Geert Uytterhoeven <geert+renesas@glider.be> says:
This patch series adds support for the CAN-FD interface on the Renesas
R-Car V4H (R8A779G0) SoC and support for CAN transceivers described as
PHYs to the R-Car CAN-FD driver. It includes several fixes for issues
(some minor) detected while adding the support and during testing.
More details can be found in the individual patches.
This has been tested on the Renesas White-Hawk development board using
cansend, candump, and canfdtest:
- Channel 0 uses an NXP TJR1443AT CAN transceiver, and works fine,
- Channels 1-7 use Microchip MCP2558FD-H/SN CAN transceivers (not
mounted for channels 4-7), which do not need explicit description.
While channel 1 works fine, channels 2-3 do not seem to work.
Hence despite the new fixes, the test results are similar to what Ulrich
Hecht reported for R-Car V3U on the Falcon development board before,
i.e. only channels 0 and 1 work (FTR, [2] does not help).
Whether this is a CAN-FD driver issue, a pin control issue, an IP core
issue, or an SoC integration issue is still to be seen...
[1] https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be
[2] commit e3e5bccc92446048 ("can: rcar_canfd:
rcar_canfd_configure_afl_rules(): Fix Rx FIFO entry setting") in
renesas-bsp/v5.10.147/rcar-5.2.0.rc3.
Link: https://lore.kernel.org/all/cover.1674499048.git.geert+renesas@glider.be
[mkl: applying patches 1...11 only]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On R-Car Gen4 CAN_FD variants, the Data Bit Rate Resynchronization Jump
Width Control (DSJW) field in the Channel n Data Bitrate Configuration
Register (DCFG) register is one bit wider than on older variants.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/c4e8bc220bf87e6c7e375f7a2ce51e2aa89ea8a7.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Despite the name, R-Car V3U (R8A779A0) was the first member of the R-Car
Gen4 family. Generalize the support for R-Car V3U to other SoCs in the
R-Car Gen4 family by adding a family-specific compatible value, and by
replacing all references to "V3U" by "Gen4".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/61f6f34eb7bcc62ff604add98f1bcd2d2584187d.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Abstract the different addresses for the Channel n Data Bitrate
Configuration Register (DCFG) in the definition of the register macro,
like is already done for other register definitions, to simplify code
accessing this register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/13e02d710dac3ddef73aa4be2b995766db9b6b4d.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Each Global Acceptance Filter List Configuration Register (GAFLCFG)
contains two fields, and stores the number of channel rules for one
channel pair.
As R-Car V3U and later can have more than 2 channels, the field
selection should be based on the LSB (even or odd) of the channel
number, instead of on the full channel number.
Fixes: 45721c406d ("can: rcar_canfd: Add support for r8a779a0 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/36bcf0ffb96d6aaed970751f9546b901af638bcf.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When adding support for R-Car V3U, the Global FD Configuration register
(CFDGFDCFG) and the Channel-specific CAN-FD Configuration Registers
(CFDCmFDCFG) were mixed up. Use the correct register, and apply the
selected CAN mode to all available channels.
Annotate the corresponding register bits, to make it clear they do
not exist on older variants.
Fixes: 45721c406d ("can: rcar_canfd: Add support for r8a779a0 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/388ddf312917eb9f6cc460a481f68402a876f9b5.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for describing CAN transceivers as PHYs.
While simple CAN transceivers can do without, this is needed for CAN
transceivers like NXP TJR1443 that need a configuration step (like
pulling standby or enable lines), and/or impose a bitrate limit.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/1bd328b5c9c6cfa633b42af87550f4c7358a05c1.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence generalize this by introducing a family-specific
compatible value for R-Car Gen4.
While at it, replace "both channels" by "all channels", as the numbers
of channels may differ from two.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/4dea4b7dd76d4f859ada85f97094b7adeef5169f.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=FS9z
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.3
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (35 commits)
coresight: tmc: Don't enable TMC when it's not ready.
coresight: tpda: fix return value check in tpda_probe()
Coresight: tpda/tpdm: remove incorrect __exit annotation
coresight: perf: Output trace id only once
coresight: Fix uninitialised variable use in coresight_disable
Documentation: coresight: tpdm: Add dummy comment after sysfs list
Documentation: coresight: Extend title heading syntax in TPDM and TPDA documentation
Documentation: trace: Add documentation for TPDM and TPDA
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Coresight: Add TPDA link driver
coresight-tpdm: Add integration test support
coresight-tpdm: Add DSB dataset support
dt-bindings: arm: Add CoreSight TPDM hardware
Coresight: Add coresight TPDM source driver
coresight: core: Use IDR for non-cpu bound sources' paths.
coresight: trace-id: Add debug & test macros to Trace ID allocation
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
kernel: events: Export perf_report_aux_output_id()
coresight: trace id: Remove legacy get trace ID function.
coresight: etmX.X: stm: Remove trace_id() callback
...
