This is not something that should be manually updated.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "Kbuild syntax for exported headers" section should not be under
"Architecture Makefiles" in hierarchy. Bump the header underline from
"-" to "=".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The MAINTAINERS repository entry specifies "kconfig" as the branch, but
the repository itself has "kbuild".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
$(tmp-target) is a better fit for local use like this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
scripts/ is a better place to generate files used treewide.
With target.json moved to scripts/, you do not need to add target.json
to no-clean-files or MRPROPER_FILES.
'make clean' does not visit scripts/, but 'make mrproper' does.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
fixdep is designed only for parsing text files. read_file() appends
a terminating null byte ('\0') and parse_config_file() calls strstr()
to search for CONFIG options.
rustc outputs *.rlib, *.rmeta, *.so to dep-info. fixdep needs them in
the dependency, but there is no point in parsing such binary files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
The dep files (*.d files) emitted by C compilers usually contain the
deduplicated list of included files.
One exceptional case is when a header is included by the -include
command line option, and also by #include directive.
For example, the top Makefile adds the command line option,
"-include $(srctree)/include/linux/kconfig.h". You do not need to
include <linux/kconfig.h> in every source file.
In fact, include/linux/kconfig.h is listed twice in many .*.cmd files
due to include/linux/xarray.h having "#include <linux/kconfig.h>".
I did not fix that since it is a small redundancy.
However, this is more annoying for rustc. rustc emits the dependency
for each emission type.
For example, cmd_rustc_library emits dep-info, obj, and metadata.
So, the emitted *.d file contains the dependency for those 3 targets,
which makes fixdep parse the same file 3 times.
$ grep rust/alloc/raw_vec.rs rust/.alloc.o.cmd
rust/alloc/raw_vec.rs \
rust/alloc/raw_vec.rs \
rust/alloc/raw_vec.rs \
To skip the second parsing, this commit adds a hash table for parsed
files, just like we did for CONFIG options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Change the hash table code so it will be easier to add the second table.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
rustc may put comments in dep-info, so sed is used to drop them before
passing it to fixdep.
Now that fixdep can remove comments, Makefiles do not need to run sed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
fixdep parses dependency files (*.d) emitted by the compiler.
*.d files are Makefiles describing the dependencies of the main source
file.
fixdep understands minimal Makefile syntax. It works well enough for
GCC and Clang, but not for rustc.
This commit improves the parser a little more for better processing
comments, escape sequences, etc.
My main motivation is to drop comments. rustc may output comments
(e.g. env-dep). Currentyly, rustc build rules invoke sed to remove
comments, but it is more efficient to do it in fixdep.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
In Kbuild, two different rules must not write to the same file, but
it happens when compiling rust source files.
For example, set CONFIG_SAMPLE_RUST_MINIMAL=m and run the following:
$ make -j$(nproc) samples/rust/rust_minimal.o samples/rust/rust_minimal.rsi \
samples/rust/rust_minimal.s samples/rust/rust_minimal.ll
[snip]
RUSTC [M] samples/rust/rust_minimal.o
RUSTC [M] samples/rust/rust_minimal.rsi
RUSTC [M] samples/rust/rust_minimal.s
RUSTC [M] samples/rust/rust_minimal.ll
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:334: samples/rust/rust_minimal.ll] Error 1
make[3]: *** Waiting for unfinished jobs....
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:309: samples/rust/rust_minimal.o] Error 1
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:326: samples/rust/rust_minimal.s] Error 1
make[2]: *** [scripts/Makefile.build:504: samples/rust] Error 2
make[1]: *** [scripts/Makefile.build:504: samples] Error 2
make: *** [Makefile:2008: .] Error 2
The reason for the error is that 4 threads running in parallel renames
the same file, samples/rust/rust_minimal.d.
This does not happen when compiling C or assembly files because
-Wp,-MMD,$(depfile) explicitly specifies the dependency filepath.
$(depfile) is a unique path for each target.
Currently, rustc is only given --out-dir and --emit=<list-of-types>
So, all the rust build rules output the dep-info into the default
<CRATE_NAME>.d, which causes the path conflict.
Fortunately, the --emit option is able to specify the output path
individually, with the form --emit=<type>=<path>.
Add --emit=dep-info=$(depfile) to the common part. Also, remove the
redundant --out-dir because the output path is specified for each type.
The code gets much cleaner because we do not need to rename *.d files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Remove _host*_flags. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
cmd_dt_S_dtb and cmd_dt_S_dtbo are almost the same; the only difference
is the prefix of the begin/end symbols. (__dtb vs __dtbo)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The cmd-check for KBUILD_NOCMDDEP=1 may not be clear until you see
commit c4d5ee1398 ("kbuild: make KBUILD_NOCMDDEP=1 handle empty
built-in.o").
When a phony target (i.e. FORCE) is the only prerequisite, Kbuild
uses a tricky way to detect that the target does not exist.
Add more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The cmd-check macro compares $(cmd_$@) and $(cmd_$1), but a pitfall is
that you cannot use cmd_<target> as the variable name for the command.
For example, the following code will not work in the top Makefile
or ./Kbuild.
quiet_cmd_foo = GEN $@
cmd_foo = touch $@
targets += foo
foo: FORCE
$(call if_changed,foo)
In this case, both $@ and $1 are expanded to 'foo', so $(cmd_check)
is always empty.
We do not need to use the same prefix for cmd_$@ and cmd_$1.
Rename the former to savedcmd_$@.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The top .gitignore comments about how to detect files breaking
.gitignore rules, but people rarely care about it.
Add a new W=1 warning to detect files that are tracked but ignored by
git. If git is not installed or the source tree is not tracked by git
at all, this script does not print anything.
Running it on v6.2-rc1 detected the following:
$ make W=1 misc-check
Documentation/devicetree/bindings/.yamllint: warning: ignored by one of the .gitignore files
drivers/clk/.kunitconfig: warning: ignored by one of the .gitignore files
drivers/gpu/drm/tests/.kunitconfig: warning: ignored by one of the .gitignore files
drivers/hid/.kunitconfig: warning: ignored by one of the .gitignore files
fs/ext4/.kunitconfig: warning: ignored by one of the .gitignore files
fs/fat/.kunitconfig: warning: ignored by one of the .gitignore files
kernel/kcsan/.kunitconfig: warning: ignored by one of the .gitignore files
lib/kunit/.kunitconfig: warning: ignored by one of the .gitignore files
mm/kfence/.kunitconfig: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/Makefile: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/run_tags_test.sh: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/tags_test.c: warning: ignored by one of the .gitignore files
These are ignored by the '.*' or 'tags' in the top .gitignore, but
there is no rule to negate it.
You might be tempted to do 'git add -f' but I want to have the real
issue fixed (by fixing a .gitignore, or by renaming files, etc.).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Recent git versions do not accept the noted command.
$ git ls-files -i --exclude-standard
fatal: ls-files -i must be used with either -o or -c
The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").
Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.
git-ls-files(1) says:
--exclude-standard
Add the standard Git exclusions: .git/info/exclude, .gitignore in
each directory, and the user's global exclusion file.
We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.
We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
More than one year has passed since the copied *.[cS] files were
removed from arch/*/boot/compressed/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The top Makefile sets KBUILD_VERBOSE to 0 by default, it looks weird
now because V=1 and V=2 can be OR'ed as V=12. The default should be
empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit a6de553da0 ("kbuild: Allow to combine multiple W= levels")
supported W=123 to enable all the extra warning groups.
I think a similar idea is applicable to the V= option.
V=1 echos the whole command
V=2 prints the reason for rebuilding
These are orthogonal, and can be enabled at the same time.
This commit supports V=12 to enable both of them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Some scripts increase the verbose level when V=1, but others when
not V=0.
I think the former is correct because V=2 is not a log level but
a switch to print the reason for rebuilding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
"make V=1" prints the whole command instead of the short log, but I
think it is nicer to print both so that you can easily spot the build
rule of your interest.
This commit changes V=1 to print the short log (the line starts with
'#'), followed by the full log.
In parallel builds, the short/full logs from the same build rule may
be interspersed. If you want to avoid it, please add -Otarget option.
Kbuild will never set it by default because Make would buffer the logs
and lose the escape sequences. (Modern compilers print warnings and
errors in color, but only when they write to a terminal.)
This is also a preparation for supporting V=12 because V=2 appends the
reason for rebuilding to the short log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-3-cbranchereau@gmail.com
Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-2-cbranchereau@gmail.com
LLVM 16 will have support for this flag so move it out of the GCC-only
block to allow LLVM builds to take advantage of it.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1665
Link: 6f867f9102
Link: https://lore.kernel.org/r/20230120165826.2469302-1-nathan@kernel.org
Xen on x86 boots dom0 in EFI mode but without providing a memory map.
This means that some consistency checks we would like to perform on
configuration tables or other data structures in memory are not
currently possible. Xen does, however, expose EFI memory descriptor
info via a Xen hypercall, so let's wire that up instead. It turns out
that the returned information is not identical to what Linux's
efi_mem_desc_lookup would return: the address returned is the address
passed to the hypercall, and the size returned is the number of bytes
remaining in the configuration table. However, none of the callers of
efi_mem_desc_lookup() currently care about this. In the future, Xen may
gain a hypercall that returns the actual start address, which can be
used instead.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The ESRT code currently contains two consistency checks on the memory
descriptor it obtains, but one of them is both incomplete and can only
trigger on invalid descriptors.
So let's drop these checks, and instead disregard descriptors entirely
if the start address is misaligned, or if the number of pages reaches
to or beyond the end of the address space. Note that the memory map as
a whole could still be inconsistent: multiple entries might cover the
same area, or the address could be outside of the addressable PA space,
but validating that goes beyond the scope of these helpers. Also note
that since the physical address space is never 64-bits wide, a
descriptor that includes the last page of memory is not valid. This is
fortunate, since it means that a valid physical address will never be an
error pointer and that the length of a memory descriptor in bytes will
fit in a 64-bit unsigned integer.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
reclaim_period_ms used to be positive only but the commit 0001725d0f
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.
Change validation to allow only positive input.
Fixes: 0001725d0f ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reported-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230111183408.104491-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When serializing and deserializing kvm_sregs, attributes of the segment
descriptors are stored by user space. For unusable segments,
vmx_segment_access_rights skips all attributes and sets them to 0.
This means we zero out the DPL (Descriptor Privilege Level) for unusable
entries.
Unusable segments are - contrary to their name - usable in 64bit mode and
are used by guests to for example create a linear map through the
NULL selector.
VMENTER checks if SS.DPL is correct depending on the CS segment type.
For types 9 (Execute Only) and 11 (Execute Read), CS.DPL must be equal to
SS.DPL [1].
We have seen real world guests setting CS to a usable segment with DPL=3
and SS to an unusable segment with DPL=3. Once we go through an sregs
get/set cycle, SS.DPL turns to 0. This causes the virtual machine to crash
reproducibly.
This commit changes the attribute logic to always preserve attributes for
unusable segments. According to [2] SS.DPL is always saved on VM exits,
regardless of the unusable bit so user space applications should have saved
the information on serialization correctly.
[3] specifies that besides SS.DPL the rest of the attributes of the
descriptors are undefined after VM entry if unusable bit is set. So, there
should be no harm in setting them all to the previous state.
[1] Intel SDM Vol 3C 26.3.1.2 Checks on Guest Segment Registers
[2] Intel SDM Vol 3C 27.3.2 Saving Segment Registers and Descriptor-Table
Registers
[3] Intel SDM Vol 3C 26.3.2.2 Loading Guest Segment Registers and
Descriptor-Table Registers
Cc: Alexander Graf <graf@amazon.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221114164823.69555-1-hborghor@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Placing a declaration of evt_reset is pedantically invalid
according to the C standard. While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:
x86_64/xen_shinfo_test.c:965:2: error: expected expression
struct kvm_xen_hvm_attr evt_reset = {
^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
^
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: a79b53aaaa ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tm6000 driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vpfe_capture drivers do not use the vb2 framework for streaming
video, instead they use the old vb1 framework and nobody stepped in to
convert these drivers to vb2.
The hardware is very old, so the decision was made to remove them
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The zr364xx driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The stkwebcam driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The fsl-viu driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The cpia2 driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The meye driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document how streams interacts with formats and selections.
Update documentation in respect to what is allowed, in particular streams
are only supported via full routes, source-only routes are not supported
right now.
The centerpiece of the API additions are streams. Albeit routes are
configured via S_ROUTING IOCTL that also declares streams, it is streams
that are accessed through other APIs. Thus refer to streams instead of
routes in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The stream field identifies the stream this frame descriptor applies to in
routing configuration across a multiplexed link.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The SK architecture comprises of baseboard and a SOM board. The
AM68 Starter Kit's baseboard contains most of the actual connectors,
power supply etc. The System on Module (SoM) is plugged on to the base
board. Therefore, add support for peripherals brought out in the base
board.
Schematics: https://www.ti.com/lit/zip/SPRR463
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230116071446.28867-4-sinthu.raja@ti.com
The v4l2_subdev_s_stream_helper() helper can be used by subdevs that
implement the stream-aware .enable_streams() and .disable_streams()
operations to implement .s_stream(). This is limited to subdevs that
have a single source pad.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
AM68 Starter Kit (SK) is a low cost, small form factor board designed
for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high
performance vision accelerators, hardware accelerators, latest C71x
DSP, high bandwidth real-time IPs for capture and display. The SoC is
power optimized to provide best in class performance for industrial
applications.
AM68 SK supports the following interfaces:
* 16 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.1 Type-C port
* x2 USB 3.1 Type-A ports
* x1 PCIe M.2 M Key
* 512 Mbit OSPI flash
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi GPIO header
SK's System on Module (SoM) contains the SoC and DDR.
Therefore, add DT node for the SOC and DDR on the SoM.
Schematics: https://www.ti.com/lit/zip/SPRR463
TRM: http://www.ti.com/lit/pdf/spruj28
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230116071446.28867-3-sinthu.raja@ti.com
Add two new subdev pad operations, .enable_streams() and
.disable_streams(), to allow control of individual streams per pad. This
is a superset of what the video .s_stream() operation implements.
To help with handling of backward compatibility, add two wrapper
functions around those operations, and require their usage in drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
AM68 Starter Kit is a low cost, small form factor board designed for
TI's AM68 SoC which is optimized to provide best in class performance
for industrial applications and add binding for the same.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230116071446.28867-2-sinthu.raja@ti.com
Commit b2b0a5e978 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former. Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.
Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.
With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.
Work around that by going back to how things used to work before commit
b2b0a5e978 for now; figuring out a superior solution will take time we
don't have available right now. However ...
Since the removal of generic_writepages() is imminent, open-code it
here. We're already inside a blk_start_plug() ... blk_finish_plug()
section here, so skip that part of the original generic_writepages().
This reverts commit b2b0a5e978.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Jani Nikula