Make sure we screen the op flags field of recovered xattr intent log
items to reject flag bits that we don't know about.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a setxattr operation finds an xattr structure in leaf format, adding
the attr can fail due to lack of space and hence requires an upgrade to
node format. After this happens, we'll roll the transaction and
re-enter the state machine, at which time we need to perform a second
lookup of the attribute name to find its new location. This lookup
attaches a new da state structure to the xfs_attr_item but doesn't free
the old one (from the leaf lookup) and leaks it. Fix that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
kmemleak reported that we lost an xfs_da_state while removing xattrs in
generic/020:
unreferenced object 0xffff88801c0e4b40 (size 480):
comm "attr", pid 30515, jiffies 4294931061 (age 5.960s)
hex dump (first 32 bytes):
78 bc 65 07 00 c9 ff ff 00 30 60 1c 80 88 ff ff x.e......0`.....
02 00 00 00 00 00 00 00 80 18 83 4e 80 88 ff ff ...........N....
backtrace:
[<ffffffffa023ef4a>] xfs_da_state_alloc+0x1a/0x30 [xfs]
[<ffffffffa021b6f3>] xfs_attr_node_hasname+0x23/0x90 [xfs]
[<ffffffffa021c6f1>] xfs_attr_set_iter+0x441/0xa30 [xfs]
[<ffffffffa02b5104>] xfs_xattri_finish_update+0x44/0x80 [xfs]
[<ffffffffa02b515e>] xfs_attr_finish_item+0x1e/0x40 [xfs]
[<ffffffffa0244744>] xfs_defer_finish_noroll+0x184/0x740 [xfs]
[<ffffffffa02a6473>] __xfs_trans_commit+0x153/0x3e0 [xfs]
[<ffffffffa021d149>] xfs_attr_set+0x469/0x7e0 [xfs]
[<ffffffffa02a78d9>] xfs_xattr_set+0x89/0xd0 [xfs]
[<ffffffff812e6512>] __vfs_removexattr+0x52/0x70
[<ffffffff812e6a08>] __vfs_removexattr_locked+0xb8/0x150
[<ffffffff812e6af6>] vfs_removexattr+0x56/0x100
[<ffffffff812e6bf8>] removexattr+0x58/0x90
[<ffffffff812e6cce>] path_removexattr+0x9e/0xc0
[<ffffffff812e6d44>] __x64_sys_lremovexattr+0x14/0x20
[<ffffffff81786b35>] do_syscall_64+0x35/0x80
I think this is a consequence of xfs_attr_node_removename_setup
attaching a new da(btree) state to xfs_attr_item and never freeing it.
I /think/ it's the case that the remove paths could detach the da state
earlier in the remove state machine since nothing else accesses the
state. However, let's future-proof the new xattr code by adding a
catch-all when we free the xfs_attr_item to make sure we never leak the
da state.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We update KVM RISC-V maintainers entry to include appropriate KVM
selftests directories so that RISC-V related KVM selftests patches
are CC'ed to KVM RISC-V mailing list.
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, there is no provision for vmm (qemu-kvm or kvmtool) to
query about multiple-letter ISA extensions. The config register
is only used for base single letter ISA extensions.
A new ISA extension register is added that will allow the vmm
to query about any ISA extension one at a time. It is enabled for
both single letter or multi-letter ISA extensions. The ISA extension
register is useful to if the vmm requires to retrieve/set single
extension while the config register should be used if all the base
ISA extension required to retrieve or set.
For any multi-letter ISA extensions, the new register interface
must be used.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
On RISC-V platforms with hardware VMID support, we share same
VMID for all VCPUs of a particular Guest/VM. This means we might
have stale G-stage TLB entries on the current Host CPU due to
some other VCPU of the same Guest which ran previously on the
current Host CPU.
To cleanup stale TLB entries, we simply flush all G-stage TLB
entries by VMID whenever underlying Host CPU changes for a VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The generic KVM has support for VCPU requests which can be used
to do arch-specific work in the run-loop. We introduce remote
HFENCE functions which will internally use VCPU requests instead
of host SBI calls.
Advantages of doing remote HFENCEs as VCPU requests are:
1) Multiple VCPUs of a Guest may be running on different Host CPUs
so it is not always possible to determine the Host CPU mask for
doing Host SBI call. For example, when VCPU X wants to do HFENCE
on VCPU Y, it is possible that VCPU Y is blocked or in user-space
(i.e. vcpu->cpu < 0).
2) To support nested virtualization, we will be having a separate
shadow G-stage for each VCPU and a common host G-stage for the
entire Guest/VM. The VCPU requests based remote HFENCEs helps
us easily synchronize the common host G-stage and shadow G-stage
of each VCPU without any additional IPI calls.
This is also a preparatory patch for upcoming nested virtualization
support where we will be having a shadow G-stage page table for
each Guest VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the KVM_MAX_VCPUS value is 16384 for RV64 and 128
for RV32.
The KVM_MAX_VCPUS value is too high for RV64 and too low for
RV32 compared to other architectures (e.g. x86 sets it to 1024
and ARM64 sets it to 512). The too high value of KVM_MAX_VCPUS
on RV64 also leads to VCPU mask on stack consuming 2KB.
We set KVM_MAX_VCPUS to 1024 for both RV64 and RV32 to be
aligned other architectures.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Various __kvm_riscv_hfence_xyz() functions implemented in the
kvm/tlb.S are equivalent to corresponding HFENCE.GVMA instructions
and we don't have range based local HFENCE functions.
This patch provides complete set of local HFENCE functions which
supports range based TLB invalidation and supports HFENCE.VVMA
based functions. This is also a preparatory patch for upcoming
Svinval support in KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We should treat SBI HFENCE calls as NOPs until nested virtualization
is supported by KVM RISC-V. This will help us test booting a hypervisor
under KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The two-stage address translation defined by the RISC-V privileged
specification defines: VS-stage (guest virtual address to guest
physical address) programmed by the Guest OS and G-stage (guest
physical addree to host physical address) programmed by the
hypervisor.
To align with above terminology, we replace "stage2" with "gstage"
and "Stage2" with "G-stage" name everywhere in KVM RISC-V sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, we simply hang using "while (1) ;" upon any unexpected
guest traps because the default guest trap handler is guest_hang().
The above approach is not useful to anyone because KVM selftests
users will only see a hung application upon any unexpected guest
trap.
This patch improves unexpected guest trap handling for KVM RISC-V
selftests by doing the following:
1) Return to host user-space
2) Dump VCPU registers
3) Die using TEST_ASSERT(0, ...)
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Combination of LOOKUP_IS_SCOPED and NULL nd->root.mnt is impossible
after successful path_init(). All places where ->root.mnt might
become NULL do that only if LOOKUP_IS_SCOPED is not there and
path_init() itself can return success without setting nd->root
only if ND_ROOT_PRESET had been set (in which case nd->root
had been set by caller and never changed) or if the name had
been a relative one *and* none of the bits in LOOKUP_IS_SCOPED
had been present.
Since all calls of legitimize_root() must be downstream of successful
path_init(), the check for !nd->root.mnt && (nd->flags & LOOKUP_IS_SCOPED)
is pure paranoia.
FWIW, it had been discussed (and agreed upon) with Aleksa back when
scoped lookups had been merged; looks like that had fallen through the
cracks back then.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
!foo() != 0 is a strange way to spell !foo(); fallout from
"fs: make unlazy_walk() error handling consistent"...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mat Martineau says:
====================
mptcp: Miscellaneous fixes and a new test case
Patches 1 and 3 remove helpers that were iterating over the subflow
connection list without proper locking. Iteration was not needed in
either case.
Patch 2 fixes handling of MP_FAIL timeout, checking for orphaned
subflows instead of using the MPTCP socket data lock and connection
state.
Patch 4 adds a test for MP_FAIL timeout using tc pedit to induce checksum
failures.
====================
Link: https://lore.kernel.org/r/20220518220446.209750-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL
reset case. Use the test_linkfail value to make 1024KB test files.
Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules
to produce the bit flips to trigger the checksum failures on ns2eth2.
Add delays on ns2eth1 to make sure more data can translate on ns2eth2.
The check_invert flag is enabled in reset_with_fail(), so this test
prints out the inverted bytes, instead of the file mismatch errors.
Invoke pedit_action_pkts() to get the numbers of the packets edited
by the tc pedit actions, and print this numbers to the output.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP socket's conn_list (list of subflows) requires the socket lock
to access. The MP_FAIL timeout code added such an access, where it would
check the list of subflows both in timer context and (later) in workqueue
context where the socket lock is held.
Rather than check the list twice, remove the check in the timeout
handler and only depend on the check in the workqueue. Also remove the
MPTCP_FAIL_NO_RESPONSE flag, since mptcp_mp_fail_no_response() has
insignificant overhead and can be checked on each worker run.
Fixes: 49fa1919d6 ("mptcp: reset subflow when MP_FAIL doesn't respond")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MP_FAIL timeout (waiting for a peer to respond to an MP_FAIL with
another MP_FAIL) is implemented using the MPTCP socket's sk_timer. That
timer is also used at MPTCP socket close, so it's important to not have
the two timer users interfere with each other.
At MPTCP socket close, all subflows are orphaned before sk_timer is
manipulated. By checking the SOCK_DEAD flag on the subflows, each
subflow can determine if the timer is safe to alter without acquiring
any MPTCP-level lock. This replaces code that was using the
mptcp_data_lock and MPTCP-level socket state checks that did not
correctly protect the timer.
Fixes: 49fa1919d6 ("mptcp: reset subflow when MP_FAIL doesn't respond")
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned helper requires the msk socket lock, and the
current callers don't own it nor can't acquire it, so the
access is racy.
All the current callers are really checking for infinite mapping
fallback, and the latter condition is explicitly tracked by
the relevant msk variable: we can safely remove the caller usage
- and the caller itself.
The issue is present since MP_FAIL implementation, but the
fix only applies since the infinite fallback support, ence the
somewhat unexpected fixes tag.
Fixes: 0530020a7c ("mptcp: track and update contiguous data status")
Acked-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch improves TCP PRR loss recovery behavior for a corner
case. Previously during PRR conservation-bound mode, it strictly
sends the amount equals to the amount newly acked or s/acked.
The patch changes s.t. PRR may send additional amount that was banked
previously (e.g. application-limited) in the conservation-bound
mode, similar to the slow-start mode. This unifies and simplifies the
algorithm further and may improve the recovery latency. This change
still follow the general packet conservation design principle and
always keep inflight/cwnd below the slow start threshold set
by the congestion control module.
PRR is described in RFC 6937. We'll include this change in the
latest revision rfc6937-bis as well.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220519003410.2531936-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When removing the rcu_read_lock in bond_ethtool_get_ts_info() as
discussed [1], I didn't notice it could be called via setsockopt,
which doesn't hold rcu lock, as syzbot pointed:
stack backtrace:
CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline]
bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595
__ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554
ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568
sock_timestamping_bind_phc net/core/sock.c:869 [inline]
sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916
sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221
__sys_setsockopt+0x55e/0x6a0 net/socket.c:2223
__do_sys_setsockopt net/socket.c:2238 [inline]
__se_sys_setsockopt net/socket.c:2235 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2235
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f8902c8eb39
Fix it by adding rcu_read_lock and take a ref on the real_dev.
Since dev_hold() and dev_put() can take NULL these days, we can
skip checking if real_dev exist.
[1] https://lore.kernel.org/netdev/27565.1642742439@famine/
Reported-by: syzbot+92beb3d46aab498710fa@syzkaller.appspotmail.com
Fixes: aa6034678e ("bonding: use rcu_dereference_rtnl when get bonding active slave")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220519020148.1058344-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current title of our section of the documentation is
Linux Networking Documentation. Since we're describing
a section of Linux Documentation repeating those two
words seems redundant.
Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 12 warns:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
406 | if (!IPC_CB(skb)) {
| ^
Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl says:
====================
lantiq_gswip: Two small fixes
While updating the Lantiq target in OpenWrt to Linux 5.15 I came across
an FDB related error message. While that still needs to be solved I
found two other small issues on the way.
This series fixes the two minor issues found while revisiting the FDB
code in the lantiq_gswip driver:
- The first patch fixes the start index used in gswip_port_fdb() to
find the entry with the matching bridge. The updated logic is now
consistent with the rest of the driver.
- The second patch fixes a typo in a dev_err() message.
[0] https://lore.kernel.org/netdev/20220517194015.1081632-1-martin.blumenstingl@googlemail.com/
====================
Link: https://lore.kernel.org/r/20220518220051.1520023-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gswip_port_fdb_dump() reads the MAC bridge entries. The error message
should say "failed to read mac bridge entry". While here, also add the
index to the error print so humans can get to the cause of the problem
easier.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first N entries in priv->vlans are reserved for managing ports which
are not part of a bridge. Use priv->hw_info->max_ports to consistently
access per-bridge entries at index 7. Starting at
priv->hw_info->cpu_port (6) is harmless in this case because
priv->vlan[6].bridge is always NULL so the comparison result is always
false (which results in this entry being skipped).
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t7xx_request_irq() error: uninitialized symbol 'ret'.
t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'.
If the condition to enter the loop that waits for the handshake event
is false on the first iteration then the uninitialized 'event' will be
dereferenced, fix this by initializing 'event' to NULL.
t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'.
No need to check skb at t7xx_port_proxy_recv_skb() since we know it
is always called with a valid skb by t7xx_cldma_gpd_rx_from_q().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
mtk_eth_soc phylink updates
This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
fixes along the way.
Previous attempts to update this driver (which is now marked as legacy)
have failed due to lack of testing. I am hoping that this time will be
different; Marek can test RGMII modes, but not SGMII. So all that we
know is that this patch series probably doesn't break RGMII.
1) remove unused mac_mode and sgmii flags members from structures.
2) remove unnecessary interpretation of speed when configuring 1000
and 2500 Base-X
3) move configuration of SGMII duplex setting from mac_config() to
link_up()
4) only pass in interface mode to mtk_sgmii_setup_mode_force()
5) move decision about which mtk_sgmii_setup_mode_*() function to call
into mtk_sgmii.c
6) add a fixme comment for RGMII explaning why the call to
mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
addressed by someone who has the hardware and can test an appropriate
fix. This fixme means that the driver still can't become non-legacy.
7) move gmac setup from mac_config() to mac_finish() - this preserves
the order that we write to the hardware when we eventually convert to
phylink_pcs()
8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
for the same reasons as (7).
9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
suit conversion to phylink_pcs
10) finally convert to phylink_pcs
As there has been no feedback from mtk_eth_soc maintainers to my RFC
on April 6th, not my reminder on April 11th, so it's now time to merge
this anyway. Mediatek code seems to be submitted to the kernel and
then the maintainers scarper...
====================
Link: https://lore.kernel.org/r/YoUIX+BN/ZbyXzTT@shell.armlinux.org.uk
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Partially convert mtk_eth_soc to phylink_pcs, moving the configuration,
link up and AN restart over. However, it seems mac_pcs_get_state()
doesn't actually get the state from the PCS, so we can't convert that
over without a better understanding of the hardware.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a
disabled state. In order to preserve this when we switch to phylink_pcs
we need to move the restoration of this register to the mac_finish()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the setting of the MTK_MAC_MCR register from the end of mac_config
into the phylink mac_finish() method, to keep it as the very last write
that is done during configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a fixme comment for the last remaining incorrect usage of
state->speed in the mac_config() method, which is strangely in a code
path which is only run when the PHY interface mode changes.
This means if we are in RGMII mode, changes in state->speed will not
cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to
be set according to the speed, nor will the TRGPLL clock be set to the
correct value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide mtk_sgmii_config() to wrap up the decisions about which SGMII
configuration will be called.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that mtk_sgmii_setup_mode_force() only uses the interface mode
from the phylink state, pass just the interface mode into this
function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phylink does not guarantee that state->duplex will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Move the 802.3z PCS duplex configuration to mac_link_up().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phylink does not guarantee that state->speed will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Moreover, it is making use of it in a function that is only ever called
for 1000BASE-X and 2500BASE-X which operate at a fixed speed which
happens to be the same setting irrespective of the interface mode. We
can simply remove the switch statement and just set the SGMII interface
speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PCS speed setting is a two bit field, but it is defined as two
separate bits. Add a bitfield mask for the speed definitions, an
use the FIELD_PREP() macro to define each PCS speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "flags" member of struct mtk_sgmii appears to be unused, as are
the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac->mode is only ever written to in one location, and is thus
superflous. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Darrick J. Wong