- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the lower
bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as that
must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems years
ago, but that missed - or did not envision - the zero IO/APIC case.
Consolidate the zero check and return the provided "from" argument to the
core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU in a
cluster must allocate a new cluster CPU mask. As this happens during the
early startup of a CPU, where memory allocations cannot be done, the
mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and if
the to be brought up CPU is the first in a cluster the CPU takes over
this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which is
used today, but would fail completely for parallel bringup of CPUs.
The cluster association of a CPU can be computed from the APIC ID which
is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront and
the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux CPU
number. The CPU number allows it to retrieve the rest of the required
data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs provide
a new variable smpboot_control which contains the Linux CPU number for
now. The starting CPU can retrieve and compute all required information
for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via the
APIC ID, when smpboot_control has the corresponding control bit set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor because
confidental computing platforms need special treatment in the early
startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to late
discoveries of fundamental issue with those patches these commits never
happened.
The merge commit is unfortunately in the middle of the APIC commits so
unraveling it would have required a rebase or revert. As the parallel
bringup seems to be well on its way for 6.5 this would be just pointless
churn. As the commit does not contain any functional change it's not a
risk to keep it.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmRGuAwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoRzSEADEx1sVkd2yrLcTYdpjdKbbUaDJ6lR0
DXxIP3+ApGHmV9l9yIh+/5C2oEJsiUfFf1vdh6ajv5iXpksCKzcUzkW5g3w7nM36
CSpULpFjwvaq8TIo0o1PIhAbo/yIMMzJVDs8R0reCnWgGAWZoW/a9Ndcvcicd0an
pQAlkw3FD5r92mcMlKPNWFoui1AkScGEV02zJ7884MAukmBZwD8Jd+gE6eQC9GKa
9hyJiB77st1URl+a0cPsPYvv8RLVuVcljWsh2edyvxgovIO56+BoEjbrgRSF6cqQ
Bhzo//3KgbUJ1y+YqH01aKZzY0hRpbAi2Rew4RBKcBKwCGd2qltUQG0LFNxAtV83
RsC573wSCGSCGO5Xb1RVXih5is+9YqMqitJNWvEc15jjOA9nwoLc80axP11v42f9
Xl4iGHQTWVGdxT4H22NH7UCuRlGg38vAx+In2HGpN/e57q2ighESjiGuqQAQpLel
pbOeJtQ/D2xXVKcCap4T/P/2x5ls7bsc76MWJBMcYC3pRgJ5M7ZHw7wTw0IAty4x
xCfR1bsRVEAhrE9r/odgNipXjBJu+CdGBAupNEIiRyq1QiwUKtMTayasRGUlbYO6
vrieHKqoflzRVg2M9Bgm3oI28X27FzZHWAZJW2oJ2Wnn2jL5kuRJa1nEykqo8pEP
j6rjnScRVvdpIw==
=IQWG
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the
lower bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as
that must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer
interrupt on x86. The return value is unchecked in the core code, so
it ends up to allocate interrupt number 0 which is subsequently
considered to be invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems
years ago, but that missed - or did not envision - the zero IO/APIC
case.
Consolidate the zero check and return the provided "from" argument to
the core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU
in a cluster must allocate a new cluster CPU mask. As this happens
during the early startup of a CPU, where memory allocations cannot be
done, the mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and
if the to be brought up CPU is the first in a cluster the CPU takes
over this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which
is used today, but would fail completely for parallel bringup of
CPUs.
The cluster association of a CPU can be computed from the APIC ID
which is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront
and the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux
CPU number. The CPU number allows it to retrieve the rest of the
required data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs
provide a new variable smpboot_control which contains the Linux CPU
number for now. The starting CPU can retrieve and compute all
required information for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via
the APIC ID, when smpboot_control has the corresponding control bit
set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor
because confidental computing platforms need special treatment in the
early startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to
late discoveries of fundamental issue with those patches these
commits never happened.
