This removes a layer of indirection through pm_power_off() and allows
the PMIC handler to be used as a fallback when firmware power off fails.
This happens on boards like the Clockwork DevTerm R-01 where OpenSBI
does not know how to use the PMIC to power off the board.
Move the check for AXP288 to avoid registering a dummy handler.
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Lee: Removed superfluous new line]
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221228162752.14204-1-samuel@sholland.org
Document hpe,gxp-sysreg compatible for GXP registers.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221216183532.78933-4-nick.hawkins@hpe.com
TWL6032 has a few charging registers prepended before the charging
registers the TWL6030 has. To be able to use common register defines
declare the additional registers as additional module.
At the moment this affects the access to CHARGERUSB_CTRL1 in
phy-twl6030-usb. Without this patch, it is accessing the wrong register
on TWL6032.
The consequence is that presence of Vbus is not reported.
Cc: Bin Liu <b-liu@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208215723.217557-1-andreas@kemnade.info
`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure.
Fixes: 08c3e06a5e ("mfd: PCF50633 adc driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com
No one is funding MFD maintenance.
S: *Status*, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221206105038.124613-1-lee@kernel.org
Add a compatible string to support the UART implementation of the cros
ec interface. The driver does not support the reg and interrupt
properties, so exempt them from being required for UART compatible nodes.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@chromium.org>
Co-developed-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221207104005.v10.2.I9e018ecb8bdf341648cb64417085978ff0d22a46@changeid
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202212021528368292334@zte.com.cn
The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
17 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
18 | (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
24 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
25 | (boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
The power button can get "stuck" if the rising edge and falling edge irq
are read in the same pass. This can often be triggered when resuming
from suspend if the power button is released before the kernel handles
the interrupt.
Swapping the order of the rise and fall events makes sure that the press
event is handled first, which prevents this situation.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208220225.635414-1-aren@peacevolution.org
Fixes RK818 (e.g. on Pinephone Pro) to register its clock, without which
dependent devices (e.g. wifi/BT, via sdio-wifi-pwrseq) fail to probe.
This line was removed in commit 3633daacea
("mfd: rk808: Permit having multiple PMIC instances"), but only from RK818.
Fixes: 3633daacea ("mfd: rk808: Permit having multiple PMIC instances")
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230102111147.2580861-1-tom@tom-fitzhenry.me.uk
-----BEGIN PGP SIGNATURE-----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=Z4m+
-----END PGP SIGNATURE-----
mergetag object acf63c458b
type commit
tag ib-mfd-fpga-hwmon-v6.3-1
tagger Lee Jones <lee@kernel.org> 1675066458 +0000
Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
-----BEGIN PGP SIGNATURE-----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=JbTj
-----END PGP SIGNATURE-----
Merge tags 'ib-mfd-extcon-i2c-v6.3' and 'ib-mfd-fpga-hwmon-v6.3-1' into ibs-for-mfd-merged
Immutable branch between MFD, Extcon and I2C due for the v6.3 merge window
Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
plpks_is_available() can be called on any platform via kexec but calls
_plpks_get_config() which makes a hcall, which will only work on pseries.
Fix this by returning early in plpks_is_available() if hcalls aren't
possible.
Fixes: 119da30d03 ("powerpc/pseries: Expose PLPKS config values, support additional fields")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222021708.146257-1-ruscur@russell.cc
When we fail to send a FSF request in 'zfcp_fsf_req_send()' when calling
'zfcp_qdio_send()' we try to remove the request object from our internal
hash table again to prevent keeping a stale memory reference. This removal
might still - very much theoretically - fail.
To store some evidence of when this happens add a new trace record for
this case; tag: 'fsrsrmf'.
We reuse the 'ZFCP_DBF_HBA_RES' trace ID for this, but mark all fields
other then the request ID with ~0, to make fairly obvious that these are
invalid values. This faking has to be done because we don't have a valid
request object at this point, and can not safely access any of the memory
of the old object - we just failed to find it in our hash table, so it
might be gone already.
