usb_ops_linux.h has a number of defines that strip the regs parameter from
function that should be used as urb callbacks.
Remove the defines for functions that don't exist in the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230124210108.62170-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the regs parameter from usb_read_port_complete, it is not used.
Without the regs parameter, there's no need for the define that makes
usb_read_port_complete usable as urb callback function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230124210108.62170-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
num_process_phyinfo, received_bwtype and rxoverflow are initialized and
increased but never read. Remove dead code. As a result prxsc is unused
which in result makes rxsc_sgien_exflg unused. Remove prxsc and
rxsc_sgien_exflg as well.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/ff9daec237b795a01629080d0d5f7ec73b2d89da.1674675808.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
numpacket_toself, numpacket_matchbssid and received_preamble_GI are
initialized and increased but never read. Remove dead code. As a result
the local variable preamble_guardinterval is unused. Remove it also.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0ed5f4134176393110fdb0b7424df7a8a6fc6262.1674675808.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During sending the base address of the slots to the VideoCore
firmware via mailbox property, issues could happened on the ARM
and on the VideoCore side. So better separate the error handling
in order to provide more details. This should help to narrow
down the possible cause.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20230123191629.21019-1-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_free_hwxmits is called only by _rtw_free_xmit_priv. We can merge the
two functions and make the code a bit shorter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-24-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
apsd_setting in struct tx_servq is not used, it can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-23-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct agg_pkt_info is not used in the r8188eu driver. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-22-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_xmitframe_enqueue function is only one line. We can remove it and
call rtw_xmit_classifier directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-21-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function rtw_xmitframe_enqueue, we can simply relay the error code from
rtw_xmit_classifier.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-20-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct hw_xmit's sta_list points to one of vo, vi, be or bk_pending in
struct xmit_priv. All of these are defined as struct __queue, which is a
list plus a spinlock.
For these components, the spinlock is unused, we need only the list.
This patch converts sta_list and vo, vi, be and bk_pending to struct
list_head.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-19-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dequeue_one_xmitframe is a small function that is called only from
rtw_dequeue_xframe. Merge the two functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The r8188eu driver defines a struct __queue that contains a list_head and
a spinlock.
struct tx_servq describes a station for which we have pending tx packets.
This struct contains a __queue for the pending packets (a __queue of
struct xmit_frame entries). In this particular case, the queue's spinlock
is not used, we need only the list_head.
rtw_dequeue_xframe uses a local variable for such an xmit_frame queue.
This patch replaces this variable with a list_head.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the dequeue_one_xmitframe function without changing its
behaviour. Drop the temporary variable xmitframe_plist.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_dequeue_xframe calls dequeue_one_xmitframe and passes a struct
tx_servq. The only use for this parameter is to decrement its qcnt if an
xmit_frame could be extracted.
It makes more sense to remove the struct tx_servq parameter from
dequeue_one_xmitframe and decrement qcnt in the calling function when
dequeue_one_xmitframe returns success, i.e. when an xmit_frame was
extracted.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both callers of rtw_chk_hi_queue_cmd do not check the return value.
Convert rtw_chk_hi_queue_cmd to a void function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-14-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtl8188eu_xmitframe_complete function takes two parameters: adapter
and xmit_priv. xmit_priv is part of struct adapter, this parameter can be
removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert the if condition and exit immediately if the list of xmitframes
is empty. Hopefully, this makes the code a little bit simpler.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use list_empty to check for an empty list instead of coding the check
manually.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no point in moving xmitframe_plist to the next list element.
xmitframe_plist is not used any more after this assignment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pxmitpriv parameter in function dequeue_one_xmitframe is not needed.
It can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an obsolete comment in rtw_dequeue_xframe. There is no break
statement any more.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the code to initialise the inx array in function
rtw_dequeue_xframe and make the code a tiny bit smaller.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use list_for_each_entry_safe to iterate over the station entries in
function rtw_dequeue_xframe instead of coding the loop manually.
We have to use the safe version, the loop body may remove a station from
the list over which we iterate.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct intf_priv is not used in the r8188eu driver. It can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no more users of struct intf_hdl in the r8188eu driver. We can
now remove this struct.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_write function takes a struct intf_hdl only to extract the struct
adapter from it. We can pass struct adapter directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct xmit_priv contains a pointer to an array of struct hw_xmit entries.
xmit_priv's (ill-named) hwxmit_entry component stores the size of this
array, i.e. the number of hw_xmit entries that are used.
The array size is constant, it's initialised to HWXMIT_ENTRY and never
updated. Simplify the code accordingly. Remove hwxmit_entry, do not pass
the array size as a function parameter and use HWXMIT_ENTRY in the code
that handles the array.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230123205342.229589-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After discussions internally at the company, Javier has been volunteered
and is willing to be the embargoed hardware contact for Samsung.
Cc: Javier González <javier.gonz@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof.c@samsung.com>
Acked-by: Javier González <javier.gonz@samsung.com>
Link: https://lore.kernel.org/r/20230123215255.381312-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We change recently the memalloc helper to use
dma_alloc_noncontiguous() and the fallback to get_pages(). Although
lots of issues with IOMMU (or non-IOMMU) have been addressed, but
there seems still a regression on Xen PV. Interestingly, the only
proper way to work is use dma_alloc_coherent(). The use of
dma_alloc_coherent() for SG buffer was dropped as it's problematic on
IOMMU systems. OTOH, Xen PV has a different way, and it's fine to use
the dma_alloc_coherent().