The merge commit is unfortunately in the middle of the APIC commits
so unraveling it would have required a rebase or revert. As the
parallel bringup seems to be well on its way for 6.5 this would be
just pointless churn. As the commit does not contain any functional
change it's not a risk to keep it.
* tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
x86/coco: Export cc_vendor
x86/smpboot: Reference count on smpboot_setup_warm_reset_vector()
x86/smpboot: Remove initial_gs
x86/smpboot: Remove early_gdt_descr on 64-bit
x86/smpboot: Remove initial_stack on 64-bit
x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel
arch_dynirq_lower_bound() is invoked by the core interrupt code to
retrieve the lowest possible Linux interrupt number for dynamically
allocated interrupts like MSI.
The x86 implementation uses this to exclude the IO/APIC GSI space.
This works correctly as long as there is an IO/APIC registered, but
returns 0 if not. This has been observed in VMs where the BIOS does
not advertise an IO/APIC.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
The function has already a check for 0 in the case that an IO/APIC is
registered, as ioapic_dynirq_base is 0 in case of device tree setups.
Consolidate this and zero check for both ioapic_dynirq_base and gsi_top,
which is used in the case that no IO/APIC is registered.
Fixes: 3e5bedc2c2 ("x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1679988604-20308-1-git-send-email-ssengar@linux.microsoft.com
The detection of atomic update failure in reserve_eilvt_offset() is
not correct. The value returned by atomic_cmpxchg() should be compared
to the old value from the location to be updated.
If these two are the same, then atomic update succeeded and
"eilvt_offsets[offset]" location is updated to "new" in an atomic way.
Otherwise, the atomic update failed and it should be retried with the
value from "eilvt_offsets[offset]" - exactly what atomic_try_cmpxchg()
does in a correct and more optimal way.
Fixes: a68c439b19 ("apic, x86: Check if EILVT APIC registers are available (AMD only)")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227160917.107820-1-ubizjak@gmail.com
Current code always maps MMIO devices as shared (decrypted) in a
confidential computing VM. But Hyper-V guest VMs on AMD SEV-SNP with vTOM
use a paravisor running in VMPL0 to emulate some devices, such as the
IO-APIC and TPM. In such a case, the device must be accessed as private
(encrypted) because the paravisor emulates the device at an address below
vTOM, where all accesses are encrypted.
Add a new hypervisor callback to determine if an MMIO address should
be mapped private. The callback allows hypervisor-specific code to handle
any quirks, the use of a paravisor, etc. in determining whether a mapping
must be private. If the callback is not used by a hypervisor, default
to returning "false", which is consistent with normal coco VM behavior.
Use this callback as another special case to check for when doing
ioremap(). Just checking the starting address is sufficient as an
ioremap range must be all private or all shared.
Also make the callback in early boot IO-APIC mapping code that uses the
fixmap.
[ bp: Touchups. ]
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1678329614-3482-2-git-send-email-mikelley@microsoft.com
Each of the sibling CPUs in a cluster uses the same clustermask. The first
CPU in a cluster will need a new clustermask allocated, while subsequent
siblings will use the same clustermask as the first.
However, the CPU being brought up cannot yet perform memory allocations
at the point that this occurs in init_x2apic_ldr().
So at present, the alloc_clustermask() function allocates a clustermask
just in case it's needed, storing it in the global cluster_hotplug_mask.
A CPU which is the first sibling of a cluster will "take" it from there
and set cluster_hotplug_mask to NULL, in order for alloc_clustermask()
to allocate a new one before bringing up the next CPU.
To facilitate parallel bringup of CPUs in future, switch to a model
where alloc_clustermask() prepopulates the clustermask in the per_cpu
data for each present CPU in the cluster in advance. All that the CPU
needs to do for itself in init_x2apic_ldr() is set its own bit in that
mask.
The 'node' and 'clusterid' members of struct cluster_mask are thus
redundant, and it can become a simple struct cpumask instead.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20230316222109.1940300-2-usama.arif@bytedance.com
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-13-johan+linaro@kernel.org
- Handle the case where x2APIC is enabled and locked by the BIOS on a
kernel with CONFIG_X86_X2APIC=n gracefully. Instead of a panic which
does not make it to the graphical console during very early boot,
simply disable the local APIC completely and boot with the PIC and very
limited functionality, which allows to diagnose the issue.
