Create 4 test cases:
- Force red to dequeue from its child's gso_skb with qfq leaf
- Force sfb to dequeue from its child's gso_skb with qfq leaf
- Force red to dequeue from its child's gso_skb with dualpi2 leaf
- Force sfb to dequeue from its child's gso_skb with dualpi2 leaf
All of them have tbf followed by red (or sfb) followed by qfq (or
dualpi2). Since tbf calls its child's peek followed by
qdisc_dequeue_peeked, it will force red/sfb to call their child's peek.
In this case, since the child (qfq/dualpi2) has qdisc_peek_dequeued as
its peek callback, the packet will be stored in its gso_skb queue. During
the subsequent call to qdisc_dequeue_peeked, red/sfb will have to dequeue
from the child's gso_skb to retrieve the packet.
Not doing so will cause a NULL ptr deref which was happening before a
recent fix.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260430152957.194015-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the previous commit, TCP failed to switch to alternative
IPv6 routes immediately upon carrier loss.
It would persist with the dead route until reaching the threshold
net.ipv4.tcp_retries1, leading to unnecessary delays in failover.
Let's add a selftest for this scenario to ensure TCP fails over
immediately upon a carrier loss event.
Before:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [FAIL]
After:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Link: https://patch.msgid.link/20260430200909.527827-3-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor clarifications in the README:
- call out what linters we expect to be clean
- make it clear that by "frameworks" we mean code under lib/
not just factoring code out in the same file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
* Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
* Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
* Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
* Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
* Make kvm_vcpu_initialized() correctly use its parameter instead
of relying on the surrounding context
* Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
* Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
* Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...).
* Spelling fixes
Selftests:
* Rename types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
* Fix Loongarch compilation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnvHfwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO+DQf/eEi0jLfQc7EBn6JQNU9AhegPDu0s
o76HQwI1/NuKodV8txpNKISvkwvc6CVzatAJLJ781VYu+a/lI9EXOsZI8dnlbYy4
M6j0Lo58rneEkb5rplzo8+ds300OZeXQBOlC7loCmLakhtEOrdrmfTVmi+U3BqdP
Q15kCEymuLLqxQggRivd2flyKHT7vY2HeuYJa+ocnqV8qNNUKDmyIwPoTbZ44Plo
c+EU7rOSwvFlYFDP19oViIwoW89/vUkF762U0EkLcsWwB4k5L8qoybog9cYAJ9u4
AG7wmwczkOlJKFwrIDD2Fx8JARqSIZhitwzT+zA/aUOtOl8fRwRKfHpsWw==
=PoE5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in tools/testing/selftests/kvm - these were
unnecessarily different from what the kernel uses, so they're being
made consistent.
arm64:
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead of
relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...)
- Spelling fixes
Selftests:
- Rename types across all KVM selftests to more closely align with
types used in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
- Fix Loongarch compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: selftests: Add check_steal_time_uapi() implementation for LoongArch
KVM: arm64: Wake-up from WFI when iqrchip is in userspace
KVM: arm64: Fix initialisation order in __pkvm_init_finalise()
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
KVM: arm64: Fix kvm_vcpu_initialized() macro parameter
KVM: arm64: Fix FEAT_SPE_FnE to use PMSIDR_EL1.FnE, not PMSVer
KVM: arm64: Fix typo in feature check comments
KVM: arm64: Fix FEAT_Debugv8p9 to check DebugVer, not PMUVer
KVM: arm64: Reject non compliant SMCCC function calls in pKVM
KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value
KVM: selftests: Replace "paddr" with "gpa" throughout
KVM: selftests: Replace "u64 nested_paddr" with "gpa_t l2_gpa"
KVM: selftests: Replace "u64 gpa" with "gpa_t" throughout
KVM: selftests: Replace "vaddr" with "gva" throughout
KVM: selftests: Clarify that arm64's inject_uer() takes a host PA, not a guest PA
KVM: selftests: Rename translate_to_host_paddr() => translate_hva_to_hpa()
KVM: selftests: Rename vm_vaddr_populate_bitmap() => vm_populate_gva_bitmap()
KVM: selftests: Rename vm_vaddr_unused_gap() => vm_unused_gva_gap()
KVM: selftests: Drop "vaddr_" from APIs that allocate memory for a given VM
KVM: selftests: Use u8 instead of uint8_t
...
The merge window pulled in the cgroup sub-scheduler infrastructure, and
new AI reviews are accelerating bug reporting and fixing - hence the
larger than usual fixes batch.
- Use-after-frees during scheduler load/unload. The disable path
could free the BPF scheduler while deferred irq_work / kthread work
was still in flight; cgroup setter callbacks read the active
scheduler outside the rwsem that synchronizes against teardown.
Fixed both, and reused the disable drain in the enable error paths
so the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock. Fixed at the affected
callsites, including recursive parent-into-child dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounced through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy: helper
kfuncs hard-coded the root instead of resolving the caller's
scheduler; the enable error path tried to disable per-task state
that had never been initialized, and leaked cpus_read_lock on the
way out; a sysfs object was leaked on every load/unload; the
dispatch fast-path used the root scheduler instead of the task's;
and a couple of CONFIG #ifdef guards were misclassified.
- Verifier-time hardening: BPF programs of unrelated struct_ops
types (e.g. tcp_congestion_ops) could call sched_ext kfuncs - a
semantic bug and, once sub-sched was enabled, a KASAN
out-of-bounds read. Now rejected at load. Plus a few NULL and
cross-task argument checks on sched_ext kfuncs, and a selftest
covering the new deny.
- rhashtable (Herbert): restored the insecure_elasticity toggle and
bounced the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Moved
per-instance, plus a follow-up to skip tasks whose recorded CPU is
stale relative to the new owning runqueue.
- Smaller fixes: a dispatch queue's first-task tracking misbehaved
when a parked iterator cursor sat in the list; the runqueue's
next-class wasn't promoted on local-queue enqueue, leaving an SCX
task behind RT in edge cases; the reference qmap scheduler stopped
erroring on legitimate cross-scheduler task-storage misses.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCafEN/A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaydAQCxWrUqnZXhxF4LnztjxTF2tgv7p8P7TbpS6aU6
etqRpAEA9RFmIXs7XrhwCm0n2BwSgjvrNxnWfPhWvuH0uN0GTAA=
=wLna
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
Add a regression test for the NULL pointer dereference fixed in the
previous commit. Before the fix, taprio_graft() stored NULL into
q->qdiscs[cl - 1] when an explicitly grafted child qdisc was deleted
via RTM_DELQDISC; the next RTM_GETTCLASS dump then crashed the kernel
in taprio_dump_class() while reading child->handle.
The test installs a taprio root qdisc on a multi-queue netdevsim
device, grafts a pfifo child onto class 8001:1, deletes that child,
and then performs a class dump. On a fixed kernel the dump succeeds
and all eight taprio classes are listed; on an unpatched kernel the
class dump crashes, which surfaces as a test failure.
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260422161958.2517539-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
-----BEGIN PGP SIGNATURE-----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=nYWK
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_kernel_types-7.1' of https://github.com/kvm-x86/linux into HEAD
KVM selftests type renames for 7.1
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
Define check_steal_time_uapi() for LoongArch so that the steal_time test
builds. Note, while LoongArch's steal_time_init() has some funky asserts,
none of the code is uniquely verifying KVM's uAPI.
Cc: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Cc: Jiakai Xu <jiakaiPeanut@gmail.com>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Fixes: 40351ed924 ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260420192644.3892050-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0AP+
-----END PGP SIGNATURE-----
Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to the
specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC, etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase
-----BEGIN PGP SIGNATURE-----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=hG4G
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"There is one significant change outside arch/riscv in this pull
request: the addition of a set of KUnit tests for strlen(), strnlen(),
and strrchr().
Otherwise, the most notable changes are to add some RISC-V-specific
string function implementations, to remove XIP kernel support, to add
hardware error exception handling, and to optimize our runtime
unaligned access speed testing.
A few comments on the motivation for removing XIP support. It's been
broken in the RISC-V kernel for months. The code is not easy to
maintain. Furthermore, for XIP support to truly be useful for RISC-V,
we think that compile-time feature switches would need to be added for
many of the RISC-V ISA features and microarchitectural properties that
are currently implemented with runtime patching. No one has stepped
forward to take responsibility for that work, so many of us think it's
best to remove it until clear use cases and champions emerge.
Summary:
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to
the specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC,
etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase"
* tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
riscv: Remove support for XIP kernel
riscv: Reuse compare_unaligned_access() in check_vector_unaligned_access()
riscv: Split out compare_unaligned_access()
riscv: Reuse measure_cycles() in check_vector_unaligned_access()
riscv: Split out measure_cycles() for reuse
riscv: Clean up & optimize unaligned scalar access probe
riscv: lib: add strrchr() implementation
riscv: lib: add strchr() implementation
riscv: lib: add strnlen() implementation
lib/string_kunit: extend benchmarks to strnlen() and chr searches
lib/string_kunit: add performance benchmark for strlen()
lib/string_kunit: add correctness test for strrchr()
lib/string_kunit: add correctness test for strnlen()
lib/string_kunit: add correctness test for strlen()
riscv: vdso_cfi: Add .gitignore for build artifacts
riscv: vdso_cfi: Add clean rule for copied sources
riscv: enable HAVE_IOREMAP_PROT
riscv: mm: WARN_ON() for bad addresses in vmemmap_populate()
riscv: acpi: update FADT revision check to 6.6
riscv: add hardware error trap handler support
...
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery.
A newer big source is Sashiko/Gemini (Roman Gushchin's system),
which points out issues in existing code during patch review
(maybe 25% of fixes here likely originating from Sashiko).
Nice thing is these are often fixed by the respective maintainers,
not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised
to be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=knNy
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
Inside migrate_dance(), add epoll checks around shutdown() to
verify that the target listener is not ready before shutdown()
and becomes ready immediately after shutdown() triggers migration.
Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV
as it depends on later handshake completion.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Link: https://patch.msgid.link/20260422024554.130346-3-jt26wzz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 / RFC 793 Section 3.9 require a challenge ACK
whenever an incoming SEG.ACK falls outside
[SND.UNA - MAX.SND.WND, SND.NXT]. There is currently no packetdrill
coverage for either edge.
Add tcp_rfc5961_ack-out-of-window.pkt, which in a single passive-open
connection exercises:
- Upper edge (SEG.ACK > SND.NXT): peer ACKs data that was never
sent before the server has transmitted anything.
- Lower edge (SEG.ACK < SND.UNA - MAX.SND.WND): after the server
has sent 2000 bytes (the peer-advertised rwnd forces two 1000-byte
segments, both acknowledged), peer sends an ACK that is older
than the acceptable window.
Both cases must elicit a challenge ACK
<SEQ = SND.NXT, ACK = RCV.NXT, CTL = ACK>. The per-socket RFC 5961
Section 7 rate limit is disabled for the duration of the test so that
both challenge ACKs can fire back-to-back.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:
"All incoming segments whose ACK value doesn't satisfy the above
condition MUST be discarded and an ACK sent back."
Commit 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:
"If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
then send an ACK, drop the segment, and return."
Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited(). FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.
Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new chk_sndbuf() helper to diag.sh that extracts the sndbuf
(the 'tb' field from 'ss -m' skmem output) for both server and
client MPTCP sockets, and verifies they are equal.
Without the previous patch, it will fail:
'''
07 ....chk sndbuf server/client [FAIL] sndbuf S=20480 != C=2630656
'''
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-2-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fio 3.42 was released with the needed fix for test_integrity_02.sh.
Allow 3.42 and newer in the fio version check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The _cleanup helper function doesn't take any arguments, so drop them
from its callers.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to do the following load-acquire and store-release tests on
LoongArch:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
It needs to enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file to
analyze the failure. The Perl function localtime is used to create the
data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not account
for that. Thus for April 20, 2026, the timestamp of 20260320 is used,
instead of 20260420.
- Save the logfile to the failure directory
Just the test log is saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to analyzing
the failure. Save the logfile as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeknTxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm9hAP9jPNvXaCqvcGfz9QN2fEOs7sWWVOAQ
gryZ8Nyqn4CmswD/aQkYBVRSeWsvUrbw7WYrFvEOH0hUfKD6CaFLaA6EigE=
=ONM2
-----END PGP SIGNATURE-----
Merge tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file
to analyze the failure. The Perl function localtime is used to create
the data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not
account for that. Thus for April 20, 2026, the timestamp of 20260320
is used, instead of 20260420.
- Save the logfile to the failure directory
Just the test log was saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to
analyzing the failure. Save the logfile as well.
* tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add logfile to failure directory
ktest: Fix the month in the name of the failure directory
Replace teamd daemon usage with ip link commands for team device
setup. teamd -d daemonizes and returns to the shell before port
addition completes, creating a race: the test may create the macvlan
(and check for its address on a slave) before teamd has finished
adding ports. This makes the test inherently dependent on scheduling
timing.
Using ip commands makes port addition synchronous, removing the race
and making the test deterministic.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-16-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes regressions in non-bash shells and busybox support, and reverts
a commit that regression in build and installation when one or more
tests fail to build. Fixes duplicated test number reporting introduced
in ktap support patch.
- selftests: Fix duplicated test number reporting
- selftests: Fix runner.sh for non-bash shells
- selftests: Fix runner.sh busybox support
- selftests: Deescalate error reporting
-----BEGIN PGP SIGNATURE-----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=1k+f
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix regressions in non-bash shells and busybox support, and revert a
commit that regressed in build and installation when one or more tests
fail to build.
Fix duplicated test number reporting introduced in ktap support patch"
* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix duplicated test number reporting
selftests: Fix runner.sh for non-bash shells
selftests: Fix runner.sh busybox support
selftests: Deescalate error reporting
Replace all variations of "paddr" variables in KVM selftests with "gpa",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_paddr_t to
gpa_t.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In x86's nested TDP APIs, use the appropriate gpa_t typedef and rename
variables from nested_paddr to l2_gpa to match KVM x86's nomenclature.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace all variations of "vaddr" variables in KVM selftests with "gva",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_vaddr_t to
gva_t.
Opportunistically use gva_t instead of u64 for relevant variables, and
fixup indentation as appropriate.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename inject_uer()'s @paddr to @hpa to make it more obvious that it
injects an error using a host PA, not a guest PA.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename arm64's translate_to_host_paddr() to translate_hva_to_hpa() and
update variable names to match, as using "vaddr" and "paddr" terminology
is super confusing due to selftests using those exact names for *guest*
addresses.
Opportunisitically drop superfluous local page_addr and paddr variables.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the helper
for populating the initial GVA bitmap to drop the defunct terminology and
use "vm" for the scope.
Opportunistically fixup the declaration of the API, which has been broken
since day 1. The flaw went unnoticed because the sole caller is defined
after the weak version, i.e. can see the prototype without a previous
declaration.
No functional change intended.
Fixes: e8b9a055fa ("KVM: arm64: selftests: Align VA space allocator with TTBR0")
Link: https://patch.msgid.link/20260420212004.3938325-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the API
for finding an unused range of virtual memory to drop the defunct
terminology and use "vm" for the scope.
Opportunistically clean up the function comment to drop superfluous
and redundant information.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM selftests use gva_t instead of vm_vaddr_t, drop "vaddr_" from
the core memory allocation APIs as the information is extraneous and does
more harm than good. E.g. the APIs don't _just_ allocate virtual memory,
they allocate backing physical memory and install mappings in the guest
page tables. And as proven by kmalloc() and malloc(), developers generally
expect that allocations come with a working virtual address.
Opportunistically clean up the function comment for vm_alloc(), and drop
the misleading and superfluous comments for its wrappers.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use u8 instead of uint8_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint8_t/u8/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use s16 instead of int16_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int16_t/s16/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use u16 instead of uint16_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint16_t/u16/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use s32 instead of int32_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int32_t/s32/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use u32 instead of uint32_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint32_t/u32/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use s64 instead of int64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/int64_t/s64/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use u64 instead of uint64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint64_t/u64/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
Include <linux/types.h> in include/kvm_util_types.h, iinclude/test_util.h,
and include/x86/pmu.h to pick up the tools-defined u64. Arguably, all
headers (especially kvm_util_types.h) should have already been including
stdint.h to get uint64_t from the libc headers, but the missing dependency
only rears its head once KVM uses u64 instead of uint64_t.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: rename pread_uint64() => pread_u64, expand on types.h include]
Link: https://patch.msgid.link/20260420212004.3938325-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix various Hyper-V selftests to use gpa_t for variables that contain
guest physical addresses, rather than gva_t. In practice, the bugs are
benign as both gva_t and gpa_t are u64 typedefs, i.e. gpa_t and gva_t are
interchangeable from a functional perspective, the code is just confusing.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: call out that both are u64 typedefs]
Link: https://patch.msgid.link/20260420212004.3938325-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace all occurrences of vm_paddr_t with gpa_t to align with KVM code
and with the conversion helpers (e.g. addr_hva2gpa()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_paddr_/gpa_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop bogus changelog blurb about renaming functions]
Link: https://patch.msgid.link/20260420212004.3938325-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace all occurrences of vm_vaddr_t with gva_t to align with KVM code
and with the conversion helpers (e.g. addr_gva2hva()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_vaddr_/gva_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy, and
dropping renames of functions that allocate memory within a given VM.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop renames of allocator APIs]
Link: https://patch.msgid.link/20260420212004.3938325-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The logfile contains a lot of useful information about the tests being
run. Add it to the stored failure directory when the test fails.
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142315.7bbc3624@fedora
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The Perl localtime() function returns the month starting at 0 not 1. This
caused the date produced to create the directory for saving files of a
failed run to have the month off by one.
machine-test-useconfig-fail-20260314073628
The above happened in April, not March. The correct name should have been:
machine-test-useconfig-fail-20260414073628
This was somewhat confusing.
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142426.33ad0293@fedora
Fixes: 7faafbd696 ("ktest: Add open and close console and start stop monitor")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Usual collection of driver changes, more core infrastructure updates that
typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
- Promote UMEM to a core component, split out DMA block iterator logic
- Introduce FRMR pools with aging, statistics, pinned handles, and netlink
control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
- Fixes:
IB/core zero dmac neighbor resolution race
GID table memory free
rxe pad/ICRC validation and r_key async errors
mlx4 external umem for CQ
umem DMA attributes on unmap
mana_ib RX steering on RSS QP destroy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
=dd92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
Jakub Kicinski