If the host system's udev fails to set a new name for the
network port, there is no NETDEV_CHANGENAME event to trigger
the driver to send the name down to the firmware. It is safe
to set the lif name multiple times, so we add a call early on
to set the default netdev name to be sure the FW has something
to use in its internal debug logging. Then when udev gets
around to changing it we can update it to the actual name the
system will be using.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change from using hardcoded MTU limits and instead use the
firmware defined limits. The value from the LIF attributes is
the frame size, so we take off the header size to convert to
MTU size.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently drive supports taprio offload which is a tc feature offloaded
to cpsw hardware. So driver has to set the hw feature flag, NETIF_F_HW_TC
in the net device to be compliant. This patch adds the flag.
Fixes: 8127224c27 ("ethernet: ti: am65-cpsw-qos: add TAPRIO offload support")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When regmap_update_bits failed in ave_init(), calls of the functions
reset_control_assert() and clk_disable_unprepare() were missed.
Add goto out_reset_assert to do this.
Fixes: 57878f2f46 ("net: ethernet: ave: add support for phy-mode setting of system controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit fe80536acf ("bareudp: Added attribute to enable & disable
rx metadata collection") breaks the the original(5.7) default behavior of
bareudp module to collect RX metadadata at the receive. It was added to
avoid the crash at the kernel neighbour subsytem when packet with metadata
from bareudp is processed. But it is no more needed as the
commit 394de110a7 ("net: Added pointer check for
dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash.
Fixes: fe80536acf ("bareudp: Added attribute to enable & disable rx metadata collection")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.
With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.
This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), pci_enable_wake()
and pci_set_power_state() to do required operations. In generic mode, they
are no longer needed.
Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use dev_get_drvdata() to get drv data.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720155714.714114-1-vaibhavgupta40@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the PPC4xx SPI driver to use GPIO descriptors.
The driver is already just picking some GPIOs from the device
tree so the conversion is pretty straight forward. However
this driver is looking form a pure "gpios" property rather
than the standard binding "cs-gpios" so we need to add a new
exception to the gpiolib OF parser to allow this for this
driver's compatibles.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20200714072226.26071-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi cadence driver should support spi-cs-high in mode bits
so that the peripherals that needs the chip select to be high active can
use it. Add the SPI-CS-HIGH flag in the supported mode bits.
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Link: https://lore.kernel.org/r/20200710211655.1564-1-shreyas.joshi@biamp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call the put function after probe successfully. Otherwise, the lpspi
module will keep active status until the first spi transfer called.
Disable runtime pm when probe fails. There is no need to active runtime
pm after probe failed.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20200714075251.12777-2-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v3:
* Rebase (Manasi)
v2:
* Rebase (Manasi)
As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.
Hence this logic should move to core DRM.
This reverts commit 727962f030.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: AMD gfx <amd-gfx@lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PowerPC always re-builds DTB even if nothing has been changed.
As for other architectures, arch/*/boot/dts/Makefile builds DTB by
using the dtb-y syntax.
In contrast, arch/powerpc/boot/dts/(fsl/)Makefile does nothing unless
CONFIG_OF_ALL_DTBS is defined. Instead, arch/powerpc/boot/Makefile
builds DTB on demand. You need to add DTB to 'targets' explicitly
so .*.cmd files are included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Adding a new 'stripe_size' sysfs entry to set and show stripe_size.
stripe_size should not be bigger than PAGE_SIZE, and it requires to
be multiple of 4096. We can adjust stripe_size by writing value into
sysfs entry, likely, set stripe_size as 16KB:
echo 16384 > /sys/block/md1/md/stripe_size
Show current stripe_size value:
cat /sys/block/md1/md/stripe_size
For PAGE_SIZE is equal to 4096, 'stripe_size' can just be read.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In RAID5, if issued bio size is bigger than stripe_size, it will be
split in the unit of stripe_size and process them one by one. Even
for size less then stripe_size, RAID5 also request data from disk at
least of stripe_size.
Nowdays, stripe_size is equal to the value of PAGE_SIZE. Since filesystem
usually issue bio in the unit of 4KB, there is no problem for PAGE_SIZE
as 4KB. But, for 64KB PAGE_SIZE, bio from filesystem requests 4KB data
while RAID5 issue IO at least stripe_size (64KB) each time. That will
waste resource of disk bandwidth and compute xor.
To avoding the waste, we want to make stripe_size configurable. This
patch just set default stripe_size as 4096. User can also set the value
bigger than 4KB for some special requirements, such as we know the
issued io size is more than 4KB.