- Convert x86 APIC device tree bindings to YAML
- Extend x86 APIC device tree bindings to configure interrupt delivery
mode and handle this in during init. This allows to boot with device
tree on platforms which lack a legacy PIC.
-----BEGIN PGP SIGNATURE-----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=dpZx
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic update from Thomas Gleixner:
"A set of changes for the x86 APIC code:
- Handle the case where x2APIC is enabled and locked by the BIOS on a
kernel with CONFIG_X86_X2APIC=n gracefully.
Instead of a panic which does not make it to the graphical console
during very early boot, simply disable the local APIC completely
and boot with the PIC and very limited functionality, which allows
to diagnose the issue
- Convert x86 APIC device tree bindings to YAML
- Extend x86 APIC device tree bindings to configure interrupt
delivery mode and handle this in during init. This allows to boot
with device tree on platforms which lack a legacy PIC"
* tag 'x86-apic-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/of: Add support for boot time interrupt delivery mode configuration
x86/of: Replace printk(KERN_LVL) with pr_lvl()
dt-bindings: x86: apic: Introduce new optional bool property for lapic
dt-bindings: x86: apic: Convert Intel's APIC bindings to YAML schema
x86/of: Remove unused early_init_dt_add_memory_arch()
x86/apic: Handle no CONFIG_X86_X2APIC on systems with x2APIC enabled by BIOS
Enable IMS in the domain init and allocation mapping code, but do not
enable it on the vector domain as discussed in various threads on LKML.
The interrupt remap domains can expand this setting like they do with
PCI multi MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232327.022658817@linutronix.de
and related code which is not longer required now that the interrupt remap
code has been converted to MSI parent domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.267353814@linutronix.de
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.209212272@linutronix.de
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.151226317@linutronix.de
Enable MSI parent domain support in the x86 vector domain and fixup the
checks in the iommu implementations to check whether device::msi::domain is
the default MSI parent domain. That keeps the existing logic to protect
e.g. devices behind VMD working.
The interrupt remap PCI/MSI code still works because the underlying vector
domain still provides the same functionality.
None of the other x86 PCI/MSI, e.g. XEN and HyperV, implementations are
affected either. They still work the same way both at the low level and the
PCI/MSI implementations they provide.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.034672592@linutronix.de
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
A kernel that was compiled without CONFIG_X86_X2APIC was unable to boot on
platforms that have x2APIC already enabled in the BIOS before starting the
kernel.
The kernel was supposed to panic with an approprite error message in
validate_x2apic() due to the missing X2APIC support.
However, validate_x2apic() was run too late in the boot cycle, and the
kernel tried to initialize the APIC nonetheless. This resulted in an
earlier panic in setup_local_APIC() because the APIC was not registered.
In my experiments, a panic message in setup_local_APIC() was not visible
in the graphical console, which resulted in a hang with no indication
what has gone wrong.
Instead of calling panic(), disable the APIC, which results in a somewhat
working system with the PIC only (and no SMP). This way the user is able to
diagnose the problem more easily.
Disabling X2APIC mode is not an option because it's impossible on systems
with locked x2APIC.
The proper place to disable the APIC in this case is in check_x2apic(),
which is called early from setup_arch(). Doing this in
__apic_intr_mode_select() is too late.
Make check_x2apic() unconditionally available and remove the empty stub.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Robert Elliott (Servers) <elliott@hpe.com>
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/d573ba1c-0dc4-3016-712a-cc23a8a33d42@molgen.mpg.de
Link: https://lore.kernel.org/lkml/20220911084711.13694-3-mat.jonczyk@o2.pl
Link: https://lore.kernel.org/all/20221129215008.7247-1-mat.jonczyk@o2.pl
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.
Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
The APIC supports two modes, legacy APIC (or xAPIC), and Extended APIC
(or x2APIC). X2APIC mode is mostly compatible with legacy APIC, but
it disables the memory-mapped APIC interface in favor of one that uses
MSRs. The APIC mode is controlled by the EXT bit in the APIC MSR.
The MMIO/xAPIC interface has some problems, most notably the APIC LEAK
[1]. This bug allows an attacker to use the APIC MMIO interface to
extract data from the SGX enclave.
Introduce support for a new feature that will allow the BIOS to lock
the APIC in x2APIC mode. If the APIC is locked in x2APIC mode and the
kernel tries to disable the APIC or revert to legacy APIC mode a GP
fault will occur.
Introduce support for a new MSR (IA32_XAPIC_DISABLE_STATUS) and handle
the new locked mode when the LEGACY_XAPIC_DISABLED bit is set by
preventing the kernel from trying to disable the x2APIC.
On platforms with the IA32_XAPIC_DISABLE_STATUS MSR, if SGX or TDX are
enabled the LEGACY_XAPIC_DISABLED will be set by the BIOS. If
legacy APIC is required, then it SGX and TDX need to be disabled in the
BIOS.
[1]: https://aepicleak.com/aepicleak.pdf
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Link: https://lkml.kernel.org/r/20220816231943.1152579-1-daniel.sneddon@linux.intel.com
fatfs, autofs, squashfs, procfs, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
kwS/13j38guulSlXRzDLmitbg81zAAI=
=Zfum
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
The setup_profiling_timer() is mostly un-implemented by many
architectures. In many places it isn't guarded by CONFIG_PROFILE which is
needed for it to be used. Make it a weak symbol in kernel/profile.c and
remove the 'return -EINVAL' implementations from the kenrel.
There are a couple of architectures which do return 0 from the
setup_profiling_timer() function but they don't seem to do anything else
with it. To keep the /proc compatibility for now, leave these for a
future update or removal.
On ARM, this fixes the following sparse warning:
arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Remove function export
- Correct asm constraint
- Fix __setup handlers retval
-----BEGIN PGP SIGNATURE-----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=/WGB
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"A variety of fixes which don't fit any other tip bucket:
- Remove unnecessary function export
- Correct asm constraint
- Fix __setup handlers retval"
* tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
x86: Fix return value of __setup handlers
x86/delay: Fix the wrong asm constraint in delay_loop()
x86/amd_nb: Unexport amd_cache_northbridges()
allocated and are present when later accessed ("nosmp" and x2APIC)
- Clarify the bit overlap between an old APIC and a modern, integrated one
-----BEGIN PGP SIGNATURE-----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=fkbm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Borislav Petkov:
- Always do default APIC routing setup so that cpumasks are properly
allocated and are present when later accessed ("nosmp" and x2APIC)
- Clarify the bit overlap between an old APIC and a modern, integrated
one
* tag 'x86_apic_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Do apic driver probe for "nosmp" use case
x86/apic: Clarify i82489DX bit overlap in APIC_LVT0
-----BEGIN PGP SIGNATURE-----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=s0mT
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Borislav Petkov:
- A couple of changes enabling SGI UV5 support
* tag 'x86_platform_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Log gap hole end size
x86/platform/uv: Update TSC sync state for UV5
x86/platform/uv: Update NMI Handler for UV5
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled. A return
of 0 causes the boot option/value to be listed as an Unknown kernel
parameter and added to init's (limited) argument (no '=') or environment
(with '=') strings. So return 1 from these x86 __setup handlers.
Examples:
Unknown kernel command line parameters "apicpmtimer
BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
apicpmtimer
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc8
vdso=1
ring3mwait=disable
Fixes: 2aae950b21 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Fixes: 77b52b4c5c ("x86: add "debugpat" boot option")
Fixes: e16fd002af ("x86/cpufeature: Enable RING3MWAIT for Knights Landing")
Fixes: b8ce335906 ("x86_64: convert to clock events")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org
For the "nosmp" use case, the APIC initialization code selects
"APIC_SYMMETRIC_IO_NO_ROUTING" as the default interrupt mode and avoids
probing APIC drivers.
This works well for the default APIC modes, but for the x2APIC case the
probe function is required to allocate the cluster_hotplug mask. So in the
APIC_SYMMETRIC_IO_NO_ROUTING case when the x2APIC is initialized it
dereferences a NULL pointer and the kernel crashes.
This was observed on a TDX platform where x2APIC is enabled and "nosmp"
command line option is allowed.
To fix this issue, probe APIC drivers via default_setup_apic_routing() for
the APIC_SYMMETRIC_IO_NO_ROUTING interrupt mode too.
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/a64f864e1114bcd63593286aaf61142cfce384ea.1650076869.git.sathyanarayanan.kuppuswamy@intel.com
Daniel stumbled over the bit overlap of the i82498DX external APIC and the
TSC deadline timer configuration bit in modern APICs, which is neither
documented in the code nor in the current SDM. Maciej provided links to
the original i82489DX/486 documentation. See Link.
Remove the i82489DX macro maze, use a i82489DX specific define in the apic
code and document the overlap in a comment.
Reported-by: Daniel Vacek <neelx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/87ee22f3ci.ffs@tglx
The kernel interacts with each bare-metal IOAPIC with a special
MMIO page. When running under KVM, the guest's IOAPICs are
emulated by KVM.
When running as a TDX guest, the guest needs to mark each IOAPIC
mapping as "shared" with the host. This ensures that TDX private
protections are not applied to the page, which allows the TDX host
emulation to work.
ioremap()-created mappings such as virtio will be marked as
shared by default. However, the IOAPIC code does not use ioremap() and
instead uses the fixmap mechanism.
Introduce a special fixmap helper just for the IOAPIC code. Ensure
that it marks IOAPIC pages as "shared". This replaces
set_fixmap_nocache() with __set_fixmap() since __set_fixmap()
allows custom 'prot' values.
AMD SEV gets IOAPIC pages shared because FIXMAP_PAGE_NOCACHE has _ENC
bit clear. TDX has to set bit to share the page with the host.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-29-kirill.shutemov@linux.intel.com
Secondary CPU startup is currently performed with something called
the "INIT/SIPI protocol". This protocol requires assistance from
VMMs to boot guests. As should be a familiar story by now, that
support can not be provded to TDX guests because TDX VMMs are
not trusted by guests.
To remedy this situation a new[1] "Multiprocessor Wakeup Structure"
has been added to to an existing ACPI table (MADT). This structure
provides the physical address of a "mailbox". A write to the mailbox
then steers the secondary CPU to the boot code.
Add ACPI MADT wake structure parsing support and wake support. Use
this support to wake CPUs whenever it is present instead of INIT/SIPI.
While this structure can theoretically be used on 32-bit kernels,
there are no 32-bit TDX guest kernels. It has not been tested and
can not practically *be* tested on 32-bit. Make it 64-bit only.
1. Details about the new structure can be found in ACPI v6.4, in the
"Multiprocessor Wakeup Structure" section.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-22-kirill.shutemov@linux.intel.com
Show value of gap end in the kernel log which equates to number of physical
address bits used by system.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220406195149.228164-4-steve.wahl@hpe.com
The UV5 platform synchronizes the TSCs among all chassis, and will not
proceed to OS boot without achieving synchronization. Previous UV
platforms provided a register indicating successful synchronization.
This is no longer available on UV5. On this platform TSC_ADJUST
should not be reset by the kernel.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220406195149.228164-3-steve.wahl@hpe.com
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
A couple of kernel functions call for_each_*_bit_from() with start
bit equal to 0. Replace them with for_each_*_bit().
No functional changes, but might improve on readability.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
instead of fiddling with MSI descriptors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221813.372357371@linutronix.de
Make arch_restore_msi_irqs() return a boolean which indicates whether the
core code should restore the MSI message or not. Get rid of the indirection
in x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI
Link: https://lore.kernel.org/r/20211206210224.485668098@linutronix.de
The unnamed struct sucks and is in the way of further cleanups. Stick the
PCI related MSI data into a real data structure and cleanup all users.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211206210224.374863119@linutronix.de
Using per-cpu storage for @x86_cpu_to_logical_apicid is not optimal.
