The non-cache mkeys are stored in the cache only to shorten restarting
application time. Don't store them longer than needed.
Configure cache entries that store non-cache MRs as temporary entries. If
30 seconds have passed and no user reclaimed the temporarily cached mkeys,
an asynchronous work will destroy the mkeys entries.
Link: https://lore.kernel.org/r/20230125222807.6921-7-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, when dereging an MR, if the mkey doesn't belong to a cache
entry, it will be destroyed. As a result, the restart of applications
with many non-cached mkeys is not efficient since all the mkeys are
destroyed and then recreated. This process takes a long time (for 100,000
MRs, it is ~20 seconds for dereg and ~28 seconds for re-reg).
To shorten the restart runtime, insert all cacheable mkeys to the cache.
If there is no fitting entry to the mkey properties, create a temporary
entry that fits it.
After a predetermined timeout, the cache entries will shrink to the
initial high limit.
The mkeys will still be in the cache when consuming them again after an
application restart. Therefore, the registration will be much faster
(for 100,000 MRs, it is ~4 seconds for dereg and ~5 seconds for re-reg).
The temporary cache entries created to store the non-cache mkeys are not
exposed through sysfs like the default cache entries.
Link: https://lore.kernel.org/r/20230125222807.6921-6-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch from using the mkey order to using the new struct as the key to the
RB tree of cache entries.
The key is all the mkey properties that UMR operations can't modify.
Using this key to define the cache entries and to search and create cache
mkeys.
Link: https://lore.kernel.org/r/20230125222807.6921-5-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the cache structure is a static linear array. Therefore, his
size is limited to the number of entries in it and is not expandable. The
entries are dedicated to mkeys of size 2^x and no access_flags. Mkeys with
different properties are not cacheable.
In this patch, we change the cache structure to an RB-tree. This will
allow to extend the cache to support more entries with different mkey
properties.
Link: https://lore.kernel.org/r/20230125222807.6921-4-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implicit ODP mkey doesn't have unique properties. It shares the same
properties as the order 18 cache entry. There is no need to devote a
special entry for that.
Link: https://lore.kernel.org/r/20230125222807.6921-3-michaelgur@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mkc.log_page_size can be changed using UMR. Therefore, don't treat it as a
cache entry property.
Removing it from struct mlx5_cache_ent.
All cache mkeys will be created with default PAGE_SHIFT, and updated with
the needed page_shift using UMR when passing them to a user.
Link: https://lore.kernel.org/r/20230125222807.6921-2-michaelgur@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Radxa Zero2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header
Signed-off-by: Yuntian Zhang <yt@radxa.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Radxa Zero2 is a small form-factor SBC using the Amlogic
A311D chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
BPI-M2-PRO is based upon the BPI-M5 design except for a different
physical board layout and the following changes:
- USB 3.0 ports reduced from 4x to 2x
- 3.5mm Combined CVBS/Audio Jack removed
- RTL8821BU WiFi/BT module (internal USB connected)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-6-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
BPI-M2-PRO is based upon the BPI-M5 using the Amlogic SM1 (S905X3) chipset.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-5-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Convert the BPI-M5 dts into meson-sm1-bananapi.dtsi to support the
addition of new boards based on the same design.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-4-christianshewitt@gmail.com
[narmstrong: fixed adc-keys node name]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The sound device is enabled by default so remove the redundant status.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN
and VDDIO_C pins to be switched to high impedance mode. This can be achieved
using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode
and retain high state (pin has the pull-up).
This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been
used to resolve similar problems with the Odroid C4 board (TF_IO in the C4
dts is the equivalent regulator).