To evaluate the new feature, we create raid5 device '/dev/md5' with
4 SSD disk and test it on arm64 machine with 64KB PAGE_SIZE.
1) We format /dev/md5 with mkfs.ext4 and mount ext4 with default
configure on /mnt directory. Then, trying to test it by dbench with
command: dbench -D /mnt -t 1000 10. Result show as:
'stripe_size = 64KB'
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 9805011 0.021 64.728
Close 7202525 0.001 0.120
Rename 415213 0.051 44.681
Unlink 1980066 0.079 93.147
Deltree 240 1.793 6.516
Mkdir 120 0.004 0.007
Qpathinfo 8887512 0.007 37.114
Qfileinfo 1557262 0.001 0.030
Qfsinfo 1629582 0.012 0.152
Sfileinfo 798756 0.040 57.641
Find 3436004 0.019 57.782
WriteX 4887239 0.021 57.638
ReadX 15370483 0.005 37.818
LockX 31934 0.003 0.022
UnlockX 31933 0.001 0.021
Flush 687205 13.302 530.088
Throughput 307.799 MB/sec 10 clients 10 procs max_latency=530.091 ms
-------------------------------------------------------
'stripe_size = 4KB'
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 11999166 0.021 36.380
Close 8814128 0.001 0.122
Rename 508113 0.051 29.169
Unlink 2423242 0.070 38.141
Deltree 300 1.885 7.155
Mkdir 150 0.004 0.006
Qpathinfo 10875921 0.007 35.485
Qfileinfo 1905837 0.001 0.032
Qfsinfo 1994304 0.012 0.125
Sfileinfo 977450 0.029 26.489
Find 4204952 0.019 9.361
WriteX 5981890 0.019 27.804
ReadX 18809742 0.004 33.491
LockX 39074 0.003 0.025
UnlockX 39074 0.001 0.014
Flush 841022 10.712 458.848
Throughput 376.777 MB/sec 10 clients 10 procs max_latency=458.852 ms
-------------------------------------------------------
It show that setting stripe_size as 4KB has higher thoughput, i.e.
(376.777 vs 307.799) and has smaller latency than that setting as 64KB.
2) We try to evaluate IO throughput for /dev/md5 by fio with config:
[4KB randwrite]
direct=1
numjob=2
iodepth=64
ioengine=libaio
filename=/dev/md5
bs=4KB
rw=randwrite
[64KB write]
direct=1
numjob=2
iodepth=64
ioengine=libaio
filename=/dev/md5
bs=1MB
rw=write
The result as follow:
+ +
| stripe_size(64KB) | stripe_size(4KB)
+----------------------------------------------------+
4KB randwrite | 15MB/s | 100MB/s
+----------------------------------------------------+
1MB write | 1000MB/s | 700MB/s
The result show that when size of io is bigger than 4KB (64KB),
64KB stripe_size has much higher IOPS. But for 4KB randwrite, that
means, size of io issued to device are smaller, 4KB stripe_size
have better performance.
Normally, default value (4096) can get relatively good performance.
But if each issued io is bigger than 4096, setting value more than
4096 may get better performance.
Here, we just set default stripe_size as 4096, and we will try to
support setting different stripe_size by sysfs interface in the
following patch.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Convert macro STRIPE_SIZE, STRIPE_SECTORS and STRIPE_SHIFT to
RAID5_STRIPE_SIZE(), RAID5_STRIPE_SECTORS() and RAID5_STRIPE_SHIFT().
This patch is prepare for the following adjustable stripe_size.
It will not change any existing functionality.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Ioana Ciornei says:
====================
dpaa2-eth: add support for TBF offload
This patch set adds support for TBF offload in dpaa2-eth.
The first patch restructures how the .ndo_setup_tc() callback is
implemented (each Qdisc is treated in a separate function), the second
patch just adds the necessary APIs for configuring the Tx shaper and the
last one is handling TC_SETUP_QDISC_TBF and configures as requested the
shaper.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
React to TC_SETUP_QDISC_TBF and configure the egress shaper as
appropriate with the maximum rate and burst size requested by the user.
TBF can only be offloaded on DPAA2 when it's the root qdisc, ie it's a
per port shaper.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the necessary API (dpni_set_tx_shaping) for configuring the rate and
burst size of a per port shaper in DPAA2.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the setup done for MQPRIO into a separate function so that
with the addition of another offload we do not crowd
dpaa2_eth_setup_tc(). After this restructuring it's easier to see what
is supported in terms of Qdisc offloading.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sync_thread_backup only checks sk_receive_queue is empty or not,
there is a situation which cannot sync the connection entries when
sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf,
the sync packets are dropped in __udp_enqueue_schedule_skb, this is
because the packets in reader_queue is not read, so the rmem is
not reclaimed.
Here I add the check of whether the reader_queue of the udp sock is
empty or not to solve this problem.
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Reported-by: zhouxudong <zhouxudong8@huawei.com>
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When expire_nodest_conn=1 and a destination is deleted, IPVS does not
expire the existing connections until the next matching incoming packet.
If there are many connection entries from a single client to a single
destination, many packets may get dropped before all the connections are
expired (more likely with lots of UDP traffic). An optimization can be
made where upon deletion of a destination, IPVS queues up delayed work
to immediately expire any connections with a deleted destination. This
ensures any reused source ports from a client (within the IPVS timeouts)
are scheduled to new real servers instead of silently dropped.
Signed-off-by: Andrew Sy Kim <kim.andrewsy@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Parav Pandit says:
====================
devlink small improvements
This short series improves the devlink code for lock commment,
simplifying checks and keeping the scope of mutex lock for necessary
fields.
Patch summary:
Patch-1 Keep the devlink_mutex for only for necessary changes.
Patch-2 Avoids duplicate check for reload flag
Patch-3 Adds missing comment for the scope of devlink instance lock
Patch-4 Constify devlink instance pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Constify devlink instance pointer while checking if reload operation is
supported or not.
This helps to review the scope of checks done in reload.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add comment to describe the purpose of devlink instance lock.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reload operation is enabled or not is already checked by
devlink_reload(). Hence, remove the duplicate check from
devlink_nl_cmd_reload().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to hold a device global lock when initializing
devlink device fields of a devlink instance which is not yet part of the
devices list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For most chip versions this has been added already. Allow also for
RTL8125A to enable ASPM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string,
there's no net namespace associated with current PID: fix the net ns entrance
logic.
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin says:
====================
qed: suppress irrelevant error messages on HW init
This raises the verbosity level of several error/warning messages on
driver/module initialization, most of which are false-positives, and
the one actively spamming the log for no reason.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It was found that qed_pglueb_rbc_attn_handler() can produce a lot of
false-positive error detections on driver load/reload (especially after
crashes/recoveries) and spam the kernel log:
[ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0
[ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[...]
Reduce the logging level of two false-positive prone error messages from
notice to verbose on initialization (only) to not mix it with real error
attentions while debugging.
Fixes: 666db4862f ("qed: Revise load sequence to avoid PCI errors")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the verbosity of the "don't support RoCE & iWARP simultaneously"
warning to debug level to stop flooding on driver/hardware initialization:
[ 4.783230] qede 01:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth0]
[ 4.810020] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 4.861186] qede 01:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth1]
[ 4.893311] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.181713] qede a1:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth2]
[ 5.224740] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.276449] qede a1:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth3]
[ 5.318671] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.369548] qede a1:00.02: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth4]
[ 5.411645] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
Fixes: e0a8f9de16 ("qed: Add iWARP enablement support")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE(). However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself. This may not be the case if allocating the object also
involves initializing a static or global variable, for example.
fsverity_info::tree_params.hash_alg->tfm is a crypto_ahash object that's
internal to and is allocated by the crypto subsystem. So by using
READ_ONCE() for ->i_verity_info, we're relying on internal
implementation details of the crypto subsystem.
Remove this fragile assumption by using smp_load_acquire() instead.
Also fix the cmpxchg logic to correctly execute an ACQUIRE barrier when
losing the cmpxchg race, since cmpxchg doesn't guarantee a memory
barrier on failure.
(Note: I haven't seen any real-world problems here. This change is just
fixing the code to be guaranteed correct and less fragile.)
Fixes: fd2d1acfca ("fs-verity: add the hook for file ->open()")
Link: https://lore.kernel.org/r/20200721225920.114347-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE(). However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself. This may not be the case if allocating the object also
involves initializing a static or global variable, for example.
fscrypt_info includes various sub-objects which are internal to and are
allocated by other kernel subsystems such as keyrings and crypto. So by
using READ_ONCE() for ->i_crypt_info, we're relying on internal
implementation details of these other kernel subsystems.
Remove this fragile assumption by using smp_load_acquire() instead.
(Note: I haven't seen any real-world problems here. This change is just
fixing the code to be guaranteed correct and less fragile.)
Fixes: e37a784d8b ("fscrypt: use READ_ONCE() to access ->i_crypt_info")
Link: https://lore.kernel.org/r/20200721225920.114347-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE(). However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself. This may not be the case if allocating the object also
involves initializing a static or global variable, for example.
super_block::s_master_keys is a keyring, which is internal to and is
allocated by the keyrings subsystem. By using READ_ONCE() for it, we're
relying on internal implementation details of the keyrings subsystem.
Remove this fragile assumption by using smp_load_acquire() instead.
(Note: I haven't seen any real-world problems here. This change is just
fixing the code to be guaranteed correct and less fragile.)
Fixes: 22d94f493b ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
Link: https://lore.kernel.org/r/20200721225920.114347-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Shannon Nelson