The supplies for PM6150L and PM8150L are the same, so they can be part
of one if-then block, for smaller code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230418071734.5706-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8550 is different than PM8550VE/VS, because the latter has much
smaller amount of supplies (l1-3 and s1-6) and regulators. The PM8550
has on the other hand one pin for vdd-l1-l4-l10 supplies. Correct the
if:then: clause with their supplies.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327080626.24200-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series introduces support for the Rockchip RK860X regulators,
while also providing a few fixes and improvements to the existing fan53555
driver.
RK8600/RK8601 are quite similar to the FAN53555 regulators.
RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used
in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU.
Add compatibles to support Rockchip RK860X regulators.
RK8600/RK8601 are pretty similar to the FAN53555 regulators, while
RK8602/RK8603 are a bit different, having a wider voltage selection
range.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230406194158.963352-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the compatible for the pmm8654au RPMH regulators present on the
sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230406192811.460888-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 71ca776a88 ("regulator: qcom-rpmh: Add pmc8180 and pmc8180c")
introduced these compatible's but the yaml conversion commit
7255f98d08 ("regulator: Convert RPMh regulator bindings to YAML")
seems to have dropped it
So bring it back!
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230325122444.249507-9-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commit b0de7fa706
("regulator: pca9450: Remove restrictions for regulator-name") to remove
the constraints on the regulator-name to allow using arbitrary and
descriptive names for the regulators.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230328060032.1983381-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317233616.3968003-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable yamllint to check the preferred commenting style of requiring a
space after a comment character '#'. Fix the cases in the tree which
have a warning with this enabled. Most cases just need a space after the
'#'. A couple of cases with comments which were not intended to be
comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and
brcm,bcmgenet.yaml.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230303214223.49451-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399
PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties
-----BEGIN PGP SIGNATURE-----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=ywsL
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
This has been a very quiet release for the regulator API, there's one
new driver for the Maxim MAX20411, some DT schema conversions and some
small tweaks and improvements but really nothing major at all.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPza80ACgkQJNaLcl1U
h9BJkAf7B/o0QVtyCyJSsoJ9QelMjq8Pbps5aEYlwhSnqZQtJnZEcX3NucJJuLBJ
IQ4K6XbDZtyODzRvB+Xy2/1QPEJC94oaxEN8Cw1rjolsJ8IL7NOa+h56gTRNouw+
7DlbAbM3EcmwiizZT74Hw4yqYkTUWsrN0K/O5ygs5sL/QfDV1LTnWTqoympoTgeN
UDk3B8VMmWmQ83i04oX/lZ28h9iKs8KVoB5rNRWHi0ypF/LMiADm1WWbhsou+vtO
uJp7UzTqQiIXkLBgKv2Oz0i4cFHNFnBDyTT8M8hL76xs/R94K1gTidSMoZremJ0F
RZX0UWHBK5fF24HIWKdzc+Iz57lgUA==
=FSkC
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release for the regulator API: there's one
new driver for the Maxim MAX20411, some DT schema conversions and some
small tweaks and improvements but really nothing major at all"
* tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (22 commits)
regulator: max597x: Align for simple_mfd_i2c driver
regulator: max20411: Fix off-by-one for n_voltages setting
regulator: max597x: Remove unused variable
regulator: tps65219: use generic set_bypass()
regulator: s5m8767: Bounds check id indexing into arrays
regulator: max77802: Bounds check regulator id against opmode
regulator: max20411: Convert to i2c's .probe_new()
regulator: scmi: Allow for zero voltage domains
regulator: max20411: Directly include bitfield.h
regulator: Introduce Maxim MAX20411 Step-Down converter
regulator: dt-bindings: Describe Maxim MAX20411
regulator: dt-bindings: qcom-labibb: Allow regulator-common properties
regulator: dt-bindings: fixed-regulator: allow gpios property
regulator: tps65219: use IS_ERR() to detect an error pointer
regulator: mcp16502: add enum MCP16502_REG_HPM description
regulator: fixed-helper: use the correct function name in comment
regulator: act8945a: fix non-kernel-doc comments
dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema
regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema
regulator: dt-bindings: qcom,usb-vbus-regulator: change node name
...
Merge series from Bjorn Andersson <quic_bjorande@quicinc.com>:
Introduce binding and driver for the Maxim MAX20411, and wire these up
on the Qualcomm SA8295P ADP.
