For a long time the DMA API has been implemented inline in dma-mapping.h,
but the function bodies can be quite large. Move them all out of line.
This also removes all the dma_direct_* exports as those are just
implementation details and should never be used by drivers directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Pull an operating performance points (OPP) framework fix for 5.8-rc6 from
Viresh Kumar:
"This fixes freeing of the OPP entries for the legacy OPP table type (v1)."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Increase parsed_static_opps in _of_add_opp_table_v1()
Commit 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked") reverted multipath head disk revalidation due to deadlocks
caused by holding the bd_mutex during revalidate.
Updating the multipath disk blockdev size is still required though for
userspace to be able to observe any resizing while the device is
mounted. Directly update the bdev inode size to avoid unnecessarily
holding the bdev->bd_mutex.
Fixes: 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
'struct amd_gpio_acpi_match' becomes defined but unused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-amd.c:959:36: warning: ‘amd_gpio_acpi_match’ defined but not used [-Wunused-const-variable=]
959 | static const struct acpi_device_id amd_gpio_acpi_match[] = {
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ken Xue <Ken.Xue@amd.com>
Cc: "Wu, Jeff" <Jeff.Wu@amd.com>
Cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Cc: Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-26-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Correct misspellings and provide missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'start_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'val' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_npins' not described in 'armada_37xx_pin_group'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-25-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It has never been used.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/meson/pinctrl-meson-a1.c:749:27: warning: ‘i2c_slave_groups’ defined but not used [-Wunused-const-variable=]
749 | static const char const i2c_slave_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Qianggui Song <qianggui.song@amlogic.com>
Cc: linux-amlogic@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-24-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add some missing attributes/parameter descriptions, remove other
superfluous ones, add struct header titles and fix misspellings.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin'
drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry'
drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: linux-omap@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Depending on how you look at it, you can either say that:
a) There is a PDC hardware issue (with the specific IP rev that exists
on sc7180) that causes the PDC not to work properly when configured
to handle dual edges.
b) The dual edge feature of the PDC hardware was only added in later
HW revisions and thus isn't in all hardware.
Regardless of how you look at it, let's work around the lack of dual
edge support by only ever letting our parent see requests for single
edge interrupts on affected hardware.
NOTE: it's possible that a driver requesting a dual edge interrupt
might get several edges coalesced into a single IRQ. For instance if
a line starts low and then goes high and low again, the driver that
requested the IRQ is not guaranteed to be called twice. However, it
is guaranteed that once the driver's interrupt handler starts running
its first instruction that any new edges coming in will cause the
interrupt to fire again. This is relatively commonplace for dual-edge
gpio interrupts (many gpio controllers require software to emulate
dual edge with single edge) so client drivers should be setup to
handle it.
Fixes: e35a6ae0eb ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200714080254.v3.1.Ie0d730120b232a86a4eac1e2909bcbec844d1766@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the loop over the possible arrays into the caller to remove a level
of indentation for the whole function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
mdp_major can just move to drivers/md/md.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
devfs is long gone, and autoscan works just fine without this these days.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using a spcial RAID_AUTORUN ioctl that only exists for
non-modular builds and is only called from the early init code, just
call the actual function directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Just like the NFS and CIFS root code this better lives with the
driver it is tightly integrated with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
The only caller of the bstat function becomes cleaner and simpler when
open coding the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper for struct file based chmode operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper for struct file based chown operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Demote headers which are clearly not kerneldoc, provide titles for
struct definition blocks, fix API slip (bitrot) misspellings and
provide some missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux '
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data'
drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group'
drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-rockchip@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pctrldev' not described in 'bm1880_pinctrl'
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pinconf' not described in 'bm1880_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-19-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The documentation header for 'struct at91_pinctrl_mux_ops' was missing
entries for {g,s}et_drivestrength and {g,s}et_slewrate.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:77: warning: cannot understand function prototype: 'enum drive_strength_bit '
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_slewrate' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_slewrate' not described in 'at91_pinctrl_mux_ops'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-18-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_wakeup_sources' not described in 'atmel_pioctrl'
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_suspend_backup' not described in 'atmel_pioctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-16-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix a spelling/typo while we're here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinconf-generic.c:242: warning: Function parameter or member 'pctldev' not described in 'pinconf_generic_parse_dt_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-15-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'map' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'num_maps' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:409: warning: Function parameter or member 'out_args' not described in 'pinctrl_parse_index_with_args'
drivers/pinctrl/devicetree.c:409: warning: Excess function parameter 'out_arts' description in 'pinctrl_parse_index_with_args'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-14-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
And rename another which has probably bitrotted.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinmux.c:83: warning: Function parameter or member 'pctldev' not described in 'pinmux_can_be_used_for_gpio'
drivers/pinctrl/pinmux.c:108: warning: Function parameter or member 'pctldev' not described in 'pin_request'
drivers/pinctrl/pinmux.c:261: warning: Function parameter or member 'gpio' not described in 'pinmux_request_gpio'
drivers/pinctrl/pinmux.c:751: warning: Function parameter or member 'selector' not described in 'pinmux_generic_get_function'
drivers/pinctrl/pinmux.c:751: warning: Excess function parameter 'group_selector' description in 'pinmux_generic_get_function'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-13-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most are likely due to bitrot/API slip. Some are formatting issues.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/core.c:167: warning: Function parameter or member 'pin' not described in 'pin_get_name'
drivers/pinctrl/core.c:167: warning: Excess function parameter 'name' description in 'pin_get_name'
drivers/pinctrl/core.c:584: warning: Function parameter or member 'selector' not described in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:584: warning: Excess function parameter 'gselector' description in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:1356: error: Cannot parse struct or union!
drivers/pinctrl/core.c:1458: warning: Function parameter or member 'map' not described in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:1458: warning: Excess function parameter 'maps' description in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:2239: warning: Function parameter or member 'pctldev' not described in 'devm_pinctrl_register_and_init'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-12-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not all sourcefiles which end up including pinctrl-mtk-common-v2.h make use
of 'mtk_default_register_base_names' and there is nowhere we can place the
definition to void the need for __maybe_unused except its own headerfile,
which seems like overkill. So instead we tell the compiler that it's okay
for it to be unused by some of the consumers.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:19:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-moore.h:25,
from drivers/pinctrl/mediatek/pinctrl-moore.c:12:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-paris.c:15:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h:15,
from drivers/pinctrl/mediatek/pinctrl-mt6797.c:13:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt8183.c:9:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt6765.c:10:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-11-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm8976.c:802:27: warning: ‘nav_tsync_groups’ defined but not used [-Wunused-const-variable=]
802 | static const char
const nav_tsync_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Del Regno <kholk11@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-10-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kerneldoc struct titles must be followed by whitespace else the
checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c64xx.c:212: warning: cannot understand function prototype: 'struct s3c64xx_eint0_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-9-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kerneldoc struct titles must be followed by whitespace. Also attributes
need to be in the format '@.*: ' else the checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c24xx.c💯 warning: cannot understand function prototype: 'struct s3c24xx_eint_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-8-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-samsung.c:1149: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_suspend'
drivers/pinctrl/samsung/pinctrl-samsung.c:1199: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_resume'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-7-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add missing descriptions for attributes and fix 1 formatting issue.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'desc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'irq_chip' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'intr_target_use_scm' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'soc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'phys_base' not described in 'msm_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-6-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit'
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There has been little to no attempt to document any of the demoted
structures here. These are obviously not kerneldoc headers.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>From ill formatted kerneldoc, to incomplete *and* incorrect struct headers,
through to formatting issues and missing attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/sirf/pinctrl-atlas7.c:197: warning: Function parameter or member 'id' not described in 'atlas7_pad_config'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'func' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'pull' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'dstr' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'reserved' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:359: warning: Cannot understand * @dev: a pointer back to containing device
on line 359 - I thought it was a doc line
drivers/pinctrl/sirf/pinctrl-atlas7.c:4794: warning: Function parameter or member 'pad_type' not described in 'atlas7_pull_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:4917: warning: Function parameter or member 'reserved' not described in 'atlas7_ds_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'a7gc' not described in 'atlas7_gpio_to_bank'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'gpio' not described in 'atlas7_gpio_to_bank'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-3-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'clk' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq_chip' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'num_irq' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq' not described in 'owl_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: David Liu <liuwei@actions-semi.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-2-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Tegra194, data on valid operating points for the CPUs needs to be
queried from BPMP. However, there is no node representing CPU complex.
So, add a compatible string to the 'cpus' node instead of using dummy
node to bind the cpufreq driver to. Also, add reference to the BPMP
instance for the CPU complex.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order
to operate correctly. Make sure to specify them for the Norrin board.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The VI I2C controller provides an I2C bus and therefore needs to define
the #address-cells and #size-cells properties.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 VI I2C is in VE power domain and i2c-vi node should have
power-domains property.
Current Tegra210 i2c-vi device node is missing both VI I2C clocks
and power-domains property.
This patch adds them.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:
1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB
But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.
Fixes: b713128de7 ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds device tree bindings for the NXP PCA9570,
a 4-bit I2C GPO expander.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200630160934.1197066-1-mans0n@gorani.run
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Christoph Hellwig