Fixes: 976e920183 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When calling spidev_message() from the one of the ioctl() callbacks, the
spi_lock is already taken. When we then end up calling spidev_sync(), we
get the following splat:
[ 214.047619]
[ 214.049198] ============================================
[ 214.054533] WARNING: possible recursive locking detected
[ 214.059858] 6.2.0-rc3-0.0.0-devel+git.97ec4d559d93 #1 Not tainted
[ 214.065969] --------------------------------------------
[ 214.071290] spidev_test/1454 is trying to acquire lock:
[ 214.076530] c4925dbc (&spidev->spi_lock){+.+.}-{3:3}, at: spidev_ioctl+0x8e0/0xab8
[ 214.084164]
[ 214.084164] but task is already holding lock:
[ 214.090007] c4925dbc (&spidev->spi_lock){+.+.}-{3:3}, at: spidev_ioctl+0x44/0xab8
[ 214.097537]
[ 214.097537] other info that might help us debug this:
[ 214.104075] Possible unsafe locking scenario:
[ 214.104075]
[ 214.110004] CPU0
[ 214.112461] ----
[ 214.114916] lock(&spidev->spi_lock);
[ 214.118687] lock(&spidev->spi_lock);
[ 214.122457]
[ 214.122457] *** DEADLOCK ***
[ 214.122457]
[ 214.128386] May be due to missing lock nesting notation
[ 214.128386]
[ 214.135183] 2 locks held by spidev_test/1454:
[ 214.139553] #0: c4925dbc (&spidev->spi_lock){+.+.}-{3:3}, at: spidev_ioctl+0x44/0xab8
[ 214.147524] #1: c4925e14 (&spidev->buf_lock){+.+.}-{3:3}, at: spidev_ioctl+0x70/0xab8
[ 214.155493]
[ 214.155493] stack backtrace:
[ 214.159861] CPU: 0 PID: 1454 Comm: spidev_test Not tainted 6.2.0-rc3-0.0.0-devel+git.97ec4d559d93 #1
[ 214.169012] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 214.175555] unwind_backtrace from show_stack+0x10/0x14
[ 214.180819] show_stack from dump_stack_lvl+0x60/0x90
[ 214.185900] dump_stack_lvl from __lock_acquire+0x874/0x2858
[ 214.191584] __lock_acquire from lock_acquire+0xfc/0x378
[ 214.196918] lock_acquire from __mutex_lock+0x9c/0x8a8
[ 214.202083] __mutex_lock from mutex_lock_nested+0x1c/0x24
[ 214.207597] mutex_lock_nested from spidev_ioctl+0x8e0/0xab8
[ 214.213284] spidev_ioctl from sys_ioctl+0x4d0/0xe2c
[ 214.218277] sys_ioctl from ret_fast_syscall+0x0/0x1c
[ 214.223351] Exception stack(0xe75cdfa8 to 0xe75cdff0)
[ 214.228422] dfa0: 00000000 00001000 00000003 40206b00 bee266e8 bee266e0
[ 214.236617] dfc0: 00000000 00001000 006a71a0 00000036 004c0040 004bfd18 00000000 00000003
[ 214.244809] dfe0: 00000036 bee266c8 b6f16dc5 b6e8e5f6
Fix it by introducing an unlocked variant of spidev_sync() and calling it
from spidev_message() while other users who don't check the spidev->spi's
existence keep on using the locking flavor.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Fixes: 1f4d2dd45b ("spi: spidev: fix a race condition when accessing spidev->spi")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Link: https://lore.kernel.org/r/20230116144149.305560-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to using the u16 type in the min_t() macros the SPI transfer length
will be cast to word before participating in the conditional statement
implied by the macro. Thus if the transfer length is greater than 64KB the
Tx/Rx FIFO threshold level value will be determined by the leftover of the
truncated after the type-case length. In the worst case it will cause the
dramatical performance drop due to the "Tx FIFO Empty" or "Rx FIFO Full"
interrupts triggered on each xfer word sent/received to/from the bus.
The problem can be easily fixed by specifying the unsigned int type in the
min_t() macros thus preventing the possible data loss.
Fixes: ea11370fff ("spi: dw: get TX level without an additional variable")
Reported-by: Sergey Nazarov <Sergey.Nazarov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113185942.2516-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.
Signed-off-by: xurui <xurui@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Both 1 and 2 are valid values for #address-cells and #size-cells on the
various busses specified in these bindings, so explicitly allow 2.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
DW eDMA v4.70a and older have the read and write channels context CSRs
indirectly accessible, which means CSRs like Channel Control, Xfer size,
SAR, DAR and LLP address are accessed at a fixed MMIO address, with their
reference to the corresponding channel determined by the Viewport CSR. To
have a coherent access to these registers the CSR IOs are supposed to be
protected with a spinlock. DW eDMA v4.80a and newer normally have unrolled
Read/Write channel context registers, with these CSRs directly mapped in
the controller MMIO space.