Add the new options to the man page, as well as updating the
example to include the new output.
Link: https://lkml.kernel.org/r/a3f5fb49432a55c3323b18725fc6e702f16ccc79.1675179318.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, timerlat top displays the timerlat tracer latency results, saving
the intuitive timerlat trace for the developer to analyze.
This patch goes a step forward in the automaton of the scheduling latency
analysis by providing a summary of the root cause of a latency higher than
the passed "stop tracing" parameter if the trace stops.
The output is intuitive enough for non-expert users to have a general idea
of the root cause by looking at each factor's contribution percentage while
keeping the technical detail in the output for more expert users to start
an in dept debug or to correlate a root cause with an existing one.
The terminology is in line with recent industry and academic publications
to facilitate the understanding of both audiences.
Here is one example of tool output:
----------------------------------------- %< -----------------------------------------------------
# taskset -c 0 timerlat -a 40 -c 1-23 -q
Timer Latency
0 00:00:12 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
1 #12322 | 0 0 1 15 | 10 3 9 31
2 #12322 | 3 0 1 12 | 10 3 9 23
3 #12322 | 1 0 1 21 | 8 2 8 34
4 #12322 | 1 0 1 17 | 10 2 11 33
5 #12322 | 0 0 1 12 | 8 3 8 25
6 #12322 | 1 0 1 14 | 16 3 11 35
7 #12322 | 0 0 1 14 | 9 2 8 29
8 #12322 | 1 0 1 22 | 9 3 9 34
9 #12322 | 0 0 1 14 | 8 2 8 24
10 #12322 | 1 0 0 12 | 9 3 8 24
11 #12322 | 0 0 0 15 | 6 2 7 29
12 #12321 | 1 0 0 13 | 5 3 8 23
13 #12319 | 0 0 1 14 | 9 3 9 26
14 #12321 | 1 0 0 13 | 6 2 8 24
15 #12321 | 1 0 1 15 | 12 3 11 27
16 #12318 | 0 0 1 13 | 7 3 10 24
17 #12319 | 0 0 1 13 | 11 3 9 25
18 #12318 | 0 0 0 12 | 8 2 8 20
19 #12319 | 0 0 1 18 | 10 2 9 28
20 #12317 | 0 0 0 20 | 9 3 8 34
21 #12318 | 0 0 0 13 | 8 3 8 28
22 #12319 | 0 0 1 11 | 8 3 10 22
23 #12320 | 28 0 1 28 | 41 3 11 41
rtla timerlat hit stop tracing
## CPU 23 hit stop tracing, analyzing it ##
IRQ handler delay: 27.49 us (65.52 %)
IRQ latency: 28.13 us
Timerlat IRQ duration: 9.59 us (22.85 %)
Blocking thread: 3.79 us (9.03 %)
objtool:49256 3.79 us
Blocking thread stacktrace
-> timerlat_irq
-> __hrtimer_run_queues
-> hrtimer_interrupt
-> __sysvec_apic_timer_interrupt
-> sysvec_apic_timer_interrupt
-> asm_sysvec_apic_timer_interrupt
-> _raw_spin_unlock_irqrestore
-> cgroup_rstat_flush_locked
-> cgroup_rstat_flush_irqsafe
-> mem_cgroup_flush_stats
-> mem_cgroup_wb_stats
-> balance_dirty_pages
-> balance_dirty_pages_ratelimited_flags
-> btrfs_buffered_write
-> btrfs_do_write_iter
-> vfs_write
-> __x64_sys_pwrite64
-> do_syscall_64
-> entry_SYSCALL_64_after_hwframe
------------------------------------------------------------------------
Thread latency: 41.96 us (100%)
The system has exit from idle latency!
Max timerlat IRQ latency from idle: 17.48 us in cpu 4
Saving trace to timerlat_trace.txt
----------------------------------------- >% -----------------------------------------------------
In this case, the major factor was the delay suffered by the IRQ handler
that handles timerlat wakeup: 65.52 %. This can be caused by the
current thread masking interrupts, which can be seen in the blocking
thread stacktrace: the current thread (objtool:49256) disabled interrupts
via raw spin lock operations inside mem cgroup, while doing write
syscall in a btrfs file system.