Here is an example of a decoded trace record:
Timestamp : 2023-02-17-13:09:12:748140
Area : HBA
Subarea : 1
Level : -
Exception : 000003ff7ff500c2
CPU ID : 0011
Caller : 0x0
Record ID : 1
Tag : fsrsrmf
Request ID : 0x0000000080126ab6
Request status : 0xffffffff
FSF cmnd : 0xffffffff
FSF sequence no: 0xffffffff
FSF issued : 2042-09-18-01:53:47:370495
FSF stat : 0xffffffff
FSF stat qual : ffffffff ffffffff ffffffff ffffffff
Prot stat : 0xffffffff
Prot stat qual : ffffffff ffffffff ffffffff ffffffff
Port handle : 0xffffffff
LUN handle : 0xffffffff
This provides at least some basic evidence that this event happened, and
what object was affected.
Link: https://lore.kernel.org/r/99b8246b2d71b63fa4f9c56333e2037502f7f5af.1677000450.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use different integer types throughout zfcp to store the FSF request ID
and related values; some places use 'unsigned long' and others 'u64'. On
s390x these are effectively the same type, but this might cause confusions
and is generally inconsistent.
The specification for the used hardware specifies this value as a 64-bit
number, and ultimately we use this value to communicate with the hardware,
so it makes sense to change the type of all these variables to 'u64' where
we can. The only exception being when we store it in the 'host_scribble'
field of a 'struct scsi_cmnd'; for this case we add a build time check to
make sure they are compatible.
Link: https://lore.kernel.org/r/9c9cbe5acc2b419a22dce2fed847e3db91b60201.1677000450.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The appropriate type for array indices is 'size_t' and the current
implementation in 'zfcp_reqlist.h' mixes 'int' and 'unsigned int' in
different places to access the hashtable buckets of our internal request
hash table.
To prevent any confusion, change all places to 'size_t'.
Link: https://lore.kernel.org/r/64afe93f6263c6b07815937826cd7d5fc4f1a674.1677000450.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use scsi_execute_cmd() instead of open-coding it.
Link: https://lore.kernel.org/r/20230210193258.4004923-4-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not set RQF_PM explicitly since scsi_alloc_request() sets it indirectly
if BLK_MQ_REQ_PM is set. The call chain for the code that sets RQF_PM is as
follows:
scsi_alloc_request()
blk_mq_alloc_request()
__blk_mq_alloc_requests()
blk_mq_rq_ctx_init()
if (data->flags & BLK_MQ_REQ_PM)
data->rq_flags |= RQF_PM;
Link: https://lore.kernel.org/r/20230210193258.4004923-3-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow SCSI LLDs to specify SCMD_* flags.
Link: https://lore.kernel.org/r/20230210193258.4004923-2-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the repeated word "the" in comments.
[mkp: fixed additional typos in the changed lines]
Link: https://lore.kernel.org/r/20230217083046.4090-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix an incorrect reference to the scsi_remove_host() function in a source
code comment.
Link: https://lore.kernel.org/r/20230210205200.36973-2-bvanassche@acm.org
Fixes: b49493f996 ("Fix a memory leak in scsi_host_dev_release()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds.
Link: https://lore.kernel.org/r/20230214005019.1897251-5-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using
byte as unit. However, bitmap helper functions assume that bitmaps are
allocated using unsigned long as unit. This gap causes memory access beyond
the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG
was observed at firmware download to eHBA-9600. Call trace indicated that
the out-of-bounds access happened in find_first_zero_bit() called from
mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap.
To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use
number of bits, and call bitmap helper functions which take number of bits
as arguments. For memory allocation, call bitmap_zalloc() instead of
kzalloc() and krealloc(). For memory free, call bitmap_free() instead of
kfree(). For zero clear, call bitmap_clear() instead of memset().
Remove three fields for bitmap byte sizes in struct scmd_priv which are no
longer required. Replace the field dev_handle_bitmap_sz with
dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across
resize.
