The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b756 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
(cherry picked from commit 0159e31177)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 79a6734cd5 ("drm/i915/ddi: disable trancoder port select for 128b/132b SST")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ed653c7b8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8b4bbaf8dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Any active plane needs to have its crtc included in the atomic
state. For planes enabled via uapi that is all handler in the core.
But when we use a plane for joiner the uapi code things the plane
is disabled and therefore doesn't have a crtc. So we need to pull
those in by hand. We do it first thing in
intel_joiner_add_affected_crtcs() so that any newly added crtc will
subsequently pull in all of its joined crtcs as well.
The symptoms from failing to do this are:
- duct tape in the form of commit 1d5b09f8da ("drm/i915: Fix NULL
ptr deref by checking new_crtc_state")
- the plane's hw state will get overwritten by the disabled
uapi state if it can't find the uapi counterpart plane in
the atomic state from where it should copy the correct state
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-2-ville.syrjala@linux.intel.com
(cherry picked from commit 91077d1deb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the port width programming in the DDI_BUF_CTL register on MTLP+,
where this had an off-by-one error.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa4 ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.deak@intel.com
(cherry picked from commit b2ecdabe46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The format of the port width field in the DDI_BUF_CTL and the
TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the
x3 lane mode for HDMI FRL has a different encoding in the two registers.
To account for this use the TRANS_DDI_FUNC_CTL's own port width macro.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa4 ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-2-imre.deak@intel.com
(cherry picked from commit 76120b3a30)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d42)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6f71507415)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, intel_dp_dsc_max_src_input_bpc can return 0 for platforms not
supporting DSC, which could theoretically cause issues in clamp()
due to a low limit being greater than the high limit.
Instead, return the minimum bpc supported by the source to prevent
such issues.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtNfM399_=_ff81zeRJv=0+z7oFJfPGmJgTp6yrJmU+1w@mail.gmail.com/
Fixes: 160672b86b ("drm/i915/dp: Use clamp for pipe_bpp limits with DSC")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131041342.3086716-1-ankit.k.nautiyal@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a67221b5eb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we support Adaptive sync operation mode with dynamic frame
rate, but instead the operation mode with fixed rate is set.
This was initially set correctly in the earlier version of changes but
later got changed, while defining a macro for the same.
Fixes: a5bd5991cb ("drm/i915/display: Compute AS SDP parameters")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-4-mitulkumar.ajitkumar.golani@intel.com
(cherry picked from commit c580686254)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 35e1aacfe5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use intel_encoder_is_hdmi function which was recently introduced to
see if encoder is HDMI or not.
--v2
-Add Fixes tag [Jani]
Fixes: 6a3691ca47 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117041247.1084381-1-suraj.kandpal@intel.com
(cherry picked from commit 2499212e21)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When topology changes, before beginning a new HDCP authentication by
sending AKE_init message we need to first authenticate only the
repeater. Only after repeater authentication failure, it makes sense
to start a new HDCP authentication. Even though it made sense to not
enable HDCP directly from check_link and schedule it for later, repeater
authentication needs to be done immediately.
--v2
-Fix comment grammatical errors [Ankit]
Fixes: 47ef55a8b7 ("drm/i915/hdcp: Don't enable HDCP2.2 directly from check_link")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217083723.2883317-1-suraj.kandpal@intel.com
(cherry picked from commit 605a33e765)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling
-----BEGIN PGP SIGNATURE-----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=5FIc
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: 17f97a69c1
Link: 888f63cf1b
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit ed3a892e5e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> (For tty)
Reviewed-by: Lyude Paul <lyude@redhat.com> (For nouveau)
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmd9flgACgkQ+mJfZA7r
E8qSKAf9FoiRZD5dJVQ60wNEszj3Ub647+32sl2jA7jb5twoUve3ZreJvTCKUMfd
jtd+FIJtB9JLX9LwK9v8TBkkq20kAKFKvXNwLPLBsMIuQJ+1C3tkvQ6PugY/zzg0
6UGcgehlhf20lTtzqclYipophRCTl26nu7y2PkanPxRzfO62p7ygfcM38ZgqkrfK
b+GFXTB951k4aVsfNFmqbZrdpaY2E7Ybhx208cU6SfMhYvZYE6SpRc3f8zuj/w3P
ub3NFepdwg+Q2bVZuSwxX0OuWmoq06cAaAbODKzwNgjFaLxq3jXOVnZZnm7G8TVn
W85BC8RTlIStcd09Jp+tassKU+cMNA==
=r7tD
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-01-07' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
This reverts commit 483f7d94a0.
This needs to be reverted since HDCP even after updating the connector
state HDCP property we don't reenable HDCP until the next commit
in which the CP Property is set causing compliance to fail.