A simple search for the function name on Google shows that this is
a legit case for disabling the interrupts:
cgroup: Use irqsave in cgroup_rstat_flush_locked()
lore.kernel.org/linux-mm/20220301122143.1521823-2-bigeasy@linutronix.de/
The output also prints other reasons for the latency root cause, such as:
- an IRQ that happened before the IRQ handler that caused delays
- The interference from NMI, IRQ, Softirq, and Threads
The details about how these factors affect the scheduling latency
can be found here:
https://bristot.me/demystifying-the-real-time-linux-latency/
Link: https://lkml.kernel.org/r/3d45f40e630317f51ac6d678e2d96d310e495729.1675179318.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, timerlat displays a summary of the timerlat tracer results
saving the trace if the system hits a stop condition.
While this represented a huge step forward, the root cause was not
that is accessible to non-expert users.
The auto-analysis fulfill this gap by parsing the trace timerlat runs,
printing an intuitive auto-analysis.
Link: https://lkml.kernel.org/r/1ee073822f6a2cbb33da0c817331d0d4045e837f.1675179318.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The get port status hub request code in xhci-hub.c will complete usb2
port resume signalling if signalling has been going on for long enough.
The code that completes the resume signalling, and the code that returns
the port status have gotten too intertwined, so separate them a bit.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initially resume related USB2 variables were cleared once port
successfully resumed to U0. Later code was added to clean up
stale resume variables in case of port failed to resume to U0.
Clear the variables in one place after port is no longer resuming
or in suspended U3 state.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
resume_done is just a timestamp, avoid confusing it with completions
related to port state transitions that are named *_done
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass the port structure to xhci_disable_port() instead of
address, index, and value.
re-read the port portsc value before disabling the port.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have a port structure for each port it makes sense to
move per port variables, timestamps and completions there.
Get rid of storing bitfileds and arrays of port specific items per bus.
Move
unsigned long resume_done;
insigned long rexit_ports
struct completion rexit_done;
struct completion u3exit_done;
Rename rexit_ports to rexit_active, and remove a redundant hcd
speed check while checking if rexit_active is set.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both port number and port structure of a port are referred to several
times when handing hub requests in xhci.
Use more suitable data types and readable names for these.
Cleanup only, no functional changes
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHC supports several interrupters, each with its own mmio register set,
event ring and MSI/MSI-X vector. Transfers can be assigned different
interrupters when queued. See xhci 4.17 for details.
Current driver only supports one interrupter.
Create a xhci_interrupter structure containing an event ring, pointer to
mmio registers for this interrupter, variables to store registers over s3
suspend, erst, etc. Add functions to create and free an interrupter, and
pass an interrupter pointer to functions that deal with events.
Secondary interrupters are also useful without having an interrupt vector.
One use case is the xHCI audio sideband offloading where a DSP can take
care of specific audio endpoints.
When all transfer events of an offloaded endpoint can be mapped to a
separate interrupter event ring the DSP can poll this ring, and we can mask
these events preventing waking up the CPU.
Only minor functional changes such as clearing some of the interrupter
registers when freeing the interrupter.
Still create only one primary interrupter.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Time to remove this test trb in td math check that was added
in early stage of xhci driver development.
It verified that the size, alignment and boundaries of the event and
command rings allocated by the driver itself are correct.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHC controller can supports up to 1024 interrupters.
To fit these change the max_interrupters varable from u8 to u16.
Add a separate mask for the reserve and preserve bits [5:0] in the erst
base register and use it instead of the ERST_PRT_MASK.
ERSR_PTR_MASK [3:0] is intended for masking bits in the
event ring dequeue pointer register.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As interrupts are Level-triggered,unless and until we deassert the register
the interrupts are generated which causes spurious interrupts unhandled.
Now we deasserted the interrupt at top half which solved the below
"nobody cared" warning.
warning reported in dmesg:
irq 80: nobody cared (try booting with the "irqpoll" option)
CPU: 5 PID: 2735 Comm: irq/80-AudioDSP
Not tainted 5.15.86-15817-g4c19f3e06d49 #1 1bd3fd932cf58caacc95b0504d6ea1e3eab22289
Hardware name: Google Skyrim/Skyrim, BIOS Google_Skyrim.15303.0.0 01/03/2023
Call Trace:
<IRQ>
dump_stack_lvl+0x69/0x97
__report_bad_irq+0x3a/0xae
note_interrupt+0x1a9/0x1e3
handle_irq_event_percpu+0x4b/0x6e
handle_irq_event+0x36/0x5b
handle_fasteoi_irq+0xae/0x171
__common_interrupt+0x48/0xc4
</IRQ>
handlers:
acp_irq_handler [snd_sof_amd_acp] threaded [<000000007e089f34>] acp_irq_thread [snd_sof_amd_acp]
Disabling IRQ #80
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20230203123254.1898794-1-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
It's been reported that a number of laptops have a low volume
level from the digital microphone compared to Windows.
AMD offers a register that can adjust the gain for PDM which is not
configured at maximum gain by default.
To fix this change the default for all 3 drivers to raise the gain
but also offer a module parameter. The module parameter can be used
for debugging if the gain is too high on a given laptop.
This is intentionally split into multiple patches for default and
parameter so that if the default really does behave better universally
we can bring it back to stable too later.
PCIe ports reserved for VMD use are not visible to BIOS and therefore not
configured to enable PCIe ASPM or LTR values (which BIOS will configure if
they are not set). Lack of this programming results in high power
consumption on laptops as reported in bugzilla. For affected products use
pci_enable_link_state to set the allowed link states for devices on the
root ports. Also set the LTR value to the maximum value needed for the SoC.
This is a workaround for products from Rocket Lake through Alder Lake.
Raptor Lake, the latest product at this time, has already implemented LTR
configuring in BIOS. Future products will move ASPM configuration back to
BIOS as well. As this solution is intended for laptops, support is not
added for hotplug or for devices downstream of a switch on the root port.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717
Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Simplify the device ID list by creating a grouping of features shared by
client products.
Suggested-by: Jon Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
If we enable the memory stick block layer, use Kconfig to imply
the BFQ I/O scheduler.
As all memstick devices are single-queue, this is the scheduler that
users want so let's be helpful and make sure it gets
default-selected into a manual kernel configuration. It will still
need to be enabled at runtime (usually with udev scripts).
Cc: linux-block@vger.kernel.org
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230131085220.1038241-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If we enable the MMC/SD block layer, use Kconfig to imply the BFQ
I/O scheduler.
As all MMC/SD devices are single-queue, this is the scheduler that
users want so let's be helpful and make sure it gets
default-selected into a manual kernel configuration. It will still
need to be enabled at runtime (usually with udev scripts).
Cc: linux-block@vger.kernel.org
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230131084742.1038135-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use PCI_VDEVICE to simplify the device table.
Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Add pci_enable_link_state() to allow devices to change the default BIOS
configured states. Clears the BIOS default settings then sets the new
states and reconfigures the link under the semaphore. Also add
PCIE_LINK_STATE_ALL macro for convenience for callers that want to enable
all link states.
Link: https://lore.kernel.org/r/20230120031522.2304439-2-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few scripts in tools/power still refer to this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To send CAN traffic back to the incoming interface a special flag has to
be set. When creating a routing job for identical interfaces without this
flag the rule is created but has no effect.
This patch adds an error return value in the case that the CAN interfaces
are identical but the CGW_FLAGS_CAN_IIF_TX_OK flag was not set.
Reported-by: Jannik Hartung <jannik.hartung@tu-bs.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230125055407.2053-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The same device operations object is pointed to by all of the board
configurations in the driver, so effectively the same operations
callbacks are used by all of them which only adds overhead (that can
be significant due to retpolines) for no real purpose.
For this reason, drop the device operations object and replace the
respective callback invocations by direct calls to the specific
functions that were previously pointed to by callback pointers.
No intentional change in behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Because the same device operations callbacks are used for all supported
boards, they are in fact generic, so rename them to reflect that.
Also rename the operations object itself for consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Both pch_wpt_init() and pch_wpt_get_temp() can return the proper
result via their return values, so they do not need to use return
pointers.
Modify them accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
using a return pointer for that.
While at it, drop an excessive empty code line.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Instead of using snprintf() to populate the ACPI object name in
int340x_thermal_set_trip_temp(), use an appropriate initializer
and make the function fail if its trip argument is greater than 9,
because ACPI object names can only be 4 characters long and it does
not make sense to even try to evaluate objects with longer names (that
argument is guaranteed to be non-negative, because it comes from the
thermal code that will not pass negative trip numbers to zone
callbacks).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The explicit casting from int to unsigned long in
int340x_thermal_get_zone_temp() is pointless, becuase the multiplication
result is cast back to int by the assignment in the same statement, so
drop it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20230201081438.3151-1-liubo03@inspur.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.
Modify the ACPI thermal helpers accordingly and update their users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Raju Rangoju says:
====================
amd-xgbe: add support for 2.5GbE and rx-adaptation
This patch series adds support for 2.GbE in 10GBaseT mode and
rx-adaptation support for Yellow Carp devices.
1) Support for 2.5GbE:
Add the necessary changes to the driver to fully recognize and enable
2.5GbE speed in 10GBaseT mode.
2) Support for rx-adaptation:
In order to support the 10G backplane mode without Auto-negotiation
and to support the longer-length DAC cables, it requires PHY to
perform RX Adaptation sequence as mentioned in the Synopsys databook.
Add the necessary changes to Yellow Carp devices to ensure seamless
RX Adaptation for 10G-SFI (LONG DAC), and 10G-KR modes without
Auto-Negotiation (CL72 not present)
====================
Link: https://lore.kernel.org/r/20230201054932.212700-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde