Mark "data" argument in rpmsg_send() const, and perculate to related
drivers. Replace deprecated class_destroy() with class_unregister().
-----BEGIN PGP SIGNATURE-----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=MGvD
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"Mark 'data' argument in rpmsg_send() const, and perculate to related
drivers. Replace deprecated class_destroy() with class_unregister()"
* tag 'rpmsg-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
media: platform: mtk-mdp3: Constify buffer passed to mdp_vpu_sendmsg()
ASoC: qcom: Constify GPR packet being send over GPR interface
rpmsg: Constify buffer passed to send API
remoteproc: mtk_scp: Constify buffer passed to scp_send_ipi()
remoteproc: mtk_scp_ipi: Constify buffer passed to scp_ipi_send()
drivers: rpmsg: class_destroy() is deprecated
The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change
to how individual Tegra SoCs get selected in Kconfig and
BPMP firmware driver updates including a refresh of the ABI
header to match the version used by firmware
- STM32 updates to the firewall bus driver and support for
the debug bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the
unused Baikal T1 driver
-----BEGIN PGP SIGNATURE-----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=UB4F
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
gpr_send_pkt() and pkt_router_send_svc_pkt() only send the GPR packet
they receive, without any need to actually modify it, so mark the
pointer to GPR packet as pointer to const for code safety and code
self-documentation. Several users of this interface can follow up and
also operate on pointer to const.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-rpmsg-send-const-v3-4-4d7fd27f037f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently the database stores macrotile_mode in the data. However it
can be derived from the rest of the data: it should be used for UBWC
encoding >= 3.0 except for several corner cases (SM8150 and SC8180X).
The ubwc_bank_spread field seems to be based on the impreside data we
had for the MDSS and DPU programming. In some cases UBWC engine inside
the display controller doesn't need to program it, although bank spread
is to be enabled.
Bank swizzle is also currently stored as is, but it is almost standard
(banks 1-3 for UBWC 1.0 and 2-3 for other versions), the only exception
being Lemans (it uses only bank 3).
Add helpers returning values from the config for now. They will be
rewritten later, in a separate series, but having the helper now
simplifies refacroring the code later.
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260125-iris-ubwc-v4-2-1ff30644ac81@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MDSS and GPU drivers use different approaches to get min_acc length.
Add helper function that can be used by all the drivers.
The helper reflects our current best guess, it blindly copies the
approach adopted by the MDSS drivers and it matches current values
selected by the GPU driver.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260125-iris-ubwc-v4-1-1ff30644ac81@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMI framework proposes a set of services which are defined by an
integer identifier. The different QMI client lookup for the services
via this identifier. Moreover, the function qmi_add_lookup() and
qmi_add_server() must match the service ID but the code in different
places set the same value but with a different macro name. These
macros are spreaded across the different subsystems implementing the
protocols associated with a service. It would make more sense to
define them in the QMI header for the sake of consistency and clarity.
This change use an unified naming for the services and enumerate the
ones implemented in the Linux kernel. More services can come later and
put the service ID in this same header.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-2-daniel.lezcano@oss.qualcomm.com
[bjorn: Lower case hex constants]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field.
Fixes: 1ebcde047c ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix incorrect slice activation/deactivation accounting by replacing the
bitmap-based activation tracking with per-slice atomic reference counters.
This resolves mismatches that occur when multiple client drivers vote for
the same slice or when llcc_slice_getd() is called multiple times.
As part of this fix, simplify slice descriptor handling by eliminating
dynamic allocation. llcc_slice_getd() now returns a pointer to a
preallocated descriptor, removing the need for repeated allocation/free
cycles and ensuring consistent reference tracking across all users.
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-external_llcc_changes1set-v1-1-6347e52e648e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual
-----BEGIN PGP SIGNATURE-----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=kfLN
-----END PGP SIGNATURE-----
Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
The header has a function which calls pr_err(). Don't require users of
the header to include <linux/printk.h> and include it here.
Fixes: 87cfc79dcd ("drm/msm/a6xx: Resolve the meaning of UBWC_MODE")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20260110-iris-ubwc-v1-1-dd70494dcd7b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the support for loading and managing the TrustZone-based remote
processors found in the Glymur platform through a topic branch, as it's
a mix of qcom-soc and remoteproc patches.
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPR bus driver calls each GPR client callback with pointer to the GPR
response packet. The callbacks are not suppose to modify that response
packet, so make it a pointer to const to document that expectation
explicitly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-3-d0833f3ed423@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is already a typedef for GPR callback used in 'struct
pkt_router_svc', so use it also in 'struct apr_driver', because it is
the same type - one is assigned to another in apr_device_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-2-d0833f3ed423@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
APR bus driver calls each APR client callback with pointer to the APR
response packet. The callbacks are not suppose to modify that response
packet, so make it a pointer to const to document that expectation
explicitly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-1-d0833f3ed423@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add system cache table(SCT) and configs for Glymur SoC
Updated the list of usecase id's to enable additional clients for Glymur
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-glymur_llcc_enablement-v3-2-43457b354b0d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some of the new field added to socinfo structure with version 21, 22
and 23 which is only used by boot firmware and it is of no use for
Linux.Add reserve field in socinfo so that the structure remain
updated and prepared if we get any new field in future which could
be used by Linux. While at it, also updates switch case for backward
compatibility if the SoC runs with boot firmware which has these
new version added.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for socinfo version 20. Version 20 adds a new field
package id and its zeroth bit contain information that can be
can be used to tune temperature thresholds on devices which might
be able to withstand higher temperatures. Zeroth bit value 1 means
that its heat dissipation is better and more relaxed thermal
scheme can be put in place and 0 means a more aggressive scheme
may be needed.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the ubwc configuration for Kaanapali chipset. This chipset brings
support for UBWC v6 version. The rest of the configurations remains
as usual.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-kaana-gpu-support-v1-1-73530b0700ed@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In Qualcomm SoCs, firmware loading for Serial Engines (SE) within the QUP
hardware has traditionally been managed by TrustZone (TZ). This restriction
poses a significant challenge for developers, as it limits their ability to
enable various protocols on any of the SEs from the Linux side, reducing
flexibility.
Load the firmware to QUP SE based on the 'firmware-name' property specified
in devicetree at bootup time.
Co-developed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911043256.3523057-4-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
pas id is not used in qcom_mdt_load_no_init() and it should not
be used as it is non-PAS specific function and has no relation
to PAS specific mechanism.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/ath12k/ahb.c
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807074311.2381713-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Make the values a bit more meaningful.
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660981/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This bit is set iff the UBWC version is 1.0. That notably does not
include QCM2290's "no UBWC".
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660971/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a file that will serve as a single source of truth for UBWC
configuration data for various multimedia blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660959/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The members of QMI header have to be swapped on big endian platforms. Use
__le16 types instead of u16 ones.
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Fixes: 9b8a11e826 ("soc: qcom: Introduce QMI encoder/decoder")
Fixes: 3830d0771e ("soc: qcom: Introduce QMI helpers")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250522143530.3623809-3-alexander.wilhelm@westermo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
-----BEGIN PGP SIGNATURE-----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=Wqwn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc05DAACgkQYKtH/8kJ
UidXZQ//b9NHOLIaYNBcxSFT5ibK1orcCpWcUQlzkwKRwz8kXMsXW41t3R/Ab1Wk
nJhQFwWL28sDtDTK13mdfSM4dnDuoqtjIk4/40LGyivla7m5LCPr775xFYJzfRPc
z0gZvabNp4syKC4l5FCFILOxeYE2cyDkzGMxlTg5ztUfF4AsFr3PrJq9wmvhfQo8
GRm6XSsAaq7cshEwYqJRtDfR3i6vzaqbbn54/HHBTpMZnhus2iZk92Q1gEekD2fi
UjySAmdOFCjCIPCxxrRMEPupHjT20DqJVK//m/kNCNAw4i4049o1Xu/KjoymPQNa
Wg/UjS5Lsne58dFI1Kmmdat9nqrVrd0ZXQd4mpERSJKYAGptO73PNofzFDvtuLYX
V3usgZIZJzk/L+amkVIeY/Ot8fPgiRgb2G5SIcWcIBqiUtwNyw3TOnxcswcml8JA
gzneVx4LryrRPrjJGTb1LqefwH4Rs48RpKUVDrHN7vxK3r3EKirqxQtTic7kdrJp
GbR0OdkfIcLF3k4uSMDSfKlIB7kcldGdJw8ZJY0Qn4yJr7Uss+N4jk6U8eqkW0AC
0LKGXk4ym9t8rFYnfck/toGDtXMFnjNFnY+SYq9F241Ux08l2stme14PG7Mu0tyY
dxEbV1FYkxy55LVYgW0hK/Y5+ogGusNfJICZSTen6NDGK38+x4I=
=yuqG
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
-----BEGIN PGP SIGNATURE-----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=H31v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2qZ7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Implement necessary support for the LLCC control on the SAR1130P and
SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
shift and also require manual override for num_banks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-3-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM related irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')
On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.
Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240903101510.3452734-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup of
the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART engine
that that chip seems to have. Hopefully it's in a better state now,
but hardware designers still seem to come up with more ways to make
broken UARTS 40+ years after this all should have finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUz1w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymAhwCcCw/6BX3aKGTyx7ZxeMRc/mjbSLIAoMUv6bGT
6H04ZvcSd63ZotAWeZsn
=PWB8
-----END PGP SIGNATURE-----
Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.
For UART devices the S_GP_LENGTH is the RX word count.
The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c54
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
The maximum amount of DDR memory used by the Mediatek MT8188/MT8195 SCP
is increased, to handle new use cases. Handling of optional L1TCM memory
is made actually optional.
An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
Support for attaching to an running remote processor is added to the
Xilinx R5F.
An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the dependency
on a userspace implementation to detect when the battery monitor and USB
Type-C port manager becomes available. This is then integrated with the
Qualcomm remoteproc driver.
The Qualcomm PAS remoteproc driver gains support for attempting to bust
hwspinlocks held by the remote processor when it crashed/stopped.
The TI OMAP remoteproc driver is transitioned to use devres helpers for
various forms of allocations.
Parsing of memory-regions in the i.MX remoteproc driver is improved to
avoid a NULL pointer dereference if the phandle reference is empty.
of_node reference counting is corrected in the same.
-----BEGIN PGP SIGNATURE-----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=b4Do
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent (SM8550+ ish) Qualcomm SoCs have a new mechanism for precisely
identifying the specific SKU and the precise speed bin (in the general
meaning of this word, anyway): a pair of values called Product Code
and Feature Code.
Based on this information, we can deduce the available frequencies for
things such as Adreno. In the case of Adreno specifically, Pcode is
useless for non-prototype SoCs.
Introduce a getter for the feature code and export it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-2-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In preparation for parsing the chip "feature code" (FC) and "product
code" (PC) (essentially the parameters that let us conclusively
characterize the sillicon we're running on, including various speed
bins), move the socinfo version defines to the public header.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-1-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Until SM8450, there was only one broadcast region (Broadcast_OR)
used to broadcast write and check for status bit 0.
>From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1. This hasn't been updated and
Broadcast_OR region was wrongly being used to check for status bit 1 all
along.
Hence define new regmap structure for Broadcast_AND region and initialize
this regmap when HW block version is greater than 4.1, otherwise
initialize as a NULL pointer for backwards compatibility.
Switch from broadcast_OR to broadcast_AND region (when defined in DT)
for checking status bit 1 as Broadcast_OR region checks only for bit 0.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/9cf19928a67eaa577ae0f02de5bf86276be34ea2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add qcom_smem_bust_hwspin_lock_by_host to enable remoteproc to bust the
hwspin_lock owned by smem. In the event the remoteproc crashes
unexpectedly, the remoteproc driver can invoke this API to try and bust
the hwspin_lock and release the lock if still held by the remoteproc
device.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-3-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Linus Torvalds