Link: https://lore.kernel.org/r/20230214005019.1897251-4-shinichiro.kawasaki@wdc.com
Fixes: c5758fc72b ("scsi: mpi3mr: Gracefully handle online FW update operation")
Fixes: e844adb1fb ("scsi: mpi3mr: Implement SCSI error handler hooks")
Fixes: c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the function mpi3mr_get_all_tgt_info(), devmap_info points to
alltgt_info->dmi then there is no need to memcpy() data from devmap_info to
alltgt_info->dmi. Remove the unnecessary memcpy(). This also allows to
remove the local variable 'rval' and the goto label 'out'.
Link: https://lore.kernel.org/r/20230214005019.1897251-3-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a343 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function mpi3mr_get_all_tgt_info() has four issues:
1) It calculates valid entry length in alltgt_info assuming the header part
of the struct mpi3mr_device_map_info would equal to sizeof(u32). The
correct size is sizeof(u64).
2) When it calculates the valid entry length kern_entrylen, it excludes one
entry by subtracting 1 from num_devices.
3) It copies num_device by calling memcpy(). Substitution is enough.
4) It does not specify the calculated length to sg_copy_from_buffer().
Instead, it specifies the payload length which is larger than the
alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds".
Fix the issues by using the correct header size, removing the subtraction
from num_devices, replacing the memcpy() with substitution and specifying
the correct length to sg_copy_from_buffer().
Link: https://lore.kernel.org/r/20230214005019.1897251-2-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a343 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nothing else defined MPI3_NVME_ENCAP_CMD_MAX, so the "command" buffer was
being defined as a fake flexible array of size 1. Replace this with a
proper flex array. Avoids this GCC 13 warning under -fstrict-flex-arrays=3:
In function 'fortify_memset_chk',
inlined from 'mpi3mr_build_nvme_sgl' at ../drivers/scsi/mpi3mr/mpi3mr_app.c:693:2,
inlined from 'mpi3mr_bsg_process_mpt_cmds.constprop' at ../drivers/scsi/mpi3mr/mpi3mr_app.c:1214:8:
../include/linux/fortify-string.h:430:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
430 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20230204183715.never.937-kees@kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ipr_log_vpd_compact() function triggers a fortified memcpy() warning
about a potential string overflow with all versions of clang:
In file included from drivers/scsi/ipr.c:43:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
^
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
2 errors generated.
I don't see anything actually wrong with the function, but this is the only
instance I can reproduce of the fortification going wrong in the kernel at
the moment, so the easiest solution may be to rewrite the function into
something that does not trigger the warning.
Instead of having a combined buffer for vendor/device/serial strings, use
three separate local variables and just truncate the whitespace
individually.
Link: https://lore.kernel.org/r/20230214132831.2118392-1-arnd@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Fixes: 8cf093e275 ("[SCSI] ipr: Improved dual adapter errors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert function ipr_probe_ioa_part2() to return void instead of int since
the current implementation always returns 0 to the caller. The
transformation also eliminates the dead code when calling
ipr_probe_ioa_part2() function. Issue identified using returnvar
Coccinelle semantic patch.
Link: https://lore.kernel.org/r/Y7rvQyMOGcPKPTv8@ubun2204.myguest.virtualbox.org
Signed-off-by: Deepak R Varma <drv@mailo.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a controller has DIX is enabled and an attached disk is formatted using
a protection type supported by the controller, a block integrity profile is
registered to enable protected transfers.
If the disk is subsequently reformatted to disable PI, and the controller
does not support DIX Type 0, this can lead to failures such as this:
[142829.032340] hisi_sas_v3_hw 0000:b4:04.0: erroneous completion iptt=2375 task=00000000bea0970c dev id=5 direct-attached phy4 addr=51c20dbaf642a000 CQ hdr: 0x1023 0x50947 0x0 0x20000 Error info: 0x0 0x0 0x4 0x0
[142829.073883] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[142829.079783] sas: sas_scsi_find_task: aborting task 0x00000000bea0970c
[142829.102342] sas: Internal abort: task to dev 51c20dbaf642a000 response: 0x0 status 0x5
[142829.110319] sas: sas_eh_handle_sas_errors: task 0x00000000bea0970c is done
[142829.117275] sd 7:0:5:0: [sdc] tag#2375 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=DRIVER_OK cmd_age=0s
[142829.127171] sd 7:0:5:0: [sdc] tag#2375 CDB: opcode=0x2a 2a 00 00 00 00 00 00 00 08 00
[142829.135059] I/O error, dev sdc, sector 0 op 0x1:(WRITE) flags 0x18800 phys_seg 1 prio class 2
This is because the block layer integrity profile is currently only set up
the first time a disk is discovered.
To address this, remove the first_scan check when configuring protection
information during revalidate. Also unregister the block integrity profile
if DIX is not supported with a given protection type.
[mkp: commit description + printk dedup]
Link: https://lore.kernel.org/r/20230221081026.24736-1-yangxingui@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
Highlights:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add include/linux/platform_data/x86 to MAINTAINERS:
- Add include/linux/platform_data/x86 to MAINTAINERS
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Fix header inclusion in linux/platform_data/x86/soc.h:
- Fix header inclusion in linux/platform_data/x86/soc.h
HID:
- surface-hid: Use target-ID enum instead of hard-coding values
MAINTAINERS:
- dell-wmi-sysman: drop Divya Bharathi
- Add entry for TPMI driver
Merge tag 'ib-leds-led_get-v6.3' into HEAD:
- Merge tag 'ib-leds-led_get-v6.3' into HEAD
acerhdf:
- Drop empty platform remove function
apple_gmux:
- Drop no longer used ACPI_VIDEO Kconfig dependency
dell-ddv:
- Prefer asynchronous probing
- Add hwmon support
- Add "force" module param
- Replace EIO with ENOMSG
- Return error if buffer is empty
- Add support for interface version 3
dell-smo8800:
- Use min_t() for comparison and assignment
dell-wmi-sysman:
- Make kobj_type structure constant
hp-wmi:
- Ignore Win-Lock key events
int1092:
- Switch to use acpi_evaluate_dsm_typed()
int3472/discrete:
- add LEDS_CLASS dependency
- Drop unnecessary obj->type == string check
- Get the polarity from the _DSM entry
- Move GPIO request to skl_int3472_register_clock()
- Create a LED class device for the privacy LED
- Refactor GPIO to sensor mapping
intel:
- punit_ipc: Drop empty platform remove function
- oaktrail: Drop empty platform remove function
intel/pmc:
- Switch to use acpi_evaluate_dsm_typed()
leds:
- led-class: Add generic [devm_]led_get()
- led-class: Add __devm_led_get() helper
- led-class: Add led_module_get() helper
- led-class: Add missing put_device() to led_put()
media:
- v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present
nvidia-wmi-ec-backlight:
- Add force module parameter
platform:
- mellanox: mlx-platform: Move bus shift assignment out of the loop
- mellanox: mlx-platform: Add mux selection register to regmap
- mellanox: Extend all systems with I2C notification callback
- mellanox: Split logic in init and exit flow
- mellanox: Split initialization procedure
- mellanox: Introduce support of new Nvidia L1 switch
- mellanox: Introduce support for next-generation 800GB/s switch
- mellanox: Cosmetic changes - rename to more common name
- mellanox: Change "reset_pwr_converter_fail" attribute
- mellanox: Introduce support for rack manager switch
platform/mellanox:
- mlxreg-hotplug: Allow more flexible hotplug events configuration
platform/surface:
- Switch to use acpi_evaluate_dsm_typed()
- aggregator: Rename top-level request functions to avoid ambiguities
- aggregator_registry: Fix target-ID of base-hub
- aggregator: Enforce use of target-ID enum in device ID macros
- dtx: Use target-ID enum instead of hard-coding values
- aggregator_tabletsw: Use target-ID enum instead of hard-coding values
- aggregator_hub: Use target-ID enum instead of hard-coding values
- aggregator: Add target and source IDs to command trace events
- aggregator: Improve documentation and handling of message target and source IDs
platform/x86/amd:
- pmc: Add line break for readability
- pmc: differentiate STB/SMU messaging prints
- pmc: Write dummy postcode into the STB DRAM
- pmc: Add num_samples message id support to STB
platform/x86/amd/pmf:
- Add depends on CONFIG_POWER_SUPPLY
platform/x86/intel:
- Intel TPMI enumeration driver
platform/x86/intel/tpmi:
- ADD tpmi external interface for tpmi feature drivers
- Process CPU package mapping
platform/x86/intel/vsec:
- Use mutex for ida_alloc() and ida_free()
- Support private data
- Enhance and Export intel_vsec_add_aux()
- Add TPMI ID
platform_data/mlxreg:
- Add field with mapped resource address
think-lmi:
- Make kobj_type structure constant
- Use min_t() for comparison and assignment
tools/power/x86/intel-speed-select:
- v1.14 release
- Adjust uncore max/min frequency
- Add Emerald Rapid quirk
- Fix display of uncore min frequency
- turbo-freq auto mode with SMT off
- cpufreq reads on offline CPUs
- Use null-terminated string
- Remove duplicate dup()
- Handle open() failure case
- Remove unused non_block flag
- Remove wrong check in set_isst_id()
x86/platform/uv:
- Make kobj_type structure constant
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPzRpgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYPwf+I6PP0XBg8MrivLc2DHklVojUU0aX
/M0LbCP8gxCDdyisV8swC3e848riaTchYlUGASPZu0ieas1U7KsDvghkiittNvlI
U+0h7TbkOQNymM8oE0oauflH4W5KwCXGrLsJWVkGk0lhJd6WmjXkjWLkruaXazLd
kc5fq0QyzRVzhhCtocQ7qhIgXSZyKYx433VqbDR7/SUi5F2wkC9JbGY02maKWaK3
4lQaoyMKLjGlDr9YVv+UHTwLoXwP0mW/fjlsZ3Xz5lz6WfihQzPuOrl/10mRj0Ez
eP9dlF1Dipee4BYS2FM5dtk5xPpqdVqRlQUX2qKzyDNTSx5wdtJnv8j/cg==
=VoXq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
Add HVO support for RISC-V; see commit 6be24bed9d ("mm: hugetlb:
introduce a new config HUGETLB_PAGE_FREE_VMEMMAP"). This patch is
similar to commit 1e63ac088f ("arm64: mm: hugetlb: enable
HUGETLB_PAGE_FREE_VMEMMAP for arm64"), and riscv's motivation is the
same as arm64. The current riscv was ready to enable HVO after fixup,
ref commit d33deda095 ("riscv/mm: hugepage's PG_dcache_clean flag
is only set in head page").
See Documentation/mm/vmemmap_dedup.rst for more details.
The HugeTLB VmemmapvOptimization (HVO) defaults to off in Kconfig.
Here is the riscv test log:
cat /proc/sys/vm/hugetlb_optimize_vmemmap
echo 8 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
mount -t hugetlbfs none test/ -o pagesize=2048k
<Try some simple hugetlb test in test dir, no problem found.>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/linux-riscv/1F5AF29D-708A-483B-A29F-CAEE6F554866@linux.dev/
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230201015259.3222524-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* New drivers
- Driver cros_ec_uart for ChromeOS EC protocol over UART.
- Driver cros_typec_vdm for USB PD Vendor Defined Message.
* Improvements
- Preserve logs as much as possible when EC panic.
- Shutdown to refrain from potential HW damages when EC panic.
* Fixes
- Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE.
- Fix a lockdep false positive.
* Cleanups
- Use sysfs_emit*() instead of scnprintf().
- Use asm instead of asm-generic for unaligned.h.
* Misc
- Rename module name from cros_ec_typec to cros-ec-typec.
- Minor fixes.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCY+n3NxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0aF8A/RBFKFEJrKj1AkPlgSHnhCr41SmEsrqg
MaAH2x6Nw8YqAQCjSbJmanSzOHCO5HXF1P11elTNgqH0KT6/Xw/LIcL5Dw==
=pAno
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New drivers:
- cros_ec_uart for ChromeOS EC protocol over UART
- cros_typec_vdm for USB PD Vendor Defined Message
Improvements:
- Preserve logs as much as possible when EC panics
- Shutdown to refrain from potential HW damages when EC panics
Fixes:
- Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE
- Fix a lockdep false positive
Cleanups:
- Use sysfs_emit*() instead of scnprintf()
- Use asm instead of asm-generic for unaligned.h
Misc:
- Rename module name from cros_ec_typec to cros-ec-typec
- Minor fixes"
* tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_typec: Fix spelling mistake
platform/chrome: cros_typec_vdm: Add Attention support
platform/chrome: cros_ec: Add VDM attention headers
platform/chrome: cros_typec_vdm: Fix VDO copy
platform/chrome: cros_ec_typec: allow deferred probe of switch handles
platform/chrome: cros_ec_proto: remove big stub objects from stack
platform/chrome: cros_ec_uart: fix negative type promoted to high
platform/chrome: cros_ec: Use per-device lockdep key
platform/chrome: fix kernel-doc warnings for cros_ec_command
platform/chrome: fix kernel-doc warning for last_resume_result
platform/chrome: fix kernel-doc warning for suspend_timeout_ms
platform/chrome: fix kernel-doc warnings for panic notifier
platform/chrome: cros_ec_lpc: initialize the buf variable
platform/chrome: cros_ec: Fix panic notifier registration
platform/chrome: cros_typec_switch: Check for retimer flag
platform/chrome: cros_typec_switch: Use fwnode* prop check
platform/chrome: cros_typec_vdm: Add VDM send support
platform/chrome: cros_typec_vdm: Add VDM reply support
platform/chrome: cros_ec_typec: Add initial VDM support
platform/chrome: cros_ec_typec: Alter module name with hyphens
...
Add header include guards to insn.h to prevent repeating declaration of
any identifiers in insn.h.
Fixes: edde5584c7 ("riscv: Add SW single-step support for KDB")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes: c9c1af3f18 ("RISC-V: rename parse_asm.h to insn.h")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129094242.282620-1-liaochang1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Björn Töpel <bjorn@kernel.org> says:
From: Björn Töpel <bjorn@rivosinc.com>
RISC-V does not dump faulting instructions in the oops handler. This
series adds "Code:" dumps to the oops output together with
scripts/decodecode support.
* b4-shazam-merge:
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
Link: https://lore.kernel.org/r/20230119074738.708301-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If we patched auipc + jalr pair, we'd better proceed one more
instruction. Andrew pointed out "There's not a problem now, since
we're only adding a fixup for jal, not jalr, but we should
future-proof this and there's no reason to revisit an already fixed-up
instruction anyway."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230115162811.3146-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
This series tries to improve link time handling of riscv:
patch1 adds the missing RUNTIME_DISCARD_EXIT as suggested by Masahiro.
Similar as other architectures such as x86, arm64 and so on, enable
ARCH_WANT_LD_ORPHAN_WARN to enable linker orphan warnings to prevent
from missing any new sections in future. So the following two patches
are preparation ones, and the last patch finally selects
ARCH_WANT_LD_ORPHAN_WARN
* b4-shazam-merge:
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
Link: https://lore.kernel.org/r/20230119155417.2600-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While working on something else, I noticed that the kernel would start
accepting interrupts again after crashing in an interrupt handler. Since
the kernel is already in inconsistent state, enabling interrupts is
dangerous and opens up risk of kernel state deteriorating further.
Interrupts do get enabled via what looks like an unintended side effect of
spin_unlock_irq, so switch to the more cautious
spin_lock_irqsave/spin_unlock_irqrestore instead.
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230215144828.3370316-1-mnissler@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 21855cac82 ("riscv/mm: Prevent kernel module to access user
memory without uaccess routines") added early exits/deaths for page
faults stemming from accesses to user-space without using proper
uaccess routines (where sstatus.SUM is set).
Unfortunatly, this is too strict for some BPF programs, which relies
on BPF exhandler fixups. These BPF programs loads "BTF pointers". A
BTF pointers could either be a valid kernel pointer or NULL, but not a
userspace address.
Resolve the problem by calling the fixup handler in the early exit
path.
Fixes: 21855cac82 ("riscv/mm: Prevent kernel module to access user memory without uaccess routines")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214162515.184827-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Lee Jones