unlink_nolock() to make
codes easy to understand. There is no functionality change.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042845.672944-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make struct cgroup btf id global so later patch can reuse
the same btf id.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042840.672602-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_lsm and bpf_iter do not recur that will cause a deadlock.
The situation is similar to the bpf_pid_task_storage_delete_elem()
which is called from the syscall map_delete_elem. It does not need
deadlock detection. Otherwise, it will cause unnecessary failure
when calling the bpf_task_storage_delete() helper.
This patch adds bpf_task_storage_delete proto that does not do deadlock
detection. It will be used by bpf_lsm and bpf_iter program.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to the earlier change in bpf_task_storage_get_recur.
This patch changes bpf_task_storage_delete_recur such that it
does the lookup first. It only returns -EBUSY if it needs to
take the spinlock to do the deletion when potential deadlock
is detected.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_lsm and bpf_iter do not recur that will cause a deadlock.
The situation is similar to the bpf_pid_task_storage_lookup_elem()
which is called from the syscall map_lookup_elem. It does not need
deadlock detection. Otherwise, it will cause unnecessary failure
when calling the bpf_task_storage_get() helper.
This patch adds bpf_task_storage_get proto that does not do deadlock
detection. It will be used by bpf_lsm and bpf_iter programs.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_task_storage_get() does a lookup and optionally inserts
new data if BPF_LOCAL_STORAGE_GET_F_CREATE is present.
During lookup, it will cache the lookup result and caching requires to
acquire a spinlock. When potential deadlock is detected (by the
bpf_task_storage_busy pcpu-counter added in
commit bc235cdb42 ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")),
the current behavior is returning NULL immediately to avoid deadlock. It is
too pessimistic. This patch will go ahead to do a lookup (which is a
lockless operation) but it will avoid caching it in order to avoid
acquiring the spinlock.
When lookup fails to find the data and BPF_LOCAL_STORAGE_GET_F_CREATE
is set, an insertion is needed and this requires acquiring a spinlock.
This patch will still return NULL when a potential deadlock is detected.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch creates a new function __bpf_task_storage_get() and
moves the core logic of the existing bpf_task_storage_get()
into this new function. This new function will be shared
by another new helper proto in the latter patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds the "_recur" naming to the bpf_task_storage_{get,delete}
proto. In a latter patch, they will only be used by the tracing
programs that requires a deadlock detection because a tracing
prog may use bpf_task_storage_{get,delete} recursively and cause a
deadlock.
Another following patch will add a different helper proto for the non
tracing programs because they do not need the deadlock prevention.
This patch does this rename to prepare for this future proto
additions.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 64696c40d0 ("bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline")
removed prog->active check for struct_ops prog. The bpf_lsm
and bpf_iter is also using trampoline. Like struct_ops, the bpf_lsm
and bpf_iter have fixed hooks for the prog to attach. The
kernel does not call the same hook in a recursive way.
This patch also removes the prog->active check for
bpf_lsm and bpf_iter.
A later patch has a test to reproduce the recursion issue
for a sleepable bpf_lsm program.
This patch appends the '_recur' naming to the existing
enter and exit functions that track the prog->active counter.
New __bpf_prog_{enter,exit}[_sleepable] function are
added to skip the prog->active tracking. The '_struct_ops'
version is also removed.
It also moves the decision on picking the enter and exit function to
the new bpf_trampoline_{enter,exit}(). It returns the '_recur' ones
for all tracing progs to use. For bpf_lsm, bpf_iter,
struct_ops (no prog->active tracking after 64696c40d0), and
bpf_lsm_cgroup (no prog->active tracking after 69fd337a97),
it will return the functions that don't track the prog->active.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing a time namespace requires remapping a vvar page, so we don't want
to allow doing that if any other tasks can use the same mm.
Currently, we install a time namespace when a task is created with a new
vm. exec() is another case when a task gets a new mm and so it can switch
a time namespace safely, but it isn't handled now.
One more issue of the current interface is that clone() with CLONE_VM isn't
allowed if the current task has unshared a time namespace
(timens_for_children doesn't match the current timens).
Both these issues make some inconvenience for users. For example, Alexey
and Florian reported that posix_spawn() uses vfork+exec and this pattern
doesn't work with time namespaces due to the both described issues.
LXC needed to workaround the exec() issue by calling setns.
In the commit 133e2d3e81 ("fs/exec: allow to unshare a time namespace on
vfork+exec"), we tried to fix these issues with minimal impact on UAPI. But
it adds extra complexity and some undesirable side effects. Eric suggested
fixing the issues properly because here are all the reasons to suppose that
there are no users that depend on the old behavior.
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Origin-author: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220921003120.209637-1-avagin@google.com
Currently we allow to create kprobe multi link on function from kernel
module, but we don't take the module reference to ensure it's not
unloaded while we are tracing it.
The multi kprobe link is based on fprobe/ftrace layer which takes
different approach and releases ftrace hooks when module is unloaded
even if there's tracer registered on top of it.
Adding code that gathers all the related modules for the link and takes
their references before it's attached. All kernel module references are
released after link is unregistered.
Note that we do it the same way already for trampoline probes
(but for single address).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Renaming __bpf_kprobe_multi_cookie_cmp to bpf_kprobe_multi_addrs_cmp,
because it's more suitable to current and upcoming code.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently ftrace_lookup_symbols iterates only over core symbols,
adding module_kallsyms_on_each_symbol call to check on modules
symbols as well.
Also removing 'args.found == args.cnt' condition, because it's
already checked in kallsyms_callback function.
Also removing 'err < 0' check, because both *kallsyms_on_each_symbol
functions do not return error.
Reported-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Making module_kallsyms_on_each_symbol generally available, so it
can be used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS and CONFIG_MODULES
options are defined).
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.
Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.
Fixes: 81d45bdf89 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dD6N
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
This pull request contains a commit that fixes bf95b2bc3e ("rcu: Switch
polled grace-period APIs to ->gp_seq_polled"), which could incorrectly
leave interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order to
properly interact with polled grace periods, but the code did not take
into account the possibility of synchronize_rcu() being invoked from
the portion of the boot sequence during which interrupts are disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore.
-----BEGIN PGP SIGNATURE-----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=o6hI
-----END PGP SIGNATURE-----
Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"Fix a regression caused by commit bf95b2bc3e ("rcu: Switch polled
grace-period APIs to ->gp_seq_polled"), which could incorrectly leave
interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order
to properly interact with polled grace periods, but the code did not
take into account the possibility of synchronize_rcu() being invoked
from the portion of the boot sequence during which interrupts are
disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore"
* tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Keep synchronize_rcu() from enabling irqs in early boot
-----BEGIN PGP SIGNATURE-----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=eV7W
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2022-10-23
We've added 7 non-merge commits during the last 18 day(s) which contain
a total of 8 files changed, 69 insertions(+), 5 deletions(-).
The main changes are:
1) Wait for busy refill_work when destroying bpf memory allocator, from Hou.
2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David.
3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri.
4) Prevent decl_tag from being referenced in func_proto, from Stanislav.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
bpf: Fix dispatcher patchable function entry to 5 bytes nop
bpf: prevent decl_tag from being referenced in func_proto
selftests/bpf: Add reproducer for decl_tag in func_proto return type
selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1
bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1
====================
Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once upon at it was used on hot paths, but that had not been
true since 2013. IOW, there's no point for arch-optimized
equivalent of task_pt_regs(current) - remaining two users are
not worth bothering with.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
-----BEGIN PGP SIGNATURE-----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=DXG7
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
After the previous patch, which added PTR_TO_MEM | MEM_ALLOC type
map_key_value_types, the only difference between map_key_value_types and
mem_types sets is PTR_TO_BUF and PTR_TO_MEM, which are in the latter set
but not the former.
Helpers which expect ARG_PTR_TO_MAP_KEY or ARG_PTR_TO_MAP_VALUE
already effectively expect a valid blob of arbitrary memory that isn't
necessarily explicitly associated with a map. When validating a
PTR_TO_MAP_{KEY,VALUE} arg, the verifier expects meta->map_ptr to have
already been set, either by an earlier ARG_CONST_MAP_PTR arg, or custom
logic like that in process_timer_func or process_kptr_func.
So let's get rid of map_key_value_types and just use mem_types for those
args.
This has the effect of adding PTR_TO_BUF and PTR_TO_MEM to the set of
compatible types for ARG_PTR_TO_MAP_KEY and ARG_PTR_TO_MAP_VALUE.
PTR_TO_BUF is used by various bpf_iter implementations to represent a
chunk of valid r/w memory in ctx args for iter prog.
PTR_TO_MEM is used by networking, tracing, and ringbuf helpers to
represent a chunk of valid memory. The PTR_TO_MEM | MEM_ALLOC
type added in previous commit is specific to ringbuf helpers.
Presence or absence of MEM_ALLOC doesn't change the validity of using
PTR_TO_MEM as a map_{key,val} input.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221020160721.4030492-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds support for the following pattern:
struct some_data *data = bpf_ringbuf_reserve(&ringbuf, sizeof(struct some_data, 0));
if (!data)
return;
bpf_map_lookup_elem(&another_map, &data->some_field);
bpf_ringbuf_submit(data);
Currently the verifier does not consider bpf_ringbuf_reserve's
PTR_TO_MEM | MEM_ALLOC ret type a valid key input to bpf_map_lookup_elem.
Since PTR_TO_MEM is by definition a valid region of memory, it is safe
to use it as a key for lookups.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221020160721.4030492-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Except for waiting_for_gp list, there are no concurrent operations on
free_by_rcu, free_llist and free_llist_extra lists, so use
__llist_del_all() instead of llist_del_all(). waiting_for_gp list can be
deleted by RCU callback concurrently, so still use llist_del_all().
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221021114913.60508-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A busy irq work is an unfinished irq work and it can be either in the
pending state or in the running state. When destroying bpf memory
allocator, refill_work may be busy for PREEMPT_RT kernel in which irq
work is invoked in a per-CPU RT-kthread. It is also possible for kernel
with arch_irq_work_has_interrupt() being false (e.g. 1-cpu arm32 host or
mips) and irq work is inovked in timer interrupt.
The busy refill_work leads to various issues. The obvious one is that
there will be concurrent operations on free_by_rcu and free_list between
irq work and memory draining. Another one is call_rcu_in_progress will
not be reliable for the checking of pending RCU callback because
do_call_rcu() may have not been invoked by irq work yet. The other is
there will be use-after-free if irq work is freed before the callback
of irq work is invoked as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 12ab94067 P4D 12ab94067 PUD 1796b4067 PMD 0
Oops: 0010 [#1] PREEMPT_RT SMP
CPU: 5 PID: 64 Comm: irq_work/5 Not tainted 6.0.0-rt11+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffadc080293e78 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffffcdc07fb6a388 RCX: ffffa05000a2e000
RDX: ffffa05000a2e000 RSI: ffffffff96cc9827 RDI: ffffcdc07fb6a388
......
Call Trace:
<TASK>
irq_work_single+0x24/0x60
irq_work_run_list+0x24/0x30
run_irq_workd+0x23/0x30
smpboot_thread_fn+0x203/0x300
kthread+0x126/0x150
ret_from_fork+0x1f/0x30
</TASK>
Considering the ease of concurrency handling, no overhead for
irq_work_sync() under non-PREEMPT_RT kernel and has-irq-work-interrupt
kernel and the short wait time used for irq_work_sync() under PREEMPT_RT
(When running two test_maps on PREEMPT_RT kernel and 72-cpus host, the
max wait time is about 8ms and the 99th percentile is 10us), just using
irq_work_sync() to wait for busy refill_work to complete before memory
draining and memory freeing.
Fixes: 7c8199e24f ("bpf: Introduce any context BPF specific memory allocator.")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221021114913.60508-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
post-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY1IgYgAKCRDdBJ7gKXxA
jpyRAQDkfa1LDkfbA4dQBZShkUhBX1k3AyRO1NWMjwwTxP3H8wD9HUz1BB3ynoKc
ipzQs7q5jbBvndczEksHiG2AC7SvQAI=
=wD9I
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morron:
"Seventeen hotfixes, mainly for MM.
Five are cc:stable and the remainder address post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nouveau: fix migrate_to_ram() for faulting page
mm/huge_memory: do not clobber swp_entry_t during THP split
hugetlb: fix memory leak associated with vma_lock structure
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
mm: /proc/pid/smaps_rollup: fix maple tree search
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
mm/mmap: fix MAP_FIXED address return on VMA merge
mm/mmap.c: __vma_adjust(): suppress uninitialized var warning
mm/mmap: undo ->mmap() when mas_preallocate() fails
init: Kconfig: fix spelling mistake "satify" -> "satisfy"
ocfs2: clear dinode links count in case of error
ocfs2: fix BUG when iput after ocfs2_mknod fails
gcov: support GCC 12.1 and newer compilers
zsmalloc: zs_destroy_pool: add size_class NULL check
mm/mempolicy: fix mbind_range() arguments to vma_merge()
mailmap: update email for Qais Yousef
mailmap: update Dan Carpenter's email address
Currently the NMI safety debugging is only performed on architectures
that don't support NMI-safe this_cpu_inc().
Reorder the code so that other architectures like x86 also detect bad
uses.
[ paulmck: Apply kernel test robot, Stephen Rothwell, and Zqiang feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tell about the need to protect against concurrent updaters who may
overflow the GP counter behind the current update.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Using the NMI-unsafe reader API from within an NMI handler is very likely
to be buggy for three reasons:
1) NMIs aren't strictly re-entrant (a pending nested NMI will execute at
the end of the current one) so it should be fine to use a non-atomic
increment here. However, breakpoints can still interrupt NMIs and if
a breakpoint callback has a reader on that same ssp, a racy increment
can happen.
2) If the only reader site for a given srcu_struct structure is in an
NMI handler, then RCU should be used instead of SRCU.
3) Because of the previous reason (2), an srcu_struct structure having
an SRCU read side critical section in an NMI handler is likely to
have another one from a task context.
For all these reasons, warn if an NMI-unsafe reader API is used from an
NMI handler.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Running rcutorture with non-zero fqs_duration module parameter in a
kernel built with CONFIG_PREEMPTION=y results in the following splat:
BUG: using __this_cpu_read() in preemptible [00000000]
code: rcu_torture_fqs/398
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 398 Comm: rcu_torture_fqs Not tainted 6.0.0-rc1-yoctodev-standard+
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x86
dump_stack+0x10/0x16
check_preemption_disabled+0xe5/0xf0
__this_cpu_preempt_check+0x13/0x20
rcu_force_quiescent_state.part.0+0x1c/0x170
rcu_force_quiescent_state+0x1e/0x30
rcu_torture_fqs+0xca/0x160
? rcu_torture_boost+0x430/0x430
kthread+0x192/0x1d0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
The problem is that rcu_force_quiescent_state() uses __this_cpu_read()
in preemptible code instead of the proper raw_cpu_read(). This commit
therefore changes __this_cpu_read() to raw_cpu_read().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a few words to the informative message that appears
every ten seconds in RCU Tasks and RCU Tasks Trace grace periods.
This message currently reads as follows:
rcu_tasks_wait_gp: rcu_tasks grace period 1046 is 10088 jiffies old.
After this change, it provides additional context, instead reading
as follows:
rcu_tasks_wait_gp: rcu_tasks grace period number 1046 (since boot) is 10088 jiffies old.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The commit 3fcd6a230f ("x86/cpu: Avoid cpuinfo-induced IPIing of
idle CPUs") introduced rcu_is_idle_cpu() in order to identify the
current CPU idle state. But commit f3eca381bd ("x86/aperfmperf:
Replace arch_freq_get_on_cpu()") switched to using MAX_SAMPLE_AGE,
so rcu_is_idle_cpu() is no longer used. This commit therefore removes it.
Fixes: f3eca381bd ("x86/aperfmperf: Replace arch_freq_get_on_cpu()")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
a) [gcov: Use system IO buffering]
(23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
the format are in bytes and not in words (4B)
b) [gcov: make profile merging smarter]
(72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
file header.
Tested with GCC 7.5, 10.4, 12.2 and the current master.
Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The patchable_function_entry(5) might output 5 single nop
instructions (depends on toolchain), which will clash with
bpf_arch_text_poke check for 5 bytes nop instruction.
Adding early init call for dispatcher that checks and change
the patchable entry into expected 5 nop instruction if needed.
There's no need to take text_mutex, because we are using it
in early init call which is called at pre-smp time.
Fixes: ceea991a01 ("bpf: Move bpf_dispatcher function out of ftrace locations")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018075934.574415-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Making polled RCU grace periods account for expedited grace periods
required acquiring the leaf rcu_node structure's lock during early boot,
but after rcu_init() was called. This lock is irq-disabled, but the
code incorrectly assumes that irqs are always disabled when invoking
synchronize_rcu(). The exception is early boot before the scheduler has
started, which means that upon return from synchronize_rcu(), irqs will
be incorrectly enabled.
This commit fixes this bug by using irqsave/irqrestore locking primitives.
Fixes: bf95b2bc3e ("rcu: Switch polled grace-period APIs to ->gp_seq_polled")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives globally, but based
on the per-CPU data. These global checks are made by the grace-period
code that must scan the srcu_data structures anyway, and are done only
in kernels built with CONFIG_PROVE_RCU=y.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives on a per-CPU basis.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
As previous commit, 'blk_trace_cleanup' will stop block trace if
block trace's state is 'Blktrace_running'.
So remove unnessary stop block trace in 'blk_trace_shutdown'.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-4-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: ioctl(sda, BLKTRACESETUP, &arg)
Got issue as follows:
debugfs: File 'dropped' in directory 'sda' already present!
debugfs: File 'msg' in directory 'sda' already present!
debugfs: File 'trace0' in directory 'sda' already present!
And also find syzkaller report issue like "KASAN: use-after-free Read in relay_switch_subbuf"
"https://syzkaller.appspot.com/bug?id=13849f0d9b1b818b087341691be6cc3ac6a6bfb7"
If remove block trace without stop(BLKTRACESTOP) block trace, '__blk_trace_remove'
will just set 'q->blk_trace' with NULL. However, debugfs file isn't removed, so
will report file already present when call BLKTRACESETUP.
static int __blk_trace_remove(struct request_queue *q)
{
struct blk_trace *bt;
bt = rcu_replace_pointer(q->blk_trace, NULL,
lockdep_is_held(&q->debugfs_mutex));
if (!bt)
return -EINVAL;
if (bt->trace_state != Blktrace_running)
blk_trace_cleanup(q, bt);
return 0;
}
If do test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: remove sda
There will remove debugfs directory which will remove recursively all file
under directory.
>> blk_release_queue
>> debugfs_remove_recursive(q->debugfs_dir)
So all files which created in 'do_blk_trace_setup' are removed, and
'dentry->d_inode' is NULL. But 'q->blk_trace' is still in 'running_trace_lock',
'trace_note_tsk' will traverse 'running_trace_lock' all nodes.
>>trace_note_tsk
>> trace_note
>> relay_reserve
>> relay_switch_subbuf
>> d_inode(buf->dentry)->i_size
To solve above issues, reference commit '5afedf670caf', call 'blk_trace_cleanup'
unconditionally in '__blk_trace_remove' and first stop block trace in
'blk_trace_cleanup'.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-3-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY08JQQAKCRDbK58LschI
g0M0AQCWGrJcnQFut1qwR9efZUadwxtKGAgpaA/8Smd8+v7c8AD/SeHQuGfkFiD6
rx18hv1mTfG0HuPnFQy6YZQ98vmznwE=
=DaeS
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With Clang version 16+, -fsanitize=thread will turn
memcpy/memset/memmove calls in instrumented functions into
__tsan_memcpy/__tsan_memset/__tsan_memmove calls respectively.
Add these functions to the core KCSAN runtime, so that we (a) catch data
races with mem* functions, and (b) won't run into linker errors with
such newer compilers.
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET case of rcu_torture_writer()
to verify that the value of NUM_ACTIVE_RCU_POLL_OLDSTATE is sufficiently
large
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET_FULL case
of rcu_torture_writer() to verify that the value of
NUM_ACTIVE_RCU_POLL_FULL_OLDSTATE is sufficiently large.
[ paulmck: Fix whitespace issue located by checkpatch.pl. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In preparation for RCU lazy changes, wake up the RCU nocb gp thread if
needed after an entrain. This change prevents the RCU barrier callback
from waiting in the queue for several seconds before the lazy callbacks
in front of it are serviced.
Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the bypass cblist gets too big or its timeout has occurred, it is
flushed into the main cblist. However, the bypass timer is still running
and the behavior is that it would eventually expire and wake the GP
thread.
Since we are going to use the bypass cblist for lazy CBs, do the wakeup
soon as the flush for "too big or too long" bypass list happens.
Otherwise, long delays can happen for callbacks which get promoted from
lazy to non-lazy.
This is a good thing to do anyway (regardless of future lazy patches),
since it makes the behavior consistent with behavior of other code paths
where flushing into the ->cblist makes the GP kthread into a
non-sleeping state quickly.
[ Frederic Weisbecker: Changes to avoid unnecessary GP-thread wakeups plus
comment changes. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In kernels built with either CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y or
CONFIG_NO_HZ_FULL=y, additional CPUs must be added to rcu_nocb_mask.
Except that kernels booted without the rcu_nocbs= will not have
allocated rcu_nocb_mask. And the current rcu_init_nohz() function uses
its need_rcu_nocb_mask and offload_all local variables to track the
rcu_nocb and nohz_full state.
But there is a much simpler approach, namely creating a cpumask pointer
to track the default and then using cpumask_available() to check the
rcu_nocb_mask state. This commit takes this approach, thereby simplifying
and shortening the rcu_init_nohz() function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rnp->qsmask is locklessly accessed from rcutree_dying_cpu(). This
may help avoid load tearing due to concurrent access, KCSAN
issues, and preserve sanity of people reading the mask in tracing.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once either rcutree_online_cpu() or rcutree_dead_cpu() is invoked
concurrently, the following rcu_boost_kthread_setaffinity() race can
occur:
CPU 1 CPU2
mask = rcu_rnp_online_cpus(rnp);
...
mask = rcu_rnp_online_cpus(rnp);
...
set_cpus_allowed_ptr(t, cm);
set_cpus_allowed_ptr(t, cm);
This results in CPU2's update being overwritten by that of CPU1, and
thus the possibility of ->boost_kthread_task continuing to run on a
to-be-offlined CPU.
This commit therefore eliminates this race by relying on the pre-existing
acquisition of ->boost_kthread_mutex to serialize the full process of
changing the affinity of ->boost_kthread_task.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_report_dead() function invokes rcu_report_exp_rdp() in order
to force an immediate expedited quiescent state on the outgoing
CPU, and then it invokes rcu_preempt_deferred_qs() to provide any
required deferred quiescent state of either sort. Because the call to
rcu_preempt_deferred_qs() provides the expedited RCU quiescent state if
requested, the call to rcu_report_exp_rdp() is potentially redundant.
One possible issue is a concurrent start of a new expedited RCU
grace period, but this situation is already handled correctly
by __sync_rcu_exp_select_node_cpus(). This function will detect
that the CPU is going offline via the error return from its call
to smp_call_function_single(). In that case, it will retry, and
eventually stop retrying due to rcu_report_exp_rdp() clearing the
->qsmaskinitnext bit corresponding to the target CPU. As a result,
__sync_rcu_exp_select_node_cpus() will report the necessary quiescent
state after dealing with any remaining CPU.
This change assumes that control does not enter rcu_report_dead() within
an RCU read-side critical section, but then again, the surviving call
to rcu_preempt_deferred_qs() has always made this assumption.
This commit therefore removes the call to rcu_report_exp_rdp(), thus
relying on rcu_preempt_deferred_qs() to handle both normal and expedited
quiescent states.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
NMI-safe variants of srcu_read_lock() and srcu_read_unlock() are needed
by printk(), which on many architectures entails read-modify-write
atomic operations. This commit prepares Tree SRCU for this change by
making both ->srcu_lock_count and ->srcu_unlock_count by atomic_long_t.
[ paulmck: Apply feedback from John Ogness. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
To support both sleepable and normal uprobe bpf program, the freeing of
trace program array chains a RCU-tasks-trace grace period and a normal
RCU grace period one after the other.
With the introduction of rcu_trace_implies_rcu_gp(),
__bpf_prog_array_free_sleepable_cb() can check whether or not a normal
RCU grace period has also passed after a RCU-tasks-trace grace period
has passed. If it is true, it is safe to invoke kfree() directly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Local storage map is accessible for both sleepable and non-sleepable bpf
program, and its memory is freed by using both call_rcu_tasks_trace() and
kfree_rcu() to wait for both RCU-tasks-trace grace period and RCU grace
period to pass.
With the introduction of rcu_trace_implies_rcu_gp(), both
bpf_selem_free_rcu() and bpf_local_storage_free_rcu() can check whether
or not a normal RCU grace period has also passed after a RCU-tasks-trace
grace period has passed. If it is true, it is safe to call kfree()
directly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The memory free logic in bpf memory allocator chains a RCU Tasks Trace
grace period and a normal RCU grace period one after the other, so it
can ensure that both sleepable and non-sleepable programs have finished.
With the introduction of rcu_trace_implies_rcu_gp(),
__free_rcu_tasks_trace() can check whether or not a normal RCU grace
period has also passed after a RCU Tasks Trace grace period has passed.
If it is true, freeing these elements directly, else freeing through
call_rcu().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period. However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident. Code relying on this accident
must call this function to verify that this accident is still happening.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The calculation results of the variables 'func_addr' and 'func_size' are
not affected by the for loop and do not change due to the changes of
entries[i]. The performance can be improved by moving it outside the loop.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Fix a recent regression where a sleeping kernfs function is called with
css_set_lock (spinlock) held.
* Revert the commit to enable cgroup1 support for cgroup_get_from_fd/file().
Multiple users assume that the lookup only works for cgroup2 and breaks
when fed a cgroup1 file. Instead, introduce a separate set of functions to
lookup both v1 and v2 and use them where the user explicitly wants to
support both versions.
* Compat update for tools/perf/util/bpf_skel/bperf_cgroup.bpf.c.
* Add Josef Bacik as a blkcg maintainer.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY03MlA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGTkUAQD7fNcSPuc2m/BvW+gySKQkp9PZMA6E6yOIqirc
QKmIgwEAwWECW7RR1alhOGD50RtYkuYVsLD1+6Ka4eMHe+EhwA4=
=kGLI
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a recent regression where a sleeping kernfs function is called
with css_set_lock (spinlock) held
- Revert the commit to enable cgroup1 support for cgroup_get_from_fd/file()
Multiple users assume that the lookup only works for cgroup2 and
breaks when fed a cgroup1 file. Instead, introduce a separate set of
functions to lookup both v1 and v2 and use them where the user
explicitly wants to support both versions.
- Compat update for tools/perf/util/bpf_skel/bperf_cgroup.bpf.c.
- Add Josef Bacik as a blkcg maintainer.
* tag 'cgroup-for-6.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: Update MAINTAINERS entry
mm: cgroup: fix comments for get from fd/file helpers
perf stat: Support old kernels for bperf cgroup counting
bpf: cgroup_iter: support cgroup1 using cgroup fd
cgroup: add cgroup_v1v2_get_from_[fd/file]()
Revert "cgroup: enable cgroup_get_from_file() on cgroup1"
cgroup: Reorganize css_set_lock and kernfs path processing
audit_filter_uring(), audit_filter_inode_name() are substantially
similar to audit_filter_syscall(). Move the core logic to
__audit_filter_op() which can be parametrized for all three.
On a Skylakex system, getpid() latency (all results aggregated
across 12 boot cycles):
Min Mean Median Max pstdev
(ns) (ns) (ns) (ns)
- 196.63 207.86 206.60 230.98 (+- 3.92%)
+ 183.73 196.95 192.31 232.49 (+- 6.04%)
Performance counter stats for 'bin/getpid' (3 runs) go from:
cycles 805.58 ( +- 4.11% )
instructions 1654.11 ( +- .05% )
IPC 2.06 ( +- 3.39% )
branches 430.02 ( +- .05% )
branch-misses 1.55 ( +- 7.09% )
L1-dcache-loads 440.01 ( +- .09% )
L1-dcache-load-misses 9.05 ( +- 74.03% )
to:
cycles 765.37 ( +- 6.66% )
instructions 1677.07 ( +- 0.04% )
IPC 2.20 ( +- 5.90% )
branches 431.10 ( +- 0.04% )
branch-misses 1.60 ( +- 11.25% )
L1-dcache-loads 521.04 ( +- 0.05% )
L1-dcache-load-misses 6.92 ( +- 77.60% )
(Both aggregated over 12 boot cycles.)
The increased L1-dcache-loads are due to some intermediate values now
coming from the stack.
The improvement in cycles is due to a slightly denser loop (the list
parameter in the list_for_each_entry_rcu() exit check now comes from
a register rather than a constant as before.)
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
ctx->major contains the current syscall number. This is, of course, a
constant for the duration of the syscall. Unfortunately, GCC's alias
analysis cannot prove that it is not modified via a pointer in the
audit_filter_syscall() loop, and so always loads it from memory.
In and of itself the load isn't very expensive (ops dependent on the
ctx->major load are only used to determine the direction of control flow
and have short dependence chains and, in any case the related branches
get predicted perfectly in the fastpath) but still cache ctx->major
in a local for two reasons:
* ctx->major is in the first cacheline of struct audit_context and has
similar alignment as audit_entry::list audit_entry. For cases
with a lot of audit rules, doing this reduces one source of contention
from a potentially busy cache-set.
* audit_in_mask() (called in the hot loop in audit_filter_syscall())
does cast manipulation and error checking on ctx->major:
audit_in_mask(const struct audit_krule *rule, unsigned long val):
if (val > 0xffffffff)
return false;
word = AUDIT_WORD(val);
if (word >= AUDIT_BITMASK_SIZE)
return false;
bit = AUDIT_BIT(val);
return rule->mask[word] & bit;
The clauses related to the rule need to be evaluated in the loop, but
the rest is unnecessarily re-evaluated for every loop iteration.
(Note, however, that most of these are cheap ALU ops and the branches
are perfectly predicted. However, see discussion on cycles
improvement below for more on why it is still worth hoisting.)
On a Skylakex system change in getpid() latency (aggregated over
12 boot cycles):
Min Mean Median Max pstdev
(ns) (ns) (ns) (ns)
- 201.30 216.14 216.22 228.46 (+- 1.45%)
+ 196.63 207.86 206.60 230.98 (+- 3.92%)
Performance counter stats for 'bin/getpid' (3 runs) go from:
cycles 836.89 ( +- .80% )
instructions 2000.19 ( +- .03% )
IPC 2.39 ( +- .83% )
branches 430.14 ( +- .03% )
branch-misses 1.48 ( +- 3.37% )
L1-dcache-loads 471.11 ( +- .05% )
L1-dcache-load-misses 7.62 ( +- 46.98% )
to:
cycles 805.58 ( +- 4.11% )
instructions 1654.11 ( +- .05% )
IPC 2.06 ( +- 3.39% )
branches 430.02 ( +- .05% )
branch-misses 1.55 ( +- 7.09% )
L1-dcache-loads 440.01 ( +- .09% )
L1-dcache-load-misses 9.05 ( +- 74.03% )
(Both aggregated over 12 boot cycles.)
instructions: we reduce around 8 instructions/iteration because some of
the computation is now hoisted out of the loop (branch count does not
change because GCC, for reasons unclear, only hoists the computations
while keeping the basic-blocks.)
cycles: improve by about 5% (in aggregate and looking at individual run
numbers.) This is likely because we now waste fewer pipeline resources
on unnecessary instructions which allows the control flow to
speculatively execute further ahead shortening the execution of the loop
a little. The final gating factor on the performance of this loop
remains the long dependence chain due to the linked-list load.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce distinct struct balance_callback instead of performing function
pointer casting which will trip CFI. Avoids warnings as found by Clang's
future -Wcast-function-type-strict option:
In file included from kernel/sched/core.c:84:
kernel/sched/sched.h:1755:15: warning: cast from 'void (*)(struct rq *)' to 'void (*)(struct callback_head *)' converts to incompatible function type [-Wcast-function-type-strict]
head->func = (void (*)(struct callback_head *))func;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No binary differences result from this change.
This patch is a cleanup based on Brad Spengler/PaX Team's modifications
to sched code in their last public patch of grsecurity/PaX based on my
understanding of the code. Changes or omissions from the original code
are mine and don't reflect the original grsecurity/PaX code.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Link: https://lkml.kernel.org/r/20221008000758.2957718-1-keescook@chromium.org
In commit 97886d9dcd ("sched: Migration changes for core scheduling"),
sched_group_cookie_match() was added to help determine if a cookie
matches the core state.
However, while it iterates the SMT group, it fails to actually use the
RQ for each of the CPUs iterated, use cpu_rq(cpu) instead of rq to fix
things.
Fixes: 97886d9dcd ("sched: Migration changes for core scheduling")
Signed-off-by: Lin Shengwang <linshengwang1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008022709.642-1-linshengwang1@huawei.com
Since ftrace has trampolines, don't use thunks for the __fentry__ site
but instead require that every function called from there includes
accounting. This very much includes all the direct-call functions.
Additionally, ftrace uses ROP tricks in two places:
- return_to_handler(), and
- ftrace_regs_caller() when pt_regs->orig_ax is set by a direct-call.
return_to_handler() already uses a retpoline to replace an
indirect-jump to defeat IBT, since this is a jump-type retpoline, make
sure there is no accounting done and ALTERNATIVE the RET into a ret.
ftrace_regs_caller() does much the same and gets the same treatment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.927545073@infradead.org
Since the pre-symbol function padding is an integral part of the
symbol make kallsyms report it as part of the symbol by reporting it
as sym-x instead of prev_sym+y.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.409656012@infradead.org
When indirect calls are switched to direct calls then it has to be ensured
that the call target is not the function, but the call thunk when call
depth tracking is enabled. But static calls are available before call
thunks have been set up.
Ensure a second run through the static call patching code after call thunks
have been created. When call thunks are not enabled this has no side
effects.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.306100465@infradead.org
* Raw data is also filled by bpf_perf_event_output.
* Add sample_flags to indicate raw data.
* This eliminates the segfaults as shown below:
Run ./samples/bpf/trace_output
BUG pid 9 cookie 1001000000004 sized 4
BUG pid 9 cookie 1001000000004 sized 4
BUG pid 9 cookie 1001000000004 sized 4
Segmentation fault (core dumped)
Fixes: 838d9bb62d ("perf: Use sample_flags for raw_data")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20221007081327.1047552-1-sumanthk@linux.ibm.com
Marco reported:
Due to the implementation of how SIGTRAP are delivered if
perf_event_attr::sigtrap is set, we've noticed 3 issues:
1. Missing SIGTRAP due to a race with event_sched_out() (more
details below).
2. Hardware PMU events being disabled due to returning 1 from
perf_event_overflow(). The only way to re-enable the event is
for user space to first "properly" disable the event and then
re-enable it.
3. The inability to automatically disable an event after a
specified number of overflows via PERF_EVENT_IOC_REFRESH.
The worst of the 3 issues is problem (1), which occurs when a
pending_disable is "consumed" by a racing event_sched_out(), observed
as follows:
CPU0 | CPU1
--------------------------------+---------------------------
__perf_event_overflow() |
perf_event_disable_inatomic() |
pending_disable = CPU0 | ...
| _perf_event_enable()
| event_function_call()
| task_function_call()
| /* sends IPI to CPU0 */
<IPI> | ...
__perf_event_enable() +---------------------------
ctx_resched()
task_ctx_sched_out()
ctx_sched_out()
group_sched_out()
event_sched_out()
pending_disable = -1
</IPI>
<IRQ-work>
perf_pending_event()
perf_pending_event_disable()
/* Fails to send SIGTRAP because no pending_disable! */
</IRQ-work>
In the above case, not only is that particular SIGTRAP missed, but also
all future SIGTRAPs because 'event_limit' is not reset back to 1.
To fix, rework pending delivery of SIGTRAP via IRQ-work by introduction
of a separate 'pending_sigtrap', no longer using 'event_limit' and
'pending_disable' for its delivery.
Additionally; and different to Marco's proposed patch:
- recognise that pending_disable effectively duplicates oncpu for
the case where it is set. As such, change the irq_work handler to
use ->oncpu to target the event and use pending_* as boolean toggles.
- observe that SIGTRAP targets the ctx->task, so the context switch
optimization that carries contexts between tasks is invalid. If
the irq_work were delayed enough to hit after a context switch the
SIGTRAP would be delivered to the wrong task.
- observe that if the event gets scheduled out
(rotation/migration/context-switch/...) the irq-work would be
insufficient to deliver the SIGTRAP when the event gets scheduled
back in (the irq-work might still be pending on the old CPU).
Therefore have event_sched_out() convert the pending sigtrap into a
task_work which will deliver the signal at return_to_user.
Fixes: 97ba62b278 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Debugged-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Marco Elver <elver@google.com>
Debugged-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Replace the obsolete and ambiguous macro in_irq() with new
macro in_hardirq().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20221012012629.334966-1-ye.xingchen@zte.com.cn
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
- Various performance optimizations, resulting in a 4%-9% speedup
in the mmtests/config-scheduler-perfpipe micro-benchmark.
- New interface to turn PSI on/off on a per cgroup level.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=91tB
-----END PGP SIGNATURE-----
Merge tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PSI updates from Ingo Molnar:
- Various performance optimizations, resulting in a 4%-9% speedup in
the mmtests/config-scheduler-perfpipe micro-benchmark.
- New interface to turn PSI on/off on a per cgroup level.
* tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Per-cgroup PSI accounting disable/re-enable interface
sched/psi: Cache parent psi_group to speed up group iteration
sched/psi: Consolidate cgroup_psi()
sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure
sched/psi: Remove NR_ONCPU task accounting
sched/psi: Optimize task switch inside shared cgroups again
sched/psi: Move private helpers to sched/stats.h
sched/psi: Save percpu memory when !psi_cgroups_enabled
sched/psi: Don't create cgroup PSI files when psi_disabled
sched/psi: Fix periodic aggregation shut off
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does not
make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY0c6GBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpDNAQCuw9YTeNMU4zxFqBg4/JCbfpnWQGj4
Qdl2u3WtEvTzrgEA85Q01swCYRKdrGPCrFemZ3lm6PGzpGruh+BfD4qRMwk=
=F5kK
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does
not make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix reading strings from synthetic events
tracing: Add "(fault)" name injection to kernel probes
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
ring-buffer: Fix kernel-doc
ftrace: Fix char print issue in print_ip_ins()
The bpf_user_ringbuf_drain() helper function allows a BPF program to
specify a callback that is invoked when draining entries from a
BPF_MAP_TYPE_USER_RINGBUF ring buffer map. The API is meant to allow the
callback to return 0 if it wants to continue draining samples, and 1 if
it's done draining. Unfortunately, bpf_user_ringbuf_drain() landed shortly
after commit 1bfe26fb08 ("bpf: Add verifier support for custom
callback return range"), which changed the default behavior of callbacks
to only support returning 0.
This patch corrects that oversight by allowing bpf_user_ringbuf_drain()
callbacks to return 0 or 1. A follow-on patch will update the
user_ringbuf selftests to also return 1 from a bpf_user_ringbuf_drain()
callback to prevent this from regressing in the future.
Fixes: 2057156738 ("bpf: Add bpf_user_ringbuf_drain() helper")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012232015.1510043-2-void@manifault.com
- Valentin Schneider makes crash-kexec work properly when invoked from
an NMI-time panic.
- ntfs bugfixes from Hawkins Jiawei
- Jiebin Sun improves IPC msg scalability by replacing atomic_t's with
percpu counters.
- nilfs2 cleanups from Minghao Chi
- lots of other single patches all over the tree!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0Yf0gAKCRDdBJ7gKXxA
joapAQDT1d1zu7T8yf9cQXkYnZVuBKCjxKE/IsYvqaq1a42MjQD/SeWZg0wV05B8
DhJPj9nkEp6R3Rj3Mssip+3vNuceAQM=
=lUQY
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
The follow commands caused a crash:
# cd /sys/kernel/tracing
# echo 's:open char file[]' > dynamic_events
# echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger'
# echo 1 > events/synthetic/open/enable
BOOM!
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
Now the above can show:
packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr
in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp
packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr
Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7c ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7c ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The functions:
fetch_store_strlen_user()
fetch_store_strlen()
fetch_store_string_user()
fetch_store_string()
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7c ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Core code:
- Provide a generic wrapper which can be utilized in drivers to handle
the problem of force threaded demultiplex interrupts on RT enabled
kernels. This avoids conditionals and horrible quirks in drivers all
over the place.
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe.
- Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation.
- Make irqchip_init() available for pure ACPI based systems.
- Provide a functional DT binding for the Realtek RTL interrupt chip.
- The usual DT updates and small code improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=2ok5
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead.
kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead.
kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2340
Link: https://lkml.kernel.org/r/20221009020642.12506-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When ftrace bug happened, following log shows every hex data in
problematic ip address:
actual: ffffffe8:6b:ffffffd9:01:21
But so many 'f's seem a little confusing, and that is because format
'%x' being used to print signed chars in array 'ins'. As suggested
by Joe, change to use format "%*phC" to print array 'ins'.
After this patch, the log is like:
actual: e8:6b:d9:01:21
Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com
Fixes: 6c14133d2d ("ftrace: Do not blindly read the ip address in ftrace_bug()")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix the documentation comments for cgroup_[v1v2_]get_from_[fd/file]().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
linux/sched/mm.h is included more than once.
Link: https://lkml.kernel.org/r/20220912071556.16811-1-xu.panda@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Use cgroup_v1v2_get_from_fd() in cgroup_iter to support attaching to
both cgroup v1 and v2 using fds.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add cgroup_v1v2_get_from_fd() and cgroup_v1v2_get_from_file() that
support both cgroup1 and cgroup2.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Improve the way how the state of glocks is reported in debugfs
for glocks which are not held by processes, but rather by other
resouces like cached inodes or flocks.
-----BEGIN PGP SIGNATURE-----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=FORZ
-----END PGP SIGNATURE-----
Merge tag 'gfs2-nopid-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 debugfs updates from Andreas Gruenbacher:
- Improve the way how the state of glocks is reported in debugfs for
glocks which are not held by processes, but rather by other resouces
like cached inodes or flocks.
* tag 'gfs2-nopid-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Mark the remaining process-independent glock holders as GL_NOPID
gfs2: Mark flock glock holders as GL_NOPID
gfs2: Add GL_NOPID flag for process-independent glock holders
gfs2: Add flocks to glockfd debugfs file
gfs2: Add glockfd debugfs file
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
This reverts commit f3a2aebdd6.
The commit enabled looking up v1 cgroups via cgroup_get_from_file().
However, there are multiple users, including CLONE_INTO_CGROUP, which have
been assuming that it would only look up v2 cgroups. Returning v1 cgroups
breaks them.
Let's revert the commit and retry later with a separate lookup interface
which allows both v1 and v2.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/000000000000385cbf05ea3f1862@google.com
Cc: Yosry Ahmed <yosryahmed@google.com>
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=c13m
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
The commit 74e4b956eb incorrectly wrapped kernfs_walk_and_get
(might_sleep) under css_set_lock (spinlock). css_set_lock is needed by
__cset_cgroup_from_root to ensure stable cset->cgrp_links but not for
kernfs_walk_and_get.
We only need to make sure that the returned root_cgrp won't be freed
under us. This is given in the case of global root because it is static
(cgrp_dfl_root.cgrp). When the root_cgrp is lower in the hierarchy, it
is pinned by cgroup_ns->root_cset (and `current` task cannot switch
namespace asynchronously so ns_proxy pins cgroup_ns).
Note this reasoning won't hold for root cgroups in v1 hierarchies,
therefore create a special-cased helper function just for the default
hierarchy.
Fixes: 74e4b956eb ("cgroup: Honor caller's cgroup NS when resolving path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
From Phil Auld:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
From me:
cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
From me:
lib: optimize find_bit() functions
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
From me:
lib/find: add find_nth_bit()
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
From me:
cpumask: repair cpumask_check()
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
From Valentin Schneider:
bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
Extends the API with one more function and applies it in sched/core.
-----BEGIN PGP SIGNATURE-----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=Q/+F
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is
more than just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through
a cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to
avoid retpolines.
- Add a way to wake up ring buffer waiters waiting for the
ring buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled.
A reader may block when the ring buffer is disabled,
but if it was blocked when the ring buffer is disabled
it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages
Fixes splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer
wait queue actually the longest.
- Fix a race in the ring buffer between resetting a page when
a writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at
boot up before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when
enabling a tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- And other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYz70cxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpLKAP4+yOje7ZY/b3R4tTx0EIWiKdhqPx6t
Nvam2+WR2PN3QQEAqiK2A+oIbh3Zjp1MyhQWuulssWKtSTXhIQkbs7ioYAc=
=MsQw
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is more than
just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through a
cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to avoid
retpolines.
- Add a way to wake up ring buffer waiters waiting for the ring
buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled. A reader may
block when the ring buffer is disabled, but if it was blocked when
the ring buffer is disabled it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages. This fixes
splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer wait
queue actually the longest.
- Fix a race in the ring buffer between resetting a page when a
writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at boot up
before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when enabling a
tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- Other minor clean ups and fixes"
* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
ftrace: Create separate entry in MAINTAINERS for function hooks
tracing: Update MAINTAINERS to reflect new tracing git repo
tracing: Do not free snapshot if tracer is on cmdline
ftrace: Still disable enabled records marked as disabled
tracing/user_events: Move pages/locks into groups to prepare for namespaces
tracing: Add Masami Hiramatsu as co-maintainer
tracing: Remove unused variable 'dups'
MAINTAINERS: add myself as a tracing reviewer
ring-buffer: Fix race between reset page and reading page
tracing/user_events: Update ABI documentation to align to bits vs bytes
tracing/user_events: Use bits vs bytes for enabled status page data
tracing/user_events: Use refcount instead of atomic for ref tracking
tracing/user_events: Ensure user provided strings are safely formatted
tracing/user_events: Use WRITE instead of READ for io vector import
tracing/user_events: Use NULL for strstr checks
tracing: Fix spelling mistake "preapre" -> "prepare"
tracing: Wake up waiters when tracing is disabled
tracing: Add ioctl() to force ring buffer waiters to wake up
tracing: Wake up ring buffer waiters on closing of the file
ring-buffer: Add ring_buffer_wake_waiters()
...
Just some boring cleanups on the sysctl front for this release.
This has been on linux-next for at least 4 weeks now.
-----BEGIN PGP SIGNATURE-----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=TEFw
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Just some boring cleanups on the sysctl front for this release"
* tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred}
kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c
sysctl: remove max_extfrag_threshold
kernel/sysctl.c: remove unnecessary (void*) conversions
proc: remove initialization assignment
This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 99bd995655 ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's only two pathes queued up for v6.1 for modules, these have
been grinding on linux-next for at least 4 weeks now:
* David Disseldorp's minor enhancement for sysfs compression string
* Aaron Tomlin's debugfs interface to view unloaded tainted modules
But there are other changes queued up for testing for the next merge
window already. One change being still discussed, and *not* yet even close
to testing on linux-next, but worth mentioning to put on your radar is
the generalization of the bpf prog_pack thing. The idea with that is to
generalize the iTLB gains seen with using huge pages on eBPF to other text
uses on the kernel (modules, ftrace, kprobes). Song Liu is doing a good job
following up on that difficult task as the semantics for the special
permissions are crap, and it really hasn't been easy to put all this
together. The latest effort can be read on his vmalloc_exec() patch
series [0].
Aaron will have a fix posted soon for the debugfs interface for unloaded
modules, when that comes I'll just bounce that to you as it should be
merged.
[0] https://lkml.kernel.org/r/20220818224218.2399791-1-song@kernel.org
-----BEGIN PGP SIGNATURE-----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=g/mg
-----END PGP SIGNATURE-----
Merge tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
- minor enhancement for sysfs compression string (David Disseldorp)
- debugfs interface to view unloaded tainted modules (Aaron Tomlin)
* tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module/decompress: generate sysfs string at compile time
module: Add debugfs interface to view unloaded tainted modules
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc. in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing particular
sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
-----BEGIN PGP SIGNATURE-----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=DHiN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
-----BEGIN PGP SIGNATURE-----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=+qS1
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Fix race between fork and livepatch transition revert
- Add sysfs entry that shows "patched" state for each object (module)
that can be livepatched by the given livepatch
- Some clean up
* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add sysfs test
livepatch: add sysfs entry "patched" for each klp_object
selftests/livepatch: normalize sysctl error message
livepatch: Add a missing newline character in klp_module_coming()
livepatch: fix race between fork and KLP transition
-----BEGIN PGP SIGNATURE-----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=xERg
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Initialize pointer hashing using the system workqueue. It avoids
taking locks in printk()/vsprintf() code path
- Misc code clean up
* tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Mark __printk percpu data ready __ro_after_init
printk: Remove bogus comment vs. boot consoles
printk: Remove write only variable nr_ext_console_drivers
printk: Declare log_wait properly
printk: Make pr_flush() static
lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.
lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().
lib/vnsprintf: add const modifier for param 'bitmap'
* cpuset now support isolated cpus.partition type, which will enable dynamic
CPU isolation.
* pids.peak added to remember the max number of pids used.
* Holes in cgroup namespace plugged.
* Internal cleanups.
Note that for-6.1-fixes was pulled into for-6.1 twice. Both were for
follow-up cleanups and each merge commit has details.
Also, 8a693f7766 ("cgroup: Remove CFTYPE_PRESSURE") removes the flag used
by PSI changes in the tip tree and the merged result won't compile due to
the missing flag. Simply removing the struct init lines specifying the flag
is the correct resolution. linux-next already contains the correct fix:
https://lkml.kernel.org/r/20220912161812.072aaa3b@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYzsl7w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYsxAP4kad4YPw+CueLyyEMiYgBHouqDt8cG0+FJWK3X
svTC7wD/eCLfxZM8TjjSrMmvaMrml586mr3NoQaFeW0x3twptQQ=
=LERu
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
-----BEGIN PGP SIGNATURE-----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=KGwF
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Huawei reported that when they updated their kernel from 4.4 to
something much newer, some userspace code they had broke, the culprit
being the accidental removal of O_NONBLOCK from /dev/random way back
in 5.6. It's been gone for over 2 years now and this is the first
we've heard of it, but userspace breakage is userspace breakage, so
O_NONBLOCK is now back.
- Use randomness from hardware RNGs much more often during early boot,
at the same interval that crng reseeds are done, from Dominik.
- A semantic change in hardware RNG throttling, so that the hwrng
framework can properly feed random.c with randomness from hardware
RNGs that aren't specifically marked as creditable.
A related patch coming to you via Herbert's hwrng tree depends on
this one, not to compile, but just to function properly, so you may
want to merge this PULL before that one.
- A fix to clamp credited bits from the interrupts pool to the size of
the pool sample. This is mainly just a theoretical fix, as it'd be
pretty hard to exceed it in practice.
- Oracle reported that InfiniBand TCP latency regressed by around
10-15% after a change a few cycles ago made at the request of the RT
folks, in which we hoisted a somewhat rare operation (1 in 1024
times) out of the hard IRQ handler and into a workqueue, a pretty
common and boring pattern.
It turns out, though, that scheduling a worker from there has
overhead of its own, whereas scheduling a timer on that same CPU for
the next jiffy amortizes better and doesn't incur the same overhead.
I also eliminated a cache miss by moving the work_struct (and
subsequently, the timer_list) to below a critical cache line, so that
the more critical members that are accessed on every hard IRQ aren't
split between two cache lines.
- The boot-time initialization of the RNG has been split into two
approximate phases: what we can accomplish before timekeeping is
possible and what we can accomplish after.
This winds up being useful so that we can use RDRAND to seed the RNG
before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
addition to other early uses of randomness. The effect is that
systems with RDRAND (or a bootloader seed) will never see any
warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
kfence benefits from getting a better seed of its own.
- Small systems without much entropy sometimes wind up putting some
truncated serial number read from flash into hostname, so contribute
utsname changes to the RNG, without crediting.
- Add smaller batches to serve requests for smaller integers, and make
use of them when people ask for random numbers bounded by a given
compile-time constant. This has positive effects all over the tree,
most notably in networking and kfence.
- The original jitter algorithm intended (I believe) to schedule the
timer for the next jiffy, not the next-next jiffy, yet it used
mod_timer(jiffies + 1), which will fire on the next-next jiffy,
instead of what I believe was intended, mod_timer(jiffies), which
will fire on the next jiffy. So fix that.
- Fix a comment typo, from William.
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: clear new batches when bringing new CPUs online
random: fix typos in get_random_bytes() comment
random: schedule jitter credit for next jiffy, not in two jiffies
prandom: make use of smaller types in prandom_u32_max
random: add 8-bit and 16-bit batches
utsname: contribute changes to RNG
random: use init_utsname() instead of utsname()
kfence: use better stack hash seed
random: split initialization into early step and later step
random: use expired timer rather than wq for mixing fast pool
random: avoid reading two cache lines on irq randomness
random: clamp credited irq bits to maximum mixed
random: throttle hwrng writes if no entropy is credited
random: use hwgenerator randomness more frequently at early boot
random: restore O_NONBLOCK support
- Disable preemption in rwsem_write_trylock()'s attempt to
take the rwsem, to avoid RT tasks hogging the CPU, which
managed to preempt this function after the owner has
been cleared but before a new owner is set. Also add
debug checks to enforce this.
- Add __lockfunc to more slow path functions and add
__sched to semaphore functions.
- Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
toggles are disabled, to reduce LTO text size.
- Print more debug information when lockdep gets confused
in look_up_lock_class().
- Improve header file abuse checks.
- Misc cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=we4n
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Disable preemption in rwsem_write_trylock()'s attempt to take the
rwsem, to avoid RT tasks hogging the CPU, which managed to preempt
this function after the owner has been cleared but before a new owner
is set. Also add debug checks to enforce this.
- Add __lockfunc to more slow path functions and add __sched to
semaphore functions.
- Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
toggles are disabled, to reduce LTO text size.
- Print more debug information when lockdep gets confused in
look_up_lock_class().
- Improve header file abuse checks.
- Misc cleanups
* tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused
locking: Add __sched to semaphore functions
locking/rwsem: Disable preemption while trying for rwsem lock
locking: Detect includes rwlock.h outside of spinlock.h
locking: Add __lockfunc to slow path functions
locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled
selftests: futex: Fix 'the the' typo in comment
- PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2)
feature support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information,
if available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on
AMD CPUs by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
- HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs and
thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot()
and fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LcGg
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:
- Fix a memory leak in APEI by avoiding to add do not add task_work to
kernel threads running when an asynchronous error is detected (Shuai
Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
* acpi-apei:
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
* acpi-wakeup:
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
* acpi-reboot:
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
* acpi-thermal:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
After the ucount rlimit code was merged a bunch of small but
siginificant bugs were found and fixed. At the time it was realized
that part of the problem was that while the ucount rlimits were very
similar to the oridinary ucounts (in being nested counts with limits)
the semantics were slightly different and the code would be less error
prone if there was less sharing. This is the long awaited cleanup
that should hopefully keep things more comprehensible and less error
prone for whoever needs to touch that code next.
Alexey Gladkov (1):
ucounts: Split rlimit and ucount values and max values
fs/exec.c | 2 +-
fs/proc/array.c | 2 +-
include/linux/user_namespace.h | 35 ++++++++++++++++++++++-------------
kernel/fork.c | 12 ++++++------
kernel/sys.c | 2 +-
kernel/ucount.c | 34 +++++++++++++++-------------------
kernel/user_namespace.c | 10 +++++-----
7 files changed, 51 insertions(+), 46 deletions(-)
-----BEGIN PGP SIGNATURE-----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=kjVh
-----END PGP SIGNATURE-----
Merge tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts update from Eric Biederman:
"Split rlimit and ucount values and max values
After the ucount rlimit code was merged a bunch of small but
siginificant bugs were found and fixed. At the time it was realized
that part of the problem was that while the ucount rlimits were very
similar to the oridinary ucounts (in being nested counts with limits)
the semantics were slightly different and the code would be less error
prone if there was less sharing.
This is the long awaited cleanup that should hopefully keep things
more comprehensible and less error prone for whoever needs to touch
that code next"
* tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Split rlimit and ucount values and max values
Recently I had a conversation where it was pointed out to me that
SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
difficult for a tracer to handle.
Keeping SIGKILL working after the process has been killed is pain
from an implementation point of view.
So since the debuggers don't want this behavior let's see if we can
remove this wart for the userspace API
If a regression is detected it should only need to be the last change
that is the reverted. The other two are just general cleanups that
make the last patch simpler.
Eric W. Biederman (3):
signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit
signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
signal: Drop signals received after a fatal signal has been processed
fs/coredump.c | 2 +-
include/linux/sched/signal.h | 1 +
kernel/exit.c | 20 +++++++++++++++++++-
kernel/fork.c | 2 ++
kernel/signal.c | 3 ++-
5 files changed, 25 insertions(+), 3 deletions(-)
-----BEGIN PGP SIGNATURE-----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=gX4y
-----END PGP SIGNATURE-----
Merge tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace update from Eric Biederman:
"ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT
Recently I had a conversation where it was pointed out to me that
SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
difficult for a tracer to handle.
Keeping SIGKILL working after the process has been killed is pain from
an implementation point of view.
So since the debuggers don't want this behavior let's see if we can
remove this wart for the userspace API
If a regression is detected it should only need to be the last change
that is the reverted. The other two are just general cleanups that
make the last patch simpler"
* tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Drop signals received after a fatal signal has been processed
signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit
This is a small tweak to kthread_stop so it breaks out of
interruptible waits, that don't explicitly test for kthread_stop.
These interruptible waits occassionaly occur in kernel threads do to
code sharing.
Jason A. Donenfeld (1):
signal: break out of wait loops on kthread_stop()
kernel/kthread.c | 1 +
1 file changed, 1 insertion(+)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEgjlraLDcwBA2B+6cC/v6Eiajj0AFAmM7U4sACgkQC/v6Eiaj
j0Di4Q/+KVI0l+QyKXK9tFnZnH0NEMzv1UsexkwmBIz0mKTCzmfeNIqBerxNBD0q
YJ1xE2SvZB93w1KKZ2U5R+7ktRx7KDYUnko9voB0zK+2Tk1julKtfUyY0ly3GQTS
GOMwJG3N/bxzxJjXlNNPOL8dILua0RPtD3vmkUpybDu3OJycNXVL0AVL8I4frkpH
myMCdckXWWDkKGI87i6Pjn6nuEhN4z8CpjZBeEWPpLLyqD10CKN9B4zbHhAbFinB
BkDu4TB+CPSXc4YOMTyLgvMnD4FyyI7SroxIaF1O8GhDztEYTbqKpRpVyLfhiIbi
YAdAFJFJpCKvNTNzYcMYiZ9uCWLnmyPo6LpZNEgLfMyVIr0dRUS9bd/KzoLTz8KE
gK3B2OfzorSqHjTPt0kcs9hTepSjqcMfeuvGDSz/8bCiTRRBlKay16F3v+sSAVQ0
0bknG7bPsQQzkkdgBqu78kP2lt182z8dGI9DXmrp6/FFsD1SgFcG9AEPPFkLCRL8
TmKRgnFDuwJuQ5zC6ITOgsH53F5xDVEVImnMwNbmjx0oSQoUsf0CgBfyM03UKwX0
OOQbIK+eE8cj0lC4R7iMg2M6ATj7qQf65AEx480+cgX/kpJMzwCTvf20sRKes02L
HQEIn8nz+IBvR4v031IjhjWTGbrT4dPh4G7gTHRaPc7UzqzshB8=
=tVlW
-----END PGP SIGNATURE-----
Merge tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread update from Eric Biederman:
"Break out of wait loops on kthread_stop()
This is a small tweak to kthread_stop so it breaks out of
interruptible waits, that don't explicitly test for kthread_stop.
These interruptible waits occassionaly occur in kernel threads do to
code sharing"
* tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: break out of wait loops on kthread_stop()
Resolves a conflict in gfs2_inode_lookup() between the following commits:
gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes
gfs2: Mark the remaining process-independent glock holders as GL_NOPID
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Here is the big set of driver core and debug printk changes for 6.1-rc1.
Included in here is:
- dynamic debug updates for the core and the drm subsystem. The
drm changes have all been acked by the relevant maintainers.
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they
were not being used and they really did not actually do
anything.)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BYUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylozwCdFRlcghaf7XBUyNgRZRwMC+oQI8EAn1G/nEDE
6aFd2er41uK0IGQnSmYO
=OK0k
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to
finally get this work done
- tty serial transmit cleanups in various drivers in preparation
for more cleanup and unification in future releases (that work
was not ready for this release.)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full
details in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BSdA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylucQCfaXIrYuh2AHcb6+G+Nqp1xD2BYaEAoIdLyOCA
a2yziLrDF6us2oav6j4x
=Wv+X
-----END PGP SIGNATURE-----
Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM67XkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpiHoD/9eN+6YnNRPu5+2zeGnnm1Nlwic6YMZeORr
KFIeC0COMWoFhNBIPFkgAKT+0qIH+uGt5UsHSM3Y5La7wMR8yLxD4PAnvTZ/Ijtt
yxVIOmonJoQ0OrQ2kTbvDXL/9OCUrzwXXyUIEPJnH0Ca1mxeNOgDHbE7VGF6DMul
0D3pI8qs2WLnHlDi1V/8kH5qZ6WoAJSDcb8sTzOUVnyveZPNaZhGQJuHA2XAYMtg
fqKMDJqgmNk6jdTMUgdF5B+rV64PQoCy28I7fXqGkEe+RE5TBy57vAa0XY84V8XR
/a8CEuwMts2ypk1hIcJG8Vv8K6u5war9yPM5MTngKsoMpzNIlhrhaJQVyjKdcs+E
Ixwzexu6xTYcrcq+mUARgeTh79FzTBM/uXEdbCG2G3S6HPd6UZWUJZGfxw/l0Aem
V4xB7lj6SQaJDU1iJCYUaHcekNXhQAPvyVG+R2ED1SO3McTpTPIM1aeigxw6vj7u
bH3Kfdr94Z8HNuoLuiS6YYfjNt2Shf4LEB6GxKJ9TYHtyhdOyO0H64jGHpygrWqN
cSnkWPUqUUNpF7srKM0ZgbliCshvmyJc4aMOFd0gBY/kXf5J/j7IXvh8TFCi9rHH
0KyZH3/3Zsu9geUn3ynznlr4FXU+BcqE6boaa/iWb9sN1m+Rvaahv8cSch/dh44a
vQNj/iOBQA==
=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
This removes the second use of the sched_core_mask temporary mask.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the
snapshot buffer at boot up for use later. The ftrace_boot_snapshot in
particular requires the snapshot to be allocated because it will take a
snapshot at the end of boot up allowing to see the traces that happened
during boot so that it's not lost when user space takes over.
When a tracer is registered (started) there's a path that checks if it
requires the snapshot buffer or not, and if it does not and it was
allocated it will do a synchronization and free the snapshot buffer.
This is only required if the previous tracer was using it for "max
latency" snapshots, as it needs to make sure all max snapshots are
complete before freeing. But this is only needed if the previous tracer
was using the snapshot buffer for latency (like irqoff tracer and
friends). But it does not make sense to free it, if the previous tracer
was not using it, and the snapshot was allocated by the cmdline
parameters. This basically takes away the point of allocating it in the
first place!
Note, the allocated snapshot worked fine for just trace events, but fails
when a tracer is enabled on the cmdline.
Further investigation, this goes back even further and it does not require
a tracer on the cmdline to fail. Simply enable snapshots and then enable a
tracer, and it will remove the snapshot.
Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 45ad21ca55 ("tracing: Have trace_array keep track if snapshot buffer is allocated")
Reported-by: Ross Zwisler <zwisler@kernel.org>
Tested-by: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Weak functions started causing havoc as they showed up in the
"available_filter_functions" and this confused people as to why some
functions marked as "notrace" were listed, but when enabled they did
nothing. This was because weak functions can still have fentry calls, and
these addresses get added to the "available_filter_functions" file.
kallsyms is what converts those addresses to names, and since the weak
functions are not listed in kallsyms, it would just pick the function
before that.
To solve this, there was a trick to detect weak functions listed, and
these records would be marked as DISABLED so that they do not get enabled
and are mostly ignored. As the processing of the list of all functions to
figure out what is weak or not can take a long time, this process is put
off into a kernel thread and run in parallel with the rest of start up.
Now the issue happens whet function tracing is enabled via the kernel
command line. As it starts very early in boot up, it can be enabled before
the records that are weak are marked to be disabled. This causes an issue
in the accounting, as the weak records are enabled by the command line
function tracing, but after boot up, they are not disabled.
The ftrace records have several accounting flags and a ref count. The
DISABLED flag is just one. If the record is enabled before it is marked
DISABLED it will get an ENABLED flag and also have its ref counter
incremented. After it is marked for DISABLED, neither the ENABLED flag nor
the ref counter is cleared. There's sanity checks on the records that are
performed after an ftrace function is registered or unregistered, and this
detected that there were records marked as ENABLED with ref counter that
should not have been.
Note, the module loading code uses the DISABLED flag as well to keep its
functions from being modified while its being loaded and some of these
flags may get set in this process. So changing the verification code to
ignore DISABLED records is a no go, as it still needs to verify that the
module records are working too.
Also, the weak functions still are calling a trampoline. Even though they
should never be called, it is dangerous to leave these weak functions
calling a trampoline that is freed, so they should still be set back to
nops.
There's two places that need to not skip records that have the ENABLED
and the DISABLED flags set. That is where the ftrace_ops is processed and
sets the records ref counts, and then later when the function itself is to
be updated, and the ENABLED flag gets removed. Add a helper function
"skip_record()" that returns true if the record has the DISABLED flag set
but not the ENABLED flag.
Link: https://lkml.kernel.org/r/20221005003809.27d2b97b@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: b39181f7c6 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
-----BEGIN PGP SIGNATURE-----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=52r/
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Six audit patches for v6.1, most are pretty trivial, but a quick list
of the highlights are below:
- Only free the audit proctitle information on task exit. This allows
us to cache the information and improve performance slightly.
- Use the time_after() macro to do time comparisons instead of doing
it directly and potentially causing ourselves problems when the
timer wraps.
- Convert an audit_context state comparison from a relative enum
comparison, e.g. (x < y), to a not-equal comparison to ensure that
we are not caught out at some unknown point in the future by an
enum shuffle.
- A handful of small cleanups such as tidying up comments and
removing unused declarations"
* tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove selinux_audit_rule_update() declaration
audit: use time_after to compare time
audit: free audit_proctitle only on task exit
audit: explicitly check audit_context->context enum value
audit: audit_context pid unused, context enum comment fix
audit: fix repeated words in comments
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Perf fuzzer gifted a lockdep splat:
perf_event_init_context()
mutex_lock(parent_ctx->mutex); (B)
inherit_task_group()
inherit_group()
inherit_event()
perf_event_alloc()
perf_try_init_event() := hw_breakpoint_event_init()
register_perf_hw_breakpoint()
mutex_lock(child->perf_event_mutex); (A)
Which is against the normal (documented) order. Now, this is a false
positive in that child is not published yet, but also inherited events
never end up on ->perf_event_list.
Annotate this one away.
Fixes: 0912037fec ("perf/hw_breakpoint: Reduce contention with large number of tasks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Mark reported that the new for_each_sibling_event() assertion triggers
in pmu_filter_match() -- which isn't always called with IRQs disabled
or ctx->mutex held.
Fixes: f3c0eba287 ("perf: Add a few assertions")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YvvJq2f/7eFVcnNy@FVFF77S0Q05N
-----BEGIN PGP SIGNATURE-----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=VZl5
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"Seven patches for the LSM layer and we've got a mix of trivial and
significant patches. Highlights below, starting with the smaller bits
first so they don't get lost in the discussion of the larger items:
- Remove some redundant NULL pointer checks in the common LSM audit
code.
- Ratelimit the lockdown LSM's access denial messages.
With this change there is a chance that the last visible lockdown
message on the console is outdated/old, but it does help preserve
the initial series of lockdown denials that started the denial
message flood and my gut feeling is that these might be the more
valuable messages.
- Open userfaultfds as readonly instead of read/write.
While this code obviously lives outside the LSM, it does have a
noticeable impact on the LSMs with Ondrej explaining the situation
in the commit description. It is worth noting that this patch
languished on the VFS list for over a year without any comments
(objections or otherwise) so I took the liberty of pulling it into
the LSM tree after giving fair notice. It has been in linux-next
since the end of August without any noticeable problems.
- Add a LSM hook for user namespace creation, with implementations
for both the BPF LSM and SELinux.
Even though the changes are fairly small, this is the bulk of the
diffstat as we are also including BPF LSM selftests for the new
hook.
It's also the most contentious of the changes in this pull request
with Eric Biederman NACK'ing the LSM hook multiple times during its
development and discussion upstream. While I've never taken NACK's
lightly, I'm sending these patches to you because it is my belief
that they are of good quality, satisfy a long-standing need of
users and distros, and are in keeping with the existing nature of
the LSM layer and the Linux Kernel as a whole.
The patches in implement a LSM hook for user namespace creation
that allows for a granular approach, configurable at runtime, which
enables both monitoring and control of user namespaces. The general
consensus has been that this is far preferable to the other
solutions that have been adopted downstream including outright
removal from the kernel, disabling via system wide sysctls, or
various other out-of-tree mechanisms that users have been forced to
adopt since we haven't been able to provide them an upstream
solution for their requests. Eric has been steadfast in his
objections to this LSM hook, explaining that any restrictions on
the user namespace could have significant impact on userspace.
While there is the possibility of impacting userspace, it is
important to note that this solution only impacts userspace when it
is requested based on the runtime configuration supplied by the
distro/admin/user. Frederick (the pathset author), the LSM/security
community, and myself have tried to work with Eric during
development of this patchset to find a mutually acceptable
solution, but Eric's approach and unwillingness to engage in a
meaningful way have made this impossible. I have CC'd Eric directly
on this pull request so he has a chance to provide his side of the
story; there have been no objections outside of Eric's"
* tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: ratelimit denial messages
userfaultfd: open userfaultfds with O_RDONLY
selinux: Implement userns_create hook
selftests/bpf: Add tests verifying bpf lsm userns_create hook
bpf-lsm: Make bpf_lsm_userns_create() sleepable
security, lsm: Introduce security_create_user_ns()
lsm: clean up redundant NULL pointer check
This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds. The current implementation
("Kernel CFI") is specific to C, directly designed for the Linux kernel,
and takes advantage of architectural features like x86's IBT. This
series retains arm64 support and adds x86 support. Additional "generic"
architectural support is expected soon:
https://github.com/samitolvanen/llvm-project/commits/kcfi_generic
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support
-----BEGIN PGP SIGNATURE-----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=Li4D
-----END PGP SIGNATURE-----
Merge tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kcfi updates from Kees Cook:
"This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds.
The new implementation ("Kernel CFI") is specific to C, directly
designed for the Linux kernel, and takes advantage of architectural
features like x86's IBT. This series retains arm64 support and adds
x86 support.
GCC support is expected in the future[1], and additional "generic"
architectural support is expected soon[2].
Summary:
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1]
Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2]
* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
x86: Add support for CONFIG_CFI_CLANG
x86/purgatory: Disable CFI
x86: Add types to indirectly called assembly functions
x86/tools/relocs: Ignore __kcfi_typeid_ relocations
kallsyms: Drop CONFIG_CFI_CLANG workarounds
objtool: Disable CFI warnings
objtool: Preserve special st_shndx indexes in elf_update_symbol
treewide: Drop __cficanonical
treewide: Drop WARN_ON_FUNCTION_MISMATCH
treewide: Drop function_nocfi
init: Drop __nocfi from __init
arm64: Drop unneeded __nocfi attributes
arm64: Add CFI error handling
arm64: Add types to indirect called assembly functions
psci: Fix the function type for psci_initcall_t
lkdtm: Emit an indirect call for CFI tests
cfi: Add type helper macros
cfi: Switch to -fsanitize=kcfi
cfi: Drop __CFI_ADDRESSABLE
cfi: Remove CONFIG_CFI_CLANG_SHADOW
...
The initial support of Rust-for-Linux comes in roughly 4 areas:
- Kernel internals (kallsyms expansion for Rust symbols, %pA format)
- Kbuild infrastructure (Rust build rules and support scripts)
- Rust crates and bindings for initial minimum viable build
- Rust kernel documentation and samples
Rust support has been in linux-next for a year and a half now, and the
short log doesn't do justice to the number of people who have contributed
both to the Linux kernel side but also to the upstream Rust side to
support the kernel's needs. Thanks to these 173 people, and many more,
who have been involved in all kinds of ways:
Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo,
Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin,
Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA
Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron,
Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu,
Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett,
Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook,
Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael
Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo,
Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin
Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John
Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan
Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall,
Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek,
David S. Miller, John Hawley, James Bottomley, Arnd Bergmann,
Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena
Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard
Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown,
Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal
Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara,
David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre
Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy
Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda,
Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello,
Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones,
Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha
Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo,
Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan
Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu
XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini,
Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett,
Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl,
Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park,
Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham,
Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu,
Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson,
Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes,
Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash,
Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert
Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds.
-----BEGIN PGP SIGNATURE-----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=zz09
-----END PGP SIGNATURE-----
Merge tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux
Pull Rust introductory support from Kees Cook:
"The tree has a recent base, but has fundamentally been in linux-next
for a year and a half[1]. It's been updated based on feedback from the
Kernel Maintainer's Summit, and to gain recent Reviewed-by: tags.
Miguel is the primary maintainer, with me helping where needed/wanted.
Our plan is for the tree to switch to the standard non-rebasing
practice once this initial infrastructure series lands.
The contents are the absolute minimum to get Rust code building in the
kernel, with many more interfaces[2] (and drivers - NVMe[3], 9p[4], M1
GPU[5]) on the way.
The initial support of Rust-for-Linux comes in roughly 4 areas:
- Kernel internals (kallsyms expansion for Rust symbols, %pA format)
- Kbuild infrastructure (Rust build rules and support scripts)
- Rust crates and bindings for initial minimum viable build
- Rust kernel documentation and samples
Rust support has been in linux-next for a year and a half now, and the
short log doesn't do justice to the number of people who have
contributed both to the Linux kernel side but also to the upstream
Rust side to support the kernel's needs. Thanks to these 173 people,
and many more, who have been involved in all kinds of ways:
Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo,
Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin,
Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA
Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron,
Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu,
Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett,
Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook,
Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael
Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo,
Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin
Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John
Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan
Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall,
Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek,
David S. Miller, John Hawley, James Bottomley, Arnd Bergmann,
Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena
Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard
Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown,
Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal
Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara,
David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre
Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy
Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda,
Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello,
Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones,
Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha
Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo,
Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan
Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu
XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini,
Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett,
Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl,
Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park,
Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham,
Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu,
Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson,
Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes,
Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash,
Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert
Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds"
Link: https://lwn.net/Articles/849849/ [1]
Link: https://github.com/Rust-for-Linux/linux/commits/rust [2]
Link: d88c3744d6 [3]
Link: 9367032607 [4]
Link: https://github.com/AsahiLinux/linux/commits/gpu/rust-wip [5]
* tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux: (27 commits)
MAINTAINERS: Rust
samples: add first Rust examples
x86: enable initial Rust support
docs: add Rust documentation
Kbuild: add Rust support
rust: add `.rustfmt.toml`
scripts: add `is_rust_module.sh`
scripts: add `rust_is_available.sh`
scripts: add `generate_rust_target.rs`
scripts: add `generate_rust_analyzer.py`
scripts: decode_stacktrace: demangle Rust symbols
scripts: checkpatch: enable language-independent checks for Rust
scripts: checkpatch: diagnose uses of `%pA` in the C side as errors
vsprintf: add new `%pA` format specifier
rust: export generated symbols
rust: add `kernel` crate
rust: add `bindings` crate
rust: add `macros` crate
rust: add `compiler_builtins` crate
rust: adapt `alloc` crate to the kernel
...
Daniel Borkmann says:
====================
pull-request: bpf 2022-10-03
We've added 10 non-merge commits during the last 23 day(s) which contain
a total of 14 files changed, 130 insertions(+), 69 deletions(-).
The main changes are:
1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended
for unprivileged BPF programs, from Kumar Kartikeya Dwivedi.
2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk
sockets, from Jalal Mostafa.
3) Fix truncated last_member_type_id in btf_struct_resolve() which had a
wrong storage type, from Lorenz Bauer.
4) Fix xsk back-pressure mechanism on tx when amount of produced
descriptors to CQ is lower than what was grabbed from xsk tx ring,
from Maciej Fijalkowski.
5) Fix wrong cgroup attach flags being displayed to effective progs,
from Pu Lehui.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Inherit need_wakeup flag for shared sockets
bpf: Gate dynptr API behind CAP_BPF
selftests/bpf: Adapt cgroup effective query uapi change
bpftool: Fix wrong cgroup attach flags being assigned to effective progs
bpf, cgroup: Reject prog_attach_flags array when effective query
bpf: Ensure correct locking around vulnerable function find_vpid()
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
selftests/xsk: Add missing close() on netns fd
xsk: Fix backpressure mechanism on Tx
MAINTAINERS: Add include/linux/tnum.h to BPF CORE
====================
Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kvcalloc() is safer because it will check the integer overflows, and using
it will simple the logic of allocation size.
Link: https://lkml.kernel.org/r/20220909101025.82955-1-wuchi.zero@gmail.com
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for MADV_COLLAPSE to collapse shmem-backed and file-backed
memory into THPs (requires CONFIG_READ_ONLY_THP_FOR_FS=y).
On success, the backing memory will be a hugepage. For the memory range
and process provided, the page tables will synchronously have a huge pmd
installed, mapping the THP. Other mappings of the file extent mapped by
the memory range may be added to a set of entries that khugepaged will
later process and attempt update their page tables to map the THP by a
pmd.
This functionality unlocks two important uses:
(1) Immediately back executable text by THPs. Current support provided
by CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large
system which might impair services from serving at their full rated
load after (re)starting. Tricks like mremap(2)'ing text onto
anonymous memory to immediately realize iTLB performance prevents
page sharing and demand paging, both of which increase steady state
memory footprint. Now, we can have the best of both worlds: Peak
upfront performance and lower RAM footprints.
(2) userfaultfd-based live migration of virtual machines satisfy UFFD
faults by fetching native-sized pages over the network (to avoid
latency of transferring an entire hugepage). However, after guest
memory has been fully copied to the new host, MADV_COLLAPSE can
be used to immediately increase guest performance.
Since khugepaged is single threaded, this change now introduces
possibility of collapse contexts racing in file collapse path. There a
important few places to consider:
(1) hpage_collapse_scan_file(), when we xas_pause() and drop RCU.
We could have the memory collapsed out from under us, but
the next xas_for_each() iteration will correctly pick up the
hugepage. The hugepage might not be up to date (insofar as
copying of small page contents might not have completed - the
page still may be locked), but regardless what small page index
we were iterating over, we'll find the hugepage and identify it
as a suitably aligned compound page of order HPAGE_PMD_ORDER.
In khugepaged path, we locklessly check the value of the pmd,
and only add it to deferred collapse array if we find pmd
mapping pte table. This is fine, since other values that could
have raced in right afterwards denote failure, or that the
memory was successfully collapsed, so we don't need further
processing.
In madvise path, we'll take mmap_lock() in write to serialize
against page table updates and will know what to do based on the
true value of the pmd: recheck all ptes if we point to a pte table,
directly install the pmd, if the pmd has been cleared, but
memory not yet faulted, or nothing at all if we find a huge pmd.
It's worth putting emphasis here on how we treat the none pmd
here. If khugepaged has processed this mm's page tables
already, it will have left the pmd cleared (ready for refault by
the process). Depending on the VMA flags and sysfs settings,
amount of RAM on the machine, and the current load, could be a
relatively common occurrence - and as such is one we'd like to
handle successfully in MADV_COLLAPSE. When we see the none pmd
in collapse_pte_mapped_thp(), we've locked mmap_lock in write
and checked (a) huepaged_vma_check() to see if the backing
memory is appropriate still, along with VMA sizing and
appropriate hugepage alignment within the file, and (b) we've
found a hugepage head of order HPAGE_PMD_ORDER at the offset
in the file mapped by our hugepage-aligned virtual address.
Even though the common-case is likely race with khugepaged,
given these checks (regardless how we got here - we could be
operating on a completely different file than originally checked
in hpage_collapse_scan_file() for all we know) it should be safe
to directly make the pmd a huge pmd pointing to this hugepage.
(2) collapse_file() is mostly serialized on the same file extent by
lock sequence:
| lock hupepage
| lock mapping->i_pages
| lock 1st page
| unlock mapping->i_pages
| <page checks>
| lock mapping->i_pages
| page_ref_freeze(3)
| xas_store(hugepage)
| unlock mapping->i_pages
| page_ref_unfreeze(1)
| unlock 1st page
V unlock hugepage
Once a context (who already has their fresh hugepage locked)
locks mapping->i_pages exclusively, it will hold said lock
until it locks the first page, and it will hold that lock until
the after the hugepage has been added to the page cache (and
will unlock the hugepage after page table update, though that
isn't important here).
A racing context that loses the race for mapping->i_pages will
then lose the race to locking the first page. Here - depending
on how far the other racing context has gotten - we might find
the new hugepage (in which case we'll exit cleanly when we
check PageTransCompound()), or we'll find the "old" 1st small
page (in which we'll exit cleanly when we discover unexpected
refcount of 2 after isolate_lru_page()). This is assuming we
are able to successfully lock the page we find - in shmem path,
we could just fail the trylock and exit cleanly anyways.
Failure path in collapse_file() is similar: once we hold lock
on 1st small page, we are serialized against other collapse
contexts. Before the 1st small page is unlocked, we add it
back to the pagecache and unfreeze the refcount appropriately.
Contexts who lost the race to the 1st small page will then find
the same 1st small page with the correct refcount and will be
able to proceed.
[zokeefe@google.com: don't check pmd value twice in collapse_pte_mapped_thp()]
Link: https://lkml.kernel.org/r/20220927033854.477018-1-zokeefe@google.com
[shy828301@gmail.com: Delete hugepage_vma_revalidate_anon(), remove
check for multi-add in khugepaged_add_pte_mapped_thp()]
Link: https://lore.kernel.org/linux-mm/CAHbLzkrtpM=ic7cYAHcqkubah5VTR8N5=k5RT8MTvv5rN1Y91w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220907144521.3115321-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220922224046.1143204-4-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When executing BPF programs, certain registers may get passed
uninitialized to helper functions. E.g. when performing a JMP_CALL,
registers BPF_R1-BPF_R5 are always passed to the helper, no matter how
many of them are actually used.
Passing uninitialized values as function parameters is technically
undefined behavior, so we work around it by always initializing the
registers.
Link: https://lkml.kernel.org/r/20220915150417.722975-42-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
struct pt_regs passed into IRQ entry code is set up by uninstrumented asm
functions, therefore KMSAN may not notice the registers are initialized.
kmsan_unpoison_entry_regs() unpoisons the contents of struct pt_regs,
preventing potential false positives. Unlike kmsan_unpoison_memory(), it
can be called under kmsan_in_runtime(), which is often the case in IRQ
entry code.
Link: https://lkml.kernel.org/r/20220915150417.722975-41-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN does not instrument kernel/kcov.c for performance reasons (with
CONFIG_KCOV=y virtually every place in the kernel invokes kcov
instrumentation). Therefore the tool may miss writes from kcov.c that
initialize memory.
When CONFIG_DEBUG_LIST is enabled, list pointers from kernel/kcov.c are
passed to instrumented helpers in lib/list_debug.c, resulting in false
positives.
To work around these reports, we unpoison the contents of area->list after
initializing it.
Link: https://lkml.kernel.org/r/20220915150417.722975-30-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocate a new hugetlb_vma_lock structure and hang off vm_private_data for
synchronization use by vmas that could be involved in pmd sharing. This
data structure contains a rw semaphore that is the primary tool used for
synchronization.
This new structure is ref counted, so that it can exist when NOT attached
to a vma. This is only helpful in resolving lock ordering issues where
code may need to obtain the vma_lock while there are no guarantees the vma
may go away. By obtaining a ref on the structure, it can be guaranteed
that at least the rw semaphore will not go away.
Only add infrastructure for the new lock here. Actual use will be added
in subsequent patches.
[mike.kravetz@oracle.com: fix build issue for missing hugetlb_vma_lock_release]
Link: https://lkml.kernel.org/r/YyNUtA1vRASOE4+M@monkey
Link: https://lkml.kernel.org/r/20220914221810.95771-7-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds