POWER_SEQUENCING_PCIE_M2 driver handles power supply to the PCIe M.2
connectors and is required on wide variety of ARM64 platforms such as
Qcom Snapdragon X Elite laptops and Mediatek Dojo Chromebooks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514065017.11305-1-manivannan.sadhasivam@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2
-----BEGIN PGP SIGNATURE-----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=nOGB
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC ARM code updates from Arnd Bergmann:
"These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2"
* tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
arm64: Kconfig: provide a top-level switch for Microchip platforms
ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
ARM: samsung: exynos5250: Allow CPU1 to boot
As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic arm32
defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at
the same time as the Kconfig change here.
-----BEGIN PGP SIGNATURE-----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=OCxO
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic
arm32 defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at the
same time as the Kconfig change here"
* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
ARM: shmobile: defconfig: Refresh for v7.0-rc1
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
...
A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs,
and two older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and IOT
(QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53 cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores, with
additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using low-end
Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M
or i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last
board specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip
-----BEGIN PGP SIGNATURE-----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=5Dwm
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drop the various ARCH_TEGRA_*_SOC options from the default configurations
since they are now enabled by default for ARCH_TEGRA.
-----BEGIN PGP SIGNATURE-----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=wTj9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnO2k0ACgkQmmx57+YA
GNkQdBAAlZziCDxQ+2D1fTo7vuYv7Jge5aIrDq0SnjmiKmozryDVDPjEVc28ZyQP
40xLfG39y660e2KZVef11KyCfyf08/juE6jVdoktAEJuhpzCSdH2uXbtOWmmyLkr
U6T1uYMDIcemcoS06fuNitpPNO4EtpYI3gGflAsTapZoLZ91gfTpgQhpmKy4P7IP
3F3juMg/Nz3tcIkUYD4whozIr8ydwwwjb2+LR+Nq+hRs/0jOpNQftpzJxyyRk7Us
sb/h6EJ19Tw1r6sSbhYIGlzB1jI+uSMqbFOdPFutoOOiAZisGMqn1zA9ZVYjjqZP
Le32noTbDdRgTUD+FL8AMaNCjE2z/2+FprJWeawymxGgwwMvRlS7mwIjQ1ali9Og
yobCKgIzWw6x/ZN7R2hiSM2B2nWl0sXBybAHeMuB3yjPsYTuA3UNRn+0X/zd8nKp
pMIoYkyYH3ph4HeRZ1IsSFbgnFd8PJSLfy3H2GODzZrYC9R3HSUEyEOcxeEa8Hfn
Mq2nxaDTByBbLPSQKUsbP5oV5siDmpGtQXEvP4n77yPfhcxfVnCEwqUDXq3bHy6w
93emHfcODaMrTmvh/UKyHPDHI9AZs206PsRm+3ejgKNSz8QrA6f6EhgWM3Yd1wIm
8ciHwK/ZC4D1Mx/qXDZGjOrljhm57Wz1tOtX4ZybNrRmN27+hqg=
=dDLy
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: tegra: Default configuration changes for v7.1-rc1
Drop the various ARCH_TEGRA_*_SOC options from the default configurations
since they are now enabled by default for ARCH_TEGRA.
* tag 'tegra-for-7.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable DP83TG720 PHY driver as a module to support TI's DP83TG720
1000BASE-T1 Automotive Ethernet PHY. This is required for the
DP83TG720-IND-SPE-EVM daughter card used with AM642 EVM ICSSG0
interface.
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20260323090358.632329-3-m-malladi@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable STMicroelectronics STM32 display support as module.
This includes:
* DRM_STM
* DRM_STM_LVDS
* BACKLIGHT_GPIO
* TOUCHSCREEN_ILI210X
This display is used on several SoCs and boards such as STM32MP257F-EV1
and STM32MP257F-DK.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260205-master-v1-1-dcefcabc2934@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
All CONFIG_ARCH_TEGRA_132_SOC-like symbols are now default for
ARCH_TEGRA, so drop redundant lines from defconfig. Tested with
comparing include/generated/autoconf.h.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the generic power control driver module since it's required
to power up the PCIe USB3 controller found on the Ayaneo Pocket S2
gaming console.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-1-797bf96df771@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of exposing the arm64-optimized SM3 code via arm64-specific
crypto_shash algorithms, instead just implement the sm3_blocks() library
function. This is much simpler, it makes the SM3 library functions be
arm64-optimized, and it fixes the longstanding issue where the
arm64-optimized SM3 code was disabled by default. SM3 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Tweak the SM3 assembly function prototypes to match what the library
expects, including changing the block count from 'int' to 'size_t'.
sm3_ce_transform() had to be updated to access 'x2' instead of 'w2',
while sm3_neon_transform() already used 'x2'.
Remove the CFI stubs which are no longer needed because the SM3 assembly
functions are no longer ever indirectly called.
Remove the dependency on KERNEL_MODE_NEON. It was unnecessary, because
KERNEL_MODE_NEON is always enabled on arm64.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Enable the driver for Qualcomm Eliza SoC display clock controller, used
for example on Qualcomm Eliza MTP board.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260319-clk-qcom-dispcc-eliza-v3-3-d1f2b19a6e6b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GCC, Pinctrl for Qualcomm's IPQ5210 SoC which is required to boot
ipq5210-rdp504 board to a console shell.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260318-ipq5210_boot_to_shell-v2-6-a87e27c37070@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Kaanapali display, video, camera and gpu clock controller
for their respective functionalities on the Qualcomm Kaanapali QRD and
MTP boards.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-10-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the interconnect, pinctrl and Global Clock Controller (GCC)
providers as built-in, and the Top Control and Status Register (TCSR)
clock provider as module, on the Qualcomm Eliza SoC.
These are all necessary in order to be able to boot up Eliza-based MTP
board with debug UART and rootfs on UFS storage.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260316-arm64-defconfig-enable-eliza-basic-providers-v1-1-7ae581670aa8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the S5KJN1 driver which is used for the front camera on the
Fairphone 5 smartphone.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313-fp5-s5kjn1-v1-3-fa4f1c727318@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Microchip is the only platform that doesn't have a top-level switch for
disabling all SoC families. Align it with other platforms and update the
arm64 defconfig to keep the default config the same.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260226143615.65788-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Enable the configurations needed for Aquila AM69 SoM and compatible
carrier boards.
- CONFIG_SENSORS_AMC6821, needed for the fan controller on the clover
and dev carrier board (as module).
- CONFIG_POWER_RESET_GPIO and CONFIG_POWER_RESET_GPIO_RESTART needed
for poweroff and restart functionalities (as built-in, it's not
possible to set them as 'm').
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260306153130.102972-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable the Qualcomm WCD937x headphone audio codec as a loadable module,
as it is now required on the QCM6490 IDP platform.
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260121102606.1753970-1-ajay.nandam@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All Qualcomm SoCs starting from SM8650 provide access to the Qualcomm
Trusted Execution Environment (QTEE) through the SMCInvoke interface,
implemented by the QCOMTEE driver. QTEE runs in the Secure World domain
on ARM64 CPUs and exposes secure services to Linux running in the Normal
World domain.
This change enables the QCOMTEE driver as a module to support
communication with QTEE.
QCOMTEE has been tested on a Qualcomm RB3Gen2 board by loading and
executing a Trusted Application via tests hosted at
github.com/qualcomm/minkipc.
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260114-qcom_qcomtee_defconfig-v4-1-ec676311171f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable pinctrl, clocks and interconnect drivers as built-in
in order for serial console to be available before kernel
reaches "init" on Qualcomm Glymur CRD.
Additionally, booting rootfs from NVMe requires TCSRCC to
be enabled as module
Enable dispcc as module which is a dependency for display enablement
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-2-8ce4e489ebb6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the SM8750 video, camera and gpu clock controller for their
respective functionalities on the Qualcomm SM8750 MTP boards.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-sm8750_defconfig_cc-v1-1-666aa922b392@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These are the usual updates, enabling mode newly merged device drivers for
various Arm and RISC-V based platforms in the defconfig files. The Renesas
and NXP defconfig files also get a refresh for modified Kconfig options.
-----BEGIN PGP SIGNATURE-----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=tlG5
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"These are the usual updates, enabling mode newly merged device drivers
for various Arm and RISC-V based platforms in the defconfig files.
The Renesas and NXP defconfig files also get a refresh for modified
Kconfig options"
* tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: defconfig: spacemit: k3: enable clock support
ARM: defconfig: turn off CONFIG_EXPERT
ARM: defconfig: move entries
arm64: defconfig: Enable configurations for Kontron SMARC-sAM67
ARM: imx_v4_v5_defconfig: update for v6.19-rc1
arm64: defconfig: Enable Apple Silicon drivers
arm64: select APPLE_PMGR_PWRSTATE for ARCH_APPLE
arm64: defconfig: Enable Mediatek HDMIv2 driver
ARM: shmobile: defconfig: Refresh for v6.19-rc1
arm64: defconfig: Enable PCIe for the Renesas RZ/G3S SoC
arm64: defconfig: Enable RZ/G3E USB3 PHY driver
arm64: defconfig: Enable EC drivers for Qualcomm-based laptops
arm64: defconfig: Enable options for Qualcomm Milos SoC
ARM: imx_v6_v7_defconfig: enable EPD regulator needed for Kobo Clara 2e
ARM: imx_v6_v7_defconfig: Configure CONFIG_SND_SOC_FSL_ASOC_CARD as module
ARM: multi_v7_defconfig: enable DA9052 and MC13XXX
arm64: defconfig: enable clocks, interconnect and pinctrl for Qualcomm Kaanapali
arm64: defconfig: Drop duplicate CONFIG_OMAP_USB2 entry
arm64: defconfig: Enable missing AMD/Xilinx drivers
This adds a single change, enabling to compile the
MediaTek HDMIv2 driver as module.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCaXNXxBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeHy4AP49d82SuocGcFFLzdBTW57mAtQ5TBAc
90pCAGuE7K8Q+QEA4kwwSpb1Uh3IqiOEDa9kmsZsAwgFSh5aiWzrr7GFJgM=
=SSM5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mxBQ
-----END PGP SIGNATURE-----
Merge tag 'mtk-defconfig-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek defconfig updates
This adds a single change, enabling to compile the
MediaTek HDMIv2 driver as module.
* tag 'mtk-defconfig-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable Mediatek HDMIv2 driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable most drivers required for Apple Silicon as module inside
defconfig
- Enable the power-domain driver when ARCH_APPLE and PM is selected
since it's critical for booting these systems
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaW0y1QAKCRBEEX0kKnUe
6dr9APsG8qielrxskzqZ5YQVdQoEo9KHfGWWgO3mjJzYiTCZjwD/YH7E6tkEO18b
8S5F+6g7CKOX2I2o1RpCC6RPaTzYywU=
=CIeV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Plgq
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-defconfig-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/defconfig
Apple SoC defconfig update for 6.20
- Enable most drivers required for Apple Silicon as module inside
defconfig
- Enable the power-domain driver when ARCH_APPLE and PM is selected
since it's critical for booting these systems
* tag 'apple-soc-defconfig-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: defconfig: Enable Apple Silicon drivers
arm64: select APPLE_PMGR_PWRSTATE for ARCH_APPLE
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm SC7280 and SM8350 SoCs have slightly different LPASS audio
blocks (v9.4.5 and v9.2), however the LPASS LPI pin controllers are
exactly the same. The driver for SM8350 has two issues, which can be
fixed by simply moving over to SC7280 driver which has them correct:
1. "i2s2_data_groups" listed twice GPIO12, but should have both GPIO12
and GPIO13,
2. "swr_tx_data_groups" contained GPIO5 for "swr_tx_data2" function, but
that function is also available on GPIO14, thus listing it twice is
not necessary. OTOH, GPIO5 has also "swr_rx_data1", so selecting
swr_rx_data function should not block the TX one.
Fixes: be9f6d5638 ("pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Enable drivers for hardware present on Apple Silicon machines. None of
these drivers are critical so build them as modules. The reset and RTC
macsmc drivers would be useful as built-in drivers but they have large
dependencies so keep them as modules.
The size increases are minor and are offsetted by already merged
"default ARCH_APPLE" removals from the linked original submission.
vmlinux 157782640 -> 157902032 (+119392)
Image 41007616 -> 41073152 (+ 65536)
Link: https://lore.kernel.org/asahi/20250612-apple-kconfig-defconfig-v1-0-0e6f9cb512c1@kernel.org/
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251231-arch-arm64-apple-defconfig-v1-2-4ff19805ba39@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
In order to enable the HDMI output support on Mediatek Genio 510-EVK,
700-EVK, and 1200-EVK boards, enable the driver for it in the default
configuration.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable the pinctrl, clock and interconnect drivers for the Qualcomm
Milos SoC. This is required for booting The Fairphone (Gen. 6).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251219-milos-defconfig-v1-1-f58012ac8ef6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable necessary drivers for booting Qualcomm Kaanapali QRD and MTP
boards. The serial engine must be properly setup before kernel reach
"init", so UART driver and its dependencies needs to be built in, enable
its dependency GCC, interconnect and pinctrl as built-in meanwhile enable
TCSRCC as module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-2-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
CONFIG_OMAP_USB2 is already enabled as a module in the default defconfig
since commit 8a703a728a ("arm64: defconfig: Enable USB2 PHY Driver").
Remove the duplicate entry to fix the following warning:
arch/arm64/configs/defconfig:1705:warning: override: reassigning to symbol OMAP_USB2
Fixes: 91fe3315cdf9f ("arm64: defconfig: Enable missing AMD/Xilinx drivers")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20251015150728.118296-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Over years number of upstream drivers have grown for AMD/Xilinx SOCs
(ZynqMP, Versal, Versal NET) but they are not enabled by default in
defconfig that's why enable all drivers for these SOCs including USB5744
on board USB hub available on Kria ZynqMP based SOMs and Carrier Cards.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/457c3a128e300241afd20da693d1d80a35d1ece6.1758099050.git.michal.simek@amd.com
These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using
custom "Tensix" cores for computation offload managed by
Linux running on SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree.
-----BEGIN PGP SIGNATURE-----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=3eAN
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
As usual, a number of newly added drivers get enabled in the arm64 defconfig,
in addition to minor housekeeping work on defconfig files for arm32, arm64 and
riscv.
-----BEGIN PGP SIGNATURE-----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=q9n2
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a number of newly added drivers get enabled in the arm64
defconfig, in addition to minor housekeeping work on defconfig files
for arm32, arm64 and riscv"
* tag 'soc-defconfig-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: enable Exynos ACPM clocks
arm64: defconfig: Remove the redundant SCHED_MC/SCHED_SMT
ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver
arm64: defconfig: enable i.MX AIPSTZ driver
ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm
arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe
arm64: defconfig: enable rockchip camera interface
ARM: tegra: Enable EXT4 for Tegra
arm64: defconfig: Enable NVIDIA VRS PSEQ RTC
arm64: defconfig: Enable SX150x GPIO expander driver
riscv: defconfig: enable SPI_FSL_QUADSPI as a module
ARM: at91: at91_dt_defconfig: set MMC_SPI to module
arm64: defconfig: Build NSS clock controller driver for IPQ5424
arm64: defconfig: Enable SCSI UFS Crypto and Block Inline encryption drivers
arm64: defconfig: Add M31 eUSB2 PHY config
arm64: defconfig: Enable configs for Fairphone 3, 4, 5 smartphones
arm64: defconfig: Enable two Novatek display panels for MTP8750 and Tianma
arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver
ARM: shmobile: defconfig: Refresh for v6.18-rc1
arm64: defconfig: Enable DW HDMI QP CEC support
...
API:
- Rewrite memcpy_sglist from scratch.
- Add on-stack AEAD request allocation.
- Fix partial block processing in ahash.
Algorithms:
- Remove ansi_cprng.
- Remove tcrypt tests for poly1305.
- Fix EINPROGRESS processing in authenc.
- Fix double-free in zstd.
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng.
- Add support for PCI device 0x115A to ccp.
- Add support of paes in caam.
- Add support for aes-xts in dthev2.
Others:
- Use likely in rhashtable lookup.
- Fix lockdep false-positive in padata by removing a helper.
-----BEGIN PGP SIGNATURE-----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=DHes
-----END PGP SIGNATURE-----
Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b checksums.
With this change, all btrfs checksum algorithms now have library
APIs. btrfs is planned to start just using the library directly.
This refactor also improves consistency between the BLAKE2b code and
BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by default.
The generic implementation of POLYVAL is greatly improved as well.
- Clean up the BLAKE2s code.
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaSurXBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK4RhAQC/ZWiFD8MAnyBSVEeo5G5wr835bGl0
FbXLdIT8orj/mAD+JgO9LaE15THL+Cy7K9VO4XN6HjbKd/7FdshYlrqrag8=
=qitH
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
Manivannan Sadhasivam