kvm_x86_ops.vcpu_after_set_cpuid() is used to update vmx/svm specific
vcpu settings based on updated CPUID settings. So it's supposed to be
called after CPUIDs are updated, i.e., kvm_update_cpuid_runtime().
Currently, kvm_update_cpuid_runtime() only updates CPUID bits of OSXSAVE,
APIC, OSPKE, MWAIT, KVM_FEATURE_PV_UNHALT and CPUID(0xD,0).ebx and
CPUID(0xD, 1).ebx. None of them is consumed by vmx/svm's
update_vcpu_after_set_cpuid(). So there is no dependency between them.
Move kvm_x86_ops.vcpu_after_set_cpuid() into kvm_vcpu_after_set_cpuid() is
obviously more reasonable.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-6-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The name of callback cpuid_update() is misleading that it's not about
updating CPUID settings of vcpu but updating the configurations of vcpu
based on the CPUIDs. So rename it to vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-5-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now there is no updating CPUID bits behavior in kvm_update_cpuid(),
rename it to kvm_vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-4-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Distorted audio appears occasionally, affecting either playback or
capture and requiring the affected substream to be closed by all
applications and re-opened.
The best way I have found to reproduce the bug is to use dmix in
combination with Chromium, which opens the audio device multiple times
in threads. Anecdotally, the problems appear to have increased with
faster CPUs. I ruled out 32-bit counter wrapping; it often happens
much earlier.
Since applying this patch I have not had problems, where previously
they would occur several times a day.
The patch targets the following issues:
* Check for progress using the counter from the hardware, not after it
has been truncated to the buffer.
This is a clean way to address a possible bug where if a whole
ringbuffer advances between interrupts, it goes unnoticed.
* Move last_period state from chip to pipe
This more logically belongs as part of pipe, and code is reasier to
read if it is "counter position last time a period elapsed".
Now the code has no references to period count. A period is just
when the regular counter crosses a threshold. This increases
readability and reduces scope for bugs.
* Treat period notification and buffer advance independently:
This helps to clarify what is the responsibility of the interrupt
handler, and what is pcm_pointer().
Removing shared state between these operations means race conditions
are fixed without introducing locks. Synchronisation is only around
the read of pipe->dma_counter. There may be cache line contention
around "struct audiopipe" but I did not have cause to profile this.
Pay attention to be robust where dma_counter wrapping is not a
multiple of period_size or buffer_size.
This is a revised patch based on feedback from Takashi and Giuliano.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-5-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are valid conditions in normal circumstances, so do not "warn" but
make them for debugging.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-4-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use of atomics does not make these statements robust:
atomic_inc(&chip->opencount);
if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
chip->can_set_rate=0;
and
if (atomic_read(&chip->opencount)) {
if (chip->opencount) {
changed = -EAGAIN;
} else {
changed = set_digital_mode(chip, dmode);
It would be necessary to atomically increment or decrement the value
and use the returned result. And yet we still need to prevent other
threads making use of "can_set_rate" while we set it.
However in all but one case the atomic is misleading as they are already
running with "mode_mutex" held.
Decisions are made on mode setting are often intrinsically connected
to "opencount" because some operations are not permitted unless
there is sole ownership.
So instead simplify this, and use "mode_mutex" as a lock for all reference
counting and mode setting.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-2-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This check is always false, as it's not the responsibilty of the
device-specific code to make this check. It is already checked
in snd_echo_digital_mode_put.
I do not have a Mona interface to test this change.
This patch is in preparation for follow-up patch to modify the
behavior of "opencount".
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-1-mark@xwax.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar to ip_vti, IPIP and IPIP6 tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix the
build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to ip6_vti, IP6IP6 and IP6IP tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The child tunnel if_id will be used for xfrm interface's lookup
when processing the IP(6)IP(6) packets in the next patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For IP6IP tunnel processing, the functions called will be the
same as that for IP6IP6 tunnel's. So reuse it and register it
with family == AF_INET.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to IPIP tunnel's processing, this patch is to support
IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For IPIP6 tunnel processing, the functions called will be the
same as that for IPIP tunnel's. So reuse it and register it
with family == AF_INET6.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Beside called in kvm_vcpu_ioctl_set_cpuid*(), kvm_update_cpuid() is also
called 5 places else in x86.c and 1 place else in lapic.c. All those 6
places only need the part of updating guest CPUIDs (OSXSAVE, OSPKE, APIC,
KVM_FEATURE_PV_UNHALT, ...) based on the runtime vcpu state, so extract
them as a separate kvm_update_cpuid_runtime().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With tunnel4_input_afinfo added, IPIP tunnel processing in
ip_vti can be easily done with .cb_handler. So replace the
processing by calling ip_tunnel_rcv() with it.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to register a callback function tunnel6_rcv_cb with
is_ipip set in a xfrm_input_afinfo object for tunnel6 and tunnel46.
It will be called by xfrm_rcv_cb() from xfrm_input() when family
is AF_INET6 and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub
noticed.
- Handle the err returned by xfrm_input_register_afinfo() in
tunnel6_init/fini(), as Sabrina noticed.
v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET6_XFRM_TUNNEL)" to fix the build error
when xfrm is disabled, reported by kbuild test robot
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to register a callback function tunnel4_rcv_cb with
is_ipip set in a xfrm_input_afinfo object for tunnel4 and tunnel64.
It will be called by xfrm_rcv_cb() from xfrm_input() when family
is AF_INET and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub
noticed.
- Handle the err returned by xfrm_input_register_afinfo() in
tunnel4_init/fini(), as Sabrina noticed.
v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET_XFRM_TUNNEL)" to fix the build error
when xfrm is disabled, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to add a new member is_ipip to struct xfrm_input_afinfo,
to allow another group family of callback functions to be registered
with is_ipip set.
This will be used for doing a callback for struct xfrm(6)_tunnel of
ipip/ipv6 tunnels in xfrm_input() by calling xfrm_rcv_cb(), which is
needed by ipip/ipv6 tunnels' support in ip(6)_vti and xfrm interface
in the next patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use kvm_check_cpuid() to validate if userspace provides legal cpuid
settings and call it before KVM take any action to update CPUID or
update vcpu states based on given CPUID settings.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no dependencies between kvm_apic_set_version() and
kvm_update_cpuid() because kvm_apic_set_version() queries X2APIC CPUID bit,
which is not touched/changed by kvm_update_cpuid().
Obviously, kvm_apic_set_version() belongs to the category of updating
vcpu model.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-9-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a timer is enqueued with a negative delta (ie: expiry is below
base->clk), it gets added to the wheel as expiring now (base->clk).
Yet the value that gets stored in base->next_expiry, while calling
trigger_dyntick_cpu(), is the initial timer->expires value. The
resulting state becomes:
base->next_expiry < base->clk
On the next timer enqueue, forward_timer_base() may accidentally
rewind base->clk. As a possible outcome, timers may expire way too
early, the worst case being that the highest wheel levels get spuriously
processed again.
To prevent from that, make sure that base->next_expiry doesn't get below
base->clk.
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org
HHI_VIID_CLK_CNTL[19] is not part of the public S805 datasheet. However,
the GXBB driver defines this bit as a gate called "vclk2" and in the
3.10 kernel GPL code dump the following line can found:
WRITE_LCD_CBUS_REG_BITS(HHI_VIID_CLK_CNTL, 0, 19, 1); //disable vclk2_en
Add this gate clock to the Meson8/Meson8b/Meson8m2 clock controller to
complete the VCLK2 clock tree.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200629203904.2989007-3-martin.blumenstingl@googlemail.com
HHI_VID_CLK_CNTL[19] is documented as CLK_EN0. This description is the
same in the public S912 datasheet and the GXBB driver calls this gate
"vclk". Add this gate clock to the Meson8/Meson8b/Meson8m2 clock
controller because it's needed to make the video output work.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200629203904.2989007-2-martin.blumenstingl@googlemail.com
Use the qcom implementation for IOMMU hardware on sm8150 and sm8250 SoCs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200609194030.17756-3-jonathan@marek.ca
Signed-off-by: Will Deacon <will@kernel.org>
Add compatible strings for sm8150 and sm8250 iommus to documentation.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200609194030.17756-2-jonathan@marek.ca
Signed-off-by: Will Deacon <will@kernel.org>
If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For a Linux server with NUMA, there are possibly multiple (de)compressors
which are either local or remote to some NUMA node. Some drivers will
automatically use the (de)compressor near the CPU calling acomp_alloc().
However, it is not necessarily correct because users who send acomp_req
could be from different NUMA node with the CPU which allocates acomp.
Just like kernel has kmalloc() and kmalloc_node(), here crypto can have
same support.
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc
Craig Topper suggested me in ClangBuiltLinux issue #1050:
> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.
First, I removed the trailing comma in the PRECOMPUTE line.
Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc
With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.
I confirmed that this works with Linux-kernel v5.7.5 final.
NOTE: This patch is on top of Linux v5.7 final.
Thanks to Craig and especially Nick for double-checking and his comments.
Suggested-by: Craig Topper <craig.topper@intel.com>
Suggested-by: Craig Topper <craig.topper@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1050
Link: https://bugs.llvm.org/show_bug.cgi?id=24494
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a number of endianness marking issues in the ccp
driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some user-space programs rely on crypto requests that have no
control metadata. This broke when a check was added to require
the presence of control metadata with the ctx->init flag.
This patch fixes the regression by setting ctx->init as long as
one sendmsg(2) has been made, with or without a control message.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
features[] and id_table[] are not modified and can be made const to
allow the compiler to put them in read-only memory.
Before:
text data bss dec hex filename
11534 2056 160 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
After:
text data bss dec hex filename
11630 1992 128 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
id_table[] is not modified and an be made const to allow the compiler to
put it in read-only memory.
Before:
text data bss dec hex filename
1746 192 8 1946 79a drivers/char/hw_random/virtio-rng.o
After:
text data bss dec hex filename
1762 176 8 1946 79a drivers/char/hw_random/virtio-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
nmk_rng_ids[] is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
652 216 4 872 368 drivers/char/hw_random/nomadik-rng.o
After:
text data bss dec hex filename
676 192 4 872 368 drivers/char/hw_random/nomadik-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
bcm2835_rng_devtype[] is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
2392 176 0 2568 a08 drivers/char/hw_random/bcm2835-rng.o
After:
text data bss dec hex filename
2464 104 0 2568 a08 drivers/char/hw_random/bcm2835-rng.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As HW_RANDOM_BA431 does not have any platform dependency, it should not
default to enabled.
Fixes: 0289e9be5d ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ba431 driver depends on HAS_IOMEM and this was missing from
the Kconfig file.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0289e9be5d ("hwrng: ba431 - add support for BA431 hwrng")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Forward requests to another provider if the key length for AES-XTS is
192 bits as this is not supported by the QAT accelerators.
This fixes the following issue reported with the option
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:
alg: skcipher: qat_aes_xts setkey failed on test vector "random: len=3204 klen=48"; expected_error=0, actual_error=-22, flags=0x1
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove tfm field in qat_alg_skcipher_ctx structure.
This is not used.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Validate AES-XTS key using the function xts_verify_key() to prevent
malformed keys.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow AES-XTS requests that are not multiple of the block size.
If a request is smaller than the block size, return -EINVAL.
This fixes the following issue reported by the crypto testmgr self-test:
alg: skcipher: qat_aes_xts encryption failed on test vector "random: len=116 klen=64"; expected_error=0, actual_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<reimport>45.85%@+4077, <flush>54.15%@alignmask+18]"
Fixes: 96ee111a65 ("crypto: qat - return error for block...")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a bunch of sparse warnings by adding __force tags
when casting __iomem poitners to u64.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Xiaoyao Li