This patch is a workaround for Xen PV. It consists of the following
changes:
- For Xen PV, use only the fallback allocation without
dma_alloc_noncontiguous()
- In the fallback allocation, use dma_alloc_coherent();
the DMA address from dma_alloc_coherent() is returned in get_addr
ops
- The DMA addresses are stored in an array; the first entry stores the
number of allocated pages in lower bits, which are referred at
releasing pages again
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Fixes: 9736a32513 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Link: https://lore.kernel.org/r/87tu256lqs.wl-tiwai@suse.de
Link: https://lore.kernel.org/r/20230125153104.5527-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functional changes.
Adjust to comply with dt-schema requirements
and make it possible to validate values.
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230126193732.69699-1-david@ixit.cz
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The build system currently complains:
scripts/Makefile.build:252: drivers/net/dsa/ocelot/Makefile:
felix.o is added to multiple modules: mscc_felix mscc_seville
Since felix.c holds the DSA glue layer, create a mscc_felix_dsa_lib.ko.
This is similar to how mscc_ocelot_switch_lib.ko holds a library for
configuring the hardware.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230125145716.271355-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
virtchnl: update and refactor
Jesse Brandeburg says:
The virtchnl.h file is used by i40e/ice physical function (PF) drivers
and irdma when talking to the iavf driver. This series cleans up the
header file by removing unused elements, adding/cleaning some comments,
fixing the data structures so they are explicitly defined, including
padding, and finally does a long overdue rename of the IWARP members in
the structures to RDMA, since the ice driver and it's associated Intel
Ethernet E800 series adapters support both RDMA and IWARP.
The whole series should result in no functional change, but hopefully
clearer code.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: i40e/iavf: rename iwarp to rdma
virtchnl: do structure hardening
virtchnl: update header and increase header clarity
virtchnl: remove unused structure declaration
====================
Link: https://lore.kernel.org/r/20230125212441.4030014-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel crash was caused by a BPF program attached to the
"lsm_cgroup/socket_sock_rcv_skb" hook, which performed a call to
`bpf_setsockopt()` in order to set the TCP_NODELAY flag as an
example. Flags like TCP_NODELAY can prompt the kernel to flush a
socket's outgoing queue, and this hook
"lsm_cgroup/socket_sock_rcv_skb" is frequently triggered by
softirqs. The issue was that in certain circumstances, when
`tcp_write_xmit()` was called to flush the queue, it would also allow
BH (bottom-half) to run. This could lead to our program attempting to
flush the same socket recursively, which caused a `skbuff` to be
unlinked twice.
`security_sock_rcv_skb()` is triggered by `tcp_filter()`. This occurs
before the sock ownership is checked in `tcp_v4_rcv()`. Consequently,
if a bpf program runs on `security_sock_rcv_skb()` while under softirq
conditions, it may not possess the lock needed for `bpf_setsockopt()`,
thus presenting an issue.
The patch fixes this issue by ensuring that a BPF program attached to
the "lsm_cgroup/socket_sock_rcv_skb" hook is not allowed to call
`bpf_setsockopt()`.
The differences from v1 are
- changing commit log to explain holding the lock of the sock,
- emphasizing that TCP_NODELAY is not the only flag, and
- adding the fixes tag.
v1: https://lore.kernel.org/bpf/20230125000244.1109228-1-kuifeng@meta.com/
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Fixes: 9113d7e48e ("bpf: expose bpf_{g,s}etsockopt to lsm cgroup")
Link: https://lore.kernel.org/r/20230127001732.4162630-1-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.
Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f3 ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During suspend and resume, the channel state needs to be saved locally.
Otherwise, the endpoint may access the channels while they were being
suspended and causing access violations.
Fix it by saving the channel state locally during suspend and resume.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f3 ("bus: mhi: ep: Add support for suspending and resuming channels")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com)
Link: https://lore.kernel.org/r/20221228161704.255268-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is a good chance that while the channel ring gets processed, the STOP
or RESET command for the channel might be received from the MHI host. In
those cases, the entire channel ring processing needs to be protected by
chan->lock to prevent the race where the corresponding channel ring might
be reset.
While at it, let's also add a sanity check to make sure that the ring is
started before processing it. Because, if the STOP/RESET command gets
processed while mhi_ep_ch_ring_worker() waited for chan->lock, the ring
would've been reset.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 03c0bb8ec9 ("bus: mhi: ep: Add support for processing channel rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The debug log incorrectly mentions that STOP command is received instead of
RESET command. Fix that.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e827569062 ("bus: mhi: ep: Add support for processing command rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Before processing the command ring for the channel, check if the channel is
supported by the controller or not.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During graceful shutdown scenario, host will issue MHI RESET to the
endpoint device before initiating shutdown. In that case, it makes sense
to completely power down the MHI stack as sooner or later the access to
MMIO registers will be prohibited. Also, the stack needs to be powered
up in the case of SYS_ERR to recover the device.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Martin Kaiser