The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
(cherry picked from commit fa83c12132)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The skl+ scalers only sample 12 bits of PIPESRC so we can't
do any plane scaling at all when the pipe source size is >4k.
Make sure the pipe source size is also below the scaler's src
size limits. Might not be 100% accurate, but should at least be
safe. We can refine the limits later if we discover that recent
hw is less restricted.
Cc: stable@vger.kernel.org
Tested-by: Ross Zwisler <zwisler@google.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8357
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 691248d413)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.
Fixes: 0f752b2178 ("drm/i915: Remove the encoder update_prepare()/complete() hooks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
(cherry picked from commit 27ac123b45)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200602.6037-2-ville.syrjala@linux.intel.com
Fixes: 3a47ae201e ("drm/i915/display: Make WARN* drm specific where encoder ptr is available")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 3b6692357f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmQu0TIACgkQ+mJfZA7r
E8osJwf+Pi3tvP1gvum4aVM2IgjA9fF1ZTwwFDqVNwJ2Sfzb93E0XOetoqd0AsEa
z6XYKN5N6P+dA1zLdtV21cmmI3V0iC7UEoZVba98n6Euabh0+7sDcS6o9Y7wDLqJ
DsDL02Vb2OMNjHce+w2lvbiLU52pWh9hVpB47bqS/vjTE9Q+C0Y2PoReyTca6o63
wmOXd1LSNfmaXHfeTRwQdWD7XlHtVmZmH0vn3BSd1ikB0nT7BJIIdc96fody19DI
67CLhQANhesp5si9JIqTWdxSgEibxFP9xDqfx3FOGJfhxWuOPSTs8hk/OjXM3zjr
2uSOnqxZ4a+nrSXy6pG4R4PqvG6ljg==
=Yqy1
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville)
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZC7RR3Laet8ywHRo@intel.com
There's not much point in a static work function having a kernel-doc
comment. Just clean it up and make it a regular comment.
This fixes the kernel-doc warnings:
drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Function
parameter or member 'work' not described in
'intel_tc_port_disconnect_phy_work'
drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Excess function
parameter 'dig_port' description in 'intel_tc_port_disconnect_phy_work'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-1-jani.nikula@intel.com
Include the device and connector information in the SCDC
debugs. Makes it easier to figure out who did what.
v2: Rely on connector->ddc (Maxime)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Observe that intel_pm.[ch] is now purely about clock gating, so rename
them to intel_clock_gating.[ch]. Rename the functions to
intel_clock_gating_*() to follow coding conventions.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-1-jani.nikula@intel.com
According to spec, we should check if output_bpp * pixel_rate is less
than DDI clock * 72, if UHBR is used.
v2: - s/pipe_config/crtc_state/ (Jani Nikula)
- Merged previous patch into that one, to remove empty function(Jani Nikula)
v3: - Make that constraint check to be DSC-related only
- Limit this to only DISPLAY_VER <= 13
v4: - Move constraint check to the top(Vinod Govindapillai)
HSDES: 1406899791
BSPEC: 49259
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324135125.6720-1-stanislav.lisovskiy@intel.com
Replace the hardcoded final numbers in the AUX SYNC/precharge
setup, and derive those from numbers from the (e)DP specs.
The new functions can serve as the single point of truth for
the number of SYNC pulses we use.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Fast wake should use 8 SYNC pulses for the preamble
and 10-16 SYNC pulses for the precharge. Reduce our
fast wake SYNC count to match the maximum value.
We also use the maximum precharge length for normal
AUX transactions.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Function parameter or member 'i915' not described in 'intel_update_watermarks'
drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Excess function parameter 'dev_priv' description in 'intel_update_watermarks'
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-20-lee@kernel.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add'
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add'
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
The encoder update_prepare()/complete() hooks were added to hold a
TC port link reference for all outputs in the atomic state around the
whole modeset enable sequence - thus locking the ports' TC mode - and
set the TBT/DP-alt PLL type corresponding to the current TC mode.
Since nothing depends on the PLL selection before/after then encoder's
pre_pll_enable/post_pll_disable hooks are called, the above steps can be
moved to these hooks, so do that and remove the
update_prepare()/complete() hooks.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com
Bspec requires disabling the DPLLs on TC ports before disconnecting the
port's PHY. Add a post_pll_disable encoder hook and move the call to
disconnect the port's PHY from the post_disable hook to the new hook.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com
The spec requires disabling the PLL on TC ports before disconnecting the
port's PHY. Prepare for that by moving the PLL disabling to the CRTC
disable hook, while disconnecting the PHY will be moved to the
post_pll_disable() encoder hook in the next patch.
v2: Move the call from intel_crtc_disable_noatomic() as well.
Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com
Bspec has updated the TC connect/disconnect sequences, add the required
platform hooks for these.
The difference wrt. the old sequence is the order of taking the PHY
ownership - while holding a port power reference this requires - and
blocking the TC-cold power state.
Bspec: 49294
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-26-imre.deak@intel.com
Enable the power required for the HPD live status register access
instead of depending on the caller blocking the TC-cold power state
(during HW readout and connector probing).
A follow up patch will remove connecting/disconnecting the PHY around
connector probing, so querying the HPD status can happen in this case
without TC-cold being blocked.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-24-imre.deak@intel.com
The spec says to use the CPU ISR registers for DP-alt/TBT HPD detection
on ADLP, so do that instead of using the related IOM/TCSS registers.
Bspec: 55480, 55482, 49212, 49305
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-23-imre.deak@intel.com
Add a hook for platform specific PHY initialization. Move the detection
of modular FIAs to the TGL handler, skipping this on ADLP+ where the
FIAs are always modular, not requiring a detection.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-22-imre.deak@intel.com
Add an assert to each TC PHY hook that their required power domain is
enabled.
While at it add a comment describing the domains used on each platform
and TC mode.
v2: Fix non kernel-doc multiline comments. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-21-imre.deak@intel.com
Simplify tc_cold_block()/unblock() by dropping their power domain
parameter. The power domain depends on the current TC mode, which -
after the previous patch - can't change while the PHY is connected,
holding a TC-cold-off power domain reference. Based on this the domain
can be deducted from the current TC mode instead of having to pass this
as a parameter.
Blocking TC-cold for the PHY HW readout happens before the current TC
mode is determined, so here the initial power domain must be still
manually passed.
For debugging still keep track of the domain used for tc_cold_block()
and verify that it remained the same until tc_cold_unblock().
While at it rename tc_cold_get_power_domain() to
tc_phy_cold_off_domain(), reflecting the name of platform specific hook
added in the next patch.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-19-imre.deak@intel.com
Move blocking/unblocking the TC-cold power state to the platform
specific PHY connect / disconnect hooks. This allows for adjusting the
connect/disconnect sequence as required for each platform.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-17-imre.deak@intel.com
After the previous patch the TC mode in the connect/disconnect functions
is always in sync with the VBT legacy port flag, so for consistency with
the rest of the function check the TC mode instead of the VBT flag.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-16-imre.deak@intel.com
A follow-up patch simplifies the tc_cold_block()/unblock() functions,
dropping the power domain parameter. For this it must be ensured that
the power domain - which depends on the actual TC mode and so the VBT
legacy port flag - can't change while the PHY is in a connected state
and accordingly TC-cold is blocked. Make this so, by fixing up the VBT
legacy flag only in the disconnected TC mode, instead of whenever the
HPD state is retrieved.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-15-imre.deak@intel.com
Factor out a function verifying the PHY connected state in legacy or
DP-alt mode. This is common to all platforms, which can be reused in
platform specific connect hooks added in follow-up patches.
No functional changes.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-13-imre.deak@intel.com
Add generic handlers to connect/disconnect a PHY.
Setting the TC mode to the target mode deducted from the HPD state and -
if connecting to this mode fails - falling back to connecting to the
default (TBT) mode are common to all platforms; move the logic for this
from the ICL specific connect / disconnect handlers to the generic ones.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-12-imre.deak@intel.com
Add a table of TC PHY hooks which can be used to call platform specific
TC PHY handlers, replacing the corresponding if ladders.
Add the hook to retrieve the PHY's HPD live status. Move the common part
fixing up the VBT legacy port flag to the generic helper.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-9-imre.deak@intel.com
Move the TC port specific fields from intel_digital_port to a new
intel_tc_port struct. Pass an intel_tc_port pointer to all static
functions in intel_tc.c keeping dig_port accessible for these via a
pointer stored in the new struct.
The next patch will allocate the intel_tc_port dynamically, allowing
moving the struct definition to intel_tc.c.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com
Arrange the TC PHY HW state setup/query functions into platform
specific and generic groups. This prepares for upcoming patches adding
generic TC PHY handlers and platform specific hooks for these,
replacing the corresponding if ladders.
No functional changes.
v2: Fix non kernel-doc multiline comments. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-2-imre.deak@intel.com
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.
v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
Add function to check if slice design requirements are being
met as defined in Bspec: 49259 in the section
Slice Design Requirement
--v7
-remove full bspec link [Jani]
-rename intel_dsc_check_slice_design_req to
intel_dsc_slice_dimensions_valid [Jani]
--v8
-fix condition to check if slice width and height are
of two
-fix minimum pixel in slice condition
--v10
-condition should be < rather then >= [Uma]
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-7-suraj.kandpal@intel.com
Now that we have laid the groundwork for YUV420 Enablement
we fill up native_420 field in vdsc_cfg and add appropriate
checks wherever required.
---v2
-adding native_422 field as 0 [Vandita]
-filling in second_line_bpg_offset, second_line_offset_adj
and nsl_bpg_offset in vds_cfg when native_420 is true
---v3
-adding display version check to solve igt issue
--v7
-remove is_pipe_dsc check as its always true for D14 [Jani]
--v10
-keep sink capability check [Jani]
-move from !(x == y || w == z) to x !=y && w != z [Jani]
--v11
-avoid native_420 computation if not gen14 [Uma]
--v12
-fix state mismatch issue of compressed_bpp
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-6-suraj.kandpal@intel.com
Implementation of VDSC for YCbCr420.
Add QP tables for 8,10,12 BPC from rc_tables.h in intel_qp_tables.c
(Derived from C-Model, which is given along with DSC1.2a Spec from Vesa)
intel_lookup_range_min/max_qp functons need to take into account the
output format. Based on that appropriate qp table need to be chosen.
Other rc_parameters need to be set where currently values for 444 format
is hardcoded in calculate_rc_parameters( ).
vdsc_cfg struct needs to be filled with output format information, where
these are hardcoded for 444 format.
Bspec: 49259
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-5-suraj.kandpal@intel.com
Hans de Goede