Broadcast IPI will need at least one cache line per cpu to access this
field.
__x2apic_send_IPI_mask() is using standard bitmask operators.
By converting x86_cpu_to_logical_apicid to an array, we divide by 16x
number of needed cache lines, because we find 16 values per cache
line. CPU prefetcher can kick nicely.
Also move @cluster_masks to READ_MOSTLY section to avoid false sharing.
Tested on a dual socket host with 256 cpus, cost for a full broadcast
is now 11 usec instead of 33 usec.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211007143556.574911-1-eric.dumazet@gmail.com
which can be found on various ALi chipsets and is also available on older
Intel systems which expose a PIRQ router. While the Intel support is more
or less nostalgia, the ALi chips are still in use on popular embedded
boards used for routers.
-----BEGIN PGP SIGNATURE-----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=R+c1
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PIRQ updates from Thomas Gleixner:
"A set of updates to support port 0x22/0x23 based PCI configuration
space which can be found on various ALi chipsets and is also available
on older Intel systems which expose a PIRQ router.
While the Intel support is more or less nostalgia, the ALi chips are
still in use on popular embedded boards used for routers"
* tag 'x86-irq-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix typo s/ECLR/ELCR/ for the PIC register
x86: Avoid magic number with ELCR register accesses
x86/PCI: Add support for the Intel 82426EX PIRQ router
x86/PCI: Add support for the Intel 82374EB/82374SB (ESC) PIRQ router
x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router
x86: Add support for 0x22/0x23 port I/O configuration space
Define PIC_ELCR1 and PIC_ELCR2 macros for accesses to the ELCR registers
implemented by many chipsets in their embedded 8259A PIC cores, avoiding
magic numbers that are difficult to handle, and complementing the macros
we already have for registers originally defined with discrete 8259A PIC
implementations. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200237300.9461@angie.orcam.me.uk
Define macros and accessors for the configuration space addressed
indirectly with an index register and a data register at the port I/O
locations of 0x22 and 0x23 respectively.
This space is defined by the Intel MultiProcessor Specification for the
IMCR register used to switch between the PIC and the APIC mode[1], by
Cyrix processors for their configuration[2][3], and also some chipsets.
Given the lack of atomicity with the indirect addressing a spinlock is
required to protect accesses, although for Cyrix processors it is enough
if accesses are executed with interrupts locally disabled, because the
registers are local to the accessing CPU, and IMCR is only ever poked at
by the BSP and early enough for interrupts not to have been configured
yet. Therefore existing code does not have to change or use the new
spinlock and neither it does.
Put the spinlock in a library file then, so that it does not get pulled
unnecessarily for configurations that do not refer it.
Convert Cyrix accessors to wrappers so as to retain the brevity and
clarity of the `getCx86' and `setCx86' calls.
References:
[1] "MultiProcessor Specification", Version 1.4, Intel Corporation,
Order Number: 242016-006, May 1997, Section 3.6.2.1 "PIC Mode", pp.
3-7, 3-8
[2] "5x86 Microprocessor", Cyrix Corporation, Order Number: 94192-00,
July 1995, Section 2.3.2.4 "Configuration Registers", p. 2-23
[3] "6x86 Processor", Cyrix Corporation, Order Number: 94175-01, March
1996, Section 2.4.4 "6x86 Configuration Registers", p. 2-23
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107182353140.9461@angie.orcam.me.uk
The X86 MSI mechanism cannot handle interrupt affinity changes safely after
startup other than from an interrupt handler, unless interrupt remapping is
enabled. The startup sequence in the generic interrupt code violates that
assumption.
Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
While the interrupt remapping MSI chip does not require this, there is no
point in treating it differently as this might spare an interrupt to a CPU
which is not in the default affinity mask.
For the non-remapping case go to the direct write path when the interrupt
is not yet started similar to the not yet activated case.
Fixes: 1840475676 ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.886722080@linutronix.de
The IO/APIC cannot handle interrupt affinity changes safely after startup
other than from an interrupt handler. The startup sequence in the generic
interrupt code violates that assumption.
Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
Fixes: 1840475676 ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.832143400@linutronix.de
PIC interrupts do not support affinity setting and they can end up on
any online CPU. Therefore, it's required to mark the associated vectors
as system-wide reserved. Otherwise, the corresponding irq descriptors
are copied to the secondary CPUs but the vectors are not marked as
assigned or reserved. This works correctly for the IO/APIC case.
When the IO/APIC is disabled via config, kernel command line or lack of
enumeration then all legacy interrupts are routed through the PIC, but
nothing marks them as system-wide reserved vectors.
As a consequence, a subsequent allocation on a secondary CPU can result in
allocating one of these vectors, which triggers the BUG() in
apic_update_vector() because the interrupt descriptor slot is not empty.
Imran tried to work around that by marking those interrupts as allocated
when a CPU comes online. But that's wrong in case that the IO/APIC is
available and one of the legacy interrupts, e.g. IRQ0, has been switched to
PIC mode because then marking them as allocated will fail as they are
already marked as system vectors.
Stay consistent and update the legacy vectors after attempting IO/APIC
initialization and mark them as system vectors in case that no IO/APIC is
available.
Fixes: 69cde0004a ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com
accidental allocation attempt for IRQ2.
-----BEGIN PGP SIGNATURE-----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=0w/x
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic update from Thomas Gleixner:
"A single commit to make the vector allocation code more resilent
against an accidental allocation attempt for IRQ2"
* tag 'x86-apic-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vector: Add a sanity check to prevent IRQ2 allocations
-----BEGIN PGP SIGNATURE-----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=nDvE
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Borislav Petkov:
"A bunch of SGI UV improvements, fixes and cleanups"
* tag 'x86_platform_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Remove dead !CONFIG_KEXEC_CORE code
x86/platform/uv: Fix !KEXEC build failure
x86/platform/uv: Add more to secondary CPU kdump info
x86/platform/uv: Use x2apic enabled bit as set by BIOS to indicate APIC mode
x86/platform/uv: Set section block size for hubless architectures
x86/platform/uv: Fix indentation warning in Documentation/ABI/testing/sysfs-firmware-sgi_uv
To prevent another incidental removal of the IRQ2 ignore logic in the
IO/APIC code going unnoticed add a sanity check. Add some commentry at the
other place which ignores IRQ2 while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210318192819.795280387@linutronix.de
Architectures that describe the CPU topology in devicetree and do not have
an identity mapping between physical and logical CPU ids must override the
default implementation of arch_match_cpu_phys_id().
Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node()
and of_cpu_device_node_get() which several drivers rely on. It also causes
the CPU struct devices exported through sysfs to point to the wrong
devicetree nodes.
On x86, CPUs are described in devicetree using their APIC ids and those
do not generally coincide with the logical ids, even if CPU0 typically
uses APIC id 0.
Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node
lookups work also with SMP.
Apart from fixing the broken sysfs devicetree-node links this likely does
not affect current users of mainline kernels on x86.
Fixes: 4e07db9c8d ("x86/devicetree: Use CPU description from Device Tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org
Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.
The underlying issue is that IRQ2 for various reasons (see commit
af174783b9 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:
[ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU
There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.
For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.
Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.
Fixes: d32932d02e ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Commit
bbbd2b51a2 ("x86/platform/UV: Use new set memory block size function")
added a call to set the block size value that is needed by the kernel
to set the boundaries in the section list. This was done for UV Hubbed
systems but missed in the UV Hubless setup. Fix that mistake by adding
that same set call for hubless systems, which support the same NVRAMs
and Intel BIOS, thus the same problem occurs.
[ bp: Massage commit message. ]
Fixes: bbbd2b51a2 ("x86/platform/UV: Use new set memory block size function")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20210305162853.299892-1-mike.travis@hpe.com
Linus Torvalds