Add binding for the Maxim MAX20411 step-down DC-DC converter.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230124184440.1421074-2-quic_bjorande@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow regulator-common properties on lab/ibb regulators, such as
regulator-always-on, etc.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230118181810.119922-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'gpios' is in general preferred even for single GPIO specifiers and
there are DTS boards using it (exynos4412-p4note.dtsi), so allow both
versions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120133010.299797-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The samsung,ext-control-gpios property was lost during conversion to DT
schema:
exynos3250-artik5-eval.dtb: pmic@66: regulators:LDO11: Unevaluated properties are not allowed ('samsung,ext-control-gpios' was unexpected)
Fixes: ea98b9eba0 ("regulator: dt-bindings: samsung,s2m: convert to dtschema")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120131447.289702-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the non-SMD Regulators bindings to dt-schema, the old text based
bindings will be deleted later since the RPM bindings are not yet converted.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v6-1-6c913908bb85@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Fairchild FAN53555 and compatible variants binding to DT
schema format.
Add the undocumented 'vsel-gpios' property used to control the VSEL pin.
The example was missing 'reg', so add it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230109004656.451231-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
usb-vbus-regulator is a better generic node name than dcdc to change the
example to match.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20221229191542.123367-1-luca@z3ntu.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop a parent node of the regulator as it is not directly necessary.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-5-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Create YAML bindings for the Active-semi PMICs and remove the old text
files.
The bindings aren't perfect, for instance I couldn't find good
descriptions for the vendor properties in the "charger" node of the
ACT8945A because I am not familiar with the hardware and these
properties were not documented anywhere.
The YAML schemas are a bit different than what is described in the old
text files, because these were sometimes wrong or had missing
information. This is the case for the ACT8600 documentation, which
specified the valid node names for the regulators, while the driver was
expecting different names. This led to the current situation where we
have two different boards using different names for the regulators:
- arch/mips/boot/dts/ingenic/ci20.dts uses the names documented in the
text file,
- arch/mips/boot/dts/ingenic/gcw0.dts uses the names that the driver
expects.
In theory, the driver should be fixed to follow the documentation, and
accept both naming schemes. In practice though, when the PMIC node was
added to the ci20.dts board file, the names were already wrong in
regards to what the driver expected, so it never really worked
correctly and wasn't tested properly. Furthermore, in that board the
consumers of the regulators aren't working for various other reasons
(invalid GPIOs, etc.).
For that reason, for the ACT8600 bindings I decided to only use the node
names that the driver expects (and that gcw0.dts uses), instead of
accepting both old and new names. A follow-up patch will update the CI20
board to use the new regulator names.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221214155152.14349-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
- New Functionality
- Add support for multiple devices of the same type; rk808
- Fix-ups
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
- Bug Fixes
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008
-----BEGIN PGP SIGNATURE-----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=HT19
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop beginning "Devicetree bindings" in various forms:
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [dD]evice[ -]\?[tT]ree [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [dD][tT] [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
DT Bindings:
- Various LED binding conversions and clean-ups. Convert the ir-spi-led,
pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently
reference LED common.yaml or multi-led schemas and disallow undefined
properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or were
missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61
-----BEGIN PGP SIGNATURE-----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=y/xu
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
Quite a quiet release for regulator, the diffstat is dominated by the
I2C migration to probe_new() and the newly added MT6357 driver. We've
just one framework addition and the rest is all new device support,
fixes and cleanups.
The framework addition is an API for requesting all regulators defined
in DT, this isn't great practice but has reasonable applications when
there is generic code handling devices on buses where the bus
specification doesn't include power. The immediate application is MDIO
but I believe there's others, it's another API that'll need an eye
keeping on it for undesirable usage.
- An API for requesting all regulators defined in DT.
- Conversion of lots of drivers to the I2C probe_new() API.
- Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and
Richtek RT6190.
There's a cross tree merge with the I2C tree in order to use the new
i2c_client_get_device_id() helper in the conversions to probe_new().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOXIIcACgkQJNaLcl1U
h9DW8Af/SkLjUIhuMYrln1QBKvJfMOzAIOo8LeCRCU6E8IxsDu/zccEva6dqr/M/
DFkq5VBCH7cX7VIvaHLjED/VdM0n+JG35tzwv83TVuAohLW/qsRdO6RE9IRBJcUd
7wUj2gjUBjjnCwbpI0hTygqQHvIxO0deQVYoQsxF8VwJTQ+ufpA3TJ3tmxqeWvbd
N/qkLohCk9NoFgiMjzBxBonacaZEvHkjUtqRthHm/nx8Mdu9NhBb6ai6KIpN7EJD
CaY+nUOx/cW8YJWBaZ32bcnvRgtanJGWn+p49/JmUCu0lIEOX2r7jds/kBo/hWWl
akGDUTcmvZY0CfrJfbx+FJxcA1A7Jg==
=Dmpg
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a quiet release for regulator, the diffstat is dominated by the
I2C migration to probe_new() and the newly added MT6357 driver. We've
just one framework addition and the rest is all new device support,
fixes and cleanups.
The framework addition is an API for requesting all regulators defined
in DT, this isn't great practice but has reasonable applications when
there is generic code handling devices on buses where the bus
specification doesn't include power. The immediate application is MDIO
but I believe there's others, it's another API that'll need an eye
keeping on it for undesirable usage.