Both normal and viewport-based registers are exposed via debugfs nodes, and
the original algorithm was based on the unrolled CSRs mapping and
recalculated the viewport addresses when required. This is unscalable (it
only supports a platform with a single eDMA since a base address is
statically preserved) and also needlessly overcomplicated (it loops over
all Rd/Wr context addresses and recalculates the viewport base address on
each debugfs node access).
Simplify the algorithm by adding the channel ID and its direction fields in
the eDMA debugfs node descriptor. These new fields can be used to find a
CSR offset in the channel register space. The DW eDMA debugfs node getter
will also use them to activate the respective context CSRs viewport before
reading data from the specified register. For the unrolled CSR mapping, no
spinlock or viewport activation is needed.
Note: this replaces some REGISTER() uses with CTX_REGISTER(), which avoids
an implicit dependency on a local variable name. The same problem with the
rest of the macro will be fixed in the next commit.
Link: https://lore.kernel.org/r/20230113171409.30470-16-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Since we are about to add the eDMA channels direction support to the
debugfs module it will be confusing to have both the debugfs directory and
the channels direction short names used in the same code.
Rename the debugfs dentry 'dir' variables to 'dent' to prevent confusion.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230113171409.30470-15-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Currently DW eDMA debugfs node descriptors are allocated on the stack,
which won't work for multi-eDMA platforms. As a preparation to supporting
multi-eDMA systems, allocate each debugfs node separately. Afterwards
we'll add info like Read/Write channel flag, channel ID, DW eDMA private
data reference.
Note: this conversion is mainly required due to having the legacy DW eDMA
controllers with indirect Read/Write channels context CSRs access. If we
didn't need to synchronize access to these registers, the debugfs code of
the driver would have been much simpler.
Link: https://lore.kernel.org/r/20230113171409.30470-14-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Other local names include a "dw_edma" prefix.
Add a "dw_edma" prefix to the debugfs_entries structure, too, so it won't
be confused with global debugfs things.
Link: https://lore.kernel.org/r/20230113171409.30470-13-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The debugfs_create_*() functions never return NULL, so checking their
return value for NULL is pointless. Secondly, the debugfs subsystem is
designed to be as simple as possible, so if one of the debugfs_create_*()
method in a hierarchy fails, the following methods should silently return
the passed erroneous parental dentry. Finally, the code should work no
matter whether anything debugfs-related fails.
To make code simpler and debugfs-independent, stop checking the
debugfs_create_*() return values.
If the debugfs file system is unavailable, skip the debugfs node
initialization altogether to preserve some memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-12-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The debugfs_entries structure declared in dw-edma-v0-debugfs.c contains the
debugfs node register address. The address is declared as dma_addr_t type,
but is cast to "void *".
Change the type to "void __iomem *" and drop the unnecessary casts.
Link: https://lore.kernel.org/r/20230113171409.30470-11-Sergey.Semin@baikalelectronics.ru
Fixes: 305aebeff8 ("dmaengine: Add Synopsys eDMA IP version 0 debugfs support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The DMA engine core manages dma_device.chancnt itself, e.g., in
dma_async_device_register(). DMA device drivers should not initialize
chancnt because it causes the wrong number of channels printed in the
device summary.
Drop the dw-edma chancnt initialization.
Link: https://lore.kernel.org/r/20230113171409.30470-10-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The Synopsys PCIe Endpoint IP prototype kit can be attached via any PCI
host controller, including one where the PCI bus address space is different
from the CPU address space. Therefore, we need to make sure the source and
destination addresses of the DMA slave devices are converted to the PCI bus
address space; otherwise DMA transactions may cause memory corruption.
Add a new dw_edma_pcie_address() interface to perform this translation by
using pcibios_resource_to_bus().
Link: https://lore.kernel.org/r/20230113171409.30470-9-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2a ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Since 9575632052 ("dmaengine: make slave address physical"), the source
and destination addresses of the DMA slave device have been converted to
physical addresses in the CPU address space. It's the DMA device driver's
responsibility to convert them to the DMA bus address space. In case of the
DW eDMA device, the source or destination peripheral (slave) devices reside
in PCI bus space. Thus we need to perform the PCI Host/Endpoint windows-
based (i.e. DT "ranges" property) address translation; otherwise the eDMA
transactions won't work as expected (or can be even harmful) if the CPU and
PCI address spaces don't match.
Note 1: Even though the DMA interleaved template has both source and
destination addresses declared as dma_addr_t, only the CPU memory range
should be mapped to be seen by the DMA device since it's a subject of the
DMA getting towards the system side. The device part must not be mapped
since the slave device resides in the PCI bus space, which isn't affected
by IOMMUs or iATU translations. DW PCIe eDMA generates corresponding
MWr/MRd TLPs on its own.
Note 2: This functionality is mainly required for the remote eDMA setup
since the CPU address must be manually translated into the PCI bus space
before being written to LLI.{SAR,DAR}. If eDMA is embedded in the locally
accessible DW PCIe Root Port/Endpoint, software-based translation isn't
required since hardware will translate it via the Outbound iATU as long as
the DMA_BYPASS flag is cleared. If DMA_BYPASS is set or there is no
Outbound iATU entry that contains the SAR or DAR (for Read and Write
channel respectively), there won't be any translation performed but DMA
will proceed with the corresponding source/destination address as-is.
Link: https://lore.kernel.org/r/20230113171409.30470-8-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The interleaved DMA transfer support added by 85e7518f42 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support") seems contradictory to
what the DMA engine defines. The next conditional statements:
if (!xfer->xfer.il->numf)
return NULL;
if (xfer->xfer.il->numf > 0 && xfer->xfer.il->frame_size > 0)
return NULL;
mean that numf can't be zero and frame_size must always be zero, otherwise
the transfer won't be executed. Furthermore, the transfer execution method
takes the frame size from the dma_interleaved_template.sgl[] array for each
frame. That array in accordance with [1] is supposed to be of
dma_interleaved_template.frame_size size, which as we discovered before the
code expects to be zero. So judging by the dw_edma_device_transfer()
implementation, the method implies the dma_interleaved_template.sgl[] array
being of dma_interleaved_template.numf size, which is wrong. Since the
dw_edma_device_transfer() method doesn't permit
dma_interleaved_template.frame_size being non-zero, the multi-chunk
interleaved transfer turns to be unsupported even though the code implies
having it supported.
Add fully functioning support of interleaved DMA transfers.
First of all, dma_interleaved_template.frame_size is supposed to be greater
or equal to one thus having at least simple linear chunked frames.
Secondly, we can create a walk-through over all the chunks and frames by
initializing the number of the eDMA burst transactions as a multiple of
dma_interleaved_template.numf and dma_interleaved_template.frame_size and
getting the frame_size-modulo of the iteration step as an index of the
dma_interleaved_template.sgl[] array.
[1] include/linux/dmaengine.h: doc struct dma_interleaved_template
Link: https://lore.kernel.org/r/20230113171409.30470-7-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The DW eDMA controller always increments both source and destination
addresses. Permitting DMA interleaved transfers with no src_inc/dst_inc
flags set may lead to unexpected behaviour for the device users.
Terminate interleaved transfers if at least one of the
dma_interleaved_template.{src_inc,dst_inc} flag is initialized to "false".
Note that in addition, we need to increase the source and destination
addresses after each iteration.
Link: https://lore.kernel.org/r/20230113171409.30470-6-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Interleaved DMA transfer support was added by 85e7518f42 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.
Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.
Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The dw_edma_region.paddr field should be a memory base address visible by
the DW eDMA controller. If the DMA engine is embedded in the DW PCIe
Host/Endpoint controller, the address should belong to the Local CPU/
Application memory. If eDMA is remotely accessible across the PCI bus via
PCI memory IOs, the address should be part of the PCI bus memory space.
The latter case hasn't been well covered in the corresponding glue-driver.
Since pci_dev.resource[] contains resources defined in the CPU memory
space, they need to be converted to the PCI bus address space. Convert the
LL, DT and CSRs PCI memory ranges with pci_bus_address().
In addition, extend the dw_edma_region.paddr field size. The field normally
contains a memory range base address to be set in the DW eDMA Linked-List
pointer register or as a base address of the Linked-List data buffer. In
accordance with [1] the LL range is supposed to be created in the Local
CPU/Application memory, but depending on the DW eDMA utilization the memory
can be created as a part of the PCI bus address space (as in the case of
the DW PCIe Endpoint prototype kit).
In the former case dw_edma_region.paddr should be a dma_addr_t, while in
the latter one it should be a pci_bus_addr_t. Since the corresponding CSRs
are always 64 bits wide, convert dw_edma_region.paddr to be u64, and let
the client make sure it has a valid address visible by the DW eDMA
controller. For instance, the DW eDMA PCIe glue-driver initializes the
field with addresses from the PCI bus memory space.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1103
Link: https://lore.kernel.org/r/20230113171409.30470-4-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2a ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
If dw_edma_irq_request() fails to initialize an IRQ handler, any previously
requested IRQs will be left initialized.
Release the previously requested IRQs in the cleanup-on-error path of
dw_edma_irq_request().
Link: https://lore.kernel.org/r/20230113171409.30470-3-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The dst_addr member of the dma_slave_config structure has been mistakenly
marked as ignored if the *source* address belongs to the memory. That is
relevant to the src_addr field of the structure, while the dst_addr field
contains a destination device address that should be ignored if the
destination is the CPU memory.
Correct the @dst_addr description accordingly.
Link: https://lore.kernel.org/r/20230113171409.30470-2-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Given commit e441273947 ("Documentation: raise minimum supported
version of binutils to 2.25"), CONFIG_MIPS_LD_CAN_LINK_VDSO is always
'y'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Replace struct rxe-phys_buf and struct rxe_map by struct xarray
in rxe_verbs.h. This allows using rcu locking on reads for
the memory maps stored in each mr.
This is based off of a sketch of a patch from Jason Gunthorpe in the
link below. Some changes were needed to make this work. It applies
cleanly to the current for-next and passes the pyverbs, perftest
and the same blktests test cases which run today.
Link: https://lore.kernel.org/r/20230119235936.19728-7-rpearsonhpe@gmail.com
Link: https://lore.kernel.org/linux-rdma/Y3gvZr6%2FNCii9Avy@nvidia.com/
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The CPUs in these SoCs support MIPS32 R2, and allow ebase relocation.
Even if the default exception base of 0x80000000 is used, the
MIPS_GENERIC load address of 0x80100000 leaves sufficient space to not
need an extra 0x400 bytes of padding.
Suggested-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Console output currently looks like USB clocks initialized succesfully
even in case of error. Fix that and use consistently dev_err for fatal
errors otherwise dev_warn.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Drop the iommus and dma-coherent properties for the I2C controller
device tree nodes. These are only needed for the device tree nodes
that represent the GPC DMA controller, since that is the device
performing the direct memory accesses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Fixes: 459c7c565a ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Function glock_clear_object() checks if the specified glock is still
pointing at the right object and clears the gl_object pointer. To
handle the case of incompletely constructed inodes, glock_clear_object()
also allows gl_object to be NULL.
However, in the teardown case, when iget_failed() is called and the
inode is removed from the inode hash, by the time we get to the
glock_clear_object() calls in gfs2_put_super() and its helpers, we don't
have exclusion against concurrent gfs2_inode_lookup() and
gfs2_create_inode() calls, and the inode and iopen glocks may already be
pointing at another inode, so the checks in glock_clear_object() are
incorrect.
To better handle this case, always completely disassociate an inode from
its glocks before tearing it down. In addition, get rid of a duplicate
glock_clear_object() call in gfs2_evict_inode(). That way,
glock_clear_object() will only ever be called when the glock points at
the current inode, and the NULL check in glock_clear_object() can be
removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: 31c5558dae ("drm/mediatek: Refactor plane init")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221205095115.2905090-1-ruanjinjie@huawei.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.
In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.
Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Michael Guralnik