--v2
-Fix build issue [Dnyaneshwar]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
(cherry picked from commit fcf73e20cd)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Only intel_pmdemand.c should look inside the struct
intel_pmdemand_state. Indeed, this is already the case. Finish the job
and make struct intel_pmdemand_state opaque, preventing any direct pokes
at the guts of it in the future.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc5f418785ecd51454761e9a55f21340470a92e3.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable basic 128b/132b SST functionality without compression. Reuse
intel_dp_mtp_tu_compute_config() to figure out the TU after we've
determined we need to use an UHBR rate.
It's slightly complicated as the M/N computation is done in different
places in MST and SST paths, so we need to avoid trashing the values
later for UHBR.
If uncompressed UHBR fails, we drop to compressed non-UHBR, which is
quite likely to fail as well. We still lack 128b/132b SST+DSC.
We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder
directly. Enhanced framing is "don't care" for 128b/132b link.
v2: mst_master_transcoder, enhanced framing (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084e4e05bf25a5dd396dd391014943d42b11c88d.1735912293.git.jani.nikula@intel.com
We'll want to distinguish 128b/132b SST and MST modes at state
readout. There's a catch, though. From the hardware perspective,
128b/132b SST and MST programming are pretty much the same. And we can't
really ask the sink at this point.
If we have more than one transcoder in 128b/132b mode associated with
the port, we can safely assume it's MST. But for MST with only a single
stream enabled, we are pretty much out of luck. Let's fall back to
looking at the software state, i.e. intel_dp->is_mst. It should be fine
for the state checker, but for hardware takeover at probe, we'll have to
trust the GOP has only enabled SST.
TODO: Not sure how this *or* our current code handles 128b/132b enabled
by GOP.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/119a773a0d4d74ad204435e462f8d12cb0ea4128.1735912293.git.jani.nikula@intel.com
Write the payload allocation table for 128b/132b SST. Use VCPID 1 and
start from slot 0, with dp_m_n.tu slots.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet. Indeed, we don't yet compute TU for 128b/132b SST.
v2: Handle drm_dp_dpcd_write_payload() failures (Imre)
v3: Include drm_dp_helper.h (kernel test robot)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107095414.1244286-1-jani.nikula@intel.com
The callers of mst_stream_find_vcpi_slots_for_bpp() don't need the
returned slots for anything. On the contrary, they need to jump through
hoops to just distinguish between success and failure. Just return 0
instead of slots from mst_stream_find_vcpi_slots_for_bpp() for success,
and simplify the callers.
There's a pointless ret local variable that we can drop in the process.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b3671a548c893b1bb62151d41f90bb8ce842ccc.1735912293.git.jani.nikula@intel.com
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmdZ92YACgkQ+mJfZA7r
E8pSlQf+O3NYEw4F0Y8FSTY0rlG0WO+0p5fjrVipfkj3DOe+Z8uYyghrYwGqyIX9
GRcd4GLYiGNxToSfLY5B0+fQtF16S0L2dtAJ1sOFhG1HdVmV+1pzQs63ZRAyr4xc
NrPMLKOef1GvtOUaSxqDUmvrK8yiJevmYosjopFgzQjkiFOkK0WAErZVwBZypLKz
UYL1JOeStp9jG1ZEPNAfavIn/Ldquem1vjPZvLGwAfP/Sf/VxJDtabXHeXog+zf/
9pfrYvLLHStAMUJUIenfJr86W22Y4b7mvQFVuz25a/fIacd+9NaRKUqkltHE0/2o
aXPNMI31BiN++yJwoeQIY4HlMZMBgw==
=rw4n
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-12-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Increase the PKG_C_LATENCY Pkg C Latency field by the added wake time.
v1: Initial version.
v2: Rebase and cosmetic changes.
v3:
- Place latency adjustment early to accommodate round-up. [Suraj]
- Modify commit description and cosmetic change. [Suraj]
WA: 22020432604
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106094408.1011063-1-animesh.manna@intel.com
Currently, when bandwidth is insufficient for a given mode, we attempt
to use DSC. This is indicated by a debug print, followed by a check for
DSC support.
The debug message states that we are trying DSC, but DSC might not be
supported, which can give an incorrect picture in the logs if we bail
out later.
Correct the order for both DP and DP MST to:
- Check if DSC is required and supported, and return early if DSC is
not supported.
- Print a debug message to indicate that DSC will be tried next.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103031424.1732774-1-ankit.k.nautiyal@intel.com
This reverts commit 483f7d94a0.
This needs to be reverted since HDCP even after updating the connector
state HDCP property we don't reenable HDCP until the next commit
in which the CP Property is set causing compliance to fail.
--v2
-Fix build issue [Dnyaneshwar]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
Imre Deak