Summary:
- An API for requesting all regulators defined in DT
- Conversion of lots of drivers to the I2C probe_new() API
- Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek
RT6190"
* tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits)
regulator: core: Use different devices for resource allocation and DT lookup
dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
regulator: add mt6357 regulator
regulator: dt-bindings: Add binding schema for mt6357 regulators
regulator: core: fix resource leak in regulator_register()
regulator: core: fix module refcount leak in set_supply()
regulator: core: fix use_count leakage when handling boot-on
regulator: rk808: Use dev_err_probe
regulator: rk808: reduce 'struct rk808' usage
regulator: Drop obsolete dependencies on COMPILE_TEST
regulator: pv88080-regulator: Convert to i2c's .probe_new()
regulator: pfuze100-regulator: Convert to i2c's .probe_new()
regulator: isl6271a-regulator: Convert to i2c's .probe_new()
regulator: fan53555: Convert to i2c's .probe_new()
regulator: act8865-regulator: Convert to i2c's .probe_new()
regulator: qcom-rpmh: Add support for PM8550 regulators
regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550
regulator: tps65023-regulator: Convert to i2c's .probe_new()
regulator: tps62360-regulator: Convert to i2c's .probe_new()
...
Several regulator schemas are missing 'unevaluatedProperties' constraint
which means any extra properties are allowed. Upon adding the
constraint, there's numerous warnings from using the deprecated
'regulator-compatible' property. Remove the usage as examples shouldn't
be using long since deprecated properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221206211554.92005-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The email backend used by ROHM keeps labeling patches as spam. This can
result to missing the patches.
Switch my mail address from a company mail to a personal one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/7986d30480df6179a3989fba4cd13817738635c5.1669877740.git.mazziesaccount@gmail.com
json-schema patterns by default will match anywhere in a string, so
typically we want at least the start or end anchored. Fix the obvious
cases where the anchors were forgotten.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221118223728.1721589-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Fixed string node names should be under 'properties' rather than
'patternProperties'. Additionally, without beginning and end of line
anchors, any prefix or suffix is allowed on the specified node name.
These cases don't appear to want a prefix or suffix, so move them under
'properties'.
In some cases, the diff turns out to look like we're moving some
patterns rather than the fixed string properties.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221118223708.1721134-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Remove a line break and increase indentation of the continuation line
to avoid having the 'regulator-allowed-modes' example be reproduced
verbatim with four-spaces indentation (instead of a tab, which is still
too little) in devicetree sources.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
PMR735a also appears to be bundled with some SMD RPM SoCs.
Document it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221109110846.45789-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zev Weiss <zev@bewilderbeest.net>:
This series adds support for userspace-controlled regulator-supplied
power outputs [2]. This is an important feature for some kinds of BMC
(baseboard management controller) systems where the BMC provides an
operator with manual control of a set of DC power outputs.
As in a broadly similar patchset that was recently almost merged [0],
this takes the approach of providing support by extending the existing
userspace-consumer regulator driver. A couple questions about the
userspace-consumer driver came up along the way, however.
First, how (if at all) is it currently being used? It appears the
last in-tree use of it was removed a bit over two years ago in commit
9d3239147d ("ARM: pxa: remove Compulab pxa2xx boards"). Aside from
just adding DT support I've made a couple small tweaks to the driver
in patch 3 that I hope are compatible with any current usage, but
without any extant examples to look at it's kind of hard to say.
Second, how critical is its support for controlling multiple
regulators? (i.e. its use of regulator_bulk_data and friends instead
of a single struct regulator.) As far as I can see every in-tree use
of it that's ever existed has used num_supplies = 1. If it's not
important to retain, patch 1 of this series could be supplanted by one
that instead simplifies the driver slightly by removing that
functionality.
The DT binding added in patch 2 is essentially identical to one I
posted in a previous patchset that had an R-B from Rob [1], but has
had some minor rewording and been moved from the extcon subsystem to
the regulator subsystem.
This describes a power output supplied by a regulator, such as a
power outlet on a power distribution unit (PDU).
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221031233704.22575-3-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Various properties in the cros-ec binding only apply to different
compatible strings. For example, the interrupts and reg property are
required for all cros-ec devices except for the rpmsg version. Add some
conditions to update the availability of properties so that they can't
be used with compatibles that don't support them.
This reveals that many of the examples in bindings that use cros-ec were
missing the interrupts property. Add the property to make those bindings
whole again.
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <devicetree@vger.kernel.org>
Cc: <chrome-platform@lists.linux.dev>
Cc: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Craig Hesling <hesling@chromium.org>
Cc: Tom Hughes <tomhughes@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221026003641.2688765-2-swboyd@chromium.org
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmM7QzsACgkQ+vtdtY28
YcNMgg//eZr/y+FUyF3tE7DRRmCzbptAfRG0Ccmj6z0VM9HNmOiacnNdqGjOFHj6
CCFUHYsFJhiTwgM5MzMMZcQetrF+dZDok5HQNAkYqz5jtdcg1T0ZgrcpHcZpxfGv
lpAFaDkyoWQ7BXJbgLJJFP6pZ4IDyekWjU49php5pYlmTvzLwMvYW2MYvElLJ4It
tKi0XAzVyT/TrynFAOYDVO+kwZ4DDctsJM44K0LRW0e05Den9zCZDeVXik0J9l8o
jMpVy5xgqAbNUe/TCj8n91nG/Cl3wiW8l8JGWPAcb3D1Em6CQlsJCGN1a/rSHUiE
Pseql1ufUzpjcpTMnmdbRE/jWwJcLI2DqandxqIrEpUFmF4hlGeSviKib9qtacN0
pWC5pZgxrWvM9rHbbe2cYLozkYd8eiRo2l8hfefTopYbQ3UHa2hsU+f6vm9t0Gru
vxH7BmdlI22aGlnP0jl8t84v5cpu8O4C6Zmf2B/b5xj3Tif2GTLU1aYPuX3PkqHL
F9Ni+JqhnQBl1+t90PJogEFicjeyrjUO9lkKbzuoWwiJk5AgJcGck8tkBotlWYPc
B59DTigELMlssYIoF4/oX8ZF1QVmws6Xc0f9/GkgCEA0bR1qdo63qPjM9FIpd1G4
9sUhxiQbPCtIMMwD1M26LGUE/C4WESL9VXjdakoMaj7ekon2vjw=
=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
The core work this time around has mostly been around the code to manage
regulator modes, simplifying the interface for configuring modes to not
take account of the voltage and as a side effect resolving a
bootstrapping issue on systems where we can't read the voltage from the
regulator. Otherwise it's been quite a quiet release with some new
drivers and a devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load configuration.
- devm helper for a combined get and enable operation.
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM61ZQACgkQJNaLcl1U
h9BGggf+MraXhaTOSrLCzKYjcsjIZ2OCzySoKPdh9PdvnKc2PX+vIi6SYjq6zeAe
OlwDvKzW+bR6VRTStSskK5wRXrLn/9eo25GhZyl4BpAR+vjGBtzlNagk3gGTBKMj
ua/kb16FV+15Zg5L1qO35ka9BuCzs2Bfz9OoZKy4vtuqVqazmrU3PS8nr/kAlW9R
fi7a50Ybc+W7xBYUNuaKqdFQWlblLh/UKqImV9dANokXZDD9deJ8BeWq/FttNY6T
lyTJGDuKYhcvb7wx8QdzcSCoLsdVPRi0cmIlbjiusWogyvJBQVhto338Y8+b7vIJ
29tlD54gmWXSxwf0e8CpHKh/BxwbAw==
=YFsi
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The core work this time around has mostly been around the code to
manage regulator modes, simplifying the interface for configuring
modes to not take account of the voltage and as a side effect
resolving a bootstrapping issue on systems where we can't read the
voltage from the regulator.
Otherwise it's been quite a quiet release with some new drivers and a
devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load
configuration
- devm helper for a combined get and enable operation
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219"
* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
dt-bindings: gpio-regulator: add vin-supply property support
regulator: gpio: Add input_supply support in gpio_regulator_config
regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
regulator: qcom,rpmh: add pm660 and pm660l pmics
regulator: qcom-rpmh: add pm660 and pm660l pmics
regulator: of: Fix kernel-doc
regulator: of: Fix kernel-doc
regulator: Add driver for MT6332 PMIC regulators
regulator: Add bindings for MT6332 regulator
regulator: Add driver for MT6331 PMIC regulators
regulator: Add bindings for MT6331 regulator
regulator: tps65219: Fix .bypass_val_on setting
regulator: qcom_rpm: Fix circular deferral regression
regulator: core: Prevent integer underflow
regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
regulator: bd9576: switch to using devm_fwnode_gpiod_get()
regulator: bd71815: switch to using devm_fwnode_gpiod_get()
regulator: core: Fix regulator supply registration with sysfs
regulator: tps65219: change tps65219_regulator_irq_types to static
regulator: core: Don't err if allow-set-load but no allowed-modes
...
This is same scheme as fixed-regulator.
Without that property used, the parent regulator can be shut down (if not an always on).
Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220929132526.29427-3-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDM670 uses RPMh for managing the PM660 and PM660L. Document RPMh
support for the PMIC.
Link: 58064f13c0%5E%21/#F0
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920223331.150635-2-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.
This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.
Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.
Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.
Add devicetree bindings for the regulators found in the MT6332 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220913123